1 files changed, 325 insertions, 0 deletions
diff --git a/Makefile.SH b/Makefile.SH
new file mode 100644
index 0000000000..fe0549a035
--- /dev/null
+++ b/Makefile.SH
@@ -0,0 +1,325 @@
+case $CONFIG in
+'')
+	if test -f config.sh; then TOP=.;
+	elif test -f ../config.sh; then TOP=..;
+	elif test -f ../../config.sh; then TOP=../..;
+	elif test -f ../../../config.sh; then TOP=../../..;
+	elif test -f ../../../../config.sh; then TOP=../../../..;
+	else
+		echo "Can't find config.sh."; exit 1
+	fi
+	. $TOP/config.sh
+	;;
+esac
+: This forces SH files to create target in same directory as SH file.
+: This is so that make depend always knows where to find SH derivatives.
+case "$0" in
+*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
+esac
+
+case "$d_symlink" in
+*define*) sln='ln -s' ;;
+*) sln='ln';;
+esac
+
+case "$d_dosuid" in
+*define*) suidperl='suidperl' ;;
+*) suidperl='';;
+esac
+
+echo "Extracting Makefile (with variable substitutions)"
+: This section of the file will have variable substitutions done on it.
+: Move anything that needs config subs from !NO!SUBS! section to !GROK!THIS!.
+: Protect any dollar signs and backticks that you do not want interpreted
+: by putting a backslash in front.  You may delete these comments.
+$spitshell >Makefile <<!GROK!THIS!
+# : Makefile.SH,v 15738Revision: 4.1 15738Date: 92/08/07 17:18:08 $
+#
+# $Log:	Makefile.SH,v $
+# Revision 4.1  92/08/07  17:18:08  lwall
+# Stage 6 Snapshot
+# 
+# Revision 4.0.1.4  92/06/08  11:40:43  lwall
+# patch20: cray didn't give enough memory to /bin/sh
+# patch20: various and sundry fixes
+# 
+# Revision 4.0.1.3  91/11/05  15:48:11  lwall
+# patch11: saberized perl
+# patch11: added support for dbz
+# 
+# Revision 4.0.1.2  91/06/07  10:14:43  lwall
+# patch4: cflags now emits entire cc command except for the filename
+# patch4: alternate make programs are now semi-supported
+# patch4: uperl.o no longer tries to link in libraries prematurely
+# patch4: installperl now installs x2p stuff too
+# 
+# Revision 4.0.1.1  91/04/11  17:30:39  lwall
+# patch1: C flags are now settable on a per-file basis
+# 
+# Revision 4.0  91/03/20  00:58:54  lwall
+# 4.0 baseline.
+# 
+# 
+
+# I now supply perly.c with the kits, so don't remake perly.c without byacc
+BYACC = $byacc
+CC = $cc
+bin = $installbin
+scriptdir = $scriptdir
+privlib = $installprivlib
+mansrc = $mansrc
+manext = $manext
+LDFLAGS = $ldflags
+CLDFLAGS = $ldflags
+SMALL = $small
+LARGE = $large $split
+mallocsrc = $mallocsrc
+mallocobj = $mallocobj
+dlsrc = $dlsrc
+dlobj = $dlobj
+SLN = $sln
+RMS = rm -f
+
+libs = $libs $cryptlib
+
+public = perl $suidperl
+
+shellflags = $shellflags
+
+# To use an alternate make, set $altmake in config.sh.
+MAKE = ${altmake-make}
+!GROK!THIS!
+
+: In the following dollars and backticks do not need the extra backslash.
+$spitshell >>Makefile <<'!NO!SUBS!'
