#!/usr/bin/perl -w use strict; use Getopt::Long qw(:config bundling no_auto_abbrev); use Pod::Usage; use Config; use File::Temp qw(tempdir); use File::Spec; my @targets = qw(none config.sh config.h miniperl lib/Config.pm Fcntl perl test_prep); my %options = ( 'expect-pass' => 1, clean => 1, # mostly for debugging this ); # We accept #!./miniperl and #!./perl # We don't accept #!miniperl and #!perl as their intent is ambiguous my $run_with_our_perl = qr{\A#!(\./(?:mini)?perl)\b}; my $linux64 = `uname -sm` eq "Linux x86_64\n" ? '64' : ''; my @paths; if ($^O eq 'linux') { # This is the search logic for a multi-arch library layout # added to linux.sh in commits 40f026236b9959b7 and dcffd848632af2c7. my $gcc = -x '/usr/bin/gcc' ? '/usr/bin/gcc' : 'gcc'; foreach (`$gcc -print-search-dirs`) { next unless /^libraries: =(.*)/; foreach (split ':', $1) { next if m/gcc/; next unless -d $_; s!/$!!; push @paths, $_; } } push @paths, map {$_ . $linux64} qw(/usr/local/lib /lib /usr/lib) if $linux64; } my %defines = ( usedevel => '', optimize => '-g', ld => 'cc', (@paths ? (libpth => \@paths) : ()), ); # Needed for the 'ignore_versioned_solibs' emulation below. push @paths, qw(/usr/local/lib /lib /usr/lib) unless $linux64; unless(GetOptions(\%options, 'target=s', 'make=s', 'jobs|j=i', 'crash', 'expect-pass=i', 'expect-fail' => sub { $options{'expect-pass'} = 0; }, 'clean!', 'one-liner|e=s@', 'c', 'l', 'w', 'match=s', 'no-match=s' => sub { $options{match} = $_[1]; $options{'expect-pass'} = 0; }, 'force-manifest', 'force-regen', 'setpgrp!', 'timeout=i', 'test-build', 'validate', 'all-fixups', 'early-fixup=s@', 'late-fixup=s@', 'valgrind', 'check-args', 'check-shebang!', 'usage|help|?', 'gold=s', 'module=s', 'with-module=s', 'cpan-config-dir=s', 'test-module=s', 'no-module-tests', 'A=s@', 'D=s@' => sub { my (undef, $val) = @_; if ($val =~ /\A([^=]+)=(.*)/s) { $defines{$1} = length $2 ? $2 : "\0"; } else { $defines{$val} = ''; } }, 'U=s@' => sub { $defines{$_[1]} = undef; }, )) { pod2usage(exitval => 255, verbose => 1); } my ($target, $match) = @options{qw(target match)}; @ARGV = ('sh', '-c', 'cd t && ./perl TEST base/*.t') if $options{validate} && !@ARGV; pod2usage(exitval => 0, verbose => 2) if $options{usage}; # This needs to be done before the next arguments check, as it's populating # @ARGV if (defined $target && $target =~ /\.t\z/) { # t/TEST don't have a reliable way to run the test script under valgrind # The $ENV{VALGRIND} code was only added after v5.8.0, and is more # geared to logging than to exiting on failure if errors are found. # I guess one could fudge things by replacing the symlink t/perl with a # wrapper script which invokes valgrind, but leave doing that until # someone needs it. (If that's you, then patches welcome.) foreach (qw(valgrind match validate test-build one-liner)) { die_255("$0: Test-case targets can't be run with --$_") if $options{$_}; } die_255("$0: Test-case targets can't be combined with an explicit test") if @ARGV; # Needing this unless is a smell suggesting that this implementation of # test-case targets is not really in the right place. unless ($options{'check-args'}) { # The top level sanity tests refuse to start or end a test run at a # revision which skips, hence this test ensures reasonable sanity at # automatically picking a suitable start point for both normal operation # and --expect-fail skip("Test case $target is not a readable file") unless -f $target && -r _; } # t/TEST runs from and takes pathnames relative to t/, so need to strip # out a leading t, or add ../ otherwise unless ($target =~ s!\At/!!) { $target = "../$target"; } @ARGV = ('sh', '-c', "cd t && ./perl TEST " . quotemeta $target); $target = 'test_prep'; } pod2usage(exitval => 255, verbose => 1) unless @ARGV || $match || $options{'test-build'} || defined $options{'one-liner'} || defined $options{module} || defined $options{'test-module'}; pod2usage(exitval => 255, verbose => 1) if !$options{'one-liner'} && ($options{l} || $options{w}); if ($options{'no-module-tests'} && $options{module}) { print STDERR "--module and --no-module-tests are exclusive.\n\n"; pod2usage(exitval => 255, verbose => 1) } if ($options{'no-module-tests'} && $options{'test-module'}) { print STDERR "--test-module and --no-module-tests are exclusive.\n\n"; pod2usage(exitval => 255, verbose => 1) } if ($options{module} && $options{'test-module'}) { print STDERR "--module and --test-module are exclusive.\n\n"; pod2usage(exitval => 255, verbose => 1) } check_shebang($ARGV[0]) if $options{'check-shebang'} && @ARGV && !$options{match}; exit 0 if $options{'check-args'}; =head1 NAME bisect.pl - use git bisect to pinpoint changes =head1 SYNOPSIS # When did this become an error? .../Porting/bisect.pl -e 'my $a := 2;' # When did this stop being an error? .../Porting/bisect.pl --expect-fail -e '1 // 2' # When did this test start failing? .../Porting/bisect.pl --target t/op/sort.t # When were all lines matching this pattern removed from all files? .../Porting/bisect.pl --match '\b(?:PL_)hash_seed_set\b' # When was some line matching this pattern added to some file? .../Porting/bisect.pl --expect-fail --match '\buseithreads\b' # When did this test program stop exiting 0? .../Porting/bisect.pl -- ./perl -Ilib ../test_prog.pl # When did this test program start crashing (any signal or coredump)? .../Porting/bisect.pl --crash -- ./perl -Ilib ../test_prog.pl # When did this first become valid syntax? .../Porting/bisect.pl --target=miniperl --end=v5.10.0 \ --expect-fail -e 'my $a := 2;' # What was the last revision to build with these options? .../Porting/bisect.pl --test-build -Dd_dosuid # When did this test program start generating errors from valgrind? .../Porting/bisect.pl --valgrind ../test_prog.pl # When did these cpan modules start failing to compile/pass tests? .../Porting/bisect.pl --module=autobox,Moose # When did this code stop working in blead with these modules? .../Porting/bisect.pl --with-module=Moose,Moo -e 'use Moose; 1;' # Like the above 2 but with custom CPAN::MyConfig .../Porting/bisect.pl --module=Moo --cpan-config-dir=/home/blah/custom/ =head1 DESCRIPTION Together F and F attempt to automate the use of C as much as possible. With one command (and no other files) it's easy to find out =over 4 =item * Which commit caused this example code to break? =item * Which commit caused this example code to start working? =item * Which commit added the first file to match this regex? =item * Which commit removed the last file to match this regex? =back usually without needing to know which versions of perl to use as start and end revisions. By default F will process all options, then use the rest of the command line as arguments to list C to run a test case. By default, the test case should pass (exit with 0) on earlier perls, and fail (exit non-zero) on I. F will use F to find the earliest stable perl version on which the test case passes, check that it fails on blead, and then use F with C to find the commit which caused the failure. Many of perl's own test scripts exit 0 even if their TAP reports test failures, and some need particular setup (such as running from the right directory, or adding C<-T> to the command line). Hence if you want to bisect a test script, you can specify it with the I<--target> option, and it will be invoked using F which performs all the setup, and exits non-zero if the TAP reports failures. This works for any file ending C<.t>, so you can use it with a file outside of the working checkout, for example to test a particular version of a test script, as a path inside the repository will (of course) be testing the version of the script checked out for the current revision, which may be too early to have the test you are interested in. Because the test case is the complete argument to C, it is easy to run something other than the F built, if necessary. If you need to run the perl built, you'll probably need to invoke it as C<./perl -Ilib ...>. As a special case, if the first argument of the test case is a readable file (whether executable or not), matching C then it will have C<./perl> <-Ilib> (or C<./miniperl>) prepended to it. You need a clean checkout to run a bisect. You can use the checkout containing F if you wish - in this case F will copy F to a temporary file generated by C. If doing this, beware that when the bisect ends (or you abort it) then your checkout is no longer at C, so you will need to C before restarting, to get the current version of F again. It's often easier either to copy F and F to another directory (I F<~/bin>, if you have one), or to create a second git repository for running bisect. To create a second local repository, if your working checkout is called F, a simple solution is to make a local clone, and run from that. I: cd .. git clone perl perl2 cd perl2 ../perl/Porting/bisect.pl ... By default, F will automatically disable the build of L for commits earlier than ccb44e3bf3be2c30, as it's not practical to patch DB_File 1.70 and earlier to build with current Berkeley DB headers. (ccb44e3bf3be2c30 was in September 1999, between 5.005_62 and 5.005_63.) If your F is old enough you can override this with C<-Unoextensions>. =head1 OPTIONS =over 4 =item * --start I Earliest revision to test, as a I (a tag, commit or anything else C understands as a revision). If not specified, F will search stable .0 perl releases until it finds one where the test case passes. The default is to search from 5.002 to the most recent tagged stable release (v5.18.0 at the time of writing). If F detects that the checkout is on a case insensitive file system, it will search from 5.005 to the most recent tagged stable release. Only .0 stable releases are used because these are the only stable releases that are parents of blead, and hence suitable for a bisect run. =item * --end I Most recent revision to test, as a I. If not specified, defaults to I. =item * --target I F target (or equivalent) needed, to run the test case. If specified, this should be one of =over 4 =item * I Don't build anything - just run the user test case against a clean checkout. Using this gives a couple of features that a plain C can't offer - automatic start revision detection, and test case C<--timeout>. =item * I Just run F<./Configure> =item * I Run the various F<*.SH> files to generate F, F, I. =item * I Build F. =item * I Use F to build F =item * I Build F (strictly, C<.$Config{so}>). As L is simple XS module present since 5.000, this provides a fast test of whether XS modules can be built. Note, XS modules are built by F, hence this target will not build F. =item * I Build F. This also builds pure-Perl modules in F, F and F. XS modules (such as L) are not built. =item * I Build everything needed to run the tests. This is the default if we're running test code, but is time consuming, as it means building all XS modules. For older Fs, the previous name of C is automatically substituted. For very old Fs, C is run, as there is no target provided to just get things ready, and for 5.004 and earlier the tests run very quickly. =item * A file ending C<.t> Build everything needed to run the tests, and then run this test script using F. This is actually implemented internally by using the target I, and setting the test case to "sh", "-c", "cd t && ./TEST ..." =back =item * --one-liner 'code to run' =item * -e 'code to run' Example code to run, just like you'd use with C. This prepends C<./perl -Ilib -e 'code to run'> to the test case given, or F<./miniperl> if I is C. (Usually you'll use C<-e> instead of providing a test case in the non-option arguments to F. You can repeat C<-e> on the command line, just like you can with C) C<-E> intentionally isn't supported, as it's an error in 5.8.0 and earlier, which interferes with detecting errors in the example code itself. =item * -c Add C<-c> to the command line, to cause perl to exit after syntax checking. =item * -l Add C<-l> to the command line with C<-e> This will automatically append a newline to every output line of your testcase. Note that you can't specify an argument to F's C<-l> with this, as it's not feasible to emulate F's somewhat quirky switch parsing with L. If you need the full flexibility of C<-l>, you need to write a full test case, instead of using C's C<-e> shortcut. =item * -w Add C<-w> to the command line with C<-e> It's not valid to pass C<-c>, C<-l> or C<-w> to C unless you are also using C<-e> =item * --expect-fail The test case should fail for the I revision, and pass for the I revision. The bisect run will find the first commit where it passes. =item * --crash Treat any non-crash as success, any crash as failure. (Crashing defined as exiting with a signal or a core dump.) =item * -D I =item * -U I =item * -A I Arguments (C<-A>, C<-D>, C<-U>) to pass to F. The C<-D>, C<-A> and C<-U> switches should be spelled as if you were normally giving them to F<./Configure>. For example, -Dnoextensions=Encode -Uusedevel -Accflags=-DNO_MATHOMS Repeated C<-A> arguments are passed through as is. C<-D> and C<-U> are processed in order, and override previous settings for the same parameter. F emulates C<-Dnoextensions> when F itself does not provide it, as it's often very useful to be able to disable some XS extensions. =item * --make I The C command to use. If this not set, F is used. If this is set, it also adds a C<-Dmake=...> else some recursive make invocations in extensions may fail. Typically one would use this as C<--make gmake> to use F in place of the system F. =item * --jobs I =item * -j I Number of C jobs to run in parallel. A value of 0 suppresses parallelism. If F exists and can be parsed, or F exists and reports C, or F exists and reports C<_NPROCESSORS_ONLN> defaults to 1 + I. On HP-UX with the system make defaults to 0, otherwise defaults to 2. =item * --match pattern =item * --no-match pattern Instead of running a test program to determine I or I, C<--match> will pass if the given regex matches, and hence search for the commit that removes the last matching file. C<--no-match> inverts the test, to search for the first commit that adds files that match. The remaining command line arguments are treated as glob patterns for files to match against. If none are specified, then they default as follows: =over 4 =item * If no I is specified, the match is against all files in the repository (which is fast). =item * If a I is specified, that target is built, and the match is against only the built files. =back Treating the command line arguments as glob patterns should not cause problems, as the perl distribution has never shipped or built files with names that contain characters which are globbing metacharacters. Anything which is not a readable file is ignored, instead of generating an error. (If you want an error, run C or C as a test case). This permits one to easily search in a file that changed its name. For example: .../Porting/bisect.pl --match 'Pod.*Functions' 'pod/buildtoc*' C<--no-match ...> is implemented as C<--expect-fail --match ...> =item * --valgrind Run the test program under C. If you need to test for memory errors when parsing invalid programs, the default parser fail exit code of 255 will always override C, so try putting the test case invalid code inside a I C, so that the perl interpreter will exit with 0. (Be sure to check the output of $@, to avoid missing mistakes such as unintended C failures due to incorrect C<@INC>) Specifically, this option prepends C C<--error-exitcode=124> to the command line that runs the testcase, to cause valgrind to exit non-zero if it detects errors, with the assumption that the test program itself always exits with zero. If you require more flexibility than this, either specify your C invocation explicitly as part of the test case, or use a wrapper script to control the command line or massage the exit codes. In order for the test program to be seen as a perl script to valgrind (rather than a shell script), the first line must be one of the following #!./perl #!./miniperl =item * --test-build Test that the build completes, without running any test case. By default, if the build for the desired I fails to complete, F reports a I back to C, the assumption being that one wants to find a commit which changed state "builds && passes" to "builds && fails". If instead one is interested in which commit broke the build (possibly for particular F options), use I<--test-build> to treat a build failure as a failure, not a "skip". Often this option isn't as useful as it first seems, because I build failure will be reported to C as a failure, not just the failure that you're interested in. Generally, to debug a particular problem, it's more useful to use a I that builds properly at the point of interest, and then a test case that runs C. For example: .../Porting/bisect.pl --start=perl-5.000 --end=perl-5.002 \ --expect-fail --force-manifest --target=miniperl make perl will find the first revision capable of building L and then F, without becoming confused by revisions where F won't even link. =item * --module module1,module2,... Install this (or these) module(s), die when it (the last of those) cannot be updated to the current version. Misnomer. the argument can be any argument that can be passed to CPAN shell's install command. B: since we only have the uptodate command to verify that an install has taken place, we are unable to determine success for arguments like MSCHWERN/Test-Simple-1.005000_005.tar.gz. In so far, it is not such a misnomer. Note that this and I<--with-module> will both require a C. If F<$ENV{HOME}/.cpan/CPAN/MyConfig.pm> does not exist, a CPAN shell will be started up for you so you can configure one. Feel free to let CPAN pick defaults for you. Enter 'quit' when you are done, and then everything should be all set. Alternatively, you may specify a custom C by using I<--cpan-config-dir>. Also, if you want to bisect a module that needs a display (like TK) and you don't want random screens appearing and disappearing on your computer while you're working, you can do something like this: In a terminal: $ while true; do date ; if ! ps auxww | grep -v grep \ | grep -q Xvfb; then Xvfb :121 & fi; echo -n 'sleeping 60 '; \ sleep 60; done And then: DISPLAY=":121" .../Porting/bisect.pl --module=TK (Some display alternatives are vncserver and Xnest.) =item * --with-module module1,module2,... Like I<--module> above, except this simply installs the requested modules and they can then be used in other tests. For example: .../Porting/bisect.pl --with-module=Moose -e 'use Moose; ...' =item * --no-module-tests Use in conjunction with I<--with-module> to install the modules without running their tests. This can be a big time saver. For example: .../Porting/bisect.pl --with-module=Moose --no-module-tests \ -e 'use Moose; ...' =item * --test-module This is like I<--module>, but just runs the module's tests, instead of installing it. WARNING: This is a somewhat experimental option, known to work on recent CPAN shell versions. If you use this option and strange things happen, please report them. Usually, you can just use I<--module>, but if you are getting inconsistent installation failures and you just want to see when the tests started failing, you might find this option useful. =item * --cpan-config-dir /home/blah/custom If defined, this will cause L to look for F inside of the specified directory, instead of using the default config of F<$ENV{HOME}/.cpan/>. If no default config exists, a L shell will be fired up for you to configure things. Letting L automatically configure things for you should work well enough. You probably want to choose I instead of I if it asks. When you're finished with configuration, just type I and hit I and the bisect should continue. =item * --force-manifest By default, a build will "skip" if any files listed in F are not present. Usually this is useful, as it avoids false-failures. However, there are some long ranges of commits where listed files are missing, which can cause a bisect to abort because all that remain are skipped revisions. In these cases, particularly if the test case uses F and no modules, it may be more useful to force the build to continue, even if files F are missing. =item * --force-regen Run C before building F. This may fix a build that otherwise would skip because the generated headers at that revision are stale. It's not the default because it conceals this error in the true state of such revisions. =item * --expect-pass [0|1] C<--expect-pass=0> is equivalent to C<--expect-fail>. I<1> is the default. =item * --timeout I Run the testcase with the given timeout. If this is exceeded, kill it (and by default all its children), and treat it as a failure. =item * --setpgrp Run the testcase in its own process group. Specifically, call C just before C-ing the user testcase. The default is not to set the process group, unless a timeout is used. =item * --all-fixups F will minimally patch various files on a platform and version dependent basis to get the build to complete. Normally it defers doing this as long as possible - C<.SH> files aren't patched until after F is run, and C and C code isn't patched until after F is built. If C<--all-fixups> is specified, all the fixups are done before running C. In rare cases adding this may cause a bisect to abort, because an inapplicable patch or other fixup is attempted for a revision which would usually have already Iped. If this happens, please report it as a bug, giving the OS and problem revision. =item * --early-fixup file =item * --late-fixup file Specify a file containing a patch or other fixup for the source code. The action to take depends on the first line of the fixup file =over 4 =item * C<#!perl> If the first line starts C<#!perl> then the file is run using C<$^X> =item * C<#!/absolute/path> If a shebang line is present the file is executed using C =item * C =~ /I/> =item * C !~ /I/> If I does not exist then the fixup file's contents are ignored. Otherwise, for C<=~>, if it contains a line matching I, then the file is fed to C on standard input. For C<=~>, the patch is applied if no lines match the pattern. As the empty pattern in Perl is a special case (it matches the most recent successful match) which is not useful here, the treatment of an empty pattern is special-cased. C =~ //> applies the patch if filename is present. C !~ //> applies the patch if filename missing. This makes it easy to unconditionally apply patches to files, and to use a patch as a way of creating a new file. =item * Otherwise, the file is assumed to be a patch, and always applied. =back Is are applied before F<./Configure> is run. Is are applied just after F<./Configure> is run. These options can be specified more than once. I is actually expanded as a glob pattern. Globs that do not match are errors, as are missing files. =item * --no-clean Tell F not to clean up after the build. This allows one to use F to build the current particular perl revision for interactive testing, or for debugging F. Passing this to F will likely cause the bisect to fail badly. =item * --validate Test that all stable (.0) revisions can be built. By default, attempts to build I, then tagged stable releases in reverse order down to I (or I on a case insensitive file system). Stops at the first failure, without cleaning the checkout. Use I<--start> to specify the earliest revision to test, I<--end> to specify the most recent. Useful for validating a new OS/CPU/compiler combination. For example ../perl/Porting/bisect.pl --validate -le 'print "Hello from $]"' If no testcase is specified, the default is to use F to run F =item * --check-args Validate the options and arguments, and exit silently if they are valid. =item * --check-shebang Validate that the test case isn't an executable file with a C<#!/usr/bin/perl> line (or similar). As F does B automatically prepend C<./perl> to the test case, a I<#!> line specifying an external F binary will cause the test case to always run with I F, not the F built by the bisect runner. Likely this is not what you wanted. If your test case is actually a wrapper script to run other commands, you should run it with an explicit interpreter, to be clear. For example, instead of C<../perl/Porting/bisect.pl ~/test/testcase.pl> you'd run C<../perl/Porting/bisect.pl /usr/bin/perl ~/test/testcase.pl> =item * --gold Revision to use when checking out known-good recent versions of files, such as F. F defaults this to I, but F will default it to the most recent stable release. =item * --usage =item * --help =item * -? Display the usage information and exit. =back =head1 EXAMPLES =head2 Code has started to crash under C =over 4 =item * Problem Under C (but not under C), F was failing to compile. What was the first commit at which that compilation failure could be observed? =item * Solution Extract code from the test file at the point where C<./miniperl -Ilib -c> was showing a compilation failure. Use that in bisection with the C target. .../Porting/bisect.pl --target=miniperl --start=2ec4590e \ -e 'q|ace| =~ /c(?=.