=encoding utf8 =head1 NAME release_managers_guide - Releasing a new version of perl 5.x Note that things change at each release, so there may be new things not covered here, or tools may need updating. =head1 MAKING A CHECKLIST If you are preparing to do a release, you can run the F script to generate a new version of this document that starts with a checklist for your release. This script is run as: perl Porting/make-rmg-checklist \ --type [BLEAD-POINT or MAINT or ...] > /tmp/rmg.pod You can also pass the C<--html> flag to generate an HTML document instead of POD. perl Porting/make-rmg-checklist --html \ --type [BLEAD-POINT or MAINT or ...] > /tmp/rmg.html =head1 SYNOPSIS This document describes the series of tasks required - some automatic, some manual - to produce a perl release of some description, be that a release candidate, or final, numbered release of maint or blead. The release process has traditionally been executed by the current pumpking. Blead releases from 5.11.0 forward are made each month on the 20th by a non-pumpking release engineer. The release engineer roster and schedule can be found in Porting/release_schedule.pod. This document both helps as a check-list for the release engineer and is a base for ideas on how the various tasks could be automated or distributed. The checklist of a typical release cycle is as follows: (5.10.1 is released, and post-release actions have been done) ...time passes... a few weeks before the release, a number of steps are performed, including bumping the version to 5.10.2 ...a few weeks passes... perl-5.10.2-RC1 is released perl-5.10.2 is released post-release actions are performed, including creating new perldelta.pod ... the cycle continues ... =head1 DETAILS Some of the tasks described below apply to all four types of release of Perl. (blead, RC, final release of maint, final release of blead). Some of these tasks apply only to a subset of these release types. If a step does not apply to a given type of release, you will see a notation to that effect at the beginning of the step. =head2 Release types =over 4 =item Release Candidate (RC) A release candidate is an attempt to produce a tarball that is a close as possible to the final release. Indeed, unless critical faults are found during the RC testing, the final release will be identical to the RC barring a few minor fixups (updating the release date in F, removing the RC status from F, etc). If faults are found, then the fixes should be put into a new release candidate, never directly into a final release. =item Stable/Maint release (MAINT). A release with an even version number, and subversion number > 0, such as 5.14.1 or 5.14.2. At this point you should have a working release candidate with few or no changes since. It's essentially the same procedure as for making a release candidate, but with a whole bunch of extra post-release steps. Note that for a maint release there are two versions of this guide to consider: the one in the maint branch, and the one in blead. Which one to use is a fine judgement. The blead one will be most up-to-date, while it might describe some steps or new tools that aren't applicable to older maint branches. It is probably best to review both versions of this document, but to most closely follow the steps in the maint version. =item A blead point release (BLEAD-POINT) A release with an odd version number, such as 5.15.0 or 5.15.1. This isn't for production, so it has less stability requirements than for other release types, and isn't preceded by RC releases. Other than that, it is similar to a MAINT release. =item Blead final release (BLEAD-FINAL) A release with an even version number, and subversion number == 0, such as 5.14.0. That is to say, it's the big new release once per year. It's essentially the same procedure as for making a release candidate, but with a whole bunch of extra post-release steps, even more than for MAINT. =back =for checklist begin =head2 Prerequisites Before you can make an official release of perl, there are a few hoops you need to jump through: =head3 PAUSE account with pumpkin status Make sure you have a PAUSE account suitable for uploading a perl release. If you don't have a PAUSE account, then request one: https://pause.perl.org/pause/query?ACTION=request_id Check that your account is allowed to upload perl distros: go to L and check that your PAUSE ID is listed there. If not, ask Andreas KE<0xf6>nig to add your ID to the list of people allowed to upload something called perl. You can find Andreas' email address at: https://pause.perl.org/pause/query?ACTION=pause_04imprint =head3 search.cpan.org pumpkin status Make sure that search.cpan.org knows that you're allowed to upload perl distros. Contact Graham Barr to make sure that you're on the right list. =head3 rt.perl.org update access Make sure you have permission to close tickets on L so you can respond to bug report as necessary during your stint. If you don't, make an account (if you don't have one) and contact the pumpking with your username to get ticket-closing permission. =head3 git checkout and commit bit You will need a working C installation, checkout of the perl git repository and perl commit bit. For