/* * perlio.c Copyright (c) 1996-2006, Nick Ing-Simmons You may distribute * under the terms of either the GNU General Public License or the * Artistic License, as specified in the README file. */ /* * Hour after hour for nearly three weary days he had jogged up and down, * over passes, and through long dales, and across many streams. */ /* This file contains the functions needed to implement PerlIO, which * is Perl's private replacement for the C stdio library. This is used * by default unless you compile with -Uuseperlio or run with * PERLIO=:stdio (but don't do this unless you know what you're doing) */ /* * If we have ActivePerl-like PERL_IMPLICIT_SYS then we need a dTHX to get * at the dispatch tables, even when we do not need it for other reasons. * Invent a dSYS macro to abstract this out */ #ifdef PERL_IMPLICIT_SYS #define dSYS dTHX #else #define dSYS dNOOP #endif #define VOIDUSED 1 #ifdef PERL_MICRO # include "uconfig.h" #else # ifndef USE_CROSS_COMPILE # include "config.h" # else # include "xconfig.h" # endif #endif #define PERLIO_NOT_STDIO 0 #if !defined(PERLIO_IS_STDIO) && !defined(USE_SFIO) /* * #define PerlIO FILE */ #endif /* * This file provides those parts of PerlIO abstraction * which are not #defined in perlio.h. * Which these are depends on various Configure #ifdef's */ #include "EXTERN.h" #define PERL_IN_PERLIO_C #include "perl.h" #ifdef PERL_IMPLICIT_CONTEXT #undef dSYS #define dSYS dTHX #endif #include "XSUB.h" #ifdef __Lynx__ /* Missing proto on LynxOS */ int mkstemp(char*); #endif /* Call the callback or PerlIOBase, and return failure. */ #define Perl_PerlIO_or_Base(f, callback, base, failure, args) \ if (PerlIOValid(f)) { \ const PerlIO_funcs * const tab = PerlIOBase(f)->tab;\ if (tab && tab->callback) \ return (*tab->callback) args; \ else \ return PerlIOBase_ ## base args; \ } \ else \ SETERRNO(EBADF, SS_IVCHAN); \ return failure /* Call the callback or fail, and return failure. */ #define Perl_PerlIO_or_fail(f, callback, failure, args) \ if (PerlIOValid(f)) { \ const PerlIO_funcs * const tab = PerlIOBase(f)->tab;\ if (tab && tab->callback) \ return (*tab->callback) args; \ SETERRNO(EINVAL, LIB_INVARG); \ } \ else \ SETERRNO(EBADF, SS_IVCHAN); \ return failure /* Call the callback or PerlIOBase, and be void. */ #define Perl_PerlIO_or_Base_void(f, callback, base, args) \ if (PerlIOValid(f)) { \ const PerlIO_funcs * const tab = PerlIOBase(f)->tab;\ if (tab && tab->callback) \ (*tab->callback) args; \ else \ PerlIOBase_ ## base args; \ } \ else \ SETERRNO(EBADF, SS_IVCHAN) /* Call the callback or fail, and be void. */ #define Perl_PerlIO_or_fail_void(f, callback, args) \ if (PerlIOValid(f)) { \ const PerlIO_funcs * const tab = PerlIOBase(f)->tab;\ if (tab && tab->callback) \ (*tab->callback) args; \ else \ SETERRNO(EINVAL, LIB_INVARG); \ } \ else \ SETERRNO(EBADF, SS_IVCHAN) #ifndef USE_SFIO int perlsio_binmode(FILE *fp, int iotype, int mode) { /* * This used to be contents of do_binmode in doio.c */ #ifdef DOSISH # if defined(atarist) || defined(__MINT__) if (!fflush(fp)) { if (mode & O_BINARY) ((FILE *) fp)->_flag |= _IOBIN; else ((FILE *) fp)->_flag &= ~_IOBIN; return 1; } return 0; # else dTHX; #ifdef NETWARE if (PerlLIO_setmode(fp, mode) != -1) { #else if (PerlLIO_setmode(fileno(fp), mode) != -1) { #endif # if defined(WIN32) && defined(__BORLANDC__) /* * The translation mode of the stream is maintained independent of * the translation mode of the fd in the Borland RTL (heavy * digging through their runtime sources reveal). User has to set * the mode explicitly for the stream (though they don't document * this anywhere). GSAR 97-5-24 */ fseek(fp, 0L, 0); if (mode & O_BINARY) fp->flags |= _F_BIN; else fp->flags &= ~_F_BIN; # endif return 1; } else return 0; # endif #else # if defined(USEMYBINMODE) dTHX; if (my_binmode(fp, iotype, mode) != FALSE) return 1; else return 0; # else PERL_UNUSED_ARG(fp); PERL_UNUSED_ARG(iotype); PERL_UNUSED_ARG(mode); return 1; # endif #endif } #endif /* sfio */ #ifndef O_ACCMODE #define O_ACCMODE 3 /* Assume traditional implementation */ #endif int PerlIO_intmode2str(int rawmode, char *mode, int *writing) { const int result = rawmode & O_ACCMODE; int ix = 0; int ptype; switch (result) { case O_RDONLY: ptype = IoTYPE_RDONLY; break; case O_WRONLY: ptype = IoTYPE_WRONLY; break; case O_RDWR: default: ptype = IoTYPE_RDWR; break; } if (writing) *writing = (result != O_RDONLY); if (result == O_RDONLY) { mode[ix++] = 'r'; } #ifdef O_APPEND else if (rawmode & O_APPEND) { mode[ix++] = 'a'; if (result != O_WRONLY) mode[ix++] = '+'; } #endif else { if (result == O_WRONLY) mode[ix++] = 'w'; else { mode[ix++] = 'r'; mode[ix++] = '+'; } } if (rawmode & O_BINARY) mode[ix++] = 'b'; mode[ix] = '\0'; return ptype; } #ifndef PERLIO_LAYERS int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names) { if (!names || !*names || strEQ(names, ":crlf") || strEQ(names, ":raw") || strEQ(names, ":bytes") ) { return 0; } Perl_croak(aTHX_ "Cannot apply \"%s\" in non-PerlIO perl", names); /* * NOTREACHED */ return -1; } void PerlIO_destruct(pTHX) { } int PerlIO_binmode(pTHX_ PerlIO *fp, int iotype, int mode, const char *names) { #ifdef USE_SFIO PERL_UNUSED_ARG(iotype); PERL_UNUSED_ARG(mode); PERL_UNUSED_ARG(names); return 1; #else return perlsio_binmode(fp, iotype, mode); #endif } PerlIO * PerlIO_fdupopen(pTHX_ PerlIO *f, CLONE_PARAMS *param, int flags) { #if defined(PERL_MICRO) || defined(__SYMBIAN32__) return NULL; #else #ifdef PERL_IMPLICIT_SYS return PerlSIO_fdupopen(f); #else #ifdef WIN32 return win32_fdupopen(f); #else if (f) { const int fd = PerlLIO_dup(PerlIO_fileno(f)); if (fd >= 0) { char mode[8]; #ifdef DJGPP const int omode = djgpp_get_stream_mode(f); #else const int omode = fcntl(fd, F_GETFL); #endif PerlIO_intmode2str(omode,mode,NULL); /* the r+ is a hack */ return PerlIO_fdopen(fd, mode); } return NULL; } else { SETERRNO(EBADF, SS_IVCHAN); } #endif return NULL; #endif #endif } /* * De-mux PerlIO_openn() into fdopen, freopen and fopen type entries */ PerlIO * PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, int imode, int perm, PerlIO *old, int narg, SV **args) { if (narg) { if (narg > 1) { Perl_croak(aTHX_ "More than one argument to open"); } if (*args == &PL_sv_undef) return PerlIO_tmpfile(); else { const char *name = SvPV_nolen_const(*args); if (*mode == IoTYPE_NUMERIC) { fd = PerlLIO_open3(name, imode, perm); if (fd >= 0) return PerlIO_fdopen(fd, mode + 1); } else if (old) { return PerlIO_reopen(name, mode, old); } else { return PerlIO_open(name, mode); } } } else { return PerlIO_fdopen(fd, (char *) mode); } return NULL; } XS(XS_PerlIO__Layer__find) { dXSARGS; if (items < 2) Perl_croak(aTHX_ "Usage class->find(name[,load])"); else { const char * const name = SvPV_nolen_const(ST(1)); ST(0) = (strEQ(name, "crlf") || strEQ(name, "raw")) ? &PL_sv_yes : &PL_sv_undef; XSRETURN(1); } } void Perl_boot_core_PerlIO(pTHX) { newXS("PerlIO::Layer::find", XS_PerlIO__Layer__find, __FILE__); } #endif #ifdef PERLIO_IS_STDIO void PerlIO_init(pTHX) { PERL_UNUSED_CONTEXT; /* * Does nothing (yet) except force this file to be included in perl * binary. That allows this file to force inclusion of other functions * that may be required by loadable extensions e.g. for * FileHandle::tmpfile */ } #undef PerlIO_tmpfile PerlIO * PerlIO_tmpfile(void) { return tmpfile(); } #else /* PERLIO_IS_STDIO */ #ifdef USE_SFIO #undef HAS_FSETPOS #undef HAS_FGETPOS /* * This section is just to make sure these functions get pulled in from * libsfio.a */ #undef PerlIO_tmpfile PerlIO * PerlIO_tmpfile(void) { return sftmp(0); } void PerlIO_init(pTHX) { PERL_UNUSED_CONTEXT; /* * Force this file to be included in perl binary. Which allows this * file to force inclusion of other functions that may be required by * loadable extensions e.g. for FileHandle::tmpfile */ /* * Hack sfio does its own 'autoflush' on stdout in common cases. Flush * results in a lot of lseek()s to regular files and lot of small * writes to pipes. */ sfset(sfstdout, SF_SHARE, 0); } /* This is not the reverse of PerlIO_exportFILE(), PerlIO_releaseFILE() is. */ PerlIO * PerlIO_importFILE(FILE *stdio, const char *mode) { const int fd = fileno(stdio); if (!mode || !*mode) { mode = "r+"; } return PerlIO_fdopen(fd, mode); } FILE * PerlIO_findFILE(PerlIO *pio) { const int fd = PerlIO_fileno(pio); FILE * const f = fdopen(fd, "r+"); PerlIO_flush(pio); if (!f && errno == EINVAL) f = fdopen(fd, "w"); if (!f && errno == EINVAL) f = fdopen(fd, "r"); return f; } #else /* USE_SFIO */ /*======================================================================================*/ /* * Implement all the PerlIO interface ourselves. */ #include "perliol.h" /* * We _MUST_ have if we are using lseek() and may have large * files */ #ifdef I_UNISTD #include #endif #ifdef HAS_MMAP #include #endif void PerlIO_debug(const char *fmt, ...) { va_list ap; dSYS; va_start(ap, fmt); if (!PL_perlio_debug_fd && !PL_tainting && PL_uid == PL_euid && PL_gid == PL_egid) { const char * const s = PerlEnv_getenv("PERLIO_DEBUG"); if (s && *s) PL_perlio_debug_fd = PerlLIO_open3(s, O_WRONLY | O_CREAT | O_APPEND, 0666); else PL_perlio_debug_fd = -1; } if (PL_perlio_debug_fd > 0) { dTHX; #ifdef USE_ITHREADS const char * const s = CopFILE(PL_curcop); /* Use fixed buffer as sv_catpvf etc. needs SVs */ char buffer[1024]; const STRLEN len1 = my_snprintf(buffer, sizeof(buffer), "%.40s:%" IVdf " ", s ? s : "(none)", (IV) CopLINE(PL_curcop)); const STRLEN len2 = my_vsnprintf(buffer + len1, sizeof(buffer) - len1, fmt, ap); PerlLIO_write(PL_perlio_debug_fd, buffer, len1 + len2); #else const char *s = CopFILE(PL_curcop); STRLEN len; SV * const sv = newSVpvs(""); Perl_sv_catpvf(aTHX_ sv, "%s:%" IVdf " ", s ? s : "(none)", (IV) CopLINE(PL_curcop)); Perl_sv_vcatpvf(aTHX_ sv, fmt, &ap); s = SvPV_const(sv, len); PerlLIO_write(PL_perlio_debug_fd, s, len); SvREFCNT_dec(sv); #endif } va_end(ap); } /*--------------------------------------------------------------------------------------*/ /* * Inner level routines */ /* * Table of pointers to the PerlIO structs (malloc'ed) */ #define PERLIO_TABLE_SIZE 64 PerlIO * PerlIO_allocate(pTHX) { dVAR; /* * Find a free slot in the table, allocating new table as necessary */ PerlIO **last; PerlIO *f; last = &PL_perlio; while ((f = *last)) { int i; last = (PerlIO **) (f); for (i = 1; i < PERLIO_TABLE_SIZE; i++) { if (!*++f) { return f; } } } Newxz(f,PERLIO_TABLE_SIZE,PerlIO); if (!f) { return NULL; } *last = f; return f + 1; } #undef PerlIO_fdupopen PerlIO * PerlIO_fdupopen(pTHX_ PerlIO *f, CLONE_PARAMS *param, int flags) { if (PerlIOValid(f)) { const PerlIO_funcs * const tab = PerlIOBase(f)->tab; PerlIO_debug("fdupopen f=%p param=%p\n",(void*)f,(void*)param); if (tab && tab->Dup) return (*tab->Dup)(aTHX_ PerlIO_allocate(aTHX), f, param, flags); else { return PerlIOBase_dup(aTHX_ PerlIO_allocate(aTHX), f, param, flags); } } else SETERRNO(EBADF, SS_IVCHAN); return NULL; } void PerlIO_cleantable(pTHX_ PerlIO **tablep) { PerlIO * const table = *tablep; if (table) { int i; PerlIO_cleantable(aTHX_(PerlIO **) & (table[0])); for (i = PERLIO_TABLE_SIZE - 1; i > 0; i--) { PerlIO * const f = table + i; if (*f) { PerlIO_close(f); } } Safefree(table); *tablep = NULL; } } PerlIO_list_t * PerlIO_list_alloc(pTHX) { PerlIO_list_t *list; PERL_UNUSED_CONTEXT; Newxz(list, 1, PerlIO_list_t); list->refcnt = 1; return list; } void PerlIO_list_free(pTHX_ PerlIO_list_t *list) { if (list) { if (--list->refcnt == 0) { if (list->array) { IV i; for (i = 0; i < list->cur; i++) { if (list->array[i].arg) SvREFCNT_dec(list->array[i].arg); } Safefree(list->array); } Safefree(list); } } } void PerlIO_list_push(pTHX_ PerlIO_list_t *list, PerlIO_funcs *funcs, SV *arg) { dVAR; PerlIO_pair_t *p; PERL_UNUSED_CONTEXT; if (list->cur >= list->len) { list->len += 8; if (list->array) Renew(list->array, list->len, PerlIO_pair_t); else Newx(list->array, list->len, PerlIO_pair_t); } p = &(list->array[list->cur++]); p->funcs = funcs; if ((p->arg = arg)) { SvREFCNT_inc_simple_void_NN(arg); } } PerlIO_list_t * PerlIO_clone_list(pTHX_ PerlIO_list_t *proto, CLONE_PARAMS *param) { PerlIO_list_t *list = NULL; if (proto) { int i; list = PerlIO_list_alloc(aTHX); for (i=0; i < proto->cur; i++) { SV *arg = NULL; if (proto->array[i].arg) arg = PerlIO_sv_dup(aTHX_ proto->array[i].arg,param); PerlIO_list_push(aTHX_ list, proto->array[i].funcs, arg); } } return list; } void PerlIO_clone(pTHX_ PerlInterpreter *proto, CLONE_PARAMS *param) { #ifdef USE_ITHREADS PerlIO **table = &proto->Iperlio; PerlIO *f; PL_perlio = NULL; PL_known_layers = PerlIO_clone_list(aTHX_ proto->Iknown_layers, param); PL_def_layerlist = PerlIO_clone_list(aTHX_ proto->Idef_layerlist, param); PerlIO_allocate(aTHX); /* root slot is never used */ PerlIO_debug("Clone %p from %p\n",(void*)aTHX,(void*)proto); while ((f = *table)) { int