33 files changed, 223 insertions, 188 deletions
diff --git a/Cross/config.sh-arm-linux b/Cross/config.sh-arm-linux
index ef59f91027..947e08be4d 100644
--- a/Cross/config.sh-arm-linux
+++ b/Cross/config.sh-arm-linux
@@ -32,11 +32,11 @@ alignbytes='4'
 aphostname='/bin/hostname'
 api_revision='5'
 api_subversion='0'
-api_version='32'
-api_versionstring='5.32.0'
+api_version='33'
+api_versionstring='5.33.0'
 ar='ar'
-archlib='/usr/lib/perl5/5.32.0/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.32.0/armv4l-linux'
+archlib='/usr/lib/perl5/5.33.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.33.0/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -55,7 +55,7 @@ castflags='0'
 cat='cat'
 cc='cc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.32.0/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.33.0/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -824,7 +824,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.32.0/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.33.0/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -832,13 +832,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.32.0'
+installprivlib='./install_me_here/usr/lib/perl5/5.33.0'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.32.0'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.33.0'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -972,8 +972,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.32.0'
-privlibexp='/usr/lib/perl5/5.32.0'
+privlib='/usr/lib/perl5/5.33.0'
+privlibexp='/usr/lib/perl5/5.33.0'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -1038,17 +1038,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.32.0'
+sitelib='/usr/lib/perl5/site_perl/5.33.0'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.32.0'
+sitelibexp='/usr/lib/perl5/site_perl/5.33.0'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -1178,8 +1178,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.32.0'
-version_patchlevel_string='version 32 subversion 0'
+version='5.33.0'
+version_patchlevel_string='version 33 subversion 0'
 versiononly='undef'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1192,10 +1192,10 @@ config_arg0='Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=32
+PERL_VERSION=33
 PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=32
+PERL_API_VERSION=33
 PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/Cross/config.sh-arm-linux-n770 b/Cross/config.sh-arm-linux-n770
index 281d59f86e..9e95faf823 100644
--- a/Cross/config.sh-arm-linux-n770
+++ b/Cross/config.sh-arm-linux-n770
@@ -32,11 +32,11 @@ alignbytes='4'
 aphostname='/bin/hostname'
 api_revision='5'
 api_subversion='0'
-api_version='32'
-api_versionstring='5.32.0'
+api_version='33'
+api_versionstring='5.33.0'
 ar='ar'
-archlib='/usr/lib/perl5/5.32.0/armv4l-linux'
-archlibexp='/usr/lib/perl5/5.32.0/armv4l-linux'
+archlib='/usr/lib/perl5/5.33.0/armv4l-linux'
+archlibexp='/usr/lib/perl5/5.33.0/armv4l-linux'
 archname64=''
 archname='armv4l-linux'
 archobjs=''
@@ -54,7 +54,7 @@ castflags='0'
 cat='cat'
 cc='arm-none-linux-gnueabi-gcc'
 cccdlflags='-fpic'
-ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.32.0/armv4l-linux/CORE'
+ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.33.0/armv4l-linux/CORE'
 ccflags='-fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
 ccname='arm-linux-gcc'
@@ -822,7 +822,7 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='./install_me_here/usr/lib/perl5/5.32.0/armv4l-linux'
+installarchlib='./install_me_here/usr/lib/perl5/5.33.0/armv4l-linux'
 installbin='./install_me_here/usr/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -830,13 +830,13 @@ installman1dir='./install_me_here/usr/share/man/man1'
 installman3dir='./install_me_here/usr/share/man/man3'
 installprefix='./install_me_here/usr'
 installprefixexp='./install_me_here/usr'
-installprivlib='./install_me_here/usr/lib/perl5/5.32.0'
+installprivlib='./install_me_here/usr/lib/perl5/5.33.0'
 installscript='./install_me_here/usr/bin'
-installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+installsitearch='./install_me_here/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
 installsitebin='./install_me_here/usr/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.32.0'
+installsitelib='./install_me_here/usr/lib/perl5/site_perl/5.33.0'
 installsiteman1dir='./install_me_here/usr/share/man/man1'
 installsiteman3dir='./install_me_here/usr/share/man/man3'
 installsitescript='./install_me_here/usr/bin'
@@ -970,8 +970,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/usr/lib/perl5/5.32.0'
-privlibexp='/usr/lib/perl5/5.32.0'
+privlib='/usr/lib/perl5/5.33.0'
+privlibexp='/usr/lib/perl5/5.33.0'
 procselfexe='"/proc/self/exe"'
 prototype='define'
 ptrsize='4'
@@ -1036,17 +1036,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 6, 17, 29, 31, 0'
 sig_size='68'
 signal_t='void'
-sitearch='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
-sitearchexp='/usr/lib/perl5/site_perl/5.32.0/armv4l-linux'
+sitearch='/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
+sitearchexp='/usr/lib/perl5/site_perl/5.33.0/armv4l-linux'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/usr/lib/perl5/site_perl/5.32.0'
+sitelib='/usr/lib/perl5/site_perl/5.33.0'
 sitelib_stem='/usr/lib/perl5/site_perl'
-sitelibexp='/usr/lib/perl5/site_perl/5.32.0'
+sitelibexp='/usr/lib/perl5/site_perl/5.33.0'
 siteman1dir='/usr/share/man/man1'
 siteman1direxp='/usr/share/man/man1'
 siteman3dir='/usr/share/man/man3'
@@ -1176,8 +1176,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.32.0'
-version_patchlevel_string='version 32 subversion 0'
+version='5.33.0'
+version_patchlevel_string='version 33 subversion 0'
 versiononly='undef'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1190,10 +1190,10 @@ config_arg0='Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=32
+PERL_VERSION=33
 PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=32
+PERL_API_VERSION=33
 PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/INSTALL b/INSTALL
index cdbb45e949..9399745f1f 100644
--- a/INSTALL
+++ b/INSTALL
@@ -615,7 +615,7 @@ The directories set up by Configure fall into three broad categories.
 
 =item Directories for the perl distribution
 
-By default, Configure will use the following directories for 5.32.0.
+By default, Configure will use the following directories for 5.33.0.
 $version is the full perl version number, including subversion, e.g.
 5.12.3, and $archname is a string like sun4-sunos,
 determined by Configure.  The full definitions of all Configure
@@ -2437,7 +2437,7 @@ L<https://www.chiark.greenend.org.uk/~sgtatham/bugs.html>
 
 =head1 Coexistence with earlier versions of perl 5
 
-Perl 5.32.0 is not binary compatible with earlier versions of Perl.
+Perl 5.33.0 is not binary compatible with earlier versions of Perl.
 In other words, you will have to recompile your XS modules.
 
