diff options
Diffstat (limited to 'config_h.SH')
| -rwxr-xr-x | config_h.SH | 1067 |
1 files changed, 662 insertions, 405 deletions
diff --git a/config_h.SH b/config_h.SH index 65b8f9f4cd..19304be0fb 100755 --- a/config_h.SH +++ b/config_h.SH @@ -25,7 +25,7 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * that running config.h.SH again will wipe out any changes you've made. * For a more permanent change edit config.sh and rerun config.h.SH. * - * \$Id: Config_h.U,v 3.0.1.2 1993/08/24 12:13:20 ram Exp $ + * Config_h.U */ /* Configuration time: $cf_time @@ -36,6 +36,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #ifndef _config_h_ #define _config_h_ +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double. Usual values are 2, 4 and 8. + */ +#define MEM_ALIGNBYTES $alignbytes /**/ + /* BIN: * This symbol holds the path of the bin directory where the package will * be installed. Program must be prepared to deal with ~name substitution. @@ -63,6 +69,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #define CPPSTDIN "$cppstdin" #define CPPMINUS "$cppminus" +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +#$d_alarm HAS_ALARM /**/ + /* HAS_BCMP: * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. @@ -81,6 +93,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_bzero HAS_BZERO /**/ +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +#$d_casti32 CASTI32 /**/ + /* CASTNEGFLOAT: * This symbol is defined if the C compiler can cast negative * numbers to unsigned longs, ints and shorts. @@ -103,6 +121,18 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_charsprf CHARSPRINTF /**/ +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +#$d_chown HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +#$d_chroot HAS_CHROOT /**/ + /* HAS_CHSIZE: * This symbol, if defined, indicates that the chsize routine is available * to truncate files. You might need a -lx to get this routine. @@ -132,20 +162,25 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_csh CSH "$csh" /**/ -/* DOSUID: - * This symbol, if defined, indicates that the C program should - * check the script that it is executing for setuid/setgid bits, and - * attempt to emulate setuid/setgid on systems that have disabled - * setuid #! scripts because the kernel can't do it securely. - * It is up to the package designer to make sure that this emulation - * is done securely. Among other things, it should do an fstat on - * the script it just opened to make sure it really is a setuid/setgid - * script, it should make sure the arguments passed correspond exactly - * to the argument on the #! line, and it should not trust any - * subprocesses to which it must pass the filename rather than the - * file descriptor of the script to be executed. +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. */ -#$d_dosuid DOSUID /**/ +#$d_cuserid HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +#$d_dbl_dig HAS_DBL_DIG /* */ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#$d_difftime HAS_DIFFTIME /**/ /* HAS_DUP2: * This symbol, if defined, indicates that the dup2 routine is @@ -171,6 +206,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_fcntl HAS_FCNTL /**/ +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#$d_fgetpos HAS_FGETPOS /**/ + /* FLEXFILENAMES: * This symbol, if defined, indicates that the system supports filenames * longer than 14 characters. @@ -183,6 +224,18 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_flock HAS_FLOCK /**/ +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +#$d_fork HAS_FORK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#$d_fsetpos HAS_FSETPOS /**/ + /* HAS_GETGROUPS: * This symbol, if defined, indicates that the getgroups() routine is * available to get the list of process groups. If unavailable, multiple @@ -203,6 +256,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_uname HAS_UNAME /**/ +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available to get the login name. + */ +#$d_getlogin HAS_GETLOGIN /**/ + /* HAS_GETPGRP: * This symbol, if defined, indicates that the getpgrp routine is * available to get the current process group. @@ -215,12 +274,49 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_getpgrp2 HAS_GETPGRP2 /**/ +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available