diff options
Diffstat (limited to 'win32/Makefile')
| -rw-r--r-- | win32/Makefile | 2240 |
1 files changed, 1120 insertions, 1120 deletions
diff --git a/win32/Makefile b/win32/Makefile index af119909e8..094f93c212 100644 --- a/win32/Makefile +++ b/win32/Makefile @@ -1,1120 +1,1120 @@ -# -# Makefile to build perl on Windows NT using Microsoft NMAKE. -# -# This is set up to build a perl.exe that runs off a shared library -# (perl56.dll). Also makes individual DLLs for the XS extensions. -# - -## -## Make sure you read README.win32 *before* you mess with anything here! -## - -## -## Build configuration. Edit the values below to suit your needs. -## - -# -# Set these to wherever you want "nmake install" to put your -# newly built perl. -# -INST_DRV = c: -INST_TOP = $(INST_DRV)\perl - -# -# Comment this out if you DON'T want your perl installation to be versioned. -# This means that the new installation will overwrite any files from the -# old installation at the same INST_TOP location. Leaving it enabled is -# the safest route, as perl adds the extra version directory to all the -# locations it installs files to. If you disable it, an alternative -# versioned installation can be obtained by setting INST_TOP above to a -# path that includes an arbitrary version string. -# -INST_VER = \5.6.0 - -# -# Comment this out if you DON'T want your perl installation to have -# architecture specific components. This means that architecture- -# specific files will be installed along with the architecture-neutral -# files. Leaving it enabled is safer and more flexible, in case you -# want to build multiple flavors of perl and install them together in -# the same location. Commenting it out gives you a simpler -# installation that is easier to understand for beginners. -# -INST_ARCH = \$(ARCHNAME) - -# -# uncomment to enable multiple interpreters. This is need for fork() -# emulation. -# -#USE_MULTI = define - -# -# Beginnings of interpreter cloning/threads; still very incomplete. -# This should be enabled to get the fork() emulation. This needs -# USE_MULTI as well. -# -#USE_ITHREADS = define - -# -# uncomment to enable the implicit "host" layer for all system calls -# made by perl. This needs USE_MULTI above. This is also needed to -# get fork(). -# -#USE_IMP_SYS = define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_ITHREADS instead). -# -# uncomment to enable threads-capabilities. This is incompatible with -# USE_ITHREADS, and is only here for people who may have come to rely -# on the experimental Thread support that was in 5.005. -# -#USE_5005THREADS= define - -# -# WARNING! This option is deprecated and will eventually go away (enable -# USE_MULTI instead). -# -# uncomment next line if you want to use the PERL_OBJECT build option. -# DO NOT ENABLE unless you have legacy code that relies on the C++ -# CPerlObj class that was available in 5.005. This cannot be enabled -# if you ask for USE_5005THREADS above. -# -#USE_OBJECT = define - -# -# uncomment one of the following lines if you are using either -# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98) -# -#CCTYPE = MSVC20 -#CCTYPE = MSVC60 - -# -# uncomment next line if you want debug version of perl (big,slow) -# -#CFG = Debug - -# -# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler. -# It has patches that fix known bugs in older versions of MSVCRT.DLL. -# This currently requires VC 5.0 with Service Pack 3 or later. -# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/ -# and follow the directions in the package to install. -# -# Not recommended if you have VC 6.x and you're not running Windows 9x. -# -#USE_PERLCRT = define - -# -# uncomment to enable linking with setargv.obj under the Visual C -# compiler. Setting this options enables perl to expand wildcards in -# arguments, but it may be harder to use alternate methods like -# File::DosGlob that are more powerful. This option is supported only with -# Visual C. -# -#USE_SETARGV = define - -# -# if you have the source for des_fcrypt(), uncomment this and make sure the -# file exists (see README.win32). File should be located in the same -# directory as this file. -# -#CRYPT_SRC = fcrypt.c - -# -# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a -# library, uncomment this, and make sure the library exists (see README.win32) -# Specify the full pathname of the library. -# -#CRYPT_LIB = fcrypt.lib - -# -# set this if you wish to use perl's malloc -# WARNING: Turning this on/off WILL break binary compatibility with extensions -# you may have compiled with/without it. Be prepared to recompile all -# extensions if you change the default. Currently, this cannot be enabled -# if you ask for USE_IMP_SYS above. -# -#PERL_MALLOC = define - -# -# set the install locations of the compiler include/libraries -# Running VCVARS32.BAT is *required* when using Visual C. -# Some versions of Visual C don't define MSVCDIR in the environment, -# so you may have to set CCHOME explicitly (spaces in the path name should -# not be quoted) -# -#CCHOME = f:\msvc20 -CCHOME = $(MSVCDIR) -CCINCDIR = $(CCHOME)\include -CCLIBDIR = $(CCHOME)\lib - -# -# Additional compiler flags can be specified here. -# - -# -# This should normally be disabled. Adding -DPERL_POLLUTE enables support -# for old symbols by default, at the expense of extreme pollution. You most -# probably just want to build modules that won't compile with -# perl Makefile.PL POLLUTE=1 -# instead of enabling this. Please report such modules to the respective -# authors. -# -#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE - -# -# This should normally be disabled. Enabling it will disable the File::Glob -# implementation of CORE::glob. -# -#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB - -# -# This should normally be disabled. Enabling it causes perl to read scripts -# in text mode (which is the 5.005 behavior) and will break ByteLoader. -#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS - -# -# specify semicolon-separated list of extra directories that modules will -# look for libraries (spaces in path names need not be quoted) -# -EXTRALIBDIRS = - -# -# set this to your email address (perl will guess a value from -# from your loginname and your hostname, which may not be right) -# -#EMAIL = - -## -## Build configuration ends. -## - -##################### CHANGE THESE ONLY IF YOU MUST ##################### - -!