summaryrefslogtreecommitdiff
path: root/makedepend.SH
Commit message (Collapse)AuthorAgeFilesLines
* The section needs to be in the makedepend scriptJarkko Hietaniemi2002-03-151-4/+4
| | | | | (from Jan-Erik Karlsson). p4raw-id: //depot/perl@15231
* Remove obsolete hack.Jarkko Hietaniemi2002-03-021-3/+0
| | | p4raw-id: //depot/perl@14947
* makedepend VOS fix from Paul Green.Jarkko Hietaniemi2002-01-021-17/+8
| | | p4raw-id: //depot/perl@14018
* [ID 20011108.092] makedepend bug with new gccAlexander Klimov2001-11-081-0/+2
| | | | | Message-Id: <Pine.GSO.4.40.0111080952570.12110-100000@dardar.wisdom.weizmann.ac.il> p4raw-id: //depot/perl@12894
* If using gcc -B/foo/bar makedepend would giveJarkko Hietaniemi2001-08-101-1/+2
| | | | | unnecessary warnings about unused -B/foo/bar. p4raw-id: //depot/perl@11627
* The problem described in 20010514.031 still wasn'tJarkko Hietaniemi2001-05-151-2/+2
| | | | | | | fully cured, there were remnants of $CONFIG when $CONFIGDOTSH was expected. Now renamed to PERL_CONFIG_SH to avoid future conflicts. p4raw-id: //depot/perl@10113
* makedepend.SH patch for AmigaOS from Jan-Erik Karlsson;Jarkko Hietaniemi2001-04-241-0/+4
| | | | | the $cat must have an absolute path. p4raw-id: //depot/perl@9827
* 'no *POSIX' Patch speeding up make on BS2000 Thomas Dorner2001-03-081-1/+5
| | | | | Message-ID: <6727B1DACFCDD311A757009027CA8D69010A88CB@Ex02.inhouse.start.de> p4raw-id: //depot/perl@9079
* small os390 tweaks (from Peter Prymmer)Gurusamy Sarathy2000-04-241-15/+30
| | | p4raw-id: //depot/perl@5930
* nit from Spider BoardmanJarkko Hietaniemi2000-03-021-0/+1
| | | p4raw-id: //depot/cfgperl@5441
* two small patches from Peter Prymmer <pvhp@forte.com>Gurusamy Sarathy1999-12-031-0/+3
| | | p4raw-id: //depot/perl@4627
* rename cygwin32 to cygwin (from Eric Fifer <EFifer@sanwaint.com>)Gurusamy Sarathy1999-08-011-1/+1
| | | p4raw-id: //depot/perl@3852
* integrate cfgperl contents into mainlineGurusamy Sarathy1999-07-261-33/+18
| | | p4raw-id: //depot/perl@3774
* First steps of making builds outside the sourceJarkko Hietaniemi1999-07-251-18/+33
| | | | | | | | directory possible. These should get us as far as miniperl, then building DynaLoader falls into tiny twinkling pieces as MakeMaker knows nothing of VPATH mindset. p4raw-id: //depot/cfgperl@3735
* cygwin32 update (untested adaptation of patch against 5.005_03)Alexander Smishlajev1999-05-101-1/+5
| | | | | | Message-ID: <37230365.5F68B460@turnhere.com> Subject: [PATCH]5.005_03 (CORE) cygwin32 port p4raw-id: //depot/perl@3358
* Configure regen.Jarkko Hietaniemi1999-04-021-2/+2
| | | | | | | Add llseek + offset_t probing. Change CONFIG to CONFIGDOTSH. 'unset foo' is unportable, use foo=''. p4raw-id: //depot/cfgperl@3201
* makedependIlya Zakharevich1999-01-211-1/+5
| | | | | | To: Mailing list Perl5 <perl5-porters@perl.org> Message-ID: <19990121020827.A25509@monk.mps.ohio-state.edu> p4raw-id: //depot/cfgperl@2661
* NetBSD update, based on patches from the NetBSD packages system.Jarkko Hietaniemi1999-01-191-0/+1
| | | p4raw-id: //depot/cfgperl@2650
* patches for perl 5.005_51 under U/WINJoe Buehler1998-09-231-1/+6
| | | | | Message-ID: <yd37lzro5jb.fsf@pandora.hekimian.com> p4raw-id: //depot/perl@1823
* generic Configure mods and HAS_GROUP additions to help MiNT/MPEix/MVSJarkko Hietaniemi1998-07-121-3/+8
