diff options
Diffstat (limited to 'config_H')
| -rw-r--r-- | config_H | 337 |
1 files changed, 206 insertions, 131 deletions
@@ -11,12 +11,12 @@ * that running config_h.SH again will wipe out any changes you've made. * For a more permanent change edit config.sh and rerun config_h.SH. * - * $Id: Config_h.U,v 3.0.1.3 1995/01/30 14:25:39 ram Exp $ + * $Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $ */ -/* Configuration time: Tue Jul 25 15:36:03 EDT 1995 - * Configured by: andy - * Target system: crystal crystal 3.2 2 i386 +/* Configuration time: Mon Nov 20 15:21:41 EST 1995 + * Configured by: doughera + * Target system: sunos fractal 5.4 generic_101946-29 i86pc i386 */ #ifndef _config_h_ @@ -28,31 +28,16 @@ */ #define MEM_ALIGNBYTES 4 /**/ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define ARCHLIB_EXP "/usr/local/lib/perl5/i386-isc" /**/ - /* BIN: * This symbol holds the path of the bin directory where the package will * be installed. Program must be prepared to deal with ~name substitution. */ -#define BIN "/usr/local/bin" /**/ - -/* BYTEORDER: - * This symbol hold the hexadecimal constant defined in byteorder, - * i.e. 0x1234 or 0x4321, etc... - */ -#define BYTEORDER 0x1234 /* large digits for MSB */ +#define BIN "/opt/perl/bin" /**/ /* CAT2: * This macro catenates 2 tokens together. */ -/* STRINGIFY: - * This macro surrounds its token with double quotes. - */ -#if 1 == 1 +#if 42 == 1 #define CAT2(a,b)a/**/b #define CAT3(a,b,c)a/**/b/**/c #define CAT4(a,b,c,d)a/**/b/**/c/**/d @@ -60,7 +45,7 @@ #define STRINGIFY(a)"a" /* If you can get stringification with catify, tell me how! */ #endif -#if 1 == 42 +#if 42 == 42 #define CAT2(a,b)a ## b #define CAT3(a,b,c)a ## b ## c #define CAT4(a,b,c,d)a ## b ## c ## d @@ -88,7 +73,7 @@ * output. This symbol will have the value "-" if CPPSTDIN needs a minus * to specify standard input, otherwise the value is "". */ -#define CPPSTDIN "cc -E" +#define CPPSTDIN "gcc -E" #define CPPMINUS "-" /* HAS_ALARM: @@ -101,7 +86,7 @@ * This symbol indicates the C compiler can check for function attributes, * such as printf formats. This is normally only supported by GNU cc. */ -/*#define HASATTRIBUTE /**/ +#define HASATTRIBUTE /**/ #ifndef HASATTRIBUTE #define __attribute__(_arg_) #endif @@ -110,25 +95,25 @@ * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. */ -#define HAS_BCMP /**/ +/*#define HAS_BCMP /**/ /* HAS_BCOPY: * This symbol is defined if the bcopy() routine is available to * copy blocks of memory. */ -#define HAS_BCOPY /**/ +/*#define HAS_BCOPY /**/ /* HAS_BZERO: * This symbol is defined if the bzero() routine is available to * set a memory block to 0. */ -#define HAS_BZERO /**/ +/*#define HAS_BZERO /**/ /* CASTI32: * This symbol is defined if the C compiler can cast negative * or large floating point numbers to 32-bit ints. */ -/*#define CASTI32 /**/ +#define CASTI32 /**/ /* CASTNEGFLOAT: * This symbol is defined if the C compiler can cast negative @@ -142,8 +127,8 @@ * 2 = couldn't cast >= 0x80000000 * 4 = couldn't cast in argument expression list */ -/*#define CASTNEGFLOAT /**/ -#define CASTFLAGS 7 /**/ +#define CASTNEGFLOAT /**/ +#define CASTFLAGS 0 /**/ /* HAS_CHOWN: * This symbol, if defined, indicates that the chown routine is @@ -175,7 +160,7 @@ * within your programs. The mere use of the "const" keyword will * trigger the necessary tests. */ -/*#define HASCONST /**/ +#define HASCONST /**/ #ifndef HASCONST #define const #endif @@ -211,7 +196,7 @@ * available to return a string describing the last error that * occurred from a call to dlopen(), dlclose() or dlsym(). */ -/*#define HAS_DLERROR /**/ +#define HAS_DLERROR /**/ /* SETUID_SCRIPTS_ARE_SECURE_NOW: * This symbol, if defined, indicates that the bug that prevents @@ -230,7 +215,7 @@ * subprocesses to which it must pass the filename rather than the * file descriptor of the script to be executed. */ -/*#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ +#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ /*#define DOSUID /**/ /* HAS_DUP2: @@ -243,13 +228,13 @@ * This symbol, if defined, indicates that the fchmod routine is available * to change mode of opened files. If unavailable, use chmod(). */ -/*#define HAS_FCHMOD /**/ +#define HAS_FCHMOD /**/ /* HAS_FCHOWN: * This symbol, if defined, indicates that the fchown routine is available * to change ownership of opened files. If unavailable, use chown(). */ -/*#define HAS_FCHOWN /**/ +#define HAS_FCHOWN /**/ /* HAS_FCNTL: * This symbol, if defined, indicates to the C program that @@ -261,13 +246,13 @@ * This symbol, if defined, indicates that the fgetpos routine is * available to get the file position indicator, similar to ftell(). */ -/*#define HAS_FGETPOS /**/ +#define HAS_FGETPOS /**/ /* FLEXFILENAMES: * This symbol, if defined, indicates that the system supports filenames * longer than 14 characters. */ -/*#define FLEXFILENAMES /**/ +#define FLEXFILENAMES /**/ /* HAS_FLOCK: * This symbol, if defined, indicates that the flock routine is @@ -285,24 +270,7 @@ * This symbol, if defined, indicates that the fsetpos routine is * available to set the file position indicator, similar to fseek(). */ -/*#define HAS_FSETPOS /**/ - -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * Possible values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. - */ -#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) +#define HAS_FSETPOS /**/ /* HAS_GETGROUPS: * This symbol, if defined, indicates that the getgroups() routine is @@ -315,7 +283,7 @@ * This symbol, if defined, indicates that the gethostent routine is * available to lookup host names in some data base or other. */ -/*#define HAS_GETHOSTENT /**/ +#define HAS_GETHOSTENT /**/ /* HAS_UNAME: * This symbol, if defined, indicates that the C program may use the @@ -420,19 +388,19 @@ * This symbol, if defined, indicates that the mblen routine is available * to find the number of bytes in a multibye character. */ -/*#define HAS_MBLEN /**/ +#define HAS_MBLEN /**/ /* HAS_MBSTOWCS: * This symbol, if defined, indicates that the mbstowcs routine is * available to covert a multibyte string into a wide character string. */ -/*#define HAS_MBSTOWCS /**/ +#define HAS_MBSTOWCS /**/ /* HAS_MBTOWC: * This symbol, if defined, indicates that the mbtowc routine is available * to covert a multibyte to a wide character. */ -/*#define HAS_MBTOWC /**/ +#define HAS_MBTOWC /**/ /* HAS_MEMCMP: * This symbol, if defined, indicates that the memcmp routine is available @@ -452,7 +420,7 @@ * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your * own version. */ -/*#define HAS_MEMMOVE /**/ +#define HAS_MEMMOVE /**/ /* HAS_MEMSET: * This symbol, if defined, indicates that the memset routine is available @@ -524,6 +492,12 @@ */ #define HAS_PIPE /**/ +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. + */ +#define HAS_POLL /**/ + /* HAS_READDIR: * This symbol, if defined, indicates that the readdir routine is * available to read directory entries. You may have to include @@ -575,7 +549,7 @@ * probably use memmove() or memcpy(). If neither is defined, roll your * own version. */ -#define HAS_SAFE_BCOPY /**/ +/*#define HAS_SAFE_BCOPY /**/ /* HAS_SAFE_MEMCPY: * This symbol, if defined, indicates that the memcpy routine is available @@ -663,7 +637,7 @@ * available to change the real, effective and saved gid of the current * process. */ -#define HAS_SETREGID /**/ +/*#define HAS_SETREGID /**/ /*#define HAS_SETRESGID /**/ /* HAS_SETREUID: @@ -676,7 +650,7 @@ * available to change the real, effective and saved uid of the current * process. */ -#define HAS_SETREUID /**/ +/*#define HAS_SETREUID /**/ /*#define HAS_SETRESUID /**/ /* HAS_SETRGID: @@ -714,8 +688,8 @@ * but not always right so it should be emitted by the program only * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ -#define Shmat_t