summaryrefslogtreecommitdiff
path: root/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'Makefile')
-rw-r--r--Makefile365
1 files changed, 365 insertions, 0 deletions
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000000..c2ea48571b
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,365 @@
+# : Makefile.SH,v 15738Revision: 4.1 15738Date: 92/08/07 17:18:08 $
+#
+# $Log: Makefile.SH,v $
+# Revision 4.1 92/08/07 17:18:08 lwall
+# Stage 6 Snapshot
+#
+# Revision 4.0.1.4 92/06/08 11:40:43 lwall
+# patch20: cray didn't give enough memory to /bin/sh
+# patch20: various and sundry fixes
+#
+# Revision 4.0.1.3 91/11/05 15:48:11 lwall
+# patch11: saberized perl
+# patch11: added support for dbz
+#
+# Revision 4.0.1.2 91/06/07 10:14:43 lwall
+# patch4: cflags now emits entire cc command except for the filename
+# patch4: alternate make programs are now semi-supported
+# patch4: uperl.o no longer tries to link in libraries prematurely
+# patch4: installperl now installs x2p stuff too
+#
+# Revision 4.0.1.1 91/04/11 17:30:39 lwall
+# patch1: C flags are now settable on a per-file basis
+#
+# Revision 4.0 91/03/20 00:58:54 lwall
+# 4.0 baseline.
+#
+#
+
+CC = cc
+YACC = /bin/yacc
+bin = /usr/local/bin
+scriptdir = /usr/local/bin
+privlib = /usr/local/lib/perl
+mansrc = /usr/man/manl
+manext = l
+LDFLAGS =
+CLDFLAGS =
+SMALL =
+LARGE =
+mallocsrc = malloc.c
+mallocobj = malloc.o
+SLN = ln -s
+RMS = rm -f
+
+libs = -ldbm -lm -lposix
+
+public = perl
+
+shellflags =
+
+# To use an alternate make, set in config.sh.
+MAKE = make
+
+
+CCCMD = `sh $(shellflags) cflags $@`
+
+private =
+
+scripts = h2ph
+
+manpages = perl.man h2ph.man
+
+util =
+
+sh = Makefile.SH makedepend.SH h2ph.SH
+
+h1 = EXTERN.h INTERN.h av.h cop.h config.h embed.h form.h handy.h
+h2 = hv.h op.h opcode.h perl.h regcomp.h regexp.h gv.h sv.h util.h
+
+h = $(h1) $(h2)
+
+c1 = av.c cop.c cons.c consop.c doop.c doio.c dolist.c
+c2 = eval.c hv.c main.c $(mallocsrc) perl.c pp.c regcomp.c regexec.c
+c3 = gv.c sv.c toke.c util.c usersub.c
+
+c = $(c1) $(c2) $(c3)
+
+s1 = av.c cop.c cons.c consop.c doop.c doio.c dolist.c
+s2 = eval.c hv.c main.c perl.c pp.c regcomp.c regexec.c
+s3 = gv.c sv.c toke.c util.c usersub.c perly.c
+
+saber = $(s1) $(s2) $(s3)
+
+obj1 = av.o scope.o op.o doop.o doio.o dolist.o dump.o
+obj2 = $(mallocobj) mg.o pp.o regcomp.o regexec.o
+obj3 = gv.o sv.o toke.o util.o deb.o run.o
+
+obj = $(obj1) $(obj2) $(obj3)
+
+tobj1 = tav.o tcop.o tcons.o tconsop.o tdoop.o tdoio.o tdolist.o tdump.o
+tobj2 = teval.o thv.o $(mallocobj) tpp.o tregcomp.o tregexec.o
+tobj3 = tgv.o tsv.o ttoke.o tutil.o
+
+tobj = $(tobj1) $(tobj2) $(tobj3)
+
+lintflags = -hbvxac
+
+addedbyconf = Makefile.old bsd eunice filexp loc pdp11 usg v7
+
+# grrr
+SHELL = /bin/sh
+
+.c.o:
+ $(CCCMD) $*.c
+
+
+all: perl
+
+#all: $(public) $(private) $(util) uperl.o $(scripts)
+# cd x2p; $(MAKE) all
+# touch all
+
+# This is the standard version that contains no "taint" checks and is
+# used for all scripts that aren't set-id or running under something set-id.
+# The $& notation is tells Sequent machines that it can do a parallel make,
+# and is harmless otherwise.
