case $PERL_CONFIG_SH in '') if test -f config.sh then TOP=. else echo "Can't find config.sh."; exit 1 fi . $TOP/config.sh ;; esac case $CROSS_NAME in '') Makefile=Makefile ;; *) # if cross-compilation, the Makefile named accordingly Makefile=Makefile-cross-$CROSS_NAME . Cross/config-${CROSS_NAME}.sh ;; esac # H.Merijn Brand [17 Feb 2004] # This comment is just to ensure that Configure will find variables that # are removed/replaced in patches on blead, but are still needed in the # 5.8.x, 5.6.x and 5.005.x maintainance tracks. # metaconfig -m will scan all .SH files on this level (not deeper), and # not in x2p and other subfolders. This file is as good as any .SH # patch references # #22227 $baserev # #22302 $yacc $byacc # H.Merijn Brand [30 Oct 2004] # Mentioned for the same reason for future reference # #23434 $d_strlcat $d_strlcpy : This forces SH files to create target in same directory as SH file. : This is so that make depend always knows where to find SH derivatives. case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac linklibperl='$(LIBPERL)' linklibperl_nonshr='' shrpldflags='$(LDDLFLAGS)' ldlibpth='' DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB' DPERL_IS_MINIPERL='-DPERL_IS_MINIPERL' case "$useshrplib" in true) # Prefix all runs of 'miniperl' and 'perl' with # $ldlibpth so that ./perl finds *this* shared libperl. case "$LD_LIBRARY_PATH" in '') ldlibpth="LD_LIBRARY_PATH=`pwd`";; *) ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";; esac pldlflags="$cccdlflags" static_ldflags='' case "${osname}${osvers}" in next4*) ld=libtool lddlflags="-dynamic -undefined warning -framework System \ -compatibility_version 1 -current_version $patchlevel \ -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@" ;; rhapsody*|darwin*) shrpldflags="${ldflags} -dynamiclib \ -compatibility_version \ ${api_revision}.${api_version}.${api_subversion} \ -current_version \ ${revision}.${patchlevel}.${subversion} \ -install_name \$(shrpdir)/\$@" ;; cygwin*) shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000" linklibperl="-L. -lperl" ;; sunos*) linklibperl="-lperl" ;; netbsd*|freebsd[234]*|openbsd*|dragonfly*) linklibperl="-L. -lperl" ;; interix*) linklibperl="-L. -lperl" shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" ;; aix*) case "$cc" in gcc*) shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp" case "$osvers" in 3*) shrpldflags="$shrpldflags -e _nostart" ;; *) shrpldflags="$shrpldflags -Wl,-bnoentry" ;; esac shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" linklibperl_nonshr='-lperl_nonshr' ;; *) shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" case "$osvers" in 3*) shrpldflags="$shrpldflags -e _nostart" ;; *) shrpldflags="$shrpldflags -b noentry" ;; esac shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib" linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl" linklibperl_nonshr='-lperl_nonshr' ;; esac ;; hpux*) linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl" ;; os390*) shrpldflags='-W l,XPLINK,dll' linklibperl='libperl.x' DPERL_EXTERNAL_GLOB='' ;; esac case "$ldlibpthname" in '') ;; *) case "$osname" in os2) ldlibpth='' ;; *) eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\"" ;; esac # Strip off any trailing :'s ldlibpth=`echo $ldlibpth | sed 's/:*$//'` ;; esac case "$ldlibpth" in # Protect any spaces *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; esac case "$osname" in linux) # If there is a pre-existing $libperl from a previous # installation, Linux needs to use LD_PRELOAD to # override the LD_LIBRARY_PATH setting. See the # INSTALL file, under "Building a shared perl library". # If there is no pre-existing $libperl, we don't need # to do anything further. if test -f $archlib/CORE/$libperl; then rm -f preload cat <<'EOT' > preload #! /bin/sh lib=$1 shift test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" exec "$@" EOT chmod 755 preload ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" fi ;; os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" ;; esac ;; *) pldlflags='' static_ldflags='CCCDLFLAGS=' ;; esac : Prepare dependency lists for Makefile. dynamic_list=' ' dynamic_ext_re="lib/auto/re/re.