diff options
Diffstat (limited to 'win32/Makefile.win64')
| -rw-r--r-- | win32/Makefile.win64 | 1173 |
1 files changed, 1173 insertions, 0 deletions
diff --git a/win32/Makefile.win64 b/win32/Makefile.win64 new file mode 100644 index 0000000000..11b96f463e --- /dev/null +++ b/win32/Makefile.win64 @@ -0,0 +1,1173 @@ +# +# Makefile to build perl on Windows NT 64 Bit using Microsoft NMAKE. +# +# Building for Itanium requires the latest SDK, a (currently unsupported) +# native Microsoft IA64 Compiler (13.00.9367.7 for IA-64 or higher), and +# of course an Itanium box running Windows XP. +# Quick start: +# 1) Edit INST_TOP and INST_DRV in this Makefile if necessary. +# 2) nmake -f Makefile.win64 +# 3) nmake -f Makefile.win64 test +# => Currently lib/posix.t 2 and op/64bitint.t 23, 53-55 will fail +# 4) nmake -f Makefile.win64 install +# +# This Configuration eanbles 64 Bit porting warning (/Wp64). Watch out for C4700 +# warnings when porting addon modules to WIN64, most of them will result in runtime +# crashes. Remember that most data types remain unchanged on WIN64. Especially long +# is still 32 Bit. Native 64 Bit datatypes are for example __int64 or size_t. If +# you really need to add WIN64 specific code use ifdef _WIN64. +# +# randolf.werner@sap.com + +## +## Make sure you read README.win32 *before* you mess with anything here! +## +## If you want a configuration that is the same as ActivePerl (see +## www.ActiveState.com) make sure you set at least BUILD_FLAVOR below! +## + +## +## Build configuration. Edit the values below to suit your needs. +## + +# +# Set these to wherever you want "nmake install" to put your newly +# built perl. Setting it to a path with spaces is NOT recommended. +# +INST_DRV = c: +INST_TOP = $(INST_DRV)\perl64 + +# +# uncomment one of the following lines if you are using either +# Visual C++ 2.x, or Visual C++ 5.x (aka Visual Studio 97) _without_ +# service pack 3 applied. +# +# If you have 5.x SP3 or later, or 6.x, no change is required. +# +#CCTYPE = MSVC20 +#CCTYPE = MSVC_PRE_50SP3 + +# +# set the install locations of the compiler include/libraries. Running +# VCVARS32.BAT is *required* when using Visual C. Some versions of +# Visual C earlier than 5.x SP3 don't define MSVCDIR in the environment. +# If such is the case you may have to set CCHOME explicitly. Spaces in +# the path name should not be quoted. +# +# If you have run VCVARS32.BAT and have VC 5.x SP3 or later, the defaults +# should just work. +# +#CCHOME = f:\msvc20 +CCHOME = $(MSVCDIR) +CCINCDIR = $(CCHOME)\include +CCLIBDIR = $(CCHOME)\lib + +# +# if you have the source for des_fcrypt(), uncomment CRYPT_SRC and make sure +# the file exists (see README.win32). File should be located in the same +# directory as this makefile. +# +# If you didn't set CRYPT_SRC and if you have des_fcrypt() available in a +# library, uncomment CRYPT_LIB, and make sure the library exists (see +# README.win32). Specify the full pathname of the library. +# +# If you don't enable one of these, the crypt() builtin will fail to work. +# (Generally not critical.) +# +#CRYPT_SRC = fcrypt.c +#CRYPT_LIB = fcrypt.lib + +# +# uncomment this option if you want to bulk-enable all the options that +# ActiveState uses to build their ActivePerl distribution. If you set this, +# there should be no need to set any of the other options that follow. +# +# If you don't enable this, the defaults below will get you the most +# efficient perl configuration possible that will also be compatible +# with the build defaults used on Unix platforms. On the other hand, +# the ActivePerl configuration will get you fork() emulation at the +# cost of some added bloat. +# +#BUILD_FLAVOR = ActivePerl + +# +# uncomment next line if you want debug version of perl (big and slow). +# If not enabled, we automatically try to use maximum optimization +# with all compilers that are known to have a working optimizer. +# +#CFG = Debug + +# +# Comment this out if you DON'T want your perl installation to be versioned. +# This means that the new installation will overwrite any files from the +# old installation at the same INST_TOP location. Leaving it enabled is +# the safest route, as perl adds the extra version directory to all the +# locations it installs files to. If you disable it, an alternative +# versioned installation can be obtained by setting INST_TOP above to a +# path that includes an arbitrary version string. +# +INST_VER = \5.6.1 + +# +# Comment this out if you DON'T want your perl installation to have +# architecture specific components. This means that architecture- +# specific files will be installed along with the architecture-neutral +# files. Leaving it enabled is safer and more flexible, in case you +# want to build multiple flavors of perl and install them together in +# the same location. Commenting it out gives you a simpler +# installation that is easier to understand for beginners. +# +INST_ARCH = \$(ARCHNAME) + +# +# uncomment to enable multiple interpreters. This is need for fork() +# emulation. +# +#USE_MULTI = define + +# +# Beginnings of interpreter cloning/threads; still very incomplete. +# This should be enabled to get the fork() emulation. This needs +# USE_MULTI as well. +# +#USE_ITHREADS = define + +# +# uncomment to enable the implicit "host" layer for all system calls +# made by perl. This needs USE_MULTI above. This is also needed to +# get fork(). +# +#USE_IMP_SYS = define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_ITHREADS instead). +# +# uncomment to enable threads-capabilities. This is incompatible with +# USE_ITHREADS, and is only here for people who may have come to rely +# on the experimental Thread support that was in 5.005. +# +#USE_5005THREADS= define + +# +# WARNING! This option is deprecated and will eventually go away (enable +# USE_MULTI instead). +# +# uncomment next line if you want to use the PERL_OBJECT build option. +# DO NOT ENABLE unless you have legacy code that relies on the C++ +# CPerlObj class that was available in 5.005. This cannot be enabled +# if you ask for USE_5005THREADS or USE_MULTI above. +# +#USE_OBJECT = define + +# +# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. +# It has patches that fix known bugs in older versions of MSVCRT.DLL. +# This currently requires VC 5.0 with Service Pack 3 or later. +# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ +# and follow the directions in the package to install. +# +# Not recommended if you have VC 6.x and you're not running Windows 9x. +# +#USE_PERLCRT = define + +# +# uncomment to enable linking with setargv.obj under the Visual C +# compiler. Setting this option enables perl to expand wildcards in +# arguments, but it may be harder to use alternate methods like +# File::DosGlob that are more powerful, or use perl inside shells +# that do the expansion for you. This option is supported only +# with Visual C. +# +#USE_SETARGV = define + +# +# set this if you wish to use perl's malloc +# WARNING: Turning this on/off WILL break binary compatibility with extensions +# you may have compiled with/without it. Be prepared to recompile all +# extensions if you change the default. Currently, this cannot be enabled +# if you ask for USE_IMP_SYS above. +# +#PERL_MALLOC = define + +# +# Additional compiler flags can be specified here. +# + +# +# This should normally be disabled. Adding -DPERL_POLLUTE enables support +# for old symbols by default, at the expense of extreme pollution. You most +# probably just want to build modules that won't compile with +# perl Makefile.PL POLLUTE=1 +# instead of enabling this. Please report such modules to the respective +# authors. +# +#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE + +# +# This should normally be disabled. Enabling it will disable the File::Glob +# implementation of CORE::glob. +# +#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB + +# +# This should normally be disabled. Enabling it causes perl to read scripts +# in text mode (which is the 5.005 behavior) and will break ByteLoader. +#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS + +# +# specify semicolon-separated list of extra directories that modules will +# look for libraries (spaces in path names need not be quoted) +# +EXTRALIBDIRS = + +# +# set this to your email address (perl will guess a value from +# from your loginname and your hostname, which may not be right) +# +#EMAIL = + +## +## Build configuration ends. +## + +##################### CHANGE THESE ONLY IF YOU MUST ##################### + +!IF "$(BUILD_FLAVOR)" == "ActivePerl" +INST_VER = +INST_ARCH = +USE_MULTI = define +USE_ITHREADS = define +USE_IMP_SYS = define +USE_5005THREADS = undef +USE_OBJECT = undef +USE_PERLCRT = undef +USE_SETARGV = +PERL_MALLOC = undef +!ENDIF + +!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" +D_CRYPT = undef +!ELSE +D_CRYPT = define +CRYPT_FLAG = -DHAVE_DES_FCRYPT +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +PERL_MALLOC = undef +USE_5005THREADS = undef +USE_MULTI = undef +USE_IMP_SYS = define +!ENDIF + +!IF "$(PERL_MALLOC)" == "" +PERL_MALLOC = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "" +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_5005THREADS)" == "define" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "define" +PERL_MALLOC = undef +!ENDIF + +!IF "$(CCTYPE)" == "" +CCTYPE = MSVC60 +!ENDIF + +!IF "$(USE_MULTI)" == "" +USE_MULTI = undef +!ENDIF + +!IF "$(USE_OBJECT)" == "" +USE_OBJECT = undef +!ENDIF + +!IF "$(USE_ITHREADS)" == "" +USE_ITHREADS = undef +!ENDIF + +!IF "$(USE_IMP_SYS)" == "" +USE_IMP_SYS = undef +!ENDIF + +!IF "$(USE_PERLCRT)" == "" +USE_PERLCRT = undef +!ENDIF + +!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" +USE_MULTI = define +!ENDIF + +!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" +USE_MULTI = define +USE_5005THREADS = undef +!ENDIF + +!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT +!ENDIF + +!IF "$(USE_IMP_SYS)" != "undef" +BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS +!ENDIF + +!IF "$(PROCESSOR_ARCHITECTURE)" == "" +PROCESSOR_ARCHITECTURE = x86 +!ENDIF + +!IF "$(USE_OBJECT)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object +!ELSE +!IF "$(USE_5005THREADS)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread +!ELSE +!IF "$(USE_MULTI)" == "define" +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi +!ELSE +ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) +!ENDIF +!ENDIF +!ENDIF + +!IF "$(USE_ITHREADS)" == "define" +ARCHNAME = $(ARCHNAME)-thread +!ENDIF + +# Visual Studio 98 specific +!IF "$(CCTYPE)" == "MSVC60" +# VC 6.0 can load the socket dll on demand. Makes the test suite +# run in about 10% less time. +DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib +!ENDIF + + +ARCHDIR = ..\lib\$(ARCHNAME) +COREDIR = ..\lib\CORE +AUTODIR = ..\lib\auto +LIBDIR = ..\lib +EXTDIR = ..\ext +PODDIR = ..\pod +EXTUTILSDIR = $(LIBDIR)\ExtUtils + +# +INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin +INST_BIN = $(INST_SCRIPT)$(INST_ARCH) +INST_LIB = $(INST_TOP)$(INST_VER)\lib +INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) +INST_COREDIR = $(INST_ARCHLIB)\CORE +INST_POD = $(INST_LIB)\pod +INST_HTML = $(INST_TOP)$(INST_VER)\html + +# +# Programs to compile, build .lib files and link +# + +CC = cl +LINK32 = link +LIB32 = $(LINK32) -lib +RSC = rc + +# +# Options +# + +INCLUDES = -I$(COREDIR) -I.