diff options
Diffstat (limited to 'vos/config.alpha.h')
| -rw-r--r-- | vos/config.alpha.h | 3242 |
1 files changed, 3242 insertions, 0 deletions
diff --git a/vos/config.alpha.h b/vos/config.alpha.h new file mode 100644 index 0000000000..aaeb129cba --- /dev/null +++ b/vos/config.alpha.h @@ -0,0 +1,3242 @@ +/* + * This file was produced by running the config_h.SH script, which + * gets its values from config.sh, which is generally produced by + * running Configure. + * + * Feel free to modify any of this as the need arises. Note, however, + * that running config_h.SH again will wipe out any changes you've made. + * For a more permanent change edit config.sh and rerun config_h.SH. + * + * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ + */ + +/* + * Package name : perl5 + * Source directory : /vos_ftp_site/pub/vos/posix/(alpha|ga)/perl + * Configuration time: 2000-10-23 18:48 UCT + * Configured by : Paul_Green@stratus.com + * Target system : VOS + */ + +#ifndef _config_h_ +#define _config_h_ + +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. + */ +#define LOC_SED "/system/ported/command_library/sed.pm" /**/ + +/* HAS_ALARM: + * This symbol, if defined, indicates that the alarm routine is + * available. + */ +#define HAS_ALARM /**/ + +/* HASATTRIBUTE: + * This symbol indicates the C compiler can check for function attributes, + * such as printf formats. This is normally only supported by GNU cc. + */ +/*#define HASATTRIBUTE /**/ +#ifndef HASATTRIBUTE +#define __attribute__(_arg_) +#endif + +/* HAS_BCMP: + * This symbol is defined if the bcmp() routine is available to + * compare blocks of memory. + */ +/*#define HAS_BCMP /**/ + +/* HAS_BCOPY: + * This symbol is defined if the bcopy() routine is available to + * copy blocks of memory. + */ +/*#define HAS_BCOPY /**/ + +/* HAS_BZERO: + * This symbol is defined if the bzero() routine is available to + * set a memory block to 0. + */ +/*#define HAS_BZERO /**/ + +/* HAS_CHOWN: + * This symbol, if defined, indicates that the chown routine is + * available. + */ +/*#define HAS_CHOWN /**/ + +/* HAS_CHROOT: + * This symbol, if defined, indicates that the chroot routine is + * available. + */ +/*#define HAS_CHROOT /**/ + +/* HAS_CHSIZE: + * This symbol, if defined, indicates that the chsize routine is available + * to truncate files. You might need a -lx to get this routine. + */ +/*#define HAS_CHSIZE /**/ + +/* HASCONST: + * This symbol, if defined, indicates that this C compiler knows about + * the const type. There is no need to actually test for that symbol + * within your programs. The mere use of the "const" keyword will + * trigger the necessary tests. + */ +#define HASCONST /**/ +#ifndef HASCONST +#define const +#endif + +/* HAS_CRYPT: + * This symbol, if defined, indicates that the crypt routine is available + * to encrypt passwords and the like. + */ +/*#define HAS_CRYPT /**/ + +/* HAS_CUSERID: + * This symbol, if defined, indicates that the cuserid routine is + * available to get character login names. + */ +/*#define HAS_CUSERID /**/ + +/* HAS_DBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol DBL_DIG, which is the number + * of significant digits in a double precision number. If this + * symbol is not defined, a guess of 15 is usually pretty good. + */ +#define HAS_DBL_DIG /* */ + +/* HAS_DIFFTIME: + * This symbol, if defined, indicates that the difftime routine is + * available. + */ +#define HAS_DIFFTIME /**/ + +/* HAS_DLERROR: + * This symbol, if defined, indicates that the dlerror routine is + * available to return a string describing the last error that + * occurred from a call to dlopen(), dlclose() or dlsym(). + */ +/*#define HAS_DLERROR /**/ + +/* SETUID_SCRIPTS_ARE_SECURE_NOW: + * This symbol, if defined, indicates that the bug that prevents + * setuid scripts from being secure is not present in this kernel. + */ +/* DOSUID: + * This symbol, if defined, indicates that the C program should + * check the script that it is executing for setuid/setgid bits, and + * attempt to emulate setuid/setgid on systems that have disabled + * setuid #! scripts because the kernel can't do it securely. + * It is up to the package designer to make sure that this emulation + * is done securely. Among other things, it should do an fstat on + * the script it just opened to make sure it really is a setuid/setgid + * script, it should make sure the arguments passed correspond exactly + * to the argument on the #! line, and it should not trust any + * subprocesses to which it must pass the filename rather than the + * file descriptor of the script to be executed. + */ +#define SETUID_SCRIPTS_ARE_SECURE_NOW /**/ +/*#define DOSUID /**/ + +/* HAS_DUP2: + * This symbol, if defined, indicates that the dup2 routine is + * available to duplicate file descriptors. + */ +/*#define HAS_DUP2 /**/ + +/* HAS_FCHMOD: + * This symbol, if defined, indicates that the fchmod routine is available + * to change mode of opened files. If unavailable, use chmod(). + */ +#define HAS_FCHMOD /**/ + +/* HAS_FCHOWN: + * This symbol, if defined, indicates that the fchown routine is available + * to change ownership of opened files. If unavailable, use chown(). + */ +/*#define HAS_FCHOWN /**/ + +/* HAS_FCNTL: + * This symbol, if defined, indicates to the C program that + * the fcntl() function exists. + */ +#define HAS_FCNTL /**/ + +/* HAS__FWALK: + * This symbol, if defined, indicates that the _fwalk system call is + * available to apply a function to all the file handles. + */ +/*#define HAS__FWALK / **/ + +/* FCNTL_CAN_LOCK: + * This symbol, if defined, indicates that fcntl() can be used + * for file locking. Normally on Unix systems this is defined. + * It may be undefined on VMS. + */ +#define FCNTL_CAN_LOCK /**/ + +/* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). + */ +#define HAS_FGETPOS /**/ + +/* HAS_FLOCK: + * This symbol, if defined, indicates that the flock routine is + * available to do file locking. + */ +/*#define HAS_FLOCK /**/ + +/* HAS_FORK: + * This symbol, if defined, indicates that the fork routine is + * available. + */ +/*#define HAS_FORK /**/ + +/* HAS_FSETPOS: + * This symbol, if defined, indicates that the fsetpos routine is + * available to set the file position indicator, similar to fseek(). + */ +#define HAS_FSETPOS /**/ + +/* HAS_GETTIMEOFDAY: + * This symbol, if defined, indicates that the gettimeofday() system + * call is available for a sub-second accuracy clock. Usually, the file + * <sys/resource.h> needs to be included (see I_SYS_RESOURCE). + * The type "Timeval" should be used to refer to "struct timeval". + */ +/*#define HAS_GETTIMEOFDAY /**/ +#ifdef HAS_GETTIMEOFDAY +#define Timeval struct timeval /* Structure used by gettimeofday() */ +#endif + +/* HAS_GETGROUPS: + * This symbol, if defined, indicates that the getgroups() routine is + * available to get the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_GETGROUPS /**/ + +/* HAS_GETLOGIN: + * This symbol, if defined, indicates that the getlogin routine is + * available to get the login name. + */ +#define HAS_GETLOGIN /**/ + +/* HAS_GETPAGESIZE: + * This symbol, if defined, indicates that the getpagesize system call + * is available to get system page size, which is the granularity of + * many memory management calls. + */ +/*#define HAS_GETPAGESIZE /**/ + +/* HAS_GETPGID: + * This symbol, if defined, indicates to the C program that + * the getpgid(pid) function is available to get the + * process group id. + */ +/*#define HAS_GETPGID /**/ + +/* HAS_GETPGRP2: + * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) + * routine is available to get the current process group. + */ +/*#define HAS_GETPGRP2 /**/ + +/* HAS_GETPPID: + * This symbol, if defined, indicates that the getppid routine is + * available to get the parent process ID. + */ +#define HAS_GETPPID /**/ + +/* HAS_GETPRIORITY: + * This symbol, if defined, indicates that the getpriority routine is + * available to get a process's priority. + */ +/*#define HAS_GETPRIORITY /**/ + +/* HAS_INET_ATON: + * This symbol, if defined, indicates to the C program that the + * inet_aton() function is available to parse IP address "dotted-quad" + * strings. + */ +/*#define HAS_INET_ATON /**/ + +/* HAS_KILLPG: + * This symbol, if defined, indicates that the killpg routine is available + * to kill process groups. If unavailable, you probably should use kill + * with a negative process number. + */ +/*#define HAS_KILLPG /**/ + +/* HAS_LINK: + * This symbol, if defined, indicates that the link routine is + * available to create hard links. + */ +/*#define HAS_LINK /**/ + +/* HAS_LOCALECONV: + * This symbol, if defined, indicates that the localeconv