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == "" -D_CRYPT = undef -!ELSE -D_CRYPT = define -CRYPT_FLAG = -DHAVE_DES_FCRYPT -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -PERL_MALLOC = undef -USE_5005THREADS = undef -USE_MULTI = undef -USE_IMP_SYS = define -!ENDIF - -!IF "$(PERL_MALLOC)" == "" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "" -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_5005THREADS)" == "define" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "define" -PERL_MALLOC = undef -!ENDIF - -!IF "$(USE_MULTI)" == "" -USE_MULTI = undef -!ENDIF - -!IF "$(USE_OBJECT)" == "" -USE_OBJECT = undef -!ENDIF - -!IF "$(USE_ITHREADS)" == "" -USE_ITHREADS = undef -!ENDIF - -!IF "$(USE_IMP_SYS)" == "" -USE_IMP_SYS = undef -!ENDIF - -!IF "$(USE_PERLCRT)" == "" -USE_PERLCRT = undef -!ENDIF - -!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef" -USE_MULTI = define -!ENDIF - -!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef" -USE_MULTI = define -USE_5005THREADS = undef -!ENDIF - -!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT -!ENDIF - -!IF "$(USE_IMP_SYS)" != "undef" -BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS -!ENDIF - -!IF "$(PROCESSOR_ARCHITECTURE)" == "" -PROCESSOR_ARCHITECTURE = x86 -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object -!ELSE -!IF "$(USE_5005THREADS)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread -!ELSE -!IF "$(USE_MULTI)" == "define" -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi -!ELSE -ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE) -!ENDIF -!ENDIF -!ENDIF - -!IF "$(USE_ITHREADS)" == "define" -ARCHNAME = $(ARCHNAME)-thread -!ENDIF - -# Visual Studio 98 specific -!IF "$(CCTYPE)" == "MSVC60" - -# VC 6.0 can load the socket dll on demand. Makes the test suite -# run in about 10% less time. -DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib - -# VC 6.0 seems capable of compiling perl correctly with optimizations -# enabled. Anything earlier fails tests. -!IF "$(CFG)" == "" -CFG = Optimize -!ENDIF -!ENDIF - -ARCHDIR = ..\lib\$(ARCHNAME) -COREDIR = ..\lib\CORE -AUTODIR = ..\lib\auto -LIBDIR = ..\lib -EXTDIR = ..\ext -PODDIR = ..\pod -EXTUTILSDIR = $(LIBDIR)\ExtUtils - -# -INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin -INST_BIN = $(INST_SCRIPT)$(INST_ARCH) -INST_LIB = $(INST_TOP)$(INST_VER)\lib -INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) -INST_COREDIR = $(INST_ARCHLIB)\CORE -INST_POD = $(INST_LIB)\pod -INST_HTML = $(INST_POD)\html - -# -# Programs to compile, build .lib files and link -# - -CC = cl -LINK32 = link -LIB32 = $(LINK32) -lib -RSC = rc - -# -# Options -# - -INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX -DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG) -LOCDEFS = -DPERLDLL -DPERL_CORE -SUBSYS = console -CXX_FLAG = -TP -GX - -!IF "$(USE_PERLCRT)" != "define" -LIBC = msvcrt.lib -!ELSE -LIBC = PerlCRT.lib -!ENDIF - -PERLEXE_RES = -PERLDLL_RES = - -!IF "$(CFG)" == "Debug" -! IF "$(CCTYPE)" == "MSVC20" -OPTIMIZE = -Od -MD -Z7 -DDEBUGGING -! ELSE -OPTIMIZE = -Od -MD -Zi -DDEBUGGING -! ENDIF -LINK_DBG = -debug -pdb:none -!ELSE -! IF "$(CFG)" == "Optimize" -# -O1 yields smaller code, which turns out to be faster than -O2 -#OPTIMIZE = -O2 -MD -DNDEBUG -OPTIMIZE = -O1 -MD -DNDEBUG -! ELSE -OPTIMIZE = -Od -MD -DNDEBUG -! ENDIF -LINK_DBG = -release -!ENDIF - -!IF "$(USE_OBJECT)" == "define" -OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG) -BUILDOPT = $(BUILDOPT) -DPERL_OBJECT -!ENDIF - -!IF "$(USE_PERLCRT)" != "define" -BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX -!ENDIF - -LIBBASEFILES = $(CRYPT_LIB) \ - oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ - comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ - netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \ - version.lib odbc32.lib odbccp32.lib - -# we add LIBC here, since we may be using PerlCRT.dll -LIBFILES = $(LIBBASEFILES) $(LIBC) - -CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \ - $(PCHFLAGS) $(OPTIMIZE) -LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ - -libpath:"$(INST_COREDIR)" \ - -machine:$(PROCESSOR_ARCHITECTURE) -OBJOUT_FLAG = -Fo -EXEOUT_FLAG = -Fe - -CFLAGS_O = $(CFLAGS) $(BUILDOPT) - -#################### do not edit below this line ####################### -############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## - -o = .obj - -# -# Rules -# - -.SUFFIXES : .c $(o) .dll .lib .exe .rc .res - -.c$(o): - $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< - -.y.c: - $(NOOP) - -$(o).dll: - $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ - -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL) - -.rc.res: - $(RSC) -i.. $< - -# -# various targets -PERLIMPLIB = ..\perl56.lib -PERLDLL = ..\perl56.dll - -MINIPERL = ..\miniperl.exe -MINIDIR = .\mini -PERLEXE = ..\perl.exe -WPERLEXE = ..\wperl.exe -GLOBEXE = ..\perlglob.exe -CONFIGPM = ..\lib\Config.pm -MINIMOD = ..\lib\ExtUtils\Miniperl.pm -X2P = ..\x2p\a2p.exe - -PL2BAT = bin\pl2bat.pl -GLOBBAT = bin\perlglob.bat - -UTILS = \ - ..\utils\h2ph \ - ..\utils\splain \ - ..\utils\dprofpp \ - ..\utils\perlbug \ - ..\utils\pl2pm \ - ..\utils\c2ph \ - ..\utils\h2xs \ - ..\utils\perldoc \ - ..\utils\perlcc \ - ..\pod\checkpods \ - ..\pod\pod2html \ - ..\pod\pod2latex \ - ..\pod\pod2man \ - ..\pod\pod2text \ - ..\pod\pod2usage \ - ..\pod\podchecker \ - ..\pod\podselect \ - ..\x2p\find2perl \ - ..\x2p\s2p \ - bin\exetype.pl \ - bin\runperl.pl \ - bin\pl2bat.pl \ - bin\perlglob.pl \ - bin\search.pl - -MAKE = nmake -nologo - -CFGSH_TMPL = config.vc -CFGH_TMPL = config_H.vc - -XCOPY = xcopy /f /r /i /d -RCOPY = xcopy /f /r /i /e /d -NOOP = @echo -NULL = - -# -# filenames given to xsubpp must have forward slashes (since it puts -# full pathnames in #line strings) -XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \ - -C++ -prototypes - -MICROCORE_SRC = \ - ..