 In general, you can usually safely upgrade from one stable version of Perl
@@ -2512,9 +2512,9 @@ won't interfere with another version.  (The defaults guarantee this for
 libraries after 5.6.0, but not for executables. TODO?)  One convenient
 way to do this is by using a separate prefix for each version, such as
 
-	sh Configure -Dprefix=/opt/perl5.32.0
+	sh Configure -Dprefix=/opt/perl5.33.0
 
-and adding /opt/perl5.32.0/bin to the shell PATH variable.  Such users
+and adding /opt/perl5.33.0/bin to the shell PATH variable.  Such users
 may also wish to add a symbolic link /usr/local/bin/perl so that
 scripts can still start with #!/usr/local/bin/perl.
 
@@ -2529,11 +2529,11 @@ yet.
 
 =head2 Upgrading from 5.31.8 or earlier
 
-B<Perl 5.32.0 may not be binary compatible with Perl 5.31.8 or
+B<Perl 5.33.0 may not be binary compatible with Perl 5.31.8 or
 earlier Perl releases.>  Perl modules having binary parts
 (meaning that a C compiler is used) will have to be recompiled to be
-used with 5.32.0.  If you find you do need to rebuild an extension with
-5.32.0, you may safely do so without disturbing the older
+used with 5.33.0.  If you find you do need to rebuild an extension with
+5.33.0, you may safely do so without disturbing the older
 installations.  (See L<"Coexistence with earlier versions of perl 5">
 above.)
 
@@ -2566,15 +2566,15 @@ Firstly, the bare minimum to run this script
      print("$f\n");
   }
 
-in Linux with perl-5.32.0 is as follows (under $Config{prefix}):
+in Linux with perl-5.33.0 is as follows (under $Config{prefix}):
 
   ./bin/perl
-  ./lib/perl5/5.32.0/strict.pm
-  ./lib/perl5/5.32.0/warnings.pm
-  ./lib/perl5/5.32.0/i686-linux/File/Glob.pm
-  ./lib/perl5/5.32.0/feature.pm
-  ./lib/perl5/5.32.0/XSLoader.pm
-  ./lib/perl5/5.32.0/i686-linux/auto/File/Glob/Glob.so
+  ./lib/perl5/5.33.0/strict.pm
+  ./lib/perl5/5.33.0/warnings.pm
+  ./lib/perl5/5.33.0/i686-linux/File/Glob.pm
+  ./lib/perl5/5.33.0/feature.pm
+  ./lib/perl5/5.33.0/XSLoader.pm
+  ./lib/perl5/5.33.0/i686-linux/auto/File/Glob/Glob.so
 
 Secondly, for perl-5.10.1, the Debian perl-base package contains 591
 files, (of which 510 are for lib/unicore) totaling about 3.5MB in its
diff --git a/META.json b/META.json
index 458f23fa65..adbcd6396b 100644
--- a/META.json
+++ b/META.json
@@ -117,7 +117,7 @@
          "vxs.inc"
       ]
    },
-   "release_status" : "stable",
+   "release_status" : "unstable",
    "resources" : {
       "bugtracker" : {
          "web" : "https://github.com/Perl/perl5/issues"
@@ -130,6 +130,6 @@
          "url" : "https://github.com/Perl/perl5"
       }
    },
-   "version" : "5.032000",
+   "version" : "5.033000",
    "x_serialization_backend" : "JSON::PP version 4.04"
 }
diff --git a/META.yml b/META.yml
index 505b00a146..aa05f732a4 100644
--- a/META.yml
+++ b/META.yml
@@ -117,5 +117,5 @@ resources:
   homepage: https://www.perl.org/
   license: https://dev.perl.org/licenses/
   repository: https://github.com/Perl/perl5
-version: '5.032000'
+version: '5.033000'
 x_serialization_backend: 'CPAN::Meta::YAML version 0.018'
diff --git a/NetWare/Makefile b/NetWare/Makefile
index 7cf234c433..279e855a03 100644
--- a/NetWare/Makefile
+++ b/NetWare/Makefile
@@ -86,7 +86,7 @@ NLM_VERSION    = 3,20,0
 
 
 # Here comes the CW tools - TO BE FILLED TO BUILD WITH CW -
-MODULE_DESC     = "Perl 5.32.0 for NetWare"
+MODULE_DESC     = "Perl 5.33.0 for NetWare"
 CCTYPE          = CodeWarrior
 C_COMPILER		= mwccnlm -c
 CPP_COMPILER	= mwccnlm
@@ -462,7 +462,7 @@ INST_NW_TOP2 = $(INST_NW_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-INST_VER	= \5.32.0
+INST_VER	= \5.33.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
diff --git a/NetWare/config_H.wc b/NetWare/config_H.wc
index 18a1d02555..0e24bae7ed 100644
--- a/NetWare/config_H.wc
+++ b/NetWare/config_H.wc
@@ -887,7 +887,7 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "c:\\perl\\5.32.0\\lib\\NetWare-x86-multi-thread"		/**/
+#define ARCHLIB "c:\\perl\\5.33.0\\lib\\NetWare-x86-multi-thread"		/**/
 /*#define ARCHLIB_EXP ""	/**/
 
 /* ARCHNAME:
@@ -918,8 +918,8 @@
  *	This symbol is the filename expanded version of the BIN symbol, for
  *	programs that do not want to deal with that at run-time.
  */
-#define BIN "c:\\perl\\5.32.0\\bin\\NetWare-x86-multi-thread"	/**/
-#define BIN_EXP "c:\\perl\\5.32.0\\bin\\NetWare-x86-multi-thread"	/**/
+#define BIN "c:\\perl\\5.33.0\\bin\\NetWare-x86-multi-thread"	/**/
+#define BIN_EXP "c:\\perl\\5.33.0\\bin\\NetWare-x86-multi-thread"	/**/
 
 /* BYTEORDER:
  *	This symbol holds the hexadecimal constant defined in byteorder,
@@ -2878,7 +2878,7 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "c:\\perl\\site\\5.32.0\\lib\\NetWare-x86-multi-thread"		/**/
+#define SITEARCH "c:\\perl\\site\\5.33.0\\lib\\NetWare-x86-multi-thread"		/**/
 /*#define SITEARCH_EXP ""	/**/
 