i; table = (PerlIO **) (f++); for (i = 1; i < PERLIO_TABLE_SIZE; i++) { if (*f) { (void) fp_dup(f, 0, param); } f++; } } #else PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(proto); PERL_UNUSED_ARG(param); #endif } void PerlIO_destruct(pTHX) { dVAR; PerlIO **table = &PL_perlio; PerlIO *f; #ifdef USE_ITHREADS PerlIO_debug("Destruct %p\n",(void*)aTHX); #endif while ((f = *table)) { int i; table = (PerlIO **) (f++); for (i = 1; i < PERLIO_TABLE_SIZE; i++) { PerlIO *x = f; const PerlIOl *l; while ((l = *x)) { if (l->tab->kind & PERLIO_K_DESTRUCT) { PerlIO_debug("Destruct popping %s\n", l->tab->name); PerlIO_flush(x); PerlIO_pop(aTHX_ x); } else { x = PerlIONext(x); } } f++; } } } void PerlIO_pop(pTHX_ PerlIO *f) { const PerlIOl *l = *f; if (l) { PerlIO_debug("PerlIO_pop f=%p %s\n", (void*)f, l->tab->name); if (l->tab->Popped) { /* * If popped returns non-zero do not free its layer structure * it has either done so itself, or it is shared and still in * use */ if ((*l->tab->Popped) (aTHX_ f) != 0) return; } *f = l->next; Safefree(l); } } /* Return as an array the stack of layers on a filehandle. Note that * the stack is returned top-first in the array, and there are three * times as many array elements as there are layers in the stack: the * first element of a layer triplet is the name, the second one is the * arguments, and the third one is the flags. */ AV * PerlIO_get_layers(pTHX_ PerlIO *f) { dVAR; AV * const av = newAV(); if (PerlIOValid(f)) { PerlIOl *l = PerlIOBase(f); while (l) { SV * const name = l->tab && l->tab->name ? newSVpv(l->tab->name, 0) : &PL_sv_undef; SV * const arg = l->tab && l->tab->Getarg ? (*l->tab->Getarg)(aTHX_ &l, 0, 0) : &PL_sv_undef; av_push(av, name); av_push(av, arg); av_push(av, newSViv((IV)l->flags)); l = l->next; } } return av; } /*--------------------------------------------------------------------------------------*/ /* * XS Interface for perl code */ PerlIO_funcs * PerlIO_find_layer(pTHX_ const char *name, STRLEN len, int load) { dVAR; IV i; if ((SSize_t) len <= 0) len = strlen(name); for (i = 0; i < PL_known_layers->cur; i++) { PerlIO_funcs * const f = PL_known_layers->array[i].funcs; if (memEQ(f->name, name, len) && f->name[len] == 0) { PerlIO_debug("%.*s => %p\n", (int) len, name, (void*)f); return f; } } if (load && PL_subname && PL_def_layerlist && PL_def_layerlist->cur >= 2) { if (PL_in_load_module) { Perl_croak(aTHX_ "Recursive call to Perl_load_module in PerlIO_find_layer"); return NULL; } else { SV * const pkgsv = newSVpvs("PerlIO"); SV * const layer = newSVpvn(name, len); CV * const cv = get_cv("PerlIO::Layer::NoWarnings", FALSE); ENTER; SAVEINT(PL_in_load_module); if (cv) { SAVEGENERICSV(PL_warnhook); PL_warnhook = (SV *) (SvREFCNT_inc_simple_NN(cv)); } PL_in_load_module++; /* * The two SVs are magically freed by load_module */ Perl_load_module(aTHX_ 0, pkgsv, NULL, layer, NULL); PL_in_load_module--; LEAVE; return PerlIO_find_layer(aTHX_ name, len, 0); } } PerlIO_debug("Cannot find %.*s\n", (int) len, name); return NULL; } #ifdef USE_ATTRIBUTES_FOR_PERLIO static int perlio_mg_set(pTHX_ SV *sv, MAGIC *mg) { if (SvROK(sv)) { IO * const io = GvIOn((GV *) SvRV(sv)); PerlIO * const ifp = IoIFP(io); PerlIO * const ofp = IoOFP(io); Perl_warn(aTHX_ "set %" SVf " %p %p %p", sv, io, ifp, ofp); } return 0; } static int perlio_mg_get(pTHX_ SV *sv, MAGIC *mg) { if (SvROK(sv)) { IO * const io = GvIOn((GV *) SvRV(sv)); PerlIO * const ifp = IoIFP(io); PerlIO * const ofp = IoOFP(io); Perl_warn(aTHX_ "get %" SVf " %p %p %p", sv, io, ifp, ofp); } return 0; } static int perlio_mg_clear(pTHX_ SV *sv, MAGIC *mg) { Perl_warn(aTHX_ "clear %" SVf, sv); return 0; } static int perlio_mg_free(pTHX_ SV *sv, MAGIC *mg) { Perl_warn(aTHX_ "free %" SVf, sv); return 0; } MGVTBL perlio_vtab = { perlio_mg_get, perlio_mg_set, NULL, /* len */ perlio_mg_clear, perlio_mg_free }; XS(XS_io_MODIFY_SCALAR_ATTRIBUTES) { dXSARGS; SV * const sv = SvRV(ST(1)); AV * const av = newAV(); MAGIC *mg; int count = 0; int i; sv_magic(sv, (SV *) av, PERL_MAGIC_ext, NULL, 0); SvRMAGICAL_off(sv); mg = mg_find(sv, PERL_MAGIC_ext); mg->mg_virtual = &perlio_vtab; mg_magical(sv); Perl_warn(aTHX_ "attrib %" SVf, sv); for (i = 2; i < items; i++) { STRLEN len; const char * const name = SvPV_const(ST(i), len); SV * const layer = PerlIO_find_layer(aTHX_ name, len, 1); if (layer) { av_push(av, SvREFCNT_inc_simple_NN(layer)); } else { ST(count) = ST(i); count++; } } SvREFCNT_dec(av); XSRETURN(count); } #endif /* USE_ATTIBUTES_FOR_PERLIO */ SV * PerlIO_tab_sv(pTHX_ PerlIO_funcs *tab) { HV * const stash = gv_stashpvs("PerlIO::Layer", TRUE); SV * const sv = sv_bless(newRV_noinc(newSViv(PTR2IV(tab))), stash); return sv; } XS(XS_PerlIO__Layer__NoWarnings) { /* This is used as a %SIG{__WARN__} handler to supress warnings during loading of layers. */ dVAR; dXSARGS; if (items) PerlIO_debug("warning:%s\n",SvPV_nolen_const(ST(0))); XSRETURN(0); } XS(XS_PerlIO__Layer__find) { dVAR; dXSARGS; if (items < 2) Perl_croak(aTHX_ "Usage class->find(name[,load])"); else { STRLEN len; const char * const name = SvPV_const(ST(1), len); const bool load = (items > 2) ? SvTRUE(ST(2)) : 0; PerlIO_funcs * const layer = PerlIO_find_layer(aTHX_ name, len, load); ST(0) = (layer) ? sv_2mortal(PerlIO_tab_sv(aTHX_ layer)) : &PL_sv_undef; XSRETURN(1); } } void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab) { dVAR; if (!PL_known_layers) PL_known_layers = PerlIO_list_alloc(aTHX); PerlIO_list_push(aTHX_ PL_known_layers, tab, NULL); PerlIO_debug("define %s %p\n", tab->name, (void*)tab); } int PerlIO_parse_layers(pTHX_ PerlIO_list_t *av, const char *names) { dVAR; if (names) { const char *s = names; while (*s) { while (isSPACE(*s) || *s == ':') s++; if (*s) { STRLEN llen = 0; const char *e = s; const char *as = NULL; STRLEN alen = 0; if (!isIDFIRST(*s)) { /* * Message is consistent with how attribute lists are * passed. Even though this means "foo : : bar" is * seen as an invalid separator character. */ const char q = ((*s == '\'') ? '"' : '\''); if (ckWARN(WARN_LAYER)) Perl_warner(aTHX_ packWARN(WARN_LAYER), "Invalid separator character %c%c%c in PerlIO layer specification %s", q, *s, q, s); SETERRNO(EINVAL, LIB_INVARG); return -1; } do { e++; } while (isALNUM(*e)); llen = e - s; if (*e == '(') { int nesting = 1; as = ++e; while (nesting) { switch (*e++) { case ')': if (--nesting == 0) alen = (e - 1) - as; break; case '(': ++nesting; break; case '\\': /* * It's a nul terminated string, not allowed * to \ the terminating null. Anything other * character is passed over. */ if (*e++) { break; } /* * Drop through */ case '\0': e--; if (ckWARN(WARN_LAYER)) Perl_warner(aTHX_ packWARN(WARN_LAYER), "Argument list not closed for PerlIO layer \"%.*s\"", (int) (e - s), s); return -1; default: /* * boring. */ break; } } } if (e > s) { PerlIO_funcs * const layer = PerlIO_find_layer(aTHX_ s, llen, 1); if (layer) { PerlIO_list_push(aTHX_ av, layer, (as) ? newSVpvn(as, alen) : &PL_sv_undef); } else { if (ckWARN(WARN_LAYER)) Perl_warner(aTHX_ packWARN(WARN_LAYER), "Unknown PerlIO layer \"%.*s\"", (int) llen, s); return -1; } } s = e; } } } return 0; } void PerlIO_default_buffer(pTHX_ PerlIO_list_t *av) { dVAR; PERLIO_FUNCS_DECL(*tab) = &PerlIO_perlio; #ifdef PERLIO_USING_CRLF tab = &PerlIO_crlf; #else if (PerlIO_stdio.Set_ptrcnt) tab = &PerlIO_stdio; #endif PerlIO_debug("Pushing %s\n", tab->name); PerlIO_list_push(aTHX_ av, PerlIO_find_layer(aTHX_ tab->name, 0, 0), &PL_sv_undef); } SV * PerlIO_arg_fetch(PerlIO_list_t *av, IV n) { return av->array[n].arg; } PerlIO_funcs * PerlIO_layer_fetch(pTHX_ PerlIO_list_t *av, IV n, PerlIO_funcs *def) { if (n >= 0 && n < av->cur) { PerlIO_debug("Layer %" IVdf " is %s\n", n, av->array[n].funcs->name); return av->array[n].funcs; } if (!def) Perl_croak(aTHX_ "panic: PerlIO layer array corrupt"); return def; } IV PerlIOPop_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PERL_UNUSED_ARG(mode); PERL_UNUSED_ARG(arg); PERL_UNUSED_ARG(tab); if (PerlIOValid(f)) { PerlIO_flush(f); PerlIO_pop(aTHX_ f); return 0; } return -1; } PERLIO_FUNCS_DECL(PerlIO_remove) = { sizeof(PerlIO_funcs), "pop", 0, PERLIO_K_DUMMY | PERLIO_K_UTF8, PerlIOPop_pushed, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* flush */ NULL, /* fill */ NULL, NULL, NULL, NULL, NULL, /* get_base */ NULL, /* get_bufsiz */ NULL, /* get_ptr */ NULL, /* get_cnt */ NULL, /* set_ptrcnt */ }; PerlIO_list_t * PerlIO_default_layers(pTHX) { dVAR; if (!PL_def_layerlist) { const char * const s = (PL_tainting) ? NULL : PerlEnv_getenv("PERLIO"); PERLIO_FUNCS_DECL(*osLayer) = &PerlIO_unix; PL_def_layerlist = PerlIO_list_alloc(aTHX); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_unix)); #if defined(WIN32) PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_win32)); #if 0 osLayer = &PerlIO_win32; #endif #endif PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_raw)); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_perlio)); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_stdio)); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_crlf)); #ifdef HAS_MMAP PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_mmap)); #endif PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_utf8)); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_remove)); PerlIO_define_layer(aTHX_ PERLIO_FUNCS_CAST(&PerlIO_byte)); PerlIO_list_push(aTHX_ PL_def_layerlist, PerlIO_find_layer(aTHX_ osLayer->name, 0, 0), &PL_sv_undef); if (s) { PerlIO_parse_layers(aTHX_ PL_def_layerlist, s); } else { PerlIO_default_buffer(aTHX_ PL_def_layerlist); } } if (PL_def_layerlist->cur < 2) { PerlIO_default_buffer(aTHX_ PL_def_layerlist); } return PL_def_layerlist; } void Perl_boot_core_PerlIO(pTHX) { #ifdef USE_ATTRIBUTES_FOR_PERLIO newXS("io::MODIFY_SCALAR_ATTRIBUTES", XS_io_MODIFY_SCALAR_ATTRIBUTES, __FILE__); #endif newXS("PerlIO::Layer::find", XS_PerlIO__Layer__find, __FILE__); newXS("PerlIO::Layer::NoWarnings", XS_PerlIO__Layer__NoWarnings, __FILE__); } PerlIO_funcs * PerlIO_default_layer(pTHX_ I32 n) { dVAR; PerlIO_list_t * const av = PerlIO_default_layers(aTHX); if (n < 0) n += av->cur; return PerlIO_layer_fetch(aTHX_ av, n, PERLIO_FUNCS_CAST(&PerlIO_stdio)); } #define PerlIO_default_top() PerlIO_default_layer(aTHX_ -1) #define PerlIO_default_btm() PerlIO_default_layer(aTHX_ 0) void PerlIO_stdstreams(pTHX) { dVAR; if (!PL_perlio) { PerlIO_allocate(aTHX); PerlIO_fdopen(0, "Ir" PERLIO_STDTEXT); PerlIO_fdopen(1, "Iw" PERLIO_STDTEXT); PerlIO_fdopen(2, "Iw" PERLIO_STDTEXT); } } PerlIO * PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab), const char *mode, SV *arg) { if (tab->fsize != sizeof(PerlIO_funcs)) { mismatch: Perl_croak(aTHX_ "Layer does not match this perl"); } if (tab->size) { PerlIOl *l; if (tab->size < sizeof(PerlIOl)) { goto mismatch; } /* Real layer with a data area */ if (f) { char *temp; Newxz(temp, tab->size, char); l = (PerlIOl*)temp; if (l) { l->next = *f; l->tab = (PerlIO_funcs*) tab; *f = l; PerlIO_debug("PerlIO_push f=%p %s %s %p\n", (void*)f, tab->name, (mode) ? mode : "(Null)", (void*)arg); if (*l->tab->Pushed && (*l->tab->Pushed) (aTHX_ f, mode, arg, (PerlIO_funcs*) tab) != 0) { PerlIO_pop(aTHX_ f); return NULL; } } else return NULL; } } else if (f) { /* Pseudo-layer where push does its own stack adjust */ PerlIO_debug("PerlIO_push f=%p %s %s %p\n", (void*)f, tab->name, (mode) ? mode : "(Null)", (void*)arg); if (tab->Pushed && (*tab->Pushed) (aTHX_ f, mode, arg, (PerlIO_funcs*) tab) != 0) { return NULL; } } return f; } IV PerlIOBase_binmode(pTHX_ PerlIO *f) { if (PerlIOValid(f)) { /* Is layer suitable for raw stream ? */ if (PerlIOBase(f)->tab->kind & PERLIO_K_RAW) { /* Yes - turn off UTF-8-ness, to undo UTF-8 locale effects */ PerlIOBase(f)->flags &= ~PERLIO_F_UTF8; } else { /* Not suitable - pop it */ PerlIO_pop(aTHX_ f); } return 0; } return -1; } IV PerlIORaw_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PERL_UNUSED_ARG(mode); PERL_UNUSED_ARG(arg); PERL_UNUSED_ARG(tab); if (PerlIOValid(f)) { PerlIO *t; const PerlIOl *l; PerlIO_flush(f); /* * Strip all layers that are not suitable for a raw stream */ t = f; while (t && (l = *t)) { if (l->tab->Binmode) { /* Has a handler - normal case */ if ((*l->tab->Binmode)(aTHX_ f) == 0) { if (*t == l) { /* Layer still there - move down a layer */ t = PerlIONext(t); } } else { return -1; } } else { /* No handler - pop it */ PerlIO_pop(aTHX_ t); } } if (PerlIOValid(f)) { PerlIO_debug(":raw f=%p :%s\n", (void*)f, PerlIOBase(f)->tab->name); return 0; } } return -1; } int PerlIO_apply_layera(pTHX_ PerlIO *f, const char *mode, PerlIO_list_t *layers, IV n, IV max) { int code = 0; while (n < max) { PerlIO_funcs * const tab = PerlIO_layer_fetch(aTHX_ layers, n, NULL); if (tab) { if (!PerlIO_push(aTHX_ f, tab, mode, PerlIOArg)) { code = -1; break; } } n++; } return code; } int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode, const char *names) { int code = 0; if (f && names) { PerlIO_list_t * const layers = PerlIO_list_alloc(aTHX); code = PerlIO_parse_layers(aTHX_ layers, names); if (code == 0) { code = PerlIO_apply_layera(aTHX_ f, mode, layers, 0, layers->cur); } PerlIO_list_free(aTHX_ layers); } return code; } /*--------------------------------------------------------------------------------------*/ /* * Given the abstraction above the public API functions */ int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int mode, const char *names) { PerlIO_debug("PerlIO_binmode f=%p %s %c %x %s\n", (void*)f, (PerlIOBase(f)) ? PerlIOBase(f)->tab->name : "(Null)", iotype, mode, (names) ? names : "(Null)"); if (names) { /* Do not flush etc. if (e.g.) switching encodings. if a pushed layer knows it needs to flush lower layers (for example :unix which is never going to call them) it can do the flush when it is pushed. */ return PerlIO_apply_layers(aTHX_ f, NULL, names) == 0 ? TRUE : FALSE; } else { /* Fake 5.6 legacy of using this call to turn ON O_TEXT */ #ifdef PERLIO_USING_CRLF /* Legacy binmode only has meaning if O_TEXT has a value distinct from O_BINARY so we can look for it in mode. */ if (!(mode & O_BINARY)) { /* Text mode */ /* FIXME?: Looking down the layer stack seems wrong, but is a way of reaching past (say) an encoding layer to flip CRLF-ness of the layer(s) below */ while (*f) { /* Perhaps we should turn on bottom-most aware layer e.g. Ilya's idea that UNIX TTY could serve */ if (PerlIOBase(f)->tab->kind & PERLIO_K_CANCRLF) { if (!(PerlIOBase(f)->flags & PERLIO_F_CRLF)) { /* Not in text mode - flush any pending stuff and flip it */ PerlIO_flush(f); PerlIOBase(f)->flags |= PERLIO_F_CRLF; } /* Only need to turn it on in one layer so we are done */ return TRUE; } f = PerlIONext(f); } /* Not finding a CRLF aware layer presumably means we are binary which is not what was requested - so we failed We _could_ push :crlf layer but so could caller */ return FALSE; } #endif /* Legacy binmode is now _defined_ as being equivalent to pushing :raw So code that used to be here is now in PerlIORaw_pushed(). */ return PerlIO_push(aTHX_ f, PERLIO_FUNCS_CAST(&PerlIO_raw), NULL, NULL) ? TRUE : FALSE; } } int PerlIO__close(pTHX_ PerlIO *f) { if (PerlIOValid(f)) { PerlIO_funcs * const tab = PerlIOBase(f)->tab; if (tab && tab->Close) return (*tab->Close)(aTHX_ f); else return PerlIOBase_close(aTHX_ f); } else { SETERRNO(EBADF, SS_IVCHAN); return -1; } } int Perl_PerlIO_close(pTHX_ PerlIO *f) { const int code = PerlIO__close(aTHX_ f); while (PerlIOValid(f)) { PerlIO_pop(aTHX_ f); } return code; } int Perl_PerlIO_fileno(pTHX_ PerlIO *f) { dVAR; Perl_PerlIO_or_Base(f, Fileno, fileno, -1, (aTHX_ f)); } static PerlIO_funcs * PerlIO_layer_from_ref(pTHX_ SV *sv) { dVAR; /* * For any scalar type load the handler which is bundled with perl */ if (SvTYPE(sv) < SVt_PVAV) return PerlIO_find_layer(aTHX_ STR_WITH_LEN("scalar"), 1); /* * For other types allow if layer is known but don't try and load it */ switch (SvTYPE(sv)) { case SVt_PVAV: return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Array"), 0); case SVt_PVHV: return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Hash"), 0); case SVt_PVCV: return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Code"), 0); case SVt_PVGV: return PerlIO_find_layer(aTHX_ STR_WITH_LEN("Glob"), 0); } return NULL; } PerlIO_list_t * PerlIO_resolve_layers(pTHX_ const char *layers, const char *mode, int narg, SV **args) { dVAR; PerlIO_list_t *def = PerlIO_default_layers(aTHX); int incdef = 1; if (!PL_perlio) PerlIO_stdstreams(aTHX); if (narg) { SV * const arg = *args; /* * If it is a reference but not an object see if we have a handler * for it */ if (SvROK(arg) && !sv_isobject(arg)) { PerlIO_funcs * const handler = PerlIO_layer_from_ref(aTHX_ SvRV(arg)); if (handler) { def = PerlIO_list_alloc(aTHX); PerlIO_list_push(aTHX_ def, handler, &PL_sv_undef); incdef = 0; } /* * Don't fail if handler cannot be found :via(...) etc. may do * something sensible else we will just stringfy and open * resulting string. */ } } if (!layers || !*layers) layers = Perl_PerlIO_context_layers(aTHX_ mode); if (layers && *layers) { PerlIO_list_t *av; if (incdef) { IV i; av = PerlIO_list_alloc(aTHX); for (i = 0; i < def->cur; i++) { PerlIO_list_push(aTHX_ av, def->array[i].funcs, def->array[i].arg); } } else { av = def; } if (PerlIO_parse_layers(aTHX_ av, layers) == 0) { return av; } else { PerlIO_list_free(aTHX_ av); return NULL; } } else { if (incdef) def->refcnt++; return def; } } PerlIO * PerlIO_openn(pTHX_ const char *layers, const char *mode, int fd, int imode, int perm, PerlIO *f, int narg, SV **args) { dVAR; if (!f && narg == 1 && *args == &PL_sv_undef) { if ((f = PerlIO_tmpfile())) { if (!layers || !*layers) layers = Perl_PerlIO_context_layers(aTHX_ mode); if (layers && *layers) PerlIO_apply_layers(aTHX_ f, mode, layers); } } else { PerlIO_list_t *layera; IV n; PerlIO_funcs *tab = NULL; if (PerlIOValid(f)) { /* * This is "reopen" - it is not tested as perl does not use it * yet */ PerlIOl *l = *f; layera = PerlIO_list_alloc(aTHX); while (l) { SV * const arg = (l->tab->Getarg) ? (*l->tab->Getarg) (aTHX_ &l, NULL, 0) : &PL_sv_undef; PerlIO_list_push(aTHX_ layera, l->tab, arg); l = *PerlIONext(&l); } } else { layera = PerlIO_resolve_layers(aTHX_ layers, mode, narg, args); if (!layera) { return NULL; } } /* * Start at "top" of layer stack */ n = layera->cur - 1; while (n >= 0) { PerlIO_funcs * const t = PerlIO_layer_fetch(aTHX_ layera, n, NULL); if (t && t->Open) { tab = t; break; } n--; } if (tab) { /* * Found that layer 'n' can do opens - call it */ if (narg > 1 && !(tab->kind & PERLIO_K_MULTIARG)) { Perl_croak(aTHX_ "More than one argument to open(,':%s')",tab->name); } PerlIO_debug("openn(%s,'%s','%s',%d,%x,%o,%p,%d,%p)\n", tab->name, layers ? layers : "(Null)", mode, fd, imode, perm, (void*)f, narg, (void*)args); if (tab->Open) f = (*tab->Open) (aTHX_ tab, layera, n, mode, fd, imode, perm, f, narg, args); else { SETERRNO(EINVAL, LIB_INVARG); f = NULL; } if (f) { if (n + 1 < layera->cur) { /* * More layers above the one that we used to open - * apply them now */ if (PerlIO_apply_layera(aTHX_ f, mode, layera, n + 1, layera->cur) != 0) { /* If pushing layers fails close the file */ PerlIO_close(f); f = NULL; } } } } PerlIO_list_free(aTHX_ layera); } return f; } SSize_t Perl_PerlIO_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { Perl_PerlIO_or_Base(f, Read, read, -1, (aTHX_ f, vbuf, count)); } SSize_t Perl_PerlIO_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { Perl_PerlIO_or_Base(f, Unread, unread, -1, (aTHX_ f, vbuf, count)); } SSize_t Perl_PerlIO_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { Perl_PerlIO_or_fail(f, Write, -1, (aTHX_ f, vbuf, count)); } int Perl_PerlIO_seek(pTHX_ PerlIO *f, Off_t offset, int whence) { Perl_PerlIO_or_fail(f, Seek, -1, (aTHX_ f, offset, whence)); } Off_t Perl_PerlIO_tell(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Tell, -1, (aTHX_ f)); } int Perl_PerlIO_flush(pTHX_ PerlIO *f) { dVAR; if (f) { if (*f) { const PerlIO_funcs *tab = PerlIOBase(f)->tab; if (tab && tab->Flush) return (*tab->Flush) (aTHX_ f); else return 0; /* If no Flush defined, silently succeed. */ } else { PerlIO_debug("Cannot flush f=%p\n", (void*)f); SETERRNO(EBADF, SS_IVCHAN); return -1; } } else { /* * Is it good API design to do flush-all on NULL, a potentially * errorneous input? Maybe some magical value (PerlIO* * PERLIO_FLUSH_ALL = (PerlIO*)-1;)? Yes, stdio does similar * things on fflush(NULL), but should we be bound by their design * decisions? --jhi */ PerlIO **table = &PL_perlio; int code = 0; while ((f = *table)) { int i; table = (PerlIO **) (f++); for (i = 1; i < PERLIO_TABLE_SIZE; i++) { if (*f && PerlIO_flush(f) != 0) code = -1; f++; } } return code; } } void PerlIOBase_flush_linebuf(pTHX) { dVAR; PerlIO **table = &PL_perlio; PerlIO *f; while ((f = *table)) { int i; table = (PerlIO **) (f++); for (i = 1; i < PERLIO_TABLE_SIZE; i++) { if (*f && (PerlIOBase(f)-> flags & (PERLIO_F_LINEBUF | PERLIO_F_CANWRITE)) == (PERLIO_F_LINEBUF | PERLIO_F_CANWRITE)) PerlIO_flush(f); f++; } } } int Perl_PerlIO_fill(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Fill, -1, (aTHX_ f)); } int PerlIO_isutf8(PerlIO *f) { if (PerlIOValid(f)) return (PerlIOBase(f)->flags & PERLIO_F_UTF8) != 0; else SETERRNO(EBADF, SS_IVCHAN); return -1; } int Perl_PerlIO_eof(pTHX_ PerlIO *f) { Perl_PerlIO_or_Base(f, Eof, eof, -1, (aTHX_ f)); } int Perl_PerlIO_error(pTHX_ PerlIO *f) { Perl_PerlIO_or_Base(f, Error, error, -1, (aTHX_ f)); } void Perl_PerlIO_clearerr(pTHX_ PerlIO *f) { Perl_PerlIO_or_Base_void(f, Clearerr, clearerr, (aTHX_ f)); } void Perl_PerlIO_setlinebuf(pTHX_ PerlIO *f) { Perl_PerlIO_or_Base_void(f, Setlinebuf, setlinebuf, (aTHX_ f)); } int PerlIO_has_base(PerlIO *f) { if (PerlIOValid(f)) { const PerlIO_funcs * const tab = PerlIOBase(f)->tab; if (tab) return (tab->Get_base != NULL); SETERRNO(EINVAL, LIB_INVARG); } else SETERRNO(EBADF, SS_IVCHAN); return 0; } int PerlIO_fast_gets(PerlIO *f) { if (PerlIOValid(f) && (PerlIOBase(f)->flags & PERLIO_F_FASTGETS)) { const PerlIO_funcs * const tab = PerlIOBase(f)->tab; if (tab) return (tab->Set_ptrcnt != NULL); SETERRNO(EINVAL, LIB_INVARG); } else SETERRNO(EBADF, SS_IVCHAN); return 0; } int PerlIO_has_cntptr(PerlIO *f) { if (PerlIOValid(f)) { const PerlIO_funcs * const tab = PerlIOBase(f)->tab; if (tab) return (tab->Get_ptr != NULL && tab->Get_cnt != NULL); SETERRNO(EINVAL, LIB_INVARG); } else SETERRNO(EBADF, SS_IVCHAN); return 0; } int PerlIO_canset_cnt(PerlIO *f) { if (PerlIOValid(f)) { const PerlIO_funcs * const tab = PerlIOBase(f)->tab; if (tab) return (tab->Set_ptrcnt != NULL); SETERRNO(EINVAL, LIB_INVARG); } else SETERRNO(EBADF, SS_IVCHAN); return 0; } STDCHAR * Perl_PerlIO_get_base(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Get_base, NULL, (aTHX_ f)); } int Perl_PerlIO_get_bufsiz(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Get_bufsiz, -1, (aTHX_ f)); } STDCHAR * Perl_PerlIO_get_ptr(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Get_ptr, NULL, (aTHX_ f)); } int Perl_PerlIO_get_cnt(pTHX_ PerlIO *f) { Perl_PerlIO_or_fail(f, Get_cnt, -1, (aTHX_ f)); } void Perl_PerlIO_set_cnt(pTHX_ PerlIO *f, int cnt) { Perl_PerlIO_or_fail_void(f, Set_ptrcnt, (aTHX_ f, NULL, cnt)); } void Perl_PerlIO_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, int cnt) { Perl_PerlIO_or_fail_void(f, Set_ptrcnt, (aTHX_ f, ptr, cnt)); } /*--------------------------------------------------------------------------------------*/ /* * utf8 and raw dummy layers */ IV PerlIOUtf8_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(mode); PERL_UNUSED_ARG(arg); if (PerlIOValid(f)) { if (tab->kind & PERLIO_K_UTF8) PerlIOBase(f)->flags |= PERLIO_F_UTF8; else PerlIOBase(f)->flags &= ~PERLIO_F_UTF8; return 0; } return -1; } PERLIO_FUNCS_DECL(PerlIO_utf8) = { sizeof(PerlIO_funcs), "utf8", 0, PERLIO_K_DUMMY | PERLIO_K_UTF8, PerlIOUtf8_pushed, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* flush */ NULL, /* fill */ NULL, NULL, NULL, NULL, NULL, /* get_base */ NULL, /* get_bufsiz */ NULL, /* get_ptr */ NULL, /* get_cnt */ NULL, /* set_ptrcnt */ }; PERLIO_FUNCS_DECL(PerlIO_byte) = { sizeof(PerlIO_funcs), "bytes", 0, PERLIO_K_DUMMY, PerlIOUtf8_pushed, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* flush */ NULL, /* fill */ NULL, NULL, NULL, NULL, NULL, /* get_base */ NULL, /* get_bufsiz */ NULL, /* get_ptr */ NULL, /* get_cnt */ NULL, /* set_ptrcnt */ }; PerlIO * PerlIORaw_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *old, int narg, SV **args) { PerlIO_funcs * const tab = PerlIO_default_btm(); PERL_UNUSED_ARG(self); if (tab && tab->Open) return (*tab->Open) (aTHX_ tab, layers, n - 1, mode, fd, imode, perm, old, narg, args); SETERRNO(EINVAL, LIB_INVARG); return NULL; } PERLIO_FUNCS_DECL(PerlIO_raw) = { sizeof(PerlIO_funcs), "raw", 0, PERLIO_K_DUMMY, PerlIORaw_pushed, PerlIOBase_popped, PerlIORaw_open, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* flush */ NULL, /* fill */ NULL, NULL, NULL, NULL, NULL, /* get_base */ NULL, /* get_bufsiz */ NULL, /* get_ptr */ NULL, /* get_cnt */ NULL, /* set_ptrcnt */ }; /*--------------------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------------------*/ /* * "Methods" of the "base class" */ IV PerlIOBase_fileno(pTHX_ PerlIO *f) { return PerlIOValid(f) ? PerlIO_fileno(PerlIONext(f)) : -1; } char * PerlIO_modestr(PerlIO * f, char *buf) { char *s = buf; if (PerlIOValid(f)) { const IV flags = PerlIOBase(f)->flags; if (flags & PERLIO_F_APPEND) { *s++ = 'a'; if (flags & PERLIO_F_CANREAD) { *s++ = '+'; } } else if (flags & PERLIO_F_CANREAD) { *s++ = 'r'; if (flags & PERLIO_F_CANWRITE) *s++ = '+'; } else if (flags & PERLIO_F_CANWRITE) { *s++ = 'w'; if (flags & PERLIO_F_CANREAD) { *s++ = '+'; } } #ifdef PERLIO_USING_CRLF if (!(flags & PERLIO_F_CRLF)) *s++ = 'b'; #endif } *s = '\0'; return buf; } IV PerlIOBase_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PerlIOl * const l = PerlIOBase(f); PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(arg); l->flags &= ~(PERLIO_F_CANREAD | PERLIO_F_CANWRITE | PERLIO_F_TRUNCATE | PERLIO_F_APPEND); if (tab->Set_ptrcnt != NULL) l->flags |= PERLIO_F_FASTGETS; if (mode) { if (*mode == IoTYPE_NUMERIC || *mode == IoTYPE_IMPLICIT) mode++; switch (*mode++) { case 'r': l->flags |= PERLIO_F_CANREAD; break; case 'a': l->flags |= PERLIO_F_APPEND | PERLIO_F_CANWRITE; break; case 'w': l->flags |= PERLIO_F_TRUNCATE | PERLIO_F_CANWRITE; break; default: SETERRNO(EINVAL, LIB_INVARG); return -1; } while (*mode) { switch (*mode++) { case '+': l->flags |= PERLIO_F_CANREAD | PERLIO_F_CANWRITE; break; case 'b': l->flags &= ~PERLIO_F_CRLF; break; case 't': l->flags |= PERLIO_F_CRLF; break; default: SETERRNO(EINVAL, LIB_INVARG); return -1; } } } else { if (l->next) { l->flags |= l->next->flags & (PERLIO_F_CANREAD | PERLIO_F_CANWRITE | PERLIO_F_TRUNCATE | PERLIO_F_APPEND); } } #if 0 PerlIO_debug("PerlIOBase_pushed f=%p %s %s fl=%08" UVxf " (%s)\n", f, PerlIOBase(f)->tab->name, (omode) ? omode : "(Null)", l->flags, PerlIO_modestr(f, temp)); #endif return 0; } IV PerlIOBase_popped(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(f); return 0; } SSize_t PerlIOBase_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { /* * Save the position as current head considers it */ const Off_t old = PerlIO_tell(f); PerlIO_push(aTHX_ f, PERLIO_FUNCS_CAST(&PerlIO_pending), "r", NULL); PerlIOSelf(f, PerlIOBuf)->posn = old; return PerlIOBuf_unread(aTHX_ f, vbuf, count); } SSize_t PerlIOBase_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { STDCHAR *buf = (STDCHAR *) vbuf; if (f) { if (!(PerlIOBase(f)->flags & PERLIO_F_CANREAD)) { PerlIOBase(f)->flags |= PERLIO_F_ERROR; SETERRNO(EBADF, SS_IVCHAN); return 0; } while (count > 0) { get_cnt: { SSize_t avail = PerlIO_get_cnt(f); SSize_t take = 0; if (avail > 0) take = ((SSize_t)count < avail) ? (SSize_t)count : avail; if (take > 0) { STDCHAR *ptr = PerlIO_get_ptr(f); Copy(ptr, buf, take, STDCHAR); PerlIO_set_ptrcnt(f, ptr + take, (avail -= take)); count -= take; buf += take; if (avail == 0) /* set_ptrcnt could have reset avail */ goto get_cnt; } if (count > 0 && avail <= 0) { if (PerlIO_fill(f) != 0) break; } } } return (buf - (STDCHAR *) vbuf); } return 0; } IV PerlIOBase_noop_ok(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(f); return 0; } IV PerlIOBase_noop_fail(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(f); return -1; } IV PerlIOBase_close(pTHX_ PerlIO *f) { IV code = -1; if (PerlIOValid(f)) { PerlIO *n = PerlIONext(f); code = PerlIO_flush(f); PerlIOBase(f)->flags &= ~(PERLIO_F_CANREAD | PERLIO_F_CANWRITE | PERLIO_F_OPEN); while (PerlIOValid(n)) { const PerlIO_funcs * const tab = PerlIOBase(n)->tab; if (tab && tab->Close) { if ((*tab->Close)(aTHX_ n) != 0) code = -1; break; } else { PerlIOBase(n)->flags &= ~(PERLIO_F_CANREAD | PERLIO_F_CANWRITE | PERLIO_F_OPEN); } n = PerlIONext(n); } } else { SETERRNO(EBADF, SS_IVCHAN); } return code; } IV PerlIOBase_eof(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; if (PerlIOValid(f)) { return (PerlIOBase(f)->flags & PERLIO_F_EOF) != 0; } return 1; } IV PerlIOBase_error(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; if (PerlIOValid(f)) { return (PerlIOBase(f)->flags & PERLIO_F_ERROR) != 0; } return 1; } void PerlIOBase_clearerr(pTHX_ PerlIO *f) { if (PerlIOValid(f)) { PerlIO * const n = PerlIONext(f); PerlIOBase(f)->flags &= ~(PERLIO_F_ERROR | PERLIO_F_EOF); if (PerlIOValid(n)) PerlIO_clearerr(n); } } void PerlIOBase_setlinebuf(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; if (PerlIOValid(f)) { PerlIOBase(f)->flags |= PERLIO_F_LINEBUF; } } SV * PerlIO_sv_dup(pTHX_ SV *arg, CLONE_PARAMS *param) { if (!arg) return NULL; #ifdef sv_dup if (param) { return sv_dup(arg, param); } else { return newSVsv(arg); } #else PERL_UNUSED_ARG(param); return newSVsv(arg); #endif } PerlIO * PerlIOBase_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) { PerlIO * const nexto = PerlIONext(o); if (PerlIOValid(nexto)) { const PerlIO_funcs * const tab = PerlIOBase(nexto)->tab; if (tab && tab->Dup) f = (*tab->Dup)(aTHX_ f, nexto, param, flags); else f = PerlIOBase_dup(aTHX_ f, nexto, param, flags); } if (f) { PerlIO_funcs * const self = PerlIOBase(o)->tab; SV *arg; char buf[8]; PerlIO_debug("PerlIOBase_dup %s f=%p o=%p param=%p\n", self->name, (void*)f, (void*)o, (void*)param); if (self->Getarg) arg = (*self->Getarg)(aTHX_ o, param, flags); else { arg = NULL; } f = PerlIO_push(aTHX_ f, self, PerlIO_modestr(o,buf), arg); if (arg) { SvREFCNT_dec(arg); } } return f; } #ifdef USE_THREADS perl_mutex PerlIO_mutex; #endif /* PL_perlio_fd_refcnt[] is in intrpvar.h */ /* Must be called with PerlIO_mutex locked. */ static void S_more_refcounted_fds(pTHX_ const int new_fd) { dVAR; const int old_max = PL_perlio_fd_refcnt_size; const int new_max = 16 + (new_fd & ~15); int *new_array; PerlIO_debug("More fds - old=%d, need %d, new=%d\n", old_max, new_fd, new_max); if (new_fd < old_max) { return; } assert (new_max > new_fd); new_array = PerlMemShared_realloc(PL_perlio_fd_refcnt, new_max * sizeof(int)); if (!new_array) { #ifdef USE_THREADS MUTEX_UNLOCK(&PerlIO_mutex); #endif /* Can't use PerlIO to write as it allocates memory */ PerlLIO_write(PerlIO_fileno(Perl_error_log), PL_no_mem, strlen(PL_no_mem)); my_exit(1); } PL_perlio_fd_refcnt_size = new_max; PL_perlio_fd_refcnt = new_array; PerlIO_debug("Zeroing %p, %d\n", (void*)(new_array + old_max), new_max - old_max); Zero(new_array + old_max, new_max - old_max, int); } void PerlIO_init(pTHX) { /* Place holder for stdstreams call ??? */ #ifdef USE_THREADS MUTEX_INIT(&PerlIO_mutex); #else PERL_UNUSED_CONTEXT; #endif } void PerlIOUnix_refcnt_inc(int fd) { dTHX; if (fd >= 0) { dVAR; #ifdef USE_THREADS MUTEX_LOCK(&PerlIO_mutex); #endif if (fd >= PL_perlio_fd_refcnt_size) S_more_refcounted_fds(aTHX_ fd); PL_perlio_fd_refcnt[fd]++; PerlIO_debug("fd %d refcnt=%d\n",fd,PL_perlio_fd_refcnt[fd]); #ifdef USE_THREADS MUTEX_UNLOCK(&PerlIO_mutex); #endif } } int PerlIOUnix_refcnt_dec(int fd) { dTHX; int cnt = 0; if (fd >= 0) { dVAR; #ifdef USE_THREADS MUTEX_LOCK(&PerlIO_mutex); #endif /* XXX should this be a panic? */ if (fd >= PL_perlio_fd_refcnt_size) S_more_refcounted_fds(aTHX_ fd); /* XXX should this be a panic if it drops below 0? */ cnt = --PL_perlio_fd_refcnt[fd]; PerlIO_debug("fd %d refcnt=%d\n",fd,cnt); #ifdef USE_THREADS MUTEX_UNLOCK(&PerlIO_mutex); #endif } return cnt; } void PerlIO_cleanup(pTHX) { dVAR; int i; #ifdef USE_ITHREADS PerlIO_debug("Cleanup layers for %p\n",(void*)aTHX); #else PerlIO_debug("Cleanup layers\n"); #endif /* Raise STDIN..STDERR refcount so we don't close them */ for (i=0; i < 3; i++) PerlIOUnix_refcnt_inc(i); PerlIO_cleantable(aTHX_ &PL_perlio); /* Restore STDIN..STDERR refcount */ for (i=0; i < 3; i++) PerlIOUnix_refcnt_dec(i); if (PL_known_layers) { PerlIO_list_free(aTHX_ PL_known_layers); PL_known_layers = NULL; } if (PL_def_layerlist) { PerlIO_list_free(aTHX_ PL_def_layerlist); PL_def_layerlist = NULL; } } /*--------------------------------------------------------------------------------------*/ /* * Bottom-most level for UNIX-like case */ typedef struct { struct _PerlIO base; /* The generic part */ int fd; /* UNIX like file descriptor */ int oflags; /* open/fcntl flags */ } PerlIOUnix; int PerlIOUnix_oflags(const char *mode) { int oflags = -1; if (*mode == IoTYPE_IMPLICIT || *mode == IoTYPE_NUMERIC) mode++; switch (*mode) { case 'r': oflags = O_RDONLY; if (*++mode == '+') { oflags = O_RDWR; mode++; } break; case 'w': oflags = O_CREAT | O_TRUNC; if (*++mode == '+') { oflags |= O_RDWR; mode++; } else oflags |= O_WRONLY; break; case 'a': oflags = O_CREAT | O_APPEND; if (*++mode == '+') { oflags |= O_RDWR; mode++; } else oflags |= O_WRONLY; break; } if (*mode == 'b') { oflags |= O_BINARY; oflags &= ~O_TEXT; mode++; } else if (*mode == 't') { oflags |= O_TEXT; oflags &= ~O_BINARY; mode++; } /* * Always open in binary mode */ oflags |= O_BINARY; if (*mode || oflags == -1) { SETERRNO(EINVAL, LIB_INVARG); oflags = -1; } return oflags; } IV PerlIOUnix_fileno(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; return PerlIOSelf(f, PerlIOUnix)->fd; } static void PerlIOUnix_setfd(pTHX_ PerlIO *f, int fd, int imode) { PerlIOUnix * const s = PerlIOSelf(f, PerlIOUnix); #if defined(WIN32) Stat_t st; if (PerlLIO_fstat(fd, &st) == 0) { if (!S_ISREG(st.st_mode)) { PerlIO_debug("%d is not regular file\n",fd); PerlIOBase(f)->flags |= PERLIO_F_NOTREG; } else { PerlIO_debug("%d _is_ a regular file\n",fd); } } #endif s->fd = fd; s->oflags = imode; PerlIOUnix_refcnt_inc(fd); PERL_UNUSED_CONTEXT; } IV PerlIOUnix_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { IV code = PerlIOBase_pushed(aTHX_ f, mode, arg, tab); if (*PerlIONext(f)) { /* We never call down so do any pending stuff now */ PerlIO_flush(PerlIONext(f)); /* * XXX could (or should) we retrieve the oflags from the open file * handle rather than believing the "mode" we are passed in? XXX * Should the value on NULL mode be 0 or -1? */ PerlIOUnix_setfd(aTHX_ f, PerlIO_fileno(PerlIONext(f)), mode ? PerlIOUnix_oflags(mode) : -1); } PerlIOBase(f)->flags |= PERLIO_F_OPEN; return code; } IV PerlIOUnix_seek(pTHX_ PerlIO *f, Off_t offset, int whence) { const int fd = PerlIOSelf(f, PerlIOUnix)->fd; Off_t new_loc; PERL_UNUSED_CONTEXT; if (PerlIOBase(f)->flags & PERLIO_F_NOTREG) { #ifdef ESPIPE SETERRNO(ESPIPE, LIB_INVARG); #else SETERRNO(EINVAL, LIB_INVARG); #endif return -1; } new_loc = PerlLIO_lseek(fd, offset, whence); if (new_loc == (Off_t) - 1) return -1; PerlIOBase(f)->flags &= ~PERLIO_F_EOF; return 0; } PerlIO * PerlIOUnix_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *f, int narg, SV **args) { if (PerlIOValid(f)) { if (PerlIOBase(f)->flags & PERLIO_F_OPEN) (*PerlIOBase(f)->tab->Close)(aTHX_ f); } if (narg > 0) { if (*mode == IoTYPE_NUMERIC) mode++; else { imode = PerlIOUnix_oflags(mode); perm = 0666; } if (imode != -1) { const char *path = SvPV_nolen_const(*args); fd = PerlLIO_open3(path, imode, perm); } } if (fd >= 0) { if (*mode == IoTYPE_IMPLICIT) mode++; if (!f) { f = PerlIO_allocate(aTHX); } if (!PerlIOValid(f)) { if (!(f = PerlIO_push(aTHX_ f, self, mode, PerlIOArg))) { return NULL; } } PerlIOUnix_setfd(aTHX_ f, fd, imode); PerlIOBase(f)->flags |= PERLIO_F_OPEN; if (*mode == IoTYPE_APPEND) PerlIOUnix_seek(aTHX_ f, 0, SEEK_END); return f; } else { if (f) { NOOP; /* * FIXME: pop layers ??? */ } return NULL; } } PerlIO * PerlIOUnix_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) { const PerlIOUnix * const os = PerlIOSelf(o, PerlIOUnix); int fd = os->fd; if (flags & PERLIO_DUP_FD) { fd = PerlLIO_dup(fd); } if (fd >= 0) { f = PerlIOBase_dup(aTHX_ f, o, param, flags); if (f) { /* If all went well overwrite fd in dup'ed lay with the dup()'ed fd */ PerlIOUnix_setfd(aTHX_ f, fd, os->oflags); return f; } } return NULL; } SSize_t PerlIOUnix_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { dVAR; const int fd = PerlIOSelf(f, PerlIOUnix)->fd; #ifdef PERLIO_STD_SPECIAL if (fd == 0) return PERLIO_STD_IN(fd, vbuf, count); #endif if (!(PerlIOBase(f)->flags & PERLIO_F_CANREAD) || PerlIOBase(f)->flags & (PERLIO_F_EOF|PERLIO_F_ERROR)) { return 0; } while (1) { const SSize_t len = PerlLIO_read(fd, vbuf, count); if (len >= 0 || errno != EINTR) { if (len < 0) { if (errno != EAGAIN) { PerlIOBase(f)->flags |= PERLIO_F_ERROR; } } else if (len == 0 && count != 0) { PerlIOBase(f)->flags |= PERLIO_F_EOF; SETERRNO(0,0); } return len; } PERL_ASYNC_CHECK(); } /*NOTREACHED*/ } SSize_t PerlIOUnix_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { dVAR; const int fd = PerlIOSelf(f, PerlIOUnix)->fd; #ifdef PERLIO_STD_SPECIAL if (fd == 1 || fd == 2) return PERLIO_STD_OUT(fd, vbuf, count); #endif while (1) { const SSize_t len = PerlLIO_write(fd, vbuf, count); if (len >= 0 || errno != EINTR) { if (len < 0) { if (errno != EAGAIN) { PerlIOBase(f)->flags |= PERLIO_F_ERROR; } } return len; } PERL_ASYNC_CHECK(); } /*NOTREACHED*/ } Off_t PerlIOUnix_tell(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; return PerlLIO_lseek(PerlIOSelf(f, PerlIOUnix)->fd, 0, SEEK_CUR); } IV PerlIOUnix_close(pTHX_ PerlIO *f) { dVAR; const int fd = PerlIOSelf(f, PerlIOUnix)->fd; int code = 0; if (PerlIOBase(f)->flags & PERLIO_F_OPEN) { if (PerlIOUnix_refcnt_dec(fd) > 0) { PerlIOBase(f)->flags &= ~PERLIO_F_OPEN; return 0; } } else { SETERRNO(EBADF,SS_IVCHAN); return -1; } while (PerlLIO_close(fd) != 0) { if (errno != EINTR) { code = -1; break; } PERL_ASYNC_CHECK(); } if (code == 0) { PerlIOBase(f)->flags &= ~PERLIO_F_OPEN; } return code; } PERLIO_FUNCS_DECL(PerlIO_unix) = { sizeof(PerlIO_funcs), "unix", sizeof(PerlIOUnix), PERLIO_K_RAW, PerlIOUnix_pushed, PerlIOBase_popped, PerlIOUnix_open, PerlIOBase_binmode, /* binmode */ NULL, PerlIOUnix_fileno, PerlIOUnix_dup, PerlIOUnix_read, PerlIOBase_unread, PerlIOUnix_write, PerlIOUnix_seek, PerlIOUnix_tell, PerlIOUnix_close, PerlIOBase_noop_ok, /* flush */ PerlIOBase_noop_fail, /* fill */ PerlIOBase_eof, PerlIOBase_error, PerlIOBase_clearerr, PerlIOBase_setlinebuf, NULL, /* get_base */ NULL, /* get_bufsiz */ NULL, /* get_ptr */ NULL, /* get_cnt */ NULL, /* set_ptrcnt */ }; /*--------------------------------------------------------------------------------------*/ /* * stdio as a layer */ #if defined(VMS) && !defined(STDIO_BUFFER_WRITABLE) /* perl5.8 - This ensures the last minute VMS ungetc fix is not broken by the last second glibc 2.3 fix */ #define STDIO_BUFFER_WRITABLE #endif typedef struct { struct _PerlIO base; FILE *stdio; /* The stream */ } PerlIOStdio; IV PerlIOStdio_fileno(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; if (PerlIOValid(f)) { FILE * const s = PerlIOSelf(f, PerlIOStdio)->stdio; if (s) return PerlSIO_fileno(s); } errno = EBADF; return -1; } char * PerlIOStdio_mode(const char *mode, char *tmode) { char * const ret = tmode; if (mode) { while (*mode) { *tmode++ = *mode++; } } #if defined(PERLIO_USING_CRLF) || defined(__CYGWIN__) *tmode++ = 'b'; #endif *tmode = '\0'; return ret; } IV PerlIOStdio_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PerlIO *n; if (PerlIOValid(f) && PerlIOValid(n = PerlIONext(f))) { PerlIO_funcs * const toptab = PerlIOBase(n)->tab; if (toptab == tab) { /* Top is already stdio - pop self (duplicate) and use original */ PerlIO_pop(aTHX_ f); return 0; } else { const int fd = PerlIO_fileno(n); char tmode[8]; FILE *stdio; if (fd >= 0 && (stdio = PerlSIO_fdopen(fd, mode = PerlIOStdio_mode(mode, tmode)))) { PerlIOSelf(f, PerlIOStdio)->stdio = stdio; /* We never call down so do any pending stuff now */ PerlIO_flush(PerlIONext(f)); } else { return -1; } } } return PerlIOBase_pushed(aTHX_ f, mode, arg, tab); } PerlIO * PerlIO_importFILE(FILE *stdio, const char *mode) { dTHX; PerlIO *f = NULL; if (stdio) { PerlIOStdio *s; if (!mode || !*mode) { /* We need to probe to see how we can open the stream so start with read/write and then try write and read we dup() so that we can fclose without loosing the fd. Note that the errno value set by a failing fdopen varies between stdio implementations. */ const int fd = PerlLIO_dup(fileno(stdio)); FILE *f2 = PerlSIO_fdopen(fd, (mode = "r+")); if (!f2) { f2 = PerlSIO_fdopen(fd, (mode = "w")); } if (!f2) { f2 = PerlSIO_fdopen(fd, (mode = "r")); } if (!f2) { /* Don't seem to be able to open */ PerlLIO_close(fd); return f; } fclose(f2); } if ((f = PerlIO_push(aTHX_(f = PerlIO_allocate(aTHX)), PERLIO_FUNCS_CAST(&PerlIO_stdio), mode, NULL))) { s = PerlIOSelf(f, PerlIOStdio); s->stdio = stdio; } } return f; } PerlIO * PerlIOStdio_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *f, int narg, SV **args) { char tmode[8]; if (PerlIOValid(f)) { const char * const path = SvPV_nolen_const(*args); PerlIOStdio * const s = PerlIOSelf(f, PerlIOStdio); FILE *stdio; PerlIOUnix_refcnt_dec(fileno(s->stdio)); stdio = PerlSIO_freopen(path, (mode = PerlIOStdio_mode(mode, tmode)), s->stdio); if (!s->stdio) return NULL; s->stdio = stdio; PerlIOUnix_refcnt_inc(fileno(s->stdio)); return f; } else { if (narg > 0) { const char * const path = SvPV_nolen_const(*args); if (*mode == IoTYPE_NUMERIC) { mode++; fd = PerlLIO_open3(path, imode, perm); } else { FILE *stdio; bool appended = FALSE; #ifdef __CYGWIN__ /* Cygwin wants its 'b' early. */ appended = TRUE; mode = PerlIOStdio_mode(mode, tmode); #endif stdio = PerlSIO_fopen(path, mode); if (stdio) { if (!f) { f = PerlIO_allocate(aTHX); } if (!appended) mode = PerlIOStdio_mode(mode, tmode); f = PerlIO_push(aTHX_ f, self, mode, PerlIOArg); if (f) { PerlIOSelf(f, PerlIOStdio)->stdio = stdio; PerlIOUnix_refcnt_inc(fileno(stdio)); } else { PerlSIO_fclose(stdio); } return f; } else { return NULL; } } } if (fd >= 0) { FILE *stdio = NULL; int init = 0; if (*mode == IoTYPE_IMPLICIT) { init = 1; mode++; } if (init) { switch (fd) { case 0: stdio = PerlSIO_stdin; break; case 1: stdio = PerlSIO_stdout; break; case 2: stdio = PerlSIO_stderr; break; } } else { stdio = PerlSIO_fdopen(fd, mode = PerlIOStdio_mode(mode, tmode)); } if (stdio) { if (!f) { f = PerlIO_allocate(aTHX); } if ((f = PerlIO_push(aTHX_ f, self, mode, PerlIOArg))) { PerlIOSelf(f, PerlIOStdio)->stdio = stdio; PerlIOUnix_refcnt_inc(fileno(stdio)); } return f; } } } return NULL; } PerlIO * PerlIOStdio_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) { /* This assumes no layers underneath - which is what happens, but is not how I remember it. NI-S 2001/10/16 */ if ((f = PerlIOBase_dup(aTHX_ f, o, param, flags))) { FILE *stdio = PerlIOSelf(o, PerlIOStdio)->stdio; const int fd = fileno(stdio); char mode[8]; if (flags & PERLIO_DUP_FD) { const int dfd = PerlLIO_dup(fileno(stdio)); if (dfd >= 0) { stdio = PerlSIO_fdopen(dfd, PerlIO_modestr(o,mode)); goto set_this; } else { NOOP; /* FIXME: To avoid messy error recovery if dup fails re-use the existing stdio as though flag was not set */ } } stdio = PerlSIO_fdopen(fd, PerlIO_modestr(o,mode)); set_this: PerlIOSelf(f, PerlIOStdio)->stdio = stdio; PerlIOUnix_refcnt_inc(fileno(stdio)); } return f; } static int PerlIOStdio_invalidate_fileno(pTHX_ FILE *f) { PERL_UNUSED_CONTEXT; /* XXX this could use PerlIO_canset_fileno() and * PerlIO_set_fileno() support from Configure */ # if defined(__UCLIBC__) /* uClibc must come before glibc because it defines __GLIBC__ as well. */ f->__filedes = -1; return 1; # elif defined(__GLIBC__) /* There may be a better way for GLIBC: - libio.h defines a flag to not close() on cleanup */ f->_fileno = -1; return 1; # elif defined(__sun__) return 0; # elif defined(__hpux) f->__fileH = 0xff; f->__fileL = 0xff; return 1; /* Next one ->_file seems to be a reasonable fallback, i.e. if your platform does not have special entry try this one. [For OSF only have confirmation for Tru64 (alpha) but assume other OSFs will be similar.] */ # elif defined(_AIX) || defined(__osf__) || defined(__irix__) f->_file = -1; return 1; # elif defined(__FreeBSD__) /* There may be a better way on FreeBSD: - we could insert a dummy func in the _close function entry f->_close = (int (*)(void *)) dummy_close; */ f->_file = -1; return 1; # elif defined(__OpenBSD__) /* There may be a better way on OpenBSD: - we could insert a dummy func in the _close function entry f->_close = (int (*)(void *)) dummy_close; */ f->_file = -1; return 1; # elif defined(__EMX__) /* f->_flags &= ~_IOOPEN; */ /* Will leak stream->_buffer */ f->_handle = -1; return 1; # elif defined(__CYGWIN__) /* There may be a better way on CYGWIN: - we could insert a dummy func in the _close function entry f->_close = (int (*)(void *)) dummy_close; */ f->_file = -1; return 1; # elif defined(WIN32) # if defined(__BORLANDC__) f->fd = PerlLIO_dup(fileno(f)); # elif defined(UNDER_CE) /* WIN_CE does not have access to FILE internals, it hardly has FILE structure at all */ # else f->_file = -1; # endif return 1; # else #if 0 /* Sarathy's code did this - we fall back to a dup/dup2 hack (which isn't thread safe) instead */ # error "Don't know how to set FILE.fileno on your platform" #endif PERL_UNUSED_ARG(f); return 0; # endif } IV PerlIOStdio_close(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; if (!stdio) { errno = EBADF; return -1; } else { const int fd = fileno(stdio); int invalidate = 0; IV result = 0; int saveerr = 0; int dupfd = 0; #ifdef SOCKS5_VERSION_NAME /* Socks lib overrides close() but stdio isn't linked to that library (though we are) - so we must call close() on sockets on stdio's behalf. */ int optval; Sock_size_t optlen = sizeof(int); if (getsockopt(fd, SOL_SOCKET, SO_TYPE, (void *) &optval, &optlen) == 0) invalidate = 1; #endif if (PerlIOUnix_refcnt_dec(fd) > 0) /* File descriptor still in use */ invalidate = 1; if (invalidate) { /* For STD* handles, don't close stdio, since we shared the FILE *, too. */ if (stdio == stdin) /* Some stdios are buggy fflush-ing inputs */ return 0; if (stdio == stdout || stdio == stderr) return PerlIO_flush(f); /* Tricky - must fclose(stdio) to free memory but not close(fd) Use Sarathy's trick from maint-5.6 to invalidate the fileno slot of the FILE * */ result = PerlIO_flush(f); saveerr = errno; invalidate = PerlIOStdio_invalidate_fileno(aTHX_ stdio); if (!invalidate) dupfd = PerlLIO_dup(fd); } result = PerlSIO_fclose(stdio); /* We treat error from stdio as success if we invalidated errno may NOT be expected EBADF */ if (invalidate && result != 0) { errno = saveerr; result = 0; } #ifdef SOCKS5_VERSION_NAME /* in SOCKS' case, let close() determine return value */ result = close(fd); #endif if (dupfd) { PerlLIO_dup2(dupfd,fd); PerlLIO_close(dupfd); } return result; } } SSize_t PerlIOStdio_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { dVAR; FILE * const s = PerlIOSelf(f, PerlIOStdio)->stdio; SSize_t got = 0; for (;;) { if (count == 1) { STDCHAR *buf = (STDCHAR *) vbuf; /* * Perl is expecting PerlIO_getc() to fill the buffer Linux's * stdio does not do that for fread() */ const int ch = PerlSIO_fgetc(s); if (ch != EOF) { *buf = ch; got = 1; } } else got = PerlSIO_fread(vbuf, 1, count, s); if (got == 0 && PerlSIO_ferror(s)) got = -1; if (got >= 0 || errno != EINTR) break; PERL_ASYNC_CHECK(); SETERRNO(0,0); /* just in case */ } return got; } SSize_t PerlIOStdio_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { SSize_t unread = 0; FILE * const s = PerlIOSelf(f, PerlIOStdio)->stdio; #ifdef STDIO_BUFFER_WRITABLE if (PerlIO_fast_gets(f) && PerlIO_has_base(f)) { STDCHAR *buf = ((STDCHAR *) vbuf) + count; STDCHAR *base = PerlIO_get_base(f); SSize_t cnt = PerlIO_get_cnt(f); STDCHAR *ptr = PerlIO_get_ptr(f); SSize_t avail = ptr - base; if (avail > 0) { if (avail > count) { avail = count; } ptr -= avail; Move(buf-avail,ptr,avail,STDCHAR); count -= avail; unread += avail; PerlIO_set_ptrcnt(f,ptr,cnt+avail); if (PerlSIO_feof(s) && unread >= 0) PerlSIO_clearerr(s); } } else #endif if (PerlIO_has_cntptr(f)) { /* We can get pointer to buffer but not its base Do ungetc() but check chars are ending up in the buffer */ STDCHAR *eptr = (STDCHAR*)PerlSIO_get_ptr(s); STDCHAR *buf = ((STDCHAR *) vbuf) + count; while (count > 0) { const int ch = *--buf & 0xFF; if (ungetc(ch,s) != ch) { /* ungetc did not work */ break; } if ((STDCHAR*)PerlSIO_get_ptr(s) != --eptr || ((*eptr & 0xFF) != ch)) { /* Did not change pointer as expected */ fgetc(s); /* get char back again */ break; } /* It worked ! */ count--; unread++; } } if (count > 0) { unread += PerlIOBase_unread(aTHX_ f, vbuf, count); } return unread; } SSize_t PerlIOStdio_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { dVAR; SSize_t got; for (;;) { got = PerlSIO_fwrite(vbuf, 1, count, PerlIOSelf(f, PerlIOStdio)->stdio); if (got >= 0 || errno != EINTR) break; PERL_ASYNC_CHECK(); SETERRNO(0,0); /* just in case */ } return got; } IV PerlIOStdio_seek(pTHX_ PerlIO *f, Off_t offset, int whence) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; PERL_UNUSED_CONTEXT; return PerlSIO_fseek(stdio, offset, whence); } Off_t PerlIOStdio_tell(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; PERL_UNUSED_CONTEXT; return PerlSIO_ftell(stdio); } IV PerlIOStdio_flush(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; PERL_UNUSED_CONTEXT; if (PerlIOBase(f)->flags & PERLIO_F_CANWRITE) { return PerlSIO_fflush(stdio); } else { NOOP; #if 0 /* * FIXME: This discards ungetc() and pre-read stuff which is not * right if this is just a "sync" from a layer above Suspect right * design is to do _this_ but not have layer above flush this * layer read-to-read */ /* * Not writeable - sync by attempting a seek */ const int err = errno; if (PerlSIO_fseek(stdio, (Off_t) 0, SEEK_CUR) != 0) errno = err; #endif } return 0; } IV PerlIOStdio_eof(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; return PerlSIO_feof(PerlIOSelf(f, PerlIOStdio)->stdio); } IV PerlIOStdio_error(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; return PerlSIO_ferror(PerlIOSelf(f, PerlIOStdio)->stdio); } void PerlIOStdio_clearerr(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; PerlSIO_clearerr(PerlIOSelf(f, PerlIOStdio)->stdio); } void PerlIOStdio_setlinebuf(pTHX_ PerlIO *f) { PERL_UNUSED_CONTEXT; #ifdef HAS_SETLINEBUF PerlSIO_setlinebuf(PerlIOSelf(f, PerlIOStdio)->stdio); #else PerlSIO_setvbuf(PerlIOSelf(f, PerlIOStdio)->stdio, NULL, _IOLBF, 0); #endif } #ifdef FILE_base STDCHAR * PerlIOStdio_get_base(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; return (STDCHAR*)PerlSIO_get_base(stdio); } Size_t PerlIOStdio_get_bufsiz(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; return PerlSIO_get_bufsiz(stdio); } #endif #ifdef USE_STDIO_PTR STDCHAR * PerlIOStdio_get_ptr(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; return (STDCHAR*)PerlSIO_get_ptr(stdio); } SSize_t PerlIOStdio_get_cnt(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; return PerlSIO_get_cnt(stdio); } void PerlIOStdio_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; if (ptr != NULL) { #ifdef STDIO_PTR_LVALUE PerlSIO_set_ptr(stdio, (void*)ptr); /* LHS STDCHAR* cast non-portable */ #ifdef STDIO_PTR_LVAL_SETS_CNT if (PerlSIO_get_cnt(stdio) != (cnt)) { assert(PerlSIO_get_cnt(stdio) == (cnt)); } #endif #if (!defined(STDIO_PTR_LVAL_NOCHANGE_CNT)) /* * Setting ptr _does_ change cnt - we are done */ return; #endif #else /* STDIO_PTR_LVALUE */ PerlProc_abort(); #endif /* STDIO_PTR_LVALUE */ } /* * Now (or only) set cnt */ #ifdef STDIO_CNT_LVALUE PerlSIO_set_cnt(stdio, cnt); #else /* STDIO_CNT_LVALUE */ #if (defined(STDIO_PTR_LVALUE) && defined(STDIO_PTR_LVAL_SETS_CNT)) PerlSIO_set_ptr(stdio, PerlSIO_get_ptr(stdio) + (PerlSIO_get_cnt(stdio) - cnt)); #else /* STDIO_PTR_LVAL_SETS_CNT */ PerlProc_abort(); #endif /* STDIO_PTR_LVAL_SETS_CNT */ #endif /* STDIO_CNT_LVALUE */ } #endif IV PerlIOStdio_fill(pTHX_ PerlIO *f) { FILE * const stdio = PerlIOSelf(f, PerlIOStdio)->stdio; int c; PERL_UNUSED_CONTEXT; /* * fflush()ing read-only streams can cause trouble on some stdio-s */ if ((PerlIOBase(f)->flags & PERLIO_F_CANWRITE)) { if (PerlSIO_fflush(stdio) != 0) return EOF; } c = PerlSIO_fgetc(stdio); if (c == EOF) return EOF; #if (defined(STDIO_PTR_LVALUE) && (defined(STDIO_CNT_LVALUE) || defined(STDIO_PTR_LVAL_SETS_CNT))) #ifdef STDIO_BUFFER_WRITABLE if (PerlIO_fast_gets(f) && PerlIO_has_base(f)) { /* Fake ungetc() to the real buffer in case system's ungetc goes elsewhere */ STDCHAR *base = (STDCHAR*)PerlSIO_get_base(stdio); SSize_t cnt = PerlSIO_get_cnt(stdio); STDCHAR *ptr = (STDCHAR*)PerlSIO_get_ptr(stdio); if (ptr == base+1) { *--ptr = (STDCHAR) c; PerlIOStdio_set_ptrcnt(aTHX_ f,ptr,cnt+1); if (PerlSIO_feof(stdio)) PerlSIO_clearerr(stdio); return 0; } } else #endif if (PerlIO_has_cntptr(f)) { STDCHAR ch = c; if (PerlIOStdio_unread(aTHX_ f,&ch,1) == 1) { return 0; } } #endif #if defined(VMS) /* An ungetc()d char is handled separately from the regular * buffer, so we stuff it in the buffer ourselves. * Should never get called as should hit code above */ *(--((*stdio)->_ptr)) = (unsigned char) c; (*stdio)->_cnt++; #else /* If buffer snoop scheme above fails fall back to using ungetc(). */ if (PerlSIO_ungetc(c, stdio) != c) return EOF; #endif return 0; } PERLIO_FUNCS_DECL(PerlIO_stdio) = { sizeof(PerlIO_funcs), "stdio", sizeof(PerlIOStdio), PERLIO_K_BUFFERED|PERLIO_K_RAW, PerlIOStdio_pushed, PerlIOBase_popped, PerlIOStdio_open, PerlIOBase_binmode, /* binmode */ NULL, PerlIOStdio_fileno, PerlIOStdio_dup, PerlIOStdio_read, PerlIOStdio_unread, PerlIOStdio_write, PerlIOStdio_seek, PerlIOStdio_tell, PerlIOStdio_close, PerlIOStdio_flush, PerlIOStdio_fill, PerlIOStdio_eof, PerlIOStdio_error, PerlIOStdio_clearerr, PerlIOStdio_setlinebuf, #ifdef FILE_base PerlIOStdio_get_base, PerlIOStdio_get_bufsiz, #else NULL, NULL, #endif #ifdef USE_STDIO_PTR PerlIOStdio_get_ptr, PerlIOStdio_get_cnt, # if defined(HAS_FAST_STDIO) && defined(USE_FAST_STDIO) PerlIOStdio_set_ptrcnt, # else NULL, # endif /* HAS_FAST_STDIO && USE_FAST_STDIO */ #else NULL, NULL, NULL, #endif /* USE_STDIO_PTR */ }; /* Note that calls to PerlIO_exportFILE() are reversed using * PerlIO_releaseFILE(), not importFILE. */ FILE * PerlIO_exportFILE(PerlIO * f, const char *mode) { dTHX; FILE *stdio = NULL; if (PerlIOValid(f)) { char buf[8]; PerlIO_flush(f); if (!mode || !*mode) { mode = PerlIO_modestr(f, buf); } stdio = PerlSIO_fdopen(PerlIO_fileno(f), mode); if (stdio) { PerlIOl *l = *f; PerlIO *f2; /* De-link any lower layers so new :stdio sticks */ *f = NULL; if ((f2 = PerlIO_push(aTHX_ f, PERLIO_FUNCS_CAST(&PerlIO_stdio), buf, NULL))) { PerlIOStdio *s = PerlIOSelf((f = f2), PerlIOStdio); s->stdio = stdio; /* Link previous lower layers under new one */ *PerlIONext(f) = l; } else { /* restore layers list */ *f = l; } } } return stdio; } FILE * PerlIO_findFILE(PerlIO *f) { PerlIOl *l = *f; while (l) { if (l->tab == &PerlIO_stdio) { PerlIOStdio *s = PerlIOSelf(&l, PerlIOStdio); return s->stdio; } l = *PerlIONext(&l); } /* Uses fallback "mode" via PerlIO_modestr() in PerlIO_exportFILE */ return PerlIO_exportFILE(f, NULL); } /* Use this to reverse PerlIO_exportFILE calls. */ void PerlIO_releaseFILE(PerlIO *p, FILE *f) { dVAR; PerlIOl *l; while ((l = *p)) { if (l->tab == &PerlIO_stdio) { PerlIOStdio *s = PerlIOSelf(&l, PerlIOStdio); if (s->stdio == f) { dTHX; PerlIO_pop(aTHX_ p); return; } } p = PerlIONext(p); } return; } /*--------------------------------------------------------------------------------------*/ /* * perlio buffer layer */ IV PerlIOBuf_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { PerlIOBuf *b = PerlIOSelf(f, PerlIOBuf); const int fd = PerlIO_fileno(f); if (fd >= 0 && PerlLIO_isatty(fd)) { PerlIOBase(f)->flags |= PERLIO_F_LINEBUF | PERLIO_F_TTY; } if (*PerlIONext(f)) { const Off_t posn = PerlIO_tell(PerlIONext(f)); if (posn != (Off_t) - 1) { b->posn = posn; } } return PerlIOBase_pushed(aTHX_ f, mode, arg, tab); } PerlIO * PerlIOBuf_open(pTHX_ PerlIO_funcs *self, PerlIO_list_t *layers, IV n, const char *mode, int fd, int imode, int perm, PerlIO *f, int narg, SV **args) { if (PerlIOValid(f)) { PerlIO *next = PerlIONext(f); PerlIO_funcs *tab = PerlIO_layer_fetch(aTHX_ layers, n - 1, PerlIOBase(next)->tab); if (tab && tab->Open) next = (*tab->Open)(aTHX_ tab, layers, n - 1, mode, fd, imode, perm, next, narg, args); if (!next || (*PerlIOBase(f)->tab->Pushed) (aTHX_ f, mode, PerlIOArg, self) != 0) { return NULL; } } else { PerlIO_funcs *tab = PerlIO_layer_fetch(aTHX_ layers, n - 1, PerlIO_default_btm()); int init = 0; if (*mode == IoTYPE_IMPLICIT) { init = 1; /* * mode++; */ } if (tab && tab->Open) f = (*tab->Open)(aTHX_ tab, layers, n - 1, mode, fd, imode, perm, f, narg, args); else SETERRNO(EINVAL, LIB_INVARG); if (f) { if (PerlIO_push(aTHX_ f, self, mode, PerlIOArg) == 0) { /* * if push fails during open, open fails. close will pop us. */ PerlIO_close (f); return NULL; } else { fd = PerlIO_fileno(f); if (init && fd == 2) { /* * Initial stderr is unbuffered */ PerlIOBase(f)->flags |= PERLIO_F_UNBUF; } #ifdef PERLIO_USING_CRLF # ifdef PERLIO_IS_BINMODE_FD if (PERLIO_IS_BINMODE_FD(fd)) PerlIO_binmode(aTHX_ f, '<'/*not used*/, O_BINARY, NULL); else # endif /* * do something about failing setmode()? --jhi */ PerlLIO_setmode(fd, O_BINARY); #endif } } } return f; } /* * This "flush" is akin to sfio's sync in that it handles files in either * read or write state. For write state, we put the postponed data through * the next layers. For read state, we seek() the next layers to the * offset given by current position in the buffer, and discard the buffer * state (XXXX supposed to be for seek()able buffers only, but now it is done * in any case?). Then the pass the stick further in chain. */ IV PerlIOBuf_flush(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); int code = 0; PerlIO *n = PerlIONext(f); if (PerlIOBase(f)->flags & PERLIO_F_WRBUF) { /* * write() the buffer */ const STDCHAR *buf = b->buf; const STDCHAR *p = buf; while (p < b->ptr) { SSize_t count = PerlIO_write(n, p, b->ptr - p); if (count > 0) { p += count; } else if (count < 0 || PerlIO_error(n)) { PerlIOBase(f)->flags |= PERLIO_F_ERROR; code = -1; break; } } b->posn += (p - buf); } else if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { STDCHAR *buf = PerlIO_get_base(f); /* * Note position change */ b->posn += (b->ptr - buf); if (b->ptr < b->end) { /* We did not consume all of it - try and seek downstream to our logical position */ if (PerlIOValid(n) && PerlIO_seek(n, b->posn, SEEK_SET) == 0) { /* Reload n as some layers may pop themselves on seek */ b->posn = PerlIO_tell(n = PerlIONext(f)); } else { /* Seek failed (e.g. pipe or tty). Do NOT clear buffer or pre-read data is lost for good - so return saying "ok" having undone the position adjust */ b->posn -= (b->ptr - buf); return code; } } } b->ptr = b->end = b->buf; PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF); /* We check for Valid because of dubious decision to make PerlIO_flush(NULL) flush all */ if (PerlIOValid(n) && PerlIO_flush(n) != 0) code = -1; return code; } /* This discards the content of the buffer after b->ptr, and rereads * the buffer from the position off in the layer downstream; here off * is at offset corresponding to b->ptr - b->buf. */ IV PerlIOBuf_fill(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); PerlIO *n = PerlIONext(f); SSize_t avail; /* * Down-stream flush is defined not to loose read data so is harmless. * we would not normally be fill'ing if there was data left in anycase. */ if (PerlIO_flush(f) != 0) /* XXXX Check that its seek() succeeded?! */ return -1; if (PerlIOBase(f)->flags & PERLIO_F_TTY) PerlIOBase_flush_linebuf(aTHX); if (!b->buf) PerlIO_get_base(f); /* allocate via vtable */ assert(b->buf); /* The b->buf does get allocated via the vtable system. */ b->ptr = b->end = b->buf; if (!PerlIOValid(n)) { PerlIOBase(f)->flags |= PERLIO_F_EOF; return -1; } if (PerlIO_fast_gets(n)) { /* * Layer below is also buffered. We do _NOT_ want to call its * ->Read() because that will loop till it gets what we asked for * which may hang on a pipe etc. Instead take anything it has to * hand, or ask it to fill _once_. */ avail = PerlIO_get_cnt(n); if (avail <= 0) { avail = PerlIO_fill(n); if (avail == 0) avail = PerlIO_get_cnt(n); else { if (!PerlIO_error(n) && PerlIO_eof(n)) avail = 0; } } if (avail > 0) { STDCHAR *ptr = PerlIO_get_ptr(n); const SSize_t cnt = avail; if (avail > (SSize_t)b->bufsiz) avail = b->bufsiz; Copy(ptr, b->buf, avail, STDCHAR); PerlIO_set_ptrcnt(n, ptr + avail, cnt - avail); } } else { avail = PerlIO_read(n, b->ptr, b->bufsiz); } if (avail <= 0) { if (avail == 0) PerlIOBase(f)->flags |= PERLIO_F_EOF; else PerlIOBase(f)->flags |= PERLIO_F_ERROR; return -1; } b->end = b->buf + avail; PerlIOBase(f)->flags |= PERLIO_F_RDBUF; return 0; } SSize_t PerlIOBuf_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { if (PerlIOValid(f)) { const PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->ptr) PerlIO_get_base(f); return PerlIOBase_read(aTHX_ f, vbuf, count); } return 0; } SSize_t PerlIOBuf_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { const STDCHAR *buf = (const STDCHAR *) vbuf + count; PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); SSize_t unread = 0; SSize_t avail; if (PerlIOBase(f)->flags & PERLIO_F_WRBUF) PerlIO_flush(f); if (!b->buf) PerlIO_get_base(f); if (b->buf) { if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { /* * Buffer is already a read buffer, we can overwrite any chars * which have been read back to buffer start */ avail = (b->ptr - b->buf); } else { /* * Buffer is idle, set it up so whole buffer is available for * unread */ avail = b->bufsiz; b->end = b->buf + avail; b->ptr = b->end; PerlIOBase(f)->flags |= PERLIO_F_RDBUF; /* * Buffer extends _back_ from where we are now */ b->posn -= b->bufsiz; } if (avail > (SSize_t) count) { /* * If we have space for more than count, just move count */ avail = count; } if (avail > 0) { b->ptr -= avail; buf -= avail; /* * In simple stdio-like ungetc() case chars will be already * there */ if (buf != b->ptr) { Copy(buf, b->ptr, avail, STDCHAR); } count -= avail; unread += avail; PerlIOBase(f)->flags &= ~PERLIO_F_EOF; } } if (count > 0) { unread += PerlIOBase_unread(aTHX_ f, vbuf, count); } return unread; } SSize_t PerlIOBuf_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); const STDCHAR *buf = (const STDCHAR *) vbuf; const STDCHAR *flushptr = buf; Size_t written = 0; if (!b->buf) PerlIO_get_base(f); if (!(PerlIOBase(f)->flags & PERLIO_F_CANWRITE)) return 0; if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { if (PerlIO_flush(f) != 0) { return 0; } } if (PerlIOBase(f)->flags & PERLIO_F_LINEBUF) { flushptr = buf + count; while (flushptr > buf && *(flushptr - 1) != '\n') --flushptr; } while (count > 0) { SSize_t avail = b->bufsiz - (b->ptr - b->buf); if ((SSize_t) count < avail) avail = count; if (flushptr > buf && flushptr <= buf + avail) avail = flushptr - buf; PerlIOBase(f)->flags |= PERLIO_F_WRBUF; if (avail) { Copy(buf, b->ptr, avail, STDCHAR); count -= avail; buf += avail; written += avail; b->ptr += avail; if (buf == flushptr) PerlIO_flush(f); } if (b->ptr >= (b->buf + b->bufsiz)) PerlIO_flush(f); } if (PerlIOBase(f)->flags & PERLIO_F_UNBUF) PerlIO_flush(f); return written; } IV PerlIOBuf_seek(pTHX_ PerlIO *f, Off_t offset, int whence) { IV code; if ((code = PerlIO_flush(f)) == 0) { PerlIOBase(f)->flags &= ~PERLIO_F_EOF; code = PerlIO_seek(PerlIONext(f), offset, whence); if (code == 0) { PerlIOBuf *b = PerlIOSelf(f, PerlIOBuf); b->posn = PerlIO_tell(PerlIONext(f)); } } return code; } Off_t PerlIOBuf_tell(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); /* * b->posn is file position where b->buf was read, or will be written */ Off_t posn = b->posn; if ((PerlIOBase(f)->flags & PERLIO_F_APPEND) && (PerlIOBase(f)->flags & PERLIO_F_WRBUF)) { #if 1 /* As O_APPEND files are normally shared in some sense it is better to flush : */ PerlIO_flush(f); #else /* when file is NOT shared then this is sufficient */ PerlIO_seek(PerlIONext(f),0, SEEK_END); #endif posn = b->posn = PerlIO_tell(PerlIONext(f)); } if (b->buf) { /* * If buffer is valid adjust position by amount in buffer */ posn += (b->ptr - b->buf); } return posn; } IV PerlIOBuf_popped(pTHX_ PerlIO *f) { const IV code = PerlIOBase_popped(aTHX_ f); PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (b->buf && b->buf != (STDCHAR *) & b->oneword) { Safefree(b->buf); } b->ptr = b->end = b->buf = NULL; PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF); return code; } IV PerlIOBuf_close(pTHX_ PerlIO *f) { const IV code = PerlIOBase_close(aTHX_ f); PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (b->buf && b->buf != (STDCHAR *) & b->oneword) { Safefree(b->buf); } b->ptr = b->end = b->buf = NULL; PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF); return code; } STDCHAR * PerlIOBuf_get_ptr(pTHX_ PerlIO *f) { const PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->buf) PerlIO_get_base(f); return b->ptr; } SSize_t PerlIOBuf_get_cnt(pTHX_ PerlIO *f) { const PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->buf) PerlIO_get_base(f); if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) return (b->end - b->ptr); return 0; } STDCHAR * PerlIOBuf_get_base(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); PERL_UNUSED_CONTEXT; if (!b->buf) { if (!b->bufsiz) b->bufsiz = 4096; b->buf = Newxz(b->buf,b->bufsiz, STDCHAR); if (!b->buf) { b->buf = (STDCHAR *) & b->oneword; b->bufsiz = sizeof(b->oneword); } b->end = b->ptr = b->buf; } return b->buf; } Size_t PerlIOBuf_bufsiz(pTHX_ PerlIO *f) { const PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->buf) PerlIO_get_base(f); return (b->end - b->buf); } void PerlIOBuf_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->buf) PerlIO_get_base(f); b->ptr = ptr; if (PerlIO_get_cnt(f) != cnt || b->ptr < b->buf) { assert(PerlIO_get_cnt(f) == cnt); assert(b->ptr >= b->buf); } PerlIOBase(f)->flags |= PERLIO_F_RDBUF; } PerlIO * PerlIOBuf_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) { return PerlIOBase_dup(aTHX_ f, o, param, flags); } PERLIO_FUNCS_DECL(PerlIO_perlio) = { sizeof(PerlIO_funcs), "perlio", sizeof(PerlIOBuf), PERLIO_K_BUFFERED|PERLIO_K_RAW, PerlIOBuf_pushed, PerlIOBuf_popped, PerlIOBuf_open, PerlIOBase_binmode, /* binmode */ NULL, PerlIOBase_fileno, PerlIOBuf_dup, PerlIOBuf_read, PerlIOBuf_unread, PerlIOBuf_write, PerlIOBuf_seek, PerlIOBuf_tell, PerlIOBuf_close, PerlIOBuf_flush, PerlIOBuf_fill, PerlIOBase_eof, PerlIOBase_error, PerlIOBase_clearerr, PerlIOBase_setlinebuf, PerlIOBuf_get_base, PerlIOBuf_bufsiz, PerlIOBuf_get_ptr, PerlIOBuf_get_cnt, PerlIOBuf_set_ptrcnt, }; /*--------------------------------------------------------------------------------------*/ /* * Temp layer to hold unread chars when cannot do it any other way */ IV PerlIOPending_fill(pTHX_ PerlIO *f) { /* * Should never happen */ PerlIO_flush(f); return 0; } IV PerlIOPending_close(pTHX_ PerlIO *f) { /* * A tad tricky - flush pops us, then we close new top */ PerlIO_flush(f); return PerlIO_close(f); } IV PerlIOPending_seek(pTHX_ PerlIO *f, Off_t offset, int whence) { /* * A tad tricky - flush pops us, then we seek new top */ PerlIO_flush(f); return PerlIO_seek(f, offset, whence); } IV PerlIOPending_flush(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (b->buf && b->buf != (STDCHAR *) & b->oneword) { Safefree(b->buf); b->buf = NULL; } PerlIO_pop(aTHX_ f); return 0; } void PerlIOPending_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt) { if (cnt <= 0) { PerlIO_flush(f); } else { PerlIOBuf_set_ptrcnt(aTHX_ f, ptr, cnt); } } IV PerlIOPending_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { const IV code = PerlIOBase_pushed(aTHX_ f, mode, arg, tab); PerlIOl * const l = PerlIOBase(f); /* * Our PerlIO_fast_gets must match what we are pushed on, or sv_gets() * etc. get muddled when it changes mid-string when we auto-pop. */ l->flags = (l->flags & ~(PERLIO_F_FASTGETS | PERLIO_F_UTF8)) | (PerlIOBase(PerlIONext(f))-> flags & (PERLIO_F_FASTGETS | PERLIO_F_UTF8)); return code; } SSize_t PerlIOPending_read(pTHX_ PerlIO *f, void *vbuf, Size_t count) { SSize_t avail = PerlIO_get_cnt(f); SSize_t got = 0; if ((SSize_t)count < avail) avail = count; if (avail > 0) got = PerlIOBuf_read(aTHX_ f, vbuf, avail); if (got >= 0 && got < (SSize_t)count) { const SSize_t more = PerlIO_read(f, ((STDCHAR *) vbuf) + got, count - got); if (more >= 0 || got == 0) got += more; } return got; } PERLIO_FUNCS_DECL(PerlIO_pending) = { sizeof(PerlIO_funcs), "pending", sizeof(PerlIOBuf), PERLIO_K_BUFFERED|PERLIO_K_RAW, /* not sure about RAW here */ PerlIOPending_pushed, PerlIOBuf_popped, NULL, PerlIOBase_binmode, /* binmode */ NULL, PerlIOBase_fileno, PerlIOBuf_dup, PerlIOPending_read, PerlIOBuf_unread, PerlIOBuf_write, PerlIOPending_seek, PerlIOBuf_tell, PerlIOPending_close, PerlIOPending_flush, PerlIOPending_fill, PerlIOBase_eof, PerlIOBase_error, PerlIOBase_clearerr, PerlIOBase_setlinebuf, PerlIOBuf_get_base, PerlIOBuf_bufsiz, PerlIOBuf_get_ptr, PerlIOBuf_get_cnt, PerlIOPending_set_ptrcnt, }; /*--------------------------------------------------------------------------------------*/ /* * crlf - translation On read translate CR,LF to "\n" we do this by * overriding ptr/cnt entries to hand back a line at a time and keeping a * record of which nl we "lied" about. On write translate "\n" to CR,LF * * c->nl points on the first byte of CR LF pair when it is temporarily * replaced by LF, or to the last CR of the buffer. In the former case * the caller thinks that the buffer ends at c->nl + 1, in the latter * that it ends at c->nl; these two cases can be distinguished by * *c->nl. c->nl is set during _getcnt() call, and unset during * _unread() and _flush() calls. * It only matters for read operations. */ typedef struct { PerlIOBuf base; /* PerlIOBuf stuff */ STDCHAR *nl; /* Position of crlf we "lied" about in the * buffer */ } PerlIOCrlf; IV PerlIOCrlf_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab) { IV code; PerlIOBase(f)->flags |= PERLIO_F_CRLF; code = PerlIOBuf_pushed(aTHX_ f, mode, arg, tab); #if 0 PerlIO_debug("PerlIOCrlf_pushed f=%p %s %s fl=%08" UVxf "\n", f, PerlIOBase(f)->tab->name, (mode) ? mode : "(Null)", PerlIOBase(f)->flags); #endif { /* Enable the first CRLF capable layer you can find, but if none * found, the one we just pushed is fine. This results in at * any given moment at most one CRLF-capable layer being enabled * in the whole layer stack. */ PerlIO *g = PerlIONext(f); while (g && *g) { PerlIOl *b = PerlIOBase(g); if (b && b->tab == &PerlIO_crlf) { if (!(b->flags & PERLIO_F_CRLF)) b->flags |= PERLIO_F_CRLF; PerlIO_pop(aTHX_ f); return code; } g = PerlIONext(g); } } return code; } SSize_t PerlIOCrlf_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf); if (c->nl) { /* XXXX Shouldn't it be done only if b->ptr > c->nl? */ *(c->nl) = 0xd; c->nl = NULL; } if (!(PerlIOBase(f)->flags & PERLIO_F_CRLF)) return PerlIOBuf_unread(aTHX_ f, vbuf, count); else { const STDCHAR *buf = (const STDCHAR *) vbuf + count; PerlIOBuf *b = PerlIOSelf(f, PerlIOBuf); SSize_t unread = 0; if (PerlIOBase(f)->flags & PERLIO_F_WRBUF) PerlIO_flush(f); if (!b->buf) PerlIO_get_base(f); if (b->buf) { if (!(PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { b->end = b->ptr = b->buf + b->bufsiz; PerlIOBase(f)->flags |= PERLIO_F_RDBUF; b->posn -= b->bufsiz; } while (count > 0 && b->ptr > b->buf) { const int ch = *--buf; if (ch == '\n') { if (b->ptr - 2 >= b->buf) { *--(b->ptr) = 0xa; *--(b->ptr) = 0xd; unread++; count--; } else { /* If b->ptr - 1 == b->buf, we are undoing reading 0xa */ *--(b->ptr) = 0xa; /* Works even if 0xa == '\r' */ unread++; count--; } } else { *--(b->ptr) = ch; unread++; count--; } } } return unread; } } /* XXXX This code assumes that buffer size >=2, but does not check it... */ SSize_t PerlIOCrlf_get_cnt(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); if (!b->buf) PerlIO_get_base(f); if (PerlIOBase(f)->flags & PERLIO_F_RDBUF) { PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf); if ((PerlIOBase(f)->flags & PERLIO_F_CRLF) && (!c->nl || *c->nl == 0xd)) { STDCHAR *nl = (c->nl) ? c->nl : b->ptr; scan: while (nl < b->end && *nl != 0xd) nl++; if (nl < b->end && *nl == 0xd) { test: if (nl + 1 < b->end) { if (nl[1] == 0xa) { *nl = '\n'; c->nl = nl; } else { /* * Not CR,LF but just CR */ nl++; goto scan; } } else { /* * Blast - found CR as last char in buffer */ if (b->ptr < nl) { /* * They may not care, defer work as long as * possible */ c->nl = nl; return (nl - b->ptr); } else { int code; b->ptr++; /* say we have read it as far as * flush() is concerned */ b->buf++; /* Leave space in front of buffer */ /* Note as we have moved buf up flush's posn += ptr-buf will naturally make posn point at CR */ b->bufsiz--; /* Buffer is thus smaller */ code = PerlIO_fill(f); /* Fetch some more */ b->bufsiz++; /* Restore size for next time */ b->buf--; /* Point at space */ b->ptr = nl = b->buf; /* Which is what we hand * off */ *nl = 0xd; /* Fill in the CR */ if (code == 0) goto test; /* fill() call worked */ /* * CR at EOF - just fall through */ /* Should we clear EOF though ??? */ } } } } return (((c->nl) ? (c->nl + 1) : b->end) - b->ptr); } return 0; } void PerlIOCrlf_set_ptrcnt(pTHX_ PerlIO *f, STDCHAR * ptr, SSize_t cnt) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf); if (!b->buf) PerlIO_get_base(f); if (!ptr) { if (c->nl) { ptr = c->nl + 1; if (ptr == b->end && *c->nl == 0xd) { /* Defered CR at end of buffer case - we lied about count */ ptr--; } } else { ptr = b->end; } ptr -= cnt; } else { NOOP; #if 0 /* * Test code - delete when it works ... */ IV flags = PerlIOBase(f)->flags; STDCHAR *chk = (c->nl) ? (c->nl+1) : b->end; if (ptr+cnt == c->nl && c->nl+1 == b->end && *c->nl == 0xd) { /* Defered CR at end of buffer case - we lied about count */ chk--; } chk -= cnt; if (ptr != chk ) { Perl_croak(aTHX_ "ptr wrong %p != %p fl=%08" UVxf " nl=%p e=%p for %d", ptr, chk, flags, c->nl, b->end, cnt); } #endif } if (c->nl) { if (ptr > c->nl) { /* * They have taken what we lied about */ *(c->nl) = 0xd; c->nl = NULL; ptr++; } } b->ptr = ptr; PerlIOBase(f)->flags |= PERLIO_F_RDBUF; } SSize_t PerlIOCrlf_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { if (!(PerlIOBase(f)->flags & PERLIO_F_CRLF)) return PerlIOBuf_write(aTHX_ f, vbuf, count); else { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); const STDCHAR *buf = (const STDCHAR *) vbuf; const STDCHAR * const ebuf = buf + count; if (!b->buf) PerlIO_get_base(f); if (!(PerlIOBase(f)->flags & PERLIO_F_CANWRITE)) return 0; while (buf < ebuf) { const STDCHAR * const eptr = b->buf + b->bufsiz; PerlIOBase(f)->flags |= PERLIO_F_WRBUF; while (buf < ebuf && b->ptr < eptr) { if (*buf == '\n') { if ((b->ptr + 2) > eptr) { /* * Not room for both */ PerlIO_flush(f); break; } else { *(b->ptr)++ = 0xd; /* CR */ *(b->ptr)++ = 0xa; /* LF */ buf++; if (PerlIOBase(f)->flags & PERLIO_F_LINEBUF) { PerlIO_flush(f); break; } } } else { *(b->ptr)++ = *buf++; } if (b->ptr >= eptr) { PerlIO_flush(f); break; } } } if (PerlIOBase(f)->flags & PERLIO_F_UNBUF) PerlIO_flush(f); return (buf - (STDCHAR *) vbuf); } } IV PerlIOCrlf_flush(pTHX_ PerlIO *f) { PerlIOCrlf * const c = PerlIOSelf(f, PerlIOCrlf); if (c->nl) { *(c->nl) = 0xd; c->nl = NULL; } return PerlIOBuf_flush(aTHX_ f); } IV PerlIOCrlf_binmode(pTHX_ PerlIO *f) { if ((PerlIOBase(f)->flags & PERLIO_F_CRLF)) { /* In text mode - flush any pending stuff and flip it */ PerlIOBase(f)->flags &= ~PERLIO_F_CRLF; #ifndef PERLIO_USING_CRLF /* CRLF is unusual case - if this is just the :crlf layer pop it */ if (PerlIOBase(f)->tab == &PerlIO_crlf) { PerlIO_pop(aTHX_ f); } #endif } return 0; } PERLIO_FUNCS_DECL(PerlIO_crlf) = { sizeof(PerlIO_funcs), "crlf", sizeof(PerlIOCrlf), PERLIO_K_BUFFERED | PERLIO_K_CANCRLF | PERLIO_K_RAW, PerlIOCrlf_pushed, PerlIOBuf_popped, /* popped */ PerlIOBuf_open, PerlIOCrlf_binmode, /* binmode */ NULL, PerlIOBase_fileno, PerlIOBuf_dup, PerlIOBuf_read, /* generic read works with ptr/cnt lies */ PerlIOCrlf_unread, /* Put CR,LF in buffer for each '\n' */ PerlIOCrlf_write, /* Put CR,LF in buffer for each '\n' */ PerlIOBuf_seek, PerlIOBuf_tell, PerlIOBuf_close, PerlIOCrlf_flush, PerlIOBuf_fill, PerlIOBase_eof, PerlIOBase_error, PerlIOBase_clearerr, PerlIOBase_setlinebuf, PerlIOBuf_get_base, PerlIOBuf_bufsiz, PerlIOBuf_get_ptr, PerlIOCrlf_get_cnt, PerlIOCrlf_set_ptrcnt, }; #ifdef HAS_MMAP /*--------------------------------------------------------------------------------------*/ /* * mmap as "buffer" layer */ typedef struct { PerlIOBuf base; /* PerlIOBuf stuff */ Mmap_t mptr; /* Mapped address */ Size_t len; /* mapped length */ STDCHAR *bbuf; /* malloced buffer if map fails */ } PerlIOMmap; IV PerlIOMmap_map(pTHX_ PerlIO *f) { dVAR; PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); const IV flags = PerlIOBase(f)->flags; IV code = 0; if (m->len) abort(); if (flags & PERLIO_F_CANREAD) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); const int fd = PerlIO_fileno(f); Stat_t st; code = Fstat(fd, &st); if (code == 0 && S_ISREG(st.st_mode)) { SSize_t len = st.st_size - b->posn; if (len > 0) { Off_t posn; if (PL_mmap_page_size <= 0) Perl_croak(aTHX_ "panic: bad pagesize %" IVdf, PL_mmap_page_size); if (b->posn < 0) { /* * This is a hack - should never happen - open should * have set it ! */ b->posn = PerlIO_tell(PerlIONext(f)); } posn = (b->posn / PL_mmap_page_size) * PL_mmap_page_size; len = st.st_size - posn; m->mptr = mmap(NULL, len, PROT_READ, MAP_SHARED, fd, posn); if (m->mptr && m->mptr != (Mmap_t) - 1) { #if 0 && defined(HAS_MADVISE) && defined(MADV_SEQUENTIAL) madvise(m->mptr, len, MADV_SEQUENTIAL); #endif #if 0 && defined(HAS_MADVISE) && defined(MADV_WILLNEED) madvise(m->mptr, len, MADV_WILLNEED); #endif PerlIOBase(f)->flags = (flags & ~PERLIO_F_EOF) | PERLIO_F_RDBUF; b->end = ((STDCHAR *) m->mptr) + len; b->buf = ((STDCHAR *) m->mptr) + (b->posn - posn); b->ptr = b->buf; m->len = len; } else { b->buf = NULL; } } else { PerlIOBase(f)->flags = flags | PERLIO_F_EOF | PERLIO_F_RDBUF; b->buf = NULL; b->ptr = b->end = b->ptr; code = -1; } } } return code; } IV PerlIOMmap_unmap(pTHX_ PerlIO *f) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); IV code = 0; if (m->len) { PerlIOBuf * const b = &m->base; if (b->buf) { code = munmap(m->mptr, m->len); b->buf = NULL; m->len = 0; m->mptr = NULL; if (PerlIO_seek(PerlIONext(f), b->posn, SEEK_SET) != 0) code = -1; } b->ptr = b->end = b->buf; PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF); } return code; } STDCHAR * PerlIOMmap_get_base(pTHX_ PerlIO *f) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); PerlIOBuf * const b = &m->base; if (b->buf && (PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { /* * Already have a readbuffer in progress */ return b->buf; } if (b->buf) { /* * We have a write buffer or flushed PerlIOBuf read buffer */ m->bbuf = b->buf; /* save it in case we need it again */ b->buf = NULL; /* Clear to trigger below */ } if (!b->buf) { PerlIOMmap_map(aTHX_ f); /* Try and map it */ if (!b->buf) { /* * Map did not work - recover PerlIOBuf buffer if we have one */ b->buf = m->bbuf; } } b->ptr = b->end = b->buf; if (b->buf) return b->buf; return PerlIOBuf_get_base(aTHX_ f); } SSize_t PerlIOMmap_unread(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); PerlIOBuf * const b = &m->base; if (PerlIOBase(f)->flags & PERLIO_F_WRBUF) PerlIO_flush(f); if (b->ptr && (b->ptr - count) >= b->buf && memEQ(b->ptr - count, vbuf, count)) { b->ptr -= count; PerlIOBase(f)->flags &= ~PERLIO_F_EOF; return count; } if (m->len) { /* * Loose the unwritable mapped buffer */ PerlIO_flush(f); /* * If flush took the "buffer" see if we have one from before */ if (!b->buf && m->bbuf) b->buf = m->bbuf; if (!b->buf) { PerlIOBuf_get_base(aTHX_ f); m->bbuf = b->buf; } } return PerlIOBuf_unread(aTHX_ f, vbuf, count); } SSize_t PerlIOMmap_write(pTHX_ PerlIO *f, const void *vbuf, Size_t count) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); PerlIOBuf * const b = &m->base; if (!b->buf || !(PerlIOBase(f)->flags & PERLIO_F_WRBUF)) { /* * No, or wrong sort of, buffer */ if (m->len) { if (PerlIOMmap_unmap(aTHX_ f) != 0) return 0; } /* * If unmap took the "buffer" see if we have one from before */ if (!b->buf && m->bbuf) b->buf = m->bbuf; if (!b->buf) { PerlIOBuf_get_base(aTHX_ f); m->bbuf = b->buf; } } return PerlIOBuf_write(aTHX_ f, vbuf, count); } IV PerlIOMmap_flush(pTHX_ PerlIO *f) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); PerlIOBuf * const b = &m->base; IV code = PerlIOBuf_flush(aTHX_ f); /* * Now we are "synced" at PerlIOBuf level */ if (b->buf) { if (m->len) { /* * Unmap the buffer */ if (PerlIOMmap_unmap(aTHX_ f) != 0) code = -1; } else { /* * We seem to have a PerlIOBuf buffer which was not mapped * remember it in case we need one later */ m->bbuf = b->buf; } } return code; } IV PerlIOMmap_fill(pTHX_ PerlIO *f) { PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf); IV code = PerlIO_flush(f); if (code == 0 && !b->buf) { code = PerlIOMmap_map(aTHX_ f); } if (code == 0 && !(PerlIOBase(f)->flags & PERLIO_F_RDBUF)) { code = PerlIOBuf_fill(aTHX_ f); } return code; } IV PerlIOMmap_close(pTHX_ PerlIO *f) { PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap); PerlIOBuf * const b = &m->base; IV code = PerlIO_flush(f); if (m->bbuf) { b->buf = m->bbuf; m->bbuf = NULL; b->ptr = b->end = b->buf; } if (PerlIOBuf_close(aTHX_ f) != 0) code = -1; return code; } PerlIO * PerlIOMmap_dup(pTHX_ PerlIO *f, PerlIO *o, CLONE_PARAMS *param, int flags) { return PerlIOBase_dup(aTHX_ f, o, param, flags); } PERLIO_FUNCS_DECL(PerlIO_mmap) = { sizeof(PerlIO_funcs), "mmap", sizeof(PerlIOMmap), PERLIO_K_BUFFERED|PERLIO_K_RAW, PerlIOBuf_pushed, PerlIOBuf_popped, PerlIOBuf_open, PerlIOBase_binmode, /* binmode */ NULL, PerlIOBase_fileno, PerlIOMmap_dup, PerlIOBuf_read, PerlIOMmap_unread, PerlIOMmap_write, PerlIOBuf_seek, PerlIOBuf_tell, PerlIOBuf_close, PerlIOMmap_flush, PerlIOMmap_fill, PerlIOBase_eof, PerlIOBase_error, PerlIOBase_clearerr, PerlIOBase_setlinebuf, PerlIOMmap_get_base, PerlIOBuf_bufsiz, PerlIOBuf_get_ptr, PerlIOBuf_get_cnt, PerlIOBuf_set_ptrcnt, }; #endif /* HAS_MMAP */ PerlIO * Perl_PerlIO_stdin(pTHX) { dVAR; if (!PL_perlio) { PerlIO_stdstreams(aTHX); } return &PL_perlio[1]; } PerlIO * Perl_PerlIO_stdout(pTHX) { dVAR; if (!PL_perlio) { PerlIO_stdstreams(aTHX); } return &PL_perlio[2]; } PerlIO * Perl_PerlIO_stderr(pTHX) { dVAR; if (!PL_perlio) { PerlIO_stdstreams(aTHX); } return &PL_perlio[3]; } /*--------------------------------------------------------------------------------------*/ char * PerlIO_getname(PerlIO *f, char *buf) { dTHX; #ifdef VMS char *name = NULL; bool exported = FALSE; FILE *stdio = PerlIOSelf(f, PerlIOStdio)->stdio; if (!stdio) { stdio = PerlIO_exportFILE(f,0); exported = TRUE; } if (stdio) { name = fgetname(stdio, buf); if (exported) PerlIO_releaseFILE(f,stdio); } return name; #else PERL_UNUSED_ARG(f); PERL_UNUSED_ARG(buf); Perl_croak(aTHX_ "Don't know how to get file name"); return NULL; #endif } /*--------------------------------------------------------------------------------------*/ /* * Functions which can be called on any kind of PerlIO implemented in * terms of above */ #undef PerlIO_fdopen PerlIO * PerlIO_fdopen(int fd, const char *mode) { dTHX; return PerlIO_openn(aTHX_ NULL, mode, fd, 0, 0, NULL, 0, NULL); } #undef PerlIO_open PerlIO * PerlIO_open(const char *path, const char *mode) { dTHX; SV *name = sv_2mortal(newSVpv(path, 0)); return PerlIO_openn(aTHX_ NULL, mode, -1, 0, 0, NULL, 1, &name); } #undef Perlio_reopen PerlIO * PerlIO_reopen(const char *path, const char *mode, PerlIO *f) { dTHX; SV *name = sv_2mortal(newSVpv(path,0)); return PerlIO_openn(aTHX_ NULL, mode, -1, 0, 0, f, 1, &name); } #undef PerlIO_getc int PerlIO_getc(PerlIO *f) { dTHX; STDCHAR buf[1]; if ( 1 == PerlIO_read(f, buf, 1) ) { return (unsigned char) buf[0]; } return EOF; } #undef PerlIO_ungetc int PerlIO_ungetc(PerlIO *f, int ch) { dTHX; if (ch != EOF) { STDCHAR buf = ch; if (PerlIO_unread(f, &buf, 1) == 1) return ch; } return EOF; } #undef PerlIO_putc int PerlIO_putc(PerlIO *f, int ch) { dTHX; STDCHAR buf = ch; return PerlIO_write(f, &buf, 1); } #undef PerlIO_puts int PerlIO_puts(PerlIO *f, const char *s) { dTHX; return PerlIO_write(f, s, strlen(s)); } #undef PerlIO_rewind void PerlIO_rewind(PerlIO *f) { dTHX; PerlIO_seek(f, (Off_t) 0, SEEK_SET); PerlIO_clearerr(f); } #undef PerlIO_vprintf int PerlIO_vprintf(PerlIO *f, const char *fmt, va_list ap) { dTHX; SV * const sv = newSVpvs(""); const char *s; STRLEN len; SSize_t wrote; #ifdef NEED_VA_COPY va_list apc; Perl_va_copy(ap, apc); sv_vcatpvf(sv, fmt, &apc); #else sv_vcatpvf(sv, fmt, &ap); #endif s = SvPV_const(sv, len); wrote = PerlIO_write(f, s, len); SvREFCNT_dec(sv); return wrote; } #undef PerlIO_printf int PerlIO_printf(PerlIO *f, const char *fmt, ...) { va_list ap; int result; va_start(ap, fmt); result = PerlIO_vprintf(f, fmt, ap); va_end(ap); return result; } #undef PerlIO_stdoutf int PerlIO_stdoutf(const char *fmt, ...) { dTHX; va_list ap; int result; va_start(ap, fmt); result = PerlIO_vprintf(PerlIO_stdout(), fmt, ap); va_end(ap); return result; } #undef PerlIO_tmpfile PerlIO * PerlIO_tmpfile(void) { dTHX; PerlIO *f = NULL; #ifdef WIN32 const int fd = win32_tmpfd(); if (fd >= 0) f = PerlIO_fdopen(fd, "w+b"); #else /* WIN32 */ # if defined(HAS_MKSTEMP) && ! defined(VMS) && ! defined(OS2) SV * const sv = newSVpvs("/tmp/PerlIO_XXXXXX"); /* * I have no idea how portable mkstemp() is ... NI-S */ const int fd = mkstemp(SvPVX(sv)); if (fd >= 0) { f = PerlIO_fdopen(fd, "w+"); if (f) PerlIOBase(f)->flags |= PERLIO_F_TEMP; PerlLIO_unlink(SvPVX_const(sv)); SvREFCNT_dec(sv); } # else /* !HAS_MKSTEMP, fallback to stdio tmpfile(). */ FILE * const stdio = PerlSIO_tmpfile(); if (stdio) { if ((f = PerlIO_push(aTHX_(PerlIO_allocate(aTHX)), PERLIO_FUNCS_CAST(&PerlIO_stdio), "w+", NULL))) { PerlIOStdio * const s = PerlIOSelf(f, PerlIOStdio); if (s) s->stdio = stdio; } } # endif /* else HAS_MKSTEMP */ #endif /* else WIN32 */ return f; } #undef HAS_FSETPOS #undef HAS_FGETPOS #endif /* USE_SFIO */ #endif /* PERLIO_IS_STDIO */ /*======================================================================================*/ /* * Now some functions in terms of above which may be needed even if we are * not in true PerlIO mode */ const char * Perl_PerlIO_context_layers(pTHX_ const char *mode) { dVAR; const char *type = NULL; /* * Need to supply default layer info from open.pm */ if (PL_curcop && PL_curcop->cop_hints & HINT_LEXICAL_IO) { SV * const layers = Perl_refcounted_he_fetch(aTHX_ PL_curcop->cop_hints_hash, 0, "open", 4, 0, 0); assert(layers); if (SvOK(layers)) { STRLEN len; type = SvPV_const(layers, len); if (type && mode && mode[0] != 'r') { /* * Skip to write part, which is separated by a '\0' */ STRLEN read_len = strlen(type); if (read_len < len) { type += read_len + 1; } } } } return type; } #ifndef HAS_FSETPOS #undef PerlIO_setpos int PerlIO_setpos(PerlIO *f, SV *pos) { dTHX; if (SvOK(pos)) { STRLEN len; const Off_t * const posn = (Off_t *) SvPV(pos, len); if (f && len == sizeof(Off_t)) return PerlIO_seek(f, *posn, SEEK_SET); } SETERRNO(EINVAL, SS_IVCHAN); return -1; } #else #undef PerlIO_setpos int PerlIO_setpos(PerlIO *f, SV *pos) { dTHX; if (SvOK(pos)) { STRLEN len; Fpos_t * const fpos = (Fpos_t *) SvPV(pos, len); if (f && len == sizeof(Fpos_t)) { #if defined(USE_64_BIT_STDIO) && defined(USE_FSETPOS64) return fsetpos64(f, fpos); #else return fsetpos(f, fpos); #endif } } SETERRNO(EINVAL, SS_IVCHAN); return -1; } #endif #ifndef HAS_FGETPOS #undef PerlIO_getpos int PerlIO_getpos(PerlIO *f, SV *pos) { dTHX; Off_t posn = PerlIO_tell(f); sv_setpvn(pos, (char *) &posn, sizeof(posn)); return (posn == (Off_t) - 1) ? -1 : 0; } #else #undef PerlIO_getpos int PerlIO_getpos(PerlIO *f, SV *pos) { dTHX; Fpos_t fpos; int code; #if defined(USE_64_BIT_STDIO) && defined(USE_FSETPOS64) code = fgetpos64(f, &fpos); #else code = fgetpos(f, &fpos); #endif sv_setpvn(pos, (char *) &fpos, sizeof(fpos)); return code; } #endif #if (defined(PERLIO_IS_STDIO) || !defined(USE_SFIO)) && !defined(HAS_VPRINTF) int vprintf(char *pat, char *args) { _doprnt(pat, args, stdout); return 0; /* wrong, but perl doesn't use the return * value */ } int vfprintf(FILE *fd, char *pat, char *args) { _doprnt(pat, args, fd); return 0; /* wrong, but perl doesn't use the return * value */ } #endif #ifndef PerlIO_vsprintf int PerlIO_vsprintf(char *s, int n, const char *fmt, va_list ap) { dTHX; const int val = my_vsnprintf(s, n > 0 ? n : 0, fmt, ap); #ifndef PERL_MY_VSNPRINTF_GUARDED if (val < 0 || (n > 0 ? val >= n : 0)) { Perl_croak(aTHX_ "panic: my_vsnprintf overflow in PerlIO_vsprintf\n"); } #endif return val; } #endif #ifndef PerlIO_sprintf int PerlIO_sprintf(char *s, int n, const char *fmt, ...) { va_list ap; int result; va_start(ap, fmt); result = PerlIO_vsprintf(s, n, fmt, ap); va_end(ap); return result; } #endif /* * Local variables: * c-indentation-style: bsd * c-basic-offset: 4 * indent-tabs-mode: t * End: * * ex: set ts=8 sts=4 sw=4 noet: */