=head1 NAME perllocale - Perl locale handling (internationalization and localization) =head1 DESCRIPTION Perl supports language-specific notions of data such as "is this a letter", "what is the upper-case equivalent of this letter", and "which of these letters comes first". These are important issues, especially for languages other than English - but also for English: it would be very naEve to think that C defines all the "letters". Perl is also aware that some character other than '.' may be preferred as a decimal point, and that output date representations may be language-specific. The process of making an application take account of its users' preferences in such matters is called B (often abbreviated as B); telling such an application about a particular set of preferences is known as B (B). Perl can understand language-specific data via the standardized (ISO C, XPG4, POSIX 1.c) method called "the locale system". The locale system is controlled per application using one pragma, one function call, and several environment variables. B: This feature is new in Perl 5.004, and does not apply unless an application specifically requests it - see L. The one exception is that write() now B uses the current locale - see L<"NOTES">. =head1 PREPARING TO USE LOCALES If Perl applications are to be able to understand and present your data correctly according a locale of your choice, B of the following must be true: =over 4 =item * B. If it does, you should find that the setlocale() function is a documented part of its C library. =item * B. You, or your system administrator, must make sure that this is the case. The available locales, the location in which they are kept, and the manner in which they are installed, vary from system to system. Some systems provide only a few, hard-wired, locales, and do not allow more to be added; others allow you to add "canned" locales provided by the system supplier; still others allow you or the system administrator to define and add arbitrary locales. (You may have to ask your supplier to provide canned locales which are not delivered with your operating system.) Read your system documentation for further illumination. =item * B. If it does, C will say that the value for C is C. =back If you want a Perl application to process and present your data according to a particular locale, the application code should include the S> pragma (see L) where appropriate, and B of the following must be true: =over 4 =item * B) must be correctly set up>, either by yourself, or by the person who set up your system account, at the time the application is started. =item * B using the method described in L. =back =head1 USING LOCALES =head2 The use locale pragma By default, Perl ignores the current locale. The S> pragma tells Perl to use the current locale for some operations: =over 4 =item * B (C, C, C, C, and C) and the POSIX string collation functions strcoll() and strxfrm() use C. sort() is also affected if it is used without an explicit comparison function because it uses C by default. B C and C are unaffected by the locale: they always perform a byte-by-byte comparison of their scalar operands. What's more, if C finds that its operands are equal according to the collation sequence specified by the current locale, it goes on to perform a byte-by-byte comparison, and only returns I<0> (equal) if the operands are bit-for-bit identical. If you really want to know whether two strings - which C and C may consider different - are equal as far as collation in the locale is concerned, see the discussion in L. =item * B (uc(), lc(), ucfirst(), and lcfirst()) use C =item * B (printf(), sprintf() and write()) use C =item * B (strftime()) uses C. =back C, C, and so on, are discussed further in L. The default behavior returns with S> or on reaching the end of the enclosing block. Note that the string result of any operation that uses locale information is tainted, as it is possible for a locale to be untrustworthy. See L<"SECURITY">. =head2 The setlocale function You can switch locales as often as you wish at run time with the POSIX::setlocale() function: # This functionality not usable prior to Perl 5.004 require 5.004; # Import locale-handling tool set from POSIX module. # This example uses: setlocale -- the function call # LC_CTYPE -- explained below use POSIX qw(locale_h); # query and save the old locale $old_locale = setlocale(LC_CTYPE); setlocale(LC_CTYPE, "fr_CA.ISO8859-1"); # LC_CTYPE now in locale "French, Canada, codeset ISO 8859-1" setlocale(LC_CTYPE, ""); # LC_CTYPE now reset to default defined by LC_ALL/LC_CTYPE/LANG # environment variables. See below for documentation. # restore the old locale setlocale(LC_CTYPE, $old_locale); The first argument of setlocale() gives the B, the second the B. The category tells in what aspect of data processing you want to apply locale-specific rules. Category names are discussed in L and L<"ENVIRONMENT">. The locale is the name of a collection of customization information corresponding to a particular combination of language, country or territory, and codeset. Read on for hints on the naming of locales: not all systems name locales as in the example. If no second argument is provided, the function returns a string naming the current locale for the category. You can use this value as the second argument in a subsequent call to setlocale(). If a second argument is given and it corresponds to a valid locale, the locale for the category is set to that value, and the function returns the now-current locale value. You can use this in a subsequent call to setlocale(). (In some implementations, the return value may sometimes differ from the value you gave as the second argument - think of it as an alias for the value that you gave.) As the example shows, if the second argument is an empty string, the category's locale is returned to the default specified by the corresponding environment variables. Generally, this results in a return to the default which was in force when Perl started up: changes to the environment made by the application after start-up may or may not be noticed, depending on the implementation of your system's C library. If the second argument does not correspond to a valid locale, the locale for the category is not changed, and the function returns I. For further information about the categories, consult L. For the locales available in your system, also consult L and see whether it leads you to the list of the available locales (search for the I section). If that fails, try the following command lines: locale -a nlsinfo ls /usr/lib/nls/loc ls /usr/lib/locale ls /usr/lib/nls and see whether they list something resembling these en_US.ISO8859-1 de_DE.ISO8859-1 ru_RU.ISO8859-5 en_US de_DE ru_RU en de ru english german russian english.iso88591 german.iso88591 russian.iso88595 Sadly, even though the calling interface for setlocale() has been standardized, the names of the locales and the directories where the configuration is, have not. The basic form of the name is IB<.>I, but the latter parts are not always present. Two special locales are worth particular mention: "C" and "POSIX". Currently these are effectively the same locale: the difference is mainly that the first one is defined by the C standard and the second by the POSIX standard. What they define is the B in which every program starts in the absence of locale information in its environment. (The default default locale, if you will.) Its language is (American) English and its character codeset ASCII. B: Not all systems have the "POSIX" locale (not all systems are POSIX-conformant), so use "C" when you need explicitly to specify this default locale. =head2 The localeconv function The POSIX::localeconv() function allows you to get particulars of the locale-dependent numeric formatting information specified by the current C and C locales. (If you just want the name of the current locale for a particular category, use POSIX::setlocale() with a single parameter - see L.) use POSIX qw(locale_h); # Get a reference to a hash of locale-dependent info $locale_values = localeconv(); # Output sorted list of the values for (sort keys %$locale_values) { printf "%-20s = %s\n", $_, $locale_values->{$_} } localeconv() takes no arguments, and returns B a hash. The keys of this hash are formatting variable names such as C and C; the values are the corresponding values. See L for a longer example, which lists all the categories an implementation might be expected to provide; some provide more and others fewer, however. Note that you don't need C: as a function with the job of querying the locale, localeconv() always observes the current locale. Here's a simple-minded example program which rewrites its command line parameters as integers formatted correctly in the current locale: # See comments in previous example require 5.004; use POSIX qw(locale_h); # Get some of locale's numeric formatting parameters my ($thousands_sep, $grouping) = @{localeconv()}{'thousands_sep', 'grouping'}; # Apply defaults if values are missing $thousands_sep = ',' unless $thousands_sep; $grouping = 3 unless $grouping; # Format command line params for current locale for (@ARGV) { $_ = int; # Chop non-integer part 1 while s/(\d)(\d{$grouping}($|$thousands_sep))/$1$thousands_sep$2/; print "$_"; } print "\n"; =head1 LOCALE CATEGORIES The subsections which follow describe basic locale categories. As well as these, there are some combination categories which allow the manipulation of more than one basic category at a time. See L<"ENVIRONMENT"> for a discussion of these. =head2 Category LC_COLLATE: Collation When in the scope of S>, Perl looks to the C environment variable to determine the application's notions on the collation (ordering) of characters. ('b' follows 'a' in Latin alphabets, but where do 'E' and 'E' belong?) Here is a code snippet that will tell you what are the alphanumeric characters in the current locale, in the locale order: use locale; print +(sort grep /\w/, map { chr() } 0..255), "\n"; Compare this with the characters that you see and their order if you state explicitly that the locale should be ignored: no locale; print +(sort grep /\w/, map { chr() } 0..255), "\n"; This machine-native collation (which is what you get unless S> has appeared earlier in the same block) must be used for sorting raw binary data, whereas the locale-dependent collation of the first example is useful for natural text. As noted in L, C compares according to the current collation locale when C is in effect, but falls back to a byte-by-byte comparison for strings which the locale says are equal. You can use POSIX::strcoll() if you don't want this fall-back: use POSIX qw(strcoll); $equal_in_locale = !strcoll("space and case ignored", "SpaceAndCaseIgnored"); $equal_in_locale will be true if the collation locale specifies a dictionary-like ordering which ignores space characters completely, and which folds case. If you have a single string which you want to check for "equality in locale" against several others, you might think you could gain a little efficiency by using POSIX::strxfrm() in conjunction with C: use POSIX qw(strxfrm); $xfrm_string = strxfrm("Mixed-case string"); print "locale collation ignores spaces\n" if $xfrm_string eq strxfrm("Mixed-casestring"); print "locale collation ignores hyphens\n" if $xfrm_string eq strxfrm("Mixedcase string"); print "locale collation ignores case\n" if $xfrm_string eq strxfrm("mixed-case string"); strxfrm() takes a string and maps it into a transformed string for use in byte-by-byte comparisons against other transformed strings during collation. "Under the hood", locale-affected Perl comparison operators call strxfrm() for both their operands, then do a byte-by-byte comparison of the transformed strings. By calling strxfrm() explicitly, and using a non locale-affected comparison, the example attempts to save a couple of transformations. In fact, it doesn't save anything: Perl magic (see L) creates the transformed version of a string the first time it's needed in a comparison, then keeps it around in case it's needed again. An example rewritten the easy way with C runs just about as fast. It also copes with null characters embedded in strings; if you call strxfrm() directly, it treats the first null it finds as a terminator. And don't expect the transformed strings it produces to be portable across systems - or even from one revision of your operating system to the next. In short, don't call strxfrm() directly: let Perl do it for you. Note: C isn't shown in some of these examples, as it isn't needed: strcoll() and strxfrm() exist only to generate locale-dependent results, and so always obey the current C locale. =head2 Category LC_CTYPE: Character Types When in the scope of S>, Perl obeys the C locale setting. This controls the application's notion of which characters are alphabetic. This affects Perl's C<\w> regular expression metanotation, which stands for alphanumeric characters - that is, alphabetic and numeric characters. (Consult L for more information about regular expressions.) Thanks to C, depending on your locale setting, characters like 'E', 'E', 'E', and 'E' may be understood as C<\w> characters. The C locale also provides the map used in translating characters between lower- and upper-case. This affects the case-mapping functions - lc(), lcfirst, uc() and ucfirst(); case-mapping interpolation with C<\l>, C<\L>, C<\u> or <\U> in double-quoted strings and in C substitutions; and case-independent regular expression pattern matching using the C modifier. Finally, C affects the POSIX character-class test functions - isalpha(), islower() and so on. For example, if you move from the "C" locale to a 7-bit Scandinavian one, you may find - possibly to your surprise - that "|" moves from the ispunct() class to isalpha(). B A broken or malicious C locale definition may result in clearly ineligible characters being considered to be alphanumeric by your application. For strict matching of (unaccented) letters and digits - for example, in command strings - locale-aware applications should use C<\w> inside a C block. See L<"SECURITY">. =head2 Category LC_NUMERIC: Numeric Formatting When in the scope of S>, Perl obeys the C locale information, which controls application's idea of how numbers should be formatted for human readability by the printf(), sprintf(), and write() functions. String to numeric conversion by the POSIX::strtod() function is also affected. In most implementations the only effect is to change the character used for the decimal point - perhaps from '.' to ',': these functions aren't aware of such niceties as thousands separation and so on. (See L if you care about these things.) Note that output produced by print() is B affected by the current locale: it is independent of whether C or C is in effect, and corresponds to what you'd get from printf() in the "C" locale. The same is true for Perl's internal conversions between numeric and string formats: use POSIX qw(strtod); use locale; $n = 5/2; # Assign numeric 2.5 to $n $a = " $n"; # Locale-independent conversion to string print "half five is $n\n"; # Locale-independent output printf "half five is %g\n", $n; # Locale-dependent output print "DECIMAL POINT IS COMMA\n" if $n == (strtod("2,5"))[0]; # Locale-dependent conversion =head2 Category LC_MONETARY: Formatting of monetary amounts The C standard defines the C category, but no function that is affected by its contents. (Those with experience of standards committees will recognize that the working group decided to punt on the issue.) Consequently, Perl takes no notice of it. If you really want to use C, you can query its contents - see L - and use the information that it returns in your application's own formatting of currency amounts. However, you may well find that the information, though voluminous and complex, does not quite meet your requirements: currency formatting is a hard nut to crack. =head2 LC_TIME The output produced by POSIX::strftime(), which builds a formatted human-readable date/time string, is affected by the current C locale. Thus, in a French locale, the output produced by the C<%B> format element (full month name) for the first month of the year would be "janvier". Here's how to get a list of the long month names in the current locale: use POSIX qw(strftime); for (0..11) { $long_month_name[$_] = strftime("%B", 0, 0, 0, 1, $_, 96); } Note: C isn't needed in this example: as a function which exists only to generate locale-dependent results, strftime() always obeys the current C locale. =head2 Other categories The remaining locale category, C (possibly supplemented by others in particular implementations) is not currently used by Perl - except possibly to affect the behavior of library functions called by extensions which are not part of the standard Perl distribution. =head1 SECURITY While the main discussion of Perl security issues can be found in L, a discussion of Perl's locale handling would be incomplete if it did not draw your attention to locale-dependent security issues. Locales - particularly on systems which allow unprivileged users to build their own locales - are untrustworthy. A malicious (or just plain broken) locale can make a locale-aware application give unexpected results. Here are a few possibilities: =over 4 =item * Regular expression checks for safe file names or mail addresses using C<\w> may be spoofed by an C locale which claims that characters such as "E" and "|" are alphanumeric. =item * String interpolation with case-mapping, as in, say, C<$dest = "C:\U$name.$ext">, may produce dangerous results if a bogus LC_CTYPE case-mapping table is in effect. =item * If the decimal point character in the C locale is surreptitiously changed from a dot to a comma, C produces a string result of "123,456". Many people would interpret this as one hundred and twenty-three thousand, four hundred and fifty-six. =item * A sneaky C locale could result in the names of students with "D" grades appearing ahead of those with "A"s. =item * An application which takes the trouble to use the information in C may format debits as if they were credits and vice versa if that locale has been subverted. Or it make may make payments in US dollars instead of Hong Kong dollars. =item * The date and day names in dates formatted by strftime() could be manipulated to advantage by a malicious user able to subvert the C locale. ("Look - it says I wasn't in the building on Sunday.") =back Such dangers are not peculiar to the locale system: any aspect of an application's environment which may maliciously be modified presents similar challenges. Similarly, they are not specific to Perl: any programming language which allows you to write programs which take account of their environment exposes you to these issues. Perl cannot protect you from all of the possibilities shown in the examples - there is no substitute for your own vigilance - but, when C is in effect, Perl uses the tainting mechanism (see L) to mark string results which become locale-dependent, and which may be untrustworthy in consequence. Here is a summary of the tainting behavior of operators and functions which may be affected by the locale: =over 4 =item B (C, C, C, C and C): Scalar true/false (or less/equal/greater) result is never tainted. =item B (with C<\l>, C<\L>, C<\u> or <\U>) Result string containing interpolated material is tainted if C is in effect. =item B (C): Scalar true/false result never tainted. Subpatterns, either delivered as an array-context result, or as $1 etc. are tainted if C is in effect, and the subpattern regular expression contains C<\w> (to match an alphanumeric character), C<\W> (non-alphanumeric character), C<\s> (white-space character), or C<\S> (non white-space character). The matched pattern variable, $&, $` (pre-match), $' (post-match), and $+ (last match) are also tainted if C is in effect and the regular expression contains C<\w>, C<\W>, C<\s>, or C<\S>. =item B (C): Has the same behavior as the match operator. Also, the left operand of C<=~> becomes tainted when C in effect, if it is modified as a result of a substitution based on a regular expression match involving C<\w>, C<\W>, C<\s>, or C<\S>; or of case-mapping with C<\l>, C<\L>,C<\u> or <\U>. =item B (sprintf()): Result is tainted if "use locale" is in effect. =item B (printf() and write()): Success/failure result is never tainted. =item B (lc(), lcfirst(), uc(), ucfirst()): Results are tainted if C is in effect. =item B (localeconv(), strcoll(), strftime(), strxfrm()): Results are never tainted. =item B (isalnum(), isalpha(), isdigit(), isgraph(), islower(), isprint(), ispunct(), isspace(), isupper(), isxdigit()): True/false results are never tainted. =back Three examples illustrate locale-dependent tainting. The first program, which ignores its locale, won't run: a value taken directly from the command-line may not be used to name an output file when taint checks are enabled. #/usr/local/bin/perl -T # Run with taint checking # Command-line sanity check omitted... $tainted_output_file = shift; open(F, ">$tainted_output_file") or warn "Open of $untainted_output_file failed: $!\n"; The program can be made to run by "laundering" the tainted value through a regular expression: the second example - which still ignores locale information - runs, creating the file named on its command-line if it can. #/usr/local/bin/perl -T $tainted_output_file = shift; $tainted_output_file =~ m%[\w/]+%; $untainted_output_file = $&; open(F, ">$untainted_output_file") or warn "Open of $untainted_output_file failed: $!\n"; Compare this with a very similar program which is locale-aware: #/usr/local/bin/perl -T $tainted_output_file = shift; use locale; $tainted_output_file =~ m%[\w/]+%; $localized_output_file = $&; open(F, ">$localized_output_file") or warn "Open of $localized_output_file failed: $!\n"; This third program fails to run because $& is tainted: it is the result of a match involving C<\w> when C is in effect. =head1 ENVIRONMENT =over 12 =item PERL_BADLANG A string that can suppress Perl's warning about failed locale settings at start-up. Failure can occur if the locale support in the operating system is lacking (broken) is some way - or if you mistyped the name of a locale when you set up your environment. If this environment variable is absent, or has a value which does not evaluate to integer zero - that is "0" or "" - Perl will complain about locale setting failures. B: PERL_BADLANG only gives you a way to hide the warning message. The message tells about some problem in your system's locale support, and you should investigate what the problem is. =back The following environment variables are not specific to Perl: They are part of the standardized (ISO C, XPG4, POSIX 1.c) setlocale() method for controlling an application's opinion on data. =over 12 =item LC_ALL C is the "override-all" locale environment variable. If it is set, it overrides all the rest of the locale environment variables. =item LC_CTYPE In the absence of C, C chooses the character type locale. In the absence of both C and C, C chooses the character type locale. =item LC_COLLATE In the absence of C, C chooses the collation (sorting) locale. In the absence of both C and C, C chooses the collation locale. =item LC_MONETARY In the absence of C, C chooses the monetary formatting locale. In the absence of both C and C, C chooses the monetary formatting locale. =item LC_NUMERIC In the absence of C, C chooses the numeric format locale. In the absence of both C and C, C chooses the numeric format. =item LC_TIME In the absence of C, C chooses the date and time formatting locale. In the absence of both C and C, C chooses the date and time formatting locale. =item LANG C is the "catch-all" locale environment variable. If it is set, it is used as the last resort after the overall C and the category-specific C. =back =head1 NOTES =head2 Backward compatibility Versions of Perl prior to 5.004 B ignored locale information, generally behaving as if something similar to the C<"C"> locale (see L) was always in force, even if the program environment suggested otherwise. By default, Perl still behaves this way so as to maintain backward compatibility. If you want a Perl application to pay attention to locale information, you B use the S> pragma (see L> Pragma>) to instruct it to do so. Versions of Perl from 5.002 to 5.003 did use the C information if that was available, that is, C<\w> did understand what are the letters according to the locale environment variables. The problem was that the user had no control over the feature: if the C library supported locales, Perl used them. =head2 I18N:Collate obsolete In versions of Perl prior to 5.004 per-locale collation was possible using the C library module. This module is now mildly obsolete and should be avoided in new applications. The C functionality is now integrated into the Perl core language: One can use locale-specific scalar data completely normally with C, so there is no longer any need to juggle with the scalar references of C. =head2 Sort speed and memory use impacts Comparing and sorting by locale is usually slower than the default sorting; slow-downs of two to four times have been observed. It will also consume more memory: once a Perl scalar variable has participated in any string comparison or sorting operation obeying the locale collation rules, it will take 3-15 times more memory than before. (The exact multiplier depends on the string's contents, the operating system and the locale.) These downsides are dictated more by the operating system's implementation of the locale system than by Perl. =head2 write() and LC_NUMERIC Formats are the only part of Perl which unconditionally use information from a program's locale; if a program's environment specifies an LC_NUMERIC locale, it is always used to specify the decimal point character in formatted output. Formatted output cannot be controlled by C because the pragma is tied to the block structure of the program, and, for historical reasons, formats exist outside that block structure. =head2 Freely available locale definitions There is a large collection of locale definitions at C. You should be aware that it is unsupported, and is not claimed to be fit for any purpose. If your system allows the installation of arbitrary locales, you may find the definitions useful as they are, or as a basis for the development of your own locales. =head2 I18n and l10n "Internationalization" is often abbreviated as B because its first and last letters are separated by eighteen others. (You may guess why the internalin ... internaliti ... i18n tends to get abbreviated.) In the same way, "localization" is often abbreviated to B. =head2 An imperfect standard Internationalization, as defined in the C and POSIX standards, can be criticized as incomplete, ungainly, and having too large a granularity. (Locales apply to a whole process, when it would arguably be more useful to have them apply to a single thread, window group, or whatever.) They also have a tendency, like standards groups, to divide the world into nations, when we all know that the world can equally well be divided into bankers, bikers, gamers, and so on. But, for now, it's the only standard we've got. This may be construed as a bug. =head1 BUGS =head2 Broken systems In certain system environments the operating system's locale support is broken and cannot be fixed or used by Perl. Such deficiencies can and will result in mysterious hangs and/or Perl core dumps when the C is in effect. When confronted with such a system, please report in excruciating detail to F, and complain to your vendor: maybe some bug fixes exist for these problems in your operating system. Sometimes such bug fixes are called an operating system upgrade. =head1 SEE ALSO L, L, L, L, L, L, L, L, L, L, L, L, L, L, L, L =head1 HISTORY Jarkko Hietaniemi's original F heavily hacked by Dominic Dunlop, assisted by the perl5-porters. Last update: Wed Jan 22 11:04:58 EST 1997