diff options
Diffstat (limited to 'perlio.c')
-rw-r--r-- | perlio.c | 295 |
1 files changed, 182 insertions, 113 deletions
@@ -1,13 +1,13 @@ /* - * perlio.c Copyright (c) 1996-2001, Nick Ing-Simmons You may distribute + * perlio.c Copyright (c) 1996-2001, Nick Ing-Simmons You may distribute * under the terms of either the GNU General Public License or the - * Artistic License, as specified in the README file. + * Artistic License, as specified in the README file. */ /* - * If we have ActivePerl-like PERL_IMPLICIT_SYS then we need a dTHX to get + * If we have ActivePerl-like PERL_IMPLICIT_SYS then we need a dTHX to get * at the dispatch tables, even when we do not need it for other reasons. - * Invent a dSYS macro to abstract this out + * Invent a dSYS macro to abstract this out */ #ifdef PERL_IMPLICIT_SYS #define dSYS dTHX @@ -25,7 +25,7 @@ #define PERLIO_NOT_STDIO 0 #if !defined(PERLIO_IS_STDIO) && !defined(USE_SFIO) /* - * #define PerlIO FILE + * #define PerlIO FILE */ #endif /* @@ -49,7 +49,7 @@ int perlsio_binmode(FILE *fp, int iotype, int mode) { /* - * This used to be contents of do_binmode in doio.c + * This used to be contents of do_binmode in doio.c */ #ifdef DOSISH # if defined(atarist) || defined(__MINT__) @@ -70,11 +70,11 @@ perlsio_binmode(FILE *fp, int iotype, int mode) #endif # if defined(WIN32) && defined(__BORLANDC__) /* - * The translation mode of the stream is maintained independent of + * The translation mode of the stream is maintained independent of * the translation mode of the fd in the Borland RTL (heavy - * digging through their runtime sources reveal). User has to set + * digging through their runtime sources reveal). User has to set * the mode explicitly for the stream (though they don't document - * this anywhere). GSAR 97-5-24 + * this anywhere). GSAR 97-5-24 */ fseek(fp, 0L, 0); if (mode & O_BINARY) @@ -108,7 +108,7 @@ PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names) } Perl_croak(aTHX_ "Cannot apply \"%s\" in non-PerlIO perl", names); /* - * NOTREACHED + * NOTREACHED */ return -1; } @@ -129,7 +129,7 @@ PerlIO_binmode(pTHX_ PerlIO *fp, int iotype, int mode, const char *names) } /* - * De-mux PerlIO_openn() into fdopen, freopen and fopen type entries + * De-mux PerlIO_openn() into fdopen, freopen and fopen type entries */ PerlIO * @@ -190,9 +190,9 @@ PerlIO_init(void) { /* * Does nothing (yet) except force this file to be included in perl - * binary. That allows this file to force inclusion of other functions + * binary. That allows this file to force inclusion of other functions * that may be required by loadable extensions e.g. for - * FileHandle::tmpfile + * FileHandle::tmpfile */ } @@ -212,7 +212,7 @@ PerlIO_tmpfile(void) /* * This section is just to make sure these functions get pulled in from - * libsfio.a + * libsfio.a */ #undef PerlIO_tmpfile @@ -228,13 +228,13 @@ PerlIO_init(void) /* * Force this file to be included in perl binary. Which allows this * file to force inclusion of other functions that may be required by - * loadable extensions e.g. for FileHandle::tmpfile + * loadable extensions e.g. for FileHandle::tmpfile */ /* - * Hack sfio does its own 'autoflush' on stdout in common cases. Flush + * Hack sfio does its own 'autoflush' on stdout in common cases. Flush * results in a lot of lseek()s to regular files and lot of small - * writes to pipes. + * writes to pipes. */ sfset(sfstdout, SF_SHARE, 0); } @@ -264,14 +264,14 @@ PerlIO_findFILE(PerlIO *pio) #else /* USE_SFIO */ /*======================================================================================*/ /* - * Implement all the PerlIO interface ourselves. + * Implement all the PerlIO interface ourselves. */ #include "perliol.h" /* * We _MUST_ have <unistd.h> if we are using lseek() and may have large - * files + * files */ #ifdef I_UNISTD #include <unistd.h> @@ -320,11 +320,11 @@ PerlIO_debug(const char *fmt, ...) /*--------------------------------------------------------------------------------------*/ /* - * Inner level routines + * Inner level routines */ /* - * Table of pointers to the PerlIO structs (malloc'ed) + * Table of pointers to the PerlIO structs (malloc'ed) */ PerlIO *_perlio = NULL; #define PERLIO_TABLE_SIZE 64 @@ -335,7 +335,7 @@ PerlIO * PerlIO_allocate(pTHX) { /* - * Find a free slot in the table, allocating new table as necessary + * Find a free slot in the table, allocating new table as necessary */ PerlIO **last; PerlIO *f; @@ -478,7 +478,7 @@ PerlIO_pop(pTHX_ PerlIO *f) /* * If popped returns non-zero do not free its layer structure * it has either done so itself, or it is shared and still in - * use + * use */ if ((*l->tab->Popped) (f) != 0) return; @@ -490,7 +490,7 @@ PerlIO_pop(pTHX_ PerlIO *f) /*--------------------------------------------------------------------------------------*/ /* - * XS Interface for perl code + * XS Interface for perl code */ PerlIO_funcs * @@ -512,7 +512,7 @@ PerlIO_find_layer(pTHX_ const char *name, STRLEN len, int load) SV *layer = newSVpvn(name, len); ENTER; /* - * The two SVs are magically freed by load_module + * The two SVs are magically freed by load_module */ Perl_load_module(aTHX_ 0, pkgsv, Nullsv, layer, Nullsv); LEAVE; @@ -653,7 +653,7 @@ PerlIO_parse_layers(pTHX_ PerlIO_list_t *av, const char *names) /* * Message is consistent with how attribute lists are * passed. Even though this means "foo : : bar" is - * seen as an invalid separator character. + * seen as an invalid separator character. */ char q = ((*s == '\'') ? '"' : '\''); Perl_warn(aTHX_ @@ -681,13 +681,13 @@ PerlIO_parse_layers(pTHX_ PerlIO_list_t *av, const char *names) /* * It's a nul terminated string, not allowed * to \ the terminating null. Anything other - * character is passed over. + * character is passed over. */ if (*e++) { break; } /* - * Drop through + * Drop through */ case '\0': e--; @@ -697,7 +697,7 @@ PerlIO_parse_layers(pTHX_ PerlIO_list_t *av, const char *names) return -1; default: /* - * boring. + * boring. */ break; } @@ -870,12 +870,12 @@ IV PerlIORaw_pushed(PerlIO *f, const char *mode, SV *arg) { /* - * Remove the dummy layer + * Remove the dummy layer */ dTHX; PerlIO_pop(aTHX_ f); /* - * Pop back to bottom layer + * Pop back to bottom layer */ if (f && *f) { PerlIO_flush(f); @@ -885,7 +885,7 @@ PerlIORaw_pushed(PerlIO *f, const char *mode, SV *arg) } else { /* - * Nothing bellow - push unix on top then remove it + * Nothing bellow - push unix on top then remove it */ if (PerlIO_push(aTHX_ f, PerlIO_default_btm(), mode, arg)) { PerlIO_pop(aTHX_ PerlIONext(f)); @@ -936,7 +936,7 @@ PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names) /*--------------------------------------------------------------------------------------*/ /* - * Given the abstraction above the public API functions + * Given the abstraction above the public API functions */ int @@ -1024,7 +1024,7 @@ PerlIO_context_layers(pTHX_ const char *mode) { const char *type = NULL; /* - * Need to supply default layer info from open.pm + * Need to supply default layer info from open.pm */ if (PL_curcop) { SV *layers = PL_curcop->cop_io; @@ -1033,7 +1033,7 @@ PerlIO_context_layers(pTHX_ const char *mode) type = SvPV(layers, len); if (type && mode[0] != 'r') { /* - * Skip to write part + * Skip to write part */ const char *s = strchr(type, 0); if (s && (s - type) < len) { @@ -1049,13 +1049,13 @@ static PerlIO_funcs * PerlIO_layer_from_ref(pTHX_ SV *sv) { /* - * For any scalar type load the handler which is bundled with perl + * For any scalar type load the handler which is bundled with perl */ if (SvTYPE(sv) < SVt_PVAV) return PerlIO_find_layer(aTHX_ "Scalar", 6, 1); /* - * For other types allow if layer is known but don't try and load it + * For other types allow if layer is known but don't try and load it */ switch (SvTYPE(sv)) { case SVt_PVAV: @@ -1081,8 +1081,8 @@ PerlIO_resolve_layers(pTHX_ const char *layers, if (narg) { SV *arg = *args; /* - * If it is a reference but not an object see if we have a handler - * for it + * If it is a reference but not an object see if we have a handler + * for it */ if (SvROK(arg) && !sv_isobject(arg)) { PerlIO_funcs *handler = PerlIO_layer_from_ref(aTHX_ SvRV(arg)); @@ -1092,9 +1092,9 @@ PerlIO_resolve_layers(pTHX_ const char *layers, incdef = 0; } /* - * Don't fail if handler cannot be found :Via(...) etc. may do + * Don't fail if handler cannot be found :Via(...) etc. may do * something sensible else we will just stringfy and open - * resulting string. + * resulting string. */ } } @@ -1141,8 +1141,8 @@ PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, PerlIO_funcs *tab = NULL; if (f && *f) { /* - * This is "reopen" - it is not tested as perl does not use it - * yet + * This is "reopen" - it is not tested as perl does not use it + * yet */ PerlIOl *l = *f; layera = PerlIO_list_alloc(); @@ -1158,7 +1158,7 @@ PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, layera = PerlIO_resolve_layers(aTHX_ layers, mode, narg, args); } /* - * Start at "top" of layer stack + * Start at "top" of layer stack */ n = layera->cur - 1; while (n >= 0) { @@ -1171,7 +1171,7 @@ PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, } if (tab) { /* - * Found that layer 'n' can do opens - call it + * Found that layer 'n' can do opens - call it */ PerlIO_debug("openn(%s,'%s','%s',%d,%x,%o,%p,%d,%p)\n", tab->name, layers, mode, fd, imode, perm, f, narg, @@ -1182,7 +1182,7 @@ PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, if (n + 1 < layera->cur) { /* * More layers above the one that we used to open - - * apply them now + * apply them now */ if (PerlIO_apply_layera(aTHX_ f, mode, layera, n + 1) != 0) { @@ -1311,7 +1311,7 @@ PerlIO_flush(PerlIO *f) * errorneous input? Maybe some magical value (PerlIO* * PERLIO_FLUSH_ALL = (PerlIO*)-1;)? Yes, stdio does similar * things on fflush(NULL), but should we be bound by their design - * decisions? --jhi + * decisions? --jhi */ PerlIO **table = &_perlio; int code = 0; @@ -1517,7 +1517,7 @@ PerlIO_set_ptrcnt(PerlIO *f, STDCHAR * ptr, int cnt) /*--------------------------------------------------------------------------------------*/ /* - * utf8 and raw dummy layers + * utf8 and raw dummy layers */ IV @@ -1632,7 +1632,7 @@ PerlIO_funcs PerlIO_raw = { /*--------------------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------------------*/ /* - * "Methods" of the "base class" + * "Methods" of the "base class" */ IV @@ -1744,7 +1744,7 @@ PerlIOBase_unread(PerlIO *f, const void *vbuf, Size_t count) { dTHX; /* - * Save the position as current head considers it + * Save the position as current head considers it */ Off_t old = PerlIO_tell(f); SSize_t done; @@ -1848,7 +1848,7 @@ PerlIOBase_setlinebuf(PerlIO *f) /*--------------------------------------------------------------------------------------*/ /* - * Bottom-most level for UNIX-like case + * Bottom-most level for UNIX-like case */ typedef struct { @@ -1903,7 +1903,7 @@ PerlIOUnix_oflags(const char *mode) mode++; } /* - * Always open in binary mode + * Always open in binary mode */ oflags |= O_BINARY; if (*mode || oflags == -1) { @@ -1927,9 +1927,9 @@ PerlIOUnix_pushed(PerlIO *f, const char *mode, SV *arg) PerlIOUnix *s = PerlIOSelf(f, PerlIOUnix); s->fd = PerlIO_fileno(PerlIONext(f)); /* - * XXX could (or should) we retrieve the oflags from the open file + * XXX could (or should) we retrieve the oflags from the open file * handle rather than believing the "mode" we are passed in? XXX - * Should the value on NULL mode be 0 or -1? + * Should the value on NULL mode be 0 or -1? */ s->oflags = mode ? PerlIOUnix_oflags(mode) : -1; } @@ -1977,13 +1977,55 @@ PerlIOUnix_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, else { if (f) { /* - * FIXME: pop layers ??? + * FIXME: pop layers ??? */ } return NULL; } } +PerlIO * +PerlIOBase_dup(pTHX_ PerlIO *f, PerlIO *o, clone_params *param) +{ + PerlIO_funcs *self = PerlIOBase(o)->tab; + SV *arg = Nullsv; + char buf[8]; + if (self->Getarg) { + arg = (*self->Getarg)(o); +#ifdef sv_dup + if (arg) { + arg = sv_dup(arg, param); + } +#endif + } + if (!f) { + f = PerlIO_allocate(aTHX); + } + f = PerlIO_push(aTHX_ f, self, PerlIO_modestr(o,buf), arg); + return f; +} + +PerlIO * +PerlIOUnix_dup(pTHX_ PerlIO *f, PerlIO *o, clone_params *param) +{ + PerlIOUnix *os = PerlIOSelf(o, PerlIOUnix); + int fd = PerlLIO_dup(os->fd); + if (fd >= 0) { + f = PerlIOBase_dup(aTHX_ f, o, param); + if (f) { + /* If all went well overwrite fd in dup'ed lay with the dup()'ed fd */ + PerlIOUnix *s = PerlIOSelf(f, PerlIOUnix); + s->fd = fd; + return f; + } + else { + PerlLIO_close(fd); + } + } + return NULL; +} + + SSize_t PerlIOUnix_read(PerlIO *f, void *vbuf, Size_t count) { @@ -2037,6 +2079,7 @@ PerlIOUnix_tell(PerlIO *f) return PerlLIO_lseek(PerlIOSelf(f, PerlIOUnix)->fd, 0, SEEK_CUR); } + IV PerlIOUnix_close(PerlIO *f) { @@ -2065,6 +2108,7 @@ PerlIO_funcs PerlIO_unix = { PerlIOUnix_open, NULL, PerlIOUnix_fileno, + PerlIOUnix_dup, PerlIOUnix_read, PerlIOBase_unread, PerlIOUnix_write, @@ -2086,7 +2130,7 @@ PerlIO_funcs PerlIO_unix = { /*--------------------------------------------------------------------------------------*/ /* - * stdio as a layer + * stdio as a layer */ typedef struct { @@ -2116,7 +2160,7 @@ PerlIOStdio_mode(const char *mode, char *tmode) } /* - * This isn't used yet ... + * This isn't used yet ... */ IV PerlIOStdio_pushed(PerlIO *f, const char *mode, SV *arg) @@ -2237,7 +2281,7 @@ PerlIOStdio_read(PerlIO *f, void *vbuf, Size_t count) STDCHAR *buf = (STDCHAR *) vbuf; /* * Perl is expecting PerlIO_getc() to fill the buffer Linux's - * stdio does not do that for fread() + * stdio does not do that for fread() */ int ch = PerlSIO_fgetc(s); if (ch != EOF) { @@ -2325,12 +2369,12 @@ PerlIOStdio_flush(PerlIO *f) #if 0 /* * FIXME: This discards