information about working with perl and git, see F. If you are not yet a perl committer, you won't be able to make a release. Have a chat with whichever evil perl porter tried to talk you into the idea in the first place to figure out the best way to resolve the issue. =head3 git clone of https://github.com/perlorg/perlweb For updating the L web pages, either a Github account or sweet-talking somebody with a Github account into obedience is needed. This is only needed on the day of the release or shortly afterwards. =for checklist skip RC =head3 Quotation for release announcement epigraph I For all except an RC release of perl, you will need a quotation to use as an epigraph to your release announcement. =head2 Building a release - advance actions The work of building a release candidate for an even numbered release (BLEAD-FINAL) of perl generally starts several weeks before the first release candidate. Some of the following steps should be done regularly, but all I be done in the run up to a release. =head3 dual-life CPAN module synchronisation To see which core distro versions differ from the current CPAN versions: $ ./perl -Ilib Porting/core-cpan-diff -x -a However, this only checks whether the version recorded in F differs from the latest on CPAN. It doesn't tell you if the code itself has diverged from CPAN. You can also run an actual diff of the contents of the modules, comparing core to CPAN, to ensure that there were no erroneous/extraneous changes that need to be dealt with. You do this by not passing the C<-x> option: $ ./perl -Ilib Porting/core-cpan-diff -a -o /tmp/corediffs Passing C<-u cpan> will probably be helpful, since it limits the search to distributions with 'cpan' upstream source. (It's OK for blead upstream to differ from CPAN because those dual-life releases usually come I perl is released.) See also the C<-d> and C<-v> options for more detail (and the C<-u> option as mentioned above). You'll probably want to use the C<-c cachedir> option to avoid repeated CPAN downloads and may want to use C<-m file:///mirror/path> if you made a local CPAN mirror. Note that a minicpan mirror won't actually work, but can provide a good first pass to quickly get a list of modules which definitely haven't changed, to avoid having to download absolutely everything. For a BLEAD-POINT or BLEAD-FINAL release with 'cpan' upstream, if a CPAN release appears to be ahead of blead, then consider updating it (or asking the relevant porter to do so). (However, if this is a BLEAD-FINAL release or one of the last BLEAD-POINT releases before it and hence blead is in some kind of "code freeze" state (e.g. the sequence might be "contentious changes freeze", then "user-visible changes freeze" and finally "full code freeze") then any CPAN module updates must be subject to the same restrictions, so it may not be possible to update all modules until after the BLEAD-FINAL release.) If blead contains edits to a 'cpan' upstream module, this is naughty but sometimes unavoidable to keep blead tests passing. Make sure the affected file has a CUSTOMIZED entry in F. If you are making a MAINT release, run C on both blead and maint, then diff the two outputs. Compare this with what you expect, and if necessary, fix things up. For example, you might think that both blead and maint are synchronised with a particular CPAN module, but one might have some extra changes. =head3 How to sync a CPAN module with a cpan/ distro =over 4 =item * Fetch the most recent version from CPAN. =item * Unpack the retrieved tarball. Rename the old directory; rename the new directory to the original name. =item * Restore any F<.gitignore> file. This can be done by issuing C in the F directory. =item * Remove files we do not need. That is, remove any files that match the entries in C<@IGNORABLE> in F, and anything that matches the C section of the distro's entry in the C<%Modules> hash. =item * Restore any files mentioned in the C section, using C. Make any new customizations if necessary. Also, restore any files that are mentioned in C<@IGNORE>, but were checked into the repository anyway. =item * For any new files in the distro, determine whether they are needed. If not, delete them, and list them in either C or C<@INGORE>. Otherwise, add them to C, and run C to add the files to the repository. =item * For any files that are gone, remove them from C, and use C to tell git the files will be gone. =item * If the C file was changed in any of the previous steps, run C. =item * For any files that have an execute bit set, either remove the execute bit, or edit F =item * Run C (or C on Windows), see if C compiles. =item * Run the tests for the package. =item * Run the tests in F. =item * Update the C entry in F. =item * Run a full configure/build/test cycle. =item * If everything is ok, commit the changes. =back For entries with a non-simple C section, or with a C, you may have to take more steps than listed above. F is a script that automates most of the steps above; but see the comments at the beginning of the file. In particular, it has not yet been exercised on Windows, but will certainly require a set of Unix tools such as Cygwin, and steps that run C will need to run C