diff options
Diffstat (limited to 'vms/config.vms')
| -rw-r--r-- | vms/config.vms | 1440 |
1 files changed, 1440 insertions, 0 deletions
diff --git a/vms/config.vms b/vms/config.vms new file mode 100644 index 0000000000..6deaac7eca --- /dev/null +++ b/vms/config.vms @@ -0,0 +1,1440 @@ +/* + * This file was produced by hand because the configure utilities which + * are in the perl distribution are all shell scripts. Someday, I hope + * we'll get a perl configure utility, but until then . . . + * + * Feel free to add or change things to suit your needs, but be careful + * about moving the comments which say "config-skip" - they're used by + * GenConfig.pl when producing Config.pm. + * + * config.h for VMS + */ + +/* Configuration time: 12-Oct-1994 17:00 + * Configured by: Charles Bailey bailey@genetics.upenn.edu + * Target system: VMS + */ + +#ifndef _config_h_ +#define _config_h_ + +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double. Usual values are 2, 4 and 8. + */ +#define MEM_ALIGNBYTES 8 /**/ + +/* BYTEORDER: + * This symbol hold the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + */ +#define BYTEORDER 0x1234 /* large digits for MSB */ + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +#undef ARCHLIB /**/ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#ifdef __STDC__ +#define CAT2(a,b) a##b /* config-skip */ +#define CAT3(a,b,c) a##b##c /* config-skip */ +#define CAT4(a,b,c,d) a##b##c##d /* config-skip */ +#define CAT5(a,b,c,d,e) a##b##c##d##e /* config-skip */ +#define STRINGIFY(a) #a /* config-skip */ +#else +#define CAT2(a,b) a/**/b /* config-skip */ +#define CAT3(a,b,c) a/**/b/**/c /* config-skip */ +#define CAT4(a,b,c,d) a/**/b/**/c/**/d /* config-skip */ +#define CAT5(a,b,c,d,e) a/**/b/**/c/**/d/**/e /* config-skip */ +#define STRINGIFY(a) "a" /* config-skip */ +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +#define CPPSTDIN "cc/noobj/preprocess=sys$output sys$input" +#define CPPMINUS "" + +/* HAS_BCMP: + * This symbol is defined if the bcmp() routine is available to + * compare blocks of memory. + */ +#undef HAS_BCMP /**/ + +/* HAS_BCOPY: + * This symbol is defined if the bcopy() routine is available to + * copy blocks of memory. + */ +#undef HAS_BCOPY /**/ + +/* HAS_BZERO: + * This symbol is defined if the bzero() routine is available to + * set a memory block to 0. + */ +#undef HAS_BZERO /**/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + */ +#define CASTNEGFLOAT /**/ +#define CASTFLAGS 0 /**/ + +/* CHARSPRINTF: + * This symbol is defined if this system declares "char *sprintf()" in + * stdio.h. The trend seems to be to declare it as "int sprintf()". It + * is up to the package author to declare sprintf correctly based on the + * symbol. + */ +#undef CHARSPRINTF /**/ + +/* HAS_CHSIZE: + * This symbol, if defined, indicates that the chsize routine is available + * to truncate files. You might need a -lx to get this routine. + */ +#undef HAS_CHSIZE /**/ + +/* HASCONST: + * This symbol, if defined, indicates that this C compiler knows about + * the const type. There is no need to actually test for that symbol + * within your programs. The mere use of the "const" keyword will + * trigger the necessary tests. + */ +#define HASCONST /**/ +#ifndef HASCONST +#define const +#endif + +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. + */ +#undef HAS_CRYPT /**/ + +/* CSH: + * This symbol, if defined, indicates that the C-shell exists. + * If defined, contains the full pathname of csh. + */ +#undef CSH /**/ + +/* HAS_DUP2: + * This symbol, if defined, indicates that the dup2 routine is + * available to duplicate file descriptors. + */ +#define HAS_DUP2 /**/ + +/* HAS_FCHMOD: + * This symbol, if defined, indicates that the fchmod routine is available + * to change mode of opened files. If unavailable, use chmod(). + */ +#undef HAS_FCHMOD /**/ + +/* HAS_FCHOWN: + * This symbol, if defined, indicates that the fchown routine is available + * to change ownership of opened files. If unavailable, use chown(). + */ +#undef HAS_FCHOWN /**/ + +/* HAS_FCNTL: + * This symbol, if defined, indicates to the C program that + * the fcntl() function exists. + */ +#undef HAS_FCNTL /**/ + +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#define HAS_FGETPOS /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#define FLEXFILENAMES /**/ + +/* HAS_FLOCK: + * This symbol, if defined, indicates that the flock routine is + * available to do file locking. + */ +#undef HAS_FLOCK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#define HAS_FSETPOS /**/ + +/* HAS_GETGROUPS: + * This