ungetc() and pre-read stuff which is not - * right if this is just a "sync" from a layer above Suspect right + * right if this is just a "sync" from a layer above Suspect right * design is to do _this_ but not have layer above flush this - * layer read-to-read + * layer read-to-read */ /* - * Not writeable - sync by attempting a seek + * Not writeable - sync by attempting a seek */ int err = errno; if (PerlSIO_fseek(stdio, (Off_t) 0, SEEK_CUR) != 0) @@ -2347,7 +2391,7 @@ PerlIOStdio_fill(PerlIO *f) FILE *stdio = PerlIOSelf(f, PerlIOStdio)->stdio; int c; /* - * fflush()ing read-only streams can cause trouble on some stdio-s + * fflush()ing read-only streams can cause trouble on some stdio-s */ if ((PerlIOBase(f)->flags & PERLIO_F_CANWRITE)) { if (PerlSIO_fflush(stdio) != 0) @@ -2442,7 +2486,7 @@ PerlIOStdio_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) #endif #if (!defined(STDIO_PTR_LVAL_NOCHANGE_CNT)) /* - * Setting ptr _does_ change cnt - we are done + * Setting ptr _does_ change cnt - we are done */ return; #endif @@ -2451,7 +2495,7 @@ PerlIOStdio_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) #endif /* STDIO_PTR_LVALUE */ } /* - * Now (or only) set cnt + * Now (or only) set cnt */ #ifdef STDIO_CNT_LVALUE PerlSIO_set_cnt(stdio, cnt); @@ -2468,6 +2512,12 @@ PerlIOStdio_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) #endif +PerlIO * +PerlIOStdio_dup(pTHX_ PerlIO *f, PerlIO *o, clone_params *param) +{ + return NULL; +} + PerlIO_funcs PerlIO_stdio = { "stdio", sizeof(PerlIOStdio), @@ -2477,6 +2527,7 @@ PerlIO_funcs PerlIO_stdio = { PerlIOStdio_open, NULL, PerlIOStdio_fileno, + PerlIOStdio_dup, PerlIOStdio_read, PerlIOStdio_unread, PerlIOStdio_write, @@ -2551,7 +2602,7 @@ PerlIO_releaseFILE(PerlIO *p, FILE *f) /*--------------------------------------------------------------------------------------*/ /* - * perlio buffer layer + * perlio buffer layer */ IV @@ -2595,7 +2646,7 @@ PerlIOBuf_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, if (*mode == 'I') { init = 1; /* - * mode++; + * mode++; */ } f = (*tab->Open) (aTHX_ tab, layers, n - 1, mode, fd, imode, perm, @@ -2605,13 +2656,13 @@ PerlIOBuf_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, fd = PerlIO_fileno(f); #if O_BINARY != O_TEXT /* - * do something about failing setmode()? --jhi + * do something about failing setmode()? --jhi */ PerlLIO_setmode(fd, O_BINARY); #endif if (init && fd == 2) { /* - * Initial stderr is unbuffered + * Initial stderr is unbuffered */ PerlIOBase(f)->flags |= PERLIO_F_UNBUF; } @@ -2622,7 +2673,7 @@ PerlIOBuf_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, /* * This "flush" is akin to sfio's sync in that it handles files in either - * read or write state + * read or write state */ IV PerlIOBuf_flush(PerlIO *f) @@ -2631,7 +2682,7 @@ PerlIOBuf_flush(PerlIO *f) int code = 0; if (PerlIOBase(f)->flags & PERLIO_F_WRBUF) { /* - * write() the buffer + * write() the buffer */ STDCHAR *buf = b->buf; STDCHAR *p = buf; @@ -2652,12 +2703,12 @@ PerlIOBuf_flush(PerlIO *f) else if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { STDCHAR *buf = PerlIO_get_base(f); /* - * Note position change + * Note position change */ b->posn += (b->ptr - buf); if (b->ptr < b->end) { /* - * We did not consume all of it + * We did not consume all of it */ if (PerlIO_seek(PerlIONext(f), b->posn, SEEK_SET) == 0) { b->posn = PerlIO_tell(PerlIONext(f)); @@ -2667,7 +2718,7 @@ PerlIOBuf_flush(PerlIO *f) b->ptr = b->end = b->buf; PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF); /* - * FIXME: Is this right for read case ? + * FIXME: Is this right for read case ? */ if (PerlIO_flush(PerlIONext(f)) != 0) code = -1; @@ -2684,7 +2735,7 @@ PerlIOBuf_fill(PerlIO *f) * FIXME: doing the down-stream flush is a bad idea if it causes * pre-read data in stdio buffer to be discarded but this is too * simplistic - as it skips _our_ hosekeeping and breaks tell tests. - * if (!(PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { } + * if (!(PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { } */ if (PerlIO_flush(f) != 0) return -1; @@ -2700,7 +2751,7 @@ PerlIOBuf_fill(PerlIO *f) * Layer below is also buffered We do _NOT_ want to call its * ->Read() because that will loop till it gets what we asked for * which may hang on a pipe etc. Instead take anything it has to - * hand, or ask it to fill _once_. + * hand, or ask it to fill _once_. */ avail = PerlIO_get_cnt(n); if (avail <= 0) { @@ -2763,27 +2814,27 @@ PerlIOBuf_unread(PerlIO *f, const void *vbuf, Size_t count) if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { /* * Buffer is already a read buffer, we can overwrite any chars - * which have been read back to buffer start + * which have been read back to buffer start */ avail = (b->ptr - b->buf); } else { /* * Buffer is idle, set it up so whole buffer is available for - * unread + * unread */ avail = b->bufsiz; b->end = b->buf + avail; b->ptr = b->end; PerlIOBase(f)->flags |= PERLIO_F_RDBUF; /* - * Buffer extends _back_ from where we are now + * Buffer extends _back_ from where we are now */ b->posn -= b->bufsiz; } if (avail > (SSize_t) count) { /* - * If we have space for more than count, just move count + * If we have space for more than count, just move count */ avail = count; } @@ -2792,7 +2843,7 @@ PerlIOBuf_unread(PerlIO *f, const void *vbuf, Size_t count) buf -= avail; /* * In simple stdio-like ungetc() case chars will be already - * there + * there */ if (buf != b->ptr) { Copy(buf, b->ptr, avail, STDCHAR); @@ -2870,12 +2921,12 @@ PerlIOBuf_tell(PerlIO *f) { PerlIOBuf *b = PerlIOSelf(f, PerlIOBuf); /* - * b->posn is file position where b->buf was read, or will be written + * b->posn is file position where b->buf was read, or will be written */ Off_t posn = b->posn; if (b->buf) { /* - * If buffer is valid adjust position by amount in buffer + * If buffer is valid adjust position by amount in buffer */ posn += (b->ptr - b->buf); } @@ -2958,6 +3009,14 @@ PerlIOBuf_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) PerlIOBase(f)->flags |= PERLIO_F_RDBUF; } +PerlIO * +PerlIOBuf_dup(pTHX_ PerlIO *f, PerlIO *o, clone_params *param) +{ + return NULL; +} + + + PerlIO_funcs PerlIO_perlio = { "perlio", sizeof(PerlIOBuf), @@ -2967,6 +3026,7 @@ PerlIO_funcs PerlIO_perlio = { PerlIOBuf_open, NULL, PerlIOBase_fileno, + PerlIOBuf_dup, PerlIOBuf_read, PerlIOBuf_unread, PerlIOBuf_write, @@ -2988,14 +3048,14 @@ PerlIO_funcs PerlIO_perlio = { /*--------------------------------------------------------------------------------------*/ /* - * Temp layer to hold unread chars when cannot do it any other way + * Temp layer to hold unread chars when cannot do it any other way */ IV PerlIOPending_fill(PerlIO *f) { /* - * Should never happen + * Should never happen */ PerlIO_flush(f); return 0; @@ -3005,7 +3065,7 @@ IV PerlIOPending_close(PerlIO *f) { /* - * A tad tricky - flush