+
+CCCMD = `sh $(shellflags) cflags $@`
+
+private = 
+
+scripts = h2ph
+
+manpages = perl.man h2ph.man
+
+util =
+
+sh = Makefile.SH makedepend.SH h2ph.SH
+
+h1 = EXTERN.h INTERN.h av.h cop.h config.h embed.h form.h handy.h
+h2 = hv.h op.h opcode.h perl.h regcomp.h regexp.h gv.h sv.h util.h
+
+h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h 
+h2 = embed.h form.h gv.h handy.h hv.h hvdbm.h keywords.h mg.h op.h
+h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
+h4 = regexp.h scope.h sv.h unixish.h util.h
+h = $(h1) $(h2) $(h3) $(h4)
+
+c1 = av.c scope.c op.c doop.c doio.c dump.c hv.c
+c2 = $(mallocsrc) mg.c perly.c pp.c regcomp.c regexec.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c
+
+c = $(c1) $(c2) $(c3)
+
+s1 = av.c scope.c op.c doop.c doio.c dump.c hv.c
+s2 = $(mallocobj) mg.c perly.c pp.c regcomp.c regexec.c
+s3 = gv.c sv.c taint.c toke.c util.c deb.c run.c perly.c
+
+saber = $(s1) $(s2) $(s3)
+
+obj1 = av.o scope.o op.o doop.o doio.o dump.o hv.o
+obj2 = $(mallocobj) mg.o perly.o pp.o regcomp.o regexec.o
+obj3 = gv.o sv.o taint.o toke.o util.o deb.o run.o
+
+obj = $(obj1) $(obj2) $(obj3) $(dlobj)
+
+lintflags = -hbvxac
+
+addedbyconf = Makefile.old bsd eunice filexp loc pdp11 usg v7
+
+# grrr
+SHELL = /bin/sh
+
+.SUFFIXES: .x
+
+.c.o:
+	$(CCCMD) $*.c
+
+.x.c:
+	sh writemain $*.x >$*.c
+
+all: miniperl perl lib/Config.pm
+
+#all: $(public) $(private) $(util) $(scripts)
+#	cd x2p; $(MAKE) all
+#	touch all
+!NO!SUBS!
+###
+### Boilerplate for all the .xs files in the ext directory.  
+### XXX FIXME:  At some point we also need to copy .pm files out of 
+### XXX the ext directory into lib.
+#  Configure sets extensions to a string like
+# "ext/dbm/NDBM_File.xs ext/dbm/ODBM_File.xs ext/dbm/GDBM_File.xs \
+#  ext/dbm/SDBM_File.xs ext/posix/POSIX.xs"
+extobjs=" "
+for f in $extensions
+do
+    base=`basename $f .xs`
+    dir=`dirname $f`
+    extobjs="$extobjs $f.o"
+    $spitshell >>Makefile <<!GROK!THIS!
+
+# $base extension
+$base.c:	$f ext/xsubpp ext/typemap
+	test -f miniperl || make miniperl
+	ext/xsubpp $f >tmp
+	mv tmp $base.c
+
+$base.o: $base.c
+!GROK!THIS!
+
+    case $base in
+    SDBM_File) $spitshell >>Makefile <<'!NO!SUBS!'
+
+lib/auto/SDBM_File/SDBM_File.so: SDBM_File.o ext/dbm/sdbm/libsdbm.a
+	@- mkdir lib/auto/SDBM_File 2>/dev/null
+	ld -o lib/auto/SDBM_File/SDBM_File.so SDBM_File.o ext/dbm/sdbm/libsdbm.a
+
+ext/dbm/sdbm/libsdbm.a: ext/dbm/sdbm/sdbm.c ext/dbm/sdbm/sdbm.h
+	cd ext/dbm/sdbm; $(MAKE) sdbm
+!NO!SUBS!
+    ;;
+    POSIX) $spitshell >>Makefile <<'!NO!SUBS!'
+lib/auto/POSIX/POSIX.so: POSIX.o ext/dbm/sdbm/libsdbm.a
+	@- mkdir lib/auto/POSIX 2>/dev/null
+	ld -o lib/auto/POSIX/POSIX.so POSIX.o ext/dbm/sdbm/libsdbm.a
+!NO!SUBS!
+    ;;
+    esac
+done
+
+echo "extobjs=$extobjs" >> Makefile
+
+$spitshell >>Makefile <<'!NO!SUBS!'
+# The $& notation tells Sequent machines that it can do a parallel make,
+# and is harmless otherwise.