\include -I. -I.. +#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX +DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) +LOCDEFS = -DPERLDLL -DPERL_CORE +SUBSYS = console +CXX_FLAG = -TP -GX + +!IF "$(USE_PERLCRT)" != "define" +LIBC = msvcrt.lib +!ELSE +LIBC = PerlCRT.lib +!ENDIF + +PERLEXE_RES = +PERLDLL_RES = + +!IF "$(CFG)" == "Debug" +! IF "$(CCTYPE)" == "MSVC20" +OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Z7 -DDEBUGGING +! ELSE +OPTIMIZE = -DCONSERVATIVE -Wp64 -Od -Op -MD -Zi -DDEBUGGING +! ENDIF +LINK_DBG = -debug +!ELSE +# -O1 yields smaller code, which turns out to be faster than -O2 +OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG +# VC 6.0 seems capable of compiling perl correctly with optimizations +# enabled. Anything earlier fails tests. +! IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC_PRE_50SP3" +OPTIMIZE = -DCONSERVATIVE -Wp64 -O2 -Op -MD -Zi -DNDEBUG +! ENDIF +LINK_DBG = -debug +!ENDIF + + +!IF "$(USE_OBJECT)" == "define" +OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) +BUILDOPT = $(BUILDOPT) -DPERL_OBJECT +!ENDIF + +!IF "$(USE_PERLCRT)" != "define" +BUILDOPT = $(BUILDOPT) +!ENDIF + +LIBBASEFILES = $(CRYPT_LIB) \ + oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ + comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ + netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ + version.lib odbc32.lib odbccp32.lib + +# we add LIBC here, since we may be using PerlCRT.dll +LIBFILES = $(LIBBASEFILES) $(LIBC) + +CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ + $(PCHFLAGS) $(OPTIMIZE) +LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ + -libpath:"$(INST_COREDIR)" \ + -machine:$(PROCESSOR_ARCHITECTURE) +OBJOUT_FLAG = -Fo +EXEOUT_FLAG = -Fe + +CFLAGS_O = $(CFLAGS) $(BUILDOPT) + +#################### do not edit below this line ####################### +############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## + +o = .obj + +# +# Rules +# + +.SUFFIXES : .c $(o) .dll .lib .exe .rc .res + +.c$(o): + $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< + +.y.c: + $(NOOP) + +$(o).dll: + $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ + -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) + +.rc.res: + $(RSC) -i.. $< + +# +# various targets +PERLIMPLIB = ..\perl56.lib +PERLDLL = ..\perl56.dll + +MINIPERL = ..\miniperl.exe +MINIDIR = .\mini +PERLEXE = ..\perl.exe +WPERLEXE = ..\wperl.exe +GLOBEXE = ..\perlglob.exe +CONFIGPM = ..\lib\Config.pm +MINIMOD = ..\lib\ExtUtils\Miniperl.pm +X2P = ..\x2p\a2p.exe + +PL2BAT = bin\pl2bat.pl +GLOBBAT = bin\perlglob.bat + +UTILS = \ + ..\utils\h2ph \ + ..\utils\splain \ + ..\utils\dprofpp \ + ..\utils\perlbug \ + ..\utils\pl2pm \ + ..\utils\c2ph \ + ..\utils\h2xs \ + ..\utils\perldoc \ + ..\utils\perlcc \ + ..\pod\checkpods \ + ..\pod\pod2html \ + ..\pod\pod2latex \ + ..\pod\pod2man \ + ..\pod\pod2text \ + ..\pod\pod2usage \ + ..\pod\podchecker \ + ..\pod\podselect \ + ..\x2p\find2perl \ + ..\x2p\s2p \ + bin\exetype.pl \ + bin\runperl.pl \ + bin\pl2bat.pl \ + bin\perlglob.pl \ + bin\search.pl + +MAKE = nmake -nologo + +CFGSH_TMPL = config.win64 +CFGH_TMPL = config_H.win64 + +XCOPY = xcopy /f /r /i /d +RCOPY = xcopy /f /r /i /e /d +NOOP = @echo +NULL = + +# +# filenames given to xsubpp must have forward slashes (since it puts +# full pathnames in #line strings) +XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ + -C++ -prototypes + +MICROCORE_SRC = \ + ..\av.c \ + ..\deb.c \ + ..\doio.c \ + ..\doop.c \ + ..\dump.c \ + ..\globals.c \ + ..\gv.c \ + ..\hv.c \ + ..\mg.c \ + ..\op.c \ + ..\perl.c \ + ..\perlapi.c \ + ..\perly.c \ + ..\pp.c \ + ..\pp_ctl.c \ + ..\pp_hot.c \ + ..\pp_sys.c \ + ..\regcomp.c \ + ..\regexec.c \ + ..\run.c \ + ..\scope.c \ + ..\sv.c \ + ..\taint.c \ + ..\toke.c \ + ..\universal.c \ + ..\utf8.c \ + ..\util.c \ + ..\xsutils.c + +EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c + +!IF "$(PERL_MALLOC)" == "define" +EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c +!ENDIF + +!IF "$(USE_OBJECT)" != "define" +EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c +!ENDIF + +WIN32_SRC = \ + .\win32.c \ + .\win32sck.c \ + .