symbol, if defined, indicates that the getgroups() routine is + * available to get the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +#undef HAS_GETGROUPS /**/ + +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +#undef HAS_UNAME /**/ + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +#undef HAS_GETPGRP /**/ + +/* HAS_GETPGRP2: + * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) + * routine is available to get the current process group. + */ +#undef HAS_GETPGRP2 /**/ + +/* HAS_GETPRIORITY: + * This symbol, if defined, indicates that the getpriority routine is + * available to get a process's priority. + */ +#undef HAS_GETPRIORITY /**/ + +/* HAS_KILLPG: + * This symbol, if defined, indicates that the killpg routine is available + * to kill process groups. If unavailable, you probably should use kill + * with a negative process number. + */ +#undef HAS_KILLPG /**/ + +/* HAS_LINK: + * This symbol, if defined, indicates that the link routine is + * available to create hard links. + */ +#undef HAS_LINK /**/ + +/* HAS_LSTAT: + * This symbol, if defined, indicates that the lstat routine is + * available to do file stats on symbolic links. + */ +#undef HAS_LSTAT /**/ + +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +#undef HAS_LOCKF /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +#undef HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +#undef HAS_MBTOWC /**/ + +/* HAS_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * to compare blocks of memory. + */ +#define HAS_MEMCMP /**/ + +/* HAS_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy blocks of memory. + */ +#define HAS_MEMCPY /**/ + +/* HAS_MEMMOVE: + * This symbol, if defined, indicates that the memmove routine is available + * to copy potentially overlapping blocks of memory. This should be used + * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your + * own version. + */ +#define HAS_MEMMOVE /**/ + +/* HAS_MEMSET: + * This symbol, if defined, indicates that the memset routine is available + * to set blocks of memory. + */ +#define HAS_MEMSET /**/ + +/* HAS_MKDIR: + * This symbol, if defined, indicates that the mkdir routine is available + * to create directories. Otherwise you should fork off a new process to + * exec /bin/mkdir. + */ +#define HAS_MKDIR /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +#undef HAS_MSG /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#define HAS_OPEN3 /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * <dirent.h>. See I_DIRENT. + */ +#define HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_REWINDDIR /**/ + +/* HAS_RENAME: + * This symbol, if defined, indicates that the rename routine is available + * to rename files. Otherwise you should do the unlink(), link(), unlink() + * trick. + */ +#define HAS_RENAME /**/ + +/* HAS_RMDIR: + * This symbol, if defined, indicates that the rmdir routine is + * available to remove directories. Otherwise you should fork off a + * new process to exec /bin/rmdir. + */ +#define HAS_RMDIR /**/ + +/* HAS_SELECT: + * This symbol, if defined, indicates that the select routine is + * available to select active file descriptors. If the timeout field + * is used, <sys/time.h> may need to be included. + */ +#undef HAS_SELECT /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +#undef HAS_SEM /**/ + +/* HAS_SETEGID: + * This symbol, if defined, indicates that the setegid routine is available + * to change the effective gid of the current program. + */ +#undef HAS_SETEGID /**/ + +/* HAS_SETEUID: + * This symbol, if defined, indicates that the seteuid routine is available + * to change the effective uid of the current program. + */ +#undef HAS_SETEUID /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +#undef HAS_SETLOCALE /**/ + +/* HAS_SETPGID: + * This symbol, if defined, indicates that the setpgid routine is + * available to set process group ID. + */ +#undef HAS_SETPGID /**/ + +/* HAS_SETPGRP2: + * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) + * routine is available to set the current process group. + */ +#undef HAS_SETPGRP2 /**/ + +/* HAS_SETPRIORITY: + * This symbol, if defined, indicates that the setpriority routine is + * available to set a process's priority. + */ +#undef HAS_SETPRIORITY /**/ + +/* HAS_SETREGID: + * This symbol, if defined, indicates that the setregid routine is + * available to change the real and effective gid of the current + * process. + */ +/* HAS_SETRESGID: + * This symbol, if defined, indicates that the setresgid routine is + * available to change the real, effective and saved gid of the