+
+perl: $& main.o perly.o perl.o $(obj) hv.o usersub.o
+ $(CC) -Bstatic $(LARGE) $(CLDFLAGS) main.o perly.o perl.o $(obj) hv.o usersub.o $(libs) -o perl
+ echo ""
+
+libperl.rlb: libperl.a
+ ranlib libperl.a
+ touch libperl.rlb
+
+libperl.a: $& perly.o perl.o $(obj) hv.o usersub.o
+ ar rcuv libperl.a $(obj) hv.o perly.o usersub.o
+
+# This version, if specified in Configure, does ONLY those scripts which need
+# set-id emulation. Suidperl must be setuid root. It contains the "taint"
+# checks as well as the special code to validate that the script in question
+# has been invoked correctly.
+
+suidperl: $& sperl.o tmain.o libtperl.rlb
+ $(CC) $(LARGE) $(CLDFLAGS) sperl.o tmain.o libtperl.a $(libs) -o suidperl
+
+# This version interprets scripts that are already set-id either via a wrapper
+# or through the kernel allowing set-id scripts (bad idea). Taintperl must
+# NOT be setuid to root or anything else. The only difference between it
+# and normal perl is the presence of the "taint" checks.
+
+taintperl: $& tmain.o libtperl.rlb
+ $(CC) $(LARGE) $(CLDFLAGS) tmain.o libtperl.a $(libs) -o taintperl
+
+libtperl.rlb: libtperl.a
+ ranlib libtperl.a
+ touch libtperl.rlb
+
+libtperl.a: $& tperly.o tperl.o $(tobj) thv.o usersub.o
+ ar rcuv libtperl.a $(tobj) thv.o tperly.o usersub.o tperl.o
+
+# This command assumes that /usr/include/dbz.h and /usr/lib/dbz.o exist.
+
+dbzperl: $& main.o zhv.o libperl.rlb
+ $(CC) $(LARGE) $(CLDFLAGS) main.o zhv.o /usr/lib/dbz.o libperl.a $(libs) -o dbzperl
+
+zhv.o: hv.c $(h)
+ $(RMS) zhv.c
+ $(SLN) hv.c zhv.c
+ $(CCCMD) -DWANT_DBZ zhv.c
+ $(RMS) zhv.c
+
+uperl.o: $& $(obj) main.o hv.o perly.o
+ -ld $(LARGE) $(LDFLAGS) -r $(obj) main.o hv.o perly.o -o uperl.o
+
+saber: $(saber)
+ # load $(saber)
+ # load /lib/libm.a
+
+# Replicating all this junk is yucky, but I don't see a portable way to fix it.
+
+tperly.o: perly.c perly.h $(h)
+ $(RMS) tperly.c
+ $(SLN) perly.c tperly.c
+ $(CCCMD) -DTAINT tperly.c
+ $(RMS) tperly.c
+
+tperl.o: perl.c perly.h patchlevel.h perl.h $(h)
+ $(RMS) tperl.c
+ $(SLN) perl.c tperl.c
+ $(CCCMD) -DTAINT tperl.c
+ $(RMS) tperl.c
+
+sperl.o: perl.c perly.h patchlevel.h $(h)
+ $(RMS) sperl.c
+ $(SLN) perl.c sperl.c
+ $(CCCMD) -DTAINT -DIAMSUID sperl.c
+ $(RMS) sperl.c
+
+tav.o: av.c $(h)
+ $(RMS) tav.c
+ $(SLN) av.c tav.c
+ $(CCCMD) -DTAINT tav.c
+ $(RMS) tav.c
+
+tcop.o: cop.c $(h)
+ $(RMS) tcop.c
+ $(SLN) cop.c tcop.c
+ $(CCCMD) -DTAINT tcop.c
+ $(RMS) tcop.c
+
+tcons.o: cons.c $(h) perly.h
+ $(RMS) tcons.c
+ $(SLN) cons.c tcons.c
+ $(CCCMD) -DTAINT tcons.c
+ $(RMS) tcons.c
+
+tconsop.o: consop.c $(h)
+ $(RMS) tconsop.c
+ $(SLN) consop.c tconsop.c
+ $(CCCMD) -DTAINT tconsop.c
+ $(RMS) tconsop.c
+
+tdoop.o: doop.c $(h)
+ $(RMS) tdoop.c
+ $(SLN) doop.c tdoop.c
+ $(CCCMD) -DTAINT tdoop.c
+ $(RMS) tdoop.c
+
+tdoio.o: doio.c $(h)
+ $(RMS) tdoio.c
+ $(SLN) doio.c tdoio.c
+ $(CCCMD) -DTAINT tdoio.c
+ $(RMS) tdoio.c
+
+tdolist.o: dolist.c $(h)
+ $(RMS) tdolist.c
+ $(SLN) dolist.c tdolist.c
+ $(CCCMD) -DTAINT tdolist.c
+ $(RMS) tdolist.c
+
+tdump.o: dump.c $(h)