char * /**/ -/*#define HAS_SHMAT_PROTOTYPE /**/ +#define Shmat_t void * /**/ +#define HAS_SHMAT_PROTOTYPE /**/ /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is @@ -726,13 +700,13 @@ * supported. */ #define HAS_SOCKET /**/ -/*#define HAS_SOCKETPAIR /**/ +#define HAS_SOCKETPAIR /**/ /* USE_STAT_BLOCKS: * This symbol is defined if this system has a stat structure declaring * st_blksize and st_blocks. */ -/*#define USE_STAT_BLOCKS /**/ +#define USE_STAT_BLOCKS /**/ /* USE_STDIO_PTR: * This symbol is defined if the _ptr and _cnt fields (or similar) @@ -898,7 +872,7 @@ * This symbol, if defined, indicates that the truncate routine is * available to truncate files. */ -/*#define HAS_TRUNCATE /**/ +#define HAS_TRUNCATE /**/ /* HAS_TZNAME: * This symbol, if defined, indicates that the tzname[] array is @@ -929,7 +903,7 @@ * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. */ -/*#define HASVOLATILE /**/ +#define HASVOLATILE /**/ #ifndef HASVOLATILE #define volatile #endif @@ -963,13 +937,13 @@ * This symbol, if defined, indicates that the wcstombs routine is * available to convert wide character strings to multibyte strings. */ -/*#define HAS_WCSTOMBS /**/ +#define HAS_WCSTOMBS /**/ /* HAS_WCTOMB: * This symbol, if defined, indicates that the wctomb routine is available * to covert a wide character to a multibyte. */ -/*#define HAS_WCTOMB /**/ +#define HAS_WCTOMB /**/ /* Fpos_t: * This symbol holds the type used to declare file positions in libc. @@ -1036,7 +1010,7 @@ * This symbol, if defined, indicates that <dlfcn.h> exists and should * be included. */ -/*#define I_DLFCN /**/ +#define I_DLFCN /**/ /* I_FCNTL: * This manifest constant tells the C program to include <fcntl.h>. @@ -1085,7 +1059,7 @@ * This symbol, if defined, indicates that <net/errno.h> exists and * should be included. */ -#define I_NET_ERRNO /**/ +/*#define I_NET_ERRNO /**/ /* I_NETINET_IN: * This symbol, if defined, indicates to the C program that it should @@ -1151,7 +1125,7 @@ * This symbol, if defined, indicates to the C program that it should * include <sys/dir.h>. */ -#define I_SYS_DIR /**/ +/*#define I_SYS_DIR /**/ /* I_SYS_FILE: * This symbol, if defined, indicates to the C program that it should @@ -1181,7 +1155,7 @@ * This symbol, if defined, indicates to the C program that it should * include <sys/select.h> in order to get definition of struct timeval. */ -/*#define I_SYS_SELECT /**/ +#define I_SYS_SELECT /**/ /* I_SYS_TIMES: * This symbol, if defined, indicates to the C program that it should @@ -1251,8 +1225,8 @@ * This symbol, if defined, indicates to the C program that it should * include <varargs.h>. */ -/*#define I_STDARG /**/ -#define I_VARARGS /**/ +#define I_STDARG /**/ +/*#define I_VARARGS /**/ /* I_VFORK: * This symbol, if defined, indicates to the C program that it should @@ -1260,12 +1234,6 @@ */ /*#define I_VFORK /**/ -/* INTSIZE: - * This symbol contains the size of an int, so that the C preprocessor - * can make decisions based on it. - */ -#define INTSIZE 4 /**/ - /* Off_t: * This symbol holds the type used to declare offsets in the kernel. * It can be int, long, off_t, etc... It may be necessary to include @@ -1281,11 +1249,32 @@ */ #define Mode_t mode_t /* file mode parameter for system calls */ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. - */ -#define PRIVLIB_EXP "/usr/local/lib/perl5" /**/ +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK /* CAN_PROTOTYPE: * If defined, this macro indicates that the C compiler can handle @@ -1298,7 +1287,7 @@ * * int main _((int argc, char *argv[])); */ -/*#define CAN_PROTOTYPE /**/ +#define CAN_PROTOTYPE /**/ #ifdef CAN_PROTOTYPE #define _(args) args #else @@ -1317,7 +1306,7 @@ * is often a directory that is mounted across diverse architectures. * Programs must be prepared to deal with ~name expansion. */ -#define SCRIPTDIR "/usr/local/bin" /**/ +#define SCRIPTDIR "/opt/perl/bin" /**/ /* Select_fd_set_t: * This symbol holds the type used for the 2nd, 3rd, and 4th @@ -1327,16 +1316,6 @@ */ #define Select_fd_set_t fd_set * /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - */ -#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CLD","PWR","WINCH","21","POLL","CONT","STOP","TSTP","TTIN","TTOU" /**/ - /* Size_t: * This symbol holds the type used to declare length parameters * for string functions. It is usually size_t, but may be @@ -1353,7 +1332,7 @@ * to get any typedef'ed information. * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). */ -#define SSize_t int /* signed count of bytes */ +#define SSize_t ssize_t /* signed count of bytes */ /* STDCHAR: * This symbol is defined to be the type of char used in stdio.h. @@ -1368,31 +1347,6 @@ */ #define Uid_t uid_t /* UID type */ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED 15 -#endif -#define VOIDFLAGS 15 -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - /* VMS: * This symbol, if defined, indicates that the program is running under * VMS. It is currently only set in conjunction with the EUNICE symbol. @@ -1404,6 +1358,18 @@ */ #define LOC_SED "/bin/sed" /**/ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define ARCHLIB_EXP "/opt/perl/lib/i86pc-solaris/5.002" /**/ + +/* BYTEORDER: + * This symbol hold the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + */ +#define BYTEORDER 0x1234 /* large digits for MSB */ + /* CSH: * This symbol, if defined, indicates that the C-shell exists. * If defined, contains the full pathname of csh. @@ -1418,11 +1384,45 @@ */ /*#define DLSYM_NEEDS_UNDERSCORE /* */ +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. + */ +#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b)) + /* USE_DYNAMIC_LOADING: * This symbol, if defined, indicates that dynamic loading of * some sort is available. */ -/*#define USE_DYNAMIC_LOADING /**/ +#define USE_DYNAMIC_LOADING /**/ + +/* I_DBM: + * This symbol, if defined, indicates that <dbm.h> exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and + * should be included. + */ +/*#define I_DBM /**/ +#define I_RPCSVC_DBM /**/ + +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include <locale.h>. + */ +#define I_LOCALE /**/ /* I_SYS_STAT: * This symbol, if defined, indicates to the C program that it should @@ -1430,6 +1430,12 @@ */ #define I_SYS_STAT /**/ +/* INTSIZE: + * This symbol contains the size of an int, so that the C preprocessor + * can make decisions based on it. + */ +#define INTSIZE 4 /**/ + /* Free_t: * This variable contains the return type of free(). It is usually * void, but occasionally int. @@ -1437,7 +1443,7 @@ /* Malloc_t: * This symbol is the type of pointer returned by malloc and realloc. */ -#define Malloc_t char * /**/ +#define Malloc_t void * /**/ #define Free_t void /**/ /* MYMALLOC: @@ -1445,10 +1451,79 @@ */ #define MYMALLOC /**/ -/* SITELIB_EXP: - * This symbol contains the ~name expanded version of SITELIB, to be used +/* OLDARCHLIB_EXP: + * This symbol contains the ~name expanded version of OLDARCHLIB, to be + * used in programs that are not prepared to deal with ~ expansion at + * run-time. + */ +/*#define OLDARCHLIB_EXP "" /**/ + +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ -/*#define SITELIB_EXP "" /**/ +#define PRIVLIB_EXP "/opt/perl/lib" /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","ABRT","EMT","FPE","KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM","USR1","USR2","CHLD","PWR","WINCH","URG","IO","STOP","TSTP","CONT","TTIN","TTOU","VTALRM","PROF","XCPU","XFSZ","WAITING","LWP","FREEZE","THAW","RTMIN","NUM37","NUM38","NUM39","NUM40","NUM41","NUM42","RTMAX","IOT","CLD","POLL",0 /**/ +#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,6,18,22,0 /**/ + +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITEARCH_EXP "/opt/perl/lib/site_perl/i86pc-solaris" /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif #endif |