to get the parent process ID. + */ +#$d_getppid HAS_GETPPID /**/ + /* HAS_GETPRIORITY: * This symbol, if defined, indicates that the getpriority routine is * available to get a process's priority. */ #$d_getprior HAS_GETPRIORITY /**/ +/* HAS_GROUP: + * This symbol, if defined, indicates that the group routine is + * available. + */ +#$d_group HAS_GROUP /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#$d_htonl HAS_HTONL /**/ +#$d_htonl HAS_HTONS /**/ +#$d_htonl HAS_NTOHL /**/ +#$d_htonl HAS_NTOHS /**/ + /* HAS_KILLPG: * This symbol, if defined, indicates that the killpg routine is available * to kill process groups. If unavailable, you probably should use kill @@ -234,12 +330,36 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_link HAS_LINK /**/ +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +#$d_lockf HAS_LOCKF /**/ + /* HAS_LSTAT: * This symbol, if defined, indicates that the lstat routine is * available to do file stats on symbolic links. */ #$d_lstat HAS_LSTAT /**/ +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +#$d_mblen HAS_MBLEN /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +#$d_mbstowcs HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +#$d_mbtowc HAS_MBTOWC /**/ + /* HAS_MEMCMP: * This symbol, if defined, indicates that the memcmp routine is available * to compare blocks of memory. @@ -273,41 +393,78 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_mkdir HAS_MKDIR /**/ +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#$d_mktime HAS_MKTIME /**/ + /* HAS_MSG: * This symbol, if defined, indicates that the entire msg*(2) library is * supported (IPC mechanism based on message queues). */ #$d_msg HAS_MSG /**/ -/* HAS_MSGCTL: - * This symbol, if defined, indicates that the msgctl() routine is - * available to perform message control operations. +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. */ -#$d_msgctl HAS_MSGCTL /**/ +#$d_nice HAS_NICE /**/ -/* HAS_MSGGET: - * This symbol, if defined, indicates that the msgget() routine is - * available to get a new message queue. +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. */ -#$d_msgget HAS_MSGGET /**/ +#$d_open3 HAS_OPEN3 /**/ -/* HAS_MSGRCV: - * This symbol, if defined, indicates that the msgrcv() routine is - * available to extract a message from the message queue. +/* HAS_PASSWD: + * This symbol, if defined, indicates that the passwd routine is + * available. */ -#$d_msgrcv HAS_MSGRCV /**/ +#$d_passwd HAS_PASSWD /**/ -/* HAS_MSGSND: - * This symbol, if defined, indicates that the msgsnd() routine is - * available to send a message into the message queue. +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available to suspend a process until a signal is received. */ -#$d_msgsnd HAS_MSGSND /**/ +#$d_pause HAS_PAUSE /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available to create an inter-process channel. */ -#$d_open3 HAS_OPEN3 /**/ +#$d_pipe HAS_PIPE /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * <dirent.h>. See I_DIRENT. + */ +#$d_readdir HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#$d_seekdir HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#$d_telldir HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#$d_rewinddir HAS_REWINDDIR /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available to read the value of a symbolic link. + */ +#$d_readlink HAS_READLINK /**/ /* HAS_RENAME: * This symbol, if defined, indicates that the rename routine is available @@ -336,24 +493,6 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_sem HAS_SEM /**/ -/* HAS_SEMCTL: - * This symbol, if defined, indicates that the semctl() routine is - * available to perform semaphore control operations. - */ -#$d_semctl HAS_SEMCTL /**/ - -/* HAS_SEMGET: - * This symbol, if defined, indicates that the semget() routine is - * available to get a set of semaphores. - */ -#$d_semget HAS_SEMGET /**/ - -/* HAS_SEMOP: - * This symbol, if defined, indicates that the semop() routine is - * available to execute semaphore operations. - */ -#$d_semop HAS_SEMOP /**/ - /* HAS_SETEGID: * This symbol, if defined, indicates that the setegid routine is available * to change the effective gid of the current program. @@ -366,18 +505,25 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_seteuid