\av.c \ - ..\deb.c \ - ..\doio.c \ - ..\doop.c \ - ..\dump.c \ - ..\globals.c \ - ..\gv.c \ - ..\hv.c \ - ..\mg.c \ - ..\op.c \ - ..\perl.c \ - ..\perlapi.c \ - ..\perly.c \ - ..\pp.c \ - ..\pp_ctl.c \ - ..\pp_hot.c \ - ..\pp_sys.c \ - ..\regcomp.c \ - ..\regexec.c \ - ..\run.c \ - ..\scope.c \ - ..\sv.c \ - ..\taint.c \ - ..\toke.c \ - ..\universal.c \ - ..\utf8.c \ - ..\util.c \ - ..\xsutils.c - -EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c - -!IF "$(PERL_MALLOC)" == "define" -EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c -!ENDIF - -!IF "$(USE_OBJECT)" != "define" -EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c -!ENDIF - -WIN32_SRC = \ - .\win32.c \ - .\win32sck.c \ - .\win32thread.c - -!IF "$(CRYPT_SRC)" != "" -WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC) -!ENDIF - -DLL_SRC = $(DYNALOADER).c - -X2P_SRC = \ - ..\x2p\a2p.c \ - ..\x2p\hash.c \ - ..\x2p\str.c \ - ..\x2p\util.c \ - ..\x2p\walk.c - -CORE_NOCFG_H = \ - ..\av.h \ - ..\cop.h \ - ..\cv.h \ - ..\dosish.h \ - ..\embed.h \ - ..\form.h \ - ..\gv.h \ - ..\handy.h \ - ..\hv.h \ - ..\iperlsys.h \ - ..\mg.h \ - ..\nostdio.h \ - ..\op.h \ - ..\opcode.h \ - ..\perl.h \ - ..\perlapi.h \ - ..\perlsdio.h \ - ..\perlsfio.h \ - ..\perly.h \ - ..\pp.h \ - ..\proto.h \ - ..\regexp.h \ - ..\scope.h \ - ..\sv.h \ - ..\thread.h \ - ..\unixish.h \ - ..\utf8.h \ - ..\util.h \ - ..\warnings.h \ - ..\XSUB.h \ - ..\EXTERN.h \ - ..\perlvars.h \ - ..\intrpvar.h \ - ..\thrdvar.h \ - .\include\dirent.h \ - .\include\netdb.h \ - .\include\sys\socket.h \ - .\win32.h - -CORE_H = $(CORE_NOCFG_H) .\config.h - -MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj) -CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj) -WIN32_OBJ = $(WIN32_SRC:.c=.obj) -MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \ - $(MINIDIR)\miniperlmain$(o) \ - $(MINIDIR)\perlio$(o) -MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\) -MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) -DLL_OBJ = $(DLL_SRC:.c=.obj) -X2P_OBJ = $(X2P_SRC:.c=.obj) - -PERLDLL_OBJ = $(CORE_OBJ) -PERLEXE_OBJ = perlmain$(o) - -PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ) -#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ) - -!IF "$(USE_SETARGV)" != "" -SETARGV_OBJ = setargv$(o) -!ENDIF - -DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \ - Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \ - Sys/Hostname Storable -STATIC_EXT = DynaLoader -NONXS_EXT = Errno - -DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader -SOCKET = $(EXTDIR)\Socket\Socket -FCNTL = $(EXTDIR)\Fcntl\Fcntl -OPCODE = $(EXTDIR)\Opcode\Opcode -SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File -IO = $(EXTDIR)\IO\IO -POSIX = $(EXTDIR)\POSIX\POSIX -ATTRS = $(EXTDIR)\attrs\attrs -THREAD = $(EXTDIR)\Thread\Thread -B = $(EXTDIR)\B\B -RE = $(EXTDIR)\re\re -DUMPER = $(EXTDIR)\Data\Dumper\Dumper -ERRNO = $(EXTDIR)\Errno\Errno -PEEK = $(EXTDIR)\Devel\Peek\Peek -BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader -DPROF = $(EXTDIR)\Devel\DProf\DProf -GLOB = $(EXTDIR)\File\Glob\Glob -HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname -STORABLE = $(EXTDIR)\Storable\Storable - -SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll -FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll -OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll -SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll -IO_DLL = $(AUTODIR)\IO\IO.dll -POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll -ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll -THREAD_DLL = $(AUTODIR)\Thread\Thread.dll -B_DLL = $(AUTODIR)\B\B.dll -DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll -PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll -RE_DLL = $(AUTODIR)\re\re.dll -BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll -DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll -GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll -HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll -STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll - -ERRNO_PM = $(LIBDIR)\Errno.pm - -EXTENSION_C = \ - $(SOCKET).c \ - $(FCNTL).c \ - $(OPCODE).c \ - $(SDBM_FILE).c \ - $(IO).c \ - $(POSIX).c \ - $(ATTRS).c \ - $(THREAD).c \ - $(RE).c \ - $(DUMPER).c \ - $(PEEK).c \ - $(B).c \ - $(BYTELOADER).c \ - $(DPROF).c \ - $(GLOB).c \ - $(HOSTNAME).c \ - $(STORABLE).c - -EXTENSION_DLL = \ - $(SOCKET_DLL) \ - $(FCNTL_DLL) \ - $(OPCODE_DLL) \ - $(SDBM_FILE_DLL)\ - $(IO_DLL) \ - $(POSIX_DLL) \ - $(ATTRS_DLL) \ - $(DUMPER_DLL) \ - $(PEEK_DLL) \ - $(B_DLL) \ - $(RE_DLL) \ - $(THREAD_DLL) \ - $(BYTELOADER_DLL) \ - $(DPROF_DLL) \ - $(GLOB_DLL) \ - $(HOSTNAME_DLL) \ - $(STORABLE_DLL) - -EXTENSION_PM = \ - $(ERRNO_PM) - -POD2HTML = $(PODDIR)\pod2html -POD2MAN = $(PODDIR)\pod2man -POD2LATEX = $(PODDIR)\pod2latex -POD2TEXT = $(PODDIR)\pod2text - -CFG_VARS = \ - "INST_DRV=$(INST_DRV)" \ - "INST_TOP=$(INST_TOP)" \ - "INST_VER=$(INST_VER)" \ - "INST_ARCH=$(INST_ARCH)" \ - "archname=$(ARCHNAME)" \ - "cc=$(CC)" \ - "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \ - "cf_email=$(EMAIL)" \ - "d_crypt=$(D_CRYPT)" \ - "d_mymalloc=$(PERL_MALLOC)" \ - "libs=$(LIBFILES)" \ - "incpath=$(CCINCDIR:"=\")" \ - "libperl=$(PERLIMPLIB:..\=)" \ - "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \ - "libc=$(LIBC)" \ - "make=nmake" \ - "static_ext=$(STATIC_EXT)" \ - "dynamic_ext=$(DYNAMIC_EXT)" \ - "nonxs_ext=$(NONXS_EXT)" \ - "use5005threads=$(USE_5005THREADS)" \ - "useithreads=$(USE_ITHREADS)" \ - "usethreads=$(USE_5005THREADS)" \ - "usemultiplicity=$(USE_MULTI)" \ - "LINK_FLAGS=$(LINK_FLAGS:"=\")" \ - "optimize=$(OPTIMIZE:"=\")" - -# -# Top targets -# - -all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \ - $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM) - -$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c - -#------------------------------------------------------------ - -$(GLOBEXE) : perlglob$(o) - $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ - perlglob$(o) setargv$(o) - -perlglob$(o) : perlglob.c - -config.w32 : $(CFGSH_TMPL) - copy $(CFGSH_TMPL) config.w32 - -.