current + * process. + */ +#undef HAS_SETREGID /**/ +#undef HAS_SETRESGID /**/ + +/* HAS_SETREUID: + * This symbol, if defined, indicates that the setreuid routine is + * available to change the real and effective uid of the current + * process. + */ +/* HAS_SETRESUID: + * This symbol, if defined, indicates that the setresuid routine is + * available to change the real, effective and saved uid of the current + * process. + */ +#undef HAS_SETREUID /**/ +#undef HAS_SETRESUID /**/ + +/* HAS_SETRGID: + * This symbol, if defined, indicates that the setrgid routine is available + * to change the real gid of the current program. + */ +#undef HAS_SETRGID /**/ + +/* HAS_SETRUID: + * This symbol, if defined, indicates that the setruid routine is available + * to change the real uid of the current program. + */ +#undef HAS_SETRUID /**/ + +/* HAS_SETSID: + * This symbol, if defined, indicates that the setsid routine is + * available to set the process group ID. + */ +#undef HAS_SETSID /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +#undef HAS_SHM /**/ + +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. + */ +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. + */ +#undef Shmat_t char * /**/ /* config-skip */ +#undef HAS_SHMAT_PROTOTYPE /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#undef USE_STAT_BLOCKS /**/ + +/* USE_STD_STDIO: + * This symbol is defined if this system has a FILE structure declaring + * _ptr and _cnt in stdio.h. + */ +#undef USE_STD_STDIO /**/ + +/* USE_STRUCT_COPY: + * This symbol, if defined, indicates that this C compiler knows how + * to copy structures. If undefined, you'll need to use a block copy + * routine of some sort instead. + */ +#define USE_STRUCT_COPY /**/ + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +#undef HAS_SYS_ERRLIST /**/ +#ifdef HAS_STRERROR +# define Strerror(e) strerror((e),vaxc$errno) +#else +#define Strerror(e) ((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e]) /**/ /* config-skip */ +#endif + +/* HAS_SYMLINK: + * This symbol, if defined, indicates that the symlink routine is available + * to create symbolic links. + */ +#undef HAS_SYMLINK /**/ + +/* HAS_SYSCALL: + * This symbol, if defined, indicates that the syscall routine is + * available to call arbitrary system calls. If undefined, that's tough. + */ +#undef HAS_SYSCALL /**/ + +/* HAS_SYSTEM: + * This symbol, if defined, indicates that the system routine is + * available to issue a shell command. + */ +#define HAS_SYSTEM /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case <sys/types.h> should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. + */ +#undef HAS_TRUNCATE /**/ + + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +#define HAS_VFORK /**/ + +/* HASVOLATILE: + * This symbol, if defined, indicates that this C compiler knows about + * the volatile declaration. + */ +#define HASVOLATILE /**/ +#ifndef HASVOLATILE +#define volatile /* config-skip */ +#endif + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +#undef USE_CHAR_VSPRINTF /**/ + +/* HAS_WAIT4: + * This symbol, if defined, indicates that wait4() exists. + */ +#undef HAS_WAIT4 /**/ + +/* HAS_WAITPID: + * This symbol, if defined, indicates that the waitpid routine is + * available to wait for child process. + */ +#undef HAS_WAITPID /**/ + +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. + */ +#undef HAS_WCSTOMBS /**/ + +/* I_DIRENT: + * This symbol, if defined, indicates to the C program that it should + * include <dirent.h>. Using this symbol also triggers the definition + * of the Direntry_t define which ends up being 'struct dirent' or + * 'struct direct' depending on the availability of <dirent.h>. + */ +/* DIRNAMLEN: + * This symbol, if defined, indicates to the C program that the length + * of directory entry names is provided by a d_namlen field. Otherwise + * you need to do strlen() on the d_name field. + */ +#undef I_DIRENT /**/ +#define DIRNAMLEN /**/ +#define Direntry_t struct dirent + +/* I_FCNTL: + * This manifest constant tells the C program to include <fcntl.h>. + */ +#undef I_FCNTL /**/ + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include <grp.h>. + */ +#undef I_GRP /**/ + +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include <limits.h> to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#undef I_LIMITS /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include <memory.h>. + */ +#undef I_MEMORY /**/ + +/* I_NDBM: + * This symbol, if defined, indicates that ndbm.h exists and should + * be included. + */ +#undef I_NDBM /**/ + +/* I_STDARG: + * This symbol, if