\win32thread.c + +!IF "$(CRYPT_SRC)" != "" +WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) +!ENDIF + +DLL_SRC = $(DYNALOADER).c + +X2P_SRC = \ + ..\x2p\a2p.c \ + ..\x2p\hash.c \ + ..\x2p\str.c \ + ..\x2p\util.c \ + ..\x2p\walk.c + +CORE_NOCFG_H = \ + ..\av.h \ + ..\cop.h \ + ..\cv.h \ + ..\dosish.h \ + ..\embed.h \ + ..\form.h \ + ..\gv.h \ + ..\handy.h \ + ..\hv.h \ + ..\iperlsys.h \ + ..\mg.h \ + ..\nostdio.h \ + ..\op.h \ + ..\opcode.h \ + ..\perl.h \ + ..\perlapi.h \ + ..\perlsdio.h \ + ..\perlsfio.h \ + ..\perly.h \ + ..\pp.h \ + ..\proto.h \ + ..\regexp.h \ + ..\scope.h \ + ..\sv.h \ + ..\thread.h \ + ..\unixish.h \ + ..\utf8.h \ + ..\util.h \ + ..\warnings.h \ + ..\XSUB.h \ + ..\EXTERN.h \ + ..\perlvars.h \ + ..\intrpvar.h \ + ..\thrdvar.h \ + .\include\dirent.h \ + .\include\netdb.h \ + .\include\sys\socket.h \ + .\win32.h + +CORE_H = $(CORE_NOCFG_H) .\config.h + +MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) +CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) +WIN32_OBJ = $(WIN32_SRC:.c=.obj) +MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ + $(MINIDIR)\miniperlmain$(o) \ + $(MINIDIR)\perlio$(o) +MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) +MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) +DLL_OBJ = $(DLL_SRC:.c=.obj) +X2P_OBJ = $(X2P_SRC:.c=.obj) + +PERLDLL_OBJ = $(CORE_OBJ) +PERLEXE_OBJ = perlmain$(o) + +PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) +#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ) + +!IF "$(USE_SETARGV)" != "" +SETARGV_OBJ = setargv$(o) +!ENDIF + +DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ + Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ + Sys/Hostname +STATIC_EXT = DynaLoader +NONXS_EXT = Errno + +DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader +SOCKET = $(EXTDIR)\Socket\Socket +FCNTL = $(EXTDIR)\Fcntl\Fcntl +OPCODE = $(EXTDIR)\Opcode\Opcode +SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File +IO = $(EXTDIR)\IO\IO +POSIX = $(EXTDIR)\POSIX\POSIX +ATTRS = $(EXTDIR)\attrs\attrs +THREAD = $(EXTDIR)\Thread\Thread +B = $(EXTDIR)\B\B +RE = $(EXTDIR)\re\re +DUMPER = $(EXTDIR)\Data\Dumper\Dumper +ERRNO = $(EXTDIR)\Errno\Errno +PEEK = $(EXTDIR)\Devel\Peek\Peek +BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader +DPROF = $(EXTDIR)\Devel\DProf\DProf +GLOB = $(EXTDIR)\File\Glob\Glob +HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname + +SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll +FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll +OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll +SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll +IO_DLL = $(AUTODIR)\IO\IO.dll +POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll +ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll +THREAD_DLL = $(AUTODIR)\Thread\Thread.dll +B_DLL = $(AUTODIR)\B\B.dll +DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll +PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll +RE_DLL = $(AUTODIR)\re\re.dll +BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll +DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll +GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll +HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll + +ERRNO_PM = $(LIBDIR)\Errno.pm + +EXTENSION_C = \ + $(SOCKET).c \ + $(FCNTL).c \ + $(OPCODE).c \ + $(SDBM_FILE).c \ + $(IO).c \ + $(POSIX).c \ + $(ATTRS).c \ + $(THREAD).c \ + $(RE).c \ + $(DUMPER).c \ + $(PEEK).c \ + $(B).c \ + $(BYTELOADER).c \ + $(DPROF).c \ + $(GLOB).c \ + $(HOSTNAME).c + +EXTENSION_DLL = \ + $(SOCKET_DLL) \ + $(FCNTL_DLL) \ + $(OPCODE_DLL) \ + $(SDBM_FILE_DLL)\ + $(IO_DLL) \ + $(POSIX_DLL) \ + $(ATTRS_DLL) \ + $(DUMPER_DLL) \ + $(PEEK_DLL) \ + $(B_DLL) \ + $(RE_DLL) \ + $(THREAD_DLL) \ + $(BYTELOADER_DLL) \ + $(DPROF_DLL) \ + $(GLOB_DLL) \ + $(HOSTNAME_DLL) + +EXTENSION_PM = \ + $(ERRNO_PM) + +POD2HTML = $(PODDIR)\pod2html +POD2MAN = $(PODDIR)\pod2man +POD2LATEX = $(PODDIR)\pod2latex +POD2TEXT = $(PODDIR)\pod2text + +CFG_VARS = \ + "INST_DRV=$(INST_DRV)" \ + "INST_TOP=$(INST_TOP)" \ + "INST_VER=$(INST_VER)" \ + "INST_ARCH=$(INST_ARCH)" \ + "archname=$(ARCHNAME)" \ + "cc=$(CC)" \ + "ccflags=-nologo $(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ + "cf_email=$(EMAIL)" \ + "d_crypt=$(D_CRYPT)" \ + "d_mymalloc=$(PERL_MALLOC)" \ + "libs=$(LIBFILES)" \ + "incpath=$(CCINCDIR:"=\")" \ + "libperl=$(PERLIMPLIB:..