\config.h : $(CFGH_TMPL) - -del /f config.h - copy $(CFGH_TMPL) config.h - -..\config.sh : config.w32 $(MINIPERL) config_sh.PL - $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh - -# this target is for when changes to the main config.sh happen -# edit config.{b,v,g}c and make this target once for each supported -# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`) -regen_config_h: - perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh - cd .. - -del /f perl.exe - perl configpm - cd win32 - -del /f $(CFGH_TMPL) - -mkdir $(COREDIR) - -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)" - rename config.h $(CFGH_TMPL) - -$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl - cd .. && miniperl configpm - if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) - $(XCOPY) ..\*.h $(COREDIR)\*.* - $(XCOPY) *.h $(COREDIR)\*.* - $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.* - $(RCOPY) include $(COREDIR)\*.* - $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \ - || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM) - -$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ) -<< - -$(MINIDIR) : - if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" - -$(MINICORE_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c - -$(MINIWIN32_OBJ) : $(CORE_NOCFG_H) - $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c - -# -DPERL_IMPLICIT_SYS needs C++ for perllib.c -# This is the only file that depends on perlhost.h, vmem.h, and vdir.h -!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef" -perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h - $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c -!ENDIF - -# 1. we don't want to rebuild miniperl.exe when config.h changes -# 2. we don't want to rebuild miniperl.exe with non-default config.h -$(MINI_OBJ) : $(CORE_NOCFG_H) - -$(WIN32_OBJ) : $(CORE_H) -$(CORE_OBJ) : $(CORE_H) -$(DLL_OBJ) : $(CORE_H) -$(X2P_OBJ) : $(CORE_H) - -perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl - $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \ - CCTYPE=$(CCTYPE) > perldll.def - -$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) - $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<< - $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES) -<< - $(XCOPY) $(PERLIMPLIB) $(COREDIR) - -$(MINIMOD) : $(MINIPERL) ..\minimod.pl - cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm - -..\x2p\a2p$(o) : ..\x2p\a2p.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c - -..\x2p\hash$(o) : ..\x2p\hash.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c - -..\x2p\str$(o) : ..\x2p\str.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c - -..\x2p\util$(o) : ..\x2p\util.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c - -..\x2p\walk$(o) : ..\x2p\walk.c - $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c - -$(X2P) : $(MINIPERL) $(X2P_OBJ) - $(MINIPERL) ..\x2p\find2perl.PL - $(MINIPERL) ..\x2p\s2p.PL - $(LINK32) -subsystem:console -out:$@ @<< - $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ) -<< - -perlmain.c : runperl.c - copy runperl.c perlmain.c - -perlmain$(o) : perlmain.c - $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c - -$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) - $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \ - $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) - copy $(PERLEXE) $(WPERLEXE) - $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - -$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) - if not exist $(AUTODIR) mkdir $(AUTODIR) - cd $(EXTDIR)\$(*B) - ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL - ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL - cd ..\..\win32 - $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL) - $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL) - cd $(EXTDIR)\$(*B) - $(XSUBPP) dl_win32.xs > $(*B).c - cd ..\..\win32 - -$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs - copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs - -$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs - cd $(EXTDIR)\Data\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(DPROF_DLL): $(PERLEXE) $(DPROF).xs - cd $(EXTDIR)\Devel\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(GLOB_DLL): $(PERLEXE) $(GLOB).xs - cd $(EXTDIR)\File\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(PEEK_DLL): $(PERLEXE) $(PEEK).xs - cd $(EXTDIR)\Devel\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(RE_DLL): $(PERLEXE) $(RE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(B_DLL): $(PERLEXE) $(B).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(THREAD_DLL): $(PERLEXE) $(THREAD).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(POSIX_DLL): $(PERLEXE) $(POSIX).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(IO_DLL): $(PERLEXE) $(IO).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs - cd $(EXTDIR)\Sys\$(*B) - ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\..\win32 - -$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL - cd $(EXTDIR)\$(*B) - ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl - $(MAKE) - cd ..\..\win32 - -doc: $(PERLEXE) - $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \ - --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \ - --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse - -utils: $(PERLEXE) $(X2P) - cd ..\utils - $(MAKE) PERL=$(MINIPERL) - cd ..\pod - copy ..\README.amiga .\perlamiga.pod - copy ..\README.cygwin .\perlcygwin.pod - copy ..\README.dos .\perldos.pod - copy ..\README.hpux .\perlhpux.pod - copy ..\README.machten .\perlmachten.pod - copy ..\README.os2 .\perlos2.pod - copy ..\vms\perlvms.pod .\perlvms.pod - copy ..\README.win32 .\perlwin32.pod - $(MAKE) -f ..\win32\pod.mak converters - cd ..\lib - $(PERLEXE) lib_pm.PL - cd ..