 /* SITELIB:
@@ -2901,7 +2901,7 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "c:\\perl\\site\\5.32.0\\lib"		/**/
+#define SITELIB "c:\\perl\\site\\5.33.0\\lib"		/**/
 /*#define SITELIB_EXP ""	/**/
 #define SITELIB_STEM ""		/**/
 
diff --git a/Porting/config.sh b/Porting/config.sh
index f7f212dd24..1b1afcc739 100644
--- a/Porting/config.sh
+++ b/Porting/config.sh
@@ -45,11 +45,11 @@ alignbytes='8'
 aphostname=''
 api_revision='5'
 api_subversion='0'
-api_version='32'
-api_versionstring='5.32.0'
+api_version='33'
+api_versionstring='5.33.0'
 ar='ar'
-archlib='/opt/perl/lib/5.32.0/x86_64-linux'
-archlibexp='/opt/perl/lib/5.32.0/x86_64-linux'
+archlib='/opt/perl/lib/5.33.0/x86_64-linux'
+archlibexp='/opt/perl/lib/5.33.0/x86_64-linux'
 archname64=''
 archname='x86_64-linux'
 archobjs=''
@@ -848,7 +848,7 @@ incpath=''
 incpth='/usr/lib/gcc/x86_64-linux-gnu/4.9/include /usr/local/include /usr/lib/gcc/x86_64-linux-gnu/4.9/include-fixed /usr/include/x86_64-linux-gnu /usr/include'
 inews=''
 initialinstalllocation='/opt/perl/bin'
-installarchlib='/opt/perl/lib/5.32.0/x86_64-linux'
+installarchlib='/opt/perl/lib/5.33.0/x86_64-linux'
 installbin='/opt/perl/bin'
 installhtml1dir=''
 installhtml3dir=''
@@ -856,13 +856,13 @@ installman1dir='/opt/perl/man/man1'
 installman3dir='/opt/perl/man/man3'
 installprefix='/opt/perl'
 installprefixexp='/opt/perl'
-installprivlib='/opt/perl/lib/5.32.0'
+installprivlib='/opt/perl/lib/5.33.0'
 installscript='/opt/perl/bin'
-installsitearch='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
+installsitearch='/opt/perl/lib/site_perl/5.33.0/x86_64-linux'
 installsitebin='/opt/perl/bin'
 installsitehtml1dir=''
 installsitehtml3dir=''
-installsitelib='/opt/perl/lib/site_perl/5.32.0'
+installsitelib='/opt/perl/lib/site_perl/5.33.0'
 installsiteman1dir='/opt/perl/man/man1'
 installsiteman3dir='/opt/perl/man/man3'
 installsitescript='/opt/perl/bin'
@@ -987,7 +987,7 @@ perl_patchlevel=''
 perl_static_inline='static __inline__'
 perladmin='yourname@yourhost.yourplace.com'
 perllibs='-lpthread -lnsl -ldl -lm -lcrypt -lutil -lc'
-perlpath='/opt/perl/bin/perl5.32.0'
+perlpath='/opt/perl/bin/perl5.33.0'
 pg='pg'
 phostname=''
 pidtype='pid_t'
@@ -996,8 +996,8 @@ pmake=''
 pr=''
 prefix='/opt/perl'
 prefixexp='/opt/perl'
-privlib='/opt/perl/lib/5.32.0'
-privlibexp='/opt/perl/lib/5.32.0'
+privlib='/opt/perl/lib/5.33.0'
+privlibexp='/opt/perl/lib/5.33.0'
 procselfexe='"/proc/self/exe"'
 ptrsize='8'
 quadkind='2'
@@ -1062,17 +1062,17 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 31, 0'
 sig_size='69'
 signal_t='void'
-sitearch='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
-sitearchexp='/opt/perl/lib/site_perl/5.32.0/x86_64-linux'
+sitearch='/opt/perl/lib/site_perl/5.33.0/x86_64-linux'
+sitearchexp='/opt/perl/lib/site_perl/5.33.0/x86_64-linux'
 sitebin='/opt/perl/bin'
 sitebinexp='/opt/perl/bin'
 sitehtml1dir=''
 sitehtml1direxp=''
 sitehtml3dir=''
 sitehtml3direxp=''
-sitelib='/opt/perl/lib/site_perl/5.32.0'
+sitelib='/opt/perl/lib/site_perl/5.33.0'
 sitelib_stem='/opt/perl/lib/site_perl'
-sitelibexp='/opt/perl/lib/site_perl/5.32.0'
+sitelibexp='/opt/perl/lib/site_perl/5.33.0'
 siteman1dir='/opt/perl/man/man1'
 siteman1direxp='/opt/perl/man/man1'
 siteman3dir='/opt/perl/man/man3'
@@ -1098,7 +1098,7 @@ src='.'
 ssizetype='ssize_t'
 st_ino_sign='1'
 st_ino_size='8'
-startperl='#!/opt/perl/bin/perl5.32.0'
+startperl='#!/opt/perl/bin/perl5.33.0'
 startsh='#!/bin/sh'
 static_ext=' '
 stdchar='char'
@@ -1208,8 +1208,8 @@ vendorprefix=''
 vendorprefixexp=''
 vendorscript=''
 vendorscriptexp=''
-version='5.32.0'
-version_patchlevel_string='version 32 subversion 0'
+version='5.33.0'
+version_patchlevel_string='version 33 subversion 0'
 versiononly='define'
 vi=''
 xlibpth='/usr/lib/386 /lib/386'
@@ -1218,10 +1218,10 @@ yaccflags=''
 zcat=''
 zip='zip'
 PERL_REVISION=5
-PERL_VERSION=32
+PERL_VERSION=33
 PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=32
+PERL_API_VERSION=33
 PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=''
 PERL_CONFIG_SH=true
diff --git a/Porting/config_H b/Porting/config_H
index 9feb0d9274..34bb20f896 100644
--- a/Porting/config_H
+++ b/Porting/config_H
@@ -1239,8 +1239,8 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define ARCHLIB "/opt/perl/lib/5.32.0/x86_64-linux"		/**/
-#define ARCHLIB_EXP "/opt/perl/lib/5.32.0/x86_64-linux"		/**/
+#define ARCHLIB "/opt/perl/lib/5.33.0/x86_64-linux"		/**/
+#define ARCHLIB_EXP "/opt/perl/lib/5.33.0/x86_64-linux"		/**/
 
 /* BIN:
  *	This symbol holds the path of the bin directory where the package will
@@ -1293,8 +1293,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/opt/perl/lib/5.32.0"		/**/
-#define PRIVLIB_EXP "/opt/perl/lib/5.32.0"		/**/
+#define PRIVLIB "/opt/perl/lib/5.33.0"		/**/
+#define PRIVLIB_EXP "/opt/perl/lib/5.33.0"		/**/
 