| | | | | | Message-Id: <199807111451.RAA27010@alpha.hut.fi> Subject: M3 "generic" parts p4raw-id: //depot/perl@1451
* Configure patches -01 and -02 for 5.004_61.Andy Dougherty1998-03-051-1/+1
| | | p4raw-id: //depot/perl@783
* Re: ANNOUNCE: perl5.004_60 Configure patch is availableAndy Dougherty1998-02-251-1/+1
| | | p4raw-id: //depot/perl@575
* Major changes to the DOS/djgpp port (including threading):Molnar Laszlo1997-12-171-1/+1
| | | | | Subject: Re: dos-djgpp port not in perl 5.004_54 p4raw-id: //depot/perl@373
* [inseparable changes from patch to perl 5.004_04]perl-5.004_04Perl 5 Porters1997-09-051-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [editor's note: this one imported like a charm!] TESTS - Subject: Improve pragma/locale test 102 - and don't fail, just warn From: Jarkko Hietaniemi <jhi@anna.in-berlin.de> Files: t/pragma/locale.t Subject: Invalid test output in t/op/taint.t in trial 1 From: Dan Sugalski <sugalsd@lbcc.cc.or.us> Files: t/op/taint.t t/op/taint.t prints out invalid ok messages for tests it skips. Rather than printing "ok 136" it prints "136 ok". p5p-msgid: 3.0.3.32.19970919160918.00857a50@stargate.lbcc.cc.or.us UTILITIES - Subject: Perldoc tiny patch to avoid $0 From: Ilya Zakharevich <ilya@math.ohio-state.edu> Files: utils/perldoc.PL Msg-ID: 199709122141.RAA16846@monk.mps.ohio-state.edu (applied based on p5p patch as commit 0b166b6635cf199f072db516b2a523ee659394d5) Subject: h2ph broken in 5.004_02 From: David Mazieres <dm@reeducation-labor.lcs.mit.edu> Files: utils/h2ph.PL Msg-ID: 199708201700.KAA02621@www.chapin.edu (applied based on p5p patch as commit 4a8e146e38ec2045f1f817a7cb578e1b1f80f39f) Subject: add key_t caddr_t to h2ph From: Tony Sanders <sanders@bsdi.com> Files: eg/sysvipc/ipcsem utils/h2ph.PL Msg-ID: 199708272301.RAA12803@austin.bsdi.com (applied based on p5p patch as commit 0806a92ffc3a74ca70aa81051cdf2a306cd0a8af) Subject: perldoc search ., lib and blib/* if -f 'Makefile.PL' From: Tim Bunce <Tim.Bunce@ig.co.uk> Files: utils/perldoc.PL Subject: perldoc finds wrong pod2man (from perldoc source) # We must look both in @INC for library modules and in PATH # for executables, like h2xs or perldoc itself. Unfortunately, searching PATH for installed perl executables like pod2man is INCORRECT. perldoc should start by searching the directory it was executed from, which might not be in the PATH at all. Credited: Joseph "Moof-in'" Hall <joseph@cscaper.com> p5p-msgid: 199708251732.KAA19299@gadget.cscaper.com Subject: 5.004m4t1: perlbug: NIS domainname gets into wrong places From: Andreas J. Koenig <koenig@anna.mind.de> Files: utils/perlbug.PL Msg-ID: sfcg1qy38as.fsf@anna.in-berlin.de (applied based on p5p patch as commit 41f926b844140b7f7eaa9302113e45df3a9f9ff4) Subject: add better local patch info to perlbug From: Tim Bunce <Tim.Bunce@ig.co.uk> Files: utils/perlbug.PL Subject: perldoc - suggest modules if requested module not found From: Anthony David <adavid@netinfo.com.au> Files: utils/perldoc.PL private-msgid: 3439CD83.6969@netinfo.com.au Subject: perldoc mail::foo tries to read binary /usr/ucb/mail From: Tim Bunce <Tim.Bunce@ig.co.uk> Files: utils/perldoc.PL Subject: perldoc weirdness perldoc mail::imap yields: {joseph}:79% perldoc mail::foo can't