diff options
Diffstat (limited to 'vms/descrip_mms.template')
| -rw-r--r-- | vms/descrip_mms.template | 61 |
1 files changed, 53 insertions, 8 deletions
diff --git a/vms/descrip_mms.template b/vms/descrip_mms.template index 2bf0114532..c34be75e0a 100644 --- a/vms/descrip_mms.template +++ b/vms/descrip_mms.template @@ -22,6 +22,7 @@ #### Start of system configuration section. #### ~DECC~ +~DECCXX~ ~GNUC~ ~ARCH-TYPE~ = 1 ~THREAD~ @@ -131,7 +132,11 @@ DBGSPECFLAGS = /Show=All @ If F$TrnLnm("Sys").eqs."" .and. F$TrnLnm("DECC$System_Include").eqs."" Then Define/NoLog SYS DECC$Library_Include .endif +.ifdef DECCXX +XTRACCFLAGS = /Include=[]/Standard=ANSI/Prefix=All/Obj=$(OBJVAL) +.else XTRACCFLAGS = /Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=$(OBJVAL) +.endif XTRADEF = POSIX = POSIX .endif @@ -218,6 +223,7 @@ NOOP = continue # are built using these macros should depend on $(MINIPERL_EXE) MINIPERL_EXE = Sys$Disk:[]miniperl$(E) MINIPERL = MCR $(MINIPERL_EXE) "-I[.lib]" +MINIPERLQ = MCR $(MINIPERL_EXE) ""-I[.lib]"" XSUBPP = $(MINIPERL) "-I[.ext.re]" [.lib.extutils]xsubpp -noprototypes # Macro to invoke a preexisting copy of Perl. This is used to regenerate # some header files when rebuilding Perl, but premade versions are provided @@ -299,7 +305,11 @@ ac8 = $(ARCHCORE)perlapi.h $(ARCHCORE)perlio.h $(ARCHCORE)perlsdio.h ac9 = $(ARCHCORE)perlvars.h $(ARCHCORE)perly.h $(ARCHCORE)pp.h ac10 = $(ARCHCORE)pp_proto.h $(ARCHCORE)proto.h $(ARCHCORE)regcomp.h ac11 = $(ARCHCORE)regexp.h $(ARCHCORE)regnodes.h $(ARCHCORE)scope.h +.ifdef SOCKARCH ac12 = $(ARCHCORE)sv.h $(ARCHCORE)thrdvar.h $(SOCKARCH) +.else +ac12 = $(ARCHCORE)sv.h $(ARCHCORE)thrdvar.h +.endif ac13 = $(ARCHCORE)thread.h $(ARCHCORE)utf8.h $(ARCHCORE)util.h ac14 = $(ARCHCORE)vmsish.h $(ARCHCORE)warnings.h $(ARCHCORE)xsub.h acopt = $(ARCHCORE)perlshr_attr.opt $(ARCHCORE)$(DBG)perlshr_bld.opt @@ -327,17 +337,19 @@ CRTLOPTS =,$(CRTL)/Options .endif # Modules which must be installed before we can build extensions -LIBPREREQ = $(ARCHDIR)Config.pm [.lib]DynaLoader.pm [.lib]XSLoader.pm [.lib]lib.pm [.lib]vmsish.pm [.lib.VMS]Filespec.pm [.lib.ExtUtils]XSSymSet.pm +LIBPREREQ = $(ARCHDIR)Config.pm [.lib.VMS]Filespec.pm [.lib]DynaLoader.pm [.lib]XSLoader.pm [.lib]lib.pm [.lib]vmsish.pm [.lib.ExtUtils]XSSymSet.pm $(ARCHDIR)vmspipe.com [.lib]re.pm utils1 = [.lib.pod]perldoc.com [.lib.ExtUtils]Miniperl.pm [.utils]c2ph.com [.utils]h2ph.com [.utils]h2xs.com [.lib]perlbug.com [.lib]perlcc.com [.utils]dprofpp.com utils2 = [.lib]splain.com [.utils]pl2pm.com .ifdef NOX2P all : base extras archcorefiles preplibrary perlpods - @ $(NOOP) + @ write sys$output " " + @ write sys$output " Everything is up to date. '$(MMS)$(MMSQUALIFIERS) test' to run test suite." .else all : base extras x2p archcorefiles preplibrary perlpods - @ $(NOOP) + @ write sys$output " " + @ write sys$output " Everything is up to date. '$(MMS)$(MMSQUALIFIERS) test' to run test suite." .endif base : miniperl perl @ $(NOOP) @@ -382,7 +394,13 @@ perlpods : $(pod) archcorefiles : $(ac) $(acth) $(ARCHAUTO)time.stamp @ $(NOOP) -miniperl : $(DBG)miniperl$(E) +[.lib]re.pm : [.ext.re]re.pm + copy/log $(MMS$SOURCE) $(MMS$TARGET) + +vmspipe.com : [.vms]vmspipe.com + copy/log $(MMS$SOURCE) $(MMS$TARGET) + +miniperl : $(DBG)miniperl$(E) vmspipe.com @ Continue $(MINIPERL_EXE) : miniperlmain$(O), $(DBG)libperl$(OLB) $(CRTL) Link $(LINKFLAGS)/NoDebug/Trace/NoMap/NoFull/NoCross/Exe=$(MMS$TARGET) miniperlmain$(O), $(DBG)libperl$(OLB)/Library/Include=globals $(CRTLOPTS) @@ -449,6 +467,9 @@ $(ARCHDIR)config.pm : [.lib]config.pm [.lib]config.pm : config.h $(MINIPERL_EXE) $(MINIPERL) ConfigPM. +$(ARCHDIR)vmspipe.com : vmspipe.com + Copy $(MMS$SOURCE) $(MMS$TARGET) + [.ext.dynaloader]dl_vms.c : [.ext.dynaloader]dl_vms.xs $(ARCHDIR)Config.pm [.lib.ExtUtils]XSSymSet.pm $(MINIPERL_EXE) $(XSUBPP) $(MMS$SOURCE) >$(MMS$TARGET) @@ -474,7 +495,7 @@ $(ARCHDIR)config.pm : [.lib]config.pm @ Rename/Log xsloader.pm [.ext.dynaloader] dynext : $(LIBPREREQ) $(DBG)perlshr$(E) - @build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" + @make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" [.lib]vmsish.pm : [.vms.ext]vmsish.pm Copy/Log/NoConfirm $(MMS$SOURCE) $(MMS$TARGET) @@ -879,8 +900,12 @@ perly$(O) : perly.c, perly.h, $(h) [.t.lib]vmsish.t : [.vms.ext]vmsish.t Copy/Log/NoConfirm $(MMS$SOURCE) $(MMS$TARGET) +check : test + @ Continue + test : all [.t.lib]vmsfspec.t [.t.lib]vmsish.t - @[.VMS]Test.Com "$(E)" "$(__DEBUG__)" + @ $(MINIPERL) -e "print ""Ran tests"";" > [.t]rantests. # install ought not need a source, but it doesn't work if one's not # there. Go figure... @@ -1162,6 +1187,25 @@ $(CRTL) : $(MAKEFILE) @ @[.vms]genopt "$(CRTL)/Write" "|" "$(LIBS1)|$(FULLLIBS2)|$(SOCKLIB)" +ok : $(utils) + $(MINIPERL) lib/perlbug.com -ok -s "(UNINSTALLED)" + +okfile : $(utils) + $(MINIPERL) lib/perlbug.com -ok -s "(UNINSTALLED)" "-F" perl.ok + +nok : $(utils) + @ write sys$output " " + @ write sys$output " Please type the command:" + @ write sys$output " " + @ write sys$output "$(MINIPERLQ) lib/perlbug.com -nok -s ""(UNINSTALLED)""" + +nokfile : $(utils) + @ write sys$output " " + @ write sys$output " Please type the command:" + @ write sys$output " " + @ write sys$output "$(MINIPERLQ) lib/perlbug.com -nok -s ""(UNINSTALLED)"" ""-F"" perl.nok" + + cleanlis : - If F$Search("*.Lis").nes."" Then Delete/NoConfirm/Log *.Lis;* - If F$Search("*.CPP").nes."" Then Delete/NoConfirm/Log *.CPP;* @@ -1204,7 +1248,7 @@ tidy : cleanlis - If F$Search("[.lib.pod]*.com;-1").nes."" Then Purge/NoConfirm/Log [.lib.pod]*.com clean : tidy - - @build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" clean + - @make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" clean - If F$Search("*.Opt").nes."" Then Delete/NoConfirm/Log *.Opt;*/Exclude=PerlShr_*.Opt - If F$Search("[...]*$(O);*") .nes."" Then Delete/NoConfirm/Log [...]*$(O);* - If F$Search(F$Parse("Sys$Disk:[]","$(SOCKH)")).nes."" Then Delete/NoConfirm/Log $(SOCKH);* @@ -1229,14 +1273,14 @@ clean : tidy - If F$Search("[.pod]*.com").nes."" Then Delete/NoConfirm/Log [.pod]*.com;* realclean : clean - - @build_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" realclean + - @make_ext "$(dynamic_ext)" "$(MINIPERL_EXE)" "$(MMS)" realclean - If F$Search("*$(OLB)").nes."" Then Delete/NoConfirm/Log *$(OLB);* - If F$Search("*.Opt").nes."" Then Delete/NoConfirm/Log *.Opt;* - If F$Search("Config.H").nes."" Then Delete/NoConfirm/Log Config.H;* - If F$Search("Config.SH").nes."" Then Delete/NoConfirm/Log Config.SH;* - $(MINIPERL) -e "use File::Path; rmtree(\@ARGV,1,0);" config - If F$Search("Descrip.MMS").nes."" Then Delete/NoConfirm/Log Descrip.MMS;* - - If F$Search("Build_Ext.Com").nes."" Then Delete/NoConfirm/Log Build_Ext.Com;* + - If F$Search("make_ext.Com").nes."" Then Delete/NoConfirm/Log make_ext.Com;* - $(MINIPERL) -e "use File::Path; rmtree(['lib/auto','lib/VMS','lib/$(ARCH)'],1,0);" - If F$Search("*.TS").nes."" Then Delete/NoConfirm/Log *.TS;* - If F$Search("[.Lib]DynaLoader.pm").nes."" Then Delete/NoConfirm/Log [.Lib]DynaLoader.pm;* @@ -1256,6 +1300,7 @@ realclean : clean - If F$Search("[.t.lib]vms*.t").nes."" Then Delete/NoConfirm/Log [.t.lib]vms*.t;* - If F$Search("[...]*$(E)").nes."" Then Delete/NoConfirm/Log [...]*$(E);* - If F$Search("[.vms]Perl_Setup.Com").nes."" Then Delete/NoConfirm/Log [.vms]Perl_Setup.Com;* + - If F$Search("[.t]rantests.").nes."" Then Delete/NoConfirm/Log [.t]rantests.;* cleansrc : clean !GROK!THIS! |