HAS_SETEUID /**/ +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +#$d_setlinebuf HAS_SETLINEBUF /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +#$d_setlocale HAS_SETLOCALE /**/ + /* HAS_SETPGID: * This symbol, if defined, indicates that the setpgid routine is * available to set process group ID. */ #$d_setpgid HAS_SETPGID /**/ -/* HAS_SETPGRP: - * This symbol, if defined, indicates that the setpgrp routine is - * available to set the current process group. - */ -#$d_setpgrp HAS_SETPGRP /**/ - /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) * routine is available to set the current process group. @@ -440,23 +586,19 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_shm HAS_SHM /**/ -/* HAS_SHMCTL: - * This symbol, if defined, indicates that the shmctl() routine is - * available to perform shared memory control operations. +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. */ -#$d_shmctl HAS_SHMCTL /**/ - -/* HAS_SHMDT: - * This symbol, if defined, indicates that the shmdt() routine is - * available to detach a shared memory segment from the process space. - */ -#$d_shmdt HAS_SHMDT /**/ - -/* HAS_SHMGET: - * This symbol, if defined, indicates that the shmget() routine is - * available to request a shared memory segment from the kernel. +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ -#$d_shmget HAS_SHMGET /**/ +#define Shmat_t $shmattype /**/ +#$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is @@ -466,14 +608,8 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * This symbol, if defined, indicates that the BSD socketpair() call is * supported. */ -/* USE_OLDSOCKET: - * This symbol, if defined, indicates that the 4.1c BSD socket interface - * is supported instead of the 4.2/4.3 BSD socket interface. For instance, - * there is no setsockopt() call. - */ #$d_socket HAS_SOCKET /**/ #$d_sockpair HAS_SOCKETPAIR /**/ -#$d_oldsock USE_OLDSOCKET /**/ /* USE_STAT_BLOCKS: * This symbol is defined if this system has a stat structure declaring @@ -487,6 +623,24 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_stdstdio USE_STD_STDIO /**/ +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#$d_strchr HAS_STRCHR /**/ +#$d_index HAS_INDEX /**/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#$d_strcoll HAS_STRCOLL /**/ + /* USE_STRUCT_COPY: * This symbol, if defined, indicates that this C compiler knows how * to copy structures. If undefined, you'll need to use a block copy @@ -494,6 +648,31 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_strctcpy USE_STRUCT_COPY /**/ +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#$d_strerror HAS_STRERROR /**/ +#$d_syserrlst HAS_SYS_ERRLIST /**/ +#define Strerror(e) $d_strerrm + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to transform strings. + */ +#$d_strxfrm HAS_STRXFRM /**/ + /* HAS_SYMLINK: * This symbol, if defined, indicates that the symlink routine is available * to create symbolic links. @@ -512,12 +691,17 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_system HAS_SYSTEM /**/ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case <sys/types.h> should be - * included). +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. */ -#define Time_t $timetype /* Time type */ +#$d_tcgetpgrp HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +#$d_tcsetpgrp HAS_TCSETPGRP /**/ /* HAS_TIMES: * This symbol, if defined, indicates that the times() routine exists. @@ -532,11 +716,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_truncate HAS_TRUNCATE /**/ -/* I_NDIR: - * This symbol, if defined, indicates that the program should include the - * system's version of ndir.h, rather than the one with this package. +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. */ -#$i_ndir I_NDIR /**/ +#$d_tzname HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to set and get the value of the file creation mask. + */ +#$d_umask HAS_UMASK /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +#$d_vfork HAS_VFORK /**/ /* VOIDSIG: * This symbol is defined if this system declares "void (*signal(...))