package CPAN;
use vars qw{$META $Signal $Cwd $End $Suppress_readline};

$VERSION = '1.08';

# $Id: CPAN.pm,v 1.92 1996/12/23 13:13:05 k Exp $

# my $version = substr q$Revision: 1.92 $, 10; # only used during development

BEGIN {require 5.003;}
require UNIVERSAL if $] == 5.003;

use Carp ();
use Config ();
use Cwd ();
use DirHandle;
use Exporter ();
use ExtUtils::MakeMaker ();
use File::Basename ();
use File::Copy ();
use File::Find;
use File::Path ();
use IO::File ();
use Safe ();
use Text::ParseWords ();

$Cwd = Cwd::cwd();

END { $End++; &cleanup; }

%CPAN::DEBUG = qw(
		  CPAN              1
		  Index             2
		  InfoObj           4
		  Author            8
		  Distribution     16
		  Bundle           32
		  Module           64
		  CacheMgr        128
		  Complete        256
		  FTP             512
		  Shell          1024
		  Eval           2048
		  Config         4096
		 );

$CPAN::DEBUG ||= 0;

package CPAN;
use vars qw($VERSION @EXPORT $AUTOLOAD $DEBUG $META);
use strict qw(vars);

@CPAN::ISA = qw(CPAN::Debug Exporter MY); # the MY class from
                                          # MakeMaker, gives us
                                          # catfile and catdir

$META ||= new CPAN;                 # In case we reeval ourselves we
                                    # need a ||

CPAN::Config->load;

@EXPORT = qw(autobundle bundle expand force install make recompile shell test clean);



#-> sub CPAN::autobundle ;
sub autobundle;
#-> sub CPAN::bundle ;
sub bundle;
#-> sub CPAN::expand ;
sub expand;
#-> sub CPAN::force ;
sub force;
#-> sub CPAN::install ;
sub install;
#-> sub CPAN::make ;
sub make;
#-> sub CPAN::shell ;
sub shell;
#-> sub CPAN::clean ;
sub clean;
#-> sub CPAN::test ;
sub test;

#-> sub CPAN::AUTOLOAD ;
sub AUTOLOAD {
    my($l) = $AUTOLOAD;
    $l =~ s/.*:://;
    my(%EXPORT);
    @EXPORT{@EXPORT} = '';
    if (exists $EXPORT{$l}){
	CPAN::Shell->$l(@_);
    } else {
	warn "CPAN doesn't know how to autoload $AUTOLOAD :-(
Nothing Done.
";
	CPAN::Shell->h;
    }
}

#-> sub CPAN::all ;
sub all {
    my($mgr,$class) = @_;
    CPAN->debug("mgr[$mgr] class[$class]") if $CPAN::DEBUG;
    CPAN::Index->reload;
    values %{ $META->{$class} };
}

# Called by shell, not in batch mode. Not clean XXX
#-> sub CPAN::checklock ;
sub checklock {
    my($self) = @_;
    my $lockfile = CPAN->catfile($CPAN::Config->{cpan_home},".lock");
    if (-f $lockfile && -M _ > 0) {
	my $fh = IO::File->new($lockfile);
	my $other = <$fh>;
	$fh->close;
	if (defined $other && $other) {
	    chomp $other;
	    return if $$==$other; # should never happen
	    print qq{There seems to be running another CPAN process ($other). Trying to contact...\n};
	    if (kill 0, $other) {
		Carp::croak qq{Other job is running.\n}.
		    qq{You may want to kill it and delete the lockfile, maybe. On UNIX try:\n}.
			qq{    kill $other\n}.
			    qq{    rm $lockfile\n};
	    } elsif (-w $lockfile) {
		my($ans)=
		    ExtUtils::MakeMaker::prompt
			(qq{Other job not responding. Shall I overwrite the lockfile? (Y/N)},"y");
		print("Ok, bye\n"), exit unless $ans =~ /^y/i;
	    } else {
		Carp::croak(
			    qq{Lockfile $lockfile not writeable by you. Cannot proceed.\n}.
			    qq{    On UNIX try:\n}.
			    qq{    rm $lockfile\n}.
			    qq{  and then rerun us.\n}
			   );
	    }
	}
    }
    File::Path::mkpath($CPAN::Config->{cpan_home});
    my $fh;
    unless ($fh = IO::File->new(">$lockfile")) {
	if ($! =~ /Permission/) {
	    my $incc = $INC{'CPAN/Config.pm'};
	    my $myincc = MY->catfile($ENV{HOME},'.cpan','CPAN','MyConfig.pm');
	    print qq{

Your configuration suggests that CPAN.pm should use a working
directory of
    $CPAN::Config->{cpan_home}
Unfortunately we could not create the lock file
    $lockfile
due to permission problems.

Please make sure that the configuration variable
    \$CPAN::Config->{cpan_home}
points to a directory where you can write a .lock file. You can set
this variable in either
    $incc
or
    $myincc

};
	}
	Carp::croak "Could not open >$lockfile: $!";
    }
    print $fh $$, "\n";
    $self->{LOCK} = $lockfile;
    $fh->close;
    $SIG{'TERM'} = sub { &cleanup; die "Got SIGTERM, leaving"; };
    $SIG{'INT'} = sub { &cleanup, die "Got a second SIGINT" if $Signal; $Signal = 1; };
    $SIG{'__DIE__'} = \&cleanup;
    print STDERR "Signal handler set.\n" unless $CPAN::Config->{'inhibit_startup_message'};
}

#-> sub CPAN::DESTROY ;
sub DESTROY {
    &cleanup; # need an eval?
}

#-> sub CPAN::exists ;
sub exists {
    my($mgr,$class,$id) = @_;
    CPAN::Index->reload;
    Carp::croak "exists called without class argument" unless $class;
    $id ||= "";
    exists $META->{$class}{$id};
}

#-> sub CPAN::hasFTP ;
sub hasFTP {
    my($self,$arg) = @_;
    if (defined $arg) {
	return $self->{'hasFTP'} = $arg;
    } elsif (not defined $self->{'hasFTP'}) {
	eval {require Net::FTP;};
	$self->{'hasFTP'} = $@ ? 0 : 1;
    }
    return $self->{'hasFTP'};
}

#-> sub CPAN::hasLWP ;
sub hasLWP {
    my($self,$arg) = @_;
    if (defined $arg) {
	return $self->{'hasLWP'} = $arg;
    } elsif (not defined $self->{'hasLWP'}) {
	eval {require LWP;};
	$LWP::VERSION ||= 0;
        $self->{'hasLWP'} = $LWP::VERSION >= 4.98;
    }
    return $self->{'hasLWP'};
}

#-> sub CPAN::hasMD5 ;
sub hasMD5 {
    my($self,$arg) = @_;
    if (defined $arg) {
	$self->{'hasMD5'} = $arg;
    } elsif (not defined $self->{'hasMD5'}) {
	eval {require MD5;};
	if ($@) {
	    print "MD5 security checks disabled because MD5 not installed. Please consider installing MD5\n";
	    $self->{'hasMD5'} = 0;
	} else {
	    $self->{'hasMD5'}++;
	}
    }
    return $self->{'hasMD5'};
}

#-> sub CPAN::instance ;
sub instance {
    my($mgr,$class,$id) = @_;
    CPAN::Index->reload;
    Carp::croak "instance called without class argument" unless $class;
    $id ||= "";
    $META->{$class}{$id} ||= $class->new(ID => $id );
}

#-> sub CPAN::new ;
sub new {
    bless {}, shift;
}

#-> sub CPAN::cleanup ;
sub cleanup {
    local $SIG{__DIE__} = '';
    my $i = 0; my $ineval = 0; my $sub;
    while ((undef,undef,undef,$sub) = caller(++$i)) {
      $ineval = 1, last if $sub eq '(eval)';
    }
    return if $ineval && !$End;
    return unless defined $META->{'LOCK'};
    return unless -f $META->{'LOCK'};
    unlink $META->{'LOCK'};
    print STDERR "Lockfile removed.\n";
#    my $mess = Carp::longmess(@_);
#    die @_;
}

#-> sub CPAN::shell ;
sub shell {
    $Suppress_readline ||= ! -t STDIN;

    my $prompt = "cpan> ";
    local($^W) = 1;
    my $term;
    unless ($Suppress_readline) {
	require Term::ReadLine;
	import Term::ReadLine;
	$term = new Term::ReadLine 'CPAN Monitor';
	$readline::rl_completion_function =
	    $readline::rl_completion_function = 'CPAN::Complete::complete';
    }

    no strict;
    $META->checklock();
    my $cwd = Cwd::cwd();
    # How should we determine if we have more than stub ReadLine enabled?
    my $rl_avail = $Suppress_readline ? "suppressed" :
	defined &Term::ReadLine::Perl::readline ? "enabled" :
	    "available (get Term::ReadKey and Term::ReadLine)";

    print qq{
cpan shell -- CPAN exploration and modules installation (v$CPAN::VERSION)
Readline support $rl_avail

} unless $CPAN::Config->{'inhibit_startup_message'} ;
    while () {
	if ($Suppress_readline) {
	    print $prompt;
	    last unless defined (chomp($_ = <>));
	} else {
	    last unless defined ($_ = $term->readline($prompt));
	}
	s/^\s//;
	next if /^$/;
	$_ = 'h' if $_ eq '?';
	if (/^\!/) {
	    s/^\!//;
	    my($eval) = $_;
	    package CPAN::Eval;
	    use vars qw($import_done);
	    CPAN->import(':DEFAULT') unless $import_done++;
	    CPAN->debug("eval[$eval]") if $CPAN::DEBUG;
	    eval($eval);
	    warn $@ if $@;
	} elsif (/^q(?:uit)?$/i) {
	    last;
	} elsif (/./) {
	    my(@line);
	    eval { @line = Text::ParseWords::shellwords($_) };
	    warn($@), next if $@;
	    $CPAN::META->debug("line[".join(":",@line)."]") if $CPAN::DEBUG;
	    my $command = shift @line;
	    eval { CPAN::Shell->$command(@line) };
	    warn $@ if $@;
	}
    } continue {
	&cleanup, die if $Signal;
	chdir $cwd;
	print "\n";
    }
}

package CPAN::Shell;
use vars qw($AUTOLOAD);
@CPAN::Shell::ISA = qw(CPAN::Debug);

# private function ro re-eval this module (handy during development)
#-> sub CPAN::Shell::AUTOLOAD ;
sub AUTOLOAD {
    warn "CPAN::Shell doesn't know how to autoload $AUTOLOAD :-(
Nothing Done.
";
	CPAN::Shell->h;
}

#-> sub CPAN::Shell::h ;
sub h {
    my($class,$about) = @_;
    if (defined $about) {
	print "Detailed help not yet implemented\n";
    } else {
	print q{
command   arguments       description
a         string                  authors
b         or              display bundles
d         /regex/         info    distributions
m         or              about   modules
i         none                    anything of above

r          as             reinstall recommendations
u          above          uninstalled distributions
See manpage for autobundle, recompile, force, etc.

make      modules,        make
test      dists, bundles, make test (implies make)
install   "r" or "u"      make install (implies test)
clean                     make clean

reload    index|cpan    load most recent indices/CPAN.pm
h or ?                  display this menu
o         various       set and query options
!         perl-code     eval a perl command
q                       quit the shell subroutine
};
    }
}