open /usr/ucb/mail: Permission denied at ./pod2man line 362. Credited: Joseph "Moof-in'" Hall <joseph@cscaper.com> p5p-msgid: 199710082014.NAA00808@gadget.cscaper.com Subject: perldoc -f setpwent (for example) returns no descriptive text From: Tim Bunce <Tim.Bunce@ig.co.uk> Files: utils/perldoc.PL Subject: perldoc diffs: don't search auto - much faster From: "Joseph N. Hall" <joseph@5sigma.com> Files: utils/perldoc.PL Msg-ID: MailDrop1.2d7dPPC.971012211957@screechy.cscaper.com (applied based on p5p patch as commit 62b753c6ae4ab9bf22fbb6ec7ceac820bcef8fe4)
* perl 5.003_07: makedepend.SHIlya Zakharevich1996-10-091-0/+4
| | | | | | | | | Date: Wed, 9 Oct 1996 22:32:22 -0400 (EDT) From: Ilya Zakharevich <ilya@math.ohio-state.edu> weed out perl_exp.SH, config_h.SH (They have these funny names to avoid names like perl.exp.SH with more than two '.' Such names are illegal on some systems.)
* perl 5.003_06: makedepend.SHPerl 5 Porters1996-10-031-0/+6
| | | | | | | Add explicit $touch $firstmakefile for QNX which apparently preserves modification times for a 'cp' command. I worry, though, that touch might not be portable to OS/2. If it is, then I'll remove the fancy case statement.
* perl 5.003_05: makedepend.SHPerl 5 Porters1996-09-071-3/+3
| | | | | This patch eliminates "\|" in sed patterns in makedepend.SH, since they're not really needed anyway in this one case.
* Use Configure's $sh and $make_set_make variables.Perl 5 Porters1996-08-191-6/+3
|
* perl 5.003_02: [no incremental changelog available]Larry Wall1996-08-101-2/+4
|
* perl 5.003_01: makedepend.SHPerl 5 Porters1996-07-101-2/+8
| | | | | Allow for different shell names Delete old version of file before copying in new version
* Update for OS/2 support: variables for file extensions and namesPerl 5 Porters1996-03-151-10/+17
|
* This is my patch patch.1n for perl5.001.perl-5.001nAndy Dougherty1995-10-311-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To apply, change to your perl directory, run the command above, then apply with patch -p1 -N < thispatch. This is a consolidation patch. It contains many of the most commonly applied or agreed-to patches that have been circulating since patch.1m. It also changes the 'unofficial patchlevel' in perl.c. There are some problems (see items marked with '***'). I will attempt to address those in a patch.1o in a few days. This patch contains the following packages: My Jumbo Configure patch vs. 1m, with subsequent patches 1, 2, and 3. Mainly, this provides easier use of local libraries, documents the installation process in a new INSTALL file, moves important questions towards the beginning, and improves detection of signal names (mostly for Linux). xsubpp-1.922. Patches from Larry: eval "1" memory leak patch (as modified by GSAR to apply to 5.001m). NETaa14551 Infinite loop in formats, NETaa13729 scope.c patch (fixed problems on AIX and others) NETaa14138 "substr() & s///" (pp_hot.c) Patches from ftp.perl.com: ftp://ftp.perl.com/pub/perl/src/patches/closure-bug.patch, version of 20 Sep 1995 Includes fix for NETaa14347 (32k limit in regex), and other fixes. ftp://ftp.perl.com/pub/perl/src/patches/debugger.patch, version of 27 Aug 1995 ftp://ftp.perl.com/pub/perl/src/patches/glob-undef.patch, version of 4 Sep 1995 NETaa14421 $_ doesn't undef ftp://ftp.perl.com/pub/perl/src/patches/op-segfault.patch, version of 21 Aug 1995 ftp://ftp.perl.com/pub/perl/src/patches/warn-ref-hash-key.patch, version of 5 Jun 1995 Tim Bunce's Jumbo DynaLoader patch for Perl5.001m, which is NETaa14636 Jumbo DynaLoader patch for Perl5.001m, and Additional patch for NETaa14636 Jumbo DynaLoader patch for Perl5.001m version of 09 Oct 1995. ***This needs some additional parentheses.