instead. =head3 dual-life CPAN module stability Ensure dual-life CPAN modules are stable, which comes down to: for each module that fails its regression tests on $current did it fail identically on $previous? if yes, "SEP" (Somebody Else's Problem) else work out why it failed (a bisect is useful for this) attempt to group failure causes for each failure cause is that a regression? if yes, figure out how to fix it (more code? revert the code that broke it) else (presumably) it's relying on something un-or-under-documented should the existing behaviour stay? yes - goto "regression" no - note it in perldelta as a significant bugfix (also, try to inform the module's author) =head3 monitor smoke tests for failures Similarly, monitor the smoking of core tests, and try to fix. See L and L for a summary. See also L which has the raw reports. Similarly, monitor the smoking of perl for compiler warnings, and try to fix. =head3 update perldelta Get perldelta in a mostly finished state. Read F, and try to make sure that every section it lists is, if necessary, populated and complete. Copy edit the whole document. You won't be able to automatically fill in the "Updated Modules" section until after Module::CoreList is updated (as described below in L<"update Module::CoreList">). =head3 Bump the version number Do not do this yet for a BLEAD-POINT release! You will do this at the end of the release process. Increase the version number (e.g. from 5.12.0 to 5.12.1). For a release candidate for a stable perl, this should happen a week or two before the first release candidate to allow sufficient time for testing and smoking with the target version built into the perl executable. For subsequent release candidates and the final release, it is not necessary to bump the version further. There is a tool to semi-automate this process: $ ./perl -Ilib Porting/bump-perl-version -i 5.10.0 5.10.1 Remember that this tool is largely just grepping for '5.10.0' or whatever, so it will generate false positives. Be careful not change text like "this was fixed in 5.10.0"! Use git status and git diff to select changes you want to keep. Be particularly careful with F, which contains a mixture of C<5.10.0>-type strings, some of which need bumping on every release, and some of which need to be left unchanged. The line in F about "is binary incompatible with" requires a correct choice of earlier version to declare incompatibility with. When doing a BLEAD-POINT or BLEAD-FINAL release, also make sure the C constants in F are in sync with the version you're releasing, unless you're absolutely sure the release you're about to make is 100% binary compatible to an earlier release. When releasing a MAINT perl version, the C constants C be changed as we aim to guarantee binary compatibility in maint branches. After editing, regenerate uconfig.h (this must be run on a system with a /bin/sh available): $ perl regen/uconfig_h.pl This might not cause any new changes. Test your changes: $ git clean -xdf # careful if you don't have local files to keep! $ ./Configure -des -Dusedevel $ make $ make test Commit your changes: $ git status $ git diff B $ git commit -a -m 'Bump the perl version in various places for 5.x.y' At this point you may want to compare the commit with a previous bump to see if they look similar. See commit f7cf42bb69 for an example of a previous version bump. When the version number is bumped, you should also update Module::CoreList (as described below in L<"update Module::CoreList">) to reflect the new version number. =head3 update INSTALL Review and update INSTALL to account for the change in version number; in particular, the "Coexistence with earlier versions of perl 5" section. Be particularly careful with the section "Upgrading from 5.X.Y or earlier". The "X.Y" needs to be changed to the most recent version that we are I binary compatible with. For MAINT and BLEAD-FINAL releases, this needs to refer to the last release in the previous development cycle (so for example, for a 5.14.x release, this would be 5.13.11). For BLEAD-POINT releases, it needs to refer to the previous BLEAD-POINT release (so for 5.15.3 this would be 5.15.2). =head3 Check copyright years Check that the copyright years are up to date by running: $ ./perl t/porting/copyright.t --now Remedy any test failures by editing README or perl.c accordingly (search for the "Copyright"). If updating perl.c, check if the file's own copyright date in the C comment at the top needs updating, as well as the one printed by C<-v>. =head3 Check more build configurations Try running the full test suite against multiple Perl configurations. Here are some sets of Configure flags you can try: =over 4 =item * C<-Duseshrplib -Dusesitecustomize> =item * C<-Duserelocatableinc> =item * C<-Dusethreads> =back If you have multiple compilers on your machine, you might also consider compiling with C<-Dcc=$other_compiler>. =head3 update perlport L has a section currently named I that indicates which platforms are known to build in the current release. If necessary update the list and the indicated version number. =head3 check a readonly build Even before other prep work, follow the steps in L and test it locally. Because