\win32 - $(PERLEXE) $(PL2BAT) $(UTILS) - -distclean: clean - -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ - $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD) - -del /f *.def *.map - -del /f $(EXTENSION_DLL) $(EXTENSION_PM) - -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm - -del /f $(EXTDIR)\DynaLoader\dl_win32.xs - -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm - -del /f $(LIBDIR)\XSLoader.pm - -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm - -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm - -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm - -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm - -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm - -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm - -del /f $(LIBDIR)\File\Glob.pm - -del /f $(LIBDIR)\Storable.pm - -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO - -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread - -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B - -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data - -del /f $(PODDIR)\*.html - -del /f $(PODDIR)\*.bat - cd ..\utils - -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp - -del /f *.bat - cd ..\win32 - cd ..\x2p - -del /f find2perl s2p - -del /f *.bat - cd ..\win32 - -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new - -del /f $(CONFIGPM) - -del /f bin\*.bat - cd $(EXTDIR) - -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib - cd ..\win32 - -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR) - -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR) - -install : all installbare installhtml - -installbare : utils - $(PERLEXE) ..\installperl - if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* - $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* - $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* - -installhtml : doc - $(RCOPY) html\*.* $(INST_HTML)\*.* - -inst_lib : $(CONFIGPM) - copy splittree.pl .. - $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR) - $(RCOPY) ..\lib $(INST_LIB)\*.* - -minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils - $(XCOPY) $(MINIPERL) ..\t\perl.exe - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - attrib -r ..\t\*.* - copy test ..\t - cd ..\t - $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t - cd ..\win32 - -test-prep : all utils - $(XCOPY) $(PERLEXE) ..\t\$(NULL) - $(XCOPY) $(PERLDLL) ..\t\$(NULL) - $(XCOPY) $(GLOBEXE) ..\t\$(NULL) - -test : test-prep - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide : test-prep - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -test-wide-notty : test-prep - set PERL_SKIP_TTY_TEST=1 - set HARNESS_PERL_SWITCHES=-C - cd ..\t - $(PERLEXE) -I..\lib harness - cd ..\win32 - -clean : - -@erase miniperlmain$(o) - -@erase $(MINIPERL) - -@erase perlglob$(o) - -@erase perlmain$(o) - -@erase config.w32 - -@erase /f config.h - -@erase $(GLOBEXE) - -@erase $(PERLEXE) - -@erase $(WPERLEXE) - -@erase $(PERLDLL) - -@erase $(CORE_OBJ) - -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR) - -@erase $(WIN32_OBJ) - -@erase $(DLL_OBJ) - -@erase $(X2P_OBJ) - -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res - -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat - -@erase ..\x2p\*.exe ..\x2p\*.bat - -@erase *.ilk - -@erase *.pdb - -# Handy way to run perlbug -ok without having to install and run the -# installed perlbug. We don't re-run the tests here - we trust the user. -# Please *don't* use this unless all tests pass. -# If you want to report test failures, use "nmake nok" instead. -ok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" - -okfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok - -nok: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" - -nokfile: utils - $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok +#
+# Makefile to build perl on Windows NT using Microsoft NMAKE.
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl56.dll). Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "nmake install" to put your
+# newly built perl.
+#
+INST_DRV = c:
+INST_TOP = $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location. Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to. If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER = \5.6.0
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components. This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files. Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location. Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH = \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters. This is need for fork()
+# emulation.
+#
+#USE_MULTI = define
+
+#
+# Beginnings of interpreter cloning/threads; still very incomplete.
+# This should be enabled to get the fork() emulation. This needs
+# USE_MULTI as well.
+#
+#USE_ITHREADS = define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl. This needs USE_MULTI above. This is also needed to
+# get fork().
+#
+#USE_IMP_SYS = define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_ITHREADS instead).
+#
+# uncomment to enable threads-capabilities. This is incompatible with
+# USE_ITHREADS, and is only here for people who may have come to rely
+# on the experimental Thread support that was in 5.005.
+#
+#USE_5005THREADS= define
+
+#
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_MULTI instead).
+#
+# uncomment next line if you want to use the PERL_OBJECT build option.
+# DO NOT ENABLE unless you have legacy code that relies on the C++
+# CPerlObj class that was available in 5.005. This cannot be enabled
+# if you ask for USE_5005THREADS above.
+#
+#USE_OBJECT = define
+
+#
+# uncomment one of the following lines if you are using either
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
+#
+#CCTYPE = MSVC20
+#CCTYPE = MSVC60
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+#
+#CFG = Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT = define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV = define
+
+#
+# if you have the source for des_fcrypt(), uncomment this and make sure the
+# file exists (see README.win32). File should be located in the same
+# directory as this file.