routine is + * available for numeric and monetary formatting conventions. + */ +#define HAS_LOCALECONV /**/ + +/* HAS_LOCKF: + * This symbol, if defined, indicates that the lockf routine is + * available to do file locking. + */ +#define HAS_LOCKF /**/ + +/* HAS_LSTAT: + * This symbol, if defined, indicates that the lstat routine is + * available to do file stats on symbolic links. + */ +#define HAS_LSTAT /**/ + +/* HAS_MBLEN: + * This symbol, if defined, indicates that the mblen routine is available + * to find the number of bytes in a multibye character. + */ +#define HAS_MBLEN /**/ + +/* HAS_MBSTOWCS: + * This symbol, if defined, indicates that the mbstowcs routine is + * available to covert a multibyte string into a wide character string. + */ +#define HAS_MBSTOWCS /**/ + +/* HAS_MBTOWC: + * This symbol, if defined, indicates that the mbtowc routine is available + * to covert a multibyte to a wide character. + */ +#define HAS_MBTOWC /**/ + +/* HAS_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * to compare blocks of memory. + */ +#define HAS_MEMCMP /**/ + +/* HAS_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy blocks of memory. + */ +#define HAS_MEMCPY /**/ + +/* HAS_MEMMOVE: + * This symbol, if defined, indicates that the memmove routine is available + * to copy potentially overlapping blocks of memory. This should be used + * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your + * own version. + */ +#define HAS_MEMMOVE /**/ + +/* HAS_MEMSET: + * This symbol, if defined, indicates that the memset routine is available + * to set blocks of memory. + */ +#define HAS_MEMSET /**/ + +/* HAS_MKDIR: + * This symbol, if defined, indicates that the mkdir routine is available + * to create directories. Otherwise you should fork off a new process to + * exec /bin/mkdir. + */ +#define HAS_MKDIR /**/ + +/* HAS_MKFIFO: + * This symbol, if defined, indicates that the mkfifo routine is + * available to create FIFOs. Otherwise, mknod should be able to + * do it for you. However, if mkfifo is there, mknod might require + * super-user privileges which mkfifo will not. + */ +#define HAS_MKFIFO /**/ + +/* HAS_MKTIME: + * This symbol, if defined, indicates that the mktime routine is + * available. + */ +#define HAS_MKTIME /**/ + +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. + */ +/*#define HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +/*#define HAS_MUNMAP /**/ + +/* HAS_NICE: + * This symbol, if defined, indicates that the nice routine is + * available. + */ +/*#define HAS_NICE /**/ + +/* HAS_PATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given filename. + */ +/* HAS_FPATHCONF: + * This symbol, if defined, indicates that pathconf() is available + * to determine file-system related limits and options associated + * with a given open file descriptor. + */ +#define HAS_PATHCONF /**/ +#define HAS_FPATHCONF /**/ + +/* HAS_PAUSE: + * This symbol, if defined, indicates that the pause routine is + * available to suspend a process until a signal is received. + */ +#define HAS_PAUSE /**/ + +/* HAS_PIPE: + * This symbol, if defined, indicates that the pipe routine is + * available to create an inter-process channel. + */ +#define HAS_PIPE /**/ + +/* HAS_POLL: + * This symbol, if defined, indicates that the poll routine is + * available to poll active file descriptors. You may safely + * include <poll.h> when this symbol is defined. + */ +#define HAS_POLL /**/ + +/* HAS_READDIR: + * This symbol, if defined, indicates that the readdir routine is + * available to read directory entries. You may have to include + * <dirent.h>. See I_DIRENT. + */ +#define HAS_READDIR /**/ + +/* HAS_SEEKDIR: + * This symbol, if defined, indicates that the seekdir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +/*#define HAS_SEEKDIR /**/ + +/* HAS_TELLDIR: + * This symbol, if defined, indicates that the telldir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +/*#define HAS_TELLDIR /**/ + +/* HAS_REWINDDIR: + * This symbol, if defined, indicates that the rewinddir routine is + * available. You may have to include <dirent.h>. See I_DIRENT. + */ +#define HAS_REWINDDIR /**/ + +/* HAS_READLINK: + * This symbol, if defined, indicates that the readlink routine is + * available to read the value of a symbolic link. + */ +#define HAS_READLINK /**/ + +/* HAS_RENAME: + * This symbol, if defined, indicates that the rename routine is available + * to rename files. Otherwise you should do the unlink(), link(), unlink() + * trick. + */ +#define HAS_RENAME /**/ + +/* HAS_RMDIR: + * This symbol, if defined, indicates that the rmdir routine is + * available to remove directories. Otherwise you should fork off a + * new process to exec /bin/rmdir. + */ +#define HAS_RMDIR /**/ + +/* HAS_SELECT: + * This symbol, if defined, indicates that the select routine is + * available to select active file descriptors. If the timeout field + * is used, <sys/time.h> may need to be included. + */ +#define HAS_SELECT /**/ + +/* HAS_SETEGID: + * This symbol, if defined, indicates that the setegid routine is available + * to change the effective gid of the current program. + */ +/*#define HAS_SETEGID /**/ + +/* HAS_SETEUID: + * This symbol, if defined, indicates that the seteuid routine is available + * to change the effective uid of the current program. + */ +/*#define HAS_SETEUID /**/ + +/* HAS_SETLINEBUF: + * This symbol, if defined, indicates that the setlinebuf routine is + * available to change stderr or stdout from block-buffered or unbuffered + * to a line-buffered mode. + */ +/*#define HAS_SETLINEBUF /**/ + +/* HAS_SETLOCALE: + * This symbol, if defined, indicates that the setlocale routine is + * available to handle locale-specific ctype implementations. + */ +#define HAS_SETLOCALE /**/ + +/* HAS_SETPGID: + * This symbol, if defined, indicates that the setpgid(pid, gpid) + * routine is available to set process group ID. + */ +/*#define HAS_SETPGID /**/ + +/* HAS_SETPGRP2: + * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) + * routine is available to set the current process group. + */ +/*#define HAS_SETPGRP2 /**/ + +/* HAS_SETPRIORITY: + * This symbol, if defined, indicates that the setpriority routine is + * available to set a process's priority. + */ +/*#define HAS_SETPRIORITY /**/ + +/* HAS_SETREGID: + * This symbol, if defined, indicates that the setregid routine is + * available to change the real and effective gid of the current + * process. + */ +/* HAS_SETRESGID: + * This symbol, if defined, indicates that the setresgid routine is + * available to change the real, effective and saved gid of the current + * process. + */ +/*#define HAS_SETREGID /**/ +/*#define HAS_SETRESGID /**/ + +/* HAS_SETREUID: + * This symbol, if defined, indicates that the setreuid routine is + * available to change the real and effective uid of the current + * process. + */ +/* HAS_SETRESUID: + * This symbol, if defined, indicates that the setresuid routine is + * available to change the real, effective and saved uid of the current + * process. + */ +/*#define HAS_SETREUID /**/ +/*#define HAS_SETRESUID /**/ + +/* HAS_SETRGID: + * This symbol, if defined, indicates that the setrgid routine is available + * to change the real gid of the current program. + */ +/*#define HAS_SETRGID /**/ + +/* HAS_SETRUID: + * This symbol, if defined, indicates that the setruid routine is available + * to change the real uid of the current program. + */ +/*#define HAS_SETRUID /**/ + +/* HAS_SETSID: + * This symbol, if defined, indicates that the setsid routine is + * available to set the process group ID. + */ +/*#define HAS_SETSID /**/ + +/* Shmat_t: + * This symbol holds the return type of the shmat() system call. + * Usually set to 'void *' or 'char *'. + */ +/* HAS_SHMAT_PROTOTYPE: + * This symbol, if defined, indicates that the sys/shm.h includes + * a prototype for shmat(). Otherwise, it is up to the program to + * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, + * but not always right so it should be emitted by the program only + * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. + */ +#define Shmat_t void * /**/ +#define HAS_SHMAT_PROTOTYPE /**/ + +/* HAS_STRCHR: + * This symbol is defined to indicate that the strchr()/strrchr() + * functions are available for string searching. If not, try the + * index()/rindex() pair. + */ +/* HAS_INDEX: + * This symbol is defined to indicate that the index()/rindex() + * functions are available for string searching. + */ +#define HAS_STRCHR /**/ +/*#define HAS_INDEX /**/ + +/* HAS_STRCOLL: + * This symbol, if defined, indicates that the strcoll routine is + * available to compare strings using collating information. + */ +#define HAS_STRCOLL /**/ + +/* USE_STRUCT_COPY: + * This symbol, if defined, indicates that this C compiler knows how + * to copy structures. If undefined, you'll need to use a block copy + * routine of some sort instead. + */ +#define USE_STRUCT_COPY /**/ + +/* HAS_STRTOD: + * This symbol, if defined, indicates that the strtod routine is + * available to provide better numeric string conversion than atof(). + */ +#define HAS_STRTOD /**/ + +/* HAS_STRTOL: + * This symbol, if defined, indicates that the strtol routine is available + * to provide better numeric string conversion than atoi() and friends. + */ +#define HAS_STRTOL /**/ + +/* HAS_STRTOUL: + * This symbol, if defined, indicates that the strtoul routine is + * available to provide conversion of strings to unsigned long. + */ +#define HAS_STRTOUL /**/ + +/* HAS_STRXFRM: + * This symbol, if defined, indicates that the strxfrm() routine is + * available to transform strings. + */ +#define HAS_STRXFRM /**/ + +/* HAS_SYMLINK: + * This symbol, if defined, indicates that the symlink routine is available + * to create symbolic links. + */ +#define HAS_SYMLINK /**/ + +/* HAS_SYSCALL: + * This symbol, if defined, indicates that the syscall routine is + * available to call arbitrary system calls. If undefined, that's tough. + */ +/*#define HAS_SYSCALL /**/ + +/* HAS_SYSCONF: + * This symbol, if defined, indicates that sysconf() is available + * to determine system related limits and options. + */ +#define HAS_SYSCONF /**/ + +/* HAS_SYSTEM: + * This symbol, if defined, indicates that the system routine is + * available to issue a shell command. + */ +#define HAS_SYSTEM /**/ + +/* HAS_TCGETPGRP: + * This symbol, if defined, indicates that the tcgetpgrp routine is + * available to get foreground process group ID. + */ +/*#define HAS_TCGETPGRP /**/ + +/* HAS_TCSETPGRP: + * This symbol, if defined, indicates that the tcsetpgrp routine is + * available to set foreground process group ID. + */ +/*#define HAS_TCSETPGRP /**/ + +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. + */ +/*#define HAS_TRUNCATE /**/ + +/* HAS_TZNAME: + * This symbol, if defined, indicates that the tzname[] array is + * available to access timezone names. + */ +#define HAS_TZNAME /**/ + +/* HAS_UMASK: + * This symbol, if defined, indicates that the umask routine is + * available to set and get the value of the file creation mask. + */ +#define HAS_UMASK /**/ + +/* HASVOLATILE: + * This symbol, if defined, indicates that this C compiler knows about + * the volatile declaration. + */ +#define HASVOLATILE /**/ +#ifndef HASVOLATILE +#define volatile +#endif + +/* HAS_WAIT4: + * This symbol, if defined, indicates that wait4() exists. + */ +/*#define HAS_WAIT4 /**/ + +/* HAS_WAITPID: + * This symbol, if defined, indicates that the waitpid routine is + * available to wait for child process. + */ +#define HAS_WAITPID /**/ + +/* HAS_WCSTOMBS: + * This symbol, if defined, indicates that the wcstombs routine is + * available to convert wide character strings to multibyte strings. + */ +#define HAS_WCSTOMBS /**/ + +/* HAS_WCTOMB: + * This symbol, if defined, indicates that the wctomb routine is available + * to covert a wide character to a multibyte. + */ +#define HAS_WCTOMB /**/ + +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include <arpa/inet.h> to get inet_addr and friends declarations. + */ +#define I_ARPA_INET /**/ + +/* I_DBM: + * This symbol, if defined, indicates that <dbm.h> exists and should + * be included. + */ +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that <rpcsvc/dbm.h> exists and + * should be included. + */ +/*#define I_DBM /**/ +/*#define I_RPCSVC_DBM /**/ + +/* I_DIRENT: + * This symbol, if defined, indicates to the C program that it should + * include <dirent.h>. Using this symbol also triggers the definition + * of the Direntry_t define which ends up being 'struct dirent' or + * 'struct direct' depending on the availability of <dirent.h>. + */ +/* DIRNAMLEN: + * This symbol, if defined, indicates to the C program that the length + * of directory entry names is provided by a d_namlen field. Otherwise + * you need to do strlen() on the d_name field. + */ +/* Direntry_t: + * This symbol is set to 'struct direct' or 'struct dirent' depending on + * whether dirent is available or not. You should use this pseudo type to + * portably declare your directory entries. + */ +#define I_DIRENT /**/ +/*#define DIRNAMLEN /**/ +#define Direntry_t struct dirent + +/* I_DLFCN: + * This symbol, if defined, indicates that <dlfcn.h> exists and should + * be included. + */ +/*#define I_DLFCN /**/ + +/* I_FCNTL: + * This manifest constant tells the C program to include <fcntl.h>. + */ +#define I_FCNTL /**/ + +/* I_FLOAT: + * This symbol, if defined, indicates to the C program that it should + * include <float.h> to get definition of symbols like DBL_MAX or + * DBL_MIN, i.e. machine dependent floating point values. + */ +#define I_FLOAT /**/ + +/* I_LIMITS: + * This symbol, if defined, indicates to the C program that it should + * include <limits.h> to get definition of symbols like WORD_BIT or + * LONG_MAX, i.e. machine dependant limitations. + */ +#define I_LIMITS /**/ + +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include <locale.h>. + */ +#define I_LOCALE /**/ + +/* I_MATH: + * This symbol, if defined, indicates to the C program that it should + * include <math.h>. + */ +#define I_MATH /**/ + +/* I_MEMORY: + * This symbol, if defined, indicates to the C program that it should + * include <memory.h>. + */ +/*#define I_MEMORY /**/ + +/* I_NDBM: + * This symbol, if defined, indicates that <ndbm.h> exists and should + * be included. + */ +/*#define I_NDBM /**/ + +/* I_NET_ERRNO: + * This symbol, if defined, indicates that <net/errno.h> exists and + * should be included. + */ +/*#define I_NET_ERRNO /**/ + +/* I_NETINET_IN: + * This symbol, if defined, indicates to the C program that it should + * include <netinet/in.h>. Otherwise, you may try <sys/in.h>. + */ +#define I_NETINET_IN /**/ + +/* I_SFIO: + * This symbol, if defined, indicates to the C program that it should + * include <sfio.h>. + */ +/*#define I_SFIO /**/ + +/* I_STDDEF: + * This symbol, if defined, indicates that <stddef.h> exists and should + * be included. + */ +#define I_STDDEF /**/ + +/* I_STDLIB: + * This symbol, if defined, indicates that <stdlib.h> exists and should + * be included. + */ +#define I_STDLIB /**/ + +/* I_STRING: + * This symbol, if defined, indicates to the C program that it should + * include <string.h> (USG systems) instead of <strings.h> (BSD systems). + */ +#define I_STRING /**/ + +/* I_SYS_DIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/dir.h>. + */ +/*#define I_SYS_DIR /**/ + +/* I_SYS_FILE: + * This symbol, if defined, indicates to the C program that it should + * include <sys/file.h> to get definition of R_OK and friends. + */ +/*#define I_SYS_FILE /**/ + +/* I_SYS_IOCTL: + * This symbol, if defined, indicates that <sys/ioctl.h> exists and should + * be included. Otherwise, include <sgtty.h> or <termio.h>. + */ +#define I_SYS_IOCTL /**/ + +/* I_SYS_NDIR: + * This symbol, if defined, indicates to the C program that it should + * include <sys/ndir.h>. + */ +/*#define I_SYS_NDIR /**/ + +/* I_SYS_PARAM: + * This symbol, if defined, indicates to the C program that it should + * include <sys/param.h>. + */ +/*#define I_SYS_PARAM /**/ + +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include <sys/resource.h>. + */ +/*#define I_SYS_RESOURCE /**/ + +/* I_SYS_SELECT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/select.h> in order to get definition of struct timeval. + */ +#define I_SYS_SELECT /**/ + +/* I_SYS_STAT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/stat.h>. + */ +#define I_SYS_STAT /**/ + +/* I_SYS_TIMES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/times.h>. + */ +#define I_SYS_TIMES /**/ + +/* I_SYS_TYPES: + * This symbol, if defined, indicates to the C program that it should + * include <sys/types.h>. + */ +#define I_SYS_TYPES /**/ + +/* I_SYS_UN: + * This symbol, if defined, indicates to the C program that it should + * include <sys/un.h> to get UNIX domain socket definitions. + */ +/*#define I_SYS_UN /**/ + +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include <sys/wait.h>. + */ +#define I_SYS_WAIT /**/ + +/* I_TERMIO: + * This symbol, if defined, indicates that the program should include + * <termio.h> rather than <sgtty.