#-> sub CPAN::Shell::a ;
sub a { print shift->format_result('Author',@_);}
#-> sub CPAN::Shell::b ;
sub b {
    my($self,@which) = @_;
    my($incdir,$bdir,$dh); 
    foreach $incdir ($CPAN::Config->{'cpan_home'},@INC) {
	$bdir = $CPAN::META->catdir($incdir,"Bundle");
	if ($dh = DirHandle->new($bdir)) { # may fail
	    my($entry);
	    for $entry ($dh->read) {
		next if -d $CPAN::META->catdir($bdir,$entry);
		next unless $entry =~ s/\.pm$//;
		$CPAN::META->instance('CPAN::Bundle',"Bundle::$entry");
	    }
	}
    }
    print $self->format_result('Bundle',@which);
}
#-> sub CPAN::Shell::d ;
sub d { print shift->format_result('Distribution',@_);}
#-> sub CPAN::Shell::m ;
sub m { print shift->format_result('Module',@_);}

#-> sub CPAN::Shell::i ;
sub i {
    my($self) = shift;
    my(@args) = @_;
    my(@type,$type,@m);
    @type = qw/Author Bundle Distribution Module/;
    @args = '/./' unless @args;
    my(@result);
    for $type (@type) {
	push @result, $self->expand($type,@args);
    }
    my $result =  @result==1 ? $result[0]->as_string : join "", map {$_->as_glimpse} @result;
    $result ||= "No objects found of any type for argument @args\n";
    print $result;
}

#-> sub CPAN::Shell::o ;
sub o {
    my($self,$o_type,@o_what) = @_;
    $o_type ||= "";
    CPAN->debug("o_type[$o_type] o_what[".join(" | ",@o_what)."]\n");
    if ($o_type eq 'conf') {
	shift @o_what if @o_what && $o_what[0] eq 'help';
	if (!@o_what) {
	    my($k,$v);
	    print "CPAN::Config options:\n";
	    for $k (sort keys %CPAN::Config::can) {
		$v = $CPAN::Config::can{$k};
		printf "    %-18s %s\n", $k, $v;
	    }
	    print "\n";
	    for $k (sort keys %$CPAN::Config) {
		$v = $CPAN::Config->{$k};
		if (ref $v) {
		    printf "    %-18s\n", $k;
		    print map {"\t$_\n"} @{$v};
		} else {
		    printf "    %-18s %s\n", $k, $v;
		}
	    }
	    print "\n";
	} elsif (!CPAN::Config->edit(@o_what)) {
	    print qq[Type 'o conf' to view configuration edit options\n\n];
	}
    } elsif ($o_type eq 'debug') {
	my(%valid);
	@o_what = () if defined $o_what[0] && $o_what[0] =~ /help/i;
	if (@o_what) {
	    while (@o_what) {
		my($what) = shift @o_what;
		if ( exists $CPAN::DEBUG{$what} ) {
		    $CPAN::DEBUG |= $CPAN::DEBUG{$what};
		} elsif ($what =~ /^\d/) {
		    $CPAN::DEBUG = $what;
		} elsif (lc $what eq 'all') {
		    my($max) = 0;
		    for (values %CPAN::DEBUG) {
			$max += $_;
		    }
		    $CPAN::DEBUG = $max;
		} else {
		    for (keys %CPAN::DEBUG) {
			next unless lc($_) eq lc($what);
			$CPAN::DEBUG |= $CPAN::DEBUG{$_};
		    }
		    print "unknown argument $what\n";
		}
	    }
	} else {
	    print "Valid options for debug are ".join(", ",sort(keys %CPAN::DEBUG), 'all').
		" or a number. Completion works on the options. Case is ignored.\n\n";
	}
	if ($CPAN::DEBUG) {
	    print "Options set for debugging:\n";
	    my($k,$v);
	    for $k (sort {$CPAN::DEBUG{$a} <=> $CPAN::DEBUG{$b}} keys %CPAN::DEBUG) {
		$v = $CPAN::DEBUG{$k};
		printf "    %-14s(%s)\n", $k, $v if $v & $CPAN::DEBUG;
	    }
	} else {
	    print "Debugging turned off completely.\n";
	}
    } else {
	print qq{
Known options:
  conf    set or get configuration variables
  debug   set or get debugging options
};
    }
}

#-> sub CPAN::Shell::reload ;
sub reload {
    if ($_[1] =~ /cpan/i) {
	CPAN->debug("reloading the whole CPAN.pm") if $CPAN::DEBUG;
	my $fh = IO::File->new($INC{'CPAN.pm'});
	local $/;
	undef $/;
	eval <$fh>;
	warn $@ if $@;
    } elsif ($_[1] =~ /index/) {
	CPAN::Index->force_reload;
    }
}

#-> sub CPAN::Shell::_binary_extensions ;
sub _binary_extensions {
    my($self) = shift @_;
    my(@result,$module,%seen,%need,$headerdone);
    for $module ($self->expand('Module','/./')) {
	my $file  = $module->cpan_file;
	next if $file eq "N/A";
	next if $file =~ /^Contact Author/;
	next if $file =~ /perl5[._-]\d{3}(?:[\d_]+)?\.tar[._-]gz$/;
	next unless $module->xs_file;
	push @result, $module;
    }
#    print join " | ", @result;
#    print "\n";
    return @result;
}

#-> sub CPAN::Shell::recompile ;
sub recompile {
    my($self) = shift @_;
    my($module,@module,$cpan_file,%dist);
    @module = $self->_binary_extensions();
    for $module (@module){  # we force now and compile later, so we don't do it twice
	$cpan_file = $module->cpan_file;
	my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file);
	$pack->force;
	$dist{$cpan_file}++;
    }
    for $cpan_file (sort keys %dist) {
	print "  CPAN: Recompiling $cpan_file\n\n";
	my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file);
	$pack->install;
	$CPAN::Signal = 0; # it's tempting to reset Signal, so we can
                           # stop a package from recompiling,
                           # e.g. IO-1.12 when we have perl5.003_10
    }
}

#-> sub CPAN::Shell::_u_r_common ;
sub _u_r_common {
    my($self) = shift @_;
    my($what) = shift @_;
    CPAN->debug("self[$self] what[$what] args[@_]") if $CPAN::DEBUG;
    Carp::croak "Usage: \$obj->_u_r_common($what)" unless defined $what;
    Carp::croak "Usage: \$obj->_u_r_common(a|r|u)" unless $what =~ /^[aru]$/;
    my(@args) = @_;
    @args = '/./' unless @args;
    my(@result,$module,%seen,%need,$headerdone,$version_zeroes);
    $version_zeroes = 0;
    my $sprintf = "%-25s %9s %9s  %s\n";
    for $module ($self->expand('Module',@args)) {
	my $file  = $module->cpan_file;
	next unless defined $file; # ??
	my($latest) = $module->cpan_version || 0;
	my($inst_file) = $module->inst_file;
	my($have);
	if ($inst_file){
	    if ($what eq "a") {
		$have = $module->inst_version;
	    } elsif ($what eq "r") {
		$have = $module->inst_version;
		local($^W) = 0;
		$version_zeroes++ unless $have;
		next if $have >= $latest;
	    } elsif ($what eq "u") {
		next;
	    }
	} else {
	    if ($what eq "a") {
		next;
	    } elsif ($what eq "r") {
		next;
	    } elsif ($what eq "u") {
		$have = "-";
	    }
	}
	$seen{$file} ||= 0;
	if ($what eq "a") {
	    push @result, sprintf "%s %s\n", $module->id, $have;
	} elsif ($what eq "r") {
	    push @result, $module->id;
	    next if $seen{$file}++;
	} elsif ($what eq "u") {
	    push @result, $module->id;
	    next if $seen{$file}++;
	    next if $file =~ /^Contact/;
	}
	unless ($headerdone++){
	    print "\n";
	    printf $sprintf, "Package namespace", "installed", "latest", "in CPAN file";
	}
	$latest = substr($latest,0,8) if length($latest) > 8;
	$have = substr($have,0,8) if length($have) > 8;
	printf $sprintf, $module->id, $have, $latest, $file;
	$need{$module->id}++;
	return if $CPAN::Signal; # this is sometimes lengthy
    }
    unless (%need) {
	if ($what eq "u") {
	    print "No modules found for @args\n";
	} elsif ($what eq "r") {
	    print "All modules are up to date for @args\n";
	}
    }
    if ($what eq "r" && $version_zeroes) {
	my $s = $version_zeroes>1 ? "s have" : " has";
	print qq{$version_zeroes installed module$s no version number to compare\n};
    }
    @result;
}

#-> sub CPAN::Shell::r ;
sub r {
    shift->_u_r_common("r",@_);
}

#-> sub CPAN::Shell::u ;
sub u {
    shift->_u_r_common("u",@_);
}

#-> sub CPAN::Shell::autobundle ;
sub autobundle {
    my($self) = shift;
    my(@bundle) = $self->_u_r_common("a",@_);
    my($todir) = $CPAN::META->catdir($CPAN::Config->{'cpan_home'},"Bundle");
    File::Path::mkpath($todir);
    unless (-d $todir) {
	print "Couldn't mkdir $todir for some reason\n";
	return;
    }
    my($y,$m,$d) =  (localtime)[5,4,3];
    $y+=1900;
    $m++;
    my($c) = 0;
    my($me) = sprintf "Snapshot_%04d_%02d_%02d_%02d", $y, $m, $d, $c;
    my($to) = $CPAN::META->catfile($todir,"$me.pm");
    while (-f $to) {
	$me = sprintf "Snapshot_%04d_%02d_%02d_%02d", $y, $m, $d, ++$c;
	$to = $CPAN::META->catfile($todir,"$me.pm");
    }
    my($fh) = IO::File->new(">$to") or Carp::croak "Can't open >$to: $!";
    $fh->print(
	       "package Bundle::$me;\n\n",
	       "\$VERSION = '0.01';\n\n",
	       "1;\n\n",
	       "__END__\n\n",
	       "=head1 NAME\n\n",
	       "Bundle::$me - Snapshot of installation on ",
	       $Config::Config{'myhostname'},
	       " on ",
	       scalar(localtime),
	       "\n\n=head1 SYNOPSIS\n\n",
	       "perl -MCPAN -e 'install Bundle::$me'\n\n",
	       "=head1 CONTENTS\n\n",
	       join("\n", @bundle),
	       "\n\n=head1 CONFIGURATION\n\n",
	       Config->myconfig,
	       "\n\n=head1 AUTHOR\n\n",
	       "This Bundle has been generated automatically by the autobundle routine in CPAN.pm.\n",
	      );
    $fh->close;
    print "\nWrote bundle file
    $to\n\n";
}

#-> sub CPAN::Shell::expand ;
sub expand {
    shift;
    my($type,@args) = @_;
    my($arg,@m);
    for $arg (@args) {
	my $regex;
	if ($arg =~ m|^/(.*)/$|) {
	    $regex = $1;
	}
	my $class = "CPAN::$type";
	my $obj;
	if (defined $regex) {
	    for $obj ( sort {$a->id cmp $b->id} $CPAN::META->all($class)) {
		push @m, $obj if $obj->id =~ /$regex/i or $obj->can('name') && $obj->name  =~ /$regex/i;
	    }
	} else {
	    my($xarg) = $arg;
	    if ( $type eq 'Bundle' ) {
		$xarg =~ s/^(Bundle::)?(.*)/Bundle::$2/;
	    }
	    if ($CPAN::META->exists($class,$xarg)) {
		$obj = $CPAN::META->instance($class,$xarg);
	    } elsif ($obj = $CPAN::META->exists($class,$arg)) {
		$obj = $CPAN::META->instance($class,$arg);
	    } else {
		next;
	    }
	    push @m, $obj;
	}
    }
    return @m;
}

#-> sub CPAN::Shell::format_result ;
sub format_result {
    my($self) = shift;
    my($type,@args) = @_;
    @args = '/./' unless @args;
    my(@result) = $self->expand($type,@args);
    my $result =  @result==1 ? $result[0]->as_string : join "", map {$_->as_glimpse} @result;
    $result ||= "No objects of type $type found for argument @args\n";
    $result;
}