()" in @@ -580,11 +775,33 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_waitpid HAS_WAITPID /**/ -/* I_DBM: - * This symbol, if defined, indicates to the C program that it should - * include <dbm.h>. +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. */ -#$i_dbm I_DBM /**/ +#$d_wcstombs HAS_WCSTOMBS /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +#$d_wctomb HAS_WCTOMB /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Fpos_t $fpostype /* File position type */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include <sys/types.h> to get + * any typedef'ed information. + */ +#define Gid_t $gidtype /* Type for getgid(), etc... */ /* I_DIRENT: * This symbol, if defined, indicates to the C program that it should @@ -597,24 +814,32 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * of directory entry names is provided by a d_namlen field. Otherwise * you need to do strlen() on the d_name field. */ +/* Direntry_t: + * This symbol is set to 'struct direct' or 'struct dirent' depending on + * whether dirent is available or not. You should use this pseudo type to + * portably declare your directory entries. + */ #$i_dirent I_DIRENT /**/ #$d_dirnamlen DIRNAMLEN /**/ -#ifdef I_DIRENT -#define Direntry_t struct dirent -#else -#define Direntry_t struct direct -#endif +#define Direntry_t $direntrytype + +/* I_DLFCN: + * This symbol, if defined, indicates that <dlfcn.h> exists and should + * be included. + */ +#$i_dlfcn I_DLFCN /**/ /* I_FCNTL: * This manifest constant tells the C program to include <fcntl.h>. */ #$i_fcntl I_FCNTL /**/ -/* I_GDBM: - * This symbol, if defined, indicates that gdbm.h exists and should - * be included. +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include <float.h> to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. */ -#$i_gdbm I_GDBM /**/ +#$i_float I_FLOAT /**/ /* I_GRP: * This symbol, if defined, indicates to the C program that it should @@ -622,6 +847,25 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_grp I_GRP /**/ +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include <limits.h> to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#$i_limits I_LIMITS /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include <math.h>. + */ +#$i_math I_MATH /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include <memory.h>. + */ +#$i_memory I_MEMORY /**/ + /* I_NDBM: * This symbol, if defined, indicates that ndbm.h exists and should * be included. @@ -632,18 +876,43 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * This symbol, if defined, indicates to the C program that it should * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. */ -/* I_SYS_IN: - * This symbol, if defined, indicates to the C program that it should - * include <sys/in.h> instead of <netinet/in.h>. - */ #$i_niin I_NETINET_IN /**/ -#$i_sysin I_SYS_IN /**/ -/* I_STDARG: - * This symbol, if defined, indicates that <stdarg.h> exists and should - * be included. +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include <pwd.h>. */ -#$i_stdarg I_STDARG /**/ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +#$i_pwd I_PWD /**/ +#$d_pwquota PWQUOTA /**/ +#$d_pwage PWAGE /**/ +#$d_pwchange PWCHANGE /**/ +#$d_pwclass PWCLASS /**/ +#$d_pwexpire PWEXPIRE /**/ +#$d_pwcomment PWCOMMENT /**/ /* I_STDDEF: * This symbol, if defined, indicates that <stddef.h> exists and should @@ -651,6 +920,12 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_stddef I_STDDEF /**/ +/* I_STDLIB: + * This symbol, if defined, indicates that <stdlib.h> exists and should + * be included. + */ +#$i_stdlib I_STDLIB /**/ + /* I_STRING: * This symbol, if defined, indicates to the C program that it should * include <string.h> (USG systems) instead of <strings.h> (BSD systems). @@ -681,12 +956,44 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_sysndir I_SYS_NDIR /**/ +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include <sys/param.h>. + */ +#$i_sysparam I_SYS_PARAM /**/ + /* I_SYS_SELECT: * This symbol, if defined, indicates to the C program that it should * include <sys/select.h> in order to get definition of struct timeval. */ #$i_sysselct I_SYS_SELECT /**/ +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/times.h>. + */ +#$i_systimes I_SYS_TIMES /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * <termio.h> rather than <sgtty.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * <sgtty.h> rather than <termio.