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/* I_TERMIOS: + * This symbol, if defined, indicates that the program should include + * the POSIX termios.h rather than sgtty.h or termio.h. + * There are also differences in the ioctl() calls that depend on the + * value of this symbol. + */ +/* I_SGTTY: + * This symbol, if defined, indicates that the program should include + * <sgtty.h> rather than <termio.h>. There are also differences in + * the ioctl() calls that depend on the value of this symbol. + */ +/*#define I_TERMIO /**/ +#define I_TERMIOS /**/ +/*#define I_SGTTY /**/ + +/* I_UNISTD: + * This symbol, if defined, indicates to the C program that it should + * include <unistd.h>. + */ +#define I_UNISTD /**/ + +/* I_UTIME: + * This symbol, if defined, indicates to the C program that it should + * include <utime.h>. + */ +#define I_UTIME /**/ + +/* I_VALUES: + * This symbol, if defined, indicates to the C program that it should + * include <values.h> to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use <limits.h> instead, if it is available. + */ +#define I_VALUES /**/ + +/* I_STDARG: + * This symbol, if defined, indicates that <stdarg.h> exists and should + * be included. + */ +/* I_VARARGS: + * This symbol, if defined, indicates to the C program that it should + * include <varargs.h>. + */ +#define I_STDARG /**/ +/*#define I_VARARGS /**/ + +/* I_VFORK: + * This symbol, if defined, indicates to the C program that it should + * include vfork.h. + */ +/*#define I_VFORK /**/ + +/* CAN_PROTOTYPE: + * If defined, this macro indicates that the C compiler can handle + * function prototypes. + */ +/* _: + * This macro is used to declare function parameters for folks who want + * to make declarations with prototypes using a different style than + * the above macros. Use double parentheses. For example: + * + * int main _((int argc, char *argv[])); + */ +#define CAN_PROTOTYPE /**/ +#ifdef CAN_PROTOTYPE +#define _(args) args +#else +#define _(args) () +#endif + +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as + * D:/bin/sh.exe. + */ +#define SH_PATH "/bin/sh" /**/ + +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". + */ +#define STDCHAR unsigned char /**/ + +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. + */ +/*#define CROSSCOMPILE /**/ + +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. + */ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE 4 /**/ +#define LONGSIZE 4 /**/ +#define SHORTSIZE 2 /**/ + +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. + */ +/*#define MULTIARCH /**/ + +/* HAS_QUAD: + * This symbol, if defined, tells that there's a 64-bit integer type, + * Quad_t, and its unsigned counterpar, Uquad_t. QUADKIND will be one + * of QUAD_IS_INT, QUAD_IS_LONG, QUAD_IS_LONG_LONG, or QUAD_IS_INT64_T. + */ +/*#define HAS_QUAD /**/ +#ifdef HAS_QUAD +# define Quad_t _error_ /**/ +# define Uquad_t _error_ /**/ +# define QUADKIND _error_ /**/ +# define QUAD_IS_INT 1 +# define QUAD_IS_LONG 2 +# define QUAD_IS_LONG_LONG 3 +# define QUAD_IS_INT64_T 4 +#endif + +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. + */ +/*#define HAS_ACCESSX /**/ + +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. + */ +/*#define HAS_EACCESS /**/ + +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include <sys/access.h>. + */ +/*#define I_SYS_ACCESS /**/ + +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include <sys/security.h>. + */ +/*#define I_SYS_SECURITY /**/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "VOS" /**/ + +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double, or a long double when applicable. Usual values are 2, + * 4 and 8. The default is eight, for safety. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES 8 +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for perl5. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/*#define ARCHLIB "" /**/ +/*#define ARCHLIB_EXP "" /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "vos" /**/ + +/* HAS_ATOLF: + * This symbol, if defined, indicates that the atolf routine is + * available to convert strings into long doubles. + */ +/*#define HAS_ATOLF /**/ + +/* HAS_ATOLL: + * This symbol, if defined, indicates that the atoll routine is + * available to convert strings into long longs. + */ +/*#define HAS_ATOLL /**/ + +/* BIN: + * This symbol holds the path of the bin directory where the package will + * be installed. Program must be prepared to deal with ~name substitution. + */ +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. + */ +#define BIN "/system/ported/command_library" /**/ +#define BIN_EXP "/system/ported/command_library" /**/ + +/* PERL_BINCOMPAT_5005: + * This symbol, if defined, indicates that this version of Perl should be + * binary-compatible with Perl 5.005. This is impossible for builds + * that use features like threads and multiplicity it is always $undef + * for those versions. + */ +/*#define PERL_BINCOMPAT_5005 /**/ + +/* BYTEORDER: + * This symbol holds the hexadecimal constant defined in byteorder, + * i.e. 0x1234 or 0x4321, etc... + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. + * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture + * Binaries (MAB) on either big endian or little endian machines. + * The endian-ness is available at compile-time. This only matters + * for perl, where the config.h can be generated and installed on + * one system, and used by a different architecture to build an + * extension. Older versions of NeXT that might not have + * defined either *_ENDIAN__ were all on Motorola 680x0 series, + * so the default case (for NeXT) is big endian to catch them. + * This might matter for NeXT 3.0. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else +#define BYTEORDER 0x4321 /* large digits for MSB */ +#endif /* NeXT */ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if 42 == 1 +#define CAT2(a,b) a/**/b +#define STRINGIFY(a) "a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if 42 == 42 +#define PeRl_CaTiFy(a, b) a ## b +#define PeRl_StGiFy(a) #a +/* the additional level of indirection enables these macros to be + * used as arguments to other macros. See K&R 2nd ed., page 231. */ +#define CAT2(a,b) PeRl_CaTiFy(a,b) +#define StGiFy(a) PeRl_StGiFy(a) +#define STRINGIFY(a) PeRl_StGiFy(a) +#endif +#if 42 != 1 && 42 != 42 +# include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +/* CPPLAST: + * This symbol is intended to be used along with CPPRUN in the same manner + * symbol CPPMINUS is used with CPPSTDIN. It contains either "-" or "". + */ +#define CPPSTDIN "cc -E" +#define CPPMINUS "-" +#define CPPRUN "cc -E -" +#define CPPLAST "-" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +/*#define HAS_ACCESS /**/ + +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. + */ +/*#define CASTI32 /**/ + +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +#define CASTNEGFLOAT /**/ +#define CASTFLAGS 0 /**/ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +/*#define VOID_CLOSEDIR /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +/*#define HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "" /**/ +#endif + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +/*#define DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 _((void)); + */ +/*#define HAS_DRAND48_PROTO /**/ + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +/*#define HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#define HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#define HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#define HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +/*#define HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#define HAS_ENDSERVENT /**/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in <sys/types.h> + */ +/*#define HAS_FD_SET /**/ + +/* FLEXFILENAMES: + * This symbol, if defined, indicates that the system supports filenames + * longer than 14 characters. + */ +#define FLEXFILENAMES /**/ + +/* HAS_FPOS64_T: + * This symbol will be defined if the C compiler supports fpos64_t. + */ +/*#define HAS_FPOS64_T /**/ + +/* HAS_FREXPL: + * This symbol, if defined, indicates that the frexpl routine is + * available to break a long double floating-point number into + * a normalized fraction and an integral power of 2. + */ +/*#define HAS_FREXPL /**/ + +/* HAS_STRUCT_FS_DATA: + * This symbol, if defined, indicates that the struct fs_data + * to do statfs() is supported. + */ +/*#define HAS_STRUCT_FS_DATA /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FSEEKO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems by file descriptors. + */ +/*#define HAS_FSTATFS /**/ + +/* HAS_FSYNC: + * This symbol, if defined, indicates that the fsync routine is + * available to write a file's modified data and attributes to + * permanent storage. + */ +/*#define HAS_FSYNC /**/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell beyond 32 bits (useful for ILP32 hosts). + */ +/*#define HAS_FTELLO /**/ + +/* Gconvert: + * This preprocessor macro is defined to convert a floating point + * number to a string without a trailing decimal point. This + * emulates the behavior of sprintf("%g"), but is sometimes much more + * efficient. If gconvert() is not available, but gcvt() drops the + * trailing decimal point, then gcvt() is used. If all else fails, + * a macro using sprintf("%g") is used. Arguments for the Gconvert + * macro are: value, number of digits, whether trailing zeros should + * be retained, and the output buffer. + * Possible values are: + * d_Gconvert='gconvert((x),(n),(t),(b))' + * d_Gconvert='gcvt((x),(n),(b))' + * d_Gconvert='sprintf((b),"%.