+#
+#CRYPT_SRC = fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB = fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC = define
+
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+#CCHOME = f:\msvc20
+CCHOME = $(MSVCDIR)
+CCINCDIR = $(CCHOME)\include
+CCLIBDIR = $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution. You most
+# probably just want to build modules that won't compile with
+# perl Makefile.PL POLLUTE=1
+# instead of enabling this. Please report such modules to the respective
+# authors.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
+
+#
+# This should normally be disabled. Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled. Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT = $(BUILDOPT) -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS =
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL =
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT = undef
+!ELSE
+D_CRYPT = define
+CRYPT_FLAG = -DHAVE_DES_FCRYPT
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+PERL_MALLOC = undef
+USE_5005THREADS = undef
+USE_MULTI = undef
+USE_IMP_SYS = define
+!ENDIF
+
+!IF "$(PERL_MALLOC)" == ""
+PERL_MALLOC = undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == ""
+USE_5005THREADS = undef
+!ENDIF
+
+!IF "$(USE_5005THREADS)" == "define"
+USE_ITHREADS = undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+!ENDIF
+
+!IF "$(USE_MULTI)" == ""
+USE_MULTI = undef
+!ENDIF
+
+!IF "$(USE_OBJECT)" == ""
+USE_OBJECT = undef
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == ""
+USE_ITHREADS = undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" == ""
+USE_IMP_SYS = undef
+!ENDIF
+
+!IF "$(USE_PERLCRT)" == ""
+USE_PERLCRT = undef
+!ENDIF
+
+!IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+USE_MULTI = define
+!ENDIF
+
+!IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+USE_MULTI = define
+USE_5005THREADS = undef
+!ENDIF
+
+!IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
+
+!IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_SYS
+!ENDIF
+
+!IF "$(PROCESSOR_ARCHITECTURE)" == ""
+PROCESSOR_ARCHITECTURE = x86
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!ELSE
+!IF "$(USE_5005THREADS)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
+!ELSE
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+!ELSE
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+!ENDIF
+!ENDIF
+!ENDIF
+
+!IF "$(USE_ITHREADS)" == "define"
+ARCHNAME = $(ARCHNAME)-thread
+!ENDIF
+
+# Visual Studio 98 specific
+!IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand. Makes the test suite
+# run in about 10% less time.
+DELAYLOAD = -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled. Anything earlier fails tests.
+!IF "$(CFG)" == ""
+CFG = Optimize
+!ENDIF
+!ENDIF
+
+ARCHDIR = ..\lib\$(ARCHNAME)
+COREDIR = ..\lib\CORE
+AUTODIR = ..\lib\auto
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
+INST_COREDIR = $(INST_ARCHLIB)\CORE
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_POD)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+CC = cl
+LINK32 = link
+LIB32 = $(LINK32) -lib
+RSC = rc
+
+#
+# Options
+#
+
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -TP -GX
+
+!IF "$(USE_PERLCRT)" != "define"
+LIBC = msvcrt.lib
+!ELSE
+LIBC = PerlCRT.lib
+!ENDIF
+
+PERLEXE_RES =
+PERLDLL_RES =
+
+!IF "$(CFG)" == "Debug"
+! IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
+! ELSE
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING
+! ENDIF
+LINK_DBG = -debug -pdb:none
+!ELSE
+! IF "$(CFG)" == "Optimize"
+# -O1 yields smaller code, which turns out to be faster than -O2
+#OPTIMIZE = -O2 -MD -DNDEBUG
+OPTIMIZE = -O1 -MD -DNDEBUG
+! ELSE
+OPTIMIZE = -Od -MD -DNDEBUG
+! ENDIF
+LINK_DBG = -release
+!ENDIF
+
+!IF "$(USE_OBJECT)" == "define"
+OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
+BUILDOPT = $(BUILDOPT) -DPERL_OBJECT
+!ENDIF
+
+!IF "$(USE_PERLCRT)" != "define"
+BUILDOPT = $(BUILDOPT) -DPERL_MSVCRT_READFIX
+!ENDIF
+
+LIBBASEFILES = $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
+ -libpath:"$(INST_COREDIR)" \
+ -machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG = -Fo
+EXEOUT_FLAG = -Fe
+
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o = .obj
+
+#
+# Rules
+#
+
+.SUFFIXES : .c $(o) .dll .lib .exe .rc .res
+
+.c$(o):
+ $(CC) -c -I$(<D) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.y.c:
+ $(NOOP)
+
+$(o).dll:
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+ -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+
+.rc.res:
+ $(RSC) -i.. $<
+
+#
+# various targets
+PERLIMPLIB = ..\perl56.lib
+PERLDLL = ..\perl56.dll
+
+MINIPERL = ..\miniperl.exe
+MINIDIR = .\mini
+PERLEXE = ..\perl.exe
+WPERLEXE = ..\wperl.exe
+GLOBEXE = ..\perlglob.exe
+CONFIGPM = ..\lib\Config.pm
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm
+X2P = ..\x2p\a2p.exe
+
+PL2BAT = bin\pl2bat.pl
+GLOBBAT = bin\perlglob.bat
+
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\dprofpp \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\perlcc \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\pod\pod2usage \
+ ..\pod\podchecker \
+ ..\pod\podselect \
+ ..\x2p\find2perl \
+ ..\x2p\s2p \
+ bin\exetype.pl \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
+
+MAKE = nmake -nologo
+
+CFGSH_TMPL = config.vc
+CFGH_TMPL = config_H.vc
+
+XCOPY = xcopy /f /r /i /d