*** MakeMaker-5.00. Supercedes NETaa13540 (VMS MakeMaker patches). (Updates minimod.PL as well.) ***This has a couple of minor problems. pod2man is run even if it isn't available. LD_RUN_PATH gets set to some mysterious values.*** NETaa14657 Paul Marquess Net::Ping patch. I've included Net-Ping-1.00. NETaa14661 Dean Roehrich DProf. Installed as ext/Devel/DProf. Configure should pick this up automatically. (5 Apr 1995 version.) NETaa13742 Jack Shirazi Socket in 5.001. I've also included his socket.t test in t/lib/socket.t. c2ph-1.7. Dean's perlapi patches of Oct 12, 1995, which superceded those of Oct 8, 1995. This is the one that did mv perlapi.pid perlxs.pod. NETaa14310 Tim Bunce A trivial patch for configpm (handy for shell scripts) DB_File-1.0 patch from Paul Marquess (pmarquess@bfsec.bt.co.uk) last modified 7th October 1995 version 1.0 Added or updated the following hints files: hints/hpux.sh hints/ncr_tower.sh hints/netbsd.sh hints/ultrix.sh Patch and enjoy. Andy Dougherty doughera@lafcol.lafayette.edu Dept. of Physics Lafayette College, Easton PA 18042
* This is my patch patch.1i for perl5.001.Andy Dougherty1995-05-301-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To apply, change to your perl directory, run the commands above, then apply with patch -p1 -N < thispatch. After you apply this patch, I would recommend: rm config.sh sh Configure [whatever options you use] make depend make make test Here are the highlights: All pod documentation now installed, along with corresponding man pages, if possible (Configure allows you to change this). cppstdin no longer points back to the build directory. This necessitated two changes to the test suite: comp/cpp.t is now a front end that punts if cppstdin is not yet available (the old perl4 trick doesn't work for perl5). The op/misc.t test ./perl -P -e 'use POSIX;' has been dropped since I couldn't think of an elegant way to bypass it for systems that need the cppstdin wrapper. Grand autoload patch included (minus the installperl, lib/, and ext/ changes). The lib/ changes are in patch.1g, and the ext/ changes are in patch.1h. Better detection and use of stdio variants, especially on SVR4. Sarathy's consolidated patches (for ties) included. New filter stuff included. Three patches from Larry (gv.c, toke.c, pp_ctl.c) Patch and enjoy, Andy Dougherty doughera@lafcol.lafayette.edu Dept. of Physics Lafayette College Easton, PA 18042 Here's the file-by-file breakdown of what's included: Changes.Conf Document changes in the Configure & build process. Configure Upgrade to metaconfig PL55. Add /opt hierarchy to paths searched for programs. Tye McQueen's updated std stdio testing. Prompting for installation info for perl module pages. Add possible SITELIB to include site-specific include directories. By default this is disabled, but it seemed a neat idea now that the