$)/; $#{^CAPTURE} == -1); exit 0;' =item * Reference L =back =head2 Blead breaks CPAN on threaded builds only =over 4 =item * Problem Tests in CPAN module XML::Parser's test suite had begun to fail when tested against blead in threaded builds only. =item * Solution Provide F-style switch to bisection program. Straightforward use of the C<--module> switch. .../Porting/bisect.pl -Duseithreads \ --start=6256cf2c \ --end=f6f85064 \ --module=XML::Parser =item * Reference L =back =head2 Point in time where code started to segfault is unknown =over 4 =item * Problem User submitted code sample which when run caused F to segfault, but did not claim that this was a recent change. =item * Solution Used locally installed production releases of perl (previously created by F) to identify the first production release at which the code would not compile. Used that information to shorten bisection time. .../perl Porting/bisect.pl \ --start=v5.14.4 \ --end=v5.16.3 \ --crash -- ./perl -Ilib /tmp/gh-17333-map.pl $ cat gh-17333-map.pl @N = 1..5; map { pop @N } @N; =item * Reference L =back =head2 When did perl start failing to build on a certain platform using C as the C-compiler? =over 4 =item * Problem On NetBSD-8.0, C had never been smoke-tested using C as the C-compiler. Once this was done, it became evident that changes in that version of the operating system's code were incompatible with some C source written long before that OS version was ever released! =item * Solution Bisection range was first narrowed using existing builds at release tags. Then, bisection specified the C-compiler via C-style switch and used C<--test-build> to identify the commit which "broke" the build. .../perl Porting/bisect.pl \ -Dcc=g++ \ --test-build \ --start=v5.21.6 \ --end=v5.21.7 Then, problem was discussed with knowledgeable NetBSD user. =item * Reference L =back =head2 When did a test file start to emit warnings? =over 4 =item * Problem When F was run as part of C, we observed warnings not previously seen. At what commit were those warnings first emitted? =item * Solution We know that when this test file was first committed to blead, no warnings were observed and there was no output to C. So that commit becomes the value for C<--start>. Since the test file in question is for a CPAN distribution maintained by core, we must prepare to run that test by including C<--target=test_prep> in the bisection invocation. We then run the test file in a way that captures C in a file. If that file has non-zero size, then we have presumably captured the newly seen warnings. export ERR="/tmp/err" .../perl Porting/bisect.pl \ --start=507614678018ae1abd55a22e9941778c65741ba3 \ --end=d34b46d077dcfc479c36f65b196086abd7941c76 \ --target=test_prep \ -e 'chdir("t"); system( "./perl harness ../dist/Tie-File/t/43_synopsis.t 2>$ENV{ERR}" ); -s $ENV{ERR} and die "See $ENV{ERR} for warnings thrown";' Bisection pointed to a commit where strictures and warnings were first turned on throughout the F directory. =item * Reference L =back =cut # Ensure we always exit with 255, to cause git bisect to abort. sub croak_255 { my $message = join '', @_; if ($message =~ /\n\z/) { print STDERR $message; } else { my (undef, $file, $line) = caller 1; print STDERR "@_ at $file line $line\n"; } exit 255; } sub die_255 { croak_255(@_); } die_255("$0: Can't build $target") if defined $target && !grep {@targets} $target; foreach my $phase (qw(early late)) { next unless $options{"$phase-fixup"}; my $bail_out; require File::Glob; my @expanded; foreach my $glob (@{$options{"$phase-fixup"}}) { my @got = File::Glob::bsd_glob($glob); push @expanded, @got ? @got : $glob; } @expanded = sort @expanded; $options{"$phase-fixup"} = \@expanded; foreach (@expanded) { unless (-f $_) { print STDERR "$phase-fixup '$_' is not a readable file\n"; ++$bail_out; } } exit 255 if $bail_out; } unless (exists $defines{cc}) { # If it fails, the heuristic of 63f9ec3008baf7d6 is noisy, and hence # confusing. # FIXME - really it should be replaced with a proper test of # "can we build something?" and a helpful diagnostic if we can't. # For now, simply move it here. $defines{cc} = (`ccache -V`, $?) ? 'cc' : 'ccache cc'; } my $j = $options{jobs} ? "-j$options{jobs}" : ''; if (exists $options{make}) { if (!exists $defines{make}) { $defines{make} = $options{make}; } } else { $options{make} = 'make'; } # Sadly, however hard we try, I don't think that it will be possible to build # modules in ext/ on x86_64 Linux before commit e1666bf5602ae794 on 1999/12/29, # which updated to MakeMaker 3.7, which changed from using a hard coded ld # in the Makefile to $(LD). On x86_64 Linux the "linker" is gcc. sub open_or_die { my $file = shift; my $mode = @_ ? shift : '<'; open my $fh, $mode, $file or croak_255("Can't open $file: $!"); ${*$fh{SCALAR}} = $file; return $fh; } sub close_or_die { my $fh = shift; return if close $fh; croak_255("Can't close: $!") unless ref $fh eq 'GLOB'; croak_255("Can't close ${*$fh{SCALAR}}: $!"); } sub system_or_die { my $command = '{name}; $name = "@_" unless defined $name; my $setgrp = $options->{setpgrp}; if ($options->{timeout}) { # Unless you explicitly disabled it on the commandline, set it: $setgrp = 1 unless defined $setgrp; } my $pid = fork; die_255("Can't fork: $!") unless defined $pid; if (!$pid) { if (exists $options->{stdin}) { open STDIN, '<', $options->{stdin} or die "Can't open STDIN from $options->{stdin}: $!"; } if ($setgrp) { setpgrp 0, 0 or die "Can't setpgrp 0, 0: $!"; } { exec @_ }; die_255("Failed to start $name: $!"); } my $start; if ($options->{timeout}) { require Errno; require POSIX; die_255("No POSIX::WNOHANG") unless &POSIX::WNOHANG; $start = time; $SIG{ALRM} = sub { my $victim = $setgrp ? -$pid : $pid; my $delay = 1; kill 'TERM', $victim; waitpid(-1, &POSIX::WNOHANG); while (kill 0, $victim) { sleep $delay; waitpid(-1, &POSIX::WNOHANG); $delay *= 2; if ($delay > 8) { if (kill 'KILL', $victim) { print STDERR "$0: Had to kill 'KILL', $victim\n" } elsif (! $!{ESRCH}) { print STDERR "$0: kill 'KILL', $victim failed: $!\n"; } last; } } report_and_exit(0, 'No timeout', 'Timeout', "when running $name"); }; alarm $options->{timeout}; } waitpid $pid, 0 or die_255("wait for $name, pid $pid failed: $!"); alarm 0; if ($options->{timeout}) { my $elapsed = time - $start; if ($elapsed / $options->{timeout} > 0.8) { print STDERR "$0: Beware, took $elapsed seconds of $options->{timeout} permitted to run $name\n"; } } return $?; } sub extract_from_file { my ($file, $rx, $default) = @_; my $fh = open_or_die($file); while (<$fh>) { my @got = $_ =~ $rx; return wantarray ? @got : $got[0] if @got; } return $default if defined $default; return; } sub edit_file { my ($file, $munger) = @_; local $/; my $fh = open_or_die($file); my $orig = <$fh>; die_255("Can't read $file: $!") unless defined $orig && close $fh; my $new = $munger->($orig); return if $new eq $orig; $fh = open_or_die($file, '>'); print $fh $new or die_255("Can't print to $file: $!"); close_or_die($fh); } # AIX supplies a pre-historic patch program, which certainly predates Linux # and is probably older than NT. It can't cope with unified diffs. Meanwhile, # it's hard enough to get git diff to output context diffs, let alone git show, # and nearly all the patches embedded here are unified. So it seems that the # path of least resistance is to convert unified diffs to context diffs: sub process_hunk { my ($from_out, $to_out, $has_from, $has_to, $delete, $add) = @_; ++$$has_from if $delete; ++$$has_to if $add; if ($delete && $add) { $$from_out .= "! $_\n" foreach @$delete; $$to_out .= "! $_\n" foreach @$add; } elsif ($delete) { $$from_out .= "- $_\n" foreach @$delete; } elsif ($add) { $$to_out .= "+ $_\n" foreach @$add; } } # This isn't quite general purpose, as it can't cope with # '\ No newline at end of file' sub ud2cd { my $diff_in = shift; my $diff_out = ''; # Stuff before the diff while ($diff_in =~ s/\A(?!\*\*\* )(?!--- )([^\n]*\n?)//ms && length $1) { $diff_out .= $1; } if (!length $diff_in) { die_255("That didn't seem to be a diff"); } if ($diff_in =~ /\A\*\*\* /ms) { warn "Seems to be a context diff already\n"; return $diff_out . $diff_in; } # Loop for files FILE: while (1) { if ($diff_in =~ s/\A((?:diff |index )[^\n]+\n)//ms) { $diff_out .= $1; next; } if ($diff_in !~ /\A--- /ms) { # Stuff after the diff; return $diff_out . $diff_in; } $diff_in =~ s/\A([^\n]+\n?)//ms; my $line = $1; die_255("Can't parse '$line'") unless $line =~ s/\A--- /*** /ms; $diff_out .= $line; $diff_in =~ s/\A([^\n]+\n?)//ms; $line = $1; die_255("Can't parse '$line'") unless $line =~ s/\A\+\+\+ /--- /ms; $diff_out .= $line; # Loop for hunks while (1) { next FILE unless $diff_in =~ s/\A\@\@ (-([0-9]+),([0-9]+) \+([0-9]+),([0-9]+)) \@\@[^\n]*\n?//; my ($hunk, $from_start, $from_count, $to_start, $to_count) = ($1, $2, $3, $4, $5); my $from_end = $from_start + $from_count - 1; my $to_end = $to_start + $to_count - 1; my ($from_out, $to_out, $has_from, $has_to, $add, $delete); while (length $diff_in && ($from_count || $to_count)) { die_255("Confused in $hunk") unless $diff_in =~ s/\A([^\n]*)\n//ms; my $line = $1; $line = ' ' unless length $line; if ($line =~ /^ .*/) { process_hunk(\$from_out, \$to_out, \$has_from, \$has_to, $delete, $add); undef $delete; undef $add; $from_out .= " $line\n"; $to_out .= " $line\n"; --$from_count; --$to_count; } elsif ($line =~ /^-(.*)/) { push @$delete, $1; --$from_count; } elsif ($line =~ /^\+(.*)/) { push @$add, $1; --$to_count; } else { die_255("Can't parse '$line' as part of hunk $hunk"); } } process_hunk(\$from_out, \$to_out, \$has_from, \$has_to, $delete, $add); die_255("No lines in hunk $hunk") unless length $from_out || length $to_out; die_255("No changes in hunk $hunk") unless $has_from || $has_to; $diff_out .= "***************\n"; $diff_out .= "*** $from_start,$from_end ****\n"; $diff_out .= $from_out if $has_from; $diff_out .= "--- $to_start,$to_end ----\n"; $diff_out .= $to_out if $has_to; } } } { my $use_context; sub placate_patch_prog { my $patch = shift; if (!defined $use_context) { my $version = `patch -v 2>&1`; die_255("Can't run `patch -v`, \$?=$?, bailing out") unless defined $version; if ($version =~ /Free Software Foundation/) { $use_context = 0; } elsif ($version =~ /Header: patch\.c,v.*\blwall\b/) { # The system patch is older than Linux, and probably older than # Windows NT. $use_context = 1; } elsif ($version =~ /Header: patch\.c,v.*\babhinav\b/) { # Thank you HP. No, we have no idea *which* version this is: # $Header: patch.c,v 76.1.1.2.1.3 2001/12/03 12:24:52 abhinav Exp $ $use_context = 1; } else { # Don't know. $use_context = 0; } } return $use_context ? ud2cd($patch) : $patch; } } sub apply_patch { my ($patch, $what, $files) = @_; $what = 'patch' unless defined $what; unless (defined $files) { $patch =~ m!^--- [ab]/(\S+)\n\+\+\+ [ba]/\1!sm; $files = " $1"; } my $patch_to_use = placate_patch_prog($patch); open my $fh, '|-', 'patch', '-p1' or die_255("Can't run patch: $!"); print $fh $patch_to_use; return if close $fh; print STDERR "Patch is <<'EOPATCH'\n${patch}EOPATCH\n"; print STDERR "\nConverted to a context diff <<'EOCONTEXT'\n${patch_to_use}EOCONTEXT\n" if $patch_to_use ne $patch; die_255("Can't $what$files: $?, $!"); } sub apply_commit { my ($commit, @files) = @_; my $patch = `git show $commit @files`; if (!defined $patch) { die_255("Can't get commit $commit for @files: $?") if @files; die_255("Can't get commit $commit: $?"); } apply_patch($patch, "patch $commit", @files ? " for @files" : ''); } sub revert_commit { my ($commit, @files) = @_; my $patch = `git show -R $commit @files`; if (!defined $patch) { die_255("Can't get revert commit $commit for @files: $?") if @files; die_255("Can't get revert commit $commit: $?"); } apply_patch($patch, "revert $commit", @files ? " for @files" : ''); } sub checkout_file { my ($file, $commit) = @_; $commit ||= $options{gold} || 'blead'; system "git show $commit:$file > $file ; return if $line =~ $run_with_our_perl; if (!-x $file) { die_255("$file is not executable. system($file, ...) is always going to fail. Bailing out"); } return unless $line =~ m{\A#!(/\S+/perl\S*)\s}; die_255("$file will always be run by $1 It won't be tested by the ./perl we build. If you intended to run it with that perl binary, please change your test case to $1 @ARGV If you intended to test it with the ./perl we build, please change your test case to ./perl -Ilib @ARGV [You may also need to add -- before ./perl to prevent that -Ilib as being parsed as an argument to bisect.pl] Bailing out"); } sub clean { if ($options{clean}) { # Needed, because files that are build products in this checked out # version might be in git in the next desired version. system 'git clean -qdxf $options{setpgrp}, timeout => $options{timeout}, }, @_); $ret &= 0xff if $options{crash}; report_and_exit(!$ret, 'zero exit from', 'non-zero exit from', "@_"); } sub match_and_exit { my ($target, @globs) = @_; my $matches = 0; my $re = qr/$match/; my @files; if (@globs) { require File::Glob; foreach (sort map { File::Glob::bsd_glob($_)} @globs) { if (!-f $_ || !-r _) { warn "Skipping matching '$_' as it is not a readable file\n"; } else { push @files, $_; } } } else { local $/ = "\0"; @files = defined $target ? `git ls-files -o -z`: `git ls-files -z`; chomp @files; } foreach my $file (@files) { my $fh = open_or_die($file); while (<$fh>) { if ($_ =~ $re) { ++$matches; if (/[^[:^cntrl:]\h\v]/) { # Matches non-spacing non-C1 controls print "Binary file $file matches\n"; } else { $_ .