$dlext" extra_dep='' for f in $dynamic_ext; do : the dependency named here will never exist base=`echo "$f" | sed 's/.*\///'` this_target="lib/auto/$f/$base.$dlext" dynamic_list="$dynamic_list $this_target" : Parallel makes reveal that we have some interdependencies case $f in Encode) extra_dep="$extra_dep $this_target: lib/auto/Cwd/Cwd.$dlext" ;; Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep $this_target: lib/auto/List/Util/Util.$dlext" ;; Unicode/Normalize) extra_dep="$extra_dep $this_target: uni.data" ;; Text/ParseWords) extra_dep="$extra_dep $this_target: lib/auto/Scalar/Util.$dlext" ;; SDBM_File) extra_dep="$extra_dep $this_target: lib/auto/Cwd/Cwd.$dlext" ;; esac done static_list=' ' for f in $static_ext; do base=`echo "$f" | sed 's/.*\///'` static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" : Parallel makes reveal that we have some interdependencies this_target="lib/auto/$f/$base\$(LIB_EXT)" case $f in Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep $this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;; Unicode/Normalize) extra_dep="$extra_dep $this_target: uni.data" ;; esac done nonxs_list=' ' for f in $nonxs_ext; do p=`echo "$f" | tr / -` for d in ext dist cpan; do if test -d $d/$p; then nonxs_list="$nonxs_list $d/$p/pm_to_blib" fi done done dtrace_h='' dtrace_o='' case "$usedtrace" in define|true) dtrace_h='perldtrace.h' $dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \ && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' ;; esac echo "Extracting $Makefile (with variable substitutions)" $spitshell >$Makefile <>$Makefile <>$Makefile <<'!NO!SUBS!' CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@` CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<` CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl CONFIGPOD = lib/Config.pod CONFIGH = config.h !NO!SUBS! ;; *) # if cross-compilation $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h # Files to be built with variable substitution before miniperl # is available. sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \ myconfig.SH writemain.SH pod/Makefile.SH shextract = Makefile cflags config.h makeaperl makedepend \ makedir myconfig writemain pod/Makefile # Files to be built with variable substitution after miniperl is # available. Dependencies handled manually below (for now). pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \ pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \ pod/pod2usage pod/podchecker pod/podselect addedbyconf = UU $(shextract) $(plextract) pstruct # Unicode data files generated by mktables unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \ lib/unicore/CombiningClass.pl lib/unicore/Name.pl \ lib/unicore/Heavy.pl lib/unicore/mktables.lst # Directories of Unicode data files generated by mktables unidatadirs = lib/unicore/To lib/unicore/lib h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h h5 = utf8.h warnings.h mydtrace.h op_reg_common.h h = $(h1) $(h2) $(h3) $(h4) $(h5) c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c c5 = $(madlysrc) $(mallocsrc) c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c perlmini.c obj0 = op$(OBJ_EXT) perl$(OBJ_EXT) obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) $(DTRACE_O) ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS) obj = $(ndt_obj) $(DTRACE_O) perltoc_pod_prereqs = extra.pods pod/perl5136delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs) Icwd = -Idist/Cwd -Idist/Cwd/lib lintflags = \ -b \ -n \ -p \ -Ncheck=%all \ -Nlevel=4 \ -errchk=parentheses \ -errhdr=%all \ -errfmt=src \ -errtags \ -erroff=E_ASSIGN_NARROW_CONV \ -erroff=E_BAD_PTR_CAST \ -erroff=E_BAD_PTR_CAST_ALIGN \ -erroff=E_BAD_PTR_INT_COMBINATION \ -erroff=E_BAD_SIGN_EXTEND \ -erroff=E_BLOCK_DECL_UNUSED \ -erroff=E_CASE_FALLTHRU \ -erroff=E_CONST_EXPR \ -erroff=E_CONSTANT_CONDITION \ -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \ -erroff=E_EQUALITY_NOT_ASSIGNMENT \ -erroff=E_EXPR_NULL_EFFECT \ -erroff=E_FALSE_LOGICAL_EXPR \ -erroff=E_INCL_NUSD \ -erroff=E_LOOP_EMPTY \ -erroff=E_MAIN_PARAM \ -erroff=E_POINTER_TO_OBJECT \ -erroff=E_PTRDIFF_OVERFLOW \ -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \ -erroff=E_STATIC_UNUSED \ -erroff=E_TRUE_LOGICAL_EXPR splintflags = \ -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \ -D__builtin_va_list=va_list \ -Dsigjmp_buf=jmp_buf \ -warnposix \ \ +boolint \ +charintliteral \ -fixedformalarray \ -mustfreefresh \ -nestedextern \ -predboolint \ -predboolothers \ -preproc \ -boolops \ -shadow \ -nullstate \ +longintegral \ +matchanyintegral \ -type \ \ +line-len 999 \ +weak splintfiles = $(c1) .c$(OBJ_EXT): $(CCCMD) $(PLDLFLAGS) $*.c .c.i: $(CCCMDSRC) -E $*.c > $*.i .c.s: $(CCCMDSRC) -S $*.c all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make @echo " "; @echo " Everything is up to date. Type '$(MAKE) test' to run test suite." .PHONY: all translators utilities # Both git_version.h and lib/Config_git.pl are built # by make_patchnum.pl. git_version.h: lib/Config_git.pl lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl $(MINIPERL) make_patchnum.pl # make sure that we recompile perl.c if the git version changes perl$(OBJ_EXT): git_version.h translators: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all utilities: $(MINIPERL_EXE) $(CONFIGPM) $(plextract) FORCE @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all # This is now done by installman only if you actually want the man pages. # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; # Phony target to force checking subdirectories. # Apparently some makes require an action for the FORCE target. .PHONY: FORCE FORCE: @sh -c true !NO!SUBS! for file in op perl; do if $issymlink $file.c; then $spitshell >>$Makefile <>$Makefile <>$Makefile <>$Makefile <<'!NO!SUBS!' globals$(OBJ_EXT): uudmap.h bitcount.h uudmap.h: bitcount.h bitcount.h: generate_uudmap$(HOST_EXE_EXT) $(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT) $(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs) miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h $(CCCMD) $(PLDLFLAGS) $*.c perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) sh writemain $(DYNALOADER) $(static_ext) > perlmain.c perlmain$(OBJ_EXT): perlmain.c $(CCCMD) $(PLDLFLAGS) $*.c # The file ext.libs is a list of libraries that must be linked in # for static extensions, e.g. -lm -lgdbm, etc. The individual # static extension Makefile's add to it. ext.libs: $(static_ext) -@test -f ext.libs || touch ext.libs !NO!SUBS! # How to build libperl. This is still rather convoluted. # Load up custom Makefile.SH fragment for shared loading and executables: case "$osname" in *) Makefile_s="$osname/Makefile.SHs" ;; esac case "$osname" in aix) $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT) MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT) $(LIBPERL_NONSHR): $(obj) $(RMS) $(LIBPERL_NONSHR) $(AR) rcu $(LIBPERL_NONSHR) $(obj) $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \ opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS) MINIPERLEXP = $(MINIPERL_NONSHR) LIBPERLEXPORT = perl.exp !NO!SUBS! ;; *) $spitshell >>$Makefile <<'!NO!SUBS!' MINIPERLEXP = $(MINIPERL_EXE) PERLEXPORT = perl.exp !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp !NO!SUBS! ;; os2) $spitshell >>$Makefile <<'!NO!SUBS!' MINIPERLEXP = miniperl perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def !NO!SUBS! ;; cygwin) $spitshell >>$Makefile <<'!NO!SUBS!' cygwin.c: cygwin/cygwin.c $(LNS) cygwin/cygwin.c LIBPERL_NONSHR = libperl$(LIB_EXT) $(LIBPERL_NONSHR): $(obj) $(RMS) $(LIBPERL_NONSHR) $(AR) rcu $(LIBPERL_NONSHR) $(obj) !NO!SUBS! ;; esac if test -s $Makefile_s ; then . $Makefile_s $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' $(DTRACE_H): perldtrace.d $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H) mydtrace.h: $(DTRACE_H) !NO!SUBS! ;; esac case "$dtrace_o" in ?*) $spitshell >>$Makefile <<'!NO!SUBS!' $(DTRACE_O): perldtrace.d $(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj) !