standard perl library is getting so big. Check that the compiler chosen exists and actually supports the options the user specified. Correctly sort multiple shared library version numbers. Use a compile & link test for gconvert(), dlopen(), and dlerror(). Do not include build directory name in cppstdin wrapper. MANIFEST Updated. Makefile.SH Reorganized a bit to support separate install.perl and install.man targets to use the new installman script and to accomodate those who don't want to install the man pages. Organize cleanup of .SH files a little better. No longer automatically make the pod/*.man files. This is done by installman only if requested. Include additional error messages and info for regenerating the automatically maintained header files. Add 'minitest' target. README Updated. README.vms Fix perl5-porters subscription info. config_H Updated. config_h.SH Updated. configpm Embedded pod. configure GNU configure-like front end to metaconfig's Configure. Only supports a few options. doio.c Updated to use new std stdio testing. embed.h Add new symbols for filtering. global.sym see embed.h. gv.c C<sub method;> patch from lwall. hints/README.hints Updated. hints/aux.sh Updated. hints/cxux.sh Updated. hints/epix.sh New file. hints/freebsd.sh Updated. hints/irix_4.sh Updated. hints/irix_5.sh Updated. hints/irix_6.sh Updated. hints/linux.sh Updated. hints/powerunix.sh Updated. installman New file to install pod/*.pod and lib/*.p(m|od) man pages. installperl Move installation of man pages over to installman script. Install pod/*.pod files in $privlib/pod/. Preserve timestamps on .a files. makedepend.SH Now includes . and .. in PATH to explicitly find cppstdin wrapper. opcode.h opcode.pl shmwrite fix. perl.c Changed unofficial patchlevel message. Included optional SITELIB directory. perl.h #include <memory.h> cryptswitch gone/filters added. EUNICE replaced by UNLINK_ALL_VERSIONS. Only matters for VMS. perldoc.SH New file. pod/perl.pod Describe where modpods are. pp_ctl.c sort bug fix from lwall. pp_hot.c csh glob bug fix from tchrist. Sarathy's consolidated "tie" patch for NETaa13753 N 2 trey pp_sys.c Emulate flock with lockf, if possible. Use new std stdio unit. proto.h Filters stuff. prototype for unlnk() is only needed #if UNLINK_ALL_VERSIONS sv.c Sarathy's consolidated "tie" patch for NETaa13753 N 2 trey Sarathy's consolidated patch for nested ties. Use new std stdio unit. t/comp/cpp.aux New file. This only gets called if cppstdin is avaiable. t/comp/cpp.t Calls cpp.aux test only if cppstdin is available. t/op/misc.t Drop perl -P -e 'use POSIX;' test. it couldn't work on systems without the cppstdin wrapper installed, and is usually misleading when it fails anyway. toke.c filter stuff. fix for NETaa13798 from lwall. unixish.h undef UNLINK_ALL_VERSIONS since it's irrelevant for unix. util.c s/EUNICE/UNLINK_ALL_VERSIONS/ for the unlnk() function. vms/config.vms VMS updates from Charles Bailey. std stdio updates to match changes in perl sources. add UNLINK_ALL_VERSIONS constant, but leave it #undef. vms/ext/MM_VMS.pm vms/ext/VMS/stdio/stdio.xs vms/perlvms.pod vms/vms.c VMS updates from Charles Bailey. x2p/Makefile.SH Updated to match man page Configure questions. Slight clean-up on .SH targets. x2p/str.c Use new std stdio unit.