 /* SITEARCH:
  *	This symbol contains the name of the private library for this package.
@@ -1311,8 +1311,8 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define SITEARCH "/opt/perl/lib/site_perl/5.32.0/x86_64-linux"		/**/
-#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.32.0/x86_64-linux"		/**/
+#define SITEARCH "/opt/perl/lib/site_perl/5.33.0/x86_64-linux"		/**/
+#define SITEARCH_EXP "/opt/perl/lib/site_perl/5.33.0/x86_64-linux"		/**/
 
 /* SITELIB:
  *	This symbol contains the name of the private library for this package.
@@ -1334,8 +1334,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/opt/perl/lib/site_perl/5.32.0"		/**/
-#define SITELIB_EXP "/opt/perl/lib/site_perl/5.32.0"		/**/
+#define SITELIB "/opt/perl/lib/site_perl/5.33.0"		/**/
+#define SITELIB_EXP "/opt/perl/lib/site_perl/5.33.0"		/**/
 #define SITELIB_STEM "/opt/perl/lib/site_perl"		/**/
 
 /* PERL_VENDORARCH:
@@ -4109,7 +4109,7 @@
  *	script to make sure (one hopes) that it runs with perl and not
  *	some shell.
  */
-#define STARTPERL "#!/opt/perl/bin/perl5.32.0"		/**/
+#define STARTPERL "#!/opt/perl/bin/perl5.33.0"		/**/
 
 /* HAS_STDIO_STREAM_ARRAY:
  *	This symbol, if defined, tells that there is an array
diff --git a/Porting/perldelta_template.pod b/Porting/perldelta_template.pod
index 5839914413..64c4a1877b 100644
--- a/Porting/perldelta_template.pod
+++ b/Porting/perldelta_template.pod
@@ -403,7 +403,7 @@ died, add a short obituary here.
 
 XXX Generate this with:
 
-  perl Porting/acknowledgements.pl v5.32.0..HEAD
+  perl Porting/acknowledgements.pl v5.33.0..HEAD
 
 =head1 Reporting Bugs
 
diff --git a/Porting/todo.pod b/Porting/todo.pod
index 36bee56671..3935bdc0b7 100644
--- a/Porting/todo.pod
+++ b/Porting/todo.pod
@@ -486,7 +486,7 @@ Natively 64-bit systems need neither -Duse64bitint nor -Duse64bitall.
 On these systems, it might be the default compilation mode, and there
 is currently no guarantee that passing no use64bitall option to the
 Configure process will build a 32bit perl. Implementing -Duse32bit*
-options would be nice for perl 5.32.0.
+options would be nice for perl 5.33.0.
 
 =head2 Profile Perl - am I hot or not?
 
@@ -1189,7 +1189,7 @@ L<http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2013-01/msg00339.html>
 =head1 Big projects
 
 Tasks that will get your name mentioned in the description of the "Highlights
-of 5.32.0"
+of 5.33.0"
 
 =head2 make ithreads more robust
 
diff --git a/README.haiku b/README.haiku
index 0fbb9e712f..0a1fcd7eb0 100644
--- a/README.haiku
+++ b/README.haiku
@@ -22,9 +22,9 @@ The build procedure is completely standard:
 Make perl executable and create a symlink for libperl:
 
   chmod a+x /boot/common/bin/perl
-  cd /boot/common/lib; ln -s perl5/5.32.0/BePC-haiku/CORE/libperl.so .
+  cd /boot/common/lib; ln -s perl5/5.33.0/BePC-haiku/CORE/libperl.so .
 
-Replace C<5.32.0> with your respective version of Perl.
+Replace C<5.33.0> with your respective version of Perl.
 
 =head1 KNOWN PROBLEMS
 
diff --git a/README.macosx b/README.macosx
index 6e84a8769d..e50d85df3d 100644
--- a/README.macosx
+++ b/README.macosx
@@ -10,9 +10,9 @@ perlmacosx - Perl under Mac OS X
 
 This document briefly describes Perl under Mac OS X.
 
-  curl -O https://www.cpan.org/src/perl-5.32.0.tar.gz
-  tar -xzf perl-5.32.0.tar.gz
-  cd perl-5.32.0
+  curl -O https://www.cpan.org/src/perl-5.33.0.tar.gz
+  tar -xzf perl-5.33.0.tar.gz
+  cd perl-5.33.0
   ./Configure -des -Dprefix=/usr/local/
   make
   make test
@@ -20,7 +20,7 @@ This document briefly describes Perl under Mac OS X.
 
 =head1 DESCRIPTION
 
-The latest Perl release (5.32.0 as of this writing) builds without changes
+The latest Perl release (5.33.0 as of this writing) builds without changes
 under all versions of Mac OS X from 10.3 "Panther" onwards. 
 
 In order to build your own version of Perl you will need 'make',
diff --git a/README.os2 b/README.os2
index 6917b5ded5..8d3c286dd0 100644
--- a/README.os2
+++ b/README.os2
@@ -619,7 +619,7 @@ C<set PERLLIB_PREFIX> in F<Config.sys>, see L</"C<PERLLIB_PREFIX>">.
 
 =item Additional Perl modules
 
-  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.32.0/
+  unzip perl_ste.zip -d f:/perllib/lib/site_perl/5.33.0/
 
 Same remark as above applies.  Additionally, if this directory is not
 one of directories on @INC (and @INC is influenced by C<PERLLIB_PREFIX>), you
diff --git a/README.os390 b/README.os390
index a06e93f956..443963cb5e 100644
--- a/README.os390
+++ b/README.os390
@@ -452,7 +452,7 @@ Updated 12 March    2001 to mention //'SYS1.TCPPARMS(TCPDATA)'.
 
 Updated 28 November 2001 for broken URLs.
 
-Updated 03 October  2019 for perl-5.32.0+
+Updated 03 October  2019 for perl-5.33.0+
 
 =cut
 
diff --git a/README.vms b/README.vms
index 5d94ad8ab3..62f34dd5b8 100644
--- a/README.vms
+++ b/README.vms
@@ -142,11 +142,11 @@ You may need to set up a foreign symbol for the unpacking utility of
 choice.  Once you have done so, use a command like the following to
 unpack the archive:
 
-    vmstar -xvf perl-5^.32^.0.tar
+    vmstar -xvf perl-5^.33^.0.tar
 
 Then set default to the top-level source directory like so:
 
-    set default [.perl-5^.32^.0]
+    set default [.perl-5^.33^.0]
 
 and proceed with configuration as described in the next section.
 
diff --git a/README.win32 b/README.win32
index cc3b6b868c..128d517d6c 100644
--- a/README.win32
+++ b/README.win32
@@ -399,7 +399,7 @@ Be sure to read the instructions near the top of the makefiles carefully.
 Type "dmake" ("gmake" for GNU make, or "nmake" if you are using that make).
 