\=)" \ + "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ + "libc=$(LIBC)" \ + "make=nmake" \ + "static_ext=$(STATIC_EXT)" \ + "dynamic_ext=$(DYNAMIC_EXT)" \ + "nonxs_ext=$(NONXS_EXT)" \ + "use5005threads=$(USE_5005THREADS)" \ + "useithreads=$(USE_ITHREADS)" \ + "usethreads=$(USE_5005THREADS)" \ + "usemultiplicity=$(USE_MULTI)" \ + "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ + "optimize=$(OPTIMIZE:"=\")" + +# +# Top targets +# + +all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ + $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) + +$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c + +#------------------------------------------------------------ + +$(GLOBEXE) : perlglob$(o) + $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ + perlglob$(o) setargv$(o) + +perlglob$(o) : perlglob.c + +config.w32 : $(CFGSH_TMPL) + copy $(CFGSH_TMPL) config.w32 + +.\config.h : $(CFGH_TMPL) + -del /f config.h + copy $(CFGH_TMPL) config.h + +..\config.sh : config.w32 $(MINIPERL) config_sh.PL + $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh + +# this target is for when changes to the main config.sh happen +# edit config.{b,v,g}c and make this target once for each supported +# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) +regen_config_h: + perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh + cd .. + -del /f perl.exe + perl configpm + cd win32 + -del /f $(CFGH_TMPL) + -mkdir $(COREDIR) + -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" + rename config.h $(CFGH_TMPL) + +$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl + cd .. && miniperl configpm + if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) + $(XCOPY) ..\*.h $(COREDIR)\*.* + $(XCOPY) *.h $(COREDIR)\*.* + $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* + $(RCOPY) include $(COREDIR)\*.* + $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ + || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) + +$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) +<< + +$(MINIDIR) : + if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" + +$(MINICORE_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c + +$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) + $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c + +# -DPERL_IMPLICIT_SYS needs C++ for perllib.c +# This is the only file that depends on perlhost.h, vmem.h, and vdir.h +!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" +perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h + $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c +!ENDIF + +# 1. we don't want to rebuild miniperl.exe when config.h changes +# 2. we don't want to rebuild miniperl.exe with non-default config.h +$(MINI_OBJ) : $(CORE_NOCFG_H) + +$(WIN32_OBJ) : $(CORE_H) +$(CORE_OBJ) : $(CORE_H) +$(DLL_OBJ) : $(CORE_H) +$(X2P_OBJ) : $(CORE_H) + +perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl + $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ + CCTYPE=$(CCTYPE) > perldll.def + +$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) + $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< + $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) +<< + $(XCOPY) $(PERLIMPLIB) $(COREDIR) + +$(MINIMOD) : $(MINIPERL) ..\minimod.pl + cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm + +..\x2p\a2p$(o) : ..\x2p\a2p.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c + +..\x2p\hash$(o) : ..\x2p\hash.