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT) !NO!SUBS! case "$useshrplib" in true) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f $@ $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs) !NO!SUBS! case "$osname" in aix) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f libperl$(OBJ_EXT) mv $@ libperl$(OBJ_EXT) $(AR) qv $(LIBPERL) libperl$(OBJ_EXT) !NO!SUBS! ;; esac ;; *) $spitshell >>$Makefile <<'!NO!SUBS!' rm -f $(LIBPERL) $(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER) @$(ranlib) $(LIBPERL) !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' # How to build executables. # The $& notation tells Sequent machines that it can do a parallel make, # and is harmless otherwise. # The miniperl -w -MExporter line is a basic cheap test to catch errors # before make goes on to run preplibrary and then MakeMaker on extensions. # This is very handy because later errors are often caused by miniperl # build problems but that's not obvious to the novice. # The Module used here must not depend on Config or any extensions. !NO!SUBS! case "${osname}${osvers}" in aix*|beos*) $spitshell >>$Makefile <<'!NO!SUBS!' $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) \ $(mini_obj) \ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs) $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; next4*) $spitshell >>$Makefile <<'!NO!SUBS!' $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) perlmini$(OBJ_EXT) opmini$(OBJ_EXT) $(CC) -o $(MINIPERL_EXE) $(mini_obj) \ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs) $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; darwin*) case "$osvers" in [1-6].*) ;; *) case "$ldflags" in *"-flat_namespace"*) ;; *) # to allow opmini.o to override stuff in libperl.dylib $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) -@rm -f miniperl.xok $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \ $(mini_obj) \ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs) $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; *) $spitshell >>$Makefile <<'!NO!SUBS!' $(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) -@rm -f miniperl.xok $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \ $(mini_obj) \ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs) $(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' $(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) -@rm -f miniperl.xok $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) # Purify/Quantify Perls. pure$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) purecov$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) # Valgrind perl (currently Linux only) perl.valgrind.config: config.sh @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." @$(MAKE) perl.config.dashg @echo "Checking usemymalloc='n' in config.sh..." @grep "^usemymalloc=" config.sh @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 @echo "And of course you have to have valgrind..." $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1 # Third Degree Perl (Tru64 only) perl.config.dashg: @echo "Checking optimize='-g' in config.sh..." @grep "^optimize=" config.sh @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1 perl.third.config: config.sh @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." @$(MAKE) perl.config.dashg @echo "Checking usemymalloc='n' in config.sh..." @grep "^usemymalloc=" config.sh @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 perl.third: /usr/bin/atom perl.third.config perl atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl @echo "Now you may run perl.third and then study perl.3log." # Pixie Perls (Tru64 and IRIX only) perl.pixie.config: config.sh @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..." @$(MAKE) perl.config.dashg perl.pixie.atom: /usr/bin/atom perl atom -tool pixie -L. -all -toolargs="-quiet" perl perl.pixie.irix: perl pixie perl perl.pixie: /usr/bin/pixie perl.pixie.config perl if test -x /usr/bin/atom; then \ $(MAKE) perl.pixie.atom; \ else \ $(MAKE) perl.pixie.irix; \ fi @echo "Now you may run perl.pixie and then run pixie." # Gprof Perl perl.config.dashpg: @echo "Checking optimize='-pg' in config.sh..." @grep "^optimize=" config.sh @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1 perl.gprof.config: config.sh @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..." @$(MAKE) perl.config.dashpg perl.gprof: /usr/bin/gprof perl.gprof.config @-rm -f perl $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl @echo "Now you may run perl.gprof and then run gprof perl.gprof." # Gcov Perl perl.config.gcov: @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..." @echo "Checking gccversion in config.sh..." @grep "^gccversion=" config.sh @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..." @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..." @grep "^ccflags=" config.sh @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1 perl.gcov: perl.config.gcov @-rm -f perl $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl @echo "Now you may run perl.gcov and then run gcov some.c." # Microperl. This is just a convenience thing if one happens to # build also the full Perl and therefore the real big Makefile: # usually one should manually explicitly issue the below command. .PHONY: microperl microperl: $(MAKE) -f Makefile.micro !NO!SUBS! fi # Some environment have no system(), which mkpport uses. # Let's try running the commands with shell. case "${osname}" in catamount) $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' .PHONY: makeppport makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext) $(MINIPERL) $(Icwd) mkppport !NO!SUBS! ;; esac $spitshell >>$Makefile <<'!NO!SUBS!' .PHONY: preplibrary preplibrary: $(MINIPERL_EXE) $(CONFIGPM) lib/re.pm $(PREPLIBRARY_LIBPERL) $(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD) $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl $(MINIPERL) configpm lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM) $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm lib/re.pm: ext/re/re.pm @-rm -f $@ cp ext/re/re.pm lib/re.pm $(plextract): $(MINIPERL_EXE) $(CONFIGPM) x2p/s2p $(dynamic_ext) @-rm -f $@ $(MINIPERL) $@.PL x2p/s2p: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) x2p/s2p.PL cd x2p; $(LDLIBPTH) $(MAKE) s2p unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext) $(MINIPERL) $(Icwd) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p # Commented out so always runs, mktables looks at far more files than we # can in this makefile to decide if needs to run or not # touch uni.data # $(PERL_EXE) and ext because buildtoc uses Text::Wrap uses re # But also this ensures that all extensions are built before we try to scan # them, which picks up Devel::PPPort's documentation. pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc $(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q pod/perlapi.pod: pod/perlintern.pod pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc $(MINIPERL) autodoc.pl pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q pod/perl5136delta.pod: pod/perldelta.pod $(LNS) perldelta.pod pod/perl5136delta.pod extra.pods: $(MINIPERL_EXE) -@test ! -f extra.pods || rm -f `cat extra.pods` -@rm -f extra.pods -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \ nx=`echo $$x | sed -e "s/README\.//"`; \ $(LNS) ../$$x "pod/perl"$$nx".pod" ; \ echo "pod/perl"$$nx".pod" >> extra.pods ; \ done extras.make: $(PERL_EXE) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` extras.test: $(PERL_EXE) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` extras.install: $(PERL_EXE) -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` .PHONY: install install-strip install-all install-verbose install-silent \ no-install install.perl install.man install.html install-strip: $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" install install-all: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" install-verbose: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" install-silent: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" no-install: $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" # Set this to an empty string to avoid an attempt