a perl source tarballs sets many files read-only, it could test differently than tests run from the repository. After you're sure permissions aren't a problem, delete the generated directory and tarballs. =head2 Building a release - on the day This section describes the actions required to make a release that are performed near to, or on the actual release day. =head3 re-check earlier actions Review all the actions in the previous section, L<"Building a release - advance actions"> to ensure they are all done and up-to-date. =head3 create a release branch For BLEAD-POINT releases, making a release from a release branch avoids the need to freeze blead during the release. This is less important for BLEAD-FINAL, MAINT, and RC releases, since blead will already be frozen in those cases. Create the branch by running git checkout -b release-5.xx.yy =head3 build a clean perl Make sure you have a gitwise-clean perl directory (no modified files, unpushed commits etc): $ git status $ git clean -dxf then configure and build perl so that you have a Makefile and porting tools: $ ./Configure -Dusedevel -des && make =head3 update Module::CoreList =head4 Bump Module::CoreList* $VERSIONs If necessary, bump C<$Module::CoreList::VERSION> (there's no need to do this for every RC; in RC1, bump the version to a new clean number that will appear in the final release, and leave as-is for the later RCs and final). It may also happen that C has been modified in blead, and hence has a new version number already. (But make sure it is not the same number as a CPAN release.) C<$Module::CoreList::TieHashDelta::VERSION> and C<$Module::CoreList::Utils::VERSION> should always be equal to C<$Module::CoreList::VERSION>. If necessary, bump those two versions to match before proceeding. =head4 Update C with module version data for the new release. Note that if this is a MAINT release, you should run the following actions from the maint branch, but commit the C changes in I and subsequently cherry-pick any releases since the last maint release and then your recent commit. XXX need a better example [ Note that the procedure for handling Module::CoreList in maint branches is a bit complex, and the RMG currently don't describe a full and workable approach. The main issue is keeping Module::CoreList and its version number synchronised across all maint branches, blead and CPAN, while having to bump its version number for every RC release. See this brief p5p thread: Message-ID: <20130311174402.GZ2294@iabyn.com> If you can devise a workable system, feel free to try it out, and to update the RMG accordingly! DAPM May 2013 ] F uses ftp.funet.fi to verify information about dual-lived modules on CPAN. It can use a full, local CPAN mirror and/or fall back on HTTP::Tiny to fetch package metadata remotely. (If you'd prefer to have a full CPAN mirror, see http://www.cpan.org/misc/cpan-faq.html#How_mirror_CPAN) Then change to your perl checkout, and if necessary, $ make Then, If you have a local CPAN mirror, run: $ ./perl -Ilib Porting/corelist.pl ~/my-cpan-mirror Otherwise, run: $ ./perl -Ilib Porting/corelist.pl cpan This will chug for a while, possibly reporting various warnings about badly-indexed CPAN modules unrelated to the modules actually in core. Assuming all goes well, it will update F and possibly F and/or F. Check those files over carefully: $ git diff dist/Module-CoreList/lib/Module/CoreList.pm $ git diff dist/Module-CoreList/lib/Module/CoreList.pod $ git diff dist/Module-CoreList/lib/Module/CoreList/Utils.pm =head4 Bump version in Module::CoreList F Also edit Module::CoreList's new version number in its F file. =head4 Add Module::CoreList version bump to perldelta Add a perldelta entry for the new Module::CoreList version. =for checklist skip RC =head4 Update C<%Module::CoreList::released> and C In addition, if this is a final release (rather than a release candidate): =over 4 =item * Update this version's entry in the C<%released> hash with today's date. =item * Make sure that the script has correctly updated the C section (Note, the C section is in F) =back =head4 Commit Module::CoreList changes Finally, commit the new version of Module::CoreList: (unless this is for MAINT; in which case commit it to blead first, then cherry-pick it back). $ git commit -m 'Update Module::CoreList for 5.x.y' dist/Module-CoreList/Changes dist/Module-CoreList/lib/Module/CoreList.pm dist/Module-CoreList/lib/Module/CoreList.pod dist/Module-CoreList/lib/Module/CoreList/Utils.pm =head4 Rebuild and test Build and test to get the changes into the currently built lib directory and to ensure all tests are passing. =head3 finalize perldelta Finalize the perldelta. In particular, fill in the Acknowledgements section, which can be generated with something like: $ perl Porting/acknowledgements.pl v5.15.0..HEAD Fill in the "New/Updated Modules" sections now that Module::CoreList is updated: $ ./perl -Ilib Porting/corelist-perldelta.pl --mode=update pod/perldelta.pod Ideally, also fill in a summary of the major changes to each module for which an entry has been added by F. Re-read the perldelta to try to find any embarrassing typos and thinkos; remove any C or C flags; update the "Known Problems" section with any serious issues for which fixes are not going to happen now; and run through pod and spell checkers, e.g. $ podchecker -warnings -warnings pod/perldelta.pod $ spell pod/perldelta.pod Also, you may want to generate and view an HTML version of it to check formatting, e.g. $ ./perl -Ilib ext/Pod-Html/bin/pod2html pod/perldelta.pod > /tmp/perldelta.html Another good HTML preview option is http://search.cpan.org/pod2html If you make changes, be sure to commit them. =for checklist skip BLEAD-POINT MAINT RC =head3 remove stale perldeltas For the first RC release that is ONLY for a BLEAD-FINAL, the perldeltas from the BLEAD-POINT releases since the previous BLEAD-FINAL should have now been consolidated into the current perldelta, and hence are now just useless clutter. They can be removed using: $ git rm ... For example, for RC0 of 5.16.0: $ cd pod $ git rm perldelta515*.pod =for checklist skip BLEAD-FINAL BLEAD-POINT =head3 add recent perldeltas For the first RC for a MAINT release, copy in any recent perldeltas from blead that have been added since the last release on this branch. This should include any recent maint releases on branches older than your one, but not newer. For example if you're producing a 5.14.x release, copy any perldeltas from recent 5.10.x, 5.12.x etc maint releases, but not from 5.16.x or higher. Remember to $ git add ... =head3 update and commit perldelta files If you have added or removed any perldelta files via the previous two steps, then edit F to add/remove them from its table of contents, then run F to propagate your changes there into all the other files that mention them (including F). You'll need to C the files that it changes. Then build a clean perl and do a full test $ git status $ git clean -dxf $ ./Configure -Dusedevel -des $ make $ make test Once all tests pass, commit your changes. =head3 build a clean perl If you skipped the previous step (adding/removing perldeltas), again, make sure you have a gitwise-clean perl directory (no modified files, unpushed commits etc): $ git status $ git clean -dxf then configure and build perl so that you have a Makefile and porting tools: $ ./Configure -Dusedevel -des && make =for checklist skip BLEAD-FINAL BLEAD-POINT =head3 synchronise from blead's perlhist.pod For the first RC for a MAINT release, copy in the latest F from blead; this will include details of newer releases in all branches. In theory, blead's version should be a strict superset of the one in this branch, but it's probably safest to diff them first to ensure that there's nothing in this branch that was forgotten from blead: $ diff pod/perlhist.pod ..../blead/pod/perlhist.pod $ cp ..../blead/pod/perlhist.pod pod/ $ git commit -m 'sync perlhist from blead' pod/perlhist.pod =for checklist skip RC =head3 update perlhist.pod I Add an entry to F with the release date, e.g.: David 5.10.1 2009-Aug-06 Make sure that the correct pumpking is listed in the left-hand column, and if this is the first release under the stewardship of a new pumpking, make sure that his or her name is listed in the section entitled C. I, also update the "SELECTED RELEASE SIZES" section with the output of F. Be sure to commit your changes: $ git commit -m 'add new release to perlhist' pod/perlhist.pod =for checklist skip BLEAD-POINT =head3 update patchlevel.h I Update F to add a C<-RC1>-or-whatever string; or, if this is a final release, remove it. For example: static const char * const local_patches[] = { NULL + ,"RC1" PERL_GIT_UNPUSHED_COMMITS /* do not remove this line */ Be sure to commit your change: $ git commit -m 'bump version to RCnnn' patchlevel.h =head3 run makemeta to update META files $ ./perl -Ilib Porting/makemeta Be sure to commit any changes (if applicable): $ git status # any changes? $ git commit -m 'Update META files' META.* =head3 build, test and check a fresh perl Build perl, then make sure it passes its own test suite, and installs: $ git clean -xdf $ ./Configure -des -Dprefix=/tmp/perl-5.x.y-pretest # or if it's an odd-numbered version: $ ./Configure -des -Dusedevel -Dprefix=/tmp/perl-5.x.y-pretest $ make test install Check that the output of C and C are as expected, especially as regards version numbers, patch and/or RC levels, and @INC paths. Note that as they have been built from a git working directory, they will still identify themselves using git tags and commits. (Note that for an odd-numbered version, perl will install itself as C). C will identify itself as: This is perl 5, version X, subversion Y (v5.X.Y (v5.X.Z-NNN-gdeadbeef)) where 5.X.Z is the latest tag, NNN the number of commits since this tag, and C<< deadbeef >> commit of that tag. Then delete the temporary installation. =head3 create the release tag Create the tag identifying this release (e.g.): $ git tag v5.11.0 -m "First release of the v5.11 series!" It is B important that from this point forward, you not push your git changes to the Perl master repository. If anything goes wrong before you publish your newly-created tag, you can delete and recreate it. Once you push your tag, we're stuck with it and you'll need to use a new version number for your release. =head3 build the tarball Before you run the following, you might want to install 7-Zip (the C package under Debian or the C port on MacPorts) or the AdvanceCOMP suite (e.g. the C package under Debian, or the C port on macports - 7-Zip on Windows is the same code as AdvanceCOMP, so Windows users get the smallest files first time). These compress about 5% smaller than gzip and bzip2. Over the lifetime of your distribution this will save a lot of people a small amount of download time and disk space, which adds up. Create a tarball. Use the C<-s> option to specify a suitable suffix for the tarball and directory name: $ cd root/of/perl/tree $ make distclean $ git clean -xdf # make sure perl and git agree on files $ git status # and there's nothing lying around $ perl Porting/makerel -b -s RC1 # for a release candidate $ perl Porting/makerel -b # for a final release This creates the directory F<../perl-x.y.z-RC1> or similar, copies all the MANIFEST files into it, sets the correct permissions on them, then tars it up as F<../perl-x.y.z-RC1.tar.gz>. With C<-b>, it also creates a C file. If you're getting your tarball suffixed with -uncommitted and you're sure your changes were all committed, you can override the suffix with: $ perl Porting/makerel -b -s '' XXX if we go for extra tags and branches stuff, then add the extra details here Finally, clean up the temporary directory, e.g. $ rm -rf ../perl-x.y.z-RC1 =head3 test the tarball Once you have a tarball it's time to test the tarball (not the repository). =head4 Copy the tarball to a web server Copy the tarballs (.gz and possibly .bz2) to a web server somewhere you have access to. =head4 Download the tarball to another machine Download the tarball to some other machine. For a release candidate, you really want to test your tarball on two or more different platforms and architectures. The #p5p IRC channel on irc.perl.org is a good place to find willing victims. =head4 Check that F works Check that basic configuration and tests work on each test machine: $ ./Configure -des && make all test =head4 Run the test harness and install Check that the test harness and install work on each test machine: $ make distclean $ ./Configure -des -Dprefix=/install/path && make all test_harness install $ cd /install/path =head4 Check C and C Check that the output of C and C are as expected, especially as regards version numbers, patch and/or RC levels, and @INC paths. Note that the results may be different without a F<.git/> directory, which is why you should test from the tarball. =head4 Run the Installation Verification Procedure utility $ ./perl utils/perlivp ... All tests successful. $ =head4 Compare the installed paths to the last release Compare the pathnames of all installed files with those of the previous release (i.e. against the last installed tarball on this branch which you have previously verified using this same procedure). In particular, look for files in the wrong place, or files no longer included which should be. For example, suppose the about-to-be-released version is 5.10.1 and the previous is 5.10.0: cd installdir-5.10.0/ find . -type f | perl -pe's/5\.10\.0/5.10.1/g' | sort > /tmp/f1 cd installdir-5.10.1/ find . -type f | sort > /tmp/f2 diff -u /tmp/f[12] =head4 Bootstrap the CPAN client Bootstrap the CPAN client on the clean install: $ bin/cpan =head4 Install the Inline module with CPAN and test it Try installing a popular CPAN module that's reasonably complex and that has dependencies; for example: CPAN> install Inline CPAN> quit Check that your perl can run this: $ bin/perl -lwe "use Inline C => q[int f() { return 42;}]; print f" 42 $ =head4 Make sure that perlbug works Test L with the following: $ bin/perlbug ... Subject: test bug report Local perl administrator [yourself]: Editor [vi]: Module: Category [core]: Severity [low]: (edit report) Action (Send/Display/Edit/Subject/Save to File): f Name of file to save message in [perlbug.rep]: Action (Send/Display/Edit/Subject/Save to File): q and carefully examine the output (in F), especially the "Locally applied patches" section. If everything appears okay, then delete the file, and try it again, this time actually submitting the bug report. Check that it shows up, then remember to close it! =for checklist skip BLEAD-POINT =head3 monitor smokes XXX This is probably irrelevant if working on a release branch, though MAINT or RC might want to push a smoke branch and wait. Wait for the smoke tests to catch up with the commit which this release is based on (or at least the last commit of any consequence). Then check that the smoke tests pass (particularly on Win32). If not, go back and fix things. Note that for I releases this may not be practical. It takes a long time for the smokers to catch up, especially the Win32 smokers. This is why we have a RC cycle for I and I releases, but for I releases sometimes the best you can do is to plead with people on IRC to test stuff on their platforms, fire away, and then hope for the best. =head3 upload to PAUSE Once smoking is okay, upload it to PAUSE. This is the point of no return. If anything goes wrong after this point, you will need to re-prepare a new release with a new minor version or RC number. https://pause.perl.org/ (Login, then select 