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c + +..\x2p\str$(o) : ..\x2p\str.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c + +..\x2p\util$(o) : ..\x2p\util.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c + +..\x2p\walk$(o) : ..\x2p\walk.c + $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c + +$(X2P) : $(MINIPERL) $(X2P_OBJ) + $(MINIPERL) ..\x2p\find2perl.PL + $(MINIPERL) ..\x2p\s2p.PL + $(LINK32) -subsystem:console -out:$@ @<< + $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) +<< + +perlmain.c : runperl.c + copy runperl.c perlmain.c + +perlmain$(o) : perlmain.c + $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c + +$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) + $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ + $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) + copy $(PERLEXE) $(WPERLEXE) + $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + +$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) + if not exist $(AUTODIR) mkdir $(AUTODIR) + cd $(EXTDIR)\$(*B) + ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL + ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL + cd ..\..\win32 + $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) + $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) + cd $(EXTDIR)\$(*B) + $(XSUBPP) dl_win32.xs > $(*B).c + cd ..\..\win32 + +$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs + copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs + +$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs + cd $(EXTDIR)\Data\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(DPROF_DLL): $(PERLEXE) $(DPROF).xs + cd $(EXTDIR)\Devel\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(GLOB_DLL): $(PERLEXE) $(GLOB).xs + cd $(EXTDIR)\File\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(PEEK_DLL): $(PERLEXE) $(PEEK).xs + cd $(EXTDIR)\Devel\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(RE_DLL): $(PERLEXE) $(RE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(B_DLL): $(PERLEXE) $(B).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(THREAD_DLL): $(PERLEXE) $(THREAD).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(POSIX_DLL): $(PERLEXE) $(POSIX).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(IO_DLL): $(PERLEXE) $(IO).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs + cd $(EXTDIR)\Sys\$(*B) + ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\..\win32 + +$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL + cd $(EXTDIR)\$(*B) + ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl + $(MAKE) + cd ..\..\win32 + +doc: $(PERLEXE) + $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ + --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ + --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse + +utils: $(PERLEXE) $(X2P) + cd ..\utils + $(MAKE) PERL=$(MINIPERL) + cd ..\pod + copy ..\README.aix .\perlaix.pod + copy ..\README.amiga .\perlamiga.pod + copy ..\README.bs2000 .\perlbs2000.pod + copy ..\README.cygwin .\perlcygwin.pod + copy ..\README.dos .\perldos.pod + copy ..\README.epoc .\perlepoc.pod + copy ..\README.hpux .\perlhpux.pod + copy ..\README.mpeix .\perlmpeix.pod + copy ..\README.os2 .\perlos2.pod + copy ..\README.os390 .\perlos390.pod + copy ..\README.solaris .\perlsolaris.pod + copy ..\README.vmesa .\perlvmesa.pod + copy ..\vms\perlvms.pod .\perlvms.pod + copy ..\README.vos .\perlvos.pod + copy ..\README.win32 .\perlwin32.pod + $(MAKE) -f ..\win32\pod.mak converters + cd ..\win32 + $(PERLEXE) $(PL2BAT) $(UTILS) + +distclean: clean + -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ + $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) + -del /f *.def *.map + -del /f $(EXTENSION_DLL) $(EXTENSION_PM) + -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm + -del /f $(EXTDIR)\DynaLoader\dl_win32.xs $(EXTDIR)\DynaLoader\DynaLoader.pm + -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm + -del /f $(LIBDIR)\XSLoader.pm $(EXTDIR)\DynaLoader\XSLoader.pm + -del /f $(LIBDIR)\Devel\.exists $(LIBDIR)\File\.exists $(LIBDIR)\Sys\.exists + -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm + -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm + -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm + -del /f $(LIBDIR)\B.pm $(EXTDIR)\B\defsubs.h $(LIBDIR)\O.pm $(LIBDIR)\re.pm + -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm + -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm + -del /f $(LIBDIR)\File\Glob.pm + -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO + -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread + -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B + -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data + cd $(PODDIR) + -del /f *.html *.bat checkpods \ + perlaix.pod perlamiga.pod perlbs2000.pod perlcygwin.pod \ + perldos.pod perlepoc.pod perlhpux.pod perlmachten.pod \ + perlmacos.pod perlmpeix.pod perlos2.pod perlos390.pod \ + perlsolaris.pod perlvmesa.pod perlvms.pod perlvos.pod \ + perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \ + podchecker podselect + cd ..\utils + -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp \ + *.bat perlcc pstruct + cd ..\win32 + cd ..\x2p + -del /f find2perl s2p + -del /f *.bat + cd ..\win32 + -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new + -del /f $(CONFIGPM) + -del /f bin\*.bat + cd $(EXTDIR) + -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib + cd ..\win32 + -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) + -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) + +install : all installbare installhtml + +installbare : utils + $(PERLEXE) ..\installperl + if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* + $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* + $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* + +installhtml : doc + $(RCOPY) html\*.* $(INST_HTML)\*.* + +inst_lib : $(CONFIGPM) + copy splittree.pl .. + $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) + $(RCOPY) ..\lib $(INST_LIB)\*.* + +minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils + $(XCOPY) $(MINIPERL) ..\t\perl.exe + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + attrib -r ..\t\*.* + copy test ..\t + cd ..\t + $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t + cd ..\win32 + +test-prep : all utils + $(XCOPY) $(PERLEXE) ..\t\$(NULL) + $(XCOPY) $(PERLDLL) ..\t\$(NULL) + $(XCOPY) $(GLOBEXE) ..\t\$(NULL) + +test : test-prep + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide : test-prep + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +test-wide-notty : test-prep + set PERL_SKIP_TTY_TEST=1 + set HARNESS_PERL_SWITCHES=-C + cd ..\t + $(PERLEXE) -I..\lib harness + cd ..\win32 + +clean : + -@erase miniperlmain$(o) + -@erase $(MINIPERL) + -@erase perlglob$(o) + -@erase perlmain$(o) + -@erase config.w32 + -@erase /f config.h + -@erase $(GLOBEXE) + -@erase $(PERLEXE) + -@erase $(WPERLEXE) + -@erase $(PERLDLL) + -@erase $(CORE_OBJ) + -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) + -@erase $(WIN32_OBJ) + -@erase $(DLL_OBJ) + -@erase $(X2P_OBJ) + -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res + -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat + -@erase ..\x2p\*.exe ..\x2p\*.bat + -@erase *.ilk + -@erase *.pdb + +# Handy way to run perlbug -ok without having to install and run the +# installed perlbug. We don't re-run the tests here - we trust the user. +# Please *don't* use this unless all tests pass. +# If you want to report test failures, use "nmake nok" instead. +ok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" + +okfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok + +nok: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" + +nokfile: utils + $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok |