case $CONFIG in '') if test -f config.sh; then TOP=.; elif test -f ../config.sh; then TOP=..; elif test -f ../../config.sh; then TOP=../..; elif test -f ../../../config.sh; then TOP=../../..; elif test -f ../../../../config.sh; then TOP=../../../..; else echo "Can't find config.sh."; exit 1 fi . $TOP/config.sh ;; esac : This forces SH files to create target in same directory as SH file. : This is so that make depend always knows where to find SH derivatives. case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac case "$d_dosuid" in *define*) suidperl='suidperl' ;; *) suidperl='';; esac case "$useshrplib" in true) pldlflags="$cccdlflags" # NeXT-4 specific stuff. Can't we do this in the hint file? case "${osname}${osvers}" in next4*) ld='libtool -dynamic -undefined warning -framework System \ -compatibility_version 1 -current_version $(PATCHLEVEL) \ -prebind -seg1addr 0x27000000 -install_name $(SHRPDIR)/$@' ;; esac ;; *) pldlflags='' ;; esac : Prepare dependency lists for Makefile. dynamic_list=' ' for f in $dynamic_ext; do : the dependency named here will never exist base=`echo "$f" | sed 's/.*\///'` dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext" done static_list=' ' for f in $static_ext; do base=`echo "$f" | sed 's/.*\///'` static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)" done echo "Extracting Makefile (with variable substitutions)" $spitshell >Makefile <>Makefile <<'!NO!SUBS!' CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@` private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm # Files to be built with variable substitution before miniperl # is available. sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \ makedir.SH perl_exp.SH writemain.SH shextract = Makefile cflags config.h makeaperl makedepend \ makedir perl.exp writemain # Files to be built with variable substitution after miniperl is # available. Dependencies handled manually below (for now). pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text addedbyconf = UU $(shextract) $(plextract) pstruct h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h h = $(h1) $(h2) $(h3) $(h4) c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT) obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) # Once perl has been Configure'd and built ok you build different # perl variants (Debugging, Embedded, Multiplicity etc) by saying: # make clean; make LIBPERL=libperl.a # where is some combination of 'd' and(or) 'e' or 'm'. # See cflags to understand how this works. # # This mechanism is getting clunky and might not even work any more. # EMBEDDING is on by default, and MULTIPLICITY doesn't work. # lintflags = -hbvxac .c$(OBJ_EXT): $(CCCMD) $(PLDLFLAGS) $*.c all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext) @echo " "; echo " Everything is up to date." translators: miniperl lib/Config.pm FORCE @echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all utilities: miniperl lib/Config.pm FORCE @echo " "; echo " Making utilities"; cd utils; $(MAKE) all # This is now done by installman only if you actually want the man pages. # @echo " "; echo " Making docs"; cd pod; $(MAKE) all; # Phony target to force checking subdirectories. # Apparently some makes require an action for the FORCE target. FORCE: @sh -c true # The $& notation tells Sequent machines that it can do a parallel make, # and is harmless otherwise. # The miniperl -w -MExporter line is a basic cheap test to catch errors # before make goes on to run preplibrary and then MakeMaker on extensions. # This is very handy because later errors are often caused by miniperl # build problems but that's not obvious to the novice. # The Module used here must not depend on Config or any extensions. miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LIBPERL) $(libs) @./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest miniperlmain$(OBJ_EXT): miniperlmain.c $(CCCMD) $(PLDLFLAGS) $*.c perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) sh writemain $(DYNALOADER) $(static_ext) > tmp sh mv-if-diff tmp perlmain.c perlmain$(OBJ_EXT): perlmain.c $(CCCMD) $(PLDLFLAGS) $*.c # The file ext.libs is a list of libraries that must be linked in # for static extensions, e.g. -lm -lgdbm, etc. The individual # static extension Makefile's add to it. ext.libs: $(static_ext) -@test -f ext.libs || touch ext.libs perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LIBPERL) `cat ext.libs` $(libs) !NO!SUBS! # How to build libperl. This is still rather convoluted. # Load up custom Makefile.SH fragments? if test -r $osname/Makefile.SHs ; then . $osname/Makefile.SHs $spitshell >>Makefile <>Makefile <<'!NO!SUBS!' $(LIBPERL): $& perl$(OBJ_EXT) $(obj) !NO!SUBS! case "$useshrplib" in true) $spitshell >>Makefile <<'!NO!SUBS!' $(LD) $(LDDLFLAGS) -o $@ perl$(OBJ_EXT) $(obj) !NO!SUBS! ;; *) $spitshell >>Makefile <<'!NO!SUBS!' rm -f $(LIBPERL) $(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj) @$(ranlib) $(LIBPERL) !NO!SUBS! ;; esac fi $spitshell >>Makefile <<'!NO!SUBS!' # This version, if specified in Configure, does ONLY those scripts which need # set-id emulation. Suidperl must be setuid root. It contains the "taint" # checks as well as the special code to validate that the script in question # has been invoked correctly. suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) `cat