of rebuild before install INSTALL_DEPENDENCE = all install.perl: $(INSTALL_DEPENDENCE) installperl $(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) -@test ! -s extras.lst || $(MAKE) extras.install install.man: all installman $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS) # XXX Experimental. Hardwired values, but useful for testing. # Eventually Configure could ask for some of these values. install.html: all installhtml -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. $(RUN_PERL) installhtml \ --podroot=. --podpath=. --recurse \ --htmldir=$(privlib)/html \ --htmlroot=$(privlib)/html \ --splithead=pod/perlipc \ --splititem=pod/perlfunc \ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \ --verbose # I now supply perly.c with the kits, so the following section is # used only if you force bison to run by saying # make regen_perly # You normally shouldn't remake perly.[ch]. .PHONY: regen_perly run_byacc: @echo "run_byacc is obsolete; try 'make regen_perly' instead" # this outputs perly.h, perly.act and perly.tab regen_perly: perl regen_perly.pl # We don't want to regenerate perly.c and perly.h, but they might # appear out-of-date after a patch is applied or a new distribution is # made. perly.c: perly.y -@sh -c true perly.h: perly.y -@sh -c true # No compat3.sym here since and including the 5.004_50. # No interp.sym since 5.005_03. SYM = global.sym globvar.sym perlio.sym pp.sym SYMH = perlvars.h intrpvar.h CHMOD_W = chmod +w # The following files are generated automatically # embed.pl: proto.h embed.h embedvar.h global.sym # perlapi.h perlapi.c # [* embed.pl needs pp.sym generated by opcode.pl! *] # keywords.pl: keywords.h # opcode.pl: opcode.h opnames.h pp_proto.h pp.sym # regcomp.pl: regnodes.h # warnings.pl: warnings.h lib/warnings.pm # The correct versions should be already supplied with the perl kit, # in case you don't have perl available. # To force them to be regenerated, run # perl regen.pl # with your existing copy of perl # (make regen_headers is kept for backwards compatibility) AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ embed.h embedvar.h global.sym \ perlapi.h perlapi.c regnodes.h \ warnings.h lib/warnings.pm .PHONY: regen_headers regen_all regen: FORCE -perl regen.pl regen_headers: FORCE -perl regen.pl -v regen_meta: META.yml META.yml: FORCE PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta regen_all: regen regen_meta .PHONY: manisort manicheck manisort: FORCE @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \ perl Porting/manisort -q -o MANIFEST; sh -c true) manicheck: FORCE perl Porting/manicheck # Extensions: # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will # automatically get built. There should ordinarily be no need to change # any of this part of makefile. # # The dummy dependency is a place holder in case $(dynamic_ext) or # $(static_ext) is empty. # # DynaLoader may be needed for extensions that use Makefile.PL. $(DYNALOADER): $(MINIPERL_EXE) preplibrary FORCE $(nonxs_ext) $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) d_dummy $(dynamic_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT) $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic s_dummy $(static_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS) n_dummy $(nonxs_ext): $(MINIPERL_EXE) preplibrary FORCE $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) !NO!SUBS! $spitshell >>$Makefile <>$Makefile <<'!NO!SUBS!' .PHONY: printconfig printconfig: @eval `$(RUN_PERL) -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR) .