= "\n" unless /\n\z/; print "$file: $_"; } } } close_or_die($fh); } report_and_exit($matches, $matches == 1 ? '1 match for' : "$matches matches for", 'no matches for', $match); } # Not going to assume that system perl is yet new enough to have autodie system_or_die('git clean -dxf'); if (!defined $target) { match_and_exit(undef, @ARGV) if $match; $target = 'test_prep'; } elsif ($target eq 'none') { match_and_exit(undef, @ARGV) if $match; run_report_and_exit(@ARGV); } skip('no Configure - is this the //depot/perlext/Compiler branch?') unless -f 'Configure'; my $case_insensitive; { my ($dev_C, $ino_C) = stat 'Configure'; die_255("Could not stat Configure: $!") unless defined $dev_C; my ($dev_c, $ino_c) = stat 'configure'; ++$case_insensitive if defined $dev_c && $dev_C == $dev_c && $ino_C == $ino_c; } # This changes to PERL_VERSION in 4d8076ea25903dcb in 1999 my $major = extract_from_file('patchlevel.h', qr/^#define\s+(?:PERL_VERSION|PATCHLEVEL)\s+(\d+)\s/, 0); my $unfixable_db_file; if ($major < 10 && !extract_from_file('ext/DB_File/DB_File.xs', qr!^#else /\* Berkeley DB Version > 2 \*/$!)) { # This DB_File.xs is really too old to patch up. # Skip DB_File, unless we're invoked with an explicit -Unoextensions if (!exists $defines{noextensions}) { $defines{noextensions} = 'DB_File'; } elsif (defined $defines{noextensions}) { $defines{noextensions} .= ' DB_File'; } ++$unfixable_db_file; } patch_Configure(); patch_hints(); if ($options{'all-fixups'}) { patch_SH(); patch_C(); patch_ext(); } apply_fixups($options{'early-fixup'}); # if Encode is not needed for the test, you can speed up the bisect by # excluding it from the runs with -Dnoextensions=Encode # ccache is an easy win. Remove it if it causes problems. # Commit 1cfa4ec74d4933da adds ignore_versioned_solibs to Configure, and sets it # to true in hints/linux.sh # On dromedary, from that point on, Configure (by default) fails to find any # libraries, because it scans /usr/local/lib /lib /usr/lib, which only contain # versioned libraries. Without -lm, the build fails. # Telling /usr/local/lib64 /lib64 /usr/lib64 works from that commit onwards, # until commit faae14e6e968e1c0 adds it to the hints. # However, prior to 1cfa4ec74d4933da telling Configure the truth doesn't work, # because it will spot versioned libraries, pass them to the compiler, and then # bail out pretty early on. Configure won't let us override libswanted, but it # will let us override the entire libs list. foreach (@{$options{A}}) { push @paths, $1 if /^libpth=(.*)/s; } unless (extract_from_file('Configure', 'ignore_versioned_solibs')) { # Before 1cfa4ec74d4933da, so force the libs list. my @libs; # This is the current libswanted list from Configure, less the libs removed # by current hints/linux.sh foreach my $lib (qw(sfio socket inet nsl nm ndbm gdbm dbm db malloc dl ld sun m crypt sec util c cposix posix ucb BSD)) { foreach my $dir (@paths) { # Note the wonderful consistency of dot-or-not in the config vars: next unless -f "$dir/lib$lib.$Config{dlext}" || -f "$dir/lib$lib$Config{lib_ext}"; push @libs, "-l$lib"; last; } } $defines{libs} = \@libs unless exists $defines{libs}; } $defines{usenm} = undef if $major < 2 && !exists $defines{usenm}; my ($missing, $created_dirs); ($missing, $created_dirs) = force_manifest() if $options{'force-manifest'}; my @ARGS = '-dEs'; foreach my $key (sort keys %defines) { my $val = $defines{$key}; if (ref $val) { push @ARGS, "-D$key=@$val"; } elsif (!defined $val) { push @ARGS, "-U$key"; } elsif (!length $val) { push @ARGS, "-D$key"; } else { $val = "" if $val eq "\0"; push @ARGS, "-D$key=$val"; } } push @ARGS, map {"-A$_"} @{$options{A}}; my $prefix; # Testing a module? We need to install perl/cpan modules to a temp dir if ($options{module} || $options{'with-module'} || $options{'test-module'}) { $prefix = tempdir(CLEANUP => 1); push @ARGS, "-Dprefix=$prefix"; push @ARGS, "-Uversiononly", "-Dinstallusrbinperl=n"; } # If a file in MANIFEST is missing, Configure asks if you want to # continue (the default being 'n'). With stdin closed or /dev/null, # it exits immediately and the check for config.sh below will skip. # Without redirecting stdin, the commands called will attempt to read from # stdin (and thus effectively hang) run_with_options({stdin => '/dev/null', name => 'Configure'}, './Configure', @ARGS); patch_SH() unless $options{'all-fixups'}; apply_fixups($options{'late-fixup'}); if (-f 'config.sh') { # Emulate noextensions if Configure doesn't support it. fake_noextensions() if $major < 10 && $defines{noextensions}; if (system './Configure -S') { # See commit v5.23.5-89-g7a4fcb3. Configure may try to run # ./optdef.sh instead of UU/optdef.sh. Copying the file is # easier than patching Configure (which mentions optdef.sh multi- # ple times). require File::Copy; File::Copy::copy("UU/optdef.sh", "./optdef.sh"); system_or_die('./Configure -S'); } } if ($target =~ /config\.s?h/) { match_and_exit($target, @ARGV) if $match && -f $target; report_and_exit(-f $target, 'could build', 'could not build', $target) if $options{'test-build'}; skip("could not build $target") unless -f $target; run_report_and_exit(@ARGV); } elsif (!-f 'config.sh') { # Skip if something went wrong with Configure skip('could not build config.sh'); } force_manifest_cleanup($missing, $created_dirs) if $missing; if($options{'force-regen'} && extract_from_file('Makefile', qr/\bregen_headers\b/)) { # regen_headers was added in e50aee73b3d4c555, patch.1m for perl5.001 # It's not worth faking it for earlier revisions. system_or_die('make regen_headers'); } unless ($options{'all-fixups'}) { patch_C(); patch_ext(); } # Parallel build for miniperl is safe system "$options{make} $j miniperl ' fails, and # Makefile tries to run minitest. # Of course, helpfully sometimes it's called ../perl, other times .././perl # and who knows if that list is exhaustive... my ($dev0, $ino0) = stat 't/perl'; my ($dev1, $ino1) = stat 'perl'; unless (defined $dev0 && defined $dev1 && $dev0 == $dev1 && $ino0 == $ino1) { undef $expected_file_found; my $link = readlink $expected_file; warn "'t/perl' => '$link', not 'perl'"; die_255("Could not realink t/perl: $!") unless defined $link; } } my $just_testing = 0; if ($options{'test-build'}) { report_and_exit($expected_file_found, 'could build', 'could not build', $real_target); } elsif (!$expected_file_found) { skip("could not build $real_target"); } elsif (my $mod_opt = $options{module} || $options{'with-module'} || ($just_testing++, $options{'test-module'})) { # Testing a cpan module? See if it will install # First we need to install this perl somewhere system_or_die('./installperl'); my @m = split(',', $mod_opt); my $bdir = File::Temp::tempdir( CLEANUP => 1, ) or die $!; # Don't ever stop to ask the user for input $ENV{AUTOMATED_TESTING} = 1; $ENV{PERL_MM_USE_DEFAULT} = 1; # Don't let these interfere with our cpan installs delete $ENV{PERL_MB_OPT}; delete $ENV{PERL_MM_OPT}; # Make sure we load up our CPAN::MyConfig and then # override the build_dir so we have a fresh one # every build my $cdir = $options{'cpan-config-dir'} || File::Spec->catfile($ENV{HOME},".cpan"); my @cpanshell = ( "$prefix/bin/perl", "-I", "$cdir", "-MCPAN::MyConfig", "-MCPAN", "-e","\$CPAN::Config->{build_dir}=q{$bdir};", "-e", ); for (@m) { s/-/::/g if /-/ and !m|/|; } my $install = join ",", map { "'$_'" } @m; if ($just_testing) { $install = "test($install)"; } elsif ($options{'no-module-tests'}) { $install = "notest('install',$install)"; } else { $install = "install($install)"; } my $last = $m[-1]; my $status_method = $just_testing ? 'test' : 'uptodate'; my $shellcmd = "$install; die unless CPAN::Shell->expand(Module => '$last')->$status_method;"; if ($options{module} || $options{'test-module'}) { run_report_and_exit(@cpanshell, $shellcmd); } else { my $ret = run_with_options({setprgp => $options{setpgrp}, timeout => $options{timeout}, }, @cpanshell, $shellcmd); $ret &= 0xff if $options{crash}; # Failed? Give up if ($ret) { report_and_exit(!$ret, 'zero exit from', 'non-zero exit from', "@_"); } } } match_and_exit($real_target, @ARGV) if $match; if (defined $options{'one-liner'}) { my $exe = $target =~ /^(?:perl$|test)/ ? 'perl' : 'miniperl'; unshift @ARGV, map {('-e', $_)} @{$options{'one-liner'}}; foreach (qw(c l w)) { unshift @ARGV, "-$_" if $options{$_}; } unshift @ARGV, "./$exe", '-Ilib'; } if (-f $ARGV[0]) { my $fh = open_or_die($ARGV[0]); my $line = <$fh>; unshift @ARGV, $1, '-Ilib' if $line =~ $run_with_our_perl; } if ($options{valgrind}) { # Turns out to be too confusing to use an optional argument with the path # of the valgrind binary, as if --valgrind takes an optional argument, # then specifying it as the last option eats the first part of the testcase. # ie this: .../bisect.pl --valgrind testcase # is treated as --valgrind=testcase and as there is no test case given, # it's an invalid commandline, bailing out with the usage message. # Currently, the test script can't signal a skip with 125, so anything # non-zero would do. But to keep that option open in future, use 124 unshift @ARGV, 'valgrind', '--error-exitcode=124'; } # This is what we came here to run: if (exists $Config{ldlibpthname}) { require Cwd; my $varname = $Config{ldlibpthname}; my $cwd = Cwd::getcwd(); if (defined $ENV{$varname}) { $ENV{$varname} = $cwd . $Config{path_sep} . $ENV{$varname}; } else { $ENV{$varname} = $cwd; } } run_report_and_exit(@ARGV); ############################################################################ # # Patching, editing and faking routines only below here. # ############################################################################ sub fake_noextensions { edit_file('config.sh', sub { my @lines = split /\n/, shift; my @ext = split /\s+/, $defines{noextensions}; foreach (@lines) { next unless /^extensions=/ || /^dynamic_ext/; foreach my $ext (@ext) { s/\b$ext( )?\b/$1/; } } return join "\n", @lines; }); } sub force_manifest { my (@missing, @created_dirs); my $fh = open_or_die('MANIFEST'); while (<$fh>) { next unless /^(\S+)/; # -d is special case needed (at least) between 27332437a2ed1941 and # bf3d9ec563d25054^ inclusive, as manifest contains ext/Thread/Thread push @missing, $1 unless -f $1 || -d $1; } close_or_die($fh); foreach my $pathname (@missing) { my @parts = split '/', $pathname; my $leaf = pop @parts; my $path = '.'; while (@parts) { $path .= '/' . shift @parts; next if -d $path; mkdir $path, 0700 or die_255("Can't create $path: $!"); unshift @created_dirs, $path; } $fh = open_or_die($pathname, '>'); close_or_die($fh); chmod 0, $pathname or die_255("Can't chmod 0 $pathname: $!"); } return \@missing, \@created_dirs; } sub force_manifest_cleanup { my ($missing, $created_dirs) = @_; # This is probably way too paranoid: my @errors; require Fcntl; foreach my $file (@$missing) { my (undef, undef, $mode, undef, undef, undef, undef, $size) = stat $file; if (!defined $mode) { push @errors, "Added file $file has been deleted by Configure"; next; } if (Fcntl::S_IMODE($mode) != 0) { push @errors, sprintf 'Added file %s had mode changed by Configure to %03o', $file, $mode; } if ($size != 0) { push @errors, "Added file $file had sized changed by Configure to $size"; } unlink $file or die_255("Can't unlink $file: $!"); } foreach my $dir (@$created_dirs) { rmdir $dir or die_255("Can't rmdir $dir: $!"); } skip("@errors") if @errors; } sub patch_Configure { if ($major < 1) { if (extract_from_file('Configure', qr/^\t\t\*=\*\) echo "\$1" >> \$optdef;;$/)) { # This is " Spaces now allowed in -D command line options.", # part of commit ecfc54246c2a6f42 apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 3d3b38d..78ffe16 100755 --- a/Configure +++ b/Configure @@ -652,7 +777,8 @@ while test $# -gt 0; do echo "$me: use '-U symbol=', not '-D symbol='." >&2 echo "$me: ignoring -D $1" >&2 ;; - *=*) echo "$1" >> $optdef;; + *=*) echo "$1" | \ + sed -e "s/'/'\"'\"'/g" -e "s/=\(.*\)/='\1'/" >> $optdef;; *) echo "$1='define'" >> $optdef;; esac shift EOPATCH } if (extract_from_file('Configure', qr/^if \$contains 'd_namlen' \$xinc\b/)) { # Configure's original simple "grep" for d_namlen falls foul of the # approach taken by the glibc headers: # #ifdef _DIRENT_HAVE_D_NAMLEN # # define _D_EXACT_NAMLEN(d) ((d)->d_namlen) # # where _DIRENT_HAVE_D_NAMLEN is not defined on Linux. # This is also part of commit ecfc54246c2a6f42 apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 3d3b38d..78ffe16 100755 --- a/Configure +++ b/Configure @@ -3935,7 +4045,8 @@ $rm -f try.c : see if the directory entry stores field length echo " " -if $contains 'd_namlen' $xinc >/dev/null 2>&1; then +$cppstdin $cppflags $cppminus < "$xinc" > try.c +if $contains 'd_namlen' try.c >/dev/null 2>&1; then echo "Good, your directory entry keeps length information in d_namlen." >&4 val="$define" else EOPATCH } } if ($major < 2 && !extract_from_file('Configure', qr/Try to guess additional flags to pick up local libraries/)) { my $mips = extract_from_file('Configure', qr!