diff options
Diffstat (limited to 'config_h.SH')
| -rwxr-xr-x | config_h.SH | 191 |
1 files changed, 127 insertions, 64 deletions
diff --git a/config_h.SH b/config_h.SH index 02b6030d9e..f76b0446ed 100755 --- a/config_h.SH +++ b/config_h.SH @@ -54,12 +54,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define BIN "$bin" /**/ -/* BYTEORDER: - * This symbol hold the hexadecimal constant defined in byteorder, - * i.e. 0x1234 or 0x4321, etc... - */ -#define BYTEORDER 0x$byteorder /* large digits for MSB */ - /* CAT2: * This macro catenates 2 tokens together. */ @@ -301,23 +295,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_fsetpos HAS_FSETPOS /**/ -/* Gconvert: - * This preprocessor macro is defined to convert a floating point - * number to a string without a trailing decimal point. This - * emulates the behavior of sprintf("%g"), but is sometimes much more - * efficient. If gconvert() is not available, but gcvt() drops the - * trailing decimal point, then gcvt() is used. If all else fails, - * a macro using sprintf("%g") is used. Arguments for the Gconvert - * macro are: value, number of digits, whether trailing zeros should - * be retained, and the output buffer. - * Possible values are: - * d_Gconvert='gconvert((x),(n),(t),(b))' - * d_Gconvert='gcvt((x),(n),(b))' - * d_Gconvert='sprintf((b),"%.*g",(n),(x))' - * The last two assume trailing zeros should not be kept. - */ -#define Gconvert(x,n,t,b) $d_Gconvert - /* HAS_GETGROUPS: * This symbol, if defined, indicates that the getgroups() routine is * available to get the list of process groups. If unavailable, multiple @@ -538,6 +515,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_pipe HAS_PIPE /**/ +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. + */ +#$d_poll HAS_POLL /**/ + /* HAS_READDIR: * This symbol, if defined, indicates that the readdir routine is * available to read directory entries. You may have to include @@ -1274,12 +1257,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_vfork I_VFORK /**/ -/* INTSIZE: - * This symbol contains the size of an int, so that the C preprocessor - * can make decisions based on it. - */ -#define INTSIZE $intsize /**/ - /* Off_t: * This symbol holds the type used to declare offsets in the kernel. * It can be int, long, off_t, etc... It may be necessary to include @@ -1295,6 +1272,33 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define Mode_t $modetype /* file mode parameter for system calls */ +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK $o_nonblock +#define VAL_EAGAIN $eagain +#define RD_NODATA $rd_nodata +#$d_eofnblk EOF_NONBLOCK + /* PRIVLIB_EXP: * This symbol contains the ~name expanded version of PRIVLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. @@ -1341,16 +1345,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define Select_fd_set_t $selecttype /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - */ -#define SIG_NAME "`echo $sig_name | sed 's/ /","/g'`" /**/ - /* Size_t: * This symbol holds the type used to declare length parameters * for string functions. It is usually size_t, but may be @@ -1382,31 +1376,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define Uid_t $uidtype /* UID type */ -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif - /* VMS: * This symbol, if defined, indicates that the program is running under * VMS. It is currently only set in conjunction with the EUNICE symbol. @@ -1418,6 +1387,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define LOC_SED "$full_sed" /**/ +/* BYTEORDER: + * This symbol hold the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + */ +#define BYTEORDER 0x$byteorder /* large digits for MSB */ + /* CSH: * This symbol, if defined, indicates that the C-shell exists. * If defined, contains the full pathname of csh. @@ -1432,18 +1407,52 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_dlsymun DLSYM_NEEDS_UNDERSCORE /* */ +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. + */ +#define Gconvert(x,n,t,b) $d_Gconvert + /* USE_DYNAMIC_LOADING: * This symbol, if defined, indicates that dynamic loading of * some sort is available. */ #$usedl USE_DYNAMIC_LOADING /**/ +/* I_DBM: + * This symbol, if defined, indicates that <dbm.h> exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and + * should be included. + */ +#$i_dbm I_DBM /**/ +#$i_rpcsvcdbm I_RPCSVC_DBM /**/ + /* I_SYS_STAT: * This symbol, if defined, indicates to the C program that it should * include <sys/stat.h>. */ #$i_sysstat I_SYS_STAT /**/ +/* INTSIZE: + * This symbol contains the size of an int, so that the C preprocessor + * can make decisions based on it. + */ +#define INTSIZE $intsize /**/ + /* Free_t: * This variable contains the return type of free(). It is usually * void, but occasionally int. @@ -1459,11 +1468,65 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_mymalloc MYMALLOC /**/ +/* SIG_NAME: + * This symbol contains a list of signal names in order. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". Duplicates are allowed. + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + * See SIG_NUM and SIG_MAX. + */ +#define SIG_NAME "`echo $sig_name | sed 's/ /","/g'`",0 /**/ + +/* SIG_NUM: + * This symbol contains a list of signal number, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. Duplicates are allowed, so you can't assume + * sig_num[i] == i. Instead, the signal number corresponding to + * sig_name[i] is sig_number[i]. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NUM `echo $sig_num 0 | sed 's/ /,/g'` /**/ + /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ #$d_sitelib SITELIB_EXP "$sitelibexp" /**/ +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + #endif !GROK!THIS! |