#-> sub CPAN::Shell::rematein ;
sub rematein {
    shift;
    my($meth,@some) = @_;
    my $pragma = "";
    if ($meth eq 'force') {
	$pragma = $meth;
	$meth = shift @some;
    }
    CPAN->debug("pragma[$pragma]meth[$meth] some[@some]") if $CPAN::DEBUG;
    my($s,@s);
    foreach $s (@some) {
	my $obj;
	if (ref $s) {
	    $obj = $s;
	} elsif ($s =~ m|/|) { # looks like a file
	    $obj = $CPAN::META->instance('CPAN::Distribution',$s);
	} elsif ($s =~ m|^Bundle::|) {
	    $obj = $CPAN::META->instance('CPAN::Bundle',$s);
	} else {
	    $obj = $CPAN::META->instance('CPAN::Module',$s) if $CPAN::META->exists('CPAN::Module',$s);
	}
	if (ref $obj) {
	    CPAN->debug(qq{pragma[$pragma] meth[$meth] obj[$obj] as_string\[}.$obj->as_string.qq{\]}) if $CPAN::DEBUG;
	    $obj->$pragma() if $pragma && $obj->can($pragma);
	    $obj->$meth();
	} else {
	    print "Warning: Cannot $meth $s, don't know what it is\n";
	}
    }
}

#-> sub CPAN::Shell::force ;
sub force   { shift->rematein('force',@_); }
#-> sub CPAN::Shell::readme ;
sub readme  { shift->rematein('readme',@_); }
#-> sub CPAN::Shell::make ;
sub make    { shift->rematein('make',@_); }
#-> sub CPAN::Shell::clean ;
sub clean   { shift->rematein('clean',@_); }
#-> sub CPAN::Shell::test ;
sub test    { shift->rematein('test',@_); }
#-> sub CPAN::Shell::install ;
sub install { shift->rematein('install',@_); }

package CPAN::FTP;
use vars qw($Ua);
@CPAN::FTP::ISA = qw(CPAN::Debug);

#-> sub CPAN::FTP::ftp_get ;
sub ftp_get {
    my($class,$host,$dir,$file,$target) = @_;
    $class->debug(
		       qq[Going to fetch file [$file] from dir [$dir]
	on host [$host] as local [$target]\n]
		      ) if $CPAN::DEBUG;
    my $ftp = Net::FTP->new($host);
    $ftp->debug(1) if $CPAN::DEBUG{'FTP'} & $CPAN::DEBUG;
    $class->debug(qq[Going to ->login("anonymous","$Config::Config{'cf_email'}")\n]);
    unless ( $ftp->login("anonymous",$Config::Config{'cf_email'}) ){
	warn "Couldn't login on $host";
	return;
    }
    # print qq[Going to ->cwd("$dir")\n];
    unless ( $ftp->cwd($dir) ){
	warn "Couldn't cwd $dir";
	return;
    }
    $ftp->binary;
    $class->debug(qq[Going to ->get("$file","$target")\n]) if $CPAN::DEBUG;
    unless ( $ftp->get($file,$target) ){
	warn "Couldn't fetch $file from $host";
	return;
    }
    $ftp->quit;
}

#-> sub CPAN::FTP::localize ;
sub localize {
    my($self,$file,$aslocal,$force) = @_;
    $force ||= 0;
    Carp::croak "Usage: ->localize(cpan_file,as_local_file[,$force])" unless defined $aslocal;
    $self->debug("file [$file] aslocal [$aslocal]") if $CPAN::DEBUG;

    return $aslocal if -f $aslocal && -r _ && ! $force;

    my($aslocal_dir) = File::Basename::dirname($aslocal);
    File::Path::mkpath($aslocal_dir);
    print STDERR qq{Warning: You are not allowed to write into directory "$aslocal_dir".
    I\'ll continue, but if you face any problems, they may be due
    to insufficient permissions.\n} unless -w $aslocal_dir;

    # Inheritance is not easier to manage than a few if/else branches
    if ($CPAN::META->hasLWP) {
	require LWP::UserAgent;
 	unless ($Ua) {
	    $Ua = new LWP::UserAgent;
	    $Ua->proxy('ftp',  $ENV{'ftp_proxy'})  if defined $ENV{'ftp_proxy'};
	    $Ua->proxy('http', $ENV{'http_proxy'}) if defined $ENV{'http_proxy'};
	    $Ua->no_proxy($ENV{'no_proxy'})        if defined $ENV{'no_proxy'};
	}
    }

    # Try the list of urls for each single object. We keep a record
    # where we did get a file from
    for (0..$#{$CPAN::Config->{urllist}}) {
	my $url = $CPAN::Config->{urllist}[$_];
	$url .= "/" unless substr($url,-1) eq "/";
	$url .= $file;
	$self->debug("localizing[$url]") if $CPAN::DEBUG;
	if ($url =~ /^file:/) {
	    my $l;
	    if ($CPAN::META->hasLWP) {
		require URI::URL;
		my $u = new URI::URL $url;
		$l = $u->path;
	    } else { # works only on Unix, is poorly constructed, but
                     # hopefully better than nothing. 
		     # RFC 1738 says fileurl BNF is
		     # fileurl = "file://" [ host | "localhost" ] "/" fpath
		     # Thanks to "Mark D. Baushke" <mdb@cisco.com> for the code
		($l = $url) =~ s,^file://[^/]+,,; # discard the host part
		$l =~ s/^file://;	# assume they meant file://localhost
	    }
	    return $l if -f $l && -r _;
	}

	if ($CPAN::META->hasLWP) {
	    print "Fetching $url\n";
	    my $res = $Ua->mirror($url, $aslocal);
	    if ($res->is_success) {
		return $aslocal;
	    }
	}
	if ($url =~ m|^ftp://(.*?)/(.*)/(.*)|) {
	    my($host,$dir,$getfile) = ($1,$2,$3);
	    if ($CPAN::META->hasFTP) {
		$dir =~ s|/+|/|g;
		$self->debug("Going to fetch file [$getfile]
  from dir [$dir]
  on host  [$host]
  as local [$aslocal]") if $CPAN::DEBUG;
		CPAN::FTP->ftp_get($host,$dir,$getfile,$aslocal) && return $aslocal;
	    } elsif (-x $CPAN::Config->{'ftp'}) {
		my($netrc) = CPAN::FTP::netrc->new;
		if ($netrc->contains($host)) {
		    print(
			  qq{
  Trying with external ftp to get $url
  As this requires some features that are not thoroughly tested, we\'re
  not sure, that we get it right. Please, install Net::FTP as soon
  as possible. Just type "install Net::FTP". Thank you.

}
			 );
		    local(*WTR);
		    my($cwd) = Cwd::cwd();
		    chdir $aslocal_dir;
		    my($targetfile) = File::Basename::basename($aslocal);
		    my(@dialog);
		    push @dialog, map {"cd $_\n"} split "/", $dir;
		    push @dialog, "get $getfile $targetfile\n";
		    push @dialog, "quit\n";
		    open(WTR, "|$CPAN::Config->{'ftp'} $host") or die "Couldn't open ftp: $!";
		    # pilot blind
		    for (@dialog) {
#			print "To WTR>>$_<<\n";
			print WTR $_;
		    }
#		    close WTR;
		    chdir($cwd);
		    return $aslocal;
		} else {
		    my($netrcfile) = $netrc->{netrc};
		    if ($netrcfile) {
			print qq{  Your $netrcfile does not contain host $host.\n}
		    } else {
			print qq{  I could not find or open your $netrcfile.\n}
		    }
		    print qq{  If you want to use external ftp,
  please enter host $host into your .netrc file and retry.

  The format of a proper entry in your .netrc file would be:

machine $host
login ftp
password $Config::Config{cf_email}

Please make also sure, your .netrc will not be readable by others.
You don\'t have to leave and restart CPAN.pm, I\'ll look again next
time I come around here.
\n};
		}
	    }
	}
	if (-x $CPAN::Config->{'lynx'}) {
##	    $self->debug("Trying with lynx for [$url]") if $CPAN::DEBUG;
	    my($want_compressed);
	    print(
		  qq{
  Trying with lynx to get $url
  As lynx has so many options and versions, we\'re not sure, that we
  get it right. It is recommended that you install Net::FTP as soon
  as possible. Just type "install Net::FTP". Thank you.

}
		 );
	    $want_compressed = $aslocal =~ s/\.gz//;
	    my($system) = "$CPAN::Config->{'lynx'} -source '$url' > $aslocal";
	    if (system($system)==0) {
		if ($want_compressed) {
		    $system = "$CPAN::Config->{'gzip'} -dt $aslocal";
		    if (system($system)==0) {
			rename $aslocal, "$aslocal.gz";
		    } else {
			$system = "$CPAN::Config->{'gzip'} $aslocal";
			system($system);
		    }
		    return "$aslocal.gz";
		} else {
		    $system = "$CPAN::Config->{'gzip'} -dt $aslocal";
		    if (system($system)==0) {
			$system = "$CPAN::Config->{'gzip'} -d $aslocal";
			system($system);
		    } else {
			# should be fine, eh?
		    }
		    return $aslocal;
		}
	    }
	}
	warn "Can't access URL $url.
  Either get LWP or Net::FTP
  or an external lynx or ftp";
    }
    Carp::croak("Cannot fetch $file from anywhere");
}

package CPAN::FTP::external;

package CPAN::FTP::netrc;

sub new {
    my($class) = @_;
    my $file = MY->catfile($ENV{HOME},".netrc");
    my($fh,@machines);
    if($fh = IO::File->new($file,"r")){
	local($/) = "";
	while (<$fh>) {
	    next if /\bmacdef\b/;
	    my($machine) = /\bmachine\s+(\S+)/s;
	    push @machines, $machine;
	}
    } else {
	$file = "";
    }
    bless {
	   mach => [@machines],
	   netrc => $file,
	  }, $class;
}

sub contains {
    my($self,$mach) = @_;
    scalar grep {$_ eq $mach} @{$self->{mach}};
}

package CPAN::Complete;
@CPAN::Complete::ISA = qw(CPAN::Debug);

#-> sub CPAN::Complete::complete ;
sub complete {
    my($word,$line,$pos) = @_;
    $word ||= "";
    $line ||= "";
    $pos ||= 0;
    CPAN->debug("word [$word] line[$line] pos[$pos]") if $CPAN::DEBUG;
    $line =~ s/^\s*//;
    my @return;
    if ($pos == 0) {
	@return = grep(/^$word/, sort qw(! a b d h i m o q r u autobundle clean make test install reload));
    } elsif ( $line !~ /^[\!abdhimorut]/ ) {
	@return = ();
    } elsif ($line =~ /^a\s/) {
	@return = completex('CPAN::Author',$word);
    } elsif ($line =~ /^b\s/) {
	@return = completex('CPAN::Bundle',$word);
    } elsif ($line =~ /^d\s/) {
	@return = completex('CPAN::Distribution',$word);
    } elsif ($line =~ /^([mru]\s|(make|clean|test|install)\s)/ ) {
	@return = (completex('CPAN::Module',$word),completex('CPAN::Bundle',$word));
    } elsif ($line =~ /^i\s/) {
	@return = complete_any($word);
    } elsif ($line =~ /^reload\s/) {
	@return = complete_reload($word,$line,$pos);
    } elsif ($line =~ /^o\s/) {
	@return = complete_option($word,$line,$pos);
    } else {
	@return = ();
    }
    return @return;
}

#-> sub CPAN::Complete::completex ;
sub completex {
    my($class, $word) = @_;
    grep /^\Q$word\E/, map { $_->id } $CPAN::META->all($class);
}

#-> sub CPAN::Complete::complete_any ;
sub complete_any {
    my($word) = shift;
    return (
	    completex('CPAN::Author',$word),
	    completex('CPAN::Bundle',$word),
	    completex('CPAN::Distribution',$word),
	    completex('CPAN::Module',$word),
	   );
}