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +#$i_termio I_TERMIO /**/ +#$i_termios I_TERMIOS /**/ +#$i_sgtty I_SGTTY /**/ + /* I_TIME: * This symbol, if defined, indicates to the C program that it should * include <time.h>. @@ -715,11 +1022,22 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_utime I_UTIME /**/ +/* I_STDARG: + * This symbol, if defined, indicates that <stdarg.h> exists and should + * be included. + */ /* I_VARARGS: * This symbol, if defined, indicates to the C program that it should * include <varargs.h>. */ -#$i_varargs I_VARARGS /**/ +#$i_stdarg I_STDARG /**/ +#$i_varargs I_VARARGS /**/ + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +#$i_vfork I_VFORK /**/ /* INTSIZE: * This symbol contains the size of an int, so that the C preprocessor @@ -742,11 +1060,23 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define PRIVLIB "$privlib" /**/ -/* PTRSIZE: - * This symbol contains the size of a pointer, so that the C preprocessor - * can make decisions based on it. +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. */ -#define PTRSIZE $ptrsize /**/ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#$prototype CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args +#else +#define _(args) () +#endif /* RANDBITS: * This symbol contains the number of bits of random number the rand() @@ -762,6 +1092,32 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define SCRIPTDIR "$scriptdir" /**/ +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t $selecttype /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + */ +#define SIG_NAME "`echo $sig_name | sed 's/ /","/g'`" /**/ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Size_t $sizetype /* length paramater for string functions */ + /* STDCHAR: * This symbol is defined to be the type of char used in stdio.h. * It has the values "unsigned char" or "char". @@ -775,6 +1131,31 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define Uid_t $uidtype /* UID type */ +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + /* EUNICE: * This symbol, if defined, indicates that the program is being compiled * under the EUNICE package under VMS. The program will need to handle @@ -789,73 +1170,158 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #$d_eunice EUNICE /**/ #$d_eunice VMS /**/ -/* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. */ -#define MEM_ALIGNBYTES $memalignbytes /**/ +#define LOC_SED "$sed" /**/ -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +#$d_archlib ARCHLIB "$archlib" /**/ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if $cpp_stuff == 1 +#define CAT2(a,b)a/**/b +#define CAT3(a,b,c)a/**/b/**/c +#define CAT4(a,b,c,d)a/**/b/**/c/**/d +#define CAT5(a,b,c,d,e)a/**/b/**/c/**/d/**/e +#define STRINGIFY(a)"a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if $cpp_stuff == 42 +#define CAT2(a,b)a ## b +#define CAT3(a,b,c)a ## b ## c +#define CAT4(a,b,c,d)a ## b ## c ## d +#define CAT5(a,b,c,d,e)a ## b ## c ## d ## e +#define StGiFy(a)# a +#define STRINGIFY(a)StGiFy(a) +#define SCAT2(a,b)StGiFy(a) StGiFy(b) +#define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c) +#define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) +#define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e) +#endif +#ifndef CAT2 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* GNUC_ATTRIBUTE_CHECK: + * This symbol indicates the C compiler can check for function attributes, + * such as printf formats. */ -#$d_casti32 CASTI32 /**/ +#$d_attrib GNUC_ATTRIBUTE_CHECK /* */ -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. +#$d_void_closedir VOID_CLOSEDIR /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available. */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. +#$d_dlerror HAS_DLERROR /**/ + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. +#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /* */ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. */ -#$d_htonl HAS_HTONL /**/ -#$d_htonl HAS_HTONS /**/ -#$d_htonl HAS_NTOHL /**/ -#$d_htonl HAS_NTOHS /**/ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +#$d_suidsafe SETUID_SCRIPTS_ARE_SECURE_NOW /**/ + +#$d_dosuid DOSUID /**/ + +/* HAS_DREM: + * This symbol, if defined, indicates that the drem routine is + * available. This is a Pyramid routine that is the same as + * fmod. + */ +#$d_drem