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \ realclean _realcleaner clobber _clobber \ distclean veryclean _verycleaner clean: _tidy _mopup realclean: _realcleaner _mopup @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh" _clobber: -@rm -f Cross/run-* Cross/to-* Cross/from-* rm -f t/test_state rm -f config.sh cppstdin Policy.sh extras.lst clobber: _realcleaner _mopup _clobber distclean: clobber # Like distclean but also removes emacs backups and *.orig. veryclean: _verycleaner _mopup _clobber -@rm -f Obsolete Wanted # Do not 'make _mopup' directly. _mopup: rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT) bitcount.h -rmdir .depending -@test -f extra.pods && rm -f `cat extra.pods` -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o -rm -f perl.export perl.dll perl.libexp perl.map perl.def -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old -rm -f config.arch config.over $(DTRACE_H) runtests # Do not 'make _tidy' directly. _tidy: -cd pod; $(LDLIBPTH) $(MAKE) clean -cd utils; $(LDLIBPTH) $(MAKE) clean -cd x2p; $(LDLIBPTH) $(MAKE) clean -rm -f lib/Config_git.pl git_version.h -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \ done _cleaner1: -cd os2; rm -f Makefile -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN) -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN) -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN) -@if test -f $(MINIPERL_EXE) ; then \ for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \ $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \ done ; \ else \ sh $(CLEAN).sh ; \ fi rm -f realclean.sh veryclean.sh -for file in `find cpan dist ext -name ppport.h` ; do rm -f $$file; done # Dear POSIX, thanks for making the default to xargs to be # run once if nothhing is passed in. It is such a great help. # Some systems do not support "?", so keep these files separate. _cleaner2: -rm -f core.*perl.*.? t/core.perl.*.? .?*.c rm -f core *perl.core t/core t/*perl.core core.* t/core.* rm -f t/misctmp* t/forktmp* t/tmp* t/c t/$(PERL_EXE) t/rantests rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) rm -rf $(addedbyconf) rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old rm -f $(private) rm -rf $(unidatafiles) $(unidatadirs) rm -rf lib/auto rm -f lib/.exists lib/*/.exists lib/*/*/.exists rm -f h2ph.man pstruct rm -rf .config rm -f preload lib/re.pm rm -rf lib/Encode lib/Compress lib/Hash lib/re rm -rf lib/TAP lib/Module/Pluggable lib/App rm -rf lib/mro rm -rf lib/IO/Compress lib/IO/Uncompress rm -f lib/ExtUtils/ParseXS/t/XSTest.c rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) rm -fr lib/B rm -fr lib/CPAN lib/CPANPLUS rm -fr lib/ExtUtils/CBuilder -rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror -rmdir ext/B/lib -rmdir lib/Archive/Tar lib/Archive lib/Attribute -rmdir lib/CGI -rmdir lib/Data lib/Devel lib/Digest -rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker -rmdir lib/File/Spec lib/Filter/Util lib/Filter -rmdir lib/I18N/LangTags lib/IO/Socket lib/IO lib/IPC -rmdir lib/List/Util lib/List -rmdir lib/Locale/Maketext lib/Locale -rmdir lib/Log/Message lib/Log -rmdir lib/Math/Big* lib/Math -rmdir lib/Memoize lib/MIME -rmdir lib/Module/Build/Platform lib/Module/Build lib/Module/Load lib/Module -rmdir lib/Net/FTP lib/Object -rmdir lib/Parse/CPAN lib/Parse -rmdir lib/PerlIO/via lib/PerlIO -rmdir lib/Package lib/Params -rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text -rmdir lib/Sys lib/Scalar/Util lib/Scalar -rmdir lib/Term/UI lib/Thread -rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test -rmdir lib/Unicode/Collate -rmdir lib/XS/APItest lib/XS -rmdir lib/inc/latest lib/inc -rmdir lib/autodie/exception lib/autodie lib/encoding lib/threads -rm -f lib/ExtUtils/CBuilder/t/libcompilet.dll.a -rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a _realcleaner: @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean @$(LDLIBPTH) $(MAKE) _cleaner2 _verycleaner: @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean @$(LDLIBPTH) $(MAKE) _cleaner2 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig .PHONY: lint lint: $(c) rm -f *.ln lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) .PHONY: splint splint: $(c) splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles) # Need to unset during recursion to go out of loop. # The README below ensures that the dependency list is never empty and # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding. MAKEDEPEND = Makefile makedepend $(FIRSTMAKEFILE): README $(MAKEDEPEND) $(MAKE) depend MAKEDEPEND= config.h: config_h.SH config.sh $(SHELL) config_h.SH # When done, touch perlmain.c so that it doesn't get remade each time. .PHONY: depend depend: makedepend sh ./makedepend MAKE=$(MAKE) - test -s perlmain.c && touch perlmain.c cd x2p; $(MAKE) depend # Cannot postpone this until $firstmakefile is ready ;-) makedepend: makedepend.SH config.sh sh ./makedepend.SH runtests: runtests.SH config.sh sh ./runtests.SH .PHONY: test check test_prep test_prep_nodll test_prep_pre \ test_prep_reonly test_tty test-tty test_notty test-notty \ utest ucheck test.utf8 check.utf8 test.torture torturetest \ test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ test.third check.third utest.third ucheck.third test_notty.third \ test.deparse test_notty.deparse test_harness test_harness_notty \ minitest coretest test.taintwarn test-reonly _test _test: echo >&2 The _test target is deprecated. Please upgrade your smoker PERL=./perl $(RUN_TESTS) choose # Cannot delegate rebuilding of t/perl to make # to allow interlaced test and minitest # Architecture-neutral stuff: test_prep_pre: preplibrary utilities $(nonxs_ext) test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) $(dynamic_ext) $(TEST_PERL_DLL) runtests cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE)) test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL) $(MINIPERL) make_ext.pl $(dynamic_ext_re) MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE)) test check: test_prep $(RUN_TESTS) choose test_tty: test_prep $(RUN_TESTS) tty test_notty: test_prep $(RUN_TESTS) no-tty utest ucheck test.utf8 check.utf8: test_prep TEST_ARGS=-utf8 $(RUN_TESTS) choose coretest: test_prep TEST_ARGS=-core $(RUN_TESTS) choose test-prep: test_prep test-tty: test_tty test-notty: test_notty # Torture testing test.torture torturetest: test_prep TEST_ARGS=-torture $(RUN_TESTS) choose # Targets for UTF16 testing: minitest.utf16: minitest.prep - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \ && $(RUN_PERL) TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t .clist hlist: $(h) echo $(h) | tr ' ' $(TRNL) >.hlist shlist: $(sh) echo $(sh) | tr ' ' $(TRNL) >.shlist pllist: $(pl) echo $(pl) | tr ' ' $(TRNL) >.pllist Makefile: Makefile.SH ./config.sh $(SHELL) Makefile.SH .PHONY: distcheck distcheck: FORCE perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' .PHONY: elc elc: emacs/cperl-mode.elc emacs/cperl-mode.elc: emacs/cperl-mode.el -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el .PHONY: etags ctags tags etags: TAGS TAGS: emacs/cperl-mode.elc sh emacs/ptags # Let's hope make will not go into an infinite loop on case-unsensitive systems # This may also fail if . is in the head of the path, since perl will # require -Ilib tags: TAGS perl emacs/e2ctags.pl TAGS > tags ctags: ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE # If this runs make out of memory, delete /usr/include lines. !NO!SUBS! $eunicefix Makefile case `pwd` in *SH) $rm -f ../Makefile $ln Makefile ../Makefile ;; esac $rm -f $firstmakefile # Now do any special processing required before building. case "$ebcdic" in define) xxx='' echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 case "$osname" in os390|posix-bc) if cd x2p then rm -f y.tab.c y.tab.h case "$osname" in posix-bc) # we are using two different yaccs in BS2000 Posix! byacc a2p.y >/dev/null 2>&1 ;; *) # e.g. os390 yacc a2p.y >/dev/null 2>&1 ;; esac if cmp -s y.tab.c a2p.c then rm -f y.tab.c else echo "a2p.y -> a2p.c" >&2 mv -f y.tab.c a2p.c chmod u+w a2p.c sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ -e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \ -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c xxx="$xxx a2p.c" fi # In case somebody yacc -d:ed the a2p.y. if test -f y.tab.h then if cmp -s y.tab.h a2p.h then rm -f y.tab.h else echo "a2p.h -> a2p.h" >&2 mv -f y.tab.h a2p.h xxx="$xxx a2p.h" fi fi cd .. fi ;; vmesa) # Do nothing in VM/ESA. ;; *) echo "'$osname' is an EBCDIC system I don't know that well." >&4 ;; esac case "$xxx" in '') echo "No parser files were regenerated. That's okay." >&2 ;; esac ;; esac # ex: set ts=8 sts=4 sw=4 noet: