# hints/linux.sh # Original version by rsanders # Additional support by Kenneth Albanowski # # ELF support by H.J. Lu # Additional info from Nigel Head # and Kenneth Albanowski # # Consolidated by Andy Dougherty # # Updated Thu Feb 8 11:56:10 EST 1996 # Updated Thu May 30 10:50:22 EDT 1996 by # Updated Fri Jun 21 11:07:54 EDT 1996 # NDBM support for ELF re-enabled by # No version of Linux supports setuid scripts. d_suidsafe='undef' # No version of Linux needs libutil for perl. i_libutil='undef' # Debian and Red Hat, and perhaps other vendors, provide both runtime and # development packages for some libraries. The runtime packages contain shared # libraries with version information in their names (e.g., libgdbm.so.1.7.3); # the development packages supplement this with versionless shared libraries # (e.g., libgdbm.so). # # If you want to link against such a library, you must install the development # version of the package. # # These packages use a -dev naming convention in both Debian and Red Hat: # libgdbmg1 (non-development version of GNU libc 2-linked GDBM library) # libgdbmg1-dev (development version of GNU libc 2-linked GDBM library) # So make sure that for any libraries you wish to link Perl with under # Debian or Red Hat you have the -dev packages installed. # SuSE Linux can be used as cross-compilation host for Cray XT4 Catamount/Qk. if test -d /opt/xt-pe then case "`${cc:-cc} -V 2>&1`" in *catamount*) . hints/catamount.sh; return ;; esac fi # Some operating systems (e.g., Solaris 2.6) will link to a versioned shared # library implicitly. For example, on Solaris, `ld foo.o -lgdbm' will find an # appropriate version of libgdbm, if one is available; Linux, however, doesn't # do the implicit mapping. ignore_versioned_solibs='y' # BSD compatibility library no longer needed # 'kaffe' has a /usr/lib/libnet.so which is not at all relevant for perl. # bind causes issues with several reentrant functions set `echo X "$libswanted "| sed -e 's/ bsd / /' -e 's/ net / /' -e 's/ bind / /'` shift libswanted="$*" # Debian 4.0 puts ndbm in the -lgdbm_compat library. echo $libs if echo " $libswanted " | grep -q ' gdbm '; then # Only add if gdbm is in libswanted. libswanted="$libswanted gdbm_compat" fi # Configure may fail to find lstat() since it's a static/inline # function in . d_lstat=define # malloc wrap works case "$usemallocwrap" in '') usemallocwrap='define' ;; esac # The system malloc() is about as fast and as frugal as perl's. # Since the system malloc() has been the default since at least # 5.001, we might as well leave it that way. --AD 10 Jan 2002 case "$usemymalloc" in '') usemymalloc='n' ;; esac uname_minus_m="`$run uname -m 2>/dev/null`" uname_minus_m="${uname_minus_m:-"$targetarch"}" # Check if we're about to use Intel's ICC compiler case "`${cc:-cc} -V 2>&1`" in *"Intel(R) C++ Compiler"*|*"Intel(R) C Compiler"*) # record the version, formats: # icc (ICC) 10.1 20080801 # icpc (ICC) 10.1 20080801 # followed by a copyright on the second line ccversion=`${cc:-cc} --version | sed -n -e 's/^icp\?c \((ICC) \)\?//p'` # This is needed for Configure's prototype checks to work correctly # The -mp flag is needed to pass various floating point related tests # The -no-gcc flag is needed otherwise, icc pretends (poorly) to be gcc ccflags="-we147 -mp -no-gcc $ccflags" # Prevent relocation errors on 64bits arch case "$uname_minus_m" in *ia64*|*x86_64*) cccdlflags='-fPIC' ;; esac # If we're using ICC, we usually want the best performance case "$optimize" in '') optimize='-O3' ;; esac ;; *" Sun "*"C"*) # Sun's C compiler, which might have a 'tag' name between # 'Sun' and the 'C': Examples: # cc: Sun C 5.9 Linux_i386 Patch 124871-01 2007/07/31 # cc: Sun Ceres C 5.10 Linux_i386 2008/07/10 test "$optimize" || optimize='-xO2' cccdlflags='-KPIC' lddlflags='-G -Bdynamic' # Sun C doesn't support gcc attributes, but, in many cases, doesn't # complain either. Not all cases, though. d_attribute_format='undef' d_attribute_malloc='undef' d_attribute_nonnull='undef' d_attribute_noreturn='undef' d_attribute_pure='undef' d_attribute_unused='undef' d_attribute_warn_unused_result='undef' ;; esac case "$optimize" in # use -O2 by default ; -O3 doesn't seem to bring significant benefits with gcc '') optimize='-O2' case "$uname_minus_m" in ppc*) # on ppc, it seems that gcc (at least gcc 3.3.2) isn't happy # with -O2 ; so downgrade to -O1. optimize='-O1' ;; ia64*) # This architecture has had various problems with gcc's # in the 3.2, 3.3, and 3.4 releases when optimized to -O2. See # RT #37156 for a discussion of the problem. case "`${cc:-gcc} -v 2>&1`" in *"version 3.2"*|*"version 3.3"*|*"version 3.4"*) ccflags="-fno-delete-null-pointer-checks $ccflags" ;; esac ;; esac ;; esac # Ubuntu 11.04 (and later, presumably) doesn't keep most libraries # (such as -lm) in /lib or /usr/lib. So we have to ask gcc to tell us # where to look. We don't want gcc's own libraries, however, so we # filter those out. # This could be conditional on Unbuntu, but other distributions may # follow suit, and this scheme seems to work even on rather old gcc's. # This unconditionally uses gcc because even if the user is using another # compiler, we still need to find the math library and friends, and I don't # know how other compilers will cope with that situation. # Morever, if the user has their own gcc earlier in $PATH than the system gcc, # we don't want its libraries. So we try to prefer the system gcc # Still, as an escape hatch, allow Configure command line overrides to # plibpth to bypass this check. if [ -x /usr/bin/gcc ] ; then gcc=/usr/bin/gcc else gcc=gcc fi case "$plibpth" in '') plibpth=`LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep -v 'gcc' | sed -e 's:/$::'` set X $plibpth # Collapse all entries on one line shift plibpth="$*" ;; esac # libquadmath is sometimes installed as gcc internal library, # so contrary to our usual policy of *not* looking at gcc internal # directories we now *do* look at them, in case they contain # the quadmath library. # XXX This may apply to other gcc internal libraries, if such exist. # XXX This could be at Configure level, but then the $gcc is messy. case "$usequadmath" in "$define") for d in `LANG=C LC_ALL=C $gcc $ccflags $ldflags -print-search-dirs | grep libraries | cut -f2- -d= | tr ':' $trnl | grep 'gcc' | sed -e 's:/$::'` do case `ls $d/*libquadmath*$so* 2>/dev/null` in $d/*libquadmath*$so*) xlibpth="$xlibpth $d" ;; esac done ;; esac case "$libc" in '') # If you have glibc, then report the version for ./myconfig bug reporting. # (Configure doesn't need to know the specific version since it just uses # gcc to load the library for all tests.) # We don't use __GLIBC__ and __GLIBC_MINOR__ because they # are insufficiently precise to distinguish things like # libc-2.0.6 and libc-2.0.7. for p in $plibpth do for trylib in libc.so.6 libc.so do if $test -e $p/$trylib; then libc=`ls -l $p/$trylib | awk '{print $NF}'` if $test "X$libc" != X; then break fi fi done if $test "X$libc" != X; then break fi done ;; esac if ${sh:-/bin/sh} -c exit; then echo '' echo 'You appear to have a working bash. Good.' else cat << 'EOM' >&4 *********************** Warning! ********************* It would appear you have a defective bash shell installed. This is likely to give you a failure of op/exec test #5 during the test phase of the build, Upgrading to a recent version (1.14.4 or later) should fix the problem. ****************************************************** EOM fi # On SPARClinux, # The following csh consistently coredumped in the test directory # "/home/mikedlr/perl5.003_94/t", though not most other directories. #Name : csh Distribution: Red Hat Linux (Rembrandt) #Version : 5.2.6 Vendor: Red Hat Software #Release : 3 Build Date: Fri May 24 19:42:14 1996 #Install date: Thu Jul 11 16:20:14 1996 Build Host: itchy.redhat.com #Group : Shells Source RPM: csh-5.2.6-3.src.rpm #Size : 184417 #Description : BSD c-shell # For this reason I suggest using the much bug-fixed tcsh for globbing # where available. # November 2001: That warning's pretty old now and probably not so # relevant, especially since perl now uses File::Glob for globbing. # We'll still look for tcsh, but tone down the warnings. # Andy Dougherty, Nov. 6, 2001 if $csh -c 'echo $version' >/dev/null 2>&1; then echo 'Your csh is really tcsh. Good.' else if xxx=`./UU/loc tcsh blurfl $pth`; $test -f "$xxx"; then echo "Found tcsh. I'll use it for globbing." # We can't change Configure's setting of $csh, due to the way # Configure handles $d_portable and commands found in $loclist. # We can set the value for CSH in config.h by setting full_csh. full_csh=$xxx elif [ -f "$csh" ]; then echo "Couldn't find tcsh. Csh-based globbing might be broken." fi fi # Shimpei Yamashita # Message-Id: <33EF1634.B36B6500@pobox.com> # # The DR2 of MkLinux (osname=linux,archname=ppc-linux) may need # special flags passed in order for dynamic loading to work. # instead of the recommended: # # ccdlflags='-rdynamic' # # it should be: # ccdlflags='-Wl,-E' # # So if your DR2 (DR3 came out summer 1998, consider upgrading) # has problems with dynamic loading, uncomment the # following three lines, make distclean, and re-Configure: #case "`uname -r | sed 's/^[0-9.-]*//'``arch`" in #'osfmach3ppc') ccdlflags='-Wl,-E' ;; #esac case "$uname_minus_m" in sparc*) case "$cccdlflags" in *-fpic*) cccdlflags="`echo $cccdlflags|sed 's/-fpic/-fPIC/'`" ;; *-fPIC*) ;; *) cccdlflags="$cccdlflags -fPIC" ;; esac ;; esac # SuSE8.2 has /usr/lib/libndbm* which are ld scripts rather than # true libraries. The scripts cause binding against static # version of -lgdbm which is a bad idea. So if we have 'nm' # make sure it can read the file # NI-S 2003/08/07 case "$nm" in '') ;; *) for p in $plibpth do if $test -r $p/libndbm.so; then if $nm $p/libndbm.so >/dev/null 2>&1 ; then echo 'Your shared -lndbm seems to be a real library.' _libndbm_real=1 break fi fi done if $test "X$_libndbm_real" = X; then echo 'Your shared -lndbm is not a real library.' set `echo X "$libswanted "| sed -e 's/ ndbm / /'` shift libswanted="$*" fi ;; esac # Linux on Synology. if [ -f /etc/synoinfo.conf -a -d /usr/syno ]; then # Tested on Synology DS213 and DS413 # OS version info in /etc.defaults/VERSION # http://forum.synology.com/wiki/index.php/What_kind_of_CPU_does_my_NAS_have # Synology DS213 running DSM 4.3-3810-0 (2013-11-06) # CPU model Marvell Kirkwood mv6282 ARMv5te # Linux 2.6.32.12 #3810 Wed Nov 6 05:13:41 CST 2013 armv5tel GNU/Linux # Synology DS413 running DSM 4.3-3810-0 (2013-11-06) # CPU model Freescale QorIQ P1022 ppc (e500v2) # linux 2.6.32.12 #3810 ppc GNU/Linux # All development stuff installed with ipkg is in /opt if [ "$LANG" = "" -o "$LANG" = "C" ]; then echo 'Your LANG is safe' else echo 'Please set $LANG to "C". All other $LANG settings will cause havoc' >&4 LANG=C fi echo 'Setting up to use /opt/*' >&4 locincpth="/opt/include $locincpth" libpth="/opt/lib $libpth" libspth="/opt/lib $libspth" loclibpth="/opt/lib $loclibpth" # POSIX will not link without the pthread lib libswanted="$libswanted pthread" echo "$libswanted" >&4 fi # This script UU/usethreads.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use threads. cat > UU/usethreads.cbu <<'EOCBU' case "$usethreads" in $define|true|[yY]*) ccflags="-D_REENTRANT -D_GNU_SOURCE $ccflags" if echo $libswanted | grep -v pthread >/dev/null then set `echo X "$libswanted "| sed -e 's/ c / pthread c /'` shift libswanted="$*" fi # Somehow at least in Debian 2.2 these manage to escape # the #define forest of and so that # the hasproto macro of Configure doesn't see these protos, # even with the -D_GNU_SOURCE. d_asctime_r_proto="$define" d_crypt_r_proto="$define" d_ctime_r_proto="$define" d_gmtime_r_proto="$define" d_localtime_r_proto="$define" d_random_r_proto="$define" ;; esac EOCBU cat > UU/uselargefiles.cbu <<'EOCBU' # This script UU/uselargefiles.cbu will get 'called-back' by Configure # after it has prompted the user for whether to use large files. case "$uselargefiles" in ''|$define|true|[yY]*) # Keep this in the left margin. ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64" ccflags="$ccflags $ccflags_uselargefiles" ;; esac EOCBU # Purify fails to link Perl if a "-lc" is passed into its linker # due to duplicate symbols. case "$PURIFY" in $define|true|[yY]*) set `echo X "$libswanted "| sed -e 's/ c / /'` shift libswanted="$*" ;; esac # If using g++, the Configure scan for dlopen() and (especially) # dlerror() might fail, easier just to forcibly hint them in. case "$cc" in *g++*) d_dlopen='define' d_dlerror='define' ;; esac # Under some circumstances libdb can get built in such a way as to # need pthread explicitly linked. libdb_needs_pthread="N" if echo " $libswanted " | grep -v " pthread " >/dev/null then if echo " $libswanted " | grep " db " >/dev/null then for DBDIR in $glibpth do DBLIB="$DBDIR/libdb.so" if [ -f $DBLIB ] then if ${nm:-nm} -u $DBLIB 2>/dev/null | grep pthread >/dev/null then if ldd $DBLIB | grep pthread >/dev/null then libdb_needs_pthread="N" else libdb_needs_pthread="Y" fi fi fi done fi fi case "$libdb_needs_pthread" in "Y") libswanted="$libswanted pthread" ;; esac