ext.libs` $(libs) sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h) $(RMS) sperl.c $(LNS) perl.c sperl.c $(CCCMD) -DIAMSUID sperl.c $(RMS) sperl.c # We have to call our ./makedir because Ultrix 4.3 make can't handle the line # test -d lib/auto || mkdir lib/auto # preplibrary: miniperl lib/Config.pm $(plextract) @sh ./makedir lib/auto @echo " AutoSplitting perl library" @./miniperl -Ilib -e 'use AutoSplit; \ autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm # Take care to avoid modifying lib/Config.pm without reason lib/Config.pm: config.sh miniperl configpm ./miniperl configpm tmp sh mv-if-diff tmp lib/Config.pm lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm ./miniperl minimod.pl > tmp && mv tmp $@ $(plextract): miniperl lib/Config.pm ./miniperl -Ilib $@.PL install: all install.perl install.man install.perl: all installperl ./perl installperl install.man: all installman ./perl installman # Not implemented yet. #install.html: all installhtml # ./perl installhtml # I now supply perly.c with the kits, so the following section is # used only if you force byacc to run by saying # make run_byacc # Since we patch up the byacc output, the perly.fixer script needs # to run with precisely the same version of byacc as I use. You # normally shouldn't remake perly.[ch]. run_byacc: FORCE @ echo 'Expect' 130 shift/reduce and 1 reduce/reduce conflict $(BYACC) -d perly.y sh $(shellflags) ./perly.fixer y.tab.c perly.c sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' perly.c >perly.tmp && mv perly.tmp perly.c mv y.tab.h perly.h echo 'extern YYSTYPE yylval;' >>perly.h - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms # We don't want to regenerate perly.c and perly.h, but they might # appear out-of-date after a patch is applied or a new distribution is # made. perly.c: perly.y -@sh -c true perly.h: perly.y -@sh -c true # The following three header files are generated automatically # keywords.h: keywords.pl # opcode.h: opcode.pl # embed.h: embed.pl global.sym interp.sym # The correct versions should be already supplied with the perl kit, # in case you don't have perl available. # To force them to run, type # make regen_headers regen_headers: FORCE perl keywords.pl perl opcode.pl perl embed.pl # Extensions: # Names added to $(dynamic_ext) or $(static_ext) will automatically # get built. There should ordinarily be no need to change any of # this part of makefile. # # The dummy dependency is a place holder in case $(dynamic_ext) or # $(static_ext) is empty. # # DynaLoader may be needed for extensions that use Makefile.PL. $(DYNALOADER): miniperl preplibrary FORCE @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL) d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE @sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL) s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE @sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL) clean: rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c rm -f perl.exp ext.libs -rm -f perl.export perl.dll perl.libexp perl.map perl.def -cd pod; $(MAKE) clean -cd utils; $(MAKE) clean -cd x2p; $(MAKE) clean -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \ sh ext/util/make_ext clean $$x ; \ done rm -f perl suidperl miniperl $(LIBPERL) realclean: clean -cd os2; rm -f Makefile -cd pod; $(MAKE) realclean -cd utils; $(MAKE) realclean -cd x2p; $(MAKE) realclean -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \ sh ext/util/make_ext realclean $$x ; \ done rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl rm -rf $(addedbyconf) rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old rm -f $(private) rm -rf lib/auto rm -f lib/.exists rm -f h2ph.man pstruct rm -rf .config @echo "Note that make realclean does not delete config.sh" clobber: realclean rm -f config.sh cppstdin distclean: clobber # The following lint has practically everything turned on. Unfortunately, # you have to wade through a lot of mumbo jumbo that can't be suppressed. # If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message # for that spot. lint: perly.c $(c) lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz # Need to unset during recursion to go out of loop MAKEDEPEND = makedepend $(FIRSTMAKEFILE): Makefile $(MAKEDEPEND) $(MAKE) depend MAKEDEPEND= config.h: config.sh $(SHELL) config_h.SH perl.exp: perl_exp.SH config.sh $(SHELL) perl_exp.SH # When done, touch perlmain.c so that it doesn't get remade each time. depend: makedepend sh ./makedepend - test -s perlmain.c && touch perlmain.c cd x2p; $(MAKE) depend # Cannot postpone this until $firstmakefile is ready ;-) makedepend: makedepend.SH config.sh sh ./makedepend.SH check test: miniperl perl preplibrary $(dynamic_ext) - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT)) && ./perl TEST .clist hlist: $(h) echo $(h) | tr ' ' '\012' >.hlist shlist: $(sh) echo $(sh) | tr ' ' '\012' >.shlist pllist: $(pl) echo $(pl) | tr ' ' '\012' >.pllist Makefile: Makefile.SH ./config.sh $(SHELL) Makefile.SH distcheck : FORCE perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()' manifest : perl '-MExtUtils::Manifest=&mkmanifest' -e 'mkmanifest()' # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE # If this runs make out of memory, delete /usr/include lines. !NO!SUBS! $eunicefix Makefile case `pwd` in *SH) $rm -f ../Makefile $ln Makefile ../Makefile ;; esac $rm -f $firstmakefile