#-> sub CPAN::Complete::complete_reload ;
sub complete_reload {
    my($word,$line,$pos) = @_;
    $word ||= "";
    my(@words) = split " ", $line;
    CPAN->debug("word[$word] line[$line] pos[$pos]") if $CPAN::DEBUG;
    my(@ok) = qw(cpan index);
    return @ok if @words==1;
    return grep /^\Q$word\E/, @ok if @words==2 && $word;
}

#-> sub CPAN::Complete::complete_option ;
sub complete_option {
    my($word,$line,$pos) = @_;
    $word ||= "";
    my(@words) = split " ", $line;
    CPAN->debug("word[$word] line[$line] pos[$pos]") if $CPAN::DEBUG;
    my(@ok) = qw(conf debug);
    return @ok if @words==1;
    return grep /^\Q$word\E/, @ok if @words==2 && $word;
    if (0) {
    } elsif ($words[1] eq 'index') {
	return ();
    } elsif ($words[1] eq 'conf') {
	return CPAN::Config::complete(@_);
    } elsif ($words[1] eq 'debug') {
	return sort grep /^\Q$word\E/, sort keys %CPAN::DEBUG, 'all';
    }
}

package CPAN::Index;
use vars qw($last_time);
@CPAN::Index::ISA = qw(CPAN::Debug);
$last_time ||= 0;

#-> sub CPAN::Index::force_reload ;
sub force_reload {
    my($class) = @_;
    $CPAN::Index::last_time = 0;
    $class->reload(1);
}

#-> sub CPAN::Index::reload ;
sub reload {
    my($cl,$force) = @_;
    my $time = time;

    # XXX check if a newer one is available. (We currently read it from time to time)
    return if $last_time + $CPAN::Config->{index_expire}*86400 > $time;
    $last_time = $time;

    $cl->read_authindex($cl->reload_x("authors/01mailrc.txt.gz","01mailrc.gz",$force));
    return if $CPAN::Signal; # this is sometimes lengthy
    $cl->read_modpacks($cl->reload_x("modules/02packages.details.txt.gz","02packag.gz",$force));
    return if $CPAN::Signal; # this is sometimes lengthy
    $cl->read_modlist($cl->reload_x("modules/03modlist.data.gz","03mlist.gz",$force));
}

#-> sub CPAN::Index::reload_x ;
sub reload_x {
    my($cl,$wanted,$localname,$force) = @_;
    $force ||= 0;
    my $abs_wanted = CPAN->catfile($CPAN::Config->{'keep_source_where'},$localname);
    if (-f $abs_wanted && -M $abs_wanted < $CPAN::Config->{'index_expire'} && !$force) {
	my($s) = $CPAN::Config->{'index_expire'} != 1;
	$cl->debug(qq{$abs_wanted younger than $CPAN::Config->{'index_expire'} day$s. I\'ll use that.\n});
	return $abs_wanted;
    } else {
	$force ||= 1;
    }
    return CPAN::FTP->localize($wanted,$abs_wanted,$force);
}

#-> sub CPAN::Index::read_authindex ;
sub read_authindex {
    my($cl,$index_target) = @_;
    my $pipe = "$CPAN::Config->{gzip} --decompress --stdout $index_target";
    warn "Going to read $index_target\n";
    my $fh = IO::File->new("$pipe|");
    while (<$fh>) {
	chomp;
	my($userid,$fullname,$email) = /alias\s+(\S+)\s+\"([^\"\<]+)\s+<([^\>]+)\>\"/;
	next unless $userid && $fullname && $email;

	# instantiate an author object
 	my $userobj = $CPAN::META->instance('CPAN::Author',$userid);
	$userobj->set('FULLNAME' => $fullname, 'EMAIL' => $email);
	return if $CPAN::Signal;
    }
    $fh->close;
    $? and Carp::croak "FAILED $pipe: exit status [$?]";
}

#-> sub CPAN::Index::read_modpacks ;
sub read_modpacks {
    my($cl,$index_target) = @_;
    my $pipe = "$CPAN::Config->{gzip} --decompress --stdout $index_target";
    warn "Going to read $index_target\n";
    my $fh = IO::File->new("$pipe|");
    while (<$fh>) {
	next if 1../^\s*$/;
	chomp;
	my($mod,$version,$dist) = split;
	$version =~ s/^\+//;

	# if it as a bundle, instatiate a bundle object
	my($bundle);
	if ($mod =~ /^Bundle::(.*)/) {
	    $bundle = $1;
	}

	if ($mod eq 'CPAN') {
	    local($^W)=0;
	    if ($version > $CPAN::VERSION){
		print qq{
  Hey, you know what? There\'s a new CPAN.pm version (v$version)
  available! I\'d suggest--provided you have time--you try
    install CPAN
    reload cpan
  without quitting the current session. It should be a seemless upgrade
  while we are running...
};
		sleep 2;
		print qq{\n};
	    }
	}

	my($id);
	if ($bundle){
	    $id =  $CPAN::META->instance('CPAN::Bundle',$mod);
	    $id->set('CPAN_VERSION' => $version, 'CPAN_FILE' => $dist);
# This "next" makes us faster but if the job is running long, we ignore
# rereads which is bad. So we have to be a bit slower again.
#	} elsif ($CPAN::META->exists('CPAN::Module',$mod)) {
#	    next;
	} else {
	    # instantiate a module object
	    $id = $CPAN::META->instance('CPAN::Module',$mod);
	    $id->set('CPAN_VERSION' => $version, 'CPAN_FILE' => $dist);
	}

	# determine the author
	my($userid) = $dist =~ /([^\/]+)/;
	$id->set('CPAN_USERID' => $userid) if $userid =~ /\w/;

	# instantiate a distribution object
	unless ($CPAN::META->exists('CPAN::Distribution',$dist)) {
	    $CPAN::META->instance(
				  'CPAN::Distribution' => $dist
				 )->set(
					'CPAN_USERID' => $userid
				       )
				     if $userid =~ /\w/;
	}

	return if $CPAN::Signal;
    }
    $fh->close;
    $? and Carp::croak "FAILED $pipe: exit status [$?]";
}

#-> sub CPAN::Index::read_modlist ;
sub read_modlist {
    my($cl,$index_target) = @_;
    my $pipe = "$CPAN::Config->{gzip} --decompress --stdout $index_target";
    warn "Going to read $index_target\n";
    my $fh = IO::File->new("$pipe|");
    my $eval = "";
    while (<$fh>) {
	next if 1../^\s*$/;
	next if /use vars/; # will go away in 03...
	$eval .= $_;
	return if $CPAN::Signal;
    }
    $eval .= q{CPAN::Modulelist->data;};
    local($^W) = 0;
    my($comp) = Safe->new("CPAN::Safe1");
    my $ret = $comp->reval($eval);
    Carp::confess($@) if $@;
    return if $CPAN::Signal;
    for (keys %$ret) {
	my $obj = $CPAN::META->instance(CPAN::Module,$_);
	$obj->set(%{$ret->{$_}});
	return if $CPAN::Signal;
    }
}

package CPAN::InfoObj;
@CPAN::InfoObj::ISA = qw(CPAN::Debug);

#-> sub CPAN::InfoObj::new ;
sub new { my $this = bless {}, shift; %$this = @_; $this }

#-> sub CPAN::InfoObj::set ;
sub set {
    my($self,%att) = @_;
    my(%oldatt) = %$self;
    %$self = (%oldatt, %att);
}

#-> sub CPAN::InfoObj::id ;
sub id { shift->{'ID'} }

#-> sub CPAN::InfoObj::as_glimpse ;
sub as_glimpse {
    my($self) = @_;
    my(@m);
    my $class = ref($self);
    $class =~ s/^CPAN:://;
    push @m, sprintf "%-15s %s\n", $class, $self->{ID};
    join "", @m;
}

#-> sub CPAN::InfoObj::as_string ;
sub as_string {
    my($self) = @_;
    my(@m);
    my $class = ref($self);
    $class =~ s/^CPAN:://;
    push @m, $class, " id = $self->{ID}\n";
    for (sort keys %$self) {
	next if $_ eq 'ID';
	my $extra = "";
	$_ eq "CPAN_USERID" and $extra = " (".$self->author.")";
	if (ref $self->{$_}) { # Should we setup a language interface? XXX
	    push @m, sprintf "    %-12s %s%s\n", $_, "@{$self->{$_}}", $extra;
	} else {
	    push @m, sprintf "    %-12s %s%s\n", $_, $self->{$_}, $extra;
	}
    }
    join "", @m, "\n";
}

#-> sub CPAN::InfoObj::author ;
sub author {
    my($self) = @_;
    $CPAN::META->instance(CPAN::Author,$self->{CPAN_USERID})->fullname;
}

package CPAN::Author;
@CPAN::Author::ISA = qw(CPAN::Debug CPAN::InfoObj);

#-> sub CPAN::Author::as_glimpse ;
sub as_glimpse {
    my($self) = @_;
    my(@m);
    my $class = ref($self);
    $class =~ s/^CPAN:://;
    push @m, sprintf "%-15s %s (%s)\n", $class, $self->{ID}, $self->fullname;
    join "", @m;
}

# Dead code, I would have liked to have,,, but it was never reached,,,
#sub make {
#    my($self) = @_;
#    return "Don't be silly, you can't make $self->{FULLNAME} ;-)\n";
#}

#-> sub CPAN::Author::fullname ;
sub fullname { shift->{'FULLNAME'} }
*name = \&fullname;
#-> sub CPAN::Author::email ;
sub email    { shift->{'EMAIL'} }

package CPAN::Distribution;
@CPAN::Distribution::ISA = qw(CPAN::Debug CPAN::InfoObj);

#-> sub CPAN::Distribution::called_for ;
sub called_for {
    my($self,$id) = @_;
    $self->{'CALLED_FOR'} = $id if defined $id;
    return $self->{'CALLED_FOR'};
}

#-> sub CPAN::Distribution::get ;
sub get {
    my($self) = @_;
  EXCUSE: {
	my @e;
	exists $self->{'build_dir'} and push @e, "Unwrapped into directory $self->{'build_dir'}";
	print join "", map {"  $_\n"} @e and return if @e;
    }
    my($local_file);
    my($local_wanted) =
	 CPAN->catfile(
			$CPAN::Config->{keep_source_where},
			"authors",
			"id",
			split("/",$self->{ID})
		       );

    $self->debug("Doing localize") if $CPAN::DEBUG;
    $local_file = CPAN::FTP->localize("authors/id/$self->{ID}", $local_wanted);
    $self->{localfile} = $local_file;
    my $builddir = $CPAN::META->{cachemgr}->dir;
    $self->debug("doing chdir $builddir") if $CPAN::DEBUG;
    chdir $builddir or Carp::croak("Couldn't chdir $builddir: $!");
    my $packagedir;

    $self->debug("local_file[$local_file]") if $CPAN::DEBUG;
    if ($local_file =~ /(\.tar\.(gz|Z)|\.tgz|\.zip)$/i){
	$self->debug("Removing tmp") if $CPAN::DEBUG;
	File::Path::rmtree("tmp");
	mkdir "tmp", 0777 or Carp::croak "Couldn't mkdir tmp: $!";
	chdir "tmp";
	$self->debug("Changed directory to tmp") if $CPAN::DEBUG;
	if ($local_file =~ /z$/i){
	    $self->{archived} = "tar";
	    if (system("$CPAN::Config->{gzip} --decompress --stdout $local_file | $CPAN::Config->{tar} xvf -")==0) {
		$self->{unwrapped} = "YES";
	    } else {
		$self->{unwrapped} = "NO";
	    }
	} elsif ($local_file =~ /zip$/i) {
	    $self->{archived} = "zip";
	    if (system("$CPAN::Config->{unzip} $local_file")==0) {
		$self->{unwrapped} = "YES";
	    } else {
		$self->{unwrapped} = "NO";
	    }
	}
	# Let's check if the package has its own directory.
	opendir DIR, "." or Carp::croak("Weird: couldn't opendir .: $!");
	my @readdir = grep $_ !~ /^\.\.?$/, readdir DIR; ### MAC??
	closedir DIR;
	my ($distdir,$packagedir);
	if (@readdir == 1 && -d $readdir[0]) {
	    $distdir = $readdir[0];
	    $packagedir = $CPAN::META->catdir($builddir,$distdir);
	    -d $packagedir and print "Removing previously used $packagedir\n";
	    File::Path::rmtree($packagedir);
	    rename($distdir,$packagedir) or Carp::confess("Couldn't rename $distdir to $packagedir: $!");
	} else {
	    my $pragmatic_dir = $self->{'CPAN_USERID'} . '000';
	    $pragmatic_dir =~ s/\W_//g;
	    $pragmatic_dir++ while -d "../$pragmatic_dir";
	    $packagedir = $CPAN::META->catdir($builddir,$pragmatic_dir);
	    File::Path::mkpath($packagedir);
	    my($f);
	    for $f (@readdir) { # is already without "." and ".."
		my $to = $CPAN::META->catdir($packagedir,$f);
		rename($f,$to) or Carp::confess("Couldn't rename $f to $to: $!");
	    }
	}
	$self->{'build_dir'} = $packagedir;

	chdir "..";
	$self->debug("Changed directory to .. (self is $self [".$self->as_string."])") if $CPAN::DEBUG;
	File::Path::rmtree("tmp");
	if ($CPAN::Config->{keep_source_where} =~ /^no/i ){
	    print "Going to unlink $local_file\n";
	    unlink $local_file or Carp::carp "Couldn't unlink $local_file";
	}
	my($makefilepl) = $CPAN::META->catfile($packagedir,"Makefile.PL");
	unless (-f $makefilepl) {
	    my($configure) = $CPAN::META->catfile($packagedir,"Configure");
	    if (-f $configure) {
		# do we have anything to do?
		$self->{'configure'} = $configure;
	    } else {
		my $fh = IO::File->new(">$makefilepl") or Carp::croak("Could not open >$makefilepl");
		my $cf = $self->called_for || "unknown";
		$fh->print(qq{
# This Makefile.PL has been autogenerated by the module CPAN.pm
# Autogenerated on: }.scalar localtime().qq{
		    use ExtUtils::MakeMaker;
		    WriteMakefile(NAME => q[$cf]);
});
		print qq{Package comes without Makefile.PL.\n}.
		    qq{  Writing one on our own (calling it $cf)\n};
	    }
	}
    } else {
	$self->{archived} = "NO";
    }
    return $self;
}

#-> sub CPAN::Distribution::new ;
sub new {
    my($class,%att) = @_;

    $CPAN::META->{cachemgr} ||= CPAN::CacheMgr->new();

    my $this = { %att };
    return bless $this, $class;
}

#-> sub CPAN::Distribution::readme ;
sub readme {
    my($self) = @_;
    print "Readme not yet implemented (says ".$self->id.")\n";
}

#-> sub CPAN::Distribution::verifyMD5 ;
sub verifyMD5 {
    my($self) = @_;
  EXCUSE: {
	my @e;
	$self->{MD5_STATUS} and push @e, "MD5 Checksum was ok";
	print join "", map {"  $_\n"} @e and return if @e;
    }
    my($local_file);
    my(@local) = split("/",$self->{ID});
    my($basename) = pop @local;
    push @local, "CHECKSUMS";
    my($local_wanted) =
	CPAN->catfile(
		      $CPAN::Config->{keep_source_where},
		      "authors",
		      "id",
		      @local
		     );
    local($") = "/";
    if (
	-f $local_wanted
	&&
	$self->MD5_check_file($local_wanted,$basename)
       ) {
	return $self->{MD5_STATUS}="OK";
    }
    $local_file = CPAN::FTP->localize("authors/id/@local", $local_wanted, 'force>:-{');
    my($checksum_pipe);
    if ($local_file) {
	# fine
    } else {
	$local[-1] .= ".gz";
	$local_file = CPAN::FTP->localize(
					  "authors/id/@local",
					  "$local_wanted.gz",
					  'force>:-{'
					 );
	my $system = "$CPAN::Config->{gzip} --decompress $local_file";
	system($system)==0 or die "Could not uncompress $local_file";
	$local_file =~ s/\.gz$//;
    }
    $self->MD5_check_file($local_file,$basename);
}

#-> sub CPAN::Distribution::MD5_check_file ;
sub MD5_check_file {
    my($self,$lfile,$basename) = @_;
    my($cksum);
    my $fh = new IO::File;
    local($/)=undef;
    if (open $fh, $lfile){
	my $eval = <$fh>;
	close $fh;
	my($comp) = Safe->new();
	$cksum = $comp->reval($eval);
	Carp::confess($@) if $@;
	if ($cksum->{$basename}->{md5}) {
	    $self->debug("Found checksum for $basename: $cksum->{$basename}->{md5}\n") if $CPAN::DEBUG;
	    my $file = $self->{localfile};
	    my $pipe = "$CPAN::Config->{gzip} --decompress --stdout $self->{localfile}|";
	    if (
		open($fh, $file) && $self->eq_MD5($fh,$cksum->{$basename}->{md5})
		or
		open($fh, $pipe) && $self->eq_MD5($fh,$cksum->{$basename}->{'md5-ungz'})
	       ){
		print "Checksum for $file ok\n";
		return $self->{MD5_STATUS}="OK";
	    } else {
		die join(
			 "",
			 "\nChecksum mismatch for distribution file. Please investigate.\n\n",
			 $self->as_string,
			 $CPAN::META->instance('CPAN::Author',$self->{CPAN_USERID})->as_string,
			 "Please contact the author or your CPAN site admin"
			);
	    }
	    close $fh if fileno($fh);
	} else {
	    print "No md5 checksum for $basename in local $lfile\n";
	    return;
	}
    } else {
	Carp::carp "Could not open $lfile for reading";
    }
}

#-> sub CPAN::Distribution::eq_MD5 ;
sub eq_MD5 {
    my($self,$fh,$expectMD5) = @_;
    my $md5 = new MD5;
    $md5->addfile($fh);
    my $hexdigest = $md5->hexdigest;
    $hexdigest eq $expectMD5;
}

#-> sub CPAN::Distribution::force ;
sub force {
    my($self) = @_;
    $self->{'force_update'}++;
    delete $self->{'MD5_STATUS'};
    delete $self->{'archived'};
    delete $self->{'build_dir'};
    delete $self->{'localfile'};
    delete $self->{'make'};
    delete $self->{'install'};
    delete $self->{'unwrapped'};
    delete $self->{'writemakefile'};
}

#-> sub CPAN::Distribution::make ;
sub make {
    my($self) = @_;
    $self->debug($self->id) if $CPAN::DEBUG;
    print "Running make\n";
    $self->get;
    if ($CPAN::META->hasMD5) {
	$self->verifyMD5;
    }
    EXCUSE: {
	  my @e;
	  $self->{archived} eq "NO" and push @e, "Is neither a tar nor a zip archive.";
	  $self->{unwrapped} eq "NO"   and push @e, "had problems unarchiving. Please build manually";
	  exists $self->{writemakefile} && $self->{writemakefile} eq "NO" and push @e, "Had some problem writing Makefile";
	  defined $self->{'make'} and push @e, "Has already been processed within this session";
	  print join "", map {"  $_\n"} @e and return if @e;
     }
    print "\n  CPAN: Going to build ".$self->id."\n\n";
    my $builddir = $self->dir;
    chdir $builddir or Carp::croak("Couldn't chdir $builddir: $!");
    $self->debug("Changed directory to $builddir") if $CPAN::DEBUG;

    my $system;
    if ($self->{'configure'}) {
	$system = $self->{'configure'};
    } else {
	my($perl) = $^X =~ /^\.\// ? "$CPAN::Cwd/$^X" : $^X; # XXX subclassing folks, forgive me!
	$system = "$perl Makefile.PL $CPAN::Config->{makepl_arg}";
    }
    $SIG{ALRM} = sub { die "inactivity_timeout reached\n" };
    my($ret,$pid);
    $@ = "";
    if ($CPAN::Config->{inactivity_timeout}) {
	eval {
	    alarm $CPAN::Config->{inactivity_timeout};
	    #$SIG{CHLD} = \&REAPER;
	    if (defined($pid=fork)) {
		if ($pid) { #parent
		    wait;
		} else {    #child
		    exec $system;
		}
	    } else {
		print "Cannot fork: $!";
		return;
	    }
	    $ret = system($system);
	};
	alarm 0;
    } else {
	$ret = system($system);
    }
    if ($@){
	kill 9, $pid;
	waitpid $pid, 0;
	print $@;
	$self->{writemakefile} = "NO - $@";
	$@ = "";
	return;
    } elsif ($ret != 0) {
	 $self->{writemakefile} = "NO";
	 return;
    }
    $self->{writemakefile} = "YES";
    return if $CPAN::Signal;
    $system = join " ", $CPAN::Config->{'make'}, $CPAN::Config->{make_arg};
    if (system($system)==0) {
	 print "  $system -- OK\n";
	 $self->{'make'} = "YES";
    } else {
	 $self->{writemakefile} = "YES";
	 $self->{'make'} = "NO";
	 print "  $system -- NOT OK\n";
    }
}

#-> sub CPAN::Distribution::test ;
sub test {
    my($self) = @_;
    $self->make;
    return if $CPAN::Signal;
    print "Running make test\n";
    EXCUSE: {
	  my @e;
	  exists $self->{'make'} or push @e, "Make had some problems, maybe interrupted? Won't test";
	  exists $self->{'make'} and $self->{'make'} eq 'NO' and push @e, "Oops, make had returned bad status";
	  exists $self->{'build_dir'} or push @e, "Has no own directory";
	  print join "", map {"  $_\n"} @e and return if @e;
     }
    chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}");
    $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG;
    my $system = join " ", $CPAN::Config->{'make'}, "test";
    if (system($system)==0) {
	 print "  $system -- OK\n";
	 $self->{'make_test'} = "YES";
    } else {
	 $self->{'make_test'} = "NO";
	 print "  $system -- NOT OK\n";
    }
}

#-> sub CPAN::Distribution::clean ;
sub clean {
    my($self) = @_;
    print "Running make clean\n";
    EXCUSE: {
	  my @e;
	  exists $self->{'build_dir'} or push @e, "Has no own directory";
	  print join "", map {"  $_\n"} @e and return if @e;
     }
    chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}");
    $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG;
    my $system = join " ", $CPAN::Config->{'make'}, "clean";
    if (system($system)==0) {
	print "  $system -- OK\n";
	$self->force;
    } else {
	# Hmmm, what to do if make clean failed?
    }
}

#-> sub CPAN::Distribution::install ;
sub install {
    my($self) = @_;
    $self->test;
    return if $CPAN::Signal;
    print "Running make install\n";
    EXCUSE: {
	  my @e;
	  exists $self->{'build_dir'} or push @e, "Has no own directory";
	  exists $self->{'make'} or push @e, "Make had some problems, maybe interrupted? Won't install";
	  exists $self->{'make'} and $self->{'make'} eq 'NO' and push @e, "Oops, make had returned bad status";
	  exists $self->{'install'} and push @e, $self->{'install'} eq "YES" ? "Already done" : "Already tried without success";
	  print join "", map {"  $_\n"} @e and return if @e;
     }
    chdir $self->{'build_dir'} or Carp::croak("Couldn't chdir to $self->{'build_dir'}");
    $self->debug("Changed directory to $self->{'build_dir'}") if $CPAN::DEBUG;
    my $system = join " ", $CPAN::Config->{'make'}, "install", $CPAN::Config->{make_install_arg};
    my($pipe) = IO::File->new("$system 2>&1 |");
    my($makeout) = "";

 # #If I were to try this, I'd do something like:
 # #
 # #  $SIG{ALRM} = sub { die "alarm\n" };
 # #
 # #  open(PROC,"make somesuch|");
 # #  eval {
 # #	alarm 30;
 # #	while(<PROC>) {
 # #	  alarm 30;
 # #	}
 # #  }
 # #  close(PROC);
 # #  alarm 0;
 # #
 # #I'm really not sure how reliable this would is, though.
 # #
 # #--
 # #Kenneth Albanowski (kjahds@kjahds.com, CIS: 70705,126)
 # #
 # #
 # #
 # #
	while (<$pipe>){
	print;
	$makeout .= $_;
    }
    $pipe->close;
    if ($?==0) {
	 print "  $system -- OK\n";
	 $self->{'install'} = "YES";
    } else {
	 $self->{'install'} = "NO";
	 print "  $system -- NOT OK\n";
	 if ($makeout =~ /permission/s && $> > 0) {
	     print "    You may have to su to root to install the package\n";
	 }
    }
}

#-> sub CPAN::Distribution::dir ;
sub dir {
    shift->{'build_dir'};
}

package CPAN::Bundle;
@CPAN::Bundle::ISA = qw(CPAN::Debug CPAN::InfoObj CPAN::Module);

#-> sub CPAN::Bundle::as_string ;
sub as_string {
    my($self) = @_;
    $self->contains;
    return $self->SUPER::as_string;
}

#-> sub CPAN::Bundle::contains ;
sub contains {
    my($self) = @_;
    my($parsefile) = $self->inst_file;
    unless ($parsefile) {
	# Try to get at it in the cpan directory
	$self->debug("no parsefile") if $CPAN::DEBUG;
	my $dist = $CPAN::META->instance('CPAN::Distribution',$self->{'CPAN_FILE'});
	$self->debug($dist->as_string) if $CPAN::DEBUG;
	$dist->get;
	$self->debug($dist->as_string) if $CPAN::DEBUG;
	my($todir) = $CPAN::META->catdir($CPAN::Config->{'cpan_home'},"Bundle");
	File::Path::mkpath($todir);
	my($me,$from,$to);
	($me = $self->id) =~ s/.*://;
	$from = $CPAN::META->catfile($dist->{'build_dir'},"$me.pm");
	$to = $CPAN::META->catfile($todir,"$me.pm");
	File::Copy::copy($from, $to) or Carp::confess("Couldn't copy $from to $to: $!");
	$parsefile = $to;
    }
    my @result;
    my $fh = new IO::File;
    local $/ = "\n";
    open($fh,$parsefile) or die "Could not open '$parsefile': $!";
    my $inpod = 0;
    while (<$fh>) {
	$inpod = /^=(?!head1\s+CONTENTS)/ ? 0 : /^=head1\s+CONTENTS/ ? 1 : $inpod;
	next unless $inpod;
	next if /^=/;
	next if /^\s+$/;
	chomp;
	push @result, (split " ", $_, 2)[0];
    }
    close $fh;
    delete $self->{STATUS};
    $self->{CONTAINS} = [@result];
    @result;
}

#-> sub CPAN::Bundle::inst_file ;
sub inst_file {
    my($self) = @_;
    my($me,$inst_file);
    ($me = $self->id) =~ s/.*://;
    $inst_file = $CPAN::META->catfile($CPAN::Config->{'cpan_home'},"Bundle", "$me.pm");
    return $self->{'INST_FILE'} = $inst_file if -f $inst_file;
    $inst_file = $self->SUPER::inst_file;
    return $self->{'INST_FILE'} = $inst_file if -f $inst_file;
    return $self->{'INST_FILE'}; # even if undefined?
}

#-> sub CPAN::Bundle::rematein ;
sub rematein {
    my($self,$meth) = @_;
    $self->debug("self[$self] meth[$meth]") if $CPAN::DEBUG;
    my($s);
    for $s ($self->contains) {
	$CPAN::META->instance('CPAN::Module',$s)->$meth();
    }
}

#-> sub CPAN::Bundle::force ;
sub force   { shift->rematein('force',@_); }
#-> sub CPAN::Bundle::install ;
sub install { shift->rematein('install',@_); }
#-> sub CPAN::Bundle::clean ;
sub clean   { shift->rematein('clean',@_); }
#-> sub CPAN::Bundle::test ;
sub test    { shift->rematein('test',@_); }
#-> sub CPAN::Bundle::make ;
sub make    { shift->rematein('make',@_); }

# XXX not yet implemented!
#-> sub CPAN::Bundle::readme ;
sub readme  {
    my($self) = @_;
    my($file) = $self->cpan_file or print("No File found for bundle ", $self->id, "\n"), return;
    $self->debug("self[$self] file[$file]") if $CPAN::DEBUG;
    $CPAN::META->instance('CPAN::Distribution',$file)->readme;
#    CPAN::FTP->localize("authors/id/$file",$index_wanted); # XXX
}

package CPAN::Module;
@CPAN::Module::ISA = qw(CPAN::Debug CPAN::InfoObj);

#-> sub CPAN::Module::as_glimpse ;
sub as_glimpse {
    my($self) = @_;
    my(@m);
    my $class = ref($self);
    $class =~ s/^CPAN:://;
    push @m, sprintf "%-15s %-15s (%s)\n", $class, $self->{ID}, $self->cpan_file;
    join "", @m;
}

#-> sub CPAN::Module::as_string ;
sub as_string {
    my($self) = @_;
    my(@m);
    CPAN->debug($self) if $CPAN::DEBUG;
    my $class = ref($self);
    $class =~ s/^CPAN:://;
    local($^W) = 0;
    push @m, $class, " id = $self->{ID}\n";
    my $sprintf = "    %-12s %s\n";
    push @m, sprintf $sprintf, 'DESCRIPTION', $self->{description} if $self->{description};
    my $sprintf2 = "    %-12s %s (%s)\n";
    my($userid);
    if ($userid = $self->{'CPAN_USERID'} || $self->{'userid'}){
	push @m, sprintf(
			 $sprintf2,
			 'CPAN_USERID',
			 $userid,
			 $CPAN::META->instance(CPAN::Author,$userid)->fullname
			)
    }
    push @m, sprintf $sprintf, 'CPAN_VERSION', $self->{CPAN_VERSION} if $self->{CPAN_VERSION};
    push @m, sprintf $sprintf, 'CPAN_FILE', $self->{CPAN_FILE} if $self->{CPAN_FILE};
    my $sprintf3 = "    %-12s %1s%1s%1s%1s (%s,%s,%s,%s)\n";
    my(%statd,%stats,%statl,%stati);
    @statd{qw,? i c a b R M S,} = qw,unknown idea pre-alpha alpha beta released mature standard,;
    @stats{qw,? m d u n,}       = qw,unknown mailing-list developer comp.lang.perl.* none,;
    @statl{qw,? p c + o,}       = qw,unknown perl C C++ other,;
    @stati{qw,? f r O,}         = qw,unknown functions references+ties object-oriented,;
    $statd{' '} = 'unknown';
    $stats{' '} = 'unknown';
    $statl{' '} = 'unknown';
    $stati{' '} = 'unknown';
    push @m, sprintf(
		     $sprintf3,
		     'DSLI_STATUS',
		     $self->{statd},
		     $self->{stats},
		     $self->{statl},
		     $self->{stati},
		     $statd{$self->{statd}},
		     $stats{$self->{stats}},
		     $statl{$self->{statl}},
		     $stati{$self->{stati}}
		    ) if $self->{statd};
    my $local_file = $self->inst_file;
    if ($local_file && ! exists $self->{MANPAGE}) {
	my $fh = IO::File->new($local_file) or Carp::croak("Couldn't open $local_file: $!");
	my $inpod = 0;
	my(@result);
	local $/ = "\n";
	while (<$fh>) {
	    $inpod = /^=(?!head1\s+NAME)/ ? 0 : /^=head1\s+NAME/ ? 1 : $inpod;
	    next unless $inpod;
	    next if /^=/;
	    next if /^\s+$/;
	    chomp;
	    push @result, $_;
	}
	close $fh;
	$self->{MANPAGE} = join " ", @result;
    }
    push @m, sprintf $sprintf, 'MANPAGE', $self->{MANPAGE} if $self->{MANPAGE};
    push @m, sprintf $sprintf, 'INST_FILE', $local_file || "(not installed)";
    push @m, sprintf $sprintf, 'INST_VERSION', $self->inst_version if $local_file;
    join "", @m, "\n";
}

#-> sub CPAN::Module::cpan_file ;
sub cpan_file    {
    my $self = shift;
    CPAN->debug($self->id) if $CPAN::DEBUG;
    unless (defined $self->{'CPAN_FILE'}) {
	CPAN::Index->reload;
    }
    if (defined $self->{'CPAN_FILE'}){
	return $self->{'CPAN_FILE'};
    } elsif (defined $self->{'userid'}) {
	return "Contact Author ".$self->{'userid'}."=".$CPAN::META->instance(CPAN::Author,$self->{'userid'})->fullname
    } else {
	return "N/A";
    }
}

*name = \&cpan_file;

#-> sub CPAN::Module::cpan_version ;
sub cpan_version { shift->{'CPAN_VERSION'} }

#-> sub CPAN::Module::force ;
sub force {
    my($self) = @_;
    $self->{'force_update'}++;
}

#-> sub CPAN::Module::rematein ;
sub rematein {
    my($self,$meth) = @_;
    $self->debug($self->id) if $CPAN::DEBUG;
    my $cpan_file = $self->cpan_file;
    return if $cpan_file eq "N/A";
    return if $cpan_file =~ /^Contact Author/;
    my $pack = $CPAN::META->instance('CPAN::Distribution',$cpan_file);
    $pack->called_for($self->id);
    $pack->force if exists $self->{'force_update'};
    $pack->$meth();
    delete $self->{'force_update'};
}

#-> sub CPAN::Module::readme ;
sub readme { shift->rematein('readme') }
#-> sub CPAN::Module::make ;
sub make   { shift->rematein('make') }
#-> sub CPAN::Module::clean ;
sub clean  { shift->rematein('clean') }
#-> sub CPAN::Module::test ;
sub test   { shift->rematein('test') }
#-> sub CPAN::Module::install ;
sub install {
    my($self) = @_;
    my($doit) = 0;
    my($latest) = $self->cpan_version;
    $latest ||= 0;
    my($inst_file) = $self->inst_file;
    my($have) = 0;
    if (defined $inst_file) {
	$have = $self->inst_version;
    }
    if ($inst_file && $have >= $latest && not exists $self->{'force_update'}) {
	print $self->id, " is up to date.\n";
    } else {
	$doit = 1;
    }
    $self->rematein('install') if $doit;
}

#-> sub CPAN::Module::inst_file ;
sub inst_file {
    my($self) = @_;
    my($dir,@packpath);
    @packpath = split /::/, $self->{ID};
    $packpath[-1] .= ".pm";
    foreach $dir (@INC) {
	my $pmfile = CPAN->catfile($dir,@packpath);
	if (-f $pmfile){
	    return $pmfile;
	}
    }
}

#-> sub CPAN::Module::xs_file ;
sub xs_file {
    my($self) = @_;
    my($dir,@packpath);
    @packpath = split /::/, $self->{ID};
    push @packpath, $packpath[-1];
    $packpath[-1] .= "." . $Config::Config{'dlext'};
    foreach $dir (@INC) {
	my $xsfile = CPAN->catfile($dir,'auto',@packpath);
	if (-f $xsfile){
	    return $xsfile;
	}
    }
}

#-> sub CPAN::Module::inst_version ;
sub inst_version {
    my($self) = @_;
    my $parsefile = $self->inst_file or return 0;
    my $have = MY->parse_version($parsefile);
    $have ||= 0;
    $have =~ s/\s+//g;
    $have ||= 0;
    $have;
}

package CPAN::CacheMgr;
use vars qw($Du);
@CPAN::CacheMgr::ISA = qw(CPAN::Debug CPAN::InfoObj);
use File::Find;

#-> sub CPAN::CacheMgr::as_string ;
sub as_string {
    eval { require Data::Dumper };
    if ($@) {
	return shift->SUPER::as_string;
    } else {
	return Data::Dumper::Dumper(shift);
    }
}

#-> sub CPAN::CacheMgr::cachesize ;
sub cachesize {
    shift->{DU};
}

# sub check {
#     my($self,@dirs) = @_;
#     return unless -d $self->{ID};
#     my $dir;
#     @dirs = $self->dirs unless @dirs;
#     for $dir (@dirs) {
# 	  $self->disk_usage($dir);
#     }
# }

#-> sub CPAN::CacheMgr::clean_cache ;
sub clean_cache {
    my $self = shift;
    my $dir;
    while ($self->{DU} > $self->{'MAX'} and $dir = shift @{$self->{FIFO}}) {
	$self->force_clean_cache($dir);
    }
    $self->debug("leaving clean_cache with $self->{DU}") if $CPAN::DEBUG;
}

#-> sub CPAN::CacheMgr::dir ;
sub dir {
    shift->{ID};
}

#-> sub CPAN::CacheMgr::entries ;
sub entries {
    my($self,$dir) = @_;
    $dir ||= $self->{ID};
    my($cwd) = Cwd::cwd();
    chdir $dir or Carp::croak("Can't chdir to $dir: $!");
    my $dh = DirHandle->new(".") or Carp::croak("Couldn't opendir $dir: $!");
    my(@entries);
    for ($dh->read) {
	next if $_ eq "." || $_ eq "..";
	if (-f $_) {
	    push @entries, $CPAN::META->catfile($dir,$_);
	} elsif (-d _) {
	    push @entries, $CPAN::META->catdir($dir,$_);
	} else {
	    print STDERR "Warning: weird direntry in $dir: $_\n";
	}
    }
    chdir $cwd or Carp::croak("Can't chdir to $cwd: $!");
    sort {-M $b <=> -M $a} @entries;
}

#-> sub CPAN::CacheMgr::disk_usage ;
sub disk_usage {
    my($self,$dir) = @_;
    if (! defined $dir or $dir eq "") {
	$self->debug("Cannot determine disk usage for some reason") if $CPAN::DEBUG;
	return;
    }
    return if defined $self->{SIZE}{$dir};
    local($Du) = 0;
    find(
	 sub {
	     return if -l $_;
	     $Du += -s;
	 },
	 $dir
	);
    $self->{SIZE}{$dir} = $Du/1024/1024;
    push @{$self->{FIFO}}, $dir;
    $self->debug("measured $dir is $Du") if $CPAN::DEBUG;
    $self->{DU} += $Du/1024/1024;
    if ($self->{DU} > $self->{'MAX'} ) {
	printf "...Hold on a sec... CPAN's cleaning the cache: %.2f MB > %.2f MB\n",
		$self->{DU}, $self->{'MAX'};
	$self->clean_cache;
    } else {
	$self->debug("NOT have to clean the cache: $self->{DU} <= $self->{'MAX'}") if $CPAN::DEBUG;
	$self->debug($self->as_string) if $CPAN::DEBUG;
    }
    $self->{DU};
}

#-> sub CPAN::CacheMgr::force_clean_cache ;
sub force_clean_cache {
    my($self,$dir) = @_;
    $self->debug("have to rmtree $dir, will free $self->{SIZE}{$dir}") if $CPAN::DEBUG;
    File::Path::rmtree($dir);
    $self->{DU} -= $self->{SIZE}{$dir};
    delete $self->{SIZE}{$dir};
}

#-> sub CPAN::CacheMgr::new ;
sub new {
    my $class = shift;
    my $self = { ID => $CPAN::Config->{'build_dir'}, MAX => $CPAN::Config->{'build_cache'}, DU => 0 };
    File::Path::mkpath($self->{ID});
    my $dh = DirHandle->new($self->{ID});
    bless $self, $class;
    $self->debug("dir [$self->{ID}]") if $CPAN::DEBUG;
    my $e;
    for $e ($self->entries) {
	next if $e eq ".." || $e eq ".";
	$self->debug("Have to check size $e") if $CPAN::DEBUG;
	$self->disk_usage($e);
    }
    $self;
}

package CPAN::Debug;

#-> sub CPAN::Debug::debug ;
sub debug {
    my($self,$arg) = @_;
    my($caller,$func,$line,@rest) = caller(1); # caller(0) eg Complete, caller(1) eg readline
    ($caller) = caller(0);
    $caller =~ s/.*:://;
#    print "caller[$caller]func[$func]line[$line]rest[@rest]\n";
#    print "CPAN::DEBUG{caller}[$CPAN::DEBUG{$caller}]CPAN::DEBUG[$CPAN::DEBUG]\n";
    if ($CPAN::DEBUG{$caller} & $CPAN::DEBUG){
	if (ref $arg) {
	    eval { require Data::Dumper };
	    if ($@) {
		print $arg->as_string;
	    } else {
		print Data::Dumper::Dumper($arg);
	    }
	} else {
	    print "Debug($caller:$func,$line,@rest): $arg\n"
	}
    }
}

package CPAN::Config;
import ExtUtils::MakeMaker 'neatvalue';
use vars qw(%can);

%can = (
  'commit' => "Commit changes to disk",
  'defaults' => "Reload defaults from disk",
);

#-> sub CPAN::Config::edit ;
sub edit {
    my($class,@args) = @_;
    return unless @args;
    CPAN->debug("class[$class]args[".join(" | ",@args)."]");
    my($o,$str,$func,$args,$key_exists);
    $o = shift @args;
    if($can{$o}) {
	$class->$o(@args);
	return 1;
    } else {
	if (ref($CPAN::Config->{$o}) eq ARRAY) {
	    $func = shift @args;
	    # Let's avoid eval, it's easier to comprehend without.
	    if ($func eq "push") {
		push @{$CPAN::Config->{$o}}, @args;
	    } elsif ($func eq "pop") {
		pop @{$CPAN::Config->{$o}};
	    } elsif ($func eq "shift") {
		shift @{$CPAN::Config->{$o}};
	    } elsif ($func eq "unshift") {
		unshift @{$CPAN::Config->{$o}}, @args;
	    } elsif ($func eq "splice") {
		splice @{$CPAN::Config->{$o}}, @args;
	    } else {
		$CPAN::Config->{$o} = [@args];
	    }
	} else {
	    $CPAN::Config->{$o} = $args[0];
	    print "    $o    ";
	    print defined $CPAN::Config->{$o} ? $CPAN::Config->{$o} : "UNDEFINED";
	}
    }
}

#-> sub CPAN::Config::commit ;
sub commit {
    my($self, $configpm) = @_;
    my $mode;
    # mkpath!?

    my($fh) = IO::File->new;
    $configpm ||= cfile();
    if (-f $configpm) {
	$mode = (stat $configpm)[2];
	if ($mode && ! -w _) {
	    print "$configpm is not writable\n" and return;
	}
	#chmod 0644, $configpm; #?
    }

    my $msg = <<EOF unless $configpm =~ /MyConfig/;

# This is CPAN.pm's systemwide configuration file.  This file provides
# defaults for users, and the values can be changed in a per-user configuration
# file. The user-config file is being looked for as ~/.cpan/CPAN/MyConfig.pm.

EOF
    $msg ||= "\n";
    open $fh, ">$configpm" or warn "Couldn't open >$configpm: $!";
    print $fh qq[$msg\$CPAN::Config = \{\n];
    foreach (sort keys %$CPAN::Config) {
	print $fh "  '$_' => ", ExtUtils::MakeMaker::neatvalue($CPAN::Config->{$_}), ",\n";
    }

    print $fh "};\n1;\n__END__\n";
    close $fh;

    #$mode = 0444 | ( $mode & 0111 ? 0111 : 0 );
    #chmod $mode, $configpm;
    $self->defaults;
    print "commit: wrote $configpm\n";
    1;
}

*default = \&defaults;
#-> sub CPAN::Config::defaults ;
sub defaults {
    my($self) = @_;
    $self->unload;
    $self->load;
    1;
}

my $dot_cpan;
#-> sub CPAN::Config::load ;
sub load {
    my($self) = @_;
    eval {require CPAN::Config;};       # We eval, because of some MakeMaker problems
    unshift @INC, $CPAN::META->catdir($ENV{HOME},".cpan") unless $dot_cpan++;
    eval {require CPAN::MyConfig;};     # where you can override system wide settings
    unless ( $self->load_succeeded ) {
	  require CPAN::FirstTime;
	  my($configpm,$fh);
	  if (defined $INC{"CPAN/Config.pm"} && -w $INC{"CPAN/Config.pm"}) {
	      $configpm = $INC{"CPAN/Config.pm"};
	  } elsif (defined $INC{"CPAN/MyConfig.pm"} && -w $INC{"CPAN/MyConfig.pm"}) {
	      $configpm = $INC{"CPAN/MyConfig.pm"};
	  } else {
	      my($path_to_cpan) = File::Basename::dirname($INC{"CPAN.pm"});
	      my($configpmdir) = MY->catdir($path_to_cpan,"CPAN");
	      my($configpmtest) = MY->catfile($configpmdir,"Config.pm");
	      if (-d $configpmdir || File::Path::mkpath($configpmdir)) {
#_#_# following code dumped core on me with 5.003_11, a.k.
#_#_#		       $fh = IO::File->new;
#_#_#		       if ($fh->open(">$configpmtest")) {
#_#_#			  $fh->print("1;\n");
#_#_#			   $configpm = $configpmtest;
#_#_#		       }
		  if (-w $configpmtest or -w $configpmdir) {
		      $configpm = $configpmtest;
		  }
	      }
	      unless ($configpm) {
		  $configpmdir = MY->catdir($ENV{HOME},".cpan","CPAN");
		  File::Path::mkpath($configpmdir);
		  $configpmtest = MY->catfile($configpmdir,"MyConfig.pm");
		  if (-w $configpmtest or -w $configpmdir) {
		      $configpm = $configpmtest;
		  } else {
		      warn "WARNING: CPAN.pm is unable to create a configuration file.\n";
		  }
	      }
	  }
	  warn "Calling CPAN::FirstTime::init($configpm)";
	  CPAN::FirstTime::init($configpm);
    }
}

#-> sub CPAN::Config::load_succeeded ;
sub load_succeeded {
    my($miss) = 0;
    for (qw(
	    cpan_home keep_source_where build_dir build_cache index_expire
	    gzip tar unzip make pager makepl_arg make_arg make_install_arg
	    urllist inhibit_startup_message
	   )) {
	$miss++ unless defined $CPAN::Config->{$_}; # we want them all
    }
    return !$miss;
}

#-> sub CPAN::Config::unload ;
sub unload {
    delete $INC{'CPAN/MyConfig.pm'};
    delete $INC{'CPAN/Config.pm'};
}

#-> sub CPAN::Config::cfile ;
sub cfile {
    $INC{'CPAN/MyConfig.pm'} || $INC{'CPAN/Config.pm'};
}

*h = \&help;
#-> sub CPAN::Config::help ;
sub help {
    print <<EOF;
Known options:
  defaults  reload default config values from disk
  commit    commit session changes to disk

You may edit key values in the follow fashion:

  o conf build_cache 15

  o conf build_dir "/foo/bar"

  o conf urllist shift

  o conf urllist unshift ftp://ftp.foo.bar/

EOF
    undef; #don't reprint CPAN::Config
}

#-> sub CPAN::Config::complete ;
sub complete {
    my($word,$line,$pos) = @_;
    $word ||= "";
    my(@words) = split " ", $line;
    my(@o_conf) = (sort keys %CPAN::Config::can, sort keys %$CPAN::Config);
    return (@o_conf) unless @words>2;
    if($words[2] =~ /->(.*)/) {
	my $meth = $1;
	my(@methods) = qw(shift unshift push pop splice);
	return @methods unless $meth;
	return sort grep /^\Q$meth\E/, @methods;
    }
    return sort grep /^\Q$word\E/, @o_conf;
}

1;

=head1 NAME

CPAN - query, download and build perl modules from CPAN sites

=head1 SYNOPSIS

Interactive mode:

  perl -MCPAN -e shell;

Batch mode:

  use CPAN;

  autobundle, clean, install, make, recompile, test

=head1 DESCRIPTION

The CPAN module is designed to automate the make and install of perl
modules and extensions. It includes some searching capabilities as
well knows a how to use Net::FTP or LWP to fetch the raw data from the
net.