+ $(RMS) tdump.c
+ $(SLN) dump.c tdump.c
+ $(CCCMD) -DTAINT tdump.c
+ $(RMS) tdump.c
+
+teval.o: eval.c $(h)
+ $(RMS) teval.c
+ $(SLN) eval.c teval.c
+ $(CCCMD) -DTAINT teval.c
+ $(RMS) teval.c
+
+thv.o: hv.c $(h)
+ $(RMS) thv.c
+ $(SLN) hv.c thv.c
+ $(CCCMD) -DTAINT thv.c
+ $(RMS) thv.c
+
+tmain.o: main.c $(h)
+ $(RMS) tmain.c
+ $(SLN) main.c tmain.c
+ $(CCCMD) -DTAINT tmain.c
+ $(RMS) tmain.c
+
+tpp.o: pp.c $(h)
+ $(RMS) tpp.c
+ $(SLN) pp.c tpp.c
+ $(CCCMD) -DTAINT tpp.c
+ $(RMS) tpp.c
+
+tregcomp.o: regcomp.c $(h)
+ $(RMS) tregcomp.c
+ $(SLN) regcomp.c tregcomp.c
+ $(CCCMD) -DTAINT tregcomp.c
+ $(RMS) tregcomp.c
+
+tregexec.o: regexec.c $(h)
+ $(RMS) tregexec.c
+ $(SLN) regexec.c tregexec.c
+ $(CCCMD) -DTAINT tregexec.c
+ $(RMS) tregexec.c
+
+tgv.o: gv.c $(h)
+ $(RMS) tgv.c
+ $(SLN) gv.c tgv.c
+ $(CCCMD) -DTAINT tgv.c
+ $(RMS) tgv.c
+
+tsv.o: sv.c $(h) perly.h
+ $(RMS) tsv.c
+ $(SLN) sv.c tsv.c
+ $(CCCMD) -DTAINT tsv.c
+ $(RMS) tsv.c
+
+ttoke.o: toke.c $(h) perly.h
+ $(RMS) ttoke.c
+ $(SLN) toke.c ttoke.c
+ $(CCCMD) -DTAINT ttoke.c
+ $(RMS) ttoke.c
+
+tutil.o: util.c $(h)
+ $(RMS) tutil.c
+ $(SLN) util.c tutil.c
+ $(CCCMD) -DTAINT tutil.c
+ $(RMS) tutil.c
+
+perly.h: perly.c
+ @ echo Dummy dependency for dumb parallel make
+ touch perly.h
+
+embed.h: embed_h.SH global.var interp.var
+ sh embed_h.SH
+
+perly.c: perly.y perly.fixer
+ @ \
+case "$(YACC)" in \
+ *bison*) echo 'Expect' 25 shift/reduce and 53 reduce/reduce conflicts;; \
+ *) echo 'Expect' 27 shift/reduce and 51 reduce/reduce conflicts;; \
+esac
+ $(YACC) -d perly.y
+ sh $(shellflags) ./perly.fixer y.tab.c perly.c
+ mv y.tab.h perly.h
+ echo 'extern YYSTYPE yylval;' >>perly.h
+
+perly.o: perly.c perly.h $(h)
+ $(CCCMD) perly.c
+
+install: all
+ ./perl installperl
+
+clean:
+ rm -f *.o all perl taintperl suidperl perly.c
+ cd x2p; $(MAKE) clean
+
+realclean: clean
+ cd x2p; $(MAKE) realclean
+ rm -f *.orig */*.orig *~ */*~ core $(addedbyconf) h2ph h2ph.man
+ rm -f perly.c perly.h t/perl Makefile config.h makedepend makedir
+ rm -f makefile x2p/Makefile x2p/makefile cflags x2p/cflags
+ rm -f c2ph pstruct
+
+# The following lint has practically everything turned on. Unfortunately,
+# you have to wade through a lot of mumbo jumbo that can't be suppressed.
+# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
+# for that spot.
+
+lint: perly.c $(c)
+ lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+
+depend: makedepend
+ - test -f perly.h || cp /dev/null perly.h
+ ./makedepend
+ - test -s perly.h || /bin/rm -f perly.h
+ cd x2p; $(MAKE) depend
+
+test: perl
+ - cd t && chmod +x TEST */*.t
+ - cd t && (rm -f perl; $(SLN) ../perl perl) && ./perl TEST </dev/tty
+
+clist:
+ echo $(c) | tr ' ' '\012' >.clist
+
+hlist:
+ echo $(h) | tr ' ' '\012' >.hlist
+
+shlist:
+ echo $(sh) | tr ' ' '\012' >.shlist
+
+# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
+$(obj) hv.o:
+ @ echo "You haven't done a "'"make depend" yet!'; exit 1
+makedepend: makedepend.SH
+ /bin/sh $(shellflags) makedepend.SH
+
View Lorry Controller Status