defined, indicates that <stdarg.h> exists and should + * be included. + */ +#define I_STDARG /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include <pwd.h>. + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +#undef I_PWD /**/ +#undef PWQUOTA /**/ +#undef PWAGE /**/ +#undef PWCHANGE /**/ +#undef PWCLASS /**/ +#undef PWEXPIRE /**/ +#undef PWCOMMENT /**/ + +/* I_STDDEF: + * This symbol, if defined, indicates that <stddef.h> exists and should + * be included. + */ +#define I_STDDEF /**/ + +/* I_STDLIB: +* This symbol, if defined, indicates that <stdlib.h> exists and should +* be included. +*/ +#define I_STDLIB /**/ + +/* I_STRING: + * This symbol, if defined, indicates to the C program that it should + * include <string.h> (USG systems) instead of <strings.h> (BSD systems). + */ +#define I_STRING /**/ + +/* I_SYS_DIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/dir.h>. + */ +#undef I_SYS_DIR /**/ + +/* I_SYS_FILE: + * This symbol, if defined, indicates to the C program that it should + * include <sys/file.h> to get definition of R_OK and friends. + */ +#undef I_SYS_FILE /**/ + +/* I_SYS_IOCTL: + * This symbol, if defined, indicates that <sys/ioctl.h> exists and should + * be included. Otherwise, include <sgtty.h> or <termio.h>. + */ +#undef I_SYS_IOCTL /**/ + +/* HAS_IOCTL: + * This symbol, if defined, indicates that the ioctl() routine is + * available to set I/O characteristics + */ +#undef HAS_IOCTL /**/ + +/* I_SYS_NDIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/ndir.h>. + */ +#undef I_SYS_NDIR /**/ + +/* I_SYS_SELECT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/select.h> in order to get definition of struct timeval. + */ +#undef I_SYS_SELECT /**/ + + +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/times.h>. + */ +#undef I_SYS_TIMES /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * <termio.h> rather than <sgtty.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * <sgtty.h> rather than <termio.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +#undef I_TERMIO /**/ +#undef I_SGTTY /**/ +#undef I_TERMIOS /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <time.h>. + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h>. + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h> with KERNEL defined. + */ +#define I_TIME /**/ +#undef I_SYS_TIME /**/ +#undef I_SYS_TIME_KERNEL /**/ + +/* I_UNISTD: + * This symbol, if defined, indicates to the C program that it should + * include <unistd.h>. + */ +#undef I_UNISTD /**/ + +/* I_UTIME: + * This symbol, if defined, indicates to the C program that it should + * include <utime.h>. + */ +#undef I_UTIME /**/ + +/* HAS_UTIME: + * This symbol, if defined, indicates that the routine utime() is + * available to update the access and modification times of files. + */ +#undef HAS_UTIME /**/ + +/* I_STDARG: + * This symbol, if defined, indicates that <stdarg.h> exists and should + * be included. + */ +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include <varargs.h>. + */ +#define I_STDARG /**/ +#undef I_VARARGS /**/ + + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +#undef I_VFORK /**/ + +/* INTSIZE: + * This symbol contains the size of an int, so that the C preprocessor + * can make decisions based on it. + */ +#define INTSIZE 4 /**/ + + +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. + */ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#define CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args /* config-skip */ +#else +#define _(args) () /* config-skip */ +#endif + +/* RANDBITS: + * This symbol contains the number of bits of random number the rand() + * function produces. Usual values are 15, 16, and 31. + */ +#define RANDBITS 31 /**/ + + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t fd_set * /**/ + +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". + */ +#define STDCHAR char /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ /* config-skip */ +#define M_VOID /* Xenix strikes again */ /* config-skip */ +#endif + + +/* EUNICE: + * This symbol, if defined, indicates that the program is being compiled + * under the EUNICE package under VMS. The program will need to handle + * things like files that don't go away the first time you unlink them, + * due to version numbering. It will also need to compensate for lack + * of a respectable link() command. + */ +/* VMS: + * This symbol, if defined, indicates that the program is running under + * VMS. It is currently only set in conjunction with the EUNICE symbol. + */ +#define EUNICE /**/ +/* This symbol is automagically defined by