(''\) if (?:\./)?mips; then)!); # This is part of perl-5.001n. It's needed, to add -L/usr/local/lib to # the ld flags if libraries are found there. It shifts the code to set # up libpth earlier, and then adds the code to add libpth entries to # ldflags # mips was changed to ./mips in ecfc54246c2a6f42, perl5.000 patch.0g apply_patch(sprintf <<'EOPATCH', $mips); diff --git a/Configure b/Configure index 53649d5..0635a6e 100755 --- a/Configure +++ b/Configure @@ -2749,6 +2749,52 @@ EOM ;; esac +: Set private lib path +case "$plibpth" in +'') if ./mips; then + plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib" + fi;; +esac +case "$libpth" in +' ') dlist='';; +'') dlist="$plibpth $glibpth";; +*) dlist="$libpth";; +esac + +: Now check and see which directories actually exist, avoiding duplicates +libpth='' +for xxx in $dlist +do + if $test -d $xxx; then + case " $libpth " in + *" $xxx "*) ;; + *) libpth="$libpth $xxx";; + esac + fi +done +$cat <<'EOM' + +Some systems have incompatible or broken versions of libraries. Among +the directories listed in the question below, please remove any you +know not to be holding relevant libraries, and add any that are needed. +Say "none" for none. + +EOM +case "$libpth" in +'') dflt='none';; +*) + set X $libpth + shift + dflt=${1+"$@"} + ;; +esac +rp="Directories to use for library searches?" +. ./myread +case "$ans" in +none) libpth=' ';; +*) libpth="$ans";; +esac + : flags used in final linking phase case "$ldflags" in '') if ./venix; then @@ -2765,6 +2811,23 @@ case "$ldflags" in ;; *) dflt="$ldflags";; esac + +: Possible local library directories to search. +loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib" +loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib" + +: Try to guess additional flags to pick up local libraries. +for thislibdir in $libpth; do + case " $loclibpth " in + *" $thislibdir "*) + case "$dflt " in + "-L$thislibdir ") ;; + *) dflt="$dflt -L$thislibdir" ;; + esac + ;; + esac +done + echo " " rp="Any additional ld flags (NOT including libraries)?" . ./myread @@ -2828,52 +2891,6 @@ n) echo "OK, that should do.";; esac $rm -f try try.* core -: Set private lib path -case "$plibpth" in -%s - plibpth="$incpath/usr/lib /usr/local/lib /usr/ccs/lib" - fi;; -esac -case "$libpth" in -' ') dlist='';; -'') dlist="$plibpth $glibpth";; -*) dlist="$libpth";; -esac - -: Now check and see which directories actually exist, avoiding duplicates -libpth='' -for xxx in $dlist -do - if $test -d $xxx; then - case " $libpth " in - *" $xxx "*) ;; - *) libpth="$libpth $xxx";; - esac - fi -done -$cat <<'EOM' - -Some systems have incompatible or broken versions of libraries. Among -the directories listed in the question below, please remove any you -know not to be holding relevant libraries, and add any that are needed. -Say "none" for none. - -EOM -case "$libpth" in -'') dflt='none';; -*) - set X $libpth - shift - dflt=${1+"$@"} - ;; -esac -rp="Directories to use for library searches?" -. ./myread -case "$ans" in -none) libpth=' ';; -*) libpth="$ans";; -esac - : compute shared library extension case "$so" in '') EOPATCH } if ($major == 4 && extract_from_file('Configure', qr/^d_gethbynam=/)) { # Fixes a bug introduced in 4599a1dedd47b916 apply_commit('3cbc818d1d0ac470'); } if ($major == 4 && extract_from_file('Configure', qr/gethbadd_addr_type=`echo \$gethbadd_addr_type/)) { # Fixes a bug introduced in 3fd537d4b944bc7a apply_commit('6ff9219da6cf8cfd'); } if ($major == 4 && extract_from_file('Configure', qr/^pthreads_created_joinable=/)) { # Fix for bug introduced in 52e1cb5ebf5e5a8c # Part of commit ce637636a41b2fef edit_file('Configure', sub { my $code = shift; $code =~ s{^pthreads_created_joinable=''} {d_pthreads_created_joinable=''}ms or die_255("Substitution failed"); $code =~ s{^pthreads_created_joinable='\$pthreads_created_joinable'} {d_pthreads_created_joinable='\$d_pthreads_created_joinable'}ms or die_255("Substitution failed"); return $code; }); } if ($major < 5 && extract_from_file('Configure', qr!if \$cc \$ccflags try\.c -o try >/dev/null 2>&1; then!)) { # Analogous to the more general fix of dfe9444ca7881e71 # Without this flags such as -m64 may not be passed to this compile, # which results in a byteorder of '1234' instead of '12345678', which # can then cause crashes. if (extract_from_file('Configure', qr/xxx_prompt=y/)) { # 8e07c86ebc651fe9 or later # ("This is my patch patch.1n for perl5.001.") apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 62249dd..c5c384e 100755 --- a/Configure +++ b/Configure @@ -8247,7 +8247,7 @@ main() } EOCP xxx_prompt=y - if $cc $ccflags try.c -o try >/dev/null 2>&1 && ./try > /dev/null; then + if $cc $ccflags $ldflags try.c -o try >/dev/null 2>&1 && ./try > /dev/null; then dflt=`./try` case "$dflt" in [1-4][1-4][1-4][1-4]|12345678|87654321) EOPATCH } else { apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 53649d5..f1cd64a 100755 --- a/Configure +++ b/Configure @@ -6362,7 +6362,7 @@ main() printf("\n"); } EOCP - if $cc $ccflags try.c -o try >/dev/null 2>&1 ; then + if $cc $ccflags $ldflags try.c -o try >/dev/null 2>&1 ; then dflt=`./try` case "$dflt" in ????|????????) echo "(The test program ran ok.)";; EOPATCH } } if ($major < 6 && !extract_from_file('Configure', qr!^\t-A\)$!)) { # This adds the -A option to Configure, which is incredibly useful # Effectively this is commits 02e93a22d20fc9a5, 5f83a3e9d818c3ad, # bde6b06b2c493fef, f7c3111703e46e0c and 2 lines of trailing whitespace # removed by 613d6c3e99b9decc, but applied at slightly different # locations to ensure a clean patch back to 5.000 # Note, if considering patching to the intermediate revisions to fix # bugs in -A handling, f7c3111703e46e0c is from 2002, and hence # $major == 8 # To add to the fun, early patches add -K and -O options, and it's not # trivial to get patch to put the C<. ./posthint.sh> in the right place edit_file('Configure', sub { my $code = shift; $code =~ s/(optstr = ")([^"]+";\s*# getopt-style specification)/$1A:$2/ or die_255("Substitution failed"); $code =~ s!^(: who configured the system)! touch posthint.sh . ./posthint.sh $1!ms or die_255("Substitution failed"); return $code; }); apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 4b55fa6..60c3c64 100755 --- a/Configure +++ b/Configure @@ -1150,6 +1150,7 @@ set X `for arg in "$@"; do echo "X$arg"; done | eval "set $*" shift rm -f options.awk +rm -f posthint.sh : set up default values fastread='' @@ -1172,6 +1173,56 @@ while test $# -gt 0; do case "$1" in -d) shift; fastread=yes;; -e) shift; alldone=cont;; + -A) + shift + xxx='' + yyy="$1" + zzz='' + uuu=undef + case "$yyy" in + *=*) zzz=`echo "$yyy"|sed 's!=.*!!'` + case "$zzz" in + *:*) zzz='' ;; + *) xxx=append + zzz=" "`echo "$yyy"|sed 's!^[^=]*=!!'` + yyy=`echo "$yyy"|sed 's!=.*!!'` ;; + esac + ;; + esac + case "$xxx" in + '') case "$yyy" in + *:*) xxx=`echo "$yyy"|sed 's!:.*!!'` + yyy=`echo "$yyy"|sed 's!^[^:]*:!!'` + zzz=`echo "$yyy"|sed 's!^[^=]*=!!'` + yyy=`echo "$yyy"|sed 's!=.*!!'` ;; + *) xxx=`echo "$yyy"|sed 's!:.*!!'` + yyy=`echo "$yyy"|sed 's!^[^:]*:!!'` ;; + esac + ;; + esac + case "$xxx" in + append) + echo "$yyy=\"\${$yyy}$zzz\"" >> posthint.sh ;; + clear) + echo "$yyy=''" >> posthint.sh ;; + define) + case "$zzz" in + '') zzz=define ;; + esac + echo "$yyy='$zzz'" >> posthint.sh ;; + eval) + echo "eval \"$yyy=$zzz\"" >> posthint.sh ;; + prepend) + echo "$yyy=\"$zzz\${$yyy}\"" >> posthint.sh ;; + undef) + case "$zzz" in + '') zzz="$uuu" ;; + esac + echo "$yyy=$zzz" >> posthint.sh ;; + *) echo "$me: unknown -A command '$xxx', ignoring -A $1" >&2 ;; + esac + shift + ;; -f) shift cd .. EOPATCH } if ($major < 8 && $^O eq 'aix') { edit_file('Configure', sub { my $code = shift; # Replicate commit a8c676c69574838b # Whitespace allowed at the ends of /lib/syscalls.exp lines # and half of commit c6912327ae30e6de # AIX syscalls.exp scan: the syscall might be marked 32, 3264, or 64 $code =~ s{(\bsed\b.*\bsyscall)(?:\[0-9\]\*)?(\$.*/lib/syscalls\.exp)} {$1 . "[0-9]*[ \t]*" . $2}e; return $code; }); } if ($major < 8 && !extract_from_file('Configure', qr/^\t\tif test ! -t 0; then$/)) { # Before dfe9444ca7881e71, Configure would refuse to run if stdin was # not a tty. With that commit, the tty requirement was dropped for -de # and -dE # Commit aaeb8e512e8e9e14 dropped the tty requirement for -S # For those older versions, it's probably easiest if we simply remove # the sanity test. edit_file('Configure', sub { my $code = shift; $code =~ s/test ! -t 0/test Perl = rules/; return $code; }); } if ($major == 8 || $major == 9) { # Fix symbol detection to that of commit 373dfab3839ca168 if it's any # intermediate version 5129fff43c4fe08c or later, as the intermediate # versions don't work correctly on (at least) Sparc Linux. # 5129fff43c4fe08c adds the first mention of mistrustnm. # 373dfab3839ca168 removes the last mention of lc="" edit_file('Configure', sub { my $code = shift; return $code if $code !~ /\btc="";/; # 373dfab3839ca168 or later return $code if $code !~ /\bmistrustnm\b/; # before 5129fff43c4fe08c my $fixed = <<'EOC'; : is a C symbol defined? csym='tlook=$1; case "$3" in -v) tf=libc.tmp; tdc="";; -a) tf=libc.tmp; tdc="[]";; *) tlook="^$1\$"; tf=libc.list; tdc="()";; esac; tx=yes; case "$reuseval-$4" in true-) ;; true-*) tx=no; eval "tval=\$$4"; case "$tval" in "") tx=yes;; esac;; esac; case "$tx" in yes) tval=false; if $test "$runnm" = true; then if $contains $tlook $tf >/dev/null 2>&1; then tval=true; elif $test "$mistrustnm" = compile -o "$mistrustnm" = run; then echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c; $cc -o try $optimize $ccflags $ldflags try.c >/dev/null 2>&1 $libs && tval=true; $test "$mistrustnm" = run -a -x try && { $run ./try$_exe >/dev/null 2>&1 || tval=false; }; $rm -f try$_exe try.c core core.* try.core; fi; else echo "void *(*(p()))$tdc { extern void *$1$tdc; return &$1; } int main() { if(p()) return(0); else return(1); }"> try.c; $cc -o try $optimize $ccflags $ldflags try.c $libs >/dev/null 2>&1 && tval=true; $rm -f try$_exe try.c; fi; ;; *) case "$tval" in $define) tval=true;; *) tval=false;; esac; ;; esac; eval "$2=$tval"' EOC $code =~ s/\n: is a C symbol defined\?\n.*?\neval "\$2=\$tval"'\n\n/$fixed/sm or die_255("substitution failed"); return $code; }); } if ($major < 10 && extract_from_file('Configure', qr/^set malloc\.h i_malloc$/)) { # This is commit 01d07975f7ef0e7d, trimmed, with $compile inlined as # prior to bd9b35c97ad661cc Configure had the malloc.h test before the # definition of $compile. apply_patch(<<'EOPATCH'); diff --git a/Configure b/Configure index 3d2e8b9..6ce7766 100755 --- a/Configure +++ b/Configure @@ -6743,5 +6743,22 @@ set d_dosuid : see if this is a malloc.h system -set malloc.h i_malloc -eval $inhdr +: we want a real compile instead of Inhdr because some systems have a +: malloc.h that just gives a compile error saying to use stdlib.h instead +echo " " +$cat >try.c < +#include +int main () { return 0; } +EOCP +set try +if $cc $optimize $ccflags $ldflags -o try $* try.c $libs > /dev/null 2>&1; then + echo " found." >&4 + val="$define" +else + echo " NOT found." >&4 + val="$undef" +fi +$rm -f try.c try +set i_malloc +eval $setvar EOPATCH } } sub patch_hints { if ($^O eq 'freebsd') { # There are rather too many version-specific FreeBSD hints fixes to # patch individually. Also, more than once the FreeBSD hints file has # been written in what turned out to be a rather non-future-proof style, # with case statements treating the most recent version as the # exception, instead of treating previous versions' behaviour explicitly # and changing the default to cater for the current behaviour. (As # strangely, future versions inherit the current behaviour.) checkout_file('hints/freebsd.sh'); } elsif ($^O eq 'darwin') { if ($major < 8) { # We can't build on darwin without some of the data in the hints # file. Probably less surprising to use the earliest version of # hints/darwin.sh and then edit in place just below, than use # blead's version, as that would create a discontinuity at # f556e5b971932902 - before it, hints bugs would be "fixed", after # it they'd resurface. This way, we should give the illusion of # monotonic bug fixing. my $faking_it; if (!-f 'hints/darwin.sh') { checkout_file('hints/darwin.sh', 'f556e5b971932902'); ++$faking_it; } edit_file('hints/darwin.sh', sub { my $code = shift; # Part of commit 8f4f83badb7d1ba9, which mostly undoes # commit 0511a818910f476c. $code =~ s/^cppflags='-traditional-cpp';$/cppflags="\${cppflags} -no-cpp-precomp"/m; # commit 14c11978e9b52e08/803bb6cc74d36a3f # Without this, code in libperl.bundle links against op.o # in preference to opmini.o on the linker command line, # and hence miniperl tries to use File::Glob instead of # csh $code =~ s/^(lddlflags=)/ldflags="\${ldflags} -flat_namespace"\n$1/m; # f556e5b971932902 also patches Makefile.SH with some # special case code to deal with useshrplib for darwin. # Given that post 5.8.0 the darwin hints default was # changed to false, and it would be very complex to splice # in that code in various versions of Makefile.SH back # to 5.002, lets just turn it off. $code =~ s/^useshrplib='true'/useshrplib='false'/m if $faking_it; # Part of commit d235852b65d51c44 # Don't do this on a case sensitive HFS+ partition, as it # breaks the build for 5.003 and earlier. if ($case_insensitive && $code !