*g",(n),(x))' + * The last two assume trailing zeros should not be kept. + */ +#define Gconvert(x,n,t,b) sprintf((b),"%.*g",(n),(x)) + +/* HAS_GETCWD: + * This symbol, if defined, indicates that the getcwd routine is + * available to get the current working directory. + */ +#define HAS_GETCWD /**/ + +/* HAS_GETESPWNAM: + * This symbol, if defined, indicates that the getespwnam system call is + * available to retrieve enchanced (shadow) password entries by name. + */ +/*#define HAS_GETESPWNAM /**/ + +/* HAS_GETFSSTAT: + * This symbol, if defined, indicates that the getfsstat routine is + * available to stat filesystems in bulk. + */ +/*#define HAS_GETFSSTAT /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +/*#define HAS_GETGRENT /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#define HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#define HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +#define HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +/* HAS_PHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * contents of PHOSTNAME as a command to feed to the popen() routine + * to derive the host name. + */ +#define HAS_GETHOSTNAME /**/ +#define HAS_UNAME /**/ +/*#define HAS_PHOSTNAME /**/ +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "" /* How to get the host name */ +#endif + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETHOST_PROTOS /**/ + +/* HAS_GETMNT: + * This symbol, if defined, indicates that the getmnt routine is + * available to get filesystem mount info by filename. + */ +/*#define HAS_GETMNT /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems to get their info. + */ +/*#define HAS_GETMNTENT /**/ + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +#define HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +#define HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +#define HAS_GETNETENT /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETNET_PROTOS /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +#define HAS_GETPROTOENT /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#define HAS_GETPROTOBYNAME /**/ +#define HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETPRPWNAM: + * This symbol, if defined, indicates that the getprpwnam system call is + * available to retrieve protected (shadow) password entries by name. + */ +/*#define HAS_GETPRPWNAM /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +/*#define HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +#define HAS_GETSERVENT /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that <netdb.h> includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#define HAS_GETSERV_PROTOS /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +/*#define HAS_GETSPNAM /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +#define HAS_GETSERVBYNAME /**/ +#define HAS_GETSERVBYPORT /**/ + +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. + */ +/*#define HAS_GNULIBC /**/ +#if defined(HAS_GNULIBC) && !defined(_GNU_SOURCE) +# define _GNU_SOURCE +#endif +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +/*#define HAS_HASMNTOPT /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#define HAS_HTONL /**/ +#define HAS_HTONS /**/ +#define HAS_NTOHL /**/ +#define HAS_NTOHS /**/ + +/* HAS_ICONV: + * This symbol, if defined, indicates that the iconv routine is + * available to do character set conversions. + */ +/*#define HAS_ICONV /**/ + +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the <inttypes.h> needs to be included, but sometimes + * <sys/types.h> is enough. + */ +/*#define HAS_INT64_T /**/ + +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#define HAS_ISASCII /**/ + +/* HAS_ISNAN: + * This symbol, if defined, indicates that the isnan routine is + * available to check whether a double is a NaN. + */ +/*#define HAS_ISNAN /**/ + +/* HAS_ISNANL: + * This symbol, if defined, indicates that the isnanl routine is + * available to check whether a long double is a NaN. + */ +/*#define HAS_ISNANL /**/ + +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). + */ +/*#define HAS_LCHOWN /**/ + +/* HAS_LDBL_DIG: + * This symbol, if defined, indicates that this system's <float.h> + * or <limits.h> defines the symbol LDBL_DIG, which is the number + * of significant digits in a long double precision number. Unlike + * for DBL_DIG, there's no good guess for LDBL_DIG if it is undefined. + */ +#define HAS_LDBL_DIG /* */ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +#define HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE 8 /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +/*#define HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE _error_ /**/ +#endif + +/* HAS_LSEEK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the lseek() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern off_t lseek(int, off_t, int); + */ +#define HAS_LSEEK_PROTO /**/ + +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +/*#define HAS_MADVISE /**/ + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#define HAS_MEMCHR /**/ + +/* HAS_MKDTEMP: + * This symbol, if defined, indicates that the mkdtemp routine is + * available to exclusively create a uniquely named temporary directory. + */ +/*#define HAS_MKDTEMP /**/ + +/* HAS_MKSTEMP: + * This symbol, if defined, indicates that the mkstemp routine is + * available to exclusively create and open a uniquely named + * temporary file. + */ +/*#define HAS_MKSTEMP /**/ + +/* HAS_MKSTEMPS: + * This symbol, if defined, indicates that the mkstemps routine is + * available to excluslvely create and open a uniquely named + * (with a suffix) temporary file. + */ +/*#define HAS_MKSTEMPS /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +/*#define HAS_MMAP /**/ +#define Mmap_t void * /**/ + +/* HAS_MODFL: + * This symbol, if defined, indicates that the modfl routine is + * available to split a long double x into a fractional part f and + * an integer part i such that |f| < 1.0 and (f + i) = x. + */ +/*#define HAS_MODFL /**/ + +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +/*#define HAS_MPROTECT /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +/*#define HAS_MSG /**/ + +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/*#define HAS_OFF64_T /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. + */ +#define HAS_OPEN3 /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +/*#define OLD_PTHREAD_CREATE_JOINABLE /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/*#define HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD /**/ +/*#define HAS_SCHED_YIELD /**/ + +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +/*#define HAS_SAFE_BCOPY /**/ + +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. + */ +/*#define HAS_SAFE_MEMCPY /**/ + +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. + */ +#define HAS_SANE_MEMCMP /**/ + +/* HAS_SBRK_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the sbrk() function. Otherwise, it is up + * to the program to supply one. Good guesses are + * extern void* sbrk _((int)); + * extern void* sbrk _((size_t)); + */ +/*#define HAS_SBRK_PROTO / **/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +/*#define HAS_SEM /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +/*#define HAS_SETGRENT /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +/*#define HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +#define HAS_SETHOSTENT /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +#define HAS_SETNETENT /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +#define HAS_SETPROTOENT /**/ + +/* HAS_SETPROCTITLE: + * This symbol, if defined, indicates that the setproctitle routine is + * available to set process title. + */ +/*#define HAS_SETPROCTITLE /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +/*#define HAS_SETPWENT /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +#define HAS_SETSERVENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#define HAS_SETVBUF /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +/*#define USE_SFIO /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +/*#define HAS_SHM /**/ + +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. + */ +/*#define HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +/*#define HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +#define HAS_SOCKET /**/ +/*#define HAS_SOCKETPAIR /**/ +/*#define HAS_MSG_CTRUNC /**/ +/*#define HAS_MSG_DONTROUTE /**/ +/*#define HAS_MSG_OOB /**/ +/*#define HAS_MSG_PEEK /**/ +/*#define HAS_MSG_PROXY /**/ +/*#define HAS_SCM_RIGHTS /**/ + +/* HAS_SOCKS5_INIT: + * This symbol, if defined, indicates that the socks5_init routine is + * available to initialize SOCKS 5. + */ +/*#define HAS_SOCKS5_INIT /**/ + +/* HAS_SQRTL: + * This symbol, if defined, indicates that the sqrtl routine is + * available to do long double square roots. + */ +/*#define HAS_SQRTL /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#ifndef USE_STAT_BLOCKS +/*#define USE_STAT_BLOCKS /**/ +#endif + +/* HAS_STRUCT_STATFS_F_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem containing the file. + * This kind of struct statfs is coming from <sys/mount.h> (BSD 4.3), + * not from <sys/statfs.h> (SYSV). Older BSDs (like Ultrix) do not + * have statfs() and struct statfs, they have ustat() and getmnt() + * with struct ustat and struct fs_data. + */ +/*#define HAS_STRUCT_STATFS_F_FLAGS /**/ + +/* HAS_STRUCT_STATFS: + * This symbol, if defined, indicates that the struct statfs + * to do statfs() is supported. + */ +/*#define HAS_STRUCT_STATFS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems by file descriptors. + */ +/*#define HAS_FSTATVFS /**/ + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. + */ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +/* STDIO_PTR_LVAL_SETS_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n has the side effect of decreasing the + * value of File_cnt(fp) by n. + */ +/* STDIO_PTR_LVAL_NOCHANGE_CNT: + * This symbol is defined if using the FILE_ptr macro as an lvalue + * to increase the pointer by n leaves File_cnt(fp) unchanged. + */ +#define USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) ((fp)->_ptr) +#define STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) ((fp)->_cnt) +#define STDIO_CNT_LVALUE /**/ +/*#define STDIO_PTR_LVAL_SETS_CNT /**/ +/*#define STDIO_PTR_LVAL_NOCHANGE_CNT /**/ +#endif + +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. + */ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#define USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) ((fp)->_base) +#define FILE_bufsiz(fp) ((fp)->_cnt + (fp)->_ptr - (fp)->_base) +#endif + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#define HAS_STRERROR /**/ +#define HAS_SYS_ERRLIST /**/ +#define Strerror(e) strerror(e) + +/* HAS_STRTOLD: + * This symbol, if defined, indicates that the strtold routine is + * available to convert strings to long doubles. + */ +/*#define HAS_STRTOLD /**/ + +/* HAS_STRTOLL: + * This symbol, if defined, indicates that the strtoll routine is + * available to convert strings to long longs. + */ +/*#define HAS_STRTOLL /**/ + +/* HAS_STRTOQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to long longs (quads). + */ +/*#define HAS_STRTOQ /**/ + +/* HAS_STRTOQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to long longs (quads). + */ +/*#define HAS_STRTOQ /**/ + +/* HAS_STRTOULL: + * This symbol, if defined, indicates that the strtoull routine is + * available to convert strings to unsigned long longs. + */ +/*#define HAS_STRTOULL /**/ + +/* HAS_STRTOUQ: + * This symbol, if defined, indicates that the strtouq routine is + * available to convert strings to unsigned long longs (quads). + */ +/*#define HAS_STRTOUQ /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir _((DIR*)); + */ +/*#define HAS_TELLDIR_PROTO /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case <sys/types.h> should be + * included). + */ +#define Time_t time_t /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include <sys/times.h>. + */ +#define HAS_TIMES /**/ + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including <sys/sem.h>. If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +/*#define HAS_UNION_SEMUN /**/ +/*#define USE_SEMCTL_SEMUN /**/ +/*#define USE_SEMCTL_SEMID_DS /**/ + +/* HAS_USTAT: + * This symbol, if defined, indicates that the ustat system call is + * available to query file system statistics by dev_t. + */ +/*#define HAS_USTAT /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +/*#define HAS_VFORK /**/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t void /* Signal handler's return type */ + +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. + */ +#define HAS_VPRINTF /**/ +/*#define USE_CHAR_VSPRINTF /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +/*#define USE_DYNAMIC_LOADING /**/ + +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. + */ +#define DOUBLESIZE 8 /**/ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +/*#define EBCDIC /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +#define FFLUSH_NULL /**/ +/*#define FFLUSH_ALL /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Fpos_t fpos_t /* File position type */ + +/* Gid_t_f: + * This symbol defines the format string used for printing a Gid_t. + */ +#define Gid_t_f "d" /**/ + +/* Gid_t_sign: + * This symbol holds the signedess of a Gid_t. + * 1 for unsigned, -1 for signed. + */ +#define Gid_t_sign -1 /* GID sign */ + +/* Gid_t_size: + * This symbol holds the size of a Gid_t in bytes. + */ +#define Gid_t_size 4 /* GID size */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * gid_t, etc... It may be necessary to include <sys/types.h> to get + * any typedef'ed information. + */ +#define Gid_t gid_t /* Type for getgid(), etc... */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgroups(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, gid_t, etc... + * It may be necessary to include <sys/types.h> to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgroups().. + */ +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t gid_t /* Type for 2nd arg to [sg]etgroups() */ +#endif + +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the <db.h> header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the <db.h> header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +#define DB_Hash_t int /**/ +#define DB_Prefix_t int /**/ + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include <grp.h>. + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in <grp.h> contains gr_passwd. + */ +#define I_GRP /**/ +/*#define GRPASSWD /**/ + +/* I_ICONV: + * This symbol, if defined, indicates that <iconv.h> exists and + * should be included. + */ +/*#define I_ICONV /**/ + +/* I_IEEEFP: + * This symbol, if defined, indicates that <ieeefp.h> exists and + * should be included. + */ +/*#define I_IEEEFP /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include <inttypes.h>. + */ +/*#define I_INTTYPES /**/ + +/* I_LIBUTIL: + * This symbol, if defined, indicates that <libutil.h> exists and + * should be included. + */ +/*#define I_LIBUTIL /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include <mach/cthreads.h>. + */ +/*#define I_MACH_CTHREADS /**/ + +/* I_MNTENT: + * This symbol, if defined, indicates that <mntent.h> exists and + * should be included. + */ +/*#define I_MNTENT /**/ + +/* I_NETDB: + * This symbol, if defined, indicates that <netdb.h> exists and + * should be included. + */ +#define I_NETDB /**/ + +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include <netinet/tcp.h>. + */ +/*#define I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that <poll.h> exists and + * should be included. + */ +/*#define I_POLL /**/ + +/* I_PROT: + * This symbol, if defined, indicates that <prot.h> exists and + * should be included. + */ +/*#define I_PROT /**/ + +/* I_PTHREAD: + * This symbol, if defined, indicates to the C program that it should + * include <pthread.h>. + */ +/*#define I_PTHREAD /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include <pwd.h>. + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +#define I_PWD /**/ +/*#define PWQUOTA /**/ +/*#define PWAGE /**/ +/*#define PWCHANGE /**/ +/*#define PWCLASS /**/ +/*#define PWEXPIRE /**/ +/*#define PWCOMMENT /**/ +/*#define PWGECOS /**/ +/*#define PWPASSWD /**/ + +/* I_SHADOW: + * This symbol, if defined, indicates that <shadow.h> exists and + * should be included. + */ +/*#define I_SHADOW /**/ + +/* I_SOCKS: + * This symbol, if defined, indicates that <socks.h> exists and + * should be included. + */ +/*#define I_SOCKS /**/ + +/* I_SUNMATH: + * This symbol, if defined, indicates