all VMS C compilers I've seen. + * Just in case, however . . . */ +#ifndef VMS +#define VMS /**/ +#endif + +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. + */ +#define LOC_SED "_NLA0:" /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +#define BIN "/perl_root/000000" /**/ + +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +#define HAS_ALARM /**/ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +#define CASTI32 /**/ + +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +#define HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +#undef HAS_CHROOT /**/ + +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. + */ +#define HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +#define HAS_DBL_DIG /* */ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#define HAS_DIFFTIME /**/ + +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +/* VMS: In vmsish.h, fork is #defined to vfork. This kludge gets around + * some obsolete code in pp.c, which should be fixed in its own right + * sometime. - C. Bailey 26-Aug-1994 + */ +#define HAS_FORK /**/ + +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available. + */ +#undef HAS_GETLOGIN /**/ + +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available. + */ +#undef HAS_GETPPID /**/ + +/* HAS_GROUP: + * This symbol, if defined, indicates that the group routine is + * available. + */ +#undef HAS_GROUP /**/ + + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +#undef HAS_MBLEN /**/ + +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#undef HAS_MKTIME /**/ + +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. + */ +#define HAS_NICE /**/ + +/* HAS_PASSWD: + * This symbol, if defined, indicates that the passwd routine is + * available. + */ +#undef HAS_PASSWD /**/ + +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available. + */ +#define HAS_PAUSE /**/ + +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available. + */ +#define HAS_PIPE /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available. + */ +#undef HAS_READLINK /**/ + +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +#undef HAS_SETLINEBUF /**/ + +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#define HAS_STRCHR /**/ +#undef HAS_INDEX /**/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#undef HAS_STRCOLL /**/ + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to compare strings using collating information. + */ +#undef HAS_STRXFRM /**/ + +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. + */ +#undef HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +#undef HAS_TCSETPGRP /**/ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include <sys/times.h>. + */ +#define HAS_TIMES /**/ + +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. + */ +#undef HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to get the file creation mask. + */ +#define HAS_UMASK /**/ + +/* VOIDSIG: + * This symbol is defined if this system declares "void (*signal(...))()" in + * signal.h. The old way was to declare it as "int (*signal(...))()". It + * is up to the package author to declare things correctly based on the + * symbol. + */ +#define VOIDSIG /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +#undef HAS_WCTOMB /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Gid_t unsigned int /* Type for getgid(), etc... */ + +/* I_DLFCN: + * This symbol, if defined, indicates that <dlfcn.h> exists and should + * be included. + */ +#undef I_DLFCN /**/ + +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include <float.h> to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. + */ +#define I_FLOAT /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include <math.h>. + */ +#define I_MATH /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Off_t int /* <offset> type */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +#undef MYMALLOC /**/ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include <sys/types.h> + * to get any typedef'ed information. + */ +#define Mode_t unsigned int /* file mode parameter for system calls*/ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include <sys/types.h> or <unistd.h> + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t int /* signed count of bytes */ + + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +#define PRIVLIB "/perl_root/lib" /**/ + +/* SCRIPTDIR: + * This symbol holds the name of the directory in which the user wants + * to put publicly executable scripts for the package in question. It + * is often a directory that is mounted across diverse architectures. + * Programs must be