* perl5.000 patch.0j: fix minor portability and build problems remaining even ↵Andy Dougherty1995-02-071-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | after patches 0a through 0i Specifically, here's what's included: Configure Regenerated with metaconfig patchlevel 50. This changed a variety of things, mostly related to selecting and changing the installation prefix. Handle csh, sed, and byacc no matter what the setting of d_portable. (This was causing glob problems in patch.0i). Set d_portable to default to 'y'. It doesn't matter anyway, but gives people a warm fuzzy feeling. Remove useless d_group and d_passwd tests. Add check for <sys/stat.h>. Improve & generalize AIX version detection. Consider /opt/man/man1 as a possible place to install man pages. Be a little more robust about OS version changes when deciding if the output of uname -a has really changed. MANIFEST MANIFEST.new Added hints/mpeix.sh. README Tell users the Configure defaults are probably right. Makefile.SH Better detection of whether user has byacc. Use $(MAKE) instead of make. U/Loc_sed.U Works again with d_portable='define'. U/Myinit.U Set d_portable=define as default. U/d_byacc.U Detect whether user has byacc even if d_portable=define. U/d_csh.U Works again with d_portable='define'. U/d_group.U Empty file to avoid useless metaconfig test. U/d_passwd.U Empty file to avoid useless metaconfig test. U/dist.patch This file contains two minor updates to dist3 PL50 that were used to generage Configure. U/i_sysstat.U New test. See if sys/stat.h is available. config.H Updated. config_h.SH Updated to metaconfig patchlevel 50. ext/NDBM_File/Makefile.PL ext/ODBM_File/Makefile.PL Add -lucb for SVR4 systems. handy.h Protect agains g++-2.6.3, which predefines bool. g++ can be used to compile an extension, but not perl itself. Still, the extension will #include "perl.h", which eventually gets "handy.h", which #define's bool. If this happens to you, add -DHAS_BOOL to your ccflags in your extension, or else ensure that _G_config.h is #include'd before perl.h. (_G_config.h will define _G_HAVE_BOOL, if indeed your version of g++ has bool.) hints/aix.sh Updated. Handles AIX 3.2.x and 4.1. Comments included! hints/hpux_9.sh Updated. hints/irix_4.sh Updated. Includes comments for IRIX 4.0.4 hints/linux.sh Updated. Beginnings of ELF support added, but completely untested. hints/mpeix.sh New hint file. hints/solaris_2.sh Useless ccflags="$ccflags" line removed. hints/svr4.sh Updated. installperl Doesn't use Config anymore (it already reads config.sh directly. That's probably backwards, but, oh well. Install perl.exp for AIX. lib/ExtUtils/MakeMaker.pm Upgraded from 4.01 to 4.03. makedepend.SH Use $MAKE instead of plain make. Index: op.c Remove overlapping strcpy(). perl.h Add test for <sys/stat.h>. Delete unused VOIDSIG stuff. Delete unused typedef struct lstring Lstring; perl_exp.SH Add safexxxx calls. pp_sys.c Delete wayward break in HAS_ALARM section. proto.h Change true and false (!) in function prototypes to please g++-2.6.3, which has true and false built in. (See notes for handy.h.) Index: unixish.h Long-overdue housekeeping. HAS_GROUP and HAS_PASSWD are always defined. util.c Yet another (char*) cast for bcmp. vms/config.vms Changed comments to match unixish.h. writemain.SH Now correctly handles nested static extensions. Recent MakeMakers have moved where they get built. x2p/a2p.h More definitions that will doubtless cause trouble somewhere else. x2p/a2py.c x2p/walk.c Remove unprotected char *strchr();