 This should build everything.  Specifically, it will create perl.exe,
-perl532.dll at the perl toplevel, and various other extension dll's
+perl533.dll at the perl toplevel, and various other extension dll's
 under the lib\auto directory.  If the build fails for any reason, make
 sure you have done the previous steps correctly.
 
diff --git a/dist/Module-CoreList/Changes b/dist/Module-CoreList/Changes
index a5d3135363..39124e3a91 100644
--- a/dist/Module-CoreList/Changes
+++ b/dist/Module-CoreList/Changes
@@ -1,3 +1,6 @@
+5.20200720
+  - Updated for v5.33.0
+
 5.20200620
   - Updated for v5.32.0
 
diff --git a/dist/Module-CoreList/lib/Module/CoreList.pm b/dist/Module-CoreList/lib/Module/CoreList.pm
index deceaa060f..cc749fd106 100644
--- a/dist/Module-CoreList/lib/Module/CoreList.pm
+++ b/dist/Module-CoreList/lib/Module/CoreList.pm
@@ -366,6 +366,7 @@ sub changes_between {
     5.028003 => '2020-06-01',
     5.030003 => '2020-06-01',
     5.032000 => '2020-06-20',
+    5.033000 => '2020-07-20',
   );
 
 for my $version ( sort { $a <=> $b } keys %released ) {
@@ -17515,6 +17516,15 @@ for my $version ( sort { $a <=> $b } keys %released ) {
         removed => {
         }
     },
+    5.033000 => {
+        delta_from => 5.032000,
+        changed => {
+            'B::Op_private'         => '5.033000',
+            'Config'                => '5.033',
+        },
+        removed => {
+        }
+    },
 );
 
 sub is_core
@@ -18636,6 +18646,13 @@ sub is_core
         removed => {
         }
     },
+    5.033000 => {
+        delta_from => 5.032,
+        changed => {
+        },
+        removed => {
+        }
+    },
 );
 
 %deprecated = _undelta(\%deprecated);
diff --git a/dist/Module-CoreList/lib/Module/CoreList/Utils.pm b/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
index 4de1cfef40..8ed651d733 100644
--- a/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
+++ b/dist/Module-CoreList/lib/Module/CoreList/Utils.pm
@@ -1622,6 +1622,13 @@ my %delta = (
         removed => {
         }
     },
+    5.033000 => {
+        delta_from => 5.032,
+        changed => {
+        },
+        removed => {
+        }
+    },
 );
 
 %utilities = Module::CoreList::_undelta(\%delta);
diff --git a/hints/catamount.sh b/hints/catamount.sh
index be3f8f6fcc..10ac2b16c8 100644
--- a/hints/catamount.sh
+++ b/hints/catamount.sh
@@ -31,11 +31,11 @@
 # mkdir -p /opt/perl-catamount
 # mkdir -p /opt/perl-catamount/include
 # mkdir -p /opt/perl-catamount/lib
-# mkdir -p /opt/perl-catamount/lib/perl5/5.32.0
+# mkdir -p /opt/perl-catamount/lib/perl5/5.33.0
 # mkdir -p /opt/perl-catamount/bin
 # cp *.h /opt/perl-catamount/include
 # cp libperl.a /opt/perl-catamount/lib
-# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.32.0
+# cp -pr lib/* /opt/perl-catamount/lib/perl5/5.33.0
 # cp miniperl perl run.sh cc.sh /opt/perl-catamount/lib
 #
 # With the headers and the libperl.a you can embed Perl to your Catamount
diff --git a/lib/B/Op_private.pm b/lib/B/Op_private.pm
index 54d00460f2..5e771514fb 100644
--- a/lib/B/Op_private.pm
+++ b/lib/B/Op_private.pm
@@ -118,7 +118,7 @@ package B::Op_private;
 our %bits;
 
 
-our $VERSION = "5.032000";
+our $VERSION = "5.033000";
 
 $bits{$_}{3} = 'OPpENTERSUB_AMPER' for qw(entersub rv2cv);
 $bits{$_}{6} = 'OPpENTERSUB_DB' for qw(entersub rv2cv);
diff --git a/lib/feature.pm b/lib/feature.pm
index e6f467e9e4..c2733d9b41 100644
--- a/lib/feature.pm
+++ b/lib/feature.pm
@@ -5,7 +5,7 @@
 
 package feature;
 
-our $VERSION = '1.58';
+our $VERSION = '1.59';
 
 our %feature = (
     fc              => 'feature_fc',
@@ -53,6 +53,8 @@ $feature_bundle{"5.29"} = $feature_bundle{"5.27"};
 $feature_bundle{"5.30"} = $feature_bundle{"5.27"};
 $feature_bundle{"5.31"} = $feature_bundle{"5.27"};
 $feature_bundle{"5.32"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.33"} = $feature_bundle{"5.27"};
+$feature_bundle{"5.34"} = $feature_bundle{"5.27"};
 $feature_bundle{"5.9.5"} = $feature_bundle{"5.10"};
 my %noops = (
     postderef => 1,
@@ -428,6 +430,10 @@ The following feature bundles are available:
             unicode_eval evalbytes current_sub fc
             postderef_qq bitwise indirect
 
+  :5.34     say state switch unicode_strings
+            unicode_eval evalbytes current_sub fc
+            postderef_qq bitwise indirect
+
 The C<:default> bundle represents the feature set that is enabled before
 any C<use feature> or C<no feature> declaration.
 
diff --git a/patchlevel.h b/patchlevel.h
index dea542dc44..07804d9c1b 100644
--- a/patchlevel.h
+++ b/patchlevel.h
@@ -14,7 +14,7 @@
  * exactly on the third column */
 
 #define PERL_REVISION	5		/* age */
-#define PERL_VERSION	32		/* epoch */
+#define PERL_VERSION	33		/* epoch */
 #define PERL_SUBVERSION	0		/* generation */
 
 /* The following numbers describe the earliest compatible version of
@@ -35,7 +35,7 @@
    changing them should not be necessary.
 */
 #define PERL_API_REVISION	5
-#define PERL_API_VERSION	32
+#define PERL_API_VERSION	33
 #define PERL_API_SUBVERSION	0
 /*
    XXX Note:  The selection of non-default Configure options, such
diff --git a/plan9/config.plan9 b/plan9/config.plan9
index d31b328d91..0c778e5da3 100644
--- a/plan9/config.plan9
+++ b/plan9/config.plan9
@@ -3131,8 +3131,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/sys/lib/perl/5.32.0"		/**/
-#define PRIVLIB_EXP "/sys/lib/perl/5.32.0"		/**/
+#define PRIVLIB "/sys/lib/perl/5.33.0"		/**/
+#define PRIVLIB_EXP "/sys/lib/perl/5.33.0"		/**/
 