prepared to deal with ~name expansion. + */ +#define SCRIPTDIR "/perl_root/script" /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + */ +#define SIG_NAME "HUP","INT","QUIT","ILL","TRAP","IOT","EMT","FPE","KILL",\ + "BUS","SEGV","SYS","PIPE","ALRM","TERM" + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Size_t size_t /* length paramater for string functions */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Uid_t unsigned int /* UID type */ + +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include <sys/param.h>. + */ +#undef I_SYS_PARAM + +/* GNUC_ATTRIBUTE_CHECK: + * This symbol indicates the C compiler can check for function attributes, + * such as printf formats. + */ +/* VMS: true for gcc, undef for VAXC/DECC. This is handled in Descrip.MMS + * C. Bailey 26-Aug-1994 + */ +/*#define GNUC_ATTRIBUTE_CHECK /* */ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +#define VOID_CLOSEDIR /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available. +*/ +#undef HAS_DLERROR /**/ + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +#undef DLSYM_NEEDS_UNDERSCORE /* */ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that setuid scripts are secure. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +#undef SETUID_SCRIPTS_ARE_SECURE_NOW /**/ +#undef DOSUID /**/ + +/* HAS_DREM: + * This symbol, if defined, indicates that the drem routine is + * available. This is a Pyramid routine that is the same as + * fmod. + */ +#undef HAS_DREM /**/ + +/* HAS_FMOD: + * This symbol, if defined, indicates that the fmod routine is + * available. + */ +#define HAS_FMOD /**/ + +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. + */ +#define Gconvert(x,n,t,b) my_gconvert(x,n,t,b) + +/* HAS_ISASCII: + * This manifest constant lets the C program know that the + * isascii is available. + */ +#define HAS_ISASCII /**/ + +/* USE_LINUX_STDIO: + * This symbol is defined if this system has a FILE structure declaring + * _IO_read_base, _IO_read_ptr, and _IO_read_end in stdio.h. + */ +#undef USE_LINUX_STDIO /**/ + +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. + */ +#undef HAS_LOCALECONV /**/ + +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available. + */ +#undef HAS_MKFIFO /**/ + +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. + */ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +#undef HAS_PATHCONF /**/ +#undef HAS_FPATHCONF /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#undef HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +#define HAS_SAFE_MEMCPY /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSDPGRP: + * This symbol, if defined, indicates that the BSD notion of process + * group is to be used. For instance, you have to say setpgrp(pid, pgrp) + * instead of the USG setpgrp(). + */ +#undef HAS_SETPGRP /**/ +#undef USE_BSDPGRP /**/ + +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. + */ +#undef HAS_SYSCONF /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#define USE_DYNAMIC_LOADING /**/ + +#ifdef VMS_DO_SOCKETS +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +#define HAS_SOCKET /**/ /* config-skip */ +#undef HAS_SOCKETPAIR /**/ /* config-skip */ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent routine is + * available to lookup host names in some data base or other. + */ +#define HAS_GETHOSTENT /**/ /* config-skip */ + +/* VMS: In general, TCP/IP header files should be included from + * sockadapt.h, instead of here, in order to keep the TCP/IP code + * together as much as possible. + */ +/* I_NETINET_IN: + * This symbol, if defined, indicates to the C program that it should + * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. + */ +#undef I_NETINET_IN /**/ /* config-skip */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups(). Usually, this is the same of gidtype, but + * sometimes it isn't. It can be int, ushort, uid_t, etc... + * It may be necessary to include <sys/types.h> to get any + * typedef'ed information. This is only required if you have + * getgroups(). + */ +#ifdef HAS_GETGROUPS +#define Groups_t unsigned int /* Type for 2nd arg to getgroups() */ /* config-skip */ +#endif + +/* I_NET_ERRNO: + * This symbol, if defined, indicates that <net/errno.h> exists and + * should be included. +*/ +#undef I_NET_ERRNO /**/ /* config-skip */ + +#else /* VMS_DO_SOCKETS */ + +#undef HAS_SOCKET /**/ /* config-skip */ +#undef HAS_SOCKETPAIR /**/ /* config-skip */ +#undef HAS_GETHOSTENT /**/ /* config-skip */ +#undef I_NETINET_IN /**/ /* config-skip */ +#undef I_NET_ERRNO /**/ /* config-skip */ + +#endif /* !VMS_DO_SOCKETS */ + +#endif |