* perl5.000 patch.0i: fix glaring mistakes in patches a-hAndy Dougherty1995-01-261-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does the following things: 1. Fix various bonehead errors I introduced in patches a-g. 2. Incorporate MakeMaker changes to bring it up to version 4.01 (mostly). 3. Stick in things I forgot in patches a-g (e.g. AIX). 4. Some minor additional cleanup in x2p/ for even pickier compilers. 5. More hints updates (hpux and next). 6. Include newest dl_hpux.xs. I didn't have time to 1. Fix the overlapping strcpy() in op.c 2. Restore h2xs to Larry's original design to process <>. 3. take out unnecessary "use Config" in installperl. 4. Add in vms patches. I forgot to [If I remembered what i forgot, I wouldn't have forgotten it. :] I deliberately decided *not* to 1. Touch pod/* 2. deal with overloading Specifically, here's what's included: Configure Regenerated to be sure it's up-to-date. Makefile.SH Build extension libraries right into lib/auto/whatever. Don't set CCCDLFLAGS since we don't use it anyway. Take care to avoid modifying lib/Config.pm without reason Visit DynaLoader for `make clean'. (Previously only did so for `make realclean'.) @echo "Note that make realclean does not delete config.sh" Include config.h dependency. U/i_db.U config_h.SH config.H Remove unwanted quotes around db_hashtype and db_prefixtype. configpm Allow specification of alternate name for lib/Config.pm, so the makefile mv-if-diff trick saves needless re-making. ext/DynaLoader/DynaLoader.pm Updated warning messages and comments. ext/DynaLoader/dl_hpux.xs Updated to version 2.1. Now uses bootstrap files. ext/util/make_ext Explicitly use #!/bin/sh to start it up. This is useful for testing make_ext. Improve & simplify Nested::Extension::Processing. More robust handling of `make clean'. hints/hpux_9.sh Support both the bundled and unbundled compilers. hints/next_3_2.sh Back to using -posix rather than POSIX_SOURCE. And that only for ext/POSIX/POSIX.xs. installperl Special ranlib treatment for NeXT, which gets confused about timestamps in libraries, even when you just copy the library. Supply missing '$' in samepath() function. lib/AutoSplit.pm New parameters. lib/ExtUtils/MakeMaker.pm Upgraded from 3.8 to 4.01. lib/ExtUtils/xsubpp Documentation changed from man to pod. lib/Getopt/Long.pm Avoid typo warning. Drop unused $optx. lib/Text/Tabs.pm Fix package name. makedepend.SH Explicitly start with $startsh. Catch cpp that prints # <stdin> instead of line numbers. perl.h Fix bonehead mistake that ended up calling my_fmod even if not needed. perl_exp.SH also add symbols from interp.sym proto.h Delete 2 redundant prototypes (newBINOP and newUNOP). util.c Add (char *) casts to unsigned char args to bcmp. x2p/a2p.h Rearrange order of <string?.h> and bcopy & bzero stuff. Change a few function prototypes to void, to reflect actual usage. x2p/a2py.c Change a few function types to void, to reflect actual usage. x2p/handy.h Make *alloc declarations match those in x2p/util.c. x2p/util.c Make *alloc declarations match those in x2p/handy.h. x2p/walk.c Add a (Size_t) cast for comparison of 1 to the result of strlen(). Thanks to all who's work is included here. Little of it is mine.
* perl 5.000perl-5.000Larry Wall1994-10-171-54/+29
| | | | | | | | | | | [editor's note: this commit combines approximate 4 months of furious releases of Andy Dougherty and Larry Wall - see pod/perlhist.pod for details. Andy notes that; Alas neither my "Irwin AccuTrack" nor my DC 600A quarter-inch cartridge backup tapes from that era seem to be readable anymore. I guess 13 years exceeds the shelf life for that backup technology :-(. ]
* perl 5.0 alpha 9perl-5a9Larry Wall1994-05-041-3/+8
| | | | [editor's note: the sparc executables have not been included, and emacs backup files have been removed]
* perl 5.0 alpha 8Andy Dougherty1994-04-041-0/+1
| | | | | [the last one taken from the September '94 InfoMagic CD; a similar style of cleanup as the previous commits was performed]
* perl 5.0 alpha 2perl-5a2Larry Wall1993-10-071-1/+3
| | | | [editor's note: from history.perl.org. The sparc executables originally included in the distribution are not in this commit.]
* perl 4.0 patch 27: patch #20, continuedLarry Wall1992-06-081-6/+20
| | | | See patch #20.
* perl 4.0 patch 18: patch #11, continuedLarry Wall1991-11-051-2/+6
| | | | See patch #11.
* perl 4.0 patch 7: patch #4, continuedLarry Wall1991-06-061-24/+30
| | | | See patch #4.
* perl 4.0.00: (no release announcement available)perl-4.0.00Larry Wall1991-03-211-6/+4
| | | | So far, 4.0 is still a beta test version. For the last production version, look in pub/perl.3.0/kits@44.