HAS_DREM /**/ + +/* HAS_FMOD: + * This symbol, if defined, indicates that the fmod routine is + * available. + */ +#$d_fmod HAS_FMOD /**/ + +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. + */ +#define Gconvert(x,n,t,b) $d_Gconvert /* HAS_ISASCII: - * This manifest constant lets the C program know that the - * isascii is available. + * This manifest constant lets the C program know that isascii + * is available. */ #$d_isascii HAS_ISASCII /**/ -/* HAS_READDIR: - * This symbol, if defined, indicates that the readdir routine is - * available to read directory entries. You may have to include - * <dirent.h>. See I_DIRENT. +/* USE_LINUX_STDIO: + * This symbol is defined if this system has a FILE structure declaring + * _IO_read_base, _IO_read_ptr, and _IO_read_end in stdio.h. */ -#$d_readdir HAS_READDIR /**/ +#$d_linuxstd USE_LINUX_STDIO /**/ -/* HAS_SEEKDIR: - * This symbol, if defined, indicates that the seekdir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. */ -#$d_seekdir HAS_SEEKDIR /**/ +#$d_locconv HAS_LOCALECONV /**/ -/* HAS_TELLDIR: - * This symbol, if defined, indicates that the telldir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available. */ -#$d_telldir HAS_TELLDIR /**/ +#$d_mkfifo HAS_MKFIFO /**/ -/* HAS_REWINDDIR: - * This symbol, if defined, indicates that the rewinddir routine is - * available. You may have to include <dirent.h>. See I_DIRENT. +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. */ -#$d_rewinddir HAS_REWINDDIR /**/ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +#$d_pathconf HAS_PATHCONF /**/ +#$d_fpathconf HAS_FPATHCONF /**/ /* HAS_SAFE_BCOPY: * This symbol, if defined, indicates that the bcopy routine is available @@ -873,51 +1339,30 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_safemcpy HAS_SAFE_MEMCPY /**/ -/* HAS_SETLOCALE: - * This symbol, if defined, indicates that the setlocale routine is - * available to handle locale-specific ctype implementations. - */ -#$d_setlocale HAS_SETLOCALE /**/ - -/* HAS_SHMAT: - * This symbol, if defined, indicates that the shmat() routine is - * available to attach a shared memory segment to the process space. +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. */ -#$d_shmat HAS_SHMAT /**/ - -/* VOIDSHMAT: - * This symbol, if defined, indicates that the shmat() routine - * returns a pointer of type void*. Otherwise, char* is assumed. +/* USE_BSDPGRP: + * This symbol, if defined, indicates that the BSD notion of process + * group is to be used. For instance, you have to say setpgrp(pid, pgrp) + * instead of the USG setpgrp(). */ -#$d_voidshmat VOIDSHMAT /**/ +#$d_setpgrp HAS_SETPGRP /**/ +#$d_bsdpgrp USE_BSDPGRP /**/ -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. - */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. - */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. */ -#$d_strerror HAS_STRERROR /**/ -#$d_syserrlst HAS_SYS_ERRLIST /**/ -#ifdef HAS_STRERROR -# define Strerror strerror -#else -#$d_strerrm Strerror(e) ((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e]) /**/ -#endif +#$d_sysconf HAS_SYSCONF /**/ -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case <sys/types.h> should be + * included). */ -#$d_vfork HAS_VFORK /**/ +#define Time_t $timetype /* Time type */ /* USE_DYNAMIC_LOADING: * This symbol, if defined, indicates that dynamic loading of @@ -925,16 +1370,7 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$usedl USE_DYNAMIC_LOADING /**/ -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * <sys/types.h> to get any typedef'ed information. - */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ - -/* GROUPSTYPE: +/* Groups_t: * This symbol holds the type used for the second argument to * getgroups(). Usually, this is the same of gidtype, but * sometimes it isn't. It can be int, ushort, uid_t, etc... @@ -943,94 +1379,15 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * getgroups(). */ #ifdef HAS_GETGROUPS -#define GROUPSTYPE $groupstype /* Type for 2nd arg to getgroups() */ +#define Groups_t $groupstype /* Type for 2nd arg to getgroups() */ #endif -/* I_DLFCN: - * This symbol, if defined, indicates that <dlfcn.h> exists and should - * be included. - */ -#$i_dlfcn I_DLFCN /**/ - -/* I_MEMORY: - * This symbol, if defined, indicates to the