 /* PTRSIZE:
  *	This symbol contains the size of a pointer, so that the C preprocessor
@@ -3259,9 +3259,9 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/sys/lib/perl/5.32.0/site_perl"		/**/
-#define SITELIB_EXP "/sys/lib/perl/5.32.0/site_perl"		/**/
-#define SITELIB_STEM "/sys/lib/perl/5.32.0/site_perl"		/**/
+#define SITELIB "/sys/lib/perl/5.33.0/site_perl"		/**/
+#define SITELIB_EXP "/sys/lib/perl/5.33.0/site_perl"		/**/
+#define SITELIB_STEM "/sys/lib/perl/5.33.0/site_perl"		/**/
 
 /* Size_t_size:
  *	This symbol holds the size of a Size_t in bytes.
diff --git a/plan9/config_sh.sample b/plan9/config_sh.sample
index 813845a9a4..2b7aac31d6 100644
--- a/plan9/config_sh.sample
+++ b/plan9/config_sh.sample
@@ -32,11 +32,11 @@ alignbytes='4'
 aphostname='/bin/uname -n'
 api_revision='5'
 api_subversion='0'
-api_version='32'
-api_versionstring='5.32.0'
+api_version='33'
+api_versionstring='5.33.0'
 ar='ar'
-archlib='/sys/lib/perl5/5.32.0/386'
-archlibexp='/sys/lib/perl5/5.32.0/386'
+archlib='/sys/lib/perl5/5.33.0/386'
+archlibexp='/sys/lib/perl5/5.33.0/386'
 archname64=''
 archname='386'
 archobjs=''
@@ -818,17 +818,17 @@ inc_version_list=' '
 inc_version_list_init='0'
 incpath=''
 inews=''
-installarchlib='/sys/lib/perl/5.32.0/386'
+installarchlib='/sys/lib/perl/5.33.0/386'
 installbin='/usr/bin'
 installman1dir='/sys/man/1pub'
 installman3dir='/sys/man/2pub'
 installprefix='/usr'
 installprefixexp='/usr'
-installprivlib='/sys/lib/perl/5.32.0'
+installprivlib='/sys/lib/perl/5.33.0'
 installscript='/usr/bin'
-installsitearch='/sys/lib/perl/5.32.0/site_perl/386'
+installsitearch='/sys/lib/perl/5.33.0/site_perl/386'
 installsitebin='/usr/bin'
-installsitelib='/sys/lib/perl/5.32.0/site_perl'
+installsitelib='/sys/lib/perl/5.33.0/site_perl'
 installstyle='lib/perl5'
 installusrbinperl='undef'
 installvendorarch=''
@@ -953,8 +953,8 @@ pmake=''
 pr=''
 prefix='/usr'
 prefixexp='/usr'
-privlib='/sys/lib/perl/5.32.0'
-privlibexp='/sys/lib/perl/5.32.0'
+privlib='/sys/lib/perl/5.33.0'
+privlibexp='/sys/lib/perl/5.33.0'
 procselfexe=''
 prototype='define'
 ptrsize='4'
@@ -1019,13 +1019,13 @@ sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
 sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 0'
 sig_size='50'
 signal_t='void'
-sitearch='/sys/lib/perl/5.32.0/site_perl/386'
+sitearch='/sys/lib/perl/5.33.0/site_perl/386'
 sitearchexp='/sys/lib/perl/site_perl/386'
 sitebin='/usr/bin'
 sitebinexp='/usr/bin'
-sitelib='/sys/lib/perl/5.32.0/site_perl'
-sitelib_stem='/sys/lib/perl/5.32.0/site_perl'
-sitelibexp='/sys/lib/perl/5.32.0/site_perl'
+sitelib='/sys/lib/perl/5.33.0/site_perl'
+sitelib_stem='/sys/lib/perl/5.33.0/site_perl'
+sitelibexp='/sys/lib/perl/5.33.0/site_perl'
 siteprefix='/usr'
 siteprefixexp='/usr'
 sizesize='4'
@@ -1139,8 +1139,8 @@ vendorlib_stem=''
 vendorlibexp=''
 vendorprefix=''
 vendorprefixexp=''
-version='5.32.0'
-version_patchlevel_string='version 32 subversion 0'
+version='5.33.0'
+version_patchlevel_string='version 33 subversion 0'
 versiononly='undef'
 vi=''
 xlibpth=''
@@ -1153,10 +1153,10 @@ config_arg0='./Configure'
 config_args=''
 config_argc=0
 PERL_REVISION=5
-PERL_VERSION=32
+PERL_VERSION=33
 PERL_SUBVERSION=0
 PERL_API_REVISION=5
-PERL_API_VERSION=32
+PERL_API_VERSION=33
 PERL_API_SUBVERSION=0
 PERL_PATCHLEVEL=
 PERL_CONFIG_SH=true
diff --git a/regen/feature.pl b/regen/feature.pl
index 667f524a7c..f312e8160e 100755
--- a/regen/feature.pl
+++ b/regen/feature.pl
@@ -69,6 +69,8 @@ my %feature_bundle = (
 		    evalbytes current_sub fc postderef_qq bitwise indirect)],
     "5.31"   =>	[qw(say state switch unicode_strings unicode_eval
 		    evalbytes current_sub fc postderef_qq bitwise indirect)],
+    "5.33"   =>	[qw(say state switch unicode_strings unicode_eval
+		    evalbytes current_sub fc postderef_qq bitwise indirect)],
 );
 
 my @noops = qw( postderef lexical_subs );
@@ -469,7 +471,7 @@ read_only_bottom_close_and_rename($h);
 __END__
 package feature;
 
-our $VERSION = '1.58';
+our $VERSION = '1.59';
 
 FEATURES
 
diff --git a/uconfig.h b/uconfig.h
index 7d3db32309..24e0a35813 100644
--- a/uconfig.h
+++ b/uconfig.h
@@ -1229,8 +1229,8 @@
  *	This symbol contains the ~name expanded version of ARCHLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-/*#define ARCHLIB "/usr/local/lib/perl5/5.32/unknown"		/ **/
-/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.32/unknown"		/ **/
+/*#define ARCHLIB "/usr/local/lib/perl5/5.33/unknown"		/ **/
+/*#define ARCHLIB_EXP "/usr/local/lib/perl5/5.33/unknown"		/ **/
 