+
+miniperlmain.c: miniperlmain.x
+miniperlmain.o: miniperlmain.c
+miniperl: $& miniperlmain.o perl.o $(obj)
+	$(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain.o perl.o $(obj) $(libs)
+
+perlmain.c: perlmain.x
+perlmain.o: perlmain.c
+perl: $& perlmain.o perl.o $(obj) NDBM_File.o ODBM_File.o POSIX.o
+	$(CC) $(LARGE) $(CLDFLAGS) -o perl perlmain.o perl.o $(obj) NDBM_File.o ODBM_File.o POSIX.o $(libs)
+
+libperl.rlb: libperl.a
+	ranlib libperl.a
+	touch libperl.rlb
+
+libperl.a: $& perl.o $(obj)
+	ar rcuv libperl.a $(obj)
+
+# This version, if specified in Configure, does ONLY those scripts which need
+# set-id emulation.  Suidperl must be setuid root.  It contains the "taint"
+# checks as well as the special code to validate that the script in question
+# has been invoked correctly.
+
+suidperl: $& sperl.o main.o libperl.rlb
+	$(CC) $(LARGE) $(CLDFLAGS) sperl.o main.o libperl.a $(libs) -o suidperl
+
+lib/Config.pm: config.sh
+	./configpm
+
+saber: $(saber)
+	# load $(saber)
+	# load /lib/libm.a
+
+sperl.o: perl.c perly.h patchlevel.h $(h)
+	$(RMS) sperl.c
+	$(SLN) perl.c sperl.c
+	$(CCCMD) -DIAMSUID sperl.c
+	$(RMS) sperl.c
+
+dl.o: ext/dl/dl.c
+	cp ext/dl/dl.c dl.c
+	$(CC) -c dl.c
+
+!NO!SUBS!
+
+### Now on to the rest of the Makefile.
+$spitshell >>Makefile <<'!NO!SUBS!'
+    
+perly.h: perly.c
+	@ echo Dummy dependency for dumb parallel make
+	touch perly.h
+
+opcode.h: opcode.pl
+	- opcode.pl
+
+embed.h: embed_h.SH global.sym interp.sym
+	sh embed_h.SH
+
+perly.c:
+	@ echo 'Expect' 80 shift/reduce and 62 reduce/reduce conflicts
+	$(BYACC) -d perly.y
+	sh $(shellflags) ./perly.fixer y.tab.c perly.c
+	mv y.tab.h perly.h
+	echo 'extern YYSTYPE yylval;' >>perly.h
+
+perly.o: perly.c perly.h $(h)
+	$(CCCMD) perly.c
+
+install: all
+	./perl installperl
+
+clean:
+	rm -f *.o all perl taintperl suidperl miniperl
+	cd x2p; $(MAKE) clean
+
+realclean: clean
+	cd x2p; $(MAKE) realclean
+	rm -f *.orig */*.orig *~ */*~ core $(addedbyconf) h2ph h2ph.man
+	rm -f perly.h t/perl Makefile config.h makedepend makedir
+	rm -f makefile x2p/Makefile x2p/makefile cflags x2p/cflags
+	rm -f c2ph pstruct
+
+# The following lint has practically everything turned on.  Unfortunately,
+# you have to wade through a lot of mumbo jumbo that can't be suppressed.
+# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
+# for that spot.
+
+lint: perly.c $(c)
+	lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+
+depend: makedepend
+	- test -f perly.h || cp /dev/null perly.h
+	./makedepend
+	- test -s perly.h || /bin/rm -f perly.h
+	cd x2p; $(MAKE) depend
+
+test: perl
+	- cd t && chmod +x TEST */*.t
+	- cd t && (rm -f perl; $(SLN) ../perl perl) && ./perl TEST </dev/tty
+
+clist:
+	echo $(c) | tr ' ' '\012' >.clist
+
+hlist:
+	echo $(h) | tr ' ' '\012' >.hlist
+
+shlist:
+	echo $(sh) | tr ' ' '\012' >.shlist
+
+# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
+# If this runs make out of memory, delete /usr/include lines.
+!NO!SUBS!
+
+$eunicefix Makefile4
+case `pwd` in
+*SH)
+    $rm -f ../Makefile4
+    ln Makefile4 ../Makefile4
+    ;;
+esac
+rm -f makefile