~ /^firstmakefile=GNUmakefile/) { $code .= "\nfirstmakefile=GNUmakefile;\n"; } return $code; }); } } elsif ($^O eq 'netbsd') { if ($major < 6) { # These are part of commit 099685bc64c7dbce edit_file('hints/netbsd.sh', sub { my $code = shift; my $fixed = <<'EOC'; case "$osvers" in 0.9|0.8*) usedl="$undef" ;; *) if [ -f /usr/libexec/ld.elf_so ]; then d_dlopen=$define d_dlerror=$define ccdlflags="-Wl,-E -Wl,-R${PREFIX}/lib $ccdlflags" cccdlflags="-DPIC -fPIC $cccdlflags" lddlflags="--whole-archive -shared $lddlflags" elif [ "`uname -m`" = "pmax" ]; then # NetBSD 1.3 and 1.3.1 on pmax shipped an 'old' ld.so, which will not work. d_dlopen=$undef elif [ -f /usr/libexec/ld.so ]; then d_dlopen=$define d_dlerror=$define ccdlflags="-Wl,-R${PREFIX}/lib $ccdlflags" # we use -fPIC here because -fpic is *NOT* enough for some of the # extensions like Tk on some netbsd platforms (the sparc is one) cccdlflags="-DPIC -fPIC $cccdlflags" lddlflags="-Bforcearchive -Bshareable $lddlflags" else d_dlopen=$undef fi ;; esac EOC $code =~ s/^case "\$osvers" in\n0\.9\|0\.8.*?^esac\n/$fixed/ms; return $code; }); } } elsif ($^O eq 'openbsd') { if ($major < 8) { checkout_file('hints/openbsd.sh', '43051805d53a3e4c') unless -f 'hints/openbsd.sh'; my $which = extract_from_file('hints/openbsd.sh', qr/# from (2\.8|3\.1) onwards/, ''); if ($which eq '') { my $was = extract_from_file('hints/openbsd.sh', qr/(lddlflags="(?:-Bforcearchive )?-Bshareable)/); # This is commit 154d43cbcf57271c and parts of 5c75dbfa77b0949c # and 29b5585702e5e025 apply_patch(sprintf <<'EOPATCH', $was); diff --git a/hints/openbsd.sh b/hints/openbsd.sh index a7d8bf2..5b79709 100644 --- a/hints/openbsd.sh +++ b/hints/openbsd.sh @@ -37,7 +37,25 @@ OpenBSD.alpha|OpenBSD.mips|OpenBSD.powerpc|OpenBSD.vax) # we use -fPIC here because -fpic is *NOT* enough for some of the # extensions like Tk on some OpenBSD platforms (ie: sparc) cccdlflags="-DPIC -fPIC $cccdlflags" - %s $lddlflags" + case "$osvers" in + [01].*|2.[0-7]|2.[0-7].*) + lddlflags="-Bshareable $lddlflags" + ;; + 2.[8-9]|3.0) + ld=${cc:-cc} + lddlflags="-shared -fPIC $lddlflags" + ;; + *) # from 3.1 onwards + ld=${cc:-cc} + lddlflags="-shared -fPIC $lddlflags" + libswanted=`echo $libswanted | sed 's/ dl / /'` + ;; + esac + + # We need to force ld to export symbols on ELF platforms. + # Without this, dlopen() is crippled. + ELF=`${cc:-cc} -dM -E - >'); print $fh <<'EOT' or die_255($!); case "`uname -m`" in sparc*) case "$cccdlflags" in *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;; *) cccdlflags="$cccdlflags -fPIC" ;; esac ;; esac EOT close_or_die($fh); } } } } elsif ($^O eq 'solaris') { if (($major == 13 || $major == 14) && extract_from_file('hints/solaris_2.sh', qr/getconfldllflags/)) { apply_commit('c80bde4388070c45'); } } } sub patch_SH { # Cwd.xs added in commit 0d2079faa739aaa9. Cwd.pm moved to ext/ 8 years # later in commit 403f501d5b37ebf0 if ($major > 0 && <*/Cwd/Cwd.xs>) { if ($major < 10 && !extract_from_file('Makefile.SH', qr/^extra_dep=''$/)) { # The Makefile.PL for Unicode::Normalize needs # lib/unicore/CombiningClass.pl. Even without a parallel build, we # need a dependency to ensure that it builds. This is a variant of # commit 9f3ef600c170f61e. Putting this for earlier versions gives # us a spot on which to hang the edits below apply_patch(<<'EOPATCH'); diff --git a/Makefile.SH b/Makefile.SH index f61d0db..6097954 100644 --- a/Makefile.SH +++ b/Makefile.SH @@ -155,10 +155,20 @@ esac : Prepare dependency lists for Makefile. dynamic_list=' ' +extra_dep='' for f in $dynamic_ext; do : the dependency named here will never exist base=`echo "$f" | sed 's/.*\///'` - dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext" + this_target="lib/auto/$f/$base.$dlext" + dynamic_list="$dynamic_list $this_target" + + : Parallel makes reveal that we have some interdependencies + case $f in + Math/BigInt/FastCalc) extra_dep="$extra_dep +$this_target: lib/auto/List/Util/Util.$dlext" ;; + Unicode/Normalize) extra_dep="$extra_dep +$this_target: lib/unicore/CombiningClass.pl" ;; + esac done static_list=' ' @@ -987,2 +997,9 @@ n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE @$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) +!NO!SUBS! + +$spitshell >>Makefile <>Makefile <<'!NO!SUBS!' EOPATCH } if ($major == 15 && $^O !~ /^(linux|darwin|.*bsd)$/ && extract_from_file('Makefile.SH', qr/^V.* \?= /)) { # Remove the GNU-make-ism (which the BSD makes also support, but # most other makes choke on) apply_patch(<<'EOPATCH'); diff --git a/Makefile.SH b/Makefile.SH index 94952bd..13e9001 100755 --- a/Makefile.SH +++ b/Makefile.SH @@ -338,8 +338,8 @@ linux*|darwin) $spitshell >>$Makefile </dev/null +VALGRIND = valgrind +VG_TEST = ./perl -e 1 2>/dev/null !GROK!THIS! ;; EOPATCH } if ($major == 11) { if (extract_from_file('patchlevel.h', qr/^#include "unpushed\.h"/)) { # I had thought it easier to detect when building one of the 52 # commits with the original method of incorporating the git # revision and drop parallel make flags. Commits shown by # git log 46807d8e809cc127^..dcff826f70bf3f64^ ^d4fb0a1f15d1a1c4 # However, it's not actually possible to make miniperl for that # configuration as-is, because the file .patchnum is only made # as a side effect of target 'all' # I also don't think that it's "safe" to simply run # make_patchnum.sh before the build. We need the proper # dependency rules in the Makefile to *stop* it being run again # at the wrong time. # This range is important because contains the commit that # merges Schwern's y2038 work. apply_patch(<<'EOPATCH'); diff --git a/Makefile.SH b/Makefile.SH index 9ad8b6f..106e721 100644 --- a/Makefile.SH +++ b/Makefile.SH @@ -540,9 +544,14 @@ sperl.i: perl.c $(h) .PHONY: all translators utilities make_patchnum -make_patchnum: +make_patchnum: lib/Config_git.pl + +lib/Config_git.pl: make_patchnum.sh sh $(shellflags) make_patchnum.sh +# .patchnum, unpushed.h and lib/Config_git.pl are built by make_patchnum.sh +unpushed.h .patchnum: lib/Config_git.pl + # make sure that we recompile perl.c if .patchnum changes perl$(OBJ_EXT): .patchnum unpushed.h EOPATCH } elsif (-f '.gitignore' && extract_from_file('.gitignore', qr/^\.patchnum$/)) { # 8565263ab8a47cda to 46807d8e809cc127^ inclusive. edit_file('Makefile.SH', sub { my $code = shift; $code =~ s/^make_patchnum:\n/make_patchnum: .patchnum .sha1: .patchnum .patchnum: make_patchnum.sh /m; return $code; }); } elsif (-f 'lib/.gitignore' && extract_from_file('lib/.gitignore', qr!^/Config_git.pl!) && !extract_from_file('Makefile.SH', qr/^uudmap\.h.*:bitcount.h$/)) { # Between commits and dcff826f70bf3f64 and 0f13ebd5d71f8177^ edit_file('Makefile.SH', sub { my $code = shift; # Bug introduced by 344af494c35a9f0f # fixed in 0f13ebd5d71f8177 $code =~ s{^(pod/perlapi\.pod) (pod/perlintern\.pod): } {$1: $2\n\n$2: }m; # Bug introduced by efa50c51e3301a2c # fixed in 0f13ebd5d71f8177 $code =~ s{^(uudmap\.h) (bitcount\.h): } {$1: $2\n\n$2: }m; # The rats nest of getting git_version.h correct if ($code =~ s{git_version\.h: stock_git_version\.h \tcp stock_git_version\.h git_version\.h} {}m) { # before 486cd780047ff224 # We probably can't build between # 953f6acfa20ec275^ and 8565263ab8a47cda # inclusive, but all commits in that range # relate to getting make_patchnum.sh working, # so it is extremely unlikely to be an # interesting bisect target. They will skip. # No, don't spawn a submake if # make_patchnum.sh or make_patchnum.pl fails $code =~ s{\|\| \$\(MAKE\) miniperl.*} {}m; $code =~ s{^\t(sh.*make_patchnum\.sh.*)} {\t-$1}m; # Use an external perl to run make_patchnum.pl # because miniperl still depends on # git_version.h $code =~ s{^\t.*make_patchnum\.pl} {\t-$^X make_patchnum.pl}m; # "Truth in advertising" - running # make_patchnum generates 2 files. $code =~ s{^make_patchnum:.*}{ make_patchnum: lib/Config_git.pl git_version.h: lib/Config_git.pl perlmini\$(OBJ_EXT): git_version.h lib/Config_git.pl:}m; } # Right, now we've corrected Makefile.SH to # correctly describe how lib/Config_git.pl and # git_version.h are made, we need to fix the rest # This emulates commit 2b63e250843b907e # This might duplicate the rule stating that # git_version.h depends on lib/Config_git.pl # This is harmless. $code =~ s{^(?:lib/Config_git\.pl )?git_version\.h: (.* make_patchnum\.pl.*)} {git_version.h: lib/Config_git.pl lib/Config_git.pl: $1}m; # This emulates commits 0f13ebd5d71f8177 and # and a04d4598adc57886. It ensures that # lib/Config_git.pl is built before configpm, # and that configpm is run exactly once. $code =~ s{^(\$\(.*?\) )?(\$\(CONFIGPOD\))(: .*? configpm Porting/Glossary)( lib/Config_git\.pl)?}{ # If present, other files depend on $(CONFIGPOD) ($1 ? "$1: $2\n\n" : '') # Then the rule we found . $2 . $3 # Add dependency if not there . ($4 ? $4 : ' lib/Config_git.pl') }me; return $code; }); } } if ($major < 14) { # Commits dc0655f797469c47 and d11a62fe01f2ecb2 edit_file('Makefile.SH', sub { my $code = shift; foreach my $ext (qw(Encode SDBM_File)) { next if $code =~ /\b$ext\) extra_dep=/s; $code =~ s!(\) extra_dep="\$extra_dep \$this_target: .*?" ;;) ( esac )!$1 $ext) extra_dep="\$extra_dep \$this_target: lib/auto/Cwd/Cwd.\$dlext" ;; $2!; } return $code; }); } } if ($major == 7) { # Remove commits 9fec149bb652b6e9 and 5bab1179608f81d8, which add/amend # rules to automatically run regen scripts that rebuild C headers. These # cause problems because a git checkout doesn't preserve relative file # modification times, hence the regen scripts may fire. This will # obscure whether the repository had the correct generated headers # checked in. # Also, the dependency rules for running the scripts were not correct, # which could cause spurious re-builds on re-running make, and can cause # complete build failures for a parallel make. if (extract_from_file('Makefile.SH', qr/Writing it this way gives make a big hint to always run opcode\.pl before/)) { apply_commit('70c6e6715e8fec53'); } elsif (extract_from_file('Makefile.SH', qr/^opcode\.h opnames\.h pp_proto\.h pp\.sym: opcode\.pl$/)) { revert_commit('9fec149bb652b6e9'); } } if ($^O eq 'aix' && $major >= 11 && $major <= 15 && extract_from_file('makedef.pl', qr/^use Config/)) { edit_file('Makefile.SH', sub { # The AIX part of commit e6807d8ab22b761c # It's safe to substitute lib/Config.pm for config.sh # as lib/Config.pm depends on config.sh # If the tree is post e6807d8ab22b761c, the substitution # won't match, which is harmless. my $code = shift; $code =~ s{^(perl\.exp:.* )config\.sh(\b.*)} {$1 . '$(CONFIGPM)' . $2}me; return $code; }); } # There was a bug in makedepend.SH which was fixed in version 96a8704c. # Symptom was './makedepend: 1: Syntax error: Unterminated quoted string' # Remove this if you're actually bisecting a problem related to # makedepend.SH # If you do this, you may need to add in code to correct the output of older # makedepends, which don't correctly filter newer gcc output such as # checkout_file('makedepend.SH'); if ($major < 4 && -f 'config.sh' && !extract_from_file('config.sh', qr/^trnl=/)) { # This seems to be necessary to avoid makedepend becoming confused, # and hanging on stdin. Seems that the code after # make shlist || ...here... is never run. edit_file('makedepend.SH', sub { my $code = shift; $code =~ s/^trnl='\$trnl'$/trnl='\\n'/m; return $code; }); } } sub patch_C { # This is ordered by $major, as it's likely that different platforms may # well want to share code. if ($major == 2 && extract_from_file('perl.c', qr/^\tfclose\(e_fp\);$/)) { # need to patch perl.c to avoid calling fclose() twice on e_fp when # using -e # This diff is part of commit ab821d7fdc14a438. The second close was # introduced with perl-5.002, commit a5f75d667838e8e7 # Might want a6c477ed8d4864e6 too, for the corresponding change to # pp_ctl.c (likely without this, eval will have "fun") apply_patch(<<'EOPATCH'); diff --git a/perl.c b/perl.c index 03c4d48..3c814a2 100644 --- a/perl.c +++ b/perl.c @@ -252,6 +252,7 @@ setuid perl scripts securely.\n"); #ifndef VMS /* VMS doesn't have environ array */ origenviron = environ; #endif + e_tmpname = Nullch; if (do_undump) { @@ -405,6 +406,7 @@ setuid perl scripts securely.\n"); if (e_fp) { if (Fflush(e_fp) || ferror(e_fp) || fclose(e_fp)) croak("Can't write to temp file for -e: %s", Strerror(errno)); + e_fp = Nullfp; argc++,argv--; scriptname = e_tmpname; } @@ -470,10 +472,10 @@ setuid perl scripts securely.