* perl 3.0 patch #3 Patch #2 continuedLarry Wall1989-11-101-16/+6
|
* perl 3.0: (no announcement message available)perl-3.000Larry Wall1989-10-181-8/+7
| | | | | | | | | | | | | | A few of the new features: (18 Oct) * Perl can now handle binary data correctly and has functions to pack and unpack binary structures into arrays or lists. You can now do arbitrary ioctl functions. * You can now pass things to subroutines by reference. * Debugger enhancements. * An array or associative array may now appear in a local() list. * Array values may now be interpolated into strings. * Subroutine names are now distinguished by prefixing with &. You can call subroutines without using do, and without passing any argument list at all. * You can use the new -u switch to cause perl to dump core so that you can run undump and produce a binary executable image. Alternately you can use the "dump" operator after initializing any variables and such. * You can now chop lists. * Perl now uses /bin/csh to do filename globbing, if available. This means that filenames with spaces or other strangenesses work right. * New functions: mkdir and rmdir, getppid, getpgrp and setpgrp, getpriority and setpriority, chroot, ioctl and fcntl, flock, readlink, lstat, rindex, pack and unpack, read, warn, dbmopen and dbmclose, dump, reverse, defined, undef.
* perl 2.0 (no announcement message available)perl-2.0Larry Wall1988-06-051-10/+21
| | | | | | | | | | | | | | | | | | | | | | | | Some of the enhancements from Perl1 included: * New regexp routines derived from Henry Spencer's. o Support for /(foo|bar)/. o Support for /(foo)*/ and /(foo)+/. o \s for whitespace, \S for non-, \d for digit, \D nondigit * Local variables in blocks, subroutines and evals. * Recursive subroutine calls are now supported. * Array values may now be interpolated into lists: unlink 'foo', 'bar', @trashcan, 'tmp'; * File globbing. * Use of <> in array contexts returns the whole file or glob list. * New iterator for normal arrays, foreach, that allows both read and write. * Ability to open pipe to a forked off script for secure pipes in setuid scripts. * File inclusion via do 'foo.pl'; * More file tests, including -t to see if, for instance, stdin is a terminal. File tests now behave in a more correct manner. You can do file tests on filehandles as well as filenames. The special filetests -T and -B test a file to see if it's text or binary. * An eof can now be used on each file of the <> input for such purposes as resetting the line numbers or appending to each file of an inplace edit. * Assignments can now function as lvalues, so you can say things like ($HOST = $host) =~ tr/a-z/A-Z/; ($obj = $src) =~ s/\.c$/.o/; * You can now do certain file operations with a variable which holds the name of a filehandle, e.g. open(++$incl,$includefilename); $foo = <$incl>; * Warnings are now available (with -w) on use of uninitialized variables and on identifiers that are mentioned only once, and on reference to various undefined things. * There is now a wait operator. * There is now a sort operator. * The manual is now not lying when it says that perl is generally faster than sed. I hope.
* perl 1.0 patch 13: fix for faulty patch 12, plus random portability glitchesKriton Kyrimis1988-02-011-2/+5
| | | | | | | | | | I botched patch #12, so that split(' ') only works on the first line of input due to unintended interference by the optimization that was added at the same time. Yes, I tested it, but only on one line of input. *Sigh* Some glitches have turned up on some of the rusty pig iron out there, so here are some unglitchifications.
* a "replacement" for awk and sedperl-1.0Larry Wall1987-12-181-0/+151
[ Perl is kind of designed to make awk and sed semi-obsolete. This posting will include the first 10 patches after the main source. The following description is lifted from Larry's manpage. --r$ ] Perl is a interpreted language optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information. It's also a good language for many system management tasks. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). It combines (in the author's opinion, anyway) some of the best features of C, sed, awk, and sh, so people familiar with those languages should have little difficulty with it. (Language historians will also note some vestiges of csh, Pascal, and even BASIC-PLUS.) Expression syntax corresponds quite closely to C expression syntax. If you have a problem that would ordinarily use sed or awk or sh, but it exceeds their capabilities or must run a little faster, and you don't want to write the silly thing in C, then perl may be for you. There are also translators to turn your sed and awk scripts into perl scripts.
View Lorry Controller Status