Modules are fetched from one or more of the mirrored CPAN
(Comprehensive Perl Archive Network) sites and unpacked in a dedicated
directory.

The CPAN module also supports the concept of named and versioned
'bundles' of modules. Bundles simplify the handling of sets of
related modules. See BUNDLES below.

The package contains a session manager and a cache manager. There is
no status retained between sessions. The session manager keeps track
of what has been fetched, built and installed in the current
session. The cache manager keeps track of the disk space occupied by
the make processes and deletes excess space in a simple FIFO style.

All methods provided are accessible in a programmer style and in an
interactive shell style.

=head2 Interactive Mode

The interactive mode is entered by running

    perl -MCPAN -e shell

which puts you into a readline interface. You will have most fun if
you install Term::ReadKey and Term::ReadLine to enjoy both history and
completion.

Once you are on the command line, type 'h' and the rest should be
self-explanatory.

The most common uses of the interactive modes are

=over 2

=item Searching for authors, bundles, distribution files and modules

There are corresponding one-letter commands C<a>, C<b>, C<d>, and C<m>
for each of the four categories and another, C<i> for any of the other
four. Each of the four entities is implemented as a class with
slightly differing methods for displaying an object.

Arguments you pass to these commands are either strings matching exact
the identification string of an object or regular expressions that are
then matched case-insensitively against various attributes of the
objects. The parser recognizes a regualar expression only if you
enclose it between two slashes.

The principle is that the number of found objects influences how an
item is displayed. If the search finds one item, we display the result
of object-E<gt>as_string, but if we find more than one, we display
each as object-E<gt>as_glimpse. E.g.

    cpan> a ANDK     
    Author id = ANDK
	EMAIL        a.koenig@franz.ww.TU-Berlin.DE
	FULLNAME     Andreas König


    cpan> a /andk/   
    Author id = ANDK
	EMAIL        a.koenig@franz.ww.TU-Berlin.DE
	FULLNAME     Andreas König


    cpan> a /and.*rt/
    Author          ANDYD (Andy Dougherty)
    Author          MERLYN (Randal L. Schwartz)

=item make, test, install, clean modules or distributions

The four commands do indeed exist just as written above. Each of them
takes as many arguments as provided and investigates for each what it
might be. Is it a distribution file (recognized by embedded slashes),
this file is being processed. Is it a module, CPAN determines the
distribution file where this module is included and processes that.

Any C<make> and C<test> are run unconditionally. An C<install
E<lt>distribution_fileE<gt>> also is run unconditionally.  But for
C<install E<lt>module<gt>> CPAN checks if an install is actually
needed for it and prints I<"Foo up to date"> in case the module
doesnE<39>t need to be updated.

CPAN also keeps track of what it has done within the current session
and doesnE<39>t try to build a package a second time regardless if it
succeeded or not. The C<force > command takes as first argument the
method to invoke (currently: make, test, or install) and executes the
command from scratch.

Example:

    cpan> install OpenGL
    OpenGL is up to date.
    cpan> force install OpenGL
    Running make
    OpenGL-0.4/
    OpenGL-0.4/COPYRIGHT
    [...]

=back

=head2 CPAN::Shell

The commands that are available in the shell interface are methods in
the package CPAN::Shell. If you enter the shell command, all your
input is split by the Text::ParseWords::shellwords() routine which
acts like most shells do. The first word is being interpreted as the
method to be called and the rest of the words are treated as arguments
to this method.

=head2 ProgrammerE<39>s interface

If you do not enter the shell, the available shell commands are both
available as methods (C<CPAN::Shell-E<gt>install(...)>) and as
functions in the calling package (C<install(...)>). The
programmerE<39>s interface has beta status. Do not heavily rely on it,
changes may still happen.

=head2 Cache Manager

Currently the cache manager only keeps track of the build directory
($CPAN::Config->{build_dir}). It is a simple FIFO mechanism that
deletes complete directories below build_dir as soon as the size of
all directories there gets bigger than $CPAN::Config->{build_cache}
(in MB). The contents of this cache may be used for later
re-installations that you intend to do manually, but will never be
trusted by CPAN itself. This is due to the fact that the user might
use these directories for building modules on different architectures.

There is another directory ($CPAN::Config->{keep_source_where}) where
the original distribution files are kept. This directory is not
covered by the cache manager and must be controlled by the user. If
you choose to have the same directory as build_dir and as
keep_source_where directory, then your sources will be deleted with
the same fifo mechanism.

=head2 Bundles

A bundle is just a perl module in the namespace Bundle:: that does not
define any functions or methods. It usually only contains documentation.

It starts like a perl module with a package declaration and a $VERSION
variable. After that the pod section looks like any other pod with the
only difference, that I<one special pod section> exists starting with
(verbatim):

	=head1 CONTENTS

In this pod section each line obeys the format

        Module_Name [Version_String] [- optional text]

The only required part is the first field, the name of a module
(eg. Foo::Bar, ie. I<not> the name of the distribution file). The rest
of the line is optional. The comment part is delimited by a dash just
as in the man page header.

The distribution of a bundle should follow the same convention as
other distributions. The bundle() function in the CPAN module simply
parses the module that defines the bundle and returns the module names
that are listed in the described CONTENTS section.

Bundles are treated specially in the CPAN package. If you say 'install
Bundle::Tkkit' (assuming such a bundle exists), CPAN will install all
the modules in the CONTENTS section of the pod.  You can install your
own Bundles locally by placing a conformant Bundle file somewhere into
your @INC path. The autobundle() command which is available in the
shell interface does that for you by including all currently installed
modules in a snapshot bundle file.

There is a meaningless Bundle::Demo available on CPAN. Try to install
it, it usually does no harm, just demonstrates what the Bundle
interface looks like.

=head2 autobundle

C<autobundle> writes a bundle file into the 
C<$CPAN::Config->{cpan_home}/Bundle> directory. The file contains a list
of all modules that are both available from CPAN and currently
installed within @INC. The name of the bundle file is based on the
current date and a counter.

=head2 recompile

recompile() is a very special command in that it takes no argument and
runs the make/test/install cycle with brute force over all installed
dynamically loadable extensions (aka XS modules) with 'force' in
effect. Primary purpose of this command is to act as a rescue in case
your perl breaks binary compatibility. If one of the modules that CPAN
uses is in turn depending on binary compatibility (so you cannot run
CPAN commands), then you should try the CPAN::Nox module for recovery.

A very popular use for recompile is to finish a network
installation. Imagine, you have a common source tree for two different
architectures. You decide to do a completely independent fresh
installation. You start on one architecture with the help of a Bundle
file produced earlier. CPAN installs the whole Bundle for you, but
when you try to repeat the job on the second architecture, CPAN
responds with a C<"Foo up to date"> message for all modules. So you
will be glad to run recompile in the second architecture and
youE<39>re done.

=head1 CONFIGURATION

When the CPAN module is installed a site wide configuration file is
created as CPAN/Config.pm. The default values defined there can be
overridden in another configuration file: CPAN/MyConfig.pm. You can
store this file in $HOME/.cpan/CPAN/MyConfig.pm if you want, because
$HOME/.cpan is added to the search path of the CPAN module before the
use() or require() statements.

Currently the following keys in the hash reference $CPAN::Config are
defined:

  build_cache       size of cache for directories to build modules
  build_dir         locally accessible directory to build modules
  index_expire      after how many days refetch index files
  cpan_home         local directory reserved for this package
  gzip		    location of external program gzip
  inhibit_startup_message
                    if true, does not print the startup message
  keep_source       keep the source in a local directory?
  keep_source_where where keep the source (if we do)
  make              location of external program make
  make_arg	    arguments that should always be passed to 'make'
  make_install_arg  same as make_arg for 'make install'
  makepl_arg	    arguments passed to 'perl Makefile.PL'
  pager             location of external program more (or any pager)
  tar               location of external program tar
  unzip             location of external program unzip
  urllist	    arrayref to nearby CPAN sites (or equivalent locations)

You can set and query each of these options interactively in the cpan
shell with the command set defined within the C<o conf> command:

=over 2

=item o conf E<lt>scalar optionE<gt>

prints the current value of the I<scalar option>

=item o conf E<lt>scalar optionE<gt> E<lt>valueE<gt>

Sets the value of the I<scalar option> to I<value>

=item o conf E<lt>list optionE<gt>

prints the current value of the I<list option> in MakeMaker's
neatvalue format.

=item o conf E<lt>list optionE<gt> [shift|pop]

shifts or pops the array in the I<list option> variable

=item o conf E<lt>list optionE<gt> [unshift|push|splice] E<lt>listE<gt>

works like the corresponding perl commands. Whitespace is used to
determine the arguments.

=back

=head1 SECURITY

There's no strong security layer in CPAN.pm. CPAN.pm helps you to
install foreign, unmasked, unsigned code on your machine. We compare
to a checksum that comes from the net just as the distribution file
itself. If somebody has managed to tamper with the distribution file,
they may have as well tampered with the CHECKSUMS file. Future
development will go towards stong authentification.

=head1 EXPORT

Most functions in package CPAN are exported per default. The reason
for this is that the primary use is intended for the cpan shell or for
oneliners.

=head1 Debugging

The debugging of this module is pretty difficult, because we have
interferences of the software producing the indices on CPAN, of the
mirroring process on CPAN, of packaging, of configuration, of
synchronicity, and of bugs within CPAN.pm.

In interactive mode you can try "o debug" which will list options for
debugging the various parts of the package. The output may not be very
useful for you as it's just a byproduct of my own testing, but if you
have an idea which part of the package may have a bug, it's sometimes
worth to give it a try and send me more specific output. You should
know that "o debug" has built-in completion support.

=head2 Prerequisites

If you have a local mirror of CPAN and can access all files with
"file:" URLs, then you only need perl5.003 to run this
module. Otherwise you need Net::FTP intalled. LWP may be required for
non-UNIX systems or if your nearest CPAN site is associated with an
URL that is not C<ftp:>.

This module presumes that all packages on CPAN

=over 2

=item *

declare their $VERSION variable in an easy to parse manner. This
prerequisite can hardly be relaxed because it consumes by far too much
memory to load all packages into the running program just to determine
the $VERSION variable . Currently all programs that are dealing with
VERSION use something like this

    perl -MExtUtils::MakeMaker -le \
        'print MM->parse_version($ARGV[0])' filename

If you are author of a package and wonder if your VERSION can be
parsed, please try the above method.

=item *

come as compressed or gzipped tarfiles or as zip files and contain a
Makefile.PL (well we try to handle a bit more, but without much
enthusiasm).

=back

=head1 AUTHOR

Andreas König E<lt>a.koenig@mind.deE<gt>

=head1 SEE ALSO

perl(1), CPAN::Nox(3)

=cut