'Upload a file to CPAN') If your workstation is not connected to a high-bandwidth, high-reliability connection to the Internet, you should probably use the "GET URL" feature (rather than "HTTP UPLOAD") to have PAUSE retrieve the new release from wherever you put it for testers to find it. This will eliminate anxious gnashing of teeth while you wait to see if your 15 megabyte HTTP upload successfully completes across your slow, twitchy cable modem. You can make use of your home directory on dromedary for this purpose: F maps to F, where F is your login account on dromedary. I: if your upload is partially successful, you may need to contact a PAUSE administrator or even bump the version of perl. Upload both the .gz and .bz2 versions of the tarball. Do not proceed any further until you are sure that your tarballs are on CPAN. Check your authors directory www.cpan.org (the globally balanced "fast" mirror) to confirm that your uploads have been successful. =for checklist skip RC BLEAD-POINT =head3 wait for indexing I Wait until you receive notification emails from the PAUSE indexer confirming that your uploads have been received. IMPORTANT -- you will probably get an email that indexing has failed, due to module permissions. This is considered normal. =for checklist skip BLEAD-POINT =head3 disarm patchlevel.h I Disarm the F change; for example, static const char * const local_patches[] = { NULL - ,"RC1" PERL_GIT_UNPUSHED_COMMITS /* do not remove this line */ Be sure to commit your change: $ git commit -m 'disarm RCnnn bump' patchlevel.h =head3 announce to p5p Mail p5p to announce your new release, with a quote you prepared earlier. Use the template at Porting/release_announcement_template.txt Send a carbon copy to C =head3 merge release branch back to blead Merge the (local) release branch back into master now, and delete it. git checkout blead git pull git merge release-5.xx.yy git push git branch -d release-5.xx.yy Note: The merge will create a merge commit if other changes have been pushed to blead while you've been working on your release branch. Do NOT rebase your branch to avoid the merge commit (as you might normally do when merging a small branch into blead) since doing so will invalidate the tag that you created earlier. =head3 publish the release tag Now that you've shipped the new perl release to PAUSE and pushed your changes to the Perl master repository, it's time to publish the tag you created earlier too (e.g.): $ git push origin tag v5.11.0 =head3 update epigraphs.pod Add your quote to F and commit it. You can include the customary link to the release announcement even before your message reaches the web-visible archives by looking for the X-List-Archive header in your message after receiving it back via perl5-porters. =head3 blog about your epigraph If you have a blog, please consider writing an entry in your blog explaining why you chose that particular quote for your epigraph. =for checklist skip RC =head3 Module::CoreList nagging I Remind the current maintainer of C to push a new release to CPAN. =for checklist skip RC =head3 new perldelta I Create a new perldelta. =over 4 =item * Confirm that you have a clean checkout with no local changes. =item * Run F =item * Run the C commands it outputs to add new and modified files. =item * Verify that the build still works, by running C<./Configure> and C. (On Win32 use the appropriate make utility). =item * If F spots errors in the new F, run C<./perl -MTestInit t/porting/podcheck.t | less> for more detail. Skip to the end of its test output to see the options it offers you. =item * When C passes, commit the new perldelta. =back At this point you may want to compare the commit with a previous bump to see if they look similar. See commit ba03bc34a4 for an example of a previous version bump. =for checklist skip MAINT RC =head3 bump version I If this was a BLEAD-FINAL release (i.e. the first release of a new maint series, 5.x.0 where x is even), then bump the version in the blead branch in git, e.g. 5.12.0 to 5.13.0. First, add a new feature bundle to F, initially by just copying the exiting entry, and bump the file's $VERSION (after the __END__ marker); e.g. "5.14" => [qw(switch say state unicode_strings)], + "5.15" => [qw(switch say state unicode_strings)], Run F to propagate the changes to F. Then follow the section L<"Bump the version number"> to bump the version in the remaining files and test and commit. If this was a BLEAD-POINT release, then just follow the section L<"Bump the version number">. After bumping the version, follow the section L<"update INSTALL"> to ensure all version number references are correct. =head3 clean build and test Run a clean build and test to make sure nothing obvious is broken. In particular, F is intentionally exempted from podchecker tests, to avoid false positives about placeholder text. However, once it's copied to F the contents can now cause test failures. Problems should resolved by doing one of the following: =over =item 1 Replace placeholder text with correct text. =item 2 If the problem is from a broken placeholder link, you can add it to the array C<@perldelta_ignore_links> in F. Lines containing such links should be marked with C so that they get cleaned up before the next release. =item 3 Following the instructions output by F on how to update its exceptions database. =back =head3 push commits Finally, push any commits done above. $ git push origin .... =for checklist skip BLEAD-POINT MAINT RC =head3 create maint branch I If this was a BLEAD-FINAL release (i.e. the first release of a new maint series, 5.x.0 where x is even), then create a new maint branch based on the commit tagged as the current release. Assuming you're using git 1.7.x or newer: $ git checkout -b maint-5.12 v5.12.0 $ git push origin -u maint-5.12 =for checklist skip BLEAD-POINT MAINT RC =head3 make the maint branch available in the APC Clone the new branch into /srv/gitcommon/branches on camel so the APC will receive its changes. $ git clone --branch maint-5.14 /gitroot/perl.git \ ? /srv/gitcommon/branches/perl-5.14.x $ chmod -R g=u /srv/gitcommon/branches/perl-5.14.x And nag the sysadmins to make this directory available via rsync. XXX Who are the sysadmins? Contact info? =for checklist skip BLEAD-POINT RC =head3 copy perldelta.pod to blead I Copy the perldelta.pod for this release into blead; for example: $ cd ..../blead $ cp -i ../5.10.x/pod/perldelta.pod pod/perl5101delta.pod # for example $ git add pod/perl5101delta.pod Don't forget to set the NAME correctly in the new file (e.g. perl5101delta rather than perldelta). Edit F to add an entry for the file, e.g.: perl5101delta Perl changes in version 5.10.1 Then rebuild various files: $ perl Porting/pod_rules.pl Finally, commit and push: $ git commit -a -m 'add perlXXXdelta' $ git push origin .... =for checklist skip BLEAD-POINT =head3 copy perlhist.pod entries to blead Make sure any recent F entries are copied to F on blead. e.g. 5.8.9 2008-Dec-14 =head3 bump RT version number Log into http://rt.perl.org/ and check whether the new version is in the RT fields C and C. The easiest way to determine this is to open up any ticket for modification and check the drop downs next to the C and C labels. Here, try this link: L If the new version is not listed there, send an email to C requesting this. =head3 Relax! I. Thanks for releasing perl! =head2 Building a release - the day after =head3 link announcement in epigraphs.pod Add, to your quote to F, a link to the release announcement in the web-visible mailing list archive. Commit it. =for checklist skip BLEAD-FINAL, MAINT, RC =head3 update Module::CoreList I After Module::CoreList has shipped to CPAN by the maintainer, update Module::CoreList in the source so that it reflects the new blead version number: =over 4 =item * Update F to list the new DISTRIBUTION on CPAN, which should be identical to what is currently in blead. =item * Bump the $VERSION in F, F and F. =item * If you have a local CPAN mirror, run: $ ./perl -Ilib Porting/corelist.pl ~/my-cpan-mirror Otherwise, run: $ ./perl -Ilib Porting/corelist.pl cpan This will update F, F and F as it did before, but this time adding new sections for the next BLEAD-POINT release. =item * Add the new $Module::CoreList::VERSION to F. =item * Update F to mention the upgrade to Module::CoreList. =item * Remake perl to get your changed .pm files propagated into F and then run at least the F tests and the test_porting makefile target to check that they're ok. =item * Run $ ./perl -Ilib -MModule::CoreList -le 'print Module::CoreList->find_version($]) ? "ok" : "not ok"' and check that it outputs "ok" to prove that Module::CoreList now knows about blead's current version. =item * Commit and push your changes. =back =head3 check tarball availability Check various website entries to make sure the that tarball has appeared and is properly indexed: =over 4 =item * Check your author directory under L to ensure that the tarballs are available on the website. =item * Check C on CPAN (on a fast mirror) to ensure that links to the new tarballs have appeared: There should be links in C (which is accumulating all new versions), and (for BLEAD-FINAL and MAINT only) an appropriate mention in C (which describes the latest versions in each stable branch, with links). The C links should appear automatically, some hours after upload. If they don't, or the C description is inadequate, ask Ask . =item * Check L to ensure that the C updates have been correctly mirrored to the website. If they haven't, ask Ask . =item * Check L to see if it has indexed the distribution. It should be visible at a URL like C. =back =for checklist skip RC =head3 update dev.perl.org I In your C repository, link to the new release. For a new latest-maint release, edit F. Otherwise, edit F. Then make a pull request to Leo Lapworth. If this fails for some reason and you cannot cajole anybody else into submitting that change, you can mail Leo as last resort. This repository can be found on L. =head3 update release manager's guide Go over your notes from the release (you did take some, right?) and update F with any fixes or information that will make life easier for the next release manager. =for checklist end =head1 SOURCE Based on http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2009-05/msg00608.html, plus a whole bunch of other sources, including private correspondence. =cut