 /* BIN:
  *	This symbol holds the path of the bin directory where the package will
@@ -1283,8 +1283,8 @@
  *	This symbol contains the ~name expanded version of PRIVLIB, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-#define PRIVLIB "/usr/local/lib/perl5/5.32"		/**/
-#define PRIVLIB_EXP "/usr/local/lib/perl5/5.32"		/**/
+#define PRIVLIB "/usr/local/lib/perl5/5.33"		/**/
+#define PRIVLIB_EXP "/usr/local/lib/perl5/5.33"		/**/
 
 /* SITEARCH:
  *	This symbol contains the name of the private library for this package.
@@ -1301,8 +1301,8 @@
  *	This symbol contains the ~name expanded version of SITEARCH, to be used
  *	in programs that are not prepared to deal with ~ expansion at run-time.
  */
-/*#define SITEARCH "/usr/local/lib/perl5/5.32/unknown"		/ **/
-/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.32/unknown"		/ **/
+/*#define SITEARCH "/usr/local/lib/perl5/5.33/unknown"		/ **/
+/*#define SITEARCH_EXP "/usr/local/lib/perl5/5.33/unknown"		/ **/
 
 /* SITELIB:
  *	This symbol contains the name of the private library for this package.
@@ -1324,8 +1324,8 @@
  *	removed.  The elements in inc_version_list (inc_version_list.U) can
  *	be tacked onto this variable to generate a list of directories to search.
  */
-#define SITELIB "/usr/local/lib/perl5/5.32"		/**/
-#define SITELIB_EXP "/usr/local/lib/perl5/5.32"		/**/
+#define SITELIB "/usr/local/lib/perl5/5.33"		/**/
+#define SITELIB_EXP "/usr/local/lib/perl5/5.33"		/**/
 #define SITELIB_STEM "/usr/local/lib/perl5"		/**/
 
 /* PERL_VENDORARCH:
@@ -5261,5 +5261,5 @@
 
 /* Generated from:
  * 14796a77fb4ae3335f5e589a98445bc6e838b688194f6f112537495f0814f5d5 config_h.SH
- * 6e8898de349ca5bd5102aa12be91e6884110157cb9267e661f6fc797bbd54649 uconfig.sh
+ * 36943454dd4cff2f1fd6a87074c461192a18b540d34c4d348707cc8cf7b8fcfc uconfig.sh
  * ex: set ro: */
diff --git a/uconfig.sh b/uconfig.sh
index 1d4a0f4a57..b1ed39ee1c 100644
--- a/uconfig.sh
+++ b/uconfig.sh
@@ -6,8 +6,8 @@ afs='false'
 afsroot='/afs'
 alignbytes='4'
 aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.32/unknown'
-archlibexp='/usr/local/lib/perl5/5.32/unknown'
+archlib='/usr/local/lib/perl5/5.33/unknown'
+archlibexp='/usr/local/lib/perl5/5.33/unknown'
 archname='unknown'
 asctime_r_proto='0'
 bin='/usr/local/bin'
@@ -781,8 +781,8 @@ package='perl5'
 perl_static_inline='static'
 phostname='hostname'
 pidtype=int
-privlib='/usr/local/lib/perl5/5.32'
-privlibexp='/usr/local/lib/perl5/5.32'
+privlib='/usr/local/lib/perl5/5.33'
+privlibexp='/usr/local/lib/perl5/5.33'
 procselfexe=''
 prototype='undef'
 ptrsize='4'
@@ -832,11 +832,11 @@ sig_name_init='0'
 sig_num_init='0'
 sig_size='1'
 signal_t=int
-sitearch='/usr/local/lib/perl5/5.32/unknown'
-sitearchexp='/usr/local/lib/perl5/5.32/unknown'
-sitelib='/usr/local/lib/perl5/5.32'
+sitearch='/usr/local/lib/perl5/5.33/unknown'
+sitearchexp='/usr/local/lib/perl5/5.33/unknown'
+sitelib='/usr/local/lib/perl5/5.33'
 sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.32'
+sitelibexp='/usr/local/lib/perl5/5.33'
 sizesize=4
 sizetype='size_t'
 socksizetype='int'
diff --git a/uconfig64.sh b/uconfig64.sh
index c6479b8010..112689fa02 100644
--- a/uconfig64.sh
+++ b/uconfig64.sh
@@ -6,8 +6,8 @@ afs='false'
 afsroot='/afs'
 alignbytes='8'
 aphostname='/bin/hostname'
-archlib='/usr/local/lib/perl5/5.32/unknown'
-archlibexp='/usr/local/lib/perl5/5.32/unknown'
+archlib='/usr/local/lib/perl5/5.33/unknown'
+archlibexp='/usr/local/lib/perl5/5.33/unknown'
 archname='unknown64'
 asctime_r_proto='0'
 bin='/usr/local/bin'
@@ -781,8 +781,8 @@ package='perl5'
 perl_static_inline='static'
 phostname='hostname'
 pidtype=int
-privlib='/usr/local/lib/perl5/5.32'
-privlibexp='/usr/local/lib/perl5/5.32'
+privlib='/usr/local/lib/perl5/5.33'
+privlibexp='/usr/local/lib/perl5/5.33'
 procselfexe=''
 prototype='undef'
 ptrsize='8'
@@ -832,11 +832,11 @@ sig_name_init='0'
 sig_num_init='0'
 sig_size='1'
 signal_t=int
-sitearch='/usr/local/lib/perl5/5.32/unknown'
-sitearchexp='/usr/local/lib/perl5/5.32/unknown'
-sitelib='/usr/local/lib/perl5/5.32'
+sitearch='/usr/local/lib/perl5/5.33/unknown'
+sitearchexp='/usr/local/lib/perl5/5.33/unknown'
+sitelib='/usr/local/lib/perl5/5.33'
 sitelib_stem='/usr/local/lib/perl5'
-sitelibexp='/usr/local/lib/perl5/5.32'
+sitelibexp='/usr/local/lib/perl5/5.33'
 sizesize=4
 sizetype='size_t'
 socksizetype='int'
diff --git a/win32/GNUmakefile b/win32/GNUmakefile
index 0aac005e85..ad7687008d 100644
--- a/win32/GNUmakefile
+++ b/win32/GNUmakefile
@@ -7,7 +7,7 @@
 #	Windows SDK 64-bit compiler and tools
 #
 # This is set up to build a perl.exe that runs off a shared library
-# (perl532.dll).  Also makes individual DLLs for the XS extensions.
+# (perl533.dll).  Also makes individual DLLs for the XS extensions.
 #
 # The easiest way to customize the build process is to use parameters like this:
 #
@@ -64,7 +64,7 @@ INST_TOP := $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	:= \5.32.0
+#INST_VER	:= \5.33.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -230,7 +230,7 @@ DEFAULT_INC_EXCLUDES_DOT := define
 # set this to additionally provide a statically linked perl-static.exe.
 # Note that dynamic loading will not work with this perl, so you must
 # include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl532s.lib will also be created.
+# variables below. A static library perl533s.lib will also be created.
 # Ordinary perl.exe is not affected by this option.
 #
 #BUILD_STATIC	:= define
@@ -1004,9 +1004,9 @@ ifeq ($(CCTYPE),GCC)
 