\n"); curcop->cop_line = 0; curstash = defstash; preprocess = FALSE; - if (e_fp) { - fclose(e_fp); - e_fp = Nullfp; + if (e_tmpname) { (void)UNLINK(e_tmpname); + Safefree(e_tmpname); + e_tmpname = Nullch; } /* now that script is parsed, we can modify record separator */ @@ -1369,7 +1371,7 @@ SV *sv; scriptname = xfound; } - origfilename = savepv(e_fp ? "-e" : scriptname); + origfilename = savepv(e_tmpname ? "-e" : scriptname); curcop->cop_filegv = gv_fetchfile(origfilename); if (strEQ(origfilename,"-")) scriptname = ""; EOPATCH } if ($major < 3 && $^O eq 'openbsd' && !extract_from_file('pp_sys.c', qr/BSD_GETPGRP/)) { # Part of commit c3293030fd1b7489 apply_patch(<<'EOPATCH'); diff --git a/pp_sys.c b/pp_sys.c index 4608a2a..f0c9d1d 100644 --- a/pp_sys.c +++ b/pp_sys.c @@ -2903,8 +2903,8 @@ PP(pp_getpgrp) pid = 0; else pid = SvIVx(POPs); -#ifdef USE_BSDPGRP - value = (I32)getpgrp(pid); +#ifdef BSD_GETPGRP + value = (I32)BSD_GETPGRP(pid); #else if (pid != 0) DIE("POSIX getpgrp can't take an argument"); @@ -2933,8 +2933,8 @@ PP(pp_setpgrp) } TAINT_PROPER("setpgrp"); -#ifdef USE_BSDPGRP - SETi( setpgrp(pid, pgrp) >= 0 ); +#ifdef BSD_SETPGRP + SETi( BSD_SETPGRP(pid, pgrp) >= 0 ); #else if ((pgrp != 0) || (pid != 0)) { DIE("POSIX setpgrp can't take an argument"); EOPATCH } if ($major < 4 && $^O eq 'openbsd') { my $bad; # Need changes from commit a6e633defa583ad5. # Commits c07a80fdfe3926b5 and f82b3d4130164d5f changed the same part # of perl.h if (extract_from_file('perl.h', qr/^#ifdef HAS_GETPGRP2$/)) { $bad = <<'EOBAD'; *************** *** 57,71 **** #define TAINT_PROPER(s) if (tainting) taint_proper(no_security, s) #define TAINT_ENV() if (tainting) taint_env() ! #ifdef HAS_GETPGRP2 ! # ifndef HAS_GETPGRP ! # define HAS_GETPGRP ! # endif ! #endif ! ! #ifdef HAS_SETPGRP2 ! # ifndef HAS_SETPGRP ! # define HAS_SETPGRP ! # endif #endif EOBAD } elsif (extract_from_file('perl.h', qr/Gack, you have one but not both of getpgrp2/)) { $bad = <<'EOBAD'; *************** *** 56,76 **** #define TAINT_PROPER(s) if (tainting) taint_proper(no_security, s) #define TAINT_ENV() if (tainting) taint_env() ! #if defined(HAS_GETPGRP2) && defined(HAS_SETPGRP2) ! # define getpgrp getpgrp2 ! # define setpgrp setpgrp2 ! # ifndef HAS_GETPGRP ! # define HAS_GETPGRP ! # endif ! # ifndef HAS_SETPGRP ! # define HAS_SETPGRP ! # endif ! # ifndef USE_BSDPGRP ! # define USE_BSDPGRP ! # endif ! #else ! # if defined(HAS_GETPGRP2) || defined(HAS_SETPGRP2) ! #include "Gack, you have one but not both of getpgrp2() and setpgrp2()." ! # endif #endif EOBAD } elsif (extract_from_file('perl.h', qr/^#ifdef USE_BSDPGRP$/)) { $bad = <<'EOBAD' *************** *** 91,116 **** #define TAINT_PROPER(s) if (tainting) taint_proper(no_security, s) #define TAINT_ENV() if (tainting) taint_env() ! #ifdef USE_BSDPGRP ! # ifdef HAS_GETPGRP ! # define BSD_GETPGRP(pid) getpgrp((pid)) ! # endif ! # ifdef HAS_SETPGRP ! # define BSD_SETPGRP(pid, pgrp) setpgrp((pid), (pgrp)) ! # endif ! #else ! # ifdef HAS_GETPGRP2 ! # define BSD_GETPGRP(pid) getpgrp2((pid)) ! # ifndef HAS_GETPGRP ! # define HAS_GETPGRP ! # endif ! # endif ! # ifdef HAS_SETPGRP2 ! # define BSD_SETPGRP(pid, pgrp) setpgrp2((pid), (pgrp)) ! # ifndef HAS_SETPGRP ! # define HAS_SETPGRP ! # endif ! # endif #endif #ifndef _TYPES_ /* If types.h defines this it's easy. */ EOBAD } if ($bad) { apply_patch(<<"EOPATCH"); *** a/perl.h 2011-10-21 09:46:12.000000000 +0200 --- b/perl.h 2011-10-21 09:46:12.000000000 +0200 $bad--- 91,144 ---- #define TAINT_PROPER(s) if (tainting) taint_proper(no_security, s) #define TAINT_ENV() if (tainting) taint_env() ! /* XXX All process group stuff is handled in pp_sys.c. Should these ! defines move there? If so, I could simplify this a lot. --AD 9/96. ! */ ! /* Process group stuff changed from traditional BSD to POSIX. ! perlfunc.pod documents the traditional BSD-style syntax, so we'll ! try to preserve that, if possible. ! */ ! #ifdef HAS_SETPGID ! # define BSD_SETPGRP(pid, pgrp) setpgid((pid), (pgrp)) ! #else ! # if defined(HAS_SETPGRP) && defined(USE_BSD_SETPGRP) ! # define BSD_SETPGRP(pid, pgrp) setpgrp((pid), (pgrp)) ! # else ! # ifdef HAS_SETPGRP2 /* DG/UX */ ! # define BSD_SETPGRP(pid, pgrp) setpgrp2((pid), (pgrp)) ! # endif ! # endif ! #endif ! #if defined(BSD_SETPGRP) && !defined(HAS_SETPGRP) ! # define HAS_SETPGRP /* Well, effectively it does . . . */ ! #endif ! ! /* getpgid isn't POSIX, but at least Solaris and Linux have it, and it makes ! our life easier :-) so we'll try it. ! */ ! #ifdef HAS_GETPGID ! # define BSD_GETPGRP(pid) getpgid((pid)) ! #else ! # if defined(HAS_GETPGRP) && defined(USE_BSD_GETPGRP) ! # define BSD_GETPGRP(pid) getpgrp((pid)) ! # else ! # ifdef HAS_GETPGRP2 /* DG/UX */ ! # define BSD_GETPGRP(pid) getpgrp2((pid)) ! # endif ! # endif ! #endif ! #if defined(BSD_GETPGRP) && !defined(HAS_GETPGRP) ! # define HAS_GETPGRP /* Well, effectively it does . . . */ ! #endif ! ! /* These are not exact synonyms, since setpgrp() and getpgrp() may ! have different behaviors, but perl.h used to define USE_BSDPGRP ! (prior to 5.003_05) so some extension might depend on it. ! */ ! #if defined(USE_BSD_SETPGRP) || defined(USE_BSD_GETPGRP) ! # ifndef USE_BSDPGRP ! # define USE_BSDPGRP ! # endif #endif #ifndef _TYPES_ /* If types.h defines this it's easy. */ EOPATCH } } if ($major < 4 && $^O eq 'hpux' && extract_from_file('sv.c', qr/i = _filbuf\(/)) { apply_patch(<<'EOPATCH'); diff --git a/sv.c b/sv.c index a1f1d60..0a806f1 100644 --- a/sv.c +++ b/sv.c @@ -2641,7 +2641,7 @@ I32 append; FILE_cnt(fp) = cnt; /* deregisterize cnt and ptr */ FILE_ptr(fp) = ptr; - i = _filbuf(fp); /* get more characters */ + i = __filbuf(fp); /* get more characters */ cnt = FILE_cnt(fp); ptr = FILE_ptr(fp); /* reregisterize cnt and ptr */ EOPATCH } if ($major == 4 && extract_from_file('scope.c', qr/\(SV\*\)SSPOPINT/)) { # [PATCH] 5.004_04 +MAINT_TRIAL_1 broken when sizeof(int) != sizeof(void) # Fixes a bug introduced in 161b7d1635bc830b apply_commit('9002cb76ec83ef7f'); } if ($major == 4 && extract_from_file('av.c', qr/AvARRAY\(av\) = 0;/)) { # Fixes a bug introduced in 1393e20655efb4bc apply_commit('e1c148c28bf3335b', 'av.c'); } if ($major == 4) { my $rest = extract_from_file('perl.c', qr/delimcpy(.*)/); if (defined $rest and $rest !~ /,$/) { # delimcpy added in fc36a67e8855d031, perl.c refactored to use it. # bug introduced in 2a92aaa05aa1acbf, fixed in 8490252049bf42d3 # code then moved to util.c in commit 491527d0220de34e apply_patch(<<'EOPATCH'); diff --git a/perl.c b/perl.c index 4eb69e3..54bbb00 100644 --- a/perl.c +++ b/perl.c @@ -1735,7 +1735,7 @@ SV *sv; if (len < sizeof tokenbuf) tokenbuf[len] = '\0'; #else /* ! (atarist || DOSISH) */ - s = delimcpy(tokenbuf, tokenbuf + sizeof tokenbuf, s, bufend + s = delimcpy(tokenbuf, tokenbuf + sizeof tokenbuf, s, bufend, ':', &len); #endif /* ! (atarist || DOSISH) */ EOPATCH } } if ($major == 4 && $^O eq 'linux') { # Whilst this is fixed properly in f0784f6a4c3e45e1 which provides the # Configure probe, it's easier to back out the problematic changes made # in these previous commits. # In maint-5.004, the simplest addition is to "correct" the file to # use the same pre-processor macros as blead had used. Whilst commit # 9b599b2a63d2324d (reverted below) is described as # [win32] merge change#887 from maintbranch # it uses __sun__ and __svr4__ instead of the __sun and __SVR4 of the # maint branch commit 6cdf74fe31f049dc edit_file('doio.c', sub { my $code = shift; $code =~ s{defined\(__sun\) && defined\(__SVR4\)} {defined(__sun__) && defined(__svr4__)}g; return $code; }); if (extract_from_file('doio.c', qr!^/\* XXX REALLY need metaconfig test \*/$!)) { revert_commit('4682965a1447ea44', 'doio.c'); } if (my $token = extract_from_file('doio.c', qr!^#if (defined\(__sun(?:__)?\)) && defined\(__svr4__\) /\* XXX Need metaconfig test \*/$!)) { my $patch = `git show -R 9b599b2a63d2324d doio.c`; $patch =~ s/defined\(__sun__\)/$token/g; apply_patch($patch); } if (extract_from_file('doio.c', qr!^/\* linux \(and Solaris2\?\) uses :$!)) { revert_commit('8490252049bf42d3', 'doio.c'); } if (extract_from_file('doio.c', qr/^ unsemds.buf = &semds;$/)) { revert_commit('8e591e46b4c6543e'); } if (extract_from_file('doio.c', qr!^#ifdef __linux__ /\* XXX Need metaconfig test \*/$!)) { # Reverts part of commit 3e3baf6d63945cb6 apply_patch(<<'EOPATCH'); diff --git b/doio.c a/doio.c index 62b7de9..0d57425 100644 --- b/doio.c +++ a/doio.c @@ -1333,9 +1331,6 @@ SV **sp; char *a; I32 id, n, cmd, infosize, getinfo; I32 ret = -1; -#ifdef __linux__ /* XXX Need metaconfig test */ - union semun unsemds; -#endif id = SvIVx(*++mark); n = (optype == OP_SEMCTL) ? SvIVx(*++mark) : 0; @@ -1364,29 +1359,11 @@ SV **sp; infosize = sizeof(struct semid_ds); else if (cmd == GETALL || cmd == SETALL) { -#ifdef __linux__ /* XXX Need metaconfig test */ -/* linux uses : - int semctl (int semid, int semnun, int cmd, union semun arg) - - union semun { - int val; - struct semid_ds *buf; - ushort *array; - }; -*/ - union semun semds; - if (semctl(id, 0, IPC_STAT, semds) == -1) -#else struct semid_ds semds; if (semctl(id, 0, IPC_STAT, &semds) == -1) -#endif return -1; getinfo = (cmd == GETALL); -#ifdef __linux__ /* XXX Need metaconfig test */ - infosize = semds.buf->sem_nsems * sizeof(short); -#else infosize = semds.sem_nsems * sizeof(short); -#endif /* "short" is technically wrong but much more portable than guessing about u_?short(_t)? */ } @@ -1429,12 +1406,7 @@ SV **sp; #endif #ifdef HAS_SEM case OP_SEMCTL: -#ifdef __linux__ /* XXX Need metaconfig test */ - unsemds.buf = (struct semid_ds *)a; - ret = semctl(id, n, cmd, unsemds); -#else ret = semctl(id, n, cmd, (struct semid_ds *)a); -#endif break; #endif #ifdef HAS_SHM EOPATCH } # Incorrect prototype added as part of 8ac853655d9b7447, fixed as part # of commit dc45a647708b6c54, with at least one intermediate # modification. Correct prototype for gethostbyaddr has socklen_t # second. Linux has uint32_t first for getnetbyaddr. # Easiest just to remove, instead of attempting more complex patching. # Something similar may be needed on other platforms. edit_file('pp_sys.c', sub { my $code = shift; $code =~ s/^ struct hostent \*(?:PerlSock_)?gethostbyaddr\([^)]+\);$//m; $code =~ s/^ struct netent \*getnetbyaddr\([^)]+\);$//m; return $code; }); } if ($major < 5 && $^O eq 'aix' && !extract_from_file('pp_sys.c', qr/defined\(HOST_NOT_FOUND\) && !defined\(h_errno\)/)) { # part of commit dc45a647708b6c54 # Andy Dougherty's configuration patches (Config_63-01 up to 04). apply_patch(<<'EOPATCH') diff --git a/pp_sys.c b/pp_sys.c index c2fcb6f..efa39fb 100644 --- a/pp_sys.c +++ b/pp_sys.c @@ -54,7 +54,7 @@ extern "C" int syscall(unsigned long,...); #endif #endif -#ifdef HOST_NOT_FOUND +#if defined(HOST_NOT_FOUND) && !defined(h_errno) extern int h_errno; #endif EOPATCH } if ($major == 5 && `git rev-parse HEAD` eq "22c35a8c2392967a5ba6b5370695be464bd7012c\n") { # Commit 22c35a8c2392967a is significant, # "phase 1 of somewhat major rearrangement of PERL_OBJECT stuff" # but doesn't build due to 2 simple errors. blead in this broken state # was merged to the cfgperl branch, and then these were immediately # corrected there. cfgperl (with the fixes) was merged back to blead. # The resultant rather twisty maze of commits looks like this: =begin comment * | | commit 137225782c183172f360c827424b9b9f8adbef0e |\ \ \ Merge: 22c35a8 2a8ee23 | |/ / Author: Gurusamy Sarathy | | | Date: Fri Oct 30 17:38:36 1998 +0000 | | | | | | integrate cfgperl tweaks into mainline | | | | | | p4raw-id: //depot/perl@2144 | | | | * | commit 2a8ee23279873759693fa83eca279355db2b665c | | | Author: Jarkko Hietaniemi | | | Date: Fri Oct 30 13:27:39 1998 +0000 | | | | | | There can be multiple yacc/bison errors. | | | | | | p4raw-id: //depot/cfgperl@2143 | | | | * | commit 93fb2ac393172fc3e2c14edb20b718309198abbc | | | Author: Jarkko Hietaniemi | | | Date: Fri Oct 30 13:18:43 1998 +0000 | | | | | | README.posix-bc update. | | | | | | p4raw-id: //depot/cfgperl@2142 | | | | * | commit 4ec43091e8e6657cb260b5e563df30aaa154effe | | | Author: Jarkko Hietaniemi | | | Date: Fri Oct 30 09:12:59 1998 +0000 | | | | | | #2133 fallout. | | | | | | p4raw-id: //depot/cfgperl@2141 | | | | * | commit 134ca994cfefe0f613d43505a885e4fc2100b05c | |\ \ Merge: 7093112 22c35a8 | |/ / Author: Jarkko Hietaniemi |/| | Date: Fri Oct 30 08:43:18 1998 +0000 | | | | | | Integrate from mainperl. | | | | | | p4raw-id: //depot/cfgperl@2140 | | | * | | commit 22c35a8c2392967a5ba6b5370695be464bd7012c | | | Author: Gurusamy Sarathy | | | Date: Fri Oct 30 02:51:39 1998 +0000 | | | | | | phase 1 of somewhat major rearrangement of PERL_OBJECT stuff | | | (objpp.h is gone, embed.pl now does some of that); objXSUB.h | | | should soon be automated also; the global variables that | | | escaped the PL_foo conversion are now reined in; renamed | | | MAGIC in regcomp.h to REG_MAGIC to avoid collision with the | | | type of same name; duplicated lists of pp_things in various | | | places is now gone; result has only been tested on win32 | | | | | | p4raw-id: //depot/perl@2133 =end comment =cut # and completely confuses git bisect (and at least me), causing it to # the bisect run to confidently return the wrong answer, an unrelated # commit on the cfgperl branch. apply_commit('4ec43091e8e6657c'); } if ($major == 5 && extract_from_file('pp_sys.c', qr/PERL_EFF_ACCESS_R_OK/) && !extract_from_file('pp_sys.c', qr/XXX