that <sunmath.h> exists and + * should be included. + */ +/*#define I_SUNMATH /**/ + +/* I_SYSLOG: + * This symbol, if defined, indicates that <syslog.h> exists and + * should be included. + */ +/*#define I_SYSLOG /**/ + +/* I_SYSMODE: + * This symbol, if defined, indicates that <sys/mode.h> exists and + * should be included. + */ +/*#define I_SYSMODE /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that <sys/mount.h> exists and + * should be included. + */ +/*#define I_SYS_MOUNT /**/ + +/* I_SYS_STATFS: + * This symbol, if defined, indicates that <sys/statfs.h> exists. + */ +/*#define I_SYS_STATFS /**/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that <sys/statvfs.h> exists and + * should be included. + */ +/*#define I_SYS_STATVFS /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that <sys/uio.h> exists and + * should be included. + */ +/*#define I_SYSUIO /**/ + +/* I_SYSUTSNAME: + * This symbol, if defined, indicates that <sys/utsname.h> exists and + * should be included. + */ +#define I_SYSUTSNAME /**/ + +/* I_SYS_VFS: + * This symbol, if defined, indicates that <sys/vfs.h> exists and + * should be included. + */ +/*#define I_SYS_VFS /**/ + +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <time.h>. + */ +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h>. + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include <sys/time.h> with KERNEL defined. + */ +/*#define I_TIME /**/ +#define I_SYS_TIME /**/ +/*#define I_SYS_TIME_KERNEL /**/ + +/* I_USTAT: + * This symbol, if defined, indicates that <ustat.h> exists and + * should be included. + */ +/*#define I_USTAT /**/ + +/* PERL_INC_VERSION_LIST: + * This variable specifies the list of subdirectories in over + * which perl.c:incpush() and lib/lib.pm will automatically + * search when adding directories to @INC, in a format suitable + * for a C initialization string. See the inc_version_list entry + * in Porting/Glossary for more details. + */ +#define PERL_INC_VERSION_LIST 0 /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +/*#define INSTALL_USR_BIN_PERL /**/ + +/* PERL_PRIfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for output. + */ +/* PERL_PRIgldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'g') for output. + */ +/* PERL_PRIeldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'e') for output. + */ +/* PERL_SCNfldbl: + * This symbol, if defined, contains the string used by stdio to + * format long doubles (format 'f') for input. + */ +#define PERL_PRIfldbl "Lf" /**/ +#define PERL_PRIgldbl "Lg" /**/ +#define PERL_PRIeldbl "Le" /**/ +#define PERL_SCNfldbl "Lf" /**/ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +/* Off_t_size: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t off_t /* <offset> type */ +#define LSEEKSIZE 4 /* <offset> size */ +#define Off_t_size 4 /* <offset> size */ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t void * /**/ +#define Free_t void /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +/*#define MYMALLOC /**/ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include <sys/types.h> + * to get any typedef'ed information. + */ +#define Mode_t mode_t /* file mode parameter for system calls */ + +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. + */ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK O_NONBLOCK +#define VAL_EAGAIN EAGAIN +#define RD_NODATA -1 +#define EOF_NONBLOCK + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). + */ +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). + */ +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). + */ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t char * /**/ +#define Netdb_hlen_t int /**/ +#define Netdb_name_t char * /**/ +#define Netdb_net_t long /**/ + +/* PERL_OTHERLIBDIRS: + * This variable contains a colon-separated set of paths for the perl + * binary to search for additional library files or modules. + * These directories will be tacked to the end of @INC. + * Perl will automatically search below each path for version- + * and architecture-specific directories. See PERL_INC_VERSION_LIST + * for more details. + */ +/*#define PERL_OTHERLIBDIRS "" /**/ + +/* IVTYPE: + * This symbol defines the C type used for Perl's IV. + */ +/* UVTYPE: + * This symbol defines the C type used for Perl's UV. + */ +/* I8TYPE: + * This symbol defines the C type used for Perl's I8. + */ +/* U8TYPE: + * This symbol defines the C type used for Perl's U8. + */ +/* I16TYPE: + * This symbol defines the C type used for Perl's I16. + */ +/* U16TYPE: + * This symbol defines the C type used for Perl's U16. + */ +/* I32TYPE: + * This symbol defines the C type used for Perl's I32. + */ +/* U32TYPE: + * This symbol defines the C type used for Perl's U32. + */ +/* I64TYPE: + * This symbol defines the C type used for Perl's I64. + */ +/* U64TYPE: + * This symbol defines the C type used for Perl's U64. + */ +/* NVTYPE: + * This symbol defines the C type used for Perl's NV. + */ +/* IVSIZE: + * This symbol contains the sizeof(IV). + */ +/* UVSIZE: + * This symbol contains the sizeof(UV). + */ +/* I8SIZE: + * This symbol contains the sizeof(I8). + */ +/* U8SIZE: + * This symbol contains the sizeof(U8). + */ +/* I16SIZE: + * This symbol contains the sizeof(I16). + */ +/* U16SIZE: + * This symbol contains the sizeof(U16). + */ +/* I32SIZE: + * This symbol contains the sizeof(I32). + */ +/* U32SIZE: + * This symbol contains the sizeof(U32). + */ +/* I64SIZE: + * This symbol contains the sizeof(I64). + */ +/* U64SIZE: + * This symbol contains the sizeof(U64). + */ +/* NVSIZE: + * This symbol contains the sizeof(NV). + */ +/* NV_PRESERVES_UV: + * This symbol, if defined, indicates that a variable of type NVTYPE + * can preserve all the bits of a variable of type UVTYPE. + */ +/* NV_PRESERVES_UV_BITS: + * This symbol contains the number of bits a variable of type NVTYPE + * can preserve of a variable of type UVTYPE. + */ +#define IVTYPE int /**/ +#define UVTYPE unsigned int /**/ +#define I8TYPE char /**/ +#define U8TYPE unsigned char /**/ +#define I16TYPE short /**/ +#define U16TYPE unsigned short /**/ +#define I32TYPE int /**/ +#define U32TYPE unsigned int /**/ +#ifdef HAS_QUAD +#define I64TYPE _error_ /**/ +#define U64TYPE _error_ /**/ +#endif +#define NVTYPE double /**/ +#define IVSIZE 4 /**/ +#define UVSIZE 4 /**/ +#define I8SIZE 1 /**/ +#define U8SIZE 1 /**/ +#define I16SIZE 2 /**/ +#define U16SIZE 2 /**/ +#define I32SIZE 4 /**/ +#define U32SIZE 4 /**/ +#ifdef HAS_QUAD +#define I64SIZE _error_ /**/ +#define U64SIZE _error_ /**/ +#endif +#define NVSIZE 8 /**/ +#define NV_PRESERVES_UV +#define NV_PRESERVES_UV_BITS 32 + +/* IVdf: + * This symbol defines the format string used for printing a Perl IV + * as a signed decimal integer. + */ +/* UVuf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned decimal integer. + */ +/* UVof: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned octal integer. + */ +/* UVxf: + * This symbol defines the format string used for printing a Perl UV + * as an unsigned hexadecimal integer in lowercase abcdef. + */ +/* NVef: + * This symbol defines the format string used for printing a Perl NV + * using %e-ish floating point format. + */ +/* NVff: + * This symbol defines the format string used for printing a Perl NV + * using %f-ish floating point format. + */ +/* NVgf: + * This symbol defines the format string used for printing a Perl NV + * using %g-ish floating point format. + */ +#define IVdf "d" /**/ +#define UVuf "u" /**/ +#define UVof "o" /**/ +#define UVxf "x" /**/ +#define NVef "e" /**/ +#define NVff "f" /**/ +#define NVgf "g" /**/ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Pid_t pid_t /* PID type */ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PRIVLIB "/system/ported/perl/lib/5.7" /**/ +#define PRIVLIB_EXP "/system/ported/perl/lib/5.7" /**/ + +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). + */ +#define PTRSIZE 4 /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() rand()/(RAND_MAX+1) /**/ +#define Rand_seed_t unsigned int /**/ +#define seedDrand01(x) srand((Rand_seed_t)x) /**/ +#define RANDBITS 15 /**/ + +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. + */ +#define SELECT_MIN_BITS 1 /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t fd_set * /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME "ZERO","ABRT","FPE","ILL","INT","SEGV","TERM","USR1","USR2","IO","HUP","URG","ALRM","KILL","PIPE","QUIT","CHLD","CONT","STOP","TSTP","TTIN","TTOU","BUS","RT1","RT2","RT3","RT4","RT5","RT6","RT7","RT8",0 /**/ +#define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,0 /**/ + +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-dependent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/*#define SITEARCH "" /**/ +/*#define SITEARCH_EXP "" /**/ + +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * After perl has been installed, users may install their own local + * architecture-independent modules in this directory with + * MakeMaker Makefile.PL + * or equivalent. See INSTALL for details. + */ +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/* SITELIB_STEM: + * This define is SITELIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +#define SITELIB "/system/ported/perl/lib/site/5.7" /**/ +#define SITELIB_EXP "/system/ported/perl/lib/site/5.7" /**/ +#define SITELIB_STEM "/system/ported/perl/lib/site" /**/ + +/* Size_t_size: + * This symbol holds the size of a Size_t in bytes. + */ +#define Size_t_size 4 /* */ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Size_t size_t /* length paramater for string functions */ + +/* Sock_size_t: + * This symbol holds the type used for the size argument of + * various socket calls (just the base type, not the pointer-to). + */ +#define Sock_size_t int /**/ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include <sys/types.h> or <unistd.h> + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t ssize_t /* signed count of bytes */ + +/* STARTPERL: + * This variable contains the string to put in front of a perl + * script to make sure (one hopes) that it runs with perl and not + * some shell. + */ +#define STARTPERL "!perl.pm" /**/ + +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. + */ +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. + */ +#define HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY _iob + +/* Uid_t_f: + * This symbol defines the format string used for printing a Uid_t. + */ +#define Uid_t_f "d" /**/ + +/* Uid_t_sign: + * This symbol holds the signedess of a Uid_t. + * 1 for unsigned, -1 for signed. + */ +#define Uid_t_sign -1 /* UID sign */ + +/* Uid_t_size: + * This symbol holds the size of a Uid_t in bytes. + */ +#define Uid_t_size 4 /* UID size */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * <sys/types.h> to get any typedef'ed information. + */ +#define Uid_t uid_t /* UID type */ + +/* USE_64_BIT_INT: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be employed (be they 32 or 64 bits). The minimal possible + * 64-bitness is used, just enough to get 64-bit integers into Perl. + * This may mean using for example "long longs", while your memory + * may still be limited to 2 gigabytes. + */ +/* USE_64_BIT_ALL: + * This symbol, if defined, indicates that 64-bit integers should + * be used when available. If not defined, the native integers + * will be used (be they 32 or 64 bits). The maximal possible + * 64-bitness is employed: LP64 or ILP64, meaning that you will + * be able to use more than 2 gigabytes of memory. This mode is + * even more binary incompatible than USE_64_BIT_INT. You may not + * be able to run the resulting executable in a 32-bit CPU at all or + * you may need at least to reboot your OS to 64-bit mode. + */ +#ifndef USE_64_BIT_INT +/*#define USE_64_BIT_INT /**/ +#endif + +#ifndef USE_64_BIT_ALL +/*#define USE_64_BIT_ALL /**/ +#endif + +/* USE_LARGE_FILES: + * This symbol, if defined, indicates that large file support + * should be used when available. + */ +#ifndef USE_LARGE_FILES +/*#define USE_LARGE_FILES /**/ +#endif + +/* USE_LONG_DOUBLE: + * This symbol, if defined, indicates that long doubles should + * be used when available. + */ +#ifndef USE_LONG_DOUBLE +#define USE_LONG_DOUBLE /**/ +#endif + +/* USE_MORE_BITS: + * This symbol, if defined, indicates that 64-bit interfaces and + * long doubles should be used when available. + */ +#ifndef USE_MORE_BITS +/*#define USE_MORE_BITS /**/ +#endif + +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. + */ +#ifndef MULTIPLICITY +/*#define MULTIPLICITY /**/ +#endif + +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. + */ +#ifndef USE_PERLIO +/*#define USE_PERLIO /**/ +#endif + +/* USE_SOCKS: + * This symbol, if defined, indicates that Perl should + * be built to use socks. + */ +#ifndef USE_SOCKS +/*#define USE_SOCKS /**/ +#endif + +/* USE_ITHREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the interpreter-based threading implementation. + */ +/* USE_5005THREADS: + * This symbol, if defined, indicates that Perl should be built to + * use the 5.005-based threading implementation. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +/*#define USE_5005THREADS /**/ +/*#define USE_ITHREADS /**/ +#if defined(USE_5005THREADS) && !defined(USE_ITHREADS) +#define USE_THREADS /* until src is revised*/ +#endif +/*#define OLD_PTHREADS_API /**/ + +/* PERL_VENDORARCH: + * If defined, this symbol contains the name of a private library. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. + * It may have a ~ on the front. + * The standard distribution will put nothing in this directory. + * Vendors who distribute perl may wish to place their own + * architecture-dependent modules and extensions in this directory with + * MakeMaker Makefile.PL INSTALLDIRS=vendor + * or equivalent. See INSTALL for details. + */ +/* PERL_VENDORARCH_EXP: + * This symbol contains the ~name expanded version of PERL_VENDORARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PERL_VENDORARCH "" /**/ +#define PERL_VENDORARCH_EXP "" /**/ + +/* PERL_VENDORLIB_EXP: + * This symbol contains the ~name expanded version of VENDORLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +/* PERL_VENDORLIB_STEM: + * This define is PERL_VENDORLIB_EXP with any trailing version-specific component + * removed. The elements in inc_version_list (inc_version_list.U) can + * be tacked onto this variable to generate a list of directories to search. + */ +#define PERL_VENDORLIB_EXP "" /**/ +#define PERL_VENDORLIB_STEM "" /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED 15 +#endif +#define VOIDFLAGS 15 +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + +/* PERL_XS_APIVERSION: + * This variable contains the version of the oldest perl binary + * compatible with the present perl. perl.c:incpush() and + * lib/lib.pm will automatically search in for older + * directories across major versions back to xs_apiversion. + * This is only useful if you have a perl library directory tree + * structured like the default one. + * See INSTALL for how this works. + * The versioned site_perl directory was introduced in 5.005, + * so that is the lowest possible value. + * Since this can depend on compile time options (such as + * bincompat) it is set by Configure. Other non-default sources + * of potential incompatibility, such as multiplicity, threads, + * debugging, 64bits, sfio, etc., are not checked for currently, + * though in principle we could go snooping around in old + * Config.pm files. + */ +/* PERL_PM_APIVERSION: + * This variable contains the version of the oldest perl + * compatible with the present perl. (That is, pure perl modules + * written for pm_apiversion will still work for the current + * version). perl.c:incpush() and lib/lib.pm will automatically + * search in /system/ported/perl/lib/site/5.7 for older directories across major versions + * back to pm_apiversion. This is only useful if you have a perl + * library directory tree structured like the default one. The + * versioned site_perl library was introduced in 5.005, so that's + * the default setting for this variable. It's hard to imagine + * it changing before Perl6. It is included here for symmetry + * with xs_apiveprsion -- the searching algorithms will + * (presumably) be similar. + * See the INSTALL file for how this works. + */ +#define PERL_XS_APIVERSION "5.00563" +#define PERL_PM_APIVERSION "5.005" + +/* HAS_GETPGRP: + * This symbol, if defined, indicates that the getpgrp routine is + * available to get the current process group. + */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ +#define HAS_GETPGRP /**/ +/*#define USE_BSD_GETPGRP /**/ + +/* HAS_SETPGRP: + * This symbol, if defined, indicates that the setpgrp routine is + * available to set the current process group. + */ +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. + */ +/*#define HAS_SETPGRP /**/ +/*#define USE_BSD_SETPGRP /**/ + +/* NEED_VA_COPY: + * This symbol, if defined, indicates that the system stores + * the variable argument list datatype, va_list, in a format + * that cannot be copied by simple assignment, so that some + * other means must be used when copying is required. + * As such systems vary in their provision (or non-provision) + * of copying mechanisms, handy.h defines a platform- + * independent macro, Perl_va_copy(src, dst), to do the job. + */ +/*#define NEED_VA_COPY / **/ + +#endif |