pops us, then we close new top + * A tad tricky - flush pops us, then we close new top */ PerlIO_flush(f); return PerlIO_close(f); @@ -3015,7 +3075,7 @@ IV PerlIOPending_seek(PerlIO *f, Off_t offset, int whence) { /* - * A tad tricky - flush pops us, then we seek new top + * A tad tricky - flush pops us, then we seek new top */ PerlIO_flush(f); return PerlIO_seek(f, offset, whence); @@ -3052,8 +3112,8 @@ PerlIOPending_pushed(PerlIO *f, const char *mode, SV *arg) IV code = PerlIOBase_pushed(f, mode, arg); PerlIOl *l = PerlIOBase(f); /* - * Our PerlIO_fast_gets must match what we are pushed on, or sv_gets() - * etc. get muddled when it changes mid-string when we auto-pop. + * Our PerlIO_fast_gets must match what we are pushed on, or sv_gets() + * etc. get muddled when it changes mid-string when we auto-pop. */ l->flags = (l->flags & ~(PERLIO_F_FASTGETS | PERLIO_F_UTF8)) | (PerlIOBase(PerlIONext(f))-> @@ -3088,6 +3148,7 @@ PerlIO_funcs PerlIO_pending = { NULL, NULL, PerlIOBase_fileno, + PerlIOBuf_dup, PerlIOPending_read, PerlIOBuf_unread, PerlIOBuf_write, @@ -3113,12 +3174,12 @@ PerlIO_funcs PerlIO_pending = { /* * crlf - translation On read translate CR,LF to "\n" we do this by * overriding ptr/cnt entries to hand back a line at a time and keeping a - * record of which nl we "lied" about. On write translate "\n" to CR,LF + * record of which nl we "lied" about. On write translate "\n" to CR,LF */ typedef struct { PerlIOBuf base; /* PerlIOBuf stuff */ - STDCHAR *nl; /* Position of crlf we "lied" about in the + STDCHAR *nl; /* Position of crlf we "lied" about in the * buffer */ } PerlIOCrlf; @@ -3208,7 +3269,7 @@ PerlIOCrlf_get_cnt(PerlIO *f) } else { /* - * Not CR,LF but just CR + * Not CR,LF but just CR */ nl++; goto scan; @@ -3216,12 +3277,12 @@ PerlIOCrlf_get_cnt(PerlIO *f) } else { /* - * Blast - found CR as last char in buffer + * Blast - found CR as last char in buffer */ if (b->ptr < nl) { /* * They may not care, defer work as long as - * possible + * possible */ return (nl - b->ptr); } @@ -3241,7 +3302,7 @@ PerlIOCrlf_get_cnt(PerlIO *f) if (code == 0) goto test; /* fill() call worked */ /* - * CR at EOF - just fall through + * CR at EOF - just fall through */ } } @@ -3272,7 +3333,7 @@ PerlIOCrlf_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) } else { /* - * Test code - delete when it works ... + * Test code - delete when it works ... */ STDCHAR *chk; if (c->nl) @@ -3294,7 +3355,7 @@ PerlIOCrlf_set_ptrcnt(PerlIO *f, STDCHAR * ptr, SSize_t cnt) if (c->nl) { if (ptr > c->nl) { /* - * They have taken what we lied about + * They have taken what we lied about */ *(c->nl) = 0xd; c->nl = NULL; @@ -3325,7 +3386,7 @@ PerlIOCrlf_write(PerlIO *f, const void *vbuf, Size_t count) if (*buf == '\n') { if ((b->ptr + 2) > eptr) { /* - * Not room for both + * Not room for both */ PerlIO_flush(f); break; @@ -3376,6 +3437,7 @@ PerlIO_funcs PerlIO_crlf = { PerlIOBuf_open, NULL, PerlIOBase_fileno, + PerlIOBuf_dup, PerlIOBuf_read, /* generic read works with ptr/cnt lies * ... */ PerlIOCrlf_unread, /* Put CR,LF in buffer for each '\n' */ @@ -3399,7 +3461,7 @@ PerlIO_funcs PerlIO_crlf = { #ifdef HAS_MMAP /*--------------------------------------------------------------------------------------*/ /* - * mmap as "buffer" layer + * mmap as "buffer" layer */ typedef struct { @@ -3469,7 +3531,7 @@ PerlIOMmap_map(PerlIO *f) if (b->posn < 0) { /* * This is a hack - should never happen - open should - * have set it ! + * have set it ! */ b->posn = PerlIO_tell(PerlIONext(f)); } @@ -3534,13 +3596,13 @@ PerlIOMmap_get_base(PerlIO *f) PerlIOBuf *b = &m->base; if (b->buf && (PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { /* - * Already have a readbuffer in progress + * Already have a readbuffer in progress */ return b->buf; } if (b->buf) { /* - * We have a write buffer or flushed PerlIOBuf read buffer + * We have a write buffer or flushed PerlIOBuf read buffer */ m->bbuf = b->buf; /* save it in case we need it again */ b->buf = NULL; /* Clear to trigger below */ @@ -3549,7 +3611,7 @@ PerlIOMmap_get_base(PerlIO *f) PerlIOMmap_map(f); /* Try and map it */ if (!b->buf) { /* - * Map did not work - recover PerlIOBuf buffer if we have one + * Map did not work - recover PerlIOBuf buffer if we have one */ b->buf = m->bbuf; } @@ -3575,11 +3637,11 @@ PerlIOMmap_unread(PerlIO *f, const void *vbuf, Size_t count) } if (m->len) { /* - * Loose the unwritable mapped buffer + * Loose the unwritable mapped buffer */ PerlIO_flush(f); /* - * If flush took the "buffer" see if we have one from before + * If flush took the "buffer" see if we have one from before */ if (!b->buf && m->bbuf) b->buf = m->bbuf; @@ -3598,14 +3660,14 @@ PerlIOMmap_write(PerlIO *f, const void *vbuf, Size_t count) PerlIOBuf *b = &m->base; if (!b->buf || !(PerlIOBase(f)->flags & PERLIO_F_WRBUF)) { /* - * No, or wrong sort of, buffer + * No, or wrong sort of, buffer */ if (m->len) { if (PerlIOMmap_unmap(f) != 0) return 0; } /* - * If unmap took the "buffer" see if we have one from before + * If unmap took the "buffer" see if we have one from before */ if (!b->buf && m->bbuf) b->buf = m->bbuf; @@ -3624,12 +3686,12 @@ PerlIOMmap_flush(PerlIO *f) PerlIOBuf *b = &m->base; IV code = PerlIOBuf_flush(f); /* - * Now we are "synced" at PerlIOBuf level + * Now we are "synced" at PerlIOBuf level */ if (b->buf) { if (m->len) { /* - * Unmap the buffer + * Unmap the buffer */ if (PerlIOMmap_unmap(f) != 0) code = -1; @@ -3637,7 +3699,7 @@ PerlIOMmap_flush(PerlIO *f) else { /* * We seem to have a PerlIOBuf buffer which was not mapped - * remember it in case we need one later + * remember it in case we need one later */ m->bbuf = b->buf; } @@ -3675,6 +3737,12 @@ PerlIOMmap_close(PerlIO *f) return code; } +PerlIO * +PerlIOMmap_dup(pTHX_ PerlIO *f, PerlIO *o, clone_params *param) +{ + return NULL; +} + PerlIO_funcs PerlIO_mmap = { "mmap", @@ -3685,6 +3753,7 @@ PerlIO_funcs PerlIO_mmap = { PerlIOBuf_open, NULL, PerlIOBase_fileno, + PerlIOMmap_dup, PerlIOBuf_read, PerlIOMmap_unread, PerlIOMmap_write, @@ -3775,7 +3844,7 @@ PerlIO_getname(PerlIO *f, char *buf) /*--------------------------------------------------------------------------------------*/ /* * Functions which can be called on any kind of PerlIO implemented in - * terms of above + * terms of above */ #undef PerlIO_getc @@ -3877,7 +3946,7 @@ PerlIO * PerlIO_tmpfile(void) { /* - * I have no idea how portable mkstemp() is ... + * I have no idea how portable mkstemp() is ... */ #if defined(WIN32) || !defined(HAVE_MKSTEMP) dTHX; @@ -3916,8 +3985,8 @@ PerlIO_tmpfile(void) /*======================================================================================*/ /* - * Now some functions in terms of above which may be needed even if we are - * not in true PerlIO mode + * Now some functions in terms of above which may be needed even if we are + * not in true PerlIO mode */ #ifndef HAS_FSETPOS |