+RCOPY = xcopy /f /r /i /e /d
+NOOP = @echo
+NULL =
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+ -C++ -prototypes
+
+MICROCORE_SRC = \
+ ..\av.c \
+ ..\deb.c \
+ ..\doio.c \
+ ..\doop.c \
+ ..\dump.c \
+ ..\globals.c \
+ ..\gv.c \
+ ..\hv.c \
+ ..\mg.c \
+ ..\op.c \
+ ..\perl.c \
+ ..\perlapi.c \
+ ..\perly.c \
+ ..\pp.c \
+ ..\pp_ctl.c \
+ ..\pp_hot.c \
+ ..\pp_sys.c \
+ ..\regcomp.c \
+ ..\regexec.c \
+ ..\run.c \
+ ..\scope.c \
+ ..\sv.c \
+ ..\taint.c \
+ ..\toke.c \
+ ..\universal.c \
+ ..\utf8.c \
+ ..\util.c \
+ ..\xsutils.c
+
+EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
+
+!IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
+!ENDIF
+
+!IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
+!ENDIF
+
+WIN32_SRC = \
+ .\win32.c \
+ .\win32sck.c \
+ .\win32thread.c
+
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
+DLL_SRC = $(DYNALOADER).c
+
+X2P_SRC = \
+ ..\x2p\a2p.c \
+ ..\x2p\hash.c \
+ ..\x2p\str.c \
+ ..\x2p\util.c \
+ ..\x2p\walk.c
+
+CORE_NOCFG_H = \
+ ..\av.h \
+ ..\cop.h \
+ ..\cv.h \
+ ..\dosish.h \
+ ..\embed.h \
+ ..\form.h \
+ ..\gv.h \
+ ..\handy.h \
+ ..\hv.h \
+ ..\iperlsys.h \
+ ..\mg.h \
+ ..\nostdio.h \
+ ..\op.h \
+ ..\opcode.h \
+ ..\perl.h \
+ ..\perlapi.h \
+ ..\perlsdio.h \
+ ..\perlsfio.h \
+ ..\perly.h \
+ ..\pp.h \
+ ..\proto.h \
+ ..\regexp.h \
+ ..\scope.h \
+ ..\sv.h \
+ ..\thread.h \
+ ..\unixish.h \
+ ..\utf8.h \
+ ..\util.h \
+ ..\warnings.h \
+ ..\XSUB.h \
+ ..\EXTERN.h \
+ ..\perlvars.h \
+ ..\intrpvar.h \
+ ..\thrdvar.h \
+ .\include\dirent.h \
+ .\include\netdb.h \
+ .\include\sys\socket.h \
+ .\win32.h
+
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
+WIN32_OBJ = $(WIN32_SRC:.c=.obj)
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
+ $(MINIDIR)\miniperlmain$(o) \
+ $(MINIDIR)\perlio$(o)
+MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ = $(DLL_SRC:.c=.obj)
+X2P_OBJ = $(X2P_SRC:.c=.obj)
+
+PERLDLL_OBJ = $(CORE_OBJ)
+PERLEXE_OBJ = perlmain$(o)
+
+PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
+!ENDIF
+
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
+ Sys/Hostname Storable
+STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
+
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+SOCKET = $(EXTDIR)\Socket\Socket
+FCNTL = $(EXTDIR)\Fcntl\Fcntl
+OPCODE = $(EXTDIR)\Opcode\Opcode
+SDBM_FILE = $(EXTDIR)\SDBM_File\SDBM_File
+IO = $(EXTDIR)\IO\IO
+POSIX = $(EXTDIR)\POSIX\POSIX
+ATTRS = $(EXTDIR)\attrs\attrs
+THREAD = $(EXTDIR)\Thread\Thread
+B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+PEEK = $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
+DPROF = $(EXTDIR)\Devel\DProf\DProf
+GLOB = $(EXTDIR)\File\Glob\Glob
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
+STORABLE = $(EXTDIR)\Storable\Storable
+
+SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
+FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
+OPCODE_DLL = $(AUTODIR)\Opcode\Opcode.dll
+SDBM_FILE_DLL = $(AUTODIR)\SDBM_File\SDBM_File.dll
+IO_DLL = $(AUTODIR)\IO\IO.dll
+POSIX_DLL = $(AUTODIR)\POSIX\POSIX.dll
+ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
+THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
+B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
+
+ERRNO_PM = $(LIBDIR)\Errno.pm
+
+EXTENSION_C = \
+ $(SOCKET).c \
+ $(FCNTL).c \
+ $(OPCODE).c \
+ $(SDBM_FILE).c \
+ $(IO).c \
+ $(POSIX).c \
+ $(ATTRS).c \
+ $(THREAD).c \
+ $(RE).c \
+ $(DUMPER).c \
+ $(PEEK).c \
+ $(B).c \
+ $(BYTELOADER).c \
+ $(DPROF).c \
+ $(GLOB).c \
+ $(HOSTNAME).c \
+ $(STORABLE).c
+
+EXTENSION_DLL = \
+ $(SOCKET_DLL) \
+ $(FCNTL_DLL) \
+ $(OPCODE_DLL) \
+ $(SDBM_FILE_DLL)\
+ $(IO_DLL) \
+ $(POSIX_DLL) \
+ $(ATTRS_DLL) \
+ $(DUMPER_DLL) \
+ $(PEEK_DLL) \
+ $(B_DLL) \
+ $(RE_DLL) \
+ $(THREAD_DLL) \
+ $(BYTELOADER_DLL) \
+ $(DPROF_DLL) \
+ $(GLOB_DLL) \
+ $(HOSTNAME_DLL) \
+ $(STORABLE_DLL)
+
+EXTENSION_PM = \
+ $(ERRNO_PM)
+
+POD2HTML = $(PODDIR)\pod2html
+POD2MAN = $(PODDIR)\pod2man
+POD2LATEX = $(PODDIR)\pod2latex
+POD2TEXT = $(PODDIR)\pod2text
+
+CFG_VARS = \
+ "INST_DRV=$(INST_DRV)" \
+ "INST_TOP=$(INST_TOP)" \
+ "INST_VER=$(INST_VER)" \
+ "INST_ARCH=$(INST_ARCH)" \
+ "archname=$(ARCHNAME)" \
+ "cc=$(CC)" \
+ "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
+ "cf_email=$(EMAIL)" \
+ "d_crypt=$(D_CRYPT)" \
+ "d_mymalloc=$(PERL_MALLOC)" \
+ "libs=$(LIBFILES)" \
+ "incpath=$(CCINCDIR:"=\")" \
+ "libperl=$(PERLIMPLIB:..\=)" \
+ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
+ "libc=$(LIBC)" \
+ "make=nmake" \
+ "static_ext=$(STATIC_EXT)" \
+ "dynamic_ext=$(DYNAMIC_EXT)" \
+ "nonxs_ext=$(NONXS_EXT)" \
+ "use5005threads=$(USE_5005THREADS)" \
+ "useithreads=$(USE_ITHREADS)" \
+ "usethreads=$(USE_5005THREADS)" \
+ "usemultiplicity=$(USE_MULTI)" \
+ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
+ "optimize=$(OPTIMIZE:"=\")"
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#------------------------------------------------------------
+
+$(GLOBEXE) : perlglob$(o)
+ $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
+
+perlglob$(o) : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+ copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL)
+ -del /f config.h
+ copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL
+ $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+ perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+ cd ..