 CFGSH_TMPL	= config.gc
 CFGH_TMPL	= config_H.gc
-PERLIMPLIB	= $(COREDIR)\libperl532$(a)
-PERLIMPLIBBASE	= libperl532$(a)
-PERLSTATICLIB	= ..\libperl532s$(a)
+PERLIMPLIB	= $(COREDIR)\libperl533$(a)
+PERLIMPLIBBASE	= libperl533$(a)
+PERLSTATICLIB	= ..\libperl533s$(a)
 INT64		= long long
 
 else
@@ -1019,12 +1019,12 @@ endif
 
 # makedef.pl must be updated if this changes, and this should normally
 # only change when there is an incompatible revision of the public API.
-PERLIMPLIB	?= $(COREDIR)\perl532$(a)
-PERLIMPLIBBASE	?= perl532$(a)
-PERLEXPLIB	?= $(COREDIR)\perl532.exp
-PERLSTATICLIB	?= ..\perl532s$(a)
-PERLDLL		= ..\perl532.dll
-PERLDLLBASE	= perl532.dll
+PERLIMPLIB	?= $(COREDIR)\perl533$(a)
+PERLIMPLIBBASE	?= perl533$(a)
+PERLEXPLIB	?= $(COREDIR)\perl533.exp
+PERLSTATICLIB	?= ..\perl533s$(a)
+PERLDLL		= ..\perl533.dll
+PERLDLLBASE	= perl533.dll
 
 # don't let "gmake -n all" try to run "miniperl.exe make_ext.pl"
 PLMAKE		= gmake
diff --git a/win32/Makefile b/win32/Makefile
index 2ddcf3a81a..2ebb8f7760 100644
--- a/win32/Makefile
+++ b/win32/Makefile
@@ -5,7 +5,7 @@
 #	Windows SDK 64-bit compiler and tools
 #
 # This is set up to build a perl.exe that runs off a shared library
-# (perl532.dll).  Also makes individual DLLs for the XS extensions.
+# (perl533.dll).  Also makes individual DLLs for the XS extensions.
 #
 
 ##
@@ -38,7 +38,7 @@ INST_TOP	= $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	= \5.32.0
+#INST_VER	= \5.33.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -191,7 +191,7 @@ DEFAULT_INC_EXCLUDES_DOT = define
 # set this to additionally provide a statically linked perl-static.exe.
 # Note that dynamic loading will not work with this perl, so you must
 # include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl532s.lib will also be created.
+# variables below. A static library perl533s.lib will also be created.
 # Ordinary perl.exe is not affected by this option.
 #
 #BUILD_STATIC	= define
@@ -665,9 +665,9 @@ $(o).dll:
 
 # makedef.pl must be updated if this changes, and this should normally
 # only change when there is an incompatible revision of the public API.
-PERLIMPLIB	= ..\perl532.lib
-PERLSTATICLIB	= ..\perl532s.lib
-PERLDLL		= ..\perl532.dll
+PERLIMPLIB	= ..\perl533.lib
+PERLSTATICLIB	= ..\perl533s.lib
+PERLDLL		= ..\perl533.dll
 
 MINIPERL	= ..\miniperl.exe
 MINIDIR		= .\mini
diff --git a/win32/makefile.mk b/win32/makefile.mk
index 7ea7b53328..8426c3817b 100644
--- a/win32/makefile.mk
+++ b/win32/makefile.mk
@@ -7,7 +7,7 @@
 #	Windows SDK 64-bit compiler and tools
 #
 # This is set up to build a perl.exe that runs off a shared library
-# (perl532.dll).  Also makes individual DLLs for the XS extensions.
+# (perl533.dll).  Also makes individual DLLs for the XS extensions.
 #
 
 ##
@@ -45,7 +45,7 @@ INST_TOP	*= $(INST_DRV)\perl
 # versioned installation can be obtained by setting INST_TOP above to a
 # path that includes an arbitrary version string.
 #
-#INST_VER	*= \5.32.0
+#INST_VER	*= \5.33.0
 
 #
 # Comment this out if you DON'T want your perl installation to have
@@ -220,7 +220,7 @@ DEFAULT_INC_EXCLUDES_DOT *= define
 # set this to additionally provide a statically linked perl-static.exe.
 # Note that dynamic loading will not work with this perl, so you must
 # include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl532s.lib will also be created.
+# variables below. A static library perl533s.lib will also be created.
 # Ordinary perl.exe is not affected by this option.
 #
 #BUILD_STATIC	*= define
@@ -950,8 +950,8 @@ UTILS		=			\
 
 CFGSH_TMPL	= config.gc
 CFGH_TMPL	= config_H.gc
-PERLIMPLIB	= $(COREDIR)\libperl532$(a)
-PERLSTATICLIB	= ..\libperl532s$(a)
+PERLIMPLIB	= $(COREDIR)\libperl533$(a)
+PERLSTATICLIB	= ..\libperl533s$(a)
 INT64		= long long
 
 .ELSE
@@ -964,11 +964,11 @@ INT64		= __int64
 
 # makedef.pl must be updated if this changes, and this should normally
 # only change when there is an incompatible revision of the public API.
-PERLIMPLIB	*= $(COREDIR)\perl532$(a)
-PERLEXPLIB	*= $(COREDIR)\perl532.exp
-PERLSTATICLIB	*= ..\perl532s$(a)
-PERLDLL		= ..\perl532.dll
-PERLDLLBASE	= perl532.dll
+PERLIMPLIB	*= $(COREDIR)\perl533$(a)
+PERLEXPLIB	*= $(COREDIR)\perl533.exp
+PERLSTATICLIB	*= ..\perl533s$(a)
+PERLDLL		= ..\perl533.dll
+PERLDLLBASE	= perl533.dll
 
 #EUMM on Win32 isn't ready for parallel make, so only allow this file to be parallel
 #$(MAKE) will contain the -P that this makefile was called with, which is bad for