C program that it should - * include <memory.h>. - */ -#$i_memory I_MEMORY /**/ - /* I_NET_ERRNO: * This symbol, if defined, indicates that <net/errno.h> exists and * should be included. */ #$i_neterrno I_NET_ERRNO /**/ -/* I_PWD: - * This symbol, if defined, indicates to the C program that it should - * include <pwd.h>. - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. - */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. - */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. - */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. - */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. - */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. - */ -#$i_pwd I_PWD /**/ -#$d_pwquota PWQUOTA /**/ -#$d_pwage PWAGE /**/ -#$d_pwchange PWCHANGE /**/ -#$d_pwclass PWCLASS /**/ -#$d_pwexpire PWEXPIRE /**/ -#$d_pwcomment PWCOMMENT /**/ - -/* I_TERMIO: - * This symbol, if defined, indicates that the program should include - * <termio.h> rather than <sgtty.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -/* I_TERMIOS: - * This symbol, if defined, indicates that the program should include - * the POSIX termios.h rather than sgtty.h or termio.h. - * There are also differences in the ioctl() calls that depend on the - * value of this symbol. - */ -/* I_SGTTY: - * This symbol, if defined, indicates that the program should include - * <sgtty.h> rather than <termio.h>. There are also differences in - * the ioctl() calls that depend on the value of this symbol. - */ -#$i_termio I_TERMIO /**/ -#$i_termios I_TERMIOS /**/ -#$i_sgtty I_SGTTY /**/ - -/* I_VFORK: - * This symbol, if defined, indicates to the C program that it should - * include vfork.h. - */ -#$i_vfork I_VFORK /**/ - -/* LOC_SED: - * This symbol holds the complete pathname to the sed program. - */ -#define LOC_SED "$sed" /**/ - /* Malloc_t: * This symbol is the type of pointer returned by malloc and realloc. */ @@ -1041,123 +1398,23 @@ sed <<!GROK!THIS! >config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_mymalloc MYMALLOC /**/ -/* CAN_PROTOTYPE: - * If defined, this macro indicates that the C compiler can handle - * function prototypes. +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include <sys/types.h> + * to get any typedef'ed information. */ -#$prototype CAN_PROTOTYPE /**/ -#ifdef CAN_PROTOTYPE -#else -#endif +#define Mode_t $modetype /* file mode parameter for system calls*/ -/* SIG_NAME: - * This symbol contains a list of signal names in order. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include <sys/types.h> or <unistd.h> + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). */ -#define SIG_NAME "`echo $sig_name | sed 's/ /","/g'`" /**/ - -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. - */ -#ifndef VOIDUSED -# define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -# define void int /* is void to be avoided? */ -# define M_VOID /* Xenix strikes again */ -# define VOID -#else -# define VOID void -#endif - -/* - * The following symbols are obsolete. They are mapped to the the new - * symbols only to ease the transition process. The sources should be - * updated so as to use the new symbols only, as the support for these - * obsolete symbols may end without notice. - */ - -#ifdef MEM_ALIGNBYTES -#define ALIGNBYTES MEM_ALIGNBYTES -#endif - -#ifdef USE_CHAR_VSPRINTF -#define CHARVSPRINTF USE_CHAR_VSPRINTF -#endif - -#ifdef Gid_t -#define GIDTYPE Gid_t -#endif - -#ifdef I_GDBM -#define HAS_GDBM I_GDBM -#endif - -#ifdef I_NDBM -#define HAS_NDBM I_NDBM -#endif - -#ifdef I_DBM -#define HAS_ODBM I_DBM -#endif - -#ifdef I_SYS_IOCTL -#define I_SYSIOCTL I_SYS_IOCTL -#endif - -#ifdef Malloc_t -#define MALLOCPTRTYPE Malloc_t -#endif - -#ifdef USE_OLDSOCKET -#define OLDSOCKET USE_OLDSOCKET -#endif - -#ifdef HAS_SAFE_BCOPY -#define SAFE_BCOPY HAS_SAFE_BCOPY -#endif - -#ifdef HAS_SAFE_MEMCPY -#define SAFE_MEMCPY HAS_SAFE_MEMCPY -#endif - -#ifdef USE_STAT_BLOCKS -#define STATBLOCKS USE_STAT_BLOCKS -#endif - -#ifdef USE_STD_STDIO -#define STDSTDIO USE_STD_STDIO -#endif - -#ifdef USE_STRUCT_COPY -#define STRUCTCOPY USE_STRUCT_COPY -#endif - -#ifdef HAS_SYSTEM -#define SYSTEM HAS_SYSTEM -#endif - -#ifdef Uid_t -#define UIDTYPE Uid_t -#endif +#define SSize_t $ssizetype /* signed count of bytes */ #endif !GROK!THIS! |