+ -del /f perl.exe
+ perl configpm
+ cd win32
+ -del /f $(CFGH_TMPL)
+ -mkdir $(COREDIR)
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+ cd .. && miniperl configpm
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+ $(RCOPY) include $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
+ $(LINK32) -subsystem:console -out:$@ @<<
+ $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ)
+<<
+
+$(MINIDIR) :
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*F).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+!IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+!ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
+
+$(WIN32_OBJ) : $(CORE_H)
+$(CORE_OBJ) : $(CORE_H)
+$(DLL_OBJ) : $(CORE_H)
+$(X2P_OBJ) : $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
+ CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+ $(LINK32) -dll -def:perldll.def -base:0x28000000 -out:$@ @<<
+ $(LINK_FLAGS) $(DELAYLOAD) $(LIBFILES) $(PERLDLL_OBJ) $(PERLDLL_RES)
+<<
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+ cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+ $(MINIPERL) ..\x2p\find2perl.PL
+ $(MINIPERL) ..\x2p\s2p.PL
+ $(LINK32) -subsystem:console -out:$@ @<<
+ $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ)
+<<
+
+perlmain.c : runperl.c
+ copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(LINK_FLAGS) \
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+ copy $(PERLEXE) $(WPERLEXE)
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+ if not exist $(AUTODIR) mkdir $(AUTODIR)
+ cd $(EXTDIR)\$(*B)
+ ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+ ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+ cd ..\..\win32
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+ cd $(EXTDIR)\$(*B)
+ $(XSUBPP) dl_win32.xs > $(*B).c
+ cd ..\..\win32
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+ cd $(EXTDIR)\Data\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
+ cd $(EXTDIR)\Devel\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(GLOB_DLL): $(PERLEXE) $(GLOB).xs
+ cd $(EXTDIR)\File\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
+ cd $(EXTDIR)\Devel\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(RE_DLL): $(PERLEXE) $(RE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(B_DLL): $(PERLEXE) $(B).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(IO_DLL): $(PERLEXE) $(IO).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(HOSTNAME_DLL): $(PERLEXE) $(HOSTNAME).xs
+ cd $(EXTDIR)\Sys\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(STORABLE_DLL): $(PERLEXE) $(STORABLE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+doc: $(PERLEXE)
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+utils: $(PERLEXE) $(X2P)
+ cd ..\utils
+ $(MAKE) PERL=$(MINIPERL)
+ cd ..\pod
+ copy ..\README.amiga .\perlamiga.pod
+ copy ..\README.cygwin .\perlcygwin.pod
+ copy ..\README.dos .\perldos.pod
+ copy ..\README.hpux .\perlhpux.pod
+ copy ..\README.machten .\perlmachten.pod
+ copy ..\README.os2 .\perlos2.pod
+ copy ..\vms\perlvms.pod .\perlvms.pod
+ copy ..\README.win32 .\perlwin32.pod
+ $(MAKE) -f ..\win32\pod.mak converters
+ cd ..\lib
+ $(PERLEXE) lib_pm.PL
+ cd ..\win32
+ $(PERLEXE) $(PL2BAT) $(UTILS)
+
+distclean: clean
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+ $(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
+ -del /f *.def *.map
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\File\Glob.pm
+ -del /f $(LIBDIR)\Storable.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
+ -del /f $(PODDIR)\*.html
+ -del /f $(PODDIR)\*.bat
+ cd ..\utils
+ -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc dprofpp
+ -del /f *.bat
+ cd ..\win32
+ cd ..\x2p
+ -del /f find2perl s2p
+ -del /f *.bat
+ cd ..\win32
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f $(CONFIGPM)
+ -del /f bin\*.bat
+ cd $(EXTDIR)
+ -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
+ cd ..\win32
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : utils
+ $(PERLEXE) ..\installperl
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+ $(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+ $(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ attrib -r ..\t\*.*
+ copy test ..\t
+ cd ..\t
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+ cd ..\win32
+
+test-prep : all utils
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+
+test : test-prep
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+test-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+test-wide : test-prep
+ set HARNESS_PERL_SWITCHES=-C
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+test-wide-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1
+ set HARNESS_PERL_SWITCHES=-C
+ cd ..\t
+ $(PERLEXE) -I..\lib harness
+ cd ..\win32
+
+clean :
+ -@erase miniperlmain$(o)
+ -@erase $(MINIPERL)
+ -@erase perlglob$(o)
+ -@erase perlmain$(o)
+ -@erase config.w32
+ -@erase /f config.h
+ -@erase $(GLOBEXE)
+ -@erase $(PERLEXE)
+ -@erase $(WPERLEXE)
+ -@erase $(PERLDLL)
+ -@erase $(CORE_OBJ)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+ -@erase $(WIN32_OBJ)
+ -@erase $(DLL_OBJ)
+ -@erase $(X2P_OBJ)
+ -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@erase ..\x2p\*.exe ..\x2p\*.bat
+ -@erase *.ilk
+ -@erase *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "nmake nok" instead.
+ok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
|