Configure test needed for eaccess/)) { # Between 5ff3f7a4e03a6b10 and c955f1177b2e311d^ # This is the meat of commit c955f1177b2e311d (without the other # indenting changes that would cause a conflict). # Without this 538 revisions won't build on (at least) Linux apply_patch(<<'EOPATCH'); diff --git a/pp_sys.c b/pp_sys.c index d60c8dc..867dee4 100644 --- a/pp_sys.c +++ b/pp_sys.c @@ -198,9 +198,18 @@ static char zero_but_true[ZBTLEN + 1] = "0 but true"; # if defined(I_SYS_SECURITY) # include # endif -# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK, ACC_SELF)) -# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK, ACC_SELF)) -# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK, ACC_SELF)) + /* XXX Configure test needed for eaccess */ +# ifdef ACC_SELF + /* HP SecureWare */ +# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK, ACC_SELF)) +# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK, ACC_SELF)) +# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK, ACC_SELF)) +# else + /* SCO */ +# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK)) +# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK)) +# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK)) +# endif #endif #if !defined(PERL_EFF_ACCESS_R_OK) && defined(HAS_ACCESSX) && defined(ACC_SELF) EOPATCH } if ($major == 5 && extract_from_file('mg.c', qr/If we're still on top of the stack, pop us off/) && !extract_from_file('mg.c', qr/PL_savestack_ix -= popval/)) { # Fix up commit 455ece5e082708b1: # SSNEW() API for allocating memory on the savestack # Message-Id: # Subject: [PATCH 5.005_51] (was: why SAVEDESTRUCTOR()...) apply_commit('3c8a44569607336e', 'mg.c'); } if ($major == 5) { if (extract_from_file('doop.c', qr/croak\(no_modify\);/) && extract_from_file('doop.c', qr/croak\(PL_no_modify\);/)) { # Whilst the log suggests that this would only fix 5 commits, in # practice this area of history is a complete tarpit, and git bisect # gets very confused by the skips in the middle of the back and # forth merging between //depot/perl and //depot/cfgperl apply_commit('6393042b638dafd3'); } # One error "fixed" with another: if (extract_from_file('pp_ctl.c', qr/\Qstatic void *docatch_body _((void *o));\E/)) { apply_commit('5b51e982882955fe'); } # Which is then fixed by this: if (extract_from_file('pp_ctl.c', qr/\Qstatic void *docatch_body _((valist\E/)) { apply_commit('47aa779ee4c1a50e'); } if (extract_from_file('thrdvar.h', qr/PERLVARI\(Tprotect/) && !extract_from_file('embedvar.h', qr/PL_protect/)) { # Commit 312caa8e97f1c7ee didn't update embedvar.h apply_commit('e0284a306d2de082', 'embedvar.h'); } } if ($major == 5 && extract_from_file('sv.c', qr/PerlDir_close\(IoDIRP\((?:\(IO\*\))?sv\)\);/) && !(extract_from_file('toke.c', qr/\QIoDIRP(FILTER_DATA(AvFILLp(PL_rsfp_filters))) = NULL\E/) || extract_from_file('toke.c', qr/\QIoDIRP(datasv) = (DIR*)NULL;\E/))) { # Commit 93578b34124e8a3b, //depot/perl@3298 # close directory handles properly when localized, # tweaked slightly by commit 1236053a2c722e2b, # add test case for change#3298 # # The fix is the last part of: # # various fixes for clean build and test on win32; configpm broken, # needed to open myconfig.SH rather than myconfig; sundry adjustments # to bytecode stuff; tweaks to DYNAMIC_ENV_FETCH code to make it # work under win32; getenv_sv() changed to getenv_len() since SVs # aren't visible in the lower echelons; remove bogus exports from # config.sym; PERL_OBJECT-ness for C++ exception support; null out # IoDIRP in filter_del() or sv_free() will attempt to close it # # The changed code is modified subsequently by commit e0c198038146b7a4 apply_commit('a6c403648ecd5cc7', 'toke.c'); } if ($major < 6 && $^O eq 'netbsd' && !extract_from_file('unixish.h', qr/defined\(NSIG\).*defined\(__NetBSD__\)/)) { apply_patch(<<'EOPATCH') diff --git a/unixish.h b/unixish.h index 2a6cbcd..eab2de1 100644 --- a/unixish.h +++ b/unixish.h @@ -89,7 +89,7 @@ */ /* #define ALTERNATE_SHEBANG "#!" / **/ -#if !defined(NSIG) || defined(M_UNIX) || defined(M_XENIX) +#if !defined(NSIG) || defined(M_UNIX) || defined(M_XENIX) || defined(__NetBSD__) # include #endif EOPATCH } if ($major == 7 && $^O eq 'aix' && extract_from_file('ext/List/Util/Util.xs', qr/PUSHBLOCK/) && !extract_from_file('makedef.pl', qr/^Perl_cxinc/)) { # Need this to get List::Utils 1.03 and later to compile. # 1.03 also expects to call Perl_pp_rand. Commit d3632a54487acc5f # fixes this (for the unthreaded case), but it's not until 1.05, # two days later, that this is fixed properly. apply_commit('cbb96eed3f175499'); } if (($major >= 7 || $major <= 9) && $^O eq 'openbsd' && `uname -m` eq "sparc64\n" # added in 2000 by commit cb434fcc98ac25f5: && extract_from_file('regexec.c', qr!/\* No need to save/restore up to this paren \*/!) # re-indented in 2006 by commit 95b2444054382532: && extract_from_file('regexec.c', qr/^\t\tCURCUR cc;$/)) { # Need to work around a bug in (at least) OpenBSD's 4.6's sparc64 # # compiler ["gcc (GCC) 3.3.5 (propolice)"]. Between commits # 3ec562b0bffb8b8b (2002) and 1a4fad37125bac3e^ (2005) the darling thing # fails to compile any code for the statement cc.oldcc = PL_regcc; # # If you refactor the code to "fix" that, or force the issue using set # in the debugger, the stack smashing detection code fires on return # from S_regmatch(). Turns out that the compiler doesn't allocate any # (or at least enough) space for cc. # # Restore the "uninitialised" value for cc before function exit, and the # stack smashing code is placated. "Fix" 3ec562b0bffb8b8b (which # changes the size of auto variables used elsewhere in S_regmatch), and # the crash is visible back to bc517b45fdfb539b (which also changes # buffer sizes). "Unfix" 1a4fad37125bac3e and the crash is visible until # 5b47454deb66294b. Problem goes away if you compile with -O, or hack # the code as below. # # Hence this turns out to be a bug in (old) gcc. Not a security bug we # still need to fix. apply_patch(<<'EOPATCH'); diff --git a/regexec.c b/regexec.c index 900b491..6251a0b 100644 --- a/regexec.c +++ b/regexec.c @@ -2958,7 +2958,11 @@ S_regmatch(pTHX_ regnode *prog) I,I *******************************************************************/ case CURLYX: { - CURCUR cc; + union { + CURCUR hack_cc; + char hack_buff[sizeof(CURCUR) + 1]; + } hack; +#define cc hack.hack_cc CHECKPOINT cp = PL_savestack_ix; /* No need to save/restore up to this paren */ I32 parenfloor = scan->flags; @@ -2983,6 +2987,7 @@ S_regmatch(pTHX_ regnode *prog) n = regmatch(PREVOPER(next)); /* start on the WHILEM */ regcpblow(cp); PL_regcc = cc.oldcc; +#undef cc saySAME(n); } /* NOT REACHED */ EOPATCH } if ($major < 8 && $^O eq 'openbsd' && !extract_from_file('perl.h', qr/include /)) { # This is part of commit 3f270f98f9305540, applied at a slightly # different location in perl.h, where the context is stable back to # 5.000 apply_patch(<<'EOPATCH'); diff --git a/perl.h b/perl.h index 9418b52..b8b1a7c 100644 --- a/perl.h +++ b/perl.h @@ -496,6 +496,10 @@ register struct op *Perl_op asm(stringify(OP_IN_REGISTER)); # include #endif +/* If this causes problems, set i_unistd=undef in the hint file. */ +#ifdef I_UNISTD +# include +#endif /* Use all the "standard" definitions? */ #if defined(STANDARD_C) && defined(I_STDLIB) EOPATCH } } sub patch_ext { if (-f 'ext/POSIX/Makefile.PL' && extract_from_file('ext/POSIX/Makefile.PL', qr/Explicitly avoid including/)) { # commit 6695a346c41138df, which effectively reverts 170888cff5e2ffb7 # PERL5LIB is populated by make_ext.pl with paths to the modules we need # to run, don't override this with "../../lib" since that may not have # been populated yet in a parallel build. apply_commit('6695a346c41138df'); } if (-f 'ext/Hash/Util/Makefile.PL' && extract_from_file('ext/Hash/Util/Makefile.PL', qr/\bDIR\b.*'FieldHash'/)) { # ext/Hash/Util/Makefile.PL should not recurse to FieldHash's Makefile.PL # *nix, VMS and Win32 all know how to (and have to) call the latter directly. # As is, targets in ext/Hash/Util/FieldHash get called twice, which may result # in race conditions, and certainly messes up make clean; make distclean; apply_commit('550428fe486b1888'); } if ($major < 8 && $^O eq 'darwin' && !-f 'ext/DynaLoader/dl_dyld.xs') { checkout_file('ext/DynaLoader/dl_dyld.xs', 'f556e5b971932902'); apply_patch(<<'EOPATCH'); diff -u a/ext/DynaLoader/dl_dyld.xs~ a/ext/DynaLoader/dl_dyld.xs --- a/ext/DynaLoader/dl_dyld.xs~ 2011-10-11 21:41:27.000000000 +0100 +++ b/ext/DynaLoader/dl_dyld.xs 2011-10-11 21:42:20.000000000 +0100 @@ -41,6 +41,35 @@ #include "perl.h" #include "XSUB.h" +#ifndef pTHX +# define pTHX void +# define pTHX_ +#endif +#ifndef aTHX +# define aTHX +# define aTHX_ +#endif +#ifndef dTHX +# define dTHXa(a) extern int Perl___notused(void) +# define dTHX extern int Perl___notused(void) +#endif + +#ifndef Perl_form_nocontext +# define Perl_form_nocontext form +#endif + +#ifndef Perl_warn_nocontext +# define Perl_warn_nocontext warn +#endif + +#ifndef PTR2IV +# define PTR2IV(p) (IV)(p) +#endif + +#ifndef get_av +# define get_av perl_get_av +#endif + #define DL_LOADONCEONLY #include "dlutils.c" /* SaveError() etc */ @@ -185,7 +191,7 @@ CODE: DLDEBUG(1,PerlIO_printf(Perl_debug_log, "dl_load_file(%s,%x):\n", filename,flags)); if (flags & 0x01) - Perl_warn(aTHX_ "Can't make loaded symbols global on this platform while loading %s",filename); + Perl_warn_nocontext("Can't make loaded symbols global on this platform while loading %s",filename); RETVAL = dlopen(filename, mode) ; DLDEBUG(2,PerlIO_printf(Perl_debug_log, " libref=%x\n", RETVAL)); ST(0) = sv_newmortal() ; EOPATCH if ($major < 4 && !extract_from_file('util.c', qr/^form/m)) { apply_patch(<<'EOPATCH'); diff -u a/ext/DynaLoader/dl_dyld.xs~ a/ext/DynaLoader/dl_dyld.xs --- a/ext/DynaLoader/dl_dyld.xs~ 2011-10-11 21:56:25.000000000 +0100 +++ b/ext/DynaLoader/dl_dyld.xs 2011-10-11 22:00:00.000000000 +0100 @@ -60,6 +60,18 @@ # define get_av perl_get_av #endif +static char * +form(char *pat, ...) +{ + char *retval; + va_list args; + va_start(args, pat); + vasprintf(&retval, pat, &args); + va_end(args); + SAVEFREEPV(retval); + return retval; +} + #define DL_LOADONCEONLY #include "dlutils.c" /* SaveError() etc */ EOPATCH } } if ($major < 10) { if ($unfixable_db_file) { # Nothing we can do. } elsif (!extract_from_file('ext/DB_File/DB_File.xs', qr/^#ifdef AT_LEAST_DB_4_1$/)) { # This line is changed by commit 3245f0580c13b3ab my $line = extract_from_file('ext/DB_File/DB_File.xs', qr/^( status = \(?RETVAL->dbp->open\)?\(RETVAL->dbp, name, NULL, RETVAL->type, $)/); apply_patch(<<"EOPATCH"); diff --git a/ext/DB_File/DB_File.xs b/ext/DB_File/DB_File.xs index 489ba96..fba8ded 100644 --- a/ext/DB_File/DB_File.xs +++ b/ext/DB_File/DB_File.xs \@\@ -183,4 +187,8 \@\@ #endif +#if DB_VERSION_MAJOR > 4 || (DB_VERSION_MAJOR == 4 && DB_VERSION_MINOR >= 1) +# define AT_LEAST_DB_4_1 +#endif + /* map version 2 features & constants onto their version 1 equivalent */ \@\@ -1334,7 +1419,12 \@\@ SV * sv ; #endif +#ifdef AT_LEAST_DB_4_1 + status = (RETVAL->dbp->open)(RETVAL->dbp, NULL, name, NULL, RETVAL->type, + Flags, mode) ; +#else $line Flags, mode) ; +#endif /* printf("open returned %d %s\\n", status, db_strerror(status)) ; */ EOPATCH } } if ($major < 10 and -f 'ext/IPC/SysV/SysV.xs') { edit_file('ext/IPC/SysV/SysV.xs', sub { my $xs = shift; my $fixed = <<'EOFIX'; #include #if defined(HAS_MSG) || defined(HAS_SEM) || defined(HAS_SHM) #ifndef HAS_SEM # include #endif # ifdef HAS_MSG # include # endif # ifdef HAS_SHM # if defined(PERL_SCO) || defined(PERL_ISC) # include /* SHMLBA */ # endif # include # ifndef HAS_SHMAT_PROTOTYPE extern Shmat_t shmat (int, char *, int); # endif # if defined(HAS_SYSCONF) && defined(_SC_PAGESIZE) # undef SHMLBA /* not static: determined at boot time */ # define SHMLBA sysconf(_SC_PAGESIZE) # elif defined(HAS_GETPAGESIZE) # undef SHMLBA /* not static: determined at boot time */ # define SHMLBA getpagesize() # endif # endif #endif EOFIX $xs =~ s! #include .* (#ifdef newCONSTSUB|/\* Required)!$fixed$1!ms; return $xs; }); } } sub apply_fixups { my $fixups = shift; return unless $fixups; foreach my $file (@$fixups) { my $fh = open_or_die($file); my $line = <$fh>; close_or_die($fh); if ($line =~ /^#!perl\b/) { system $^X, $file and die_255("$^X $file failed: \$!=$!, \$?=$?"); } elsif ($line =~ /^#!(\/\S+)/) { system $file and die_255("$file failed: \$!=$!, \$?=$?"); } else { if (my ($target, $action, $pattern) = $line =~ m#^(\S+) ([=!])~ /(.*)/#) { if (length $pattern) { next unless -f $target; if ($action eq '=') { next unless extract_from_file($target, $pattern); } else { next if extract_from_file($target, $pattern); } } else { # Avoid the special case meaning of the empty pattern, # and instead use this to simply test for the file being # present or absent if ($action eq '=') { next unless -f $target; } else { next if -f $target; } } } system_or_die("patch -p1 <$file"); } } } # ex: set ts=8 sts=4 sw=4 et: