/* regcomp.c */ /* * 'A fair jaw-cracker dwarf-language must be.' --Samwise Gamgee * * [p.285 of _The Lord of the Rings_, II/iii: "The Ring Goes South"] */ /* This file contains functions for compiling a regular expression. See * also regexec.c which funnily enough, contains functions for executing * a regular expression. * * This file is also copied at build time to ext/re/re_comp.c, where * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT. * This causes the main functions to be compiled under new names and with * debugging support added, which makes "use re 'debug'" work. */ /* NOTE: this is derived from Henry Spencer's regexp code, and should not * confused with the original package (see point 3 below). Thanks, Henry! */ /* Additional note: this code is very heavily munged from Henry's version * in places. In some spots I've traded clarity for efficiency, so don't * blame Henry for some of the lack of readability. */ /* The names of the functions have been changed from regcomp and * regexec to pregcomp and pregexec in order to avoid conflicts * with the POSIX routines of the same names. */ #ifdef PERL_EXT_RE_BUILD #include "re_top.h" #endif /* * pregcomp and pregexec -- regsub and regerror are not used in perl * * Copyright (c) 1986 by University of Toronto. * Written by Henry Spencer. Not derived from licensed software. * * Permission is granted to anyone to use this software for any * purpose on any computer system, and to redistribute it freely, * subject to the following restrictions: * * 1. The author is not responsible for the consequences of use of * this software, no matter how awful, even if they arise * from defects in it. * * 2. The origin of this software must not be misrepresented, either * by explicit claim or by omission. * * 3. Altered versions must be plainly marked as such, and must not * be misrepresented as being the original software. * * **** Alterations to Henry's code are... **** **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 **** by Larry Wall and others **** **** You may distribute under the terms of either the GNU General Public **** License or the Artistic License, as specified in the README file. * * Beware that some of this code is subtly aware of the way operator * precedence is structured in regular expressions. Serious changes in * regular-expression syntax might require a total rethink. */ #include "EXTERN.h" #define PERL_IN_REGCOMP_C #include "perl.h" #ifndef PERL_IN_XSUB_RE # include "INTERN.h" #endif #define REG_COMP_C #ifdef PERL_IN_XSUB_RE # include "re_comp.h" extern const struct regexp_engine my_reg_engine; #else # include "regcomp.h" #endif #include "dquote_static.c" #include "charclass_invlists.h" #include "inline_invlist.c" #include "unicode_constants.h" #ifdef HAS_ISBLANK # define hasISBLANK 1 #else # define hasISBLANK 0 #endif #define HAS_NONLATIN1_FOLD_CLOSURE(i) _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i) #define IS_NON_FINAL_FOLD(c) _IS_NON_FINAL_FOLD_ONLY_FOR_USE_BY_REGCOMP_DOT_C(c) #define IS_IN_SOME_FOLD_L1(c) _IS_IN_SOME_FOLD_ONLY_FOR_USE_BY_REGCOMP_DOT_C(c) #ifdef op #undef op #endif /* op */ #ifdef MSDOS # if defined(BUGGY_MSC6) /* MSC 6.00A breaks on op/regexp.t test 85 unless we turn this off */ # pragma optimize("a",off) /* But MSC 6.00A is happy with 'w', for aliases only across function calls*/ # pragma optimize("w",on ) # endif /* BUGGY_MSC6 */ #endif /* MSDOS */ #ifndef STATIC #define STATIC static #endif typedef struct RExC_state_t { U32 flags; /* RXf_* are we folding, multilining? */ U32 pm_flags; /* PMf_* stuff from the calling PMOP */ char *precomp; /* uncompiled string. */ REGEXP *rx_sv; /* The SV that is the regexp. */ regexp *rx; /* perl core regexp structure */ regexp_internal *rxi; /* internal data for regexp object pprivate field */ char *start; /* Start of input for compile */ char *end; /* End of input for compile */ char *parse; /* Input-scan pointer. */ I32 whilem_seen; /* number of WHILEM in this expr */ regnode *emit_start; /* Start of emitted-code area */ regnode *emit_bound; /* First regnode outside of the allocated space */ regnode *emit; /* Code-emit pointer; ®dummy = don't = compiling */ I32 naughty; /* How bad is this pattern? */ I32 sawback; /* Did we see \1, ...? */ U32 seen; I32 size; /* Code size. */ I32 npar; /* Capture buffer count, (OPEN). */ I32 cpar; /* Capture buffer count, (CLOSE). */ I32 nestroot; /* root parens we are in - used by accept */ I32 extralen; I32 seen_zerolen; regnode **open_parens; /* pointers to open parens */ regnode **close_parens; /* pointers to close parens */ regnode *opend; /* END node in program */ I32 utf8; /* whether the pattern is utf8 or not */ I32 orig_utf8; /* whether the pattern was originally in utf8 */ /* XXX use this for future optimisation of case * where pattern must be upgraded to utf8. */ I32 uni_semantics; /* If a d charset modifier should use unicode rules, even if the pattern is not in utf8 */ HV *paren_names; /* Paren names */ regnode **recurse; /* Recurse regops */ I32 recurse_count; /* Number of recurse regops */ I32 in_lookbehind; I32 contains_locale; I32 override_recoding; I32 in_multi_char_class; struct reg_code_block *code_blocks; /* positions of literal (?{}) within pattern */ int num_code_blocks; /* size of code_blocks[] */ int code_index; /* next code_blocks[] slot */ #if ADD_TO_REGEXEC char *starttry; /* -Dr: where regtry was called. */ #define RExC_starttry (pRExC_state->starttry) #endif SV *runtime_code_qr; /* qr with the runtime code blocks */ #ifdef DEBUGGING const char *lastparse; I32 lastnum; AV *paren_name_list; /* idx -> name */ #define RExC_lastparse (pRExC_state->lastparse) #define RExC_lastnum (pRExC_state->lastnum) #define RExC_paren_name_list (pRExC_state->paren_name_list) #endif } RExC_state_t; #define RExC_flags (pRExC_state->flags) #define RExC_pm_flags (pRExC_state->pm_flags) #define RExC_precomp (pRExC_state->precomp) #define RExC_rx_sv (pRExC_state->rx_sv) #define RExC_rx (pRExC_state->rx) #define RExC_rxi (pRExC_state->rxi) #define RExC_start (pRExC_state->start) #define RExC_end (pRExC_state->end) #define RExC_parse (pRExC_state->parse) #define RExC_whilem_seen (pRExC_state->whilem_seen) #ifdef RE_TRACK_PATTERN_OFFSETS #define RExC_offsets (pRExC_state->rxi->u.offsets) /* I am not like the others */ #endif #define RExC_emit (pRExC_state->emit) #define RExC_emit_start (pRExC_state->emit_start) #define RExC_emit_bound (pRExC_state->emit_bound) #define RExC_naughty (pRExC_state->naughty) #define RExC_sawback (pRExC_state->sawback) #define RExC_seen (pRExC_state->seen) #define RExC_size (pRExC_state->size) #define RExC_npar (pRExC_state->npar) #define RExC_nestroot (pRExC_state->nestroot) #define RExC_extralen (pRExC_state->extralen) #define RExC_seen_zerolen (pRExC_state->seen_zerolen) #define RExC_utf8 (pRExC_state->utf8) #define RExC_uni_semantics (pRExC_state->uni_semantics) #define RExC_orig_utf8 (pRExC_state->orig_utf8) #define RExC_open_parens (pRExC_state->open_parens) #define RExC_close_parens (pRExC_state->close_parens) #define RExC_opend (pRExC_state->opend) #define RExC_paren_names (pRExC_state->paren_names) #define RExC_recurse (pRExC_state->recurse) #define RExC_recurse_count (pRExC_state->recurse_count) #define RExC_in_lookbehind (pRExC_state->in_lookbehind) #define RExC_contains_locale (pRExC_state->contains_locale) #define RExC_override_recoding (pRExC_state->override_recoding) #define RExC_in_multi_char_class (pRExC_state->in_multi_char_class) #define ISMULT1(c) ((c) == '*' || (c) == '+' || (c) == '?') #define ISMULT2(s) ((*s) == '*' || (*s) == '+' || (*s) == '?' || \ ((*s) == '{' && regcurly(s))) #ifdef SPSTART #undef SPSTART /* dratted cpp namespace... */ #endif /* * Flags to be passed up and down. */ #define WORST 0 /* Worst case. */ #define HASWIDTH 0x01 /* Known to match non-null strings. */ /* Simple enough to be STAR/PLUS operand; in an EXACTish node must be a single * character. (There needs to be a case: in the switch statement in regexec.c * for any node marked SIMPLE.) Note that this is not the same thing as * REGNODE_SIMPLE */ #define SIMPLE 0x02 #define SPSTART 0x04 /* Starts with * or + */ #define TRYAGAIN 0x08 /* Weeded out a declaration. */ #define POSTPONED 0x10 /* (?1),(?&name), (??{...}) or similar */ #define REG_NODE_NUM(x) ((x) ? (int)((x)-RExC_emit_start) : -1) /* whether trie related optimizations are enabled */ #if PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION #define TRIE_STUDY_OPT #define FULL_TRIE_STUDY #define TRIE_STCLASS #endif #define PBYTE(u8str,paren) ((U8*)(u8str))[(paren) >> 3] #define PBITVAL(paren) (1 << ((paren) & 7)) #define PAREN_TEST(u8str,paren) ( PBYTE(u8str,paren) & PBITVAL(paren)) #define PAREN_SET(u8str,paren) PBYTE(u8str,paren) |= PBITVAL(paren) #define PAREN_UNSET(u8str,paren) PBYTE(u8str,paren) &= (~PBITVAL(paren)) /* If not already in utf8, do a longjmp back to the beginning */ #define UTF8_LONGJMP 42 /* Choose a value not likely to ever conflict */ #define REQUIRE_UTF8 STMT_START { \ if (! UTF) JMPENV_JUMP(UTF8_LONGJMP); \ } STMT_END /* About scan_data_t. During optimisation we recurse through the regexp program performing various inplace (keyhole style) optimisations. In addition study_chunk and scan_commit populate this data structure with information about what strings MUST appear in the pattern. We look for the longest string that must appear at a fixed location, and we look for the longest string that may appear at a floating location. So for instance in the pattern: /FOO[xX]A.*B[xX]BAR/ Both 'FOO' and 'A' are fixed strings. Both 'B' and 'BAR' are floating strings (because they follow a .* construct). study_chunk will identify both FOO and BAR as being the longest fixed and floating strings respectively. The strings can be composites, for instance /(f)(o)(o)/ will result in a composite fixed substring 'foo'. For each string some basic information is maintained: - offset or min_offset This is the position the string must appear at, or not before. It also implicitly (when combined with minlenp) tells us how many characters must match before the string we are searching for. Likewise when combined with minlenp and the length of the string it tells us how many characters must appear after the string we have found. - max_offset Only used for floating strings. This is the rightmost point that the string can appear at. If set to I32 max it indicates that the string can occur infinitely far to the right. - minlenp A pointer to the minimum number of characters of the pattern that the string was found inside. This is important as in the case of positive lookahead or positive lookbehind we can have multiple patterns involved. Consider /(?=FOO).*F/ The minimum length of the pattern overall is 3, the minimum length of the lookahead part is 3, but the minimum length of the part that will actually match is 1. So 'FOO's minimum length is 3, but the minimum length for the F is 1. This is important as the minimum length is used to determine offsets in front of and behind the string being looked for. Since strings can be composites this is the length of the pattern at the time it was committed with a scan_commit. Note that the length is calculated by study_chunk, so that the minimum lengths are not known until the full pattern has been compiled, thus the pointer to the value. - lookbehind In the case of lookbehind the string being searched for can be offset past the start point of the final matching string. If this value was just blithely removed from the min_offset it would invalidate some of the calculations for how many chars must match before or after (as they are derived from min_offset and minlen and the length of the string being searched for). When the final pattern is compiled and the data is moved from the scan_data_t structure into the regexp structure the information about lookbehind is factored in, with the information that would have been lost precalculated in the end_shift field for the associated string. The fields pos_min and pos_delta are used to store the minimum offset and the delta to the maximum offset at the current point in the pattern. */ typedef struct scan_data_t { /*I32 len_min; unused */ /*I32 len_delta; unused */ I32 pos_min; I32 pos_delta; SV *last_found; I32 last_end; /* min value, <0 unless valid. */ I32 last_start_min; I32 last_start_max; SV **longest; /* Either &l_fixed, or &l_float. */ SV *longest_fixed; /* longest fixed string found in pattern */ I32 offset_fixed; /* offset where it starts */ I32 *minlen_fixed; /* pointer to the minlen relevant to the string */ I32 lookbehind_fixed; /* is the position of the string modfied by LB */ SV *longest_float; /* longest floating string found in pattern */ I32 offset_float_min; /* earliest point in string it can appear */ I32 offset_float_max; /* latest point in string it can appear */ I32 *minlen_float; /* pointer to the minlen relevant to the string */ I32 lookbehind_float; /* is the position of the string modified by LB */ I32 flags; I32 whilem_c; I32 *last_closep; struct regnode_charclass_class *start_class; } scan_data_t; /* * Forward declarations for pregcomp()'s friends. */ static const scan_data_t zero_scan_data = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ,0}; #define SF_BEFORE_EOL (SF_BEFORE_SEOL|SF_BEFORE_MEOL) #define SF_BEFORE_SEOL 0x0001 #define SF_BEFORE_MEOL 0x0002 #define SF_FIX_BEFORE_EOL (SF_FIX_BEFORE_SEOL|SF_FIX_BEFORE_MEOL) #define SF_FL_BEFORE_EOL (SF_FL_BEFORE_SEOL|SF_FL_BEFORE_MEOL) #ifdef NO_UNARY_PLUS # define SF_FIX_SHIFT_EOL (0+2) # define SF_FL_SHIFT_EOL (0+4) #else # define SF_FIX_SHIFT_EOL (+2) # define SF_FL_SHIFT_EOL (+4) #endif #define SF_FIX_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FIX_SHIFT_EOL) #define SF_FIX_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FIX_SHIFT_EOL) #define SF_FL_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FL_SHIFT_EOL) #define SF_FL_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FL_SHIFT_EOL) /* 0x20 */ #define SF_IS_INF 0x0040 #define SF_HAS_PAR 0x0080 #define SF_IN_PAR 0x0100 #define SF_HAS_EVAL 0x0200 #define SCF_DO_SUBSTR 0x0400 #define SCF_DO_STCLASS_AND 0x0800 #define SCF_DO_STCLASS_OR 0x1000 #define SCF_DO_STCLASS (SCF_DO_STCLASS_AND|SCF_DO_STCLASS_OR) #define SCF_WHILEM_VISITED_POS 0x2000 #define SCF_TRIE_RESTUDY 0x4000 /* Do restudy? */ #define SCF_SEEN_ACCEPT 0x8000 #define UTF cBOOL(RExC_utf8) /* The enums for all these are ordered so things work out correctly */ #define LOC (get_regex_charset(RExC_flags) == REGEX_LOCALE_CHARSET) #define DEPENDS_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_DEPENDS_CHARSET) #define UNI_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_UNICODE_CHARSET) #define AT_LEAST_UNI_SEMANTICS (get_regex_charset(RExC_flags) >= REGEX_UNICODE_CHARSET) #define ASCII_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_RESTRICTED_CHARSET) #define AT_LEAST_ASCII_RESTRICTED (get_regex_charset(RExC_flags) >= REGEX_ASCII_RESTRICTED_CHARSET) #define ASCII_FOLD_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_MORE_RESTRICTED_CHARSET) #define FOLD cBOOL(RExC_flags & RXf_PMf_FOLD) #define OOB_NAMEDCLASS -1 /* There is no code point that is out-of-bounds, so this is problematic. But * its only current use is to initialize a variable that is always set before * looked at. */ #define OOB_UNICODE 0xDEADBEEF #define CHR_SVLEN(sv) (UTF ? sv_len_utf8(sv) : SvCUR(sv)) #define CHR_DIST(a,b) (UTF ? utf8_distance(a,b) : a - b) /* length of regex to show in messages that don't mark a position within */ #define RegexLengthToShowInErrorMessages 127 /* * If MARKER[12] are adjusted, be sure to adjust the constants at the top * of t/op/regmesg.t, the tests in t/op/re_tests, and those in * op/pragma/warn/regcomp. */ #define MARKER1 "<-- HERE" /* marker as it appears in the description */ #define MARKER2 " <-- HERE " /* marker as it appears within the regex */ #define REPORT_LOCATION " in regex; marked by " MARKER1 " in m/%.*s" MARKER2 "%s/" /* * Calls SAVEDESTRUCTOR_X if needed, then calls Perl_croak with the given * arg. Show regex, up to a maximum length. If it's too long, chop and add * "...". */ #define _FAIL(code) STMT_START { \ const char *ellipses = ""; \ IV len = RExC_end - RExC_precomp; \ \ if (!SIZE_ONLY) \ SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \ if (len > RegexLengthToShowInErrorMessages) { \ /* chop 10 shorter than the max, to ensure meaning of "..." */ \ len = RegexLengthToShowInErrorMessages - 10; \ ellipses = "..."; \ } \ code; \ } STMT_END #define FAIL(msg) _FAIL( \ Perl_croak(aTHX_ "%s in regex m/%.*s%s/", \ msg, (int)len, RExC_precomp, ellipses)) #define FAIL2(msg,arg) _FAIL( \ Perl_croak(aTHX_ msg " in regex m/%.*s%s/", \ arg, (int)len, RExC_precomp, ellipses)) /* * Simple_vFAIL -- like FAIL, but marks the current location in the scan */ #define Simple_vFAIL(m) STMT_START { \ const IV offset = RExC_parse - RExC_precomp; \ Perl_croak(aTHX_ "%s" REPORT_LOCATION, \ m, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END /* * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL() */ #define vFAIL(m) STMT_START { \ if (!SIZE_ONLY) \ SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \ Simple_vFAIL(m); \ } STMT_END /* * Like Simple_vFAIL(), but accepts two arguments. */ #define Simple_vFAIL2(m,a1) STMT_START { \ const IV offset = RExC_parse - RExC_precomp; \ S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, \ (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END /* * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL2(). */ #define vFAIL2(m,a1) STMT_START { \ if (!SIZE_ONLY) \ SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \ Simple_vFAIL2(m, a1); \ } STMT_END /* * Like Simple_vFAIL(), but accepts three arguments. */ #define Simple_vFAIL3(m, a1, a2) STMT_START { \ const IV offset = RExC_parse - RExC_precomp; \ S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, \ (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END /* * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL3(). */ #define vFAIL3(m,a1,a2) STMT_START { \ if (!SIZE_ONLY) \ SAVEDESTRUCTOR_X(clear_re,(void*)RExC_rx_sv); \ Simple_vFAIL3(m, a1, a2); \ } STMT_END /* * Like Simple_vFAIL(), but accepts four arguments. */ #define Simple_vFAIL4(m, a1, a2, a3) STMT_START { \ const IV offset = RExC_parse - RExC_precomp; \ S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, a3, \ (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARNreg(loc,m) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARNregdep(loc,m) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \ m REPORT_LOCATION, \ (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARN2regdep(loc,m, a1) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \ m REPORT_LOCATION, \ a1, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARN2reg(loc, m, a1) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define vWARN3(loc, m, a1, a2) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARN3reg(loc, m, a1, a2) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define vWARN4(loc, m, a1, a2, a3) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define ckWARN4reg(loc, m, a1, a2, a3) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END #define vWARN5(loc, m, a1, a2, a3, a4) STMT_START { \ const IV offset = loc - RExC_precomp; \ Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \ a1, a2, a3, a4, (int)offset, RExC_precomp, RExC_precomp + offset); \ } STMT_END /* Allow for side effects in s */ #define REGC(c,s) STMT_START { \ if (!SIZE_ONLY) *(s) = (c); else (void)(s); \ } STMT_END /* Macros for recording node offsets. 20001227 mjd@plover.com * Nodes are numbered 1, 2, 3, 4. Node #n's position is recorded in * element 2*n-1 of the array. Element #2n holds the byte length node #n. * Element 0 holds the number n. * Position is 1 indexed. */ #ifndef RE_TRACK_PATTERN_OFFSETS #define Set_Node_Offset_To_R(node,byte) #define Set_Node_Offset(node,byte) #define Set_Cur_Node_Offset #define Set_Node_Length_To_R(node,len) #define Set_Node_Length(node,len) #define Set_Node_Cur_Length(node) #define Node_Offset(n) #define Node_Length(n) #define Set_Node_Offset_Length(node,offset,len) #define ProgLen(ri) ri->u.proglen #define SetProgLen(ri,x) ri->u.proglen = x #else #define ProgLen(ri) ri->u.offsets[0] #define SetProgLen(ri,x) ri->u.offsets[0] = x #define Set_Node_Offset_To_R(node,byte) STMT_START { \ if (! SIZE_ONLY) { \ MJD_OFFSET_DEBUG(("** (%d) offset of node %d is %d.\n", \ __LINE__, (int)(node), (int)(byte))); \ if((node) < 0) { \ Perl_croak(aTHX_ "value of node is %d in Offset macro", (int)(node)); \ } else { \ RExC_offsets[2*(node)-1] = (byte); \ } \ } \ } STMT_END #define Set_Node_Offset(node,byte) \ Set_Node_Offset_To_R((node)-RExC_emit_start, (byte)-RExC_start) #define Set_Cur_Node_Offset Set_Node_Offset(RExC_emit, RExC_parse) #define Set_Node_Length_To_R(node,len) STMT_START { \ if (! SIZE_ONLY) { \ MJD_OFFSET_DEBUG(("** (%d) size of node %d is %d.\n", \ __LINE__, (int)(node), (int)(len))); \ if((node) < 0) { \ Perl_croak(aTHX_ "value of node is %d in Length macro", (int)(node)); \ } else { \ RExC_offsets[2*(node)] = (len); \ } \ } \ } STMT_END #define Set_Node_Length(node,len) \ Set_Node_Length_To_R((node)-RExC_emit_start, len) #define Set_Cur_Node_Length(len) Set_Node_Length(RExC_emit, len) #define Set_Node_Cur_Length(node) \ Set_Node_Length(node, RExC_parse - parse_start) /* Get offsets and lengths */ #define Node_Offset(n) (RExC_offsets[2*((n)-RExC_emit_start)-1]) #define Node_Length(n) (RExC_offsets[2*((n)-RExC_emit_start)]) #define Set_Node_Offset_Length(node,offset,len) STMT_START { \ Set_Node_Offset_To_R((node)-RExC_emit_start, (offset)); \ Set_Node_Length_To_R((node)-RExC_emit_start, (len)); \ } STMT_END #endif #if PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS #define EXPERIMENTAL_INPLACESCAN #endif /*PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS*/ #define DEBUG_STUDYDATA(str,data,depth) \ DEBUG_OPTIMISE_MORE_r(if(data){ \ PerlIO_printf(Perl_debug_log, \ "%*s" str "Pos:%"IVdf"/%"IVdf \ " Flags: 0x%"UVXf" Whilem_c: %"IVdf" Lcp: %"IVdf" %s", \ (int)(depth)*2, "", \ (IV)((data)->pos_min), \ (IV)((data)->pos_delta), \ (UV)((data)->flags), \ (IV)((data)->whilem_c), \ (IV)((data)->last_closep ? *((data)->last_closep) : -1), \ is_inf ? "INF " : "" \ ); \ if ((data)->last_found) \ PerlIO_printf(Perl_debug_log, \ "Last:'%s' %"IVdf":%"IVdf"/%"IVdf" %sFixed:'%s' @ %"IVdf \ " %sFloat: '%s' @ %"IVdf"/%"IVdf"", \ SvPVX_const((data)->last_found), \ (IV)((data)->last_end), \ (IV)((data)->last_start_min), \ (IV)((data)->last_start_max), \ ((data)->longest && \ (data)->longest==&((data)->longest_fixed)) ? "*" : "", \ SvPVX_const((data)->longest_fixed), \ (IV)((data)->offset_fixed), \ ((data)->longest && \ (data)->longest==&((data)->longest_float)) ? "*" : "", \ SvPVX_const((data)->longest_float), \ (IV)((data)->offset_float_min), \ (IV)((data)->offset_float_max) \ ); \ PerlIO_printf(Perl_debug_log,"\n"); \ }); static void clear_re(pTHX_ void *r); /* Mark that we cannot extend a found fixed substring at this point. Update the longest found anchored substring and the longest found floating substrings if needed. */ STATIC void S_scan_commit(pTHX_ const RExC_state_t *pRExC_state, scan_data_t *data, I32 *minlenp, int is_inf) { const STRLEN l = CHR_SVLEN(data->last_found); const STRLEN old_l = CHR_SVLEN(*data->longest); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_SCAN_COMMIT; if ((l >= old_l) && ((l > old_l) || (data->flags & SF_BEFORE_EOL))) { SvSetMagicSV(*data->longest, data->last_found); if (*data->longest == data->longest_fixed) { data->offset_fixed = l ? data->last_start_min : data->pos_min; if (data->flags & SF_BEFORE_EOL) data->flags |= ((data->flags & SF_BEFORE_EOL) << SF_FIX_SHIFT_EOL); else data->flags &= ~SF_FIX_BEFORE_EOL; data->minlen_fixed=minlenp; data->lookbehind_fixed=0; } else { /* *data->longest == data->longest_float */ data->offset_float_min = l ? data->last_start_min : data->pos_min; data->offset_float_max = (l ? data->last_start_max : data->pos_min + data->pos_delta); if (is_inf || (U32)data->offset_float_max > (U32)I32_MAX) data->offset_float_max = I32_MAX; if (data->flags & SF_BEFORE_EOL) data->flags |= ((data->flags & SF_BEFORE_EOL) << SF_FL_SHIFT_EOL); else data->flags &= ~SF_FL_BEFORE_EOL; data->minlen_float=minlenp; data->lookbehind_float=0; } } SvCUR_set(data->last_found, 0); { SV * const sv = data->last_found; if (SvUTF8(sv) && SvMAGICAL(sv)) { MAGIC * const mg = mg_find(sv, PERL_MAGIC_utf8); if (mg) mg->mg_len = 0; } } data->last_end = -1; data->flags &= ~SF_BEFORE_EOL; DEBUG_STUDYDATA("commit: ",data,0); } /* Can match anything (initialization) */ STATIC void S_cl_anything(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl) { PERL_ARGS_ASSERT_CL_ANYTHING; ANYOF_BITMAP_SETALL(cl); cl->flags = ANYOF_CLASS|ANYOF_EOS|ANYOF_UNICODE_ALL |ANYOF_NON_UTF8_LATIN1_ALL; /* If any portion of the regex is to operate under locale rules, * initialization includes it. The reason this isn't done for all regexes * is that the optimizer was written under the assumption that locale was * all-or-nothing. Given the complexity and lack of documentation in the * optimizer, and that there are inadequate test cases for locale, so many * parts of it may not work properly, it is safest to avoid locale unless * necessary. */ if (RExC_contains_locale) { ANYOF_CLASS_SETALL(cl); /* /l uses class */ cl->flags |= ANYOF_LOCALE|ANYOF_LOC_FOLD; } else { ANYOF_CLASS_ZERO(cl); /* Only /l uses class now */ } } /* Can match anything (initialization) */ STATIC int S_cl_is_anything(const struct regnode_charclass_class *cl) { int value; PERL_ARGS_ASSERT_CL_IS_ANYTHING; for (value = 0; value <= ANYOF_MAX; value += 2) if (ANYOF_CLASS_TEST(cl, value) && ANYOF_CLASS_TEST(cl, value + 1)) return 1; if (!(cl->flags & ANYOF_UNICODE_ALL)) return 0; if (!ANYOF_BITMAP_TESTALLSET((const void*)cl)) return 0; return 1; } /* Can match anything (initialization) */ STATIC void S_cl_init(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl) { PERL_ARGS_ASSERT_CL_INIT; Zero(cl, 1, struct regnode_charclass_class); cl->type = ANYOF; cl_anything(pRExC_state, cl); ARG_SET(cl, ANYOF_NONBITMAP_EMPTY); } /* These two functions currently do the exact same thing */ #define cl_init_zero S_cl_init /* 'AND' a given class with another one. Can create false positives. 'cl' * should not be inverted. 'and_with->flags & ANYOF_CLASS' should be 0 if * 'and_with' is a regnode_charclass instead of a regnode_charclass_class. */ STATIC void S_cl_and(struct regnode_charclass_class *cl, const struct regnode_charclass_class *and_with) { PERL_ARGS_ASSERT_CL_AND; assert(and_with->type == ANYOF); /* I (khw) am not sure all these restrictions are necessary XXX */ if (!(ANYOF_CLASS_TEST_ANY_SET(and_with)) && !(ANYOF_CLASS_TEST_ANY_SET(cl)) && (and_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE) && !(and_with->flags & ANYOF_LOC_FOLD) && !(cl->flags & ANYOF_LOC_FOLD)) { int i; if (and_with->flags & ANYOF_INVERT) for (i = 0; i < ANYOF_BITMAP_SIZE; i++) cl->bitmap[i] &= ~and_with->bitmap[i]; else for (i = 0; i < ANYOF_BITMAP_SIZE; i++) cl->bitmap[i] &= and_with->bitmap[i]; } /* XXXX: logic is complicated otherwise, leave it along for a moment. */ if (and_with->flags & ANYOF_INVERT) { /* Here, the and'ed node is inverted. Get the AND of the flags that * aren't affected by the inversion. Those that are affected are * handled individually below */ U8 affected_flags = cl->flags & ~INVERSION_UNAFFECTED_FLAGS; cl->flags &= (and_with->flags & INVERSION_UNAFFECTED_FLAGS); cl->flags |= affected_flags; /* We currently don't know how to deal with things that aren't in the * bitmap, but we know that the intersection is no greater than what * is already in cl, so let there be false positives that get sorted * out after the synthetic start class succeeds, and the node is * matched for real. */ /* The inversion of these two flags indicate that the resulting * intersection doesn't have them */ if (and_with->flags & ANYOF_UNICODE_ALL) { cl->flags &= ~ANYOF_UNICODE_ALL; } if (and_with->flags & ANYOF_NON_UTF8_LATIN1_ALL) { cl->flags &= ~ANYOF_NON_UTF8_LATIN1_ALL; } } else { /* and'd node is not inverted */ U8 outside_bitmap_but_not_utf8; /* Temp variable */ if (! ANYOF_NONBITMAP(and_with)) { /* Here 'and_with' doesn't match anything outside the bitmap * (except possibly ANYOF_UNICODE_ALL), which means the * intersection can't either, except for ANYOF_UNICODE_ALL, in * which case we don't know what the intersection is, but it's no * greater than what cl already has, so can just leave it alone, * with possible false positives */ if (! (and_with->flags & ANYOF_UNICODE_ALL)) { ARG_SET(cl, ANYOF_NONBITMAP_EMPTY); cl->flags &= ~ANYOF_NONBITMAP_NON_UTF8; } } else if (! ANYOF_NONBITMAP(cl)) { /* Here, 'and_with' does match something outside the bitmap, and cl * doesn't have a list of things to match outside the bitmap. If * cl can match all code points above 255, the intersection will * be those above-255 code points that 'and_with' matches. If cl * can't match all Unicode code points, it means that it can't * match anything outside the bitmap (since the 'if' that got us * into this block tested for that), so we leave the bitmap empty. */ if (cl->flags & ANYOF_UNICODE_ALL) { ARG_SET(cl, ARG(and_with)); /* and_with's ARG may match things that don't require UTF8. * And now cl's will too, in spite of this being an 'and'. See * the comments below about the kludge */ cl->flags |= and_with->flags & ANYOF_NONBITMAP_NON_UTF8; } } else { /* Here, both 'and_with' and cl match something outside the * bitmap. Currently we do not do the intersection, so just match * whatever cl had at the beginning. */ } /* Take the intersection of the two sets of flags. However, the * ANYOF_NONBITMAP_NON_UTF8 flag is treated as an 'or'. This is a * kludge around the fact that this flag is not treated like the others * which are initialized in cl_anything(). The way the optimizer works * is that the synthetic start class (SSC) is initialized to match * anything, and then the first time a real node is encountered, its * values are AND'd with the SSC's with the result being the values of * the real node. However, there are paths through the optimizer where * the AND never gets called, so those initialized bits are set * inappropriately, which is not usually a big deal, as they just cause * false positives in the SSC, which will just mean a probably * imperceptible slow down in execution. However this bit has a * higher false positive consequence in that it can cause utf8.pm, * utf8_heavy.pl ... to be loaded when not necessary, which is a much * bigger slowdown and also causes significant extra memory to be used. * In order to prevent this, the code now takes a different tack. The * bit isn't set unless some part of the regular expression needs it, * but once set it won't get cleared. This means that these extra * modules won't get loaded unless there was some path through the * pattern that would have required them anyway, and so any false * positives that occur by not ANDing them out when they could be * aren't as severe as they would be if we treated this bit like all * the others */ outside_bitmap_but_not_utf8 = (cl->flags | and_with->flags) & ANYOF_NONBITMAP_NON_UTF8; cl->flags &= and_with->flags; cl->flags |= outside_bitmap_but_not_utf8; } } /* 'OR' a given class with another one. Can create false positives. 'cl' * should not be inverted. 'or_with->flags & ANYOF_CLASS' should be 0 if * 'or_with' is a regnode_charclass instead of a regnode_charclass_class. */ STATIC void S_cl_or(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl, const struct regnode_charclass_class *or_with) { PERL_ARGS_ASSERT_CL_OR; if (or_with->flags & ANYOF_INVERT) { /* Here, the or'd node is to be inverted. This means we take the * complement of everything not in the bitmap, but currently we don't * know what that is, so give up and match anything */ if (ANYOF_NONBITMAP(or_with)) { cl_anything(pRExC_state, cl); } /* We do not use * (B1 | CL1) | (!B2 & !CL2) = (B1 | !B2 & !CL2) | (CL1 | (!B2 & !CL2)) * <= (B1 | !B2) | (CL1 | !CL2) * which is wasteful if CL2 is small, but we ignore CL2: * (B1 | CL1) | (!B2 & !CL2) <= (B1 | CL1) | !B2 = (B1 | !B2) | CL1 * XXXX Can we handle case-fold? Unclear: * (OK1(i) | OK1(i')) | !(OK1(i) | OK1(i')) = * (OK1(i) | OK1(i')) | (!OK1(i) & !OK1(i')) */ else if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE) && !(or_with->flags & ANYOF_LOC_FOLD) && !(cl->flags & ANYOF_LOC_FOLD) ) { int i; for (i = 0; i < ANYOF_BITMAP_SIZE; i++) cl->bitmap[i] |= ~or_with->bitmap[i]; } /* XXXX: logic is complicated otherwise */ else { cl_anything(pRExC_state, cl); } /* And, we can just take the union of the flags that aren't affected * by the inversion */ cl->flags |= or_with->flags & INVERSION_UNAFFECTED_FLAGS; /* For the remaining flags: ANYOF_UNICODE_ALL and inverted means to not match anything above 255, which means that the union with cl should just be what cl has in it, so can ignore this flag ANYOF_NON_UTF8_LATIN1_ALL and inverted means if not utf8 and ord is 127-255 to match them, but then invert that, so the union with cl should just be what cl has in it, so can ignore this flag */ } else { /* 'or_with' is not inverted */ /* (B1 | CL1) | (B2 | CL2) = (B1 | B2) | (CL1 | CL2)) */ if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE) && (!(or_with->flags & ANYOF_LOC_FOLD) || (cl->flags & ANYOF_LOC_FOLD)) ) { int i; /* OR char bitmap and class bitmap separately */ for (i = 0; i < ANYOF_BITMAP_SIZE; i++) cl->bitmap[i] |= or_with->bitmap[i]; if (ANYOF_CLASS_TEST_ANY_SET(or_with)) { for (i = 0; i < ANYOF_CLASSBITMAP_SIZE; i++) cl->classflags[i] |= or_with->classflags[i]; cl->flags |= ANYOF_CLASS; } } else { /* XXXX: logic is complicated, leave it along for a moment. */ cl_anything(pRExC_state, cl); } if (ANYOF_NONBITMAP(or_with)) { /* Use the added node's outside-the-bit-map match if there isn't a * conflict. If there is a conflict (both nodes match something * outside the bitmap, but what they match outside is not the same * pointer, and hence not easily compared until XXX we extend * inversion lists this far), give up and allow the start class to * match everything outside the bitmap. If that stuff is all above * 255, can just set UNICODE_ALL, otherwise caould be anything. */ if (! ANYOF_NONBITMAP(cl)) { ARG_SET(cl, ARG(or_with)); } else if (ARG(cl) != ARG(or_with)) { if ((or_with->flags & ANYOF_NONBITMAP_NON_UTF8)) { cl_anything(pRExC_state, cl); } else { cl->flags |= ANYOF_UNICODE_ALL; } } } /* Take the union */ cl->flags |= or_with->flags; } } #define TRIE_LIST_ITEM(state,idx) (trie->states[state].trans.list)[ idx ] #define TRIE_LIST_CUR(state) ( TRIE_LIST_ITEM( state, 0 ).forid ) #define TRIE_LIST_LEN(state) ( TRIE_LIST_ITEM( state, 0 ).newstate ) #define TRIE_LIST_USED(idx) ( trie->states[state].trans.list ? (TRIE_LIST_CUR( idx ) - 1) : 0 ) #ifdef DEBUGGING /* dump_trie(trie,widecharmap,revcharmap) dump_trie_interim_list(trie,widecharmap,revcharmap,next_alloc) dump_trie_interim_table(trie,widecharmap,revcharmap,next_alloc) These routines dump out a trie in a somewhat readable format. The _interim_ variants are used for debugging the interim tables that are used to generate the final compressed representation which is what dump_trie expects. Part of the reason for their existence is to provide a form of documentation as to how the different representations function. */ /* Dumps the final compressed table form of the trie to Perl_debug_log. Used for debugging make_trie(). */ STATIC void S_dump_trie(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap, AV *revcharmap, U32 depth) { U32 state; SV *sv=sv_newmortal(); int colwidth= widecharmap ? 6 : 4; U16 word; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_DUMP_TRIE; PerlIO_printf( Perl_debug_log, "%*sChar : %-6s%-6s%-4s ", (int)depth * 2 + 2,"", "Match","Base","Ofs" ); for( state = 0 ; state < trie->uniquecharcount ; state++ ) { SV ** const tmp = av_fetch( revcharmap, state, 0); if ( tmp ) { PerlIO_printf( Perl_debug_log, "%*s", colwidth, pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth, PL_colors[0], PL_colors[1], (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) | PERL_PV_ESCAPE_FIRSTCHAR ) ); } } PerlIO_printf( Perl_debug_log, "\n%*sState|-----------------------", (int)depth * 2 + 2,""); for( state = 0 ; state < trie->uniquecharcount ; state++ ) PerlIO_printf( Perl_debug_log, "%.*s", colwidth, "--------"); PerlIO_printf( Perl_debug_log, "\n"); for( state = 1 ; state < trie->statecount ; state++ ) { const U32 base = trie->states[ state ].trans.base; PerlIO_printf( Perl_debug_log, "%*s#%4"UVXf"|", (int)depth * 2 + 2,"", (UV)state); if ( trie->states[ state ].wordnum ) { PerlIO_printf( Perl_debug_log, " W%4X", trie->states[ state ].wordnum ); } else { PerlIO_printf( Perl_debug_log, "%6s", "" ); } PerlIO_printf( Perl_debug_log, " @%4"UVXf" ", (UV)base ); if ( base ) { U32 ofs = 0; while( ( base + ofs < trie->uniquecharcount ) || ( base + ofs - trie->uniquecharcount < trie->lasttrans && trie->trans[ base + ofs - trie->uniquecharcount ].check != state)) ofs++; PerlIO_printf( Perl_debug_log, "+%2"UVXf"[ ", (UV)ofs); for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) { if ( ( base + ofs >= trie->uniquecharcount ) && ( base + ofs - trie->uniquecharcount < trie->lasttrans ) && trie->trans[ base + ofs - trie->uniquecharcount ].check == state ) { PerlIO_printf( Perl_debug_log, "%*"UVXf, colwidth, (UV)trie->trans[ base + ofs - trie->uniquecharcount ].next ); } else { PerlIO_printf( Perl_debug_log, "%*s",colwidth," ." ); } } PerlIO_printf( Perl_debug_log, "]"); } PerlIO_printf( Perl_debug_log, "\n" ); } PerlIO_printf(Perl_debug_log, "%*sword_info N:(prev,len)=", (int)depth*2, ""); for (word=1; word <= trie->wordcount; word++) { PerlIO_printf(Perl_debug_log, " %d:(%d,%d)", (int)word, (int)(trie->wordinfo[word].prev), (int)(trie->wordinfo[word].len)); } PerlIO_printf(Perl_debug_log, "\n" ); } /* Dumps a fully constructed but uncompressed trie in list form. List tries normally only are used for construction when the number of possible chars (trie->uniquecharcount) is very high. Used for debugging make_trie(). */ STATIC void S_dump_trie_interim_list(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap, AV *revcharmap, U32 next_alloc, U32 depth) { U32 state; SV *sv=sv_newmortal(); int colwidth= widecharmap ? 6 : 4; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_LIST; /* print out the table precompression. */ PerlIO_printf( Perl_debug_log, "%*sState :Word | Transition Data\n%*s%s", (int)depth * 2 + 2,"", (int)depth * 2 + 2,"", "------:-----+-----------------\n" ); for( state=1 ; state < next_alloc ; state ++ ) { U16 charid; PerlIO_printf( Perl_debug_log, "%*s %4"UVXf" :", (int)depth * 2 + 2,"", (UV)state ); if ( ! trie->states[ state ].wordnum ) { PerlIO_printf( Perl_debug_log, "%5s| ",""); } else { PerlIO_printf( Perl_debug_log, "W%4x| ", trie->states[ state ].wordnum ); } for( charid = 1 ; charid <= TRIE_LIST_USED( state ) ; charid++ ) { SV ** const tmp = av_fetch( revcharmap, TRIE_LIST_ITEM(state,charid).forid, 0); if ( tmp ) { PerlIO_printf( Perl_debug_log, "%*s:%3X=%4"UVXf" | ", colwidth, pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth, PL_colors[0], PL_colors[1], (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) | PERL_PV_ESCAPE_FIRSTCHAR ) , TRIE_LIST_ITEM(state,charid).forid, (UV)TRIE_LIST_ITEM(state,charid).newstate ); if (!(charid % 10)) PerlIO_printf(Perl_debug_log, "\n%*s| ", (int)((depth * 2) + 14), ""); } } PerlIO_printf( Perl_debug_log, "\n"); } } /* Dumps a fully constructed but uncompressed trie in table form. This is the normal DFA style state transition table, with a few twists to facilitate compression later. Used for debugging make_trie(). */ STATIC void S_dump_trie_interim_table(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap, AV *revcharmap, U32 next_alloc, U32 depth) { U32 state; U16 charid; SV *sv=sv_newmortal(); int colwidth= widecharmap ? 6 : 4; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_TABLE; /* print out the table precompression so that we can do a visual check that they are identical. */ PerlIO_printf( Perl_debug_log, "%*sChar : ",(int)depth * 2 + 2,"" ); for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) { SV ** const tmp = av_fetch( revcharmap, charid, 0); if ( tmp ) { PerlIO_printf( Perl_debug_log, "%*s", colwidth, pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth, PL_colors[0], PL_colors[1], (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) | PERL_PV_ESCAPE_FIRSTCHAR ) ); } } PerlIO_printf( Perl_debug_log, "\n%*sState+-",(int)depth * 2 + 2,"" ); for( charid=0 ; charid < trie->uniquecharcount ; charid++ ) { PerlIO_printf( Perl_debug_log, "%.*s", colwidth,"--------"); } PerlIO_printf( Perl_debug_log, "\n" ); for( state=1 ; state < next_alloc ; state += trie->uniquecharcount ) { PerlIO_printf( Perl_debug_log, "%*s%4"UVXf" : ", (int)depth * 2 + 2,"", (UV)TRIE_NODENUM( state ) ); for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) { UV v=(UV)SAFE_TRIE_NODENUM( trie->trans[ state + charid ].next ); if (v) PerlIO_printf( Perl_debug_log, "%*"UVXf, colwidth, v ); else PerlIO_printf( Perl_debug_log, "%*s", colwidth, "." ); } if ( ! trie->states[ TRIE_NODENUM( state ) ].wordnum ) { PerlIO_printf( Perl_debug_log, " (%4"UVXf")\n", (UV)trie->trans[ state ].check ); } else { PerlIO_printf( Perl_debug_log, " (%4"UVXf") W%4X\n", (UV)trie->trans[ state ].check, trie->states[ TRIE_NODENUM( state ) ].wordnum ); } } } #endif /* make_trie(startbranch,first,last,tail,word_count,flags,depth) startbranch: the first branch in the whole branch sequence first : start branch of sequence of branch-exact nodes. May be the same as startbranch last : Thing following the last branch. May be the same as tail. tail : item following the branch sequence count : words in the sequence flags : currently the OP() type we will be building one of /EXACT(|F|Fl)/ depth : indent depth Inplace optimizes a sequence of 2 or more Branch-Exact nodes into a TRIE node. A trie is an N'ary tree where the branches are determined by digital decomposition of the key. IE, at the root node you look up the 1st character and follow that branch repeat until you find the end of the branches. Nodes can be marked as "accepting" meaning they represent a complete word. Eg: /he|she|his|hers/ would convert into the following structure. Numbers represent states, letters following numbers represent valid transitions on the letter from that state, if the number is in square brackets it represents an accepting state, otherwise it will be in parenthesis. +-h->+-e->[3]-+-r->(8)-+-s->[9] | | | (2) | | (1) +-i->(6)-+-s->[7] | +-s->(3)-+-h->(4)-+-e->[5] Accept Word Mapping: 3=>1 (he),5=>2 (she), 7=>3 (his), 9=>4 (hers) This shows that when matching against the string 'hers' we will begin at state 1 read 'h' and move to state 2, read 'e' and move to state 3 which is accepting, then read 'r' and go to state 8 followed by 's' which takes us to state 9 which is also accepting. Thus we know that we can match both 'he' and 'hers' with a single traverse. We store a mapping from accepting to state to which word was matched, and then when we have multiple possibilities we try to complete the rest of the regex in the order in which they occured in the alternation. The only prior NFA like behaviour that would be changed by the TRIE support is the silent ignoring of duplicate alternations which are of the form: / (DUPE|DUPE) X? (?{ ... }) Y /x Thus EVAL blocks following a trie may be called a different number of times with and without the optimisation. With the optimisations dupes will be silently ignored. This inconsistent behaviour of EVAL type nodes is well established as the following demonstrates: 'words'=~/(word|word|word)(?{ print $1 })[xyz]/ which prints out 'word' three times, but 'words'=~/(word|word|word)(?{ print $1 })S/ which doesnt print it out at all. This is due to other optimisations kicking in. Example of what happens on a structural level: The regexp /(ac|ad|ab)+/ will produce the following debug output: 1: CURLYM[1] {1,32767}(18) 5: BRANCH(8) 6: EXACT (16) 8: BRANCH(11) 9: EXACT (16) 11: BRANCH(14) 12: EXACT (16) 16: SUCCEED(0) 17: NOTHING(18) 18: END(0) This would be optimizable with startbranch=5, first=5, last=16, tail=16 and should turn into: 1: CURLYM[1] {1,32767}(18) 5: TRIE(16) [Words:3 Chars Stored:6 Unique Chars:4 States:5 NCP:1] 16: SUCCEED(0) 17: NOTHING(18) 18: END(0) Cases where tail != last would be like /(?foo|bar)baz/: 1: BRANCH(4) 2: EXACT (8) 4: BRANCH(7) 5: EXACT (8) 7: TAIL(8) 8: EXACT (10) 10: END(0) which would be optimizable with startbranch=1, first=1, last=7, tail=8 and would end up looking like: 1: TRIE(8) [Words:2 Chars Stored:6 Unique Chars:5 States:7 NCP:1] 7: TAIL(8) 8: EXACT (10) 10: END(0) d = uvuni_to_utf8_flags(d, uv, 0); is the recommended Unicode-aware way of saying *(d++) = uv; */ #define TRIE_STORE_REVCHAR(val) \ STMT_START { \ if (UTF) { \ SV *zlopp = newSV(7); /* XXX: optimize me */ \ unsigned char *flrbbbbb = (unsigned char *) SvPVX(zlopp); \ unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, val); \ SvCUR_set(zlopp, kapow - flrbbbbb); \ SvPOK_on(zlopp); \ SvUTF8_on(zlopp); \ av_push(revcharmap, zlopp); \ } else { \ char ooooff = (char)val; \ av_push(revcharmap, newSVpvn(&ooooff, 1)); \ } \ } STMT_END #define TRIE_READ_CHAR STMT_START { \ wordlen++; \ if ( UTF ) { \ /* if it is UTF then it is either already folded, or does not need folding */ \ uvc = utf8n_to_uvuni( (const U8*) uc, UTF8_MAXLEN, &len, uniflags); \ } \ else if (folder == PL_fold_latin1) { \ /* if we use this folder we have to obey unicode rules on latin-1 data */ \ if ( foldlen > 0 ) { \ uvc = utf8n_to_uvuni( (const U8*) scan, UTF8_MAXLEN, &len, uniflags ); \ foldlen -= len; \ scan += len; \ len = 0; \ } else { \ len = 1; \ uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, 1); \ skiplen = UNISKIP(uvc); \ foldlen -= skiplen; \ scan = foldbuf + skiplen; \ } \ } else { \ /* raw data, will be folded later if needed */ \ uvc = (U32)*uc; \ len = 1; \ } \ } STMT_END #define TRIE_LIST_PUSH(state,fid,ns) STMT_START { \ if ( TRIE_LIST_CUR( state ) >=TRIE_LIST_LEN( state ) ) { \ U32 ging = TRIE_LIST_LEN( state ) *= 2; \ Renew( trie->states[ state ].trans.list, ging, reg_trie_trans_le ); \ } \ TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).forid = fid; \ TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).newstate = ns; \ TRIE_LIST_CUR( state )++; \ } STMT_END #define TRIE_LIST_NEW(state) STMT_START { \ Newxz( trie->states[ state ].trans.list, \ 4, reg_trie_trans_le ); \ TRIE_LIST_CUR( state ) = 1; \ TRIE_LIST_LEN( state ) = 4; \ } STMT_END #define TRIE_HANDLE_WORD(state) STMT_START { \ U16 dupe= trie->states[ state ].wordnum; \ regnode * const noper_next = regnext( noper ); \ \ DEBUG_r({ \ /* store the word for dumping */ \ SV* tmp; \ if (OP(noper) != NOTHING) \ tmp = newSVpvn_utf8(STRING(noper), STR_LEN(noper), UTF); \ else \ tmp = newSVpvn_utf8( "", 0, UTF ); \ av_push( trie_words, tmp ); \ }); \ \ curword++; \ trie->wordinfo[curword].prev = 0; \ trie->wordinfo[curword].len = wordlen; \ trie->wordinfo[curword].accept = state; \ \ if ( noper_next < tail ) { \ if (!trie->jump) \ trie->jump = (U16 *) PerlMemShared_calloc( word_count + 1, sizeof(U16) ); \ trie->jump[curword] = (U16)(noper_next - convert); \ if (!jumper) \ jumper = noper_next; \ if (!nextbranch) \ nextbranch= regnext(cur); \ } \ \ if ( dupe ) { \ /* It's a dupe. Pre-insert into the wordinfo[].prev */\ /* chain, so that when the bits of chain are later */\ /* linked together, the dups appear in the chain */\ trie->wordinfo[curword].prev = trie->wordinfo[dupe].prev; \ trie->wordinfo[dupe].prev = curword; \ } else { \ /* we haven't inserted this word yet. */ \ trie->states[ state ].wordnum = curword; \ } \ } STMT_END #define TRIE_TRANS_STATE(state,base,ucharcount,charid,special) \ ( ( base + charid >= ucharcount \ && base + charid < ubound \ && state == trie->trans[ base - ucharcount + charid ].check \ && trie->trans[ base - ucharcount + charid ].next ) \ ? trie->trans[ base - ucharcount + charid ].next \ : ( state==1 ? special : 0 ) \ ) #define MADE_TRIE 1 #define MADE_JUMP_TRIE 2 #define MADE_EXACT_TRIE 4 STATIC I32 S_make_trie(pTHX_ RExC_state_t *pRExC_state, regnode *startbranch, regnode *first, regnode *last, regnode *tail, U32 word_count, U32 flags, U32 depth) { dVAR; /* first pass, loop through and scan words */ reg_trie_data *trie; HV *widecharmap = NULL; AV *revcharmap = newAV(); regnode *cur; const U32 uniflags = UTF8_ALLOW_DEFAULT; STRLEN len = 0; UV uvc = 0; U16 curword = 0; U32 next_alloc = 0; regnode *jumper = NULL; regnode *nextbranch = NULL; regnode *convert = NULL; U32 *prev_states; /* temp array mapping each state to previous one */ /* we just use folder as a flag in utf8 */ const U8 * folder = NULL; #ifdef DEBUGGING const U32 data_slot = add_data( pRExC_state, 4, "tuuu" ); AV *trie_words = NULL; /* along with revcharmap, this only used during construction but both are * useful during debugging so we store them in the struct when debugging. */ #else const U32 data_slot = add_data( pRExC_state, 2, "tu" ); STRLEN trie_charcount=0; #endif SV *re_trie_maxbuff; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_MAKE_TRIE; #ifndef DEBUGGING PERL_UNUSED_ARG(depth); #endif switch (flags) { case EXACT: break; case EXACTFA: case EXACTFU_SS: case EXACTFU_TRICKYFOLD: case EXACTFU: folder = PL_fold_latin1; break; case EXACTF: folder = PL_fold; break; case EXACTFL: folder = PL_fold_locale; break; default: Perl_croak( aTHX_ "panic! In trie construction, unknown node type %u %s", (unsigned) flags, PL_reg_name[flags] ); } trie = (reg_trie_data *) PerlMemShared_calloc( 1, sizeof(reg_trie_data) ); trie->refcount = 1; trie->startstate = 1; trie->wordcount = word_count; RExC_rxi->data->data[ data_slot ] = (void*)trie; trie->charmap = (U16 *) PerlMemShared_calloc( 256, sizeof(U16) ); if (flags == EXACT) trie->bitmap = (char *) PerlMemShared_calloc( ANYOF_BITMAP_SIZE, 1 ); trie->wordinfo = (reg_trie_wordinfo *) PerlMemShared_calloc( trie->wordcount+1, sizeof(reg_trie_wordinfo)); DEBUG_r({ trie_words = newAV(); }); re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1); if (!SvIOK(re_trie_maxbuff)) { sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT); } DEBUG_TRIE_COMPILE_r({ PerlIO_printf( Perl_debug_log, "%*smake_trie start==%d, first==%d, last==%d, tail==%d depth=%d\n", (int)depth * 2 + 2, "", REG_NODE_NUM(startbranch),REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(tail), (int)depth); }); /* Find the node we are going to overwrite */ if ( first == startbranch && OP( last ) != BRANCH ) { /* whole branch chain */ convert = first; } else { /* branch sub-chain */ convert = NEXTOPER( first ); } /* -- First loop and Setup -- We first traverse the branches and scan each word to determine if it contains widechars, and how many unique chars there are, this is important as we have to build a table with at least as many columns as we have unique chars. We use an array of integers to represent the character codes 0..255 (trie->charmap) and we use a an HV* to store Unicode characters. We use the native representation of the character value as the key and IV's for the coded index. *TODO* If we keep track of how many times each character is used we can remap the columns so that the table compression later on is more efficient in terms of memory by ensuring the most common value is in the middle and the least common are on the outside. IMO this would be better than a most to least common mapping as theres a decent chance the most common letter will share a node with the least common, meaning the node will not be compressible. With a middle is most common approach the worst case is when we have the least common nodes twice. */ for ( cur = first ; cur < last ; cur = regnext( cur ) ) { regnode *noper = NEXTOPER( cur ); const U8 *uc = (U8*)STRING( noper ); const U8 *e = uc + STR_LEN( noper ); STRLEN foldlen = 0; U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ]; STRLEN skiplen = 0; const U8 *scan = (U8*)NULL; U32 wordlen = 0; /* required init */ STRLEN chars = 0; bool set_bit = trie->bitmap ? 1 : 0; /*store the first char in the bitmap?*/ if (OP(noper) == NOTHING) { regnode *noper_next= regnext(noper); if (noper_next != tail && OP(noper_next) == flags) { noper = noper_next; uc= (U8*)STRING(noper); e= uc + STR_LEN(noper); trie->minlen= STR_LEN(noper); } else { trie->minlen= 0; continue; } } if ( set_bit ) { /* bitmap only alloced when !(UTF&&Folding) */ TRIE_BITMAP_SET(trie,*uc); /* store the raw first byte regardless of encoding */ if (OP( noper ) == EXACTFU_SS) { /* false positives are ok, so just set this */ TRIE_BITMAP_SET(trie,0xDF); } } for ( ; uc < e ; uc += len ) { TRIE_CHARCOUNT(trie)++; TRIE_READ_CHAR; chars++; if ( uvc < 256 ) { if ( folder ) { U8 folded= folder[ (U8) uvc ]; if ( !trie->charmap[ folded ] ) { trie->charmap[ folded ]=( ++trie->uniquecharcount ); TRIE_STORE_REVCHAR( folded ); } } if ( !trie->charmap[ uvc ] ) { trie->charmap[ uvc ]=( ++trie->uniquecharcount ); TRIE_STORE_REVCHAR( uvc ); } if ( set_bit ) { /* store the codepoint in the bitmap, and its folded * equivalent. */ TRIE_BITMAP_SET(trie, uvc); /* store the folded codepoint */ if ( folder ) TRIE_BITMAP_SET(trie, folder[(U8) uvc ]); if ( !UTF ) { /* store first byte of utf8 representation of variant codepoints */ if (! UNI_IS_INVARIANT(uvc)) { TRIE_BITMAP_SET(trie, UTF8_TWO_BYTE_HI(uvc)); } } set_bit = 0; /* We've done our bit :-) */ } } else { SV** svpp; if ( !widecharmap ) widecharmap = newHV(); svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 1 ); if ( !svpp ) Perl_croak( aTHX_ "error creating/fetching widecharmap entry for 0x%"UVXf, uvc ); if ( !SvTRUE( *svpp ) ) { sv_setiv( *svpp, ++trie->uniquecharcount ); TRIE_STORE_REVCHAR(uvc); } } } if( cur == first ) { trie->minlen = chars; trie->maxlen = chars; } else if (chars < trie->minlen) { trie->minlen = chars; } else if (chars > trie->maxlen) { trie->maxlen = chars; } if (OP( noper ) == EXACTFU_SS) { /* XXX: workaround - 'ss' could match "\x{DF}" so minlen could be 1 and not 2*/ if (trie->minlen > 1) trie->minlen= 1; } if (OP( noper ) == EXACTFU_TRICKYFOLD) { /* XXX: workround - things like "\x{1FBE}\x{0308}\x{0301}" can match "\x{0390}" * - We assume that any such sequence might match a 2 byte string */ if (trie->minlen > 2 ) trie->minlen= 2; } } /* end first pass */ DEBUG_TRIE_COMPILE_r( PerlIO_printf( Perl_debug_log, "%*sTRIE(%s): W:%d C:%d Uq:%d Min:%d Max:%d\n", (int)depth * 2 + 2,"", ( widecharmap ? "UTF8" : "NATIVE" ), (int)word_count, (int)TRIE_CHARCOUNT(trie), trie->uniquecharcount, (int)trie->minlen, (int)trie->maxlen ) ); /* We now know what we are dealing with in terms of unique chars and string sizes so we can calculate how much memory a naive representation using a flat table will take. If it's over a reasonable limit (as specified by ${^RE_TRIE_MAXBUF}) we use a more memory conservative but potentially much slower representation using an array of lists. At the end we convert both representations into the same compressed form that will be used in regexec.c for matching with. The latter is a form that cannot be used to construct with but has memory properties similar to the list form and access properties similar to the table form making it both suitable for fast searches and small enough that its feasable to store for the duration of a program. See the comment in the code where the compressed table is produced inplace from the flat tabe representation for an explanation of how the compression works. */ Newx(prev_states, TRIE_CHARCOUNT(trie) + 2, U32); prev_states[1] = 0; if ( (IV)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1) > SvIV(re_trie_maxbuff) ) { /* Second Pass -- Array Of Lists Representation Each state will be represented by a list of charid:state records (reg_trie_trans_le) the first such element holds the CUR and LEN points of the allocated array. (See defines above). We build the initial structure using the lists, and then convert it into the compressed table form which allows faster lookups (but cant be modified once converted). */ STRLEN transcount = 1; DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log, "%*sCompiling trie using list compiler\n", (int)depth * 2 + 2, "")); trie->states = (reg_trie_state *) PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2, sizeof(reg_trie_state) ); TRIE_LIST_NEW(1); next_alloc = 2; for ( cur = first ; cur < last ; cur = regnext( cur ) ) { regnode *noper = NEXTOPER( cur ); U8 *uc = (U8*)STRING( noper ); const U8 *e = uc + STR_LEN( noper ); U32 state = 1; /* required init */ U16 charid = 0; /* sanity init */ U8 *scan = (U8*)NULL; /* sanity init */ STRLEN foldlen = 0; /* required init */ U32 wordlen = 0; /* required init */ U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ]; STRLEN skiplen = 0; if (OP(noper) == NOTHING) { regnode *noper_next= regnext(noper); if (noper_next != tail && OP(noper_next) == flags) { noper = noper_next; uc= (U8*)STRING(noper); e= uc + STR_LEN(noper); } } if (OP(noper) != NOTHING) { for ( ; uc < e ; uc += len ) { TRIE_READ_CHAR; if ( uvc < 256 ) { charid = trie->charmap[ uvc ]; } else { SV** const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0); if ( !svpp ) { charid = 0; } else { charid=(U16)SvIV( *svpp ); } } /* charid is now 0 if we dont know the char read, or nonzero if we do */ if ( charid ) { U16 check; U32 newstate = 0; charid--; if ( !trie->states[ state ].trans.list ) { TRIE_LIST_NEW( state ); } for ( check = 1; check <= TRIE_LIST_USED( state ); check++ ) { if ( TRIE_LIST_ITEM( state, check ).forid == charid ) { newstate = TRIE_LIST_ITEM( state, check ).newstate; break; } } if ( ! newstate ) { newstate = next_alloc++; prev_states[newstate] = state; TRIE_LIST_PUSH( state, charid, newstate ); transcount++; } state = newstate; } else { Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc ); } } } TRIE_HANDLE_WORD(state); } /* end second pass */ /* next alloc is the NEXT state to be allocated */ trie->statecount = next_alloc; trie->states = (reg_trie_state *) PerlMemShared_realloc( trie->states, next_alloc * sizeof(reg_trie_state) ); /* and now dump it out before we compress it */ DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_list(trie, widecharmap, revcharmap, next_alloc, depth+1) ); trie->trans = (reg_trie_trans *) PerlMemShared_calloc( transcount, sizeof(reg_trie_trans) ); { U32 state; U32 tp = 0; U32 zp = 0; for( state=1 ; state < next_alloc ; state ++ ) { U32 base=0; /* DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log, "tp: %d zp: %d ",tp,zp) ); */ if (trie->states[state].trans.list) { U16 minid=TRIE_LIST_ITEM( state, 1).forid; U16 maxid=minid; U16 idx; for( idx = 2 ; idx <= TRIE_LIST_USED( state ) ; idx++ ) { const U16 forid = TRIE_LIST_ITEM( state, idx).forid; if ( forid < minid ) { minid=forid; } else if ( forid > maxid ) { maxid=forid; } } if ( transcount < tp + maxid - minid + 1) { transcount *= 2; trie->trans = (reg_trie_trans *) PerlMemShared_realloc( trie->trans, transcount * sizeof(reg_trie_trans) ); Zero( trie->trans + (transcount / 2), transcount / 2 , reg_trie_trans ); } base = trie->uniquecharcount + tp - minid; if ( maxid == minid ) { U32 set = 0; for ( ; zp < tp ; zp++ ) { if ( ! trie->trans[ zp ].next ) { base = trie->uniquecharcount + zp - minid; trie->trans[ zp ].next = TRIE_LIST_ITEM( state, 1).newstate; trie->trans[ zp ].check = state; set = 1; break; } } if ( !set ) { trie->trans[ tp ].next = TRIE_LIST_ITEM( state, 1).newstate; trie->trans[ tp ].check = state; tp++; zp = tp; } } else { for ( idx=1; idx <= TRIE_LIST_USED( state ) ; idx++ ) { const U32 tid = base - trie->uniquecharcount + TRIE_LIST_ITEM( state, idx ).forid; trie->trans[ tid ].next = TRIE_LIST_ITEM( state, idx ).newstate; trie->trans[ tid ].check = state; } tp += ( maxid - minid + 1 ); } Safefree(trie->states[ state ].trans.list); } /* DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log, " base: %d\n",base); ); */ trie->states[ state ].trans.base=base; } trie->lasttrans = tp + 1; } } else { /* Second Pass -- Flat Table Representation. we dont use the 0 slot of either trans[] or states[] so we add 1 to each. We know that we will need Charcount+1 trans at most to store the data (one row per char at worst case) So we preallocate both structures assuming worst case. We then construct the trie using only the .next slots of the entry structs. We use the .check field of the first entry of the node temporarily to make compression both faster and easier by keeping track of how many non zero fields are in the node. Since trans are numbered from 1 any 0 pointer in the table is a FAIL transition. There are two terms at use here: state as a TRIE_NODEIDX() which is a number representing the first entry of the node, and state as a TRIE_NODENUM() which is the trans number. state 1 is TRIE_NODEIDX(1) and TRIE_NODENUM(1), state 2 is TRIE_NODEIDX(2) and TRIE_NODENUM(3) if there are 2 entrys per node. eg: A B A B 1. 2 4 1. 3 7 2. 0 3 3. 0 5 3. 0 0 5. 0 0 4. 0 0 7. 0 0 The table is internally in the right hand, idx form. However as we also have to deal with the states array which is indexed by nodenum we have to use TRIE_NODENUM() to convert. */ DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log, "%*sCompiling trie using table compiler\n", (int)depth * 2 + 2, "")); trie->trans = (reg_trie_trans *) PerlMemShared_calloc( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1, sizeof(reg_trie_trans) ); trie->states = (reg_trie_state *) PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2, sizeof(reg_trie_state) ); next_alloc = trie->uniquecharcount + 1; for ( cur = first ; cur < last ; cur = regnext( cur ) ) { regnode *noper = NEXTOPER( cur ); const U8 *uc = (U8*)STRING( noper ); const U8 *e = uc + STR_LEN( noper ); U32 state = 1; /* required init */ U16 charid = 0; /* sanity init */ U32 accept_state = 0; /* sanity init */ U8 *scan = (U8*)NULL; /* sanity init */ STRLEN foldlen = 0; /* required init */ U32 wordlen = 0; /* required init */ STRLEN skiplen = 0; U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ]; if (OP(noper) == NOTHING) { regnode *noper_next= regnext(noper); if (noper_next != tail && OP(noper_next) == flags) { noper = noper_next; uc= (U8*)STRING(noper); e= uc + STR_LEN(noper); } } if ( OP(noper) != NOTHING ) { for ( ; uc < e ; uc += len ) { TRIE_READ_CHAR; if ( uvc < 256 ) { charid = trie->charmap[ uvc ]; } else { SV* const * const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0); charid = svpp ? (U16)SvIV(*svpp) : 0; } if ( charid ) { charid--; if ( !trie->trans[ state + charid ].next ) { trie->trans[ state + charid ].next = next_alloc; trie->trans[ state ].check++; prev_states[TRIE_NODENUM(next_alloc)] = TRIE_NODENUM(state); next_alloc += trie->uniquecharcount; } state = trie->trans[ state + charid ].next; } else { Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc ); } /* charid is now 0 if we dont know the char read, or nonzero if we do */ } } accept_state = TRIE_NODENUM( state ); TRIE_HANDLE_WORD(accept_state); } /* end second pass */ /* and now dump it out before we compress it */ DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_table(trie, widecharmap, revcharmap, next_alloc, depth+1)); { /* * Inplace compress the table.* For sparse data sets the table constructed by the trie algorithm will be mostly 0/FAIL transitions or to put it another way mostly empty. (Note that leaf nodes will not contain any transitions.) This algorithm compresses the tables by eliminating most such transitions, at the cost of a modest bit of extra work during lookup: - Each states[] entry contains a .base field which indicates the index in the state[] array wheres its transition data is stored. - If .base is 0 there are no valid transitions from that node. - If .base is nonzero then charid is added to it to find an entry in the trans array. -If trans[states[state].base+charid].check!=state then the transition is taken to be a 0/Fail transition. Thus if there are fail transitions at the front of the node then the .base offset will point somewhere inside the previous nodes data (or maybe even into a node even earlier), but the .check field determines if the transition is valid. XXX - wrong maybe? The following process inplace converts the table to the compressed table: We first do not compress the root node 1,and mark all its .check pointers as 1 and set its .base pointer as 1 as well. This allows us to do a DFA construction from the compressed table later, and ensures that any .base pointers we calculate later are greater than 0. - We set 'pos' to indicate the first entry of the second node. - We then iterate over the columns of the node, finding the first and last used entry at l and m. We then copy l..m into pos..(pos+m-l), and set the .check pointers accordingly, and advance pos appropriately and repreat for the next node. Note that when we copy the next pointers we have to convert them from the original NODEIDX form to NODENUM form as the former is not valid post compression. - If a node has no transitions used we mark its base as 0 and do not advance the pos pointer. - If a node only has one transition we use a second pointer into the structure to fill in allocated fail transitions from other states. This pointer is independent of the main pointer and scans forward looking for null transitions that are allocated to a state. When it finds one it writes the single transition into the "hole". If the pointer doesnt find one the single transition is appended as normal. - Once compressed we can Renew/realloc the structures to release the excess space. See "Table-Compression Methods" in sec 3.9 of the Red Dragon, specifically Fig 3.47 and the associated pseudocode. demq */ const U32 laststate = TRIE_NODENUM( next_alloc ); U32 state, charid; U32 pos = 0, zp=0; trie->statecount = laststate; for ( state = 1 ; state < laststate ; state++ ) { U8 flag = 0; const U32 stateidx = TRIE_NODEIDX( state ); const U32 o_used = trie->trans[ stateidx ].check; U32 used = trie->trans[ stateidx ].check; trie->trans[ stateidx ].check = 0; for ( charid = 0 ; used && charid < trie->uniquecharcount ; charid++ ) { if ( flag || trie->trans[ stateidx + charid ].next ) { if ( trie->trans[ stateidx + charid ].next ) { if (o_used == 1) { for ( ; zp < pos ; zp++ ) { if ( ! trie->trans[ zp ].next ) { break; } } trie->states[ state ].trans.base = zp + trie->uniquecharcount - charid ; trie->trans[ zp ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next ); trie->trans[ zp ].check = state; if ( ++zp > pos ) pos = zp; break; } used--; } if ( !flag ) { flag = 1; trie->states[ state ].trans.base = pos + trie->uniquecharcount - charid ; } trie->trans[ pos ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next ); trie->trans[ pos ].check = state; pos++; } } } trie->lasttrans = pos + 1; trie->states = (reg_trie_state *) PerlMemShared_realloc( trie->states, laststate * sizeof(reg_trie_state) ); DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log, "%*sAlloc: %d Orig: %"IVdf" elements, Final:%"IVdf". Savings of %%%5.2f\n", (int)depth * 2 + 2,"", (int)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1 ), (IV)next_alloc, (IV)pos, ( ( next_alloc - pos ) * 100 ) / (double)next_alloc ); ); } /* end table compress */ } DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf(Perl_debug_log, "%*sStatecount:%"UVxf" Lasttrans:%"UVxf"\n", (int)depth * 2 + 2, "", (UV)trie->statecount, (UV)trie->lasttrans) ); /* resize the trans array to remove unused space */ trie->trans = (reg_trie_trans *) PerlMemShared_realloc( trie->trans, trie->lasttrans * sizeof(reg_trie_trans) ); { /* Modify the program and insert the new TRIE node */ U8 nodetype =(U8)(flags & 0xFF); char *str=NULL; #ifdef DEBUGGING regnode *optimize = NULL; #ifdef RE_TRACK_PATTERN_OFFSETS U32 mjd_offset = 0; U32 mjd_nodelen = 0; #endif /* RE_TRACK_PATTERN_OFFSETS */ #endif /* DEBUGGING */ /* This means we convert either the first branch or the first Exact, depending on whether the thing following (in 'last') is a branch or not and whther first is the startbranch (ie is it a sub part of the alternation or is it the whole thing.) Assuming its a sub part we convert the EXACT otherwise we convert the whole branch sequence, including the first. */ /* Find the node we are going to overwrite */ if ( first != startbranch || OP( last ) == BRANCH ) { /* branch sub-chain */ NEXT_OFF( first ) = (U16)(last - first); #ifdef RE_TRACK_PATTERN_OFFSETS DEBUG_r({ mjd_offset= Node_Offset((convert)); mjd_nodelen= Node_Length((convert)); }); #endif /* whole branch chain */ } #ifdef RE_TRACK_PATTERN_OFFSETS else { DEBUG_r({ const regnode *nop = NEXTOPER( convert ); mjd_offset= Node_Offset((nop)); mjd_nodelen= Node_Length((nop)); }); } DEBUG_OPTIMISE_r( PerlIO_printf(Perl_debug_log, "%*sMJD offset:%"UVuf" MJD length:%"UVuf"\n", (int)depth * 2 + 2, "", (UV)mjd_offset, (UV)mjd_nodelen) ); #endif /* But first we check to see if there is a common prefix we can split out as an EXACT and put in front of the TRIE node. */ trie->startstate= 1; if ( trie->bitmap && !widecharmap && !trie->jump ) { U32 state; for ( state = 1 ; state < trie->statecount-1 ; state++ ) { U32 ofs = 0; I32 idx = -1; U32 count = 0; const U32 base = trie->states[ state ].trans.base; if ( trie->states[state].wordnum ) count = 1; for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) { if ( ( base + ofs >= trie->uniquecharcount ) && ( base + ofs - trie->uniquecharcount < trie->lasttrans ) && trie->trans[ base + ofs - trie->uniquecharcount ].check == state ) { if ( ++count > 1 ) { SV **tmp = av_fetch( revcharmap, ofs, 0); const U8 *ch = (U8*)SvPV_nolen_const( *tmp ); if ( state == 1 ) break; if ( count == 2 ) { Zero(trie->bitmap, ANYOF_BITMAP_SIZE, char); DEBUG_OPTIMISE_r( PerlIO_printf(Perl_debug_log, "%*sNew Start State=%"UVuf" Class: [", (int)depth * 2 + 2, "", (UV)state)); if (idx >= 0) { SV ** const tmp = av_fetch( revcharmap, idx, 0); const U8 * const ch = (U8*)SvPV_nolen_const( *tmp ); TRIE_BITMAP_SET(trie,*ch); if ( folder ) TRIE_BITMAP_SET(trie, folder[ *ch ]); DEBUG_OPTIMISE_r( PerlIO_printf(Perl_debug_log, "%s", (char*)ch) ); } } TRIE_BITMAP_SET(trie,*ch); if ( folder ) TRIE_BITMAP_SET(trie,folder[ *ch ]); DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"%s", ch)); } idx = ofs; } } if ( count == 1 ) { SV **tmp = av_fetch( revcharmap, idx, 0); STRLEN len; char *ch = SvPV( *tmp, len ); DEBUG_OPTIMISE_r({ SV *sv=sv_newmortal(); PerlIO_printf( Perl_debug_log, "%*sPrefix State: %"UVuf" Idx:%"UVuf" Char='%s'\n", (int)depth * 2 + 2, "", (UV)state, (UV)idx, pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 6, PL_colors[0], PL_colors[1], (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) | PERL_PV_ESCAPE_FIRSTCHAR ) ); }); if ( state==1 ) { OP( convert ) = nodetype; str=STRING(convert); STR_LEN(convert)=0; } STR_LEN(convert) += len; while (len--) *str++ = *ch++; } else { #ifdef DEBUGGING if (state>1) DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"]\n")); #endif break; } } trie->prefixlen = (state-1); if (str) { regnode *n = convert+NODE_SZ_STR(convert); NEXT_OFF(convert) = NODE_SZ_STR(convert); trie->startstate = state; trie->minlen -= (state - 1); trie->maxlen -= (state - 1); #ifdef DEBUGGING /* At least the UNICOS C compiler choked on this * being argument to DEBUG_r(), so let's just have * it right here. */ if ( #ifdef PERL_EXT_RE_BUILD 1 #else DEBUG_r_TEST #endif ) { regnode *fix = convert; U32 word = trie->wordcount; mjd_nodelen++; Set_Node_Offset_Length(convert, mjd_offset, state - 1); while( ++fix < n ) { Set_Node_Offset_Length(fix, 0, 0); } while (word--) { SV ** const tmp = av_fetch( trie_words, word, 0 ); if (tmp) { if ( STR_LEN(convert) <= SvCUR(*tmp) ) sv_chop(*tmp, SvPV_nolen(*tmp) + STR_LEN(convert)); else sv_chop(*tmp, SvPV_nolen(*tmp) + SvCUR(*tmp)); } } } #endif if (trie->maxlen) { convert = n; } else { NEXT_OFF(convert) = (U16)(tail - convert); DEBUG_r(optimize= n); } } } if (!jumper) jumper = last; if ( trie->maxlen ) { NEXT_OFF( convert ) = (U16)(tail - convert); ARG_SET( convert, data_slot ); /* Store the offset to the first unabsorbed branch in jump[0], which is otherwise unused by the jump logic. We use this when dumping a trie and during optimisation. */ if (trie->jump) trie->jump[0] = (U16)(nextbranch - convert); /* If the start state is not accepting (meaning there is no empty string/NOTHING) * and there is a bitmap * and the first "jump target" node we found leaves enough room * then convert the TRIE node into a TRIEC node, with the bitmap * embedded inline in the opcode - this is hypothetically faster. */ if ( !trie->states[trie->startstate].wordnum && trie->bitmap && ( (char *)jumper - (char *)convert) >= (int)sizeof(struct regnode_charclass) ) { OP( convert ) = TRIEC; Copy(trie->bitmap, ((struct regnode_charclass *)convert)->bitmap, ANYOF_BITMAP_SIZE, char); PerlMemShared_free(trie->bitmap); trie->bitmap= NULL; } else OP( convert ) = TRIE; /* store the type in the flags */ convert->flags = nodetype; DEBUG_r({ optimize = convert + NODE_STEP_REGNODE + regarglen[ OP( convert ) ]; }); /* XXX We really should free up the resource in trie now, as we won't use them - (which resources?) dmq */ } /* needed for dumping*/ DEBUG_r(if (optimize) { regnode *opt = convert; while ( ++opt < optimize) { Set_Node_Offset_Length(opt,0,0); } /* Try to clean up some of the debris left after the optimisation. */ while( optimize < jumper ) { mjd_nodelen += Node_Length((optimize)); OP( optimize ) = OPTIMIZED; Set_Node_Offset_Length(optimize,0,0); optimize++; } Set_Node_Offset_Length(convert,mjd_offset,mjd_nodelen); }); } /* end node insert */ /* Finish populating the prev field of the wordinfo array. Walk back * from each accept state until we find another accept state, and if * so, point the first word's .prev field at the second word. If the * second already has a .prev field set, stop now. This will be the * case either if we've already processed that word's accept state, * or that state had multiple words, and the overspill words were * already linked up earlier. */ { U16 word; U32 state; U16 prev; for (word=1; word <= trie->wordcount; word++) { prev = 0; if (trie->wordinfo[word].prev) continue; state = trie->wordinfo[word].accept; while (state) { state = prev_states[state]; if (!state) break; prev = trie->states[state].wordnum; if (prev) break; } trie->wordinfo[word].prev = prev; } Safefree(prev_states); } /* and now dump out the compressed format */ DEBUG_TRIE_COMPILE_r(dump_trie(trie, widecharmap, revcharmap, depth+1)); RExC_rxi->data->data[ data_slot + 1 ] = (void*)widecharmap; #ifdef DEBUGGING RExC_rxi->data->data[ data_slot + TRIE_WORDS_OFFSET ] = (void*)trie_words; RExC_rxi->data->data[ data_slot + 3 ] = (void*)revcharmap; #else SvREFCNT_dec(revcharmap); #endif return trie->jump ? MADE_JUMP_TRIE : trie->startstate>1 ? MADE_EXACT_TRIE : MADE_TRIE; } STATIC void S_make_trie_failtable(pTHX_ RExC_state_t *pRExC_state, regnode *source, regnode *stclass, U32 depth) { /* The Trie is constructed and compressed now so we can build a fail array if it's needed This is basically the Aho-Corasick algorithm. Its from exercise 3.31 and 3.32 in the "Red Dragon" -- Compilers, principles, techniques, and tools. Aho, Sethi, Ullman 1985/88 ISBN 0-201-10088-6 We find the fail state for each state in the trie, this state is the longest proper suffix of the current state's 'word' that is also a proper prefix of another word in our trie. State 1 represents the word '' and is thus the default fail state. This allows the DFA not to have to restart after its tried and failed a word at a given point, it simply continues as though it had been matching the other word in the first place. Consider 'abcdgu'=~/abcdefg|cdgu/ When we get to 'd' we are still matching the first word, we would encounter 'g' which would fail, which would bring us to the state representing 'd' in the second word where we would try 'g' and succeed, proceeding to match 'cdgu'. */ /* add a fail transition */ const U32 trie_offset = ARG(source); reg_trie_data *trie=(reg_trie_data *)RExC_rxi->data->data[trie_offset]; U32 *q; const U32 ucharcount = trie->uniquecharcount; const U32 numstates = trie->statecount; const U32 ubound = trie->lasttrans + ucharcount; U32 q_read = 0; U32 q_write = 0; U32 charid; U32 base = trie->states[ 1 ].trans.base; U32 *fail; reg_ac_data *aho; const U32 data_slot = add_data( pRExC_state, 1, "T" ); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_MAKE_TRIE_FAILTABLE; #ifndef DEBUGGING PERL_UNUSED_ARG(depth); #endif ARG_SET( stclass, data_slot ); aho = (reg_ac_data *) PerlMemShared_calloc( 1, sizeof(reg_ac_data) ); RExC_rxi->data->data[ data_slot ] = (void*)aho; aho->trie=trie_offset; aho->states=(reg_trie_state *)PerlMemShared_malloc( numstates * sizeof(reg_trie_state) ); Copy( trie->states, aho->states, numstates, reg_trie_state ); Newxz( q, numstates, U32); aho->fail = (U32 *) PerlMemShared_calloc( numstates, sizeof(U32) ); aho->refcount = 1; fail = aho->fail; /* initialize fail[0..1] to be 1 so that we always have a valid final fail state */ fail[ 0 ] = fail[ 1 ] = 1; for ( charid = 0; charid < ucharcount ; charid++ ) { const U32 newstate = TRIE_TRANS_STATE( 1, base, ucharcount, charid, 0 ); if ( newstate ) { q[ q_write ] = newstate; /* set to point at the root */ fail[ q[ q_write++ ] ]=1; } } while ( q_read < q_write) { const U32 cur = q[ q_read++ % numstates ]; base = trie->states[ cur ].trans.base; for ( charid = 0 ; charid < ucharcount ; charid++ ) { const U32 ch_state = TRIE_TRANS_STATE( cur, base, ucharcount, charid, 1 ); if (ch_state) { U32 fail_state = cur; U32 fail_base; do { fail_state = fail[ fail_state ]; fail_base = aho->states[ fail_state ].trans.base; } while ( !TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 ) ); fail_state = TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 ); fail[ ch_state ] = fail_state; if ( !aho->states[ ch_state ].wordnum && aho->states[ fail_state ].wordnum ) { aho->states[ ch_state ].wordnum = aho->states[ fail_state ].wordnum; } q[ q_write++ % numstates] = ch_state; } } } /* restore fail[0..1] to 0 so that we "fall out" of the AC loop when we fail in state 1, this allows us to use the charclass scan to find a valid start char. This is based on the principle that theres a good chance the string being searched contains lots of stuff that cant be a start char. */ fail[ 0 ] = fail[ 1 ] = 0; DEBUG_TRIE_COMPILE_r({ PerlIO_printf(Perl_debug_log, "%*sStclass Failtable (%"UVuf" states): 0", (int)(depth * 2), "", (UV)numstates ); for( q_read=1; q_read%3d: %s (%d)\n", \ (int)depth*2, "", REG_NODE_NUM(scan), SvPV_nolen_const(mysv),\ Next ? (REG_NODE_NUM(Next)) : 0 ); \ }}); /* The below joins as many adjacent EXACTish nodes as possible into a single * one. The regop may be changed if the node(s) contain certain sequences that * require special handling. The joining is only done if: * 1) there is room in the current conglomerated node to entirely contain the * next one. * 2) they are the exact same node type * * The adjacent nodes actually may be separated by NOTHING-kind nodes, and * these get optimized out * * If a node is to match under /i (folded), the number of characters it matches * can be different than its character length if it contains a multi-character * fold. *min_subtract is set to the total delta of the input nodes. * * And *has_exactf_sharp_s is set to indicate whether or not the node is EXACTF * and contains LATIN SMALL LETTER SHARP S * * This is as good a place as any to discuss the design of handling these * multi-character fold sequences. It's been wrong in Perl for a very long * time. There are three code points in Unicode whose multi-character folds * were long ago discovered to mess things up. The previous designs for * dealing with these involved assigning a special node for them. This * approach doesn't work, as evidenced by this example: * "\xDFs" =~ /s\xDF/ui # Used to fail before these patches * Both these fold to "sss", but if the pattern is parsed to create a node that * would match just the \xDF, it won't be able to handle the case where a * successful match would have to cross the node's boundary. The new approach * that hopefully generally solves the problem generates an EXACTFU_SS node * that is "sss". * * It turns out that there are problems with all multi-character folds, and not * just these three. Now the code is general, for all such cases, but the * three still have some special handling. The approach taken is: * 1) This routine examines each EXACTFish node that could contain multi- * character fold sequences. It returns in *min_subtract how much to * subtract from the the actual length of the string to get a real minimum * match length; it is 0 if there are no multi-char folds. This delta is * used by the caller to adjust the min length of the match, and the delta * between min and max, so that the optimizer doesn't reject these * possibilities based on size constraints. * 2) Certain of these sequences require special handling by the trie code, * so, if found, this code changes the joined node type to special ops: * EXACTFU_TRICKYFOLD and EXACTFU_SS. * 3) For the sequence involving the Sharp s (\xDF), the node type EXACTFU_SS * is used for an EXACTFU node that contains at least one "ss" sequence in * it. For non-UTF-8 patterns and strings, this is the only case where * there is a possible fold length change. That means that a regular * EXACTFU node without UTF-8 involvement doesn't have to concern itself * with length changes, and so can be processed faster. regexec.c takes * advantage of this. Generally, an EXACTFish node that is in UTF-8 is * pre-folded by regcomp.c. This saves effort in regex matching. * However, the pre-folding isn't done for non-UTF8 patterns because the * fold of the MICRO SIGN requires UTF-8, and we don't want to slow things * down by forcing the pattern into UTF8 unless necessary. Also what * EXACTF and EXACTFL nodes fold to isn't known until runtime. The fold * possibilities for the non-UTF8 patterns are quite simple, except for * the sharp s. All the ones that don't involve a UTF-8 target string are * members of a fold-pair, and arrays are set up for all of them so that * the other member of the pair can be found quickly. Code elsewhere in * this file makes sure that in EXACTFU nodes, the sharp s gets folded to * 'ss', even if the pattern isn't UTF-8. This avoids the issues * described in the next item. * 4) A problem remains for the sharp s in EXACTF nodes. Whether it matches * 'ss' or not is not knowable at compile time. It will match iff the * target string is in UTF-8, unlike the EXACTFU nodes, where it always * matches; and the EXACTFL and EXACTFA nodes where it never does. Thus * it can't be folded to "ss" at compile time, unlike EXACTFU does (as * described in item 3). An assumption that the optimizer part of * regexec.c (probably unwittingly) makes is that a character in the * pattern corresponds to at most a single character in the target string. * (And I do mean character, and not byte here, unlike other parts of the * documentation that have never been updated to account for multibyte * Unicode.) This assumption is wrong only in this case, as all other * cases are either 1-1 folds when no UTF-8 is involved; or is true by * virtue of having this file pre-fold UTF-8 patterns. I'm * reluctant to try to change this assumption, so instead the code punts. * This routine examines EXACTF nodes for the sharp s, and returns a * boolean indicating whether or not the node is an EXACTF node that * contains a sharp s. When it is true, the caller sets a flag that later * causes the optimizer in this file to not set values for the floating * and fixed string lengths, and thus avoids the optimizer code in * regexec.c that makes the invalid assumption. Thus, there is no * optimization based on string lengths for EXACTF nodes that contain the * sharp s. This only happens for /id rules (which means the pattern * isn't in UTF-8). */ #define JOIN_EXACT(scan,min_subtract,has_exactf_sharp_s, flags) \ if (PL_regkind[OP(scan)] == EXACT) \ join_exact(pRExC_state,(scan),(min_subtract),has_exactf_sharp_s, (flags),NULL,depth+1) STATIC U32 S_join_exact(pTHX_ RExC_state_t *pRExC_state, regnode *scan, UV *min_subtract, bool *has_exactf_sharp_s, U32 flags,regnode *val, U32 depth) { /* Merge several consecutive EXACTish nodes into one. */ regnode *n = regnext(scan); U32 stringok = 1; regnode *next = scan + NODE_SZ_STR(scan); U32 merged = 0; U32 stopnow = 0; #ifdef DEBUGGING regnode *stop = scan; GET_RE_DEBUG_FLAGS_DECL; #else PERL_UNUSED_ARG(depth); #endif PERL_ARGS_ASSERT_JOIN_EXACT; #ifndef EXPERIMENTAL_INPLACESCAN PERL_UNUSED_ARG(flags); PERL_UNUSED_ARG(val); #endif DEBUG_PEEP("join",scan,depth); /* Look through the subsequent nodes in the chain. Skip NOTHING, merge * EXACT ones that are mergeable to the current one. */ while (n && (PL_regkind[OP(n)] == NOTHING || (stringok && OP(n) == OP(scan))) && NEXT_OFF(n) && NEXT_OFF(scan) + NEXT_OFF(n) < I16_MAX) { if (OP(n) == TAIL || n > next) stringok = 0; if (PL_regkind[OP(n)] == NOTHING) { DEBUG_PEEP("skip:",n,depth); NEXT_OFF(scan) += NEXT_OFF(n); next = n + NODE_STEP_REGNODE; #ifdef DEBUGGING if (stringok) stop = n; #endif n = regnext(n); } else if (stringok) { const unsigned int oldl = STR_LEN(scan); regnode * const nnext = regnext(n); /* XXX I (khw) kind of doubt that this works on platforms where * U8_MAX is above 255 because of lots of other assumptions */ if (oldl + STR_LEN(n) > U8_MAX) break; DEBUG_PEEP("merg",n,depth); merged++; NEXT_OFF(scan) += NEXT_OFF(n); STR_LEN(scan) += STR_LEN(n); next = n + NODE_SZ_STR(n); /* Now we can overwrite *n : */ Move(STRING(n), STRING(scan) + oldl, STR_LEN(n), char); #ifdef DEBUGGING stop = next - 1; #endif n = nnext; if (stopnow) break; } #ifdef EXPERIMENTAL_INPLACESCAN if (flags && !NEXT_OFF(n)) { DEBUG_PEEP("atch", val, depth); if (reg_off_by_arg[OP(n)]) { ARG_SET(n, val - n); } else { NEXT_OFF(n) = val - n; } stopnow = 1; } #endif } *min_subtract = 0; *has_exactf_sharp_s = FALSE; /* Here, all the adjacent mergeable EXACTish nodes have been merged. We * can now analyze for sequences of problematic code points. (Prior to * this final joining, sequences could have been split over boundaries, and * hence missed). The sequences only happen in folding, hence for any * non-EXACT EXACTish node */ if (OP(scan) != EXACT) { const U8 * const s0 = (U8*) STRING(scan); const U8 * s = s0; const U8 * const s_end = s0 + STR_LEN(scan); /* One pass is made over the node's string looking for all the * possibilities. to avoid some tests in the loop, there are two main * cases, for UTF-8 patterns (which can't have EXACTF nodes) and * non-UTF-8 */ if (UTF) { /* Examine the string for a multi-character fold sequence. UTF-8 * patterns have all characters pre-folded by the time this code is * executed */ while (s < s_end - 1) /* Can stop 1 before the end, as minimum length sequence we are looking for is 2 */ { int count = 0; int len = is_MULTI_CHAR_FOLD_utf8_safe(s, s_end); if (! len) { /* Not a multi-char fold: get next char */ s += UTF8SKIP(s); continue; } /* Nodes with 'ss' require special handling, except for EXACTFL * and EXACTFA for which there is no multi-char fold to this */ if (len == 2 && *s == 's' && *(s+1) == 's' && OP(scan) != EXACTFL && OP(scan) != EXACTFA) { count = 2; OP(scan) = EXACTFU_SS; s += 2; } else if (len == 6 /* len is the same in both ASCII and EBCDIC for these */ && (memEQ(s, GREEK_SMALL_LETTER_IOTA_UTF8 COMBINING_DIAERESIS_UTF8 COMBINING_ACUTE_ACCENT_UTF8, 6) || memEQ(s, GREEK_SMALL_LETTER_UPSILON_UTF8 COMBINING_DIAERESIS_UTF8 COMBINING_ACUTE_ACCENT_UTF8, 6))) { count = 3; /* These two folds require special handling by trie's, so * change the node type to indicate this. If EXACTFA and * EXACTFL were ever to be handled by trie's, this would * have to be changed. If this node has already been * changed to EXACTFU_SS in this loop, leave it as is. (I * (khw) think it doesn't matter in regexec.c for UTF * patterns, but no need to change it */ if (OP(scan) == EXACTFU) { OP(scan) = EXACTFU_TRICKYFOLD; } s += 6; } else { /* Here is a generic multi-char fold. */ const U8* multi_end = s + len; /* Count how many characters in it. In the case of /l and * /aa, no folds which contain ASCII code points are * allowed, so check for those, and skip if found. (In * EXACTFL, no folds are allowed to any Latin1 code point, * not just ASCII. But there aren't any of these * currently, nor ever likely, so don't take the time to * test for them. The code that generates the * is_MULTI_foo() macros croaks should one actually get put * into Unicode .) */ if (OP(scan) != EXACTFL && OP(scan) != EXACTFA) { count = utf8_length(s, multi_end); s = multi_end; } else { while (s < multi_end) { if (isASCII(*s)) { s++; goto next_iteration; } else { s += UTF8SKIP(s); } count++; } } } /* The delta is how long the sequence is minus 1 (1 is how long * the character that folds to the sequence is) */ *min_subtract += count - 1; next_iteration: ; } } else if (OP(scan) != EXACTFL && OP(scan) != EXACTFA) { /* Here, the pattern is not UTF-8. Look for the multi-char folds * that are all ASCII. As in the above case, EXACTFL and EXACTFA * nodes can't have multi-char folds to this range (and there are * no existing ones in the upper latin1 range). In the EXACTF * case we look also for the sharp s, which can be in the final * position. Otherwise we can stop looking 1 byte earlier because * have to find at least two characters for a multi-fold */ const U8* upper = (OP(scan) == EXACTF) ? s_end : s_end -1; /* The below is perhaps overboard, but this allows us to save a * test each time through the loop at the expense of a mask. This * is because on both EBCDIC and ASCII machines, 'S' and 's' differ * by a single bit. On ASCII they are 32 apart; on EBCDIC, they * are 64. This uses an exclusive 'or' to find that bit and then * inverts it to form a mask, with just a single 0, in the bit * position where 'S' and 's' differ. */ const U8 S_or_s_mask = (U8) ~ ('S' ^ 's'); const U8 s_masked = 's' & S_or_s_mask; while (s < upper) { int len = is_MULTI_CHAR_FOLD_latin1_safe(s, s_end); if (! len) { /* Not a multi-char fold. */ if (*s == LATIN_SMALL_LETTER_SHARP_S && OP(scan) == EXACTF) { *has_exactf_sharp_s = TRUE; } s++; continue; } if (len == 2 && ((*s & S_or_s_mask) == s_masked) && ((*(s+1) & S_or_s_mask) == s_masked)) { /* EXACTF nodes need to know that the minimum length * changed so that a sharp s in the string can match this * ss in the pattern, but they remain EXACTF nodes, as they * won't match this unless the target string is is UTF-8, * which we don't know until runtime */ if (OP(scan) != EXACTF) { OP(scan) = EXACTFU_SS; } } *min_subtract += len - 1; s += len; } } } #ifdef DEBUGGING /* Allow dumping but overwriting the collection of skipped * ops and/or strings with fake optimized ops */ n = scan + NODE_SZ_STR(scan); while (n <= stop) { OP(n) = OPTIMIZED; FLAGS(n) = 0; NEXT_OFF(n) = 0; n++; } #endif DEBUG_OPTIMISE_r(if (merged){DEBUG_PEEP("finl",scan,depth)}); return stopnow; } /* REx optimizer. Converts nodes into quicker variants "in place". Finds fixed substrings. */ /* Stops at toplevel WHILEM as well as at "last". At end *scanp is set to the position after last scanned or to NULL. */ #define INIT_AND_WITHP \ assert(!and_withp); \ Newx(and_withp,1,struct regnode_charclass_class); \ SAVEFREEPV(and_withp) /* this is a chain of data about sub patterns we are processing that need to be handled separately/specially in study_chunk. Its so we can simulate recursion without losing state. */ struct scan_frame; typedef struct scan_frame { regnode *last; /* last node to process in this frame */ regnode *next; /* next node to process when last is reached */ struct scan_frame *prev; /*previous frame*/ I32 stop; /* what stopparen do we use */ } scan_frame; #define SCAN_COMMIT(s, data, m) scan_commit(s, data, m, is_inf) #define CASE_SYNST_FNC(nAmE) \ case nAmE: \ if (flags & SCF_DO_STCLASS_AND) { \ for (value = 0; value < 256; value++) \ if (!is_ ## nAmE ## _cp(value)) \ ANYOF_BITMAP_CLEAR(data->start_class, value); \ } \ else { \ for (value = 0; value < 256; value++) \ if (is_ ## nAmE ## _cp(value)) \ ANYOF_BITMAP_SET(data->start_class, value); \ } \ break; \ case N ## nAmE: \ if (flags & SCF_DO_STCLASS_AND) { \ for (value = 0; value < 256; value++) \ if (is_ ## nAmE ## _cp(value)) \ ANYOF_BITMAP_CLEAR(data->start_class, value); \ } \ else { \ for (value = 0; value < 256; value++) \ if (!is_ ## nAmE ## _cp(value)) \ ANYOF_BITMAP_SET(data->start_class, value); \ } \ break STATIC I32 S_study_chunk(pTHX_ RExC_state_t *pRExC_state, regnode **scanp, I32 *minlenp, I32 *deltap, regnode *last, scan_data_t *data, I32 stopparen, U8* recursed, struct regnode_charclass_class *and_withp, U32 flags, U32 depth) /* scanp: Start here (read-write). */ /* deltap: Write maxlen-minlen here. */ /* last: Stop before this one. */ /* data: string data about the pattern */ /* stopparen: treat close N as END */ /* recursed: which subroutines have we recursed into */ /* and_withp: Valid if flags & SCF_DO_STCLASS_OR */ { dVAR; I32 min = 0; /* There must be at least this number of characters to match */ I32 pars = 0, code; regnode *scan = *scanp, *next; I32 delta = 0; int is_inf = (flags & SCF_DO_SUBSTR) && (data->flags & SF_IS_INF); int is_inf_internal = 0; /* The studied chunk is infinite */ I32 is_par = OP(scan) == OPEN ? ARG(scan) : 0; scan_data_t data_fake; SV *re_trie_maxbuff = NULL; regnode *first_non_open = scan; I32 stopmin = I32_MAX; scan_frame *frame = NULL; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_STUDY_CHUNK; #ifdef DEBUGGING StructCopy(&zero_scan_data, &data_fake, scan_data_t); #endif if ( depth == 0 ) { while (first_non_open && OP(first_non_open) == OPEN) first_non_open=regnext(first_non_open); } fake_study_recurse: while ( scan && OP(scan) != END && scan < last ){ UV min_subtract = 0; /* How mmany chars to subtract from the minimum node length to get a real minimum (because the folded version may be shorter) */ bool has_exactf_sharp_s = FALSE; /* Peephole optimizer: */ DEBUG_STUDYDATA("Peep:", data,depth); DEBUG_PEEP("Peep",scan,depth); /* Its not clear to khw or hv why this is done here, and not in the * clauses that deal with EXACT nodes. khw's guess is that it's * because of a previous design */ JOIN_EXACT(scan,&min_subtract, &has_exactf_sharp_s, 0); /* Follow the next-chain of the current node and optimize away all the NOTHINGs from it. */ if (OP(scan) != CURLYX) { const int max = (reg_off_by_arg[OP(scan)] ? I32_MAX /* I32 may be smaller than U16 on CRAYs! */ : (I32_MAX < U16_MAX ? I32_MAX : U16_MAX)); int off = (reg_off_by_arg[OP(scan)] ? ARG(scan) : NEXT_OFF(scan)); int noff; regnode *n = scan; /* Skip NOTHING and LONGJMP. */ while ((n = regnext(n)) && ((PL_regkind[OP(n)] == NOTHING && (noff = NEXT_OFF(n))) || ((OP(n) == LONGJMP) && (noff = ARG(n)))) && off + noff < max) off += noff; if (reg_off_by_arg[OP(scan)]) ARG(scan) = off; else NEXT_OFF(scan) = off; } /* The principal pseudo-switch. Cannot be a switch, since we look into several different things. */ if (OP(scan) == BRANCH || OP(scan) == BRANCHJ || OP(scan) == IFTHEN) { next = regnext(scan); code = OP(scan); /* demq: the op(next)==code check is to see if we have "branch-branch" AFAICT */ if (OP(next) == code || code == IFTHEN) { /* NOTE - There is similar code to this block below for handling TRIE nodes on a re-study. If you change stuff here check there too. */ I32 max1 = 0, min1 = I32_MAX, num = 0; struct regnode_charclass_class accum; regnode * const startbranch=scan; if (flags & SCF_DO_SUBSTR) SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot merge strings after this. */ if (flags & SCF_DO_STCLASS) cl_init_zero(pRExC_state, &accum); while (OP(scan) == code) { I32 deltanext, minnext, f = 0, fake; struct regnode_charclass_class this_class; num++; data_fake.flags = 0; if (data) { data_fake.whilem_c = data->whilem_c; data_fake.last_closep = data->last_closep; } else data_fake.last_closep = &fake; data_fake.pos_delta = delta; next = regnext(scan); scan = NEXTOPER(scan); if (code != BRANCH) scan = NEXTOPER(scan); if (flags & SCF_DO_STCLASS) { cl_init(pRExC_state, &this_class); data_fake.start_class = &this_class; f = SCF_DO_STCLASS_AND; } if (flags & SCF_WHILEM_VISITED_POS) f |= SCF_WHILEM_VISITED_POS; /* we suppose the run is continuous, last=next...*/ minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext, next, &data_fake, stopparen, recursed, NULL, f,depth+1); if (min1 > minnext) min1 = minnext; if (max1 < minnext + deltanext) max1 = minnext + deltanext; if (deltanext == I32_MAX) is_inf = is_inf_internal = 1; scan = next; if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR)) pars++; if (data_fake.flags & SCF_SEEN_ACCEPT) { if ( stopmin > minnext) stopmin = min + min1; flags &= ~SCF_DO_SUBSTR; if (data) data->flags |= SCF_SEEN_ACCEPT; } if (data) { if (data_fake.flags & SF_HAS_EVAL) data->flags |= SF_HAS_EVAL; data->whilem_c = data_fake.whilem_c; } if (flags & SCF_DO_STCLASS) cl_or(pRExC_state, &accum, &this_class); } if (code == IFTHEN && num < 2) /* Empty ELSE branch */ min1 = 0; if (flags & SCF_DO_SUBSTR) { data->pos_min += min1; data->pos_delta += max1 - min1; if (max1 != min1 || is_inf) data->longest = &(data->longest_float); } min += min1; delta += max1 - min1; if (flags & SCF_DO_STCLASS_OR) { cl_or(pRExC_state, data->start_class, &accum); if (min1) { cl_and(data->start_class, and_withp); flags &= ~SCF_DO_STCLASS; } } else if (flags & SCF_DO_STCLASS_AND) { if (min1) { cl_and(data->start_class, &accum); flags &= ~SCF_DO_STCLASS; } else { /* Switch to OR mode: cache the old value of * data->start_class */ INIT_AND_WITHP; StructCopy(data->start_class, and_withp, struct regnode_charclass_class); flags &= ~SCF_DO_STCLASS_AND; StructCopy(&accum, data->start_class, struct regnode_charclass_class); flags |= SCF_DO_STCLASS_OR; data->start_class->flags |= ANYOF_EOS; } } if (PERL_ENABLE_TRIE_OPTIMISATION && OP( startbranch ) == BRANCH ) { /* demq. Assuming this was/is a branch we are dealing with: 'scan' now points at the item that follows the branch sequence, whatever it is. We now start at the beginning of the sequence and look for subsequences of BRANCH->EXACT=>x1 BRANCH->EXACT=>x2 tail which would be constructed from a pattern like /A|LIST|OF|WORDS/ If we can find such a subsequence we need to turn the first element into a trie and then add the subsequent branch exact strings to the trie. We have two cases 1. patterns where the whole set of branches can be converted. 2. patterns where only a subset can be converted. In case 1 we can replace the whole set with a single regop for the trie. In case 2 we need to keep the start and end branches so 'BRANCH EXACT; BRANCH EXACT; BRANCH X' becomes BRANCH TRIE; BRANCH X; There is an additional case, that being where there is a common prefix, which gets split out into an EXACT like node preceding the TRIE node. If x(1..n)==tail then we can do a simple trie, if not we make a "jump" trie, such that when we match the appropriate word we "jump" to the appropriate tail node. Essentially we turn a nested if into a case structure of sorts. */ int made=0; if (!re_trie_maxbuff) { re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1); if (!SvIOK(re_trie_maxbuff)) sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT); } if ( SvIV(re_trie_maxbuff)>=0 ) { regnode *cur; regnode *first = (regnode *)NULL; regnode *last = (regnode *)NULL; regnode *tail = scan; U8 trietype = 0; U32 count=0; #ifdef DEBUGGING SV * const mysv = sv_newmortal(); /* for dumping */ #endif /* var tail is used because there may be a TAIL regop in the way. Ie, the exacts will point to the thing following the TAIL, but the last branch will point at the TAIL. So we advance tail. If we have nested (?:) we may have to move through several tails. */ while ( OP( tail ) == TAIL ) { /* this is the TAIL generated by (?:) */ tail = regnext( tail ); } DEBUG_TRIE_COMPILE_r({ regprop(RExC_rx, mysv, tail ); PerlIO_printf( Perl_debug_log, "%*s%s%s\n", (int)depth * 2 + 2, "", "Looking for TRIE'able sequences. Tail node is: ", SvPV_nolen_const( mysv ) ); }); /* Step through the branches cur represents each branch, noper is the first thing to be matched as part of that branch noper_next is the regnext() of that node. We normally handle a case like this /FOO[xyz]|BAR[pqr]/ via a "jump trie" but we also support building with NOJUMPTRIE, which restricts the trie logic to structures like /FOO|BAR/. If noper is a trieable nodetype then the branch is a possible optimization target. If we are building under NOJUMPTRIE then we require that noper_next is the same as scan (our current position in the regex program). Once we have two or more consecutive such branches we can create a trie of the EXACT's contents and stitch it in place into the program. If the sequence represents all of the branches in the alternation we replace the entire thing with a single TRIE node. Otherwise when it is a subsequence we need to stitch it in place and replace only the relevant branches. This means the first branch has to remain as it is used by the alternation logic, and its next pointer, and needs to be repointed at the item on the branch chain following the last branch we have optimized away. This could be either a BRANCH, in which case the subsequence is internal, or it could be the item following the branch sequence in which case the subsequence is at the end (which does not necessarily mean the first node is the start of the alternation). TRIE_TYPE(X) is a define which maps the optype to a trietype. optype | trietype ----------------+----------- NOTHING | NOTHING EXACT | EXACT EXACTFU | EXACTFU EXACTFU_SS | EXACTFU EXACTFU_TRICKYFOLD | EXACTFU EXACTFA | 0 */ #define TRIE_TYPE(X) ( ( NOTHING == (X) ) ? NOTHING : \ ( EXACT == (X) ) ? EXACT : \ ( EXACTFU == (X) || EXACTFU_SS == (X) || EXACTFU_TRICKYFOLD == (X) ) ? EXACTFU : \ 0 ) /* dont use tail as the end marker for this traverse */ for ( cur = startbranch ; cur != scan ; cur = regnext( cur ) ) { regnode * const noper = NEXTOPER( cur ); U8 noper_type = OP( noper ); U8 noper_trietype = TRIE_TYPE( noper_type ); #if defined(DEBUGGING) || defined(NOJUMPTRIE) regnode * const noper_next = regnext( noper ); U8 noper_next_type = (noper_next && noper_next != tail) ? OP(noper_next) : 0; U8 noper_next_trietype = (noper_next && noper_next != tail) ? TRIE_TYPE( noper_next_type ) :0; #endif DEBUG_TRIE_COMPILE_r({ regprop(RExC_rx, mysv, cur); PerlIO_printf( Perl_debug_log, "%*s- %s (%d)", (int)depth * 2 + 2,"", SvPV_nolen_const( mysv ), REG_NODE_NUM(cur) ); regprop(RExC_rx, mysv, noper); PerlIO_printf( Perl_debug_log, " -> %s", SvPV_nolen_const(mysv)); if ( noper_next ) { regprop(RExC_rx, mysv, noper_next ); PerlIO_printf( Perl_debug_log,"\t=> %s\t", SvPV_nolen_const(mysv)); } PerlIO_printf( Perl_debug_log, "(First==%d,Last==%d,Cur==%d,tt==%s,nt==%s,nnt==%s)\n", REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(cur), PL_reg_name[trietype], PL_reg_name[noper_trietype], PL_reg_name[noper_next_trietype] ); }); /* Is noper a trieable nodetype that can be merged with the * current trie (if there is one)? */ if ( noper_trietype && ( ( noper_trietype == NOTHING) || ( trietype == NOTHING ) || ( trietype == noper_trietype ) ) #ifdef NOJUMPTRIE && noper_next == tail #endif && count < U16_MAX) { /* Handle mergable triable node * Either we are the first node in a new trieable sequence, * in which case we do some bookkeeping, otherwise we update * the end pointer. */ if ( !first ) { first = cur; if ( noper_trietype == NOTHING ) { #if !defined(DEBUGGING) && !defined(NOJUMPTRIE) regnode * const noper_next = regnext( noper ); U8 noper_next_type = (noper_next && noper_next!=tail) ? OP(noper_next) : 0; U8 noper_next_trietype = noper_next_type ? TRIE_TYPE( noper_next_type ) :0; #endif if ( noper_next_trietype ) { trietype = noper_next_trietype; } else if (noper_next_type) { /* a NOTHING regop is 1 regop wide. We need at least two * for a trie so we can't merge this in */ first = NULL; } } else { trietype = noper_trietype; } } else { if ( trietype == NOTHING ) trietype = noper_trietype; last = cur; } if (first) count++; } /* end handle mergable triable node */ else { /* handle unmergable node - * noper may either be a triable node which can not be tried * together with the current trie, or a non triable node */ if ( last ) { /* If last is set and trietype is not NOTHING then we have found * at least two triable branch sequences in a row of a similar * trietype so we can turn them into a trie. If/when we * allow NOTHING to start a trie sequence this condition will be * required, and it isn't expensive so we leave it in for now. */ if ( trietype && trietype != NOTHING ) make_trie( pRExC_state, startbranch, first, cur, tail, count, trietype, depth+1 ); last = NULL; /* note: we clear/update first, trietype etc below, so we dont do it here */ } if ( noper_trietype #ifdef NOJUMPTRIE && noper_next == tail #endif ){ /* noper is triable, so we can start a new trie sequence */ count = 1; first = cur; trietype = noper_trietype; } else if (first) { /* if we already saw a first but the current node is not triable then we have * to reset the first information. */ count = 0; first = NULL; trietype = 0; } } /* end handle unmergable node */ } /* loop over branches */ DEBUG_TRIE_COMPILE_r({ regprop(RExC_rx, mysv, cur); PerlIO_printf( Perl_debug_log, "%*s- %s (%d) \n", (int)depth * 2 + 2, "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur)); }); if ( last && trietype ) { if ( trietype != NOTHING ) { /* the last branch of the sequence was part of a trie, * so we have to construct it here outside of the loop */ made= make_trie( pRExC_state, startbranch, first, scan, tail, count, trietype, depth+1 ); #ifdef TRIE_STUDY_OPT if ( ((made == MADE_EXACT_TRIE && startbranch == first) || ( first_non_open == first )) && depth==0 ) { flags |= SCF_TRIE_RESTUDY; if ( startbranch == first && scan == tail ) { RExC_seen &=~REG_TOP_LEVEL_BRANCHES; } } #endif } else { /* at this point we know whatever we have is a NOTHING sequence/branch * AND if 'startbranch' is 'first' then we can turn the whole thing into a NOTHING */ if ( startbranch == first ) { regnode *opt; /* the entire thing is a NOTHING sequence, something like this: * (?:|) So we can turn it into a plain NOTHING op. */ DEBUG_TRIE_COMPILE_r({ regprop(RExC_rx, mysv, cur); PerlIO_printf( Perl_debug_log, "%*s- %s (%d) \n", (int)depth * 2 + 2, "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur)); }); OP(startbranch)= NOTHING; NEXT_OFF(startbranch)= tail - startbranch; for ( opt= startbranch + 1; opt < tail ; opt++ ) OP(opt)= OPTIMIZED; } } } /* end if ( last) */ } /* TRIE_MAXBUF is non zero */ } /* do trie */ } else if ( code == BRANCHJ ) { /* single branch is optimized. */ scan = NEXTOPER(NEXTOPER(scan)); } else /* single branch is optimized. */ scan = NEXTOPER(scan); continue; } else if (OP(scan) == SUSPEND || OP(scan) == GOSUB || OP(scan) == GOSTART) { scan_frame *newframe = NULL; I32 paren; regnode *start; regnode *end; if (OP(scan) != SUSPEND) { /* set the pointer */ if (OP(scan) == GOSUB) { paren = ARG(scan); RExC_recurse[ARG2L(scan)] = scan; start = RExC_open_parens[paren-1]; end = RExC_close_parens[paren-1]; } else { paren = 0; start = RExC_rxi->program + 1; end = RExC_opend; } if (!recursed) { Newxz(recursed, (((RExC_npar)>>3) +1), U8); SAVEFREEPV(recursed); } if (!PAREN_TEST(recursed,paren+1)) { PAREN_SET(recursed,paren+1); Newx(newframe,1,scan_frame); } else { if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); data->longest = &(data->longest_float); } is_inf = is_inf_internal = 1; if (flags & SCF_DO_STCLASS_OR) /* Allow everything */ cl_anything(pRExC_state, data->start_class); flags &= ~SCF_DO_STCLASS; } } else { Newx(newframe,1,scan_frame); paren = stopparen; start = scan+2; end = regnext(scan); } if (newframe) { assert(start); assert(end); SAVEFREEPV(newframe); newframe->next = regnext(scan); newframe->last = last; newframe->stop = stopparen; newframe->prev = frame; frame = newframe; scan = start; stopparen = paren; last = end; continue; } } else if (OP(scan) == EXACT) { I32 l = STR_LEN(scan); UV uc; if (UTF) { const U8 * const s = (U8*)STRING(scan); uc = utf8_to_uvchr_buf(s, s + l, NULL); l = utf8_length(s, s + l); } else { uc = *((U8*)STRING(scan)); } min += l; if (flags & SCF_DO_SUBSTR) { /* Update longest substr. */ /* The code below prefers earlier match for fixed offset, later match for variable offset. */ if (data->last_end == -1) { /* Update the start info. */ data->last_start_min = data->pos_min; data->last_start_max = is_inf ? I32_MAX : data->pos_min + data->pos_delta; } sv_catpvn(data->last_found, STRING(scan), STR_LEN(scan)); if (UTF) SvUTF8_on(data->last_found); { SV * const sv = data->last_found; MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ? mg_find(sv, PERL_MAGIC_utf8) : NULL; if (mg && mg->mg_len >= 0) mg->mg_len += utf8_length((U8*)STRING(scan), (U8*)STRING(scan)+STR_LEN(scan)); } data->last_end = data->pos_min + l; data->pos_min += l; /* As in the first entry. */ data->flags &= ~SF_BEFORE_EOL; } if (flags & SCF_DO_STCLASS_AND) { /* Check whether it is compatible with what we know already! */ int compat = 1; /* If compatible, we or it in below. It is compatible if is * in the bitmp and either 1) its bit or its fold is set, or 2) * it's for a locale. Even if there isn't unicode semantics * here, at runtime there may be because of matching against a * utf8 string, so accept a possible false positive for * latin1-range folds */ if (uc >= 0x100 || (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE)) && !ANYOF_BITMAP_TEST(data->start_class, uc) && (!(data->start_class->flags & ANYOF_LOC_FOLD) || !ANYOF_BITMAP_TEST(data->start_class, PL_fold_latin1[uc]))) ) { compat = 0; } ANYOF_CLASS_ZERO(data->start_class); ANYOF_BITMAP_ZERO(data->start_class); if (compat) ANYOF_BITMAP_SET(data->start_class, uc); else if (uc >= 0x100) { int i; /* Some Unicode code points fold to the Latin1 range; as * XXX temporary code, instead of figuring out if this is * one, just assume it is and set all the start class bits * that could be some such above 255 code point's fold * which will generate fals positives. As the code * elsewhere that does compute the fold settles down, it * can be extracted out and re-used here */ for (i = 0; i < 256; i++){ if (HAS_NONLATIN1_FOLD_CLOSURE(i)) { ANYOF_BITMAP_SET(data->start_class, i); } } } data->start_class->flags &= ~ANYOF_EOS; if (uc < 0x100) data->start_class->flags &= ~ANYOF_UNICODE_ALL; } else if (flags & SCF_DO_STCLASS_OR) { /* false positive possible if the class is case-folded */ if (uc < 0x100) ANYOF_BITMAP_SET(data->start_class, uc); else data->start_class->flags |= ANYOF_UNICODE_ALL; data->start_class->flags &= ~ANYOF_EOS; cl_and(data->start_class, and_withp); } flags &= ~SCF_DO_STCLASS; } else if (PL_regkind[OP(scan)] == EXACT) { /* But OP != EXACT! */ I32 l = STR_LEN(scan); UV uc = *((U8*)STRING(scan)); /* Search for fixed substrings supports EXACT only. */ if (flags & SCF_DO_SUBSTR) { assert(data); SCAN_COMMIT(pRExC_state, data, minlenp); } if (UTF) { const U8 * const s = (U8 *)STRING(scan); uc = utf8_to_uvchr_buf(s, s + l, NULL); l = utf8_length(s, s + l); } if (has_exactf_sharp_s) { RExC_seen |= REG_SEEN_EXACTF_SHARP_S; } min += l - min_subtract; assert (min >= 0); delta += min_subtract; if (flags & SCF_DO_SUBSTR) { data->pos_min += l - min_subtract; if (data->pos_min < 0) { data->pos_min = 0; } data->pos_delta += min_subtract; if (min_subtract) { data->longest = &(data->longest_float); } } if (flags & SCF_DO_STCLASS_AND) { /* Check whether it is compatible with what we know already! */ int compat = 1; if (uc >= 0x100 || (!(data->start_class->flags & (ANYOF_CLASS | ANYOF_LOCALE)) && !ANYOF_BITMAP_TEST(data->start_class, uc) && !ANYOF_BITMAP_TEST(data->start_class, PL_fold_latin1[uc]))) { compat = 0; } ANYOF_CLASS_ZERO(data->start_class); ANYOF_BITMAP_ZERO(data->start_class); if (compat) { ANYOF_BITMAP_SET(data->start_class, uc); data->start_class->flags &= ~ANYOF_EOS; if (OP(scan) == EXACTFL) { /* XXX This set is probably no longer necessary, and * probably wrong as LOCALE now is on in the initial * state */ data->start_class->flags |= ANYOF_LOCALE|ANYOF_LOC_FOLD; } else { /* Also set the other member of the fold pair. In case * that unicode semantics is called for at runtime, use * the full latin1 fold. (Can't do this for locale, * because not known until runtime) */ ANYOF_BITMAP_SET(data->start_class, PL_fold_latin1[uc]); /* All other (EXACTFL handled above) folds except under * /iaa that include s, S, and sharp_s also may include * the others */ if (OP(scan) != EXACTFA) { if (uc == 's' || uc == 'S') { ANYOF_BITMAP_SET(data->start_class, LATIN_SMALL_LETTER_SHARP_S); } else if (uc == LATIN_SMALL_LETTER_SHARP_S) { ANYOF_BITMAP_SET(data->start_class, 's'); ANYOF_BITMAP_SET(data->start_class, 'S'); } } } } else if (uc >= 0x100) { int i; for (i = 0; i < 256; i++){ if (_HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)) { ANYOF_BITMAP_SET(data->start_class, i); } } } } else if (flags & SCF_DO_STCLASS_OR) { if (data->start_class->flags & ANYOF_LOC_FOLD) { /* false positive possible if the class is case-folded. Assume that the locale settings are the same... */ if (uc < 0x100) { ANYOF_BITMAP_SET(data->start_class, uc); if (OP(scan) != EXACTFL) { /* And set the other member of the fold pair, but * can't do that in locale because not known until * run-time */ ANYOF_BITMAP_SET(data->start_class, PL_fold_latin1[uc]); /* All folds except under /iaa that include s, S, * and sharp_s also may include the others */ if (OP(scan) != EXACTFA) { if (uc == 's' || uc == 'S') { ANYOF_BITMAP_SET(data->start_class, LATIN_SMALL_LETTER_SHARP_S); } else if (uc == LATIN_SMALL_LETTER_SHARP_S) { ANYOF_BITMAP_SET(data->start_class, 's'); ANYOF_BITMAP_SET(data->start_class, 'S'); } } } } data->start_class->flags &= ~ANYOF_EOS; } cl_and(data->start_class, and_withp); } flags &= ~SCF_DO_STCLASS; } else if (REGNODE_VARIES(OP(scan))) { I32 mincount, maxcount, minnext, deltanext, fl = 0; I32 f = flags, pos_before = 0; regnode * const oscan = scan; struct regnode_charclass_class this_class; struct regnode_charclass_class *oclass = NULL; I32 next_is_eval = 0; switch (PL_regkind[OP(scan)]) { case WHILEM: /* End of (?:...)* . */ scan = NEXTOPER(scan); goto finish; case PLUS: if (flags & (SCF_DO_SUBSTR | SCF_DO_STCLASS)) { next = NEXTOPER(scan); if (OP(next) == EXACT || (flags & SCF_DO_STCLASS)) { mincount = 1; maxcount = REG_INFTY; next = regnext(scan); scan = NEXTOPER(scan); goto do_curly; } } if (flags & SCF_DO_SUBSTR) data->pos_min++; min++; /* Fall through. */ case STAR: if (flags & SCF_DO_STCLASS) { mincount = 0; maxcount = REG_INFTY; next = regnext(scan); scan = NEXTOPER(scan); goto do_curly; } is_inf = is_inf_internal = 1; scan = regnext(scan); if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot extend fixed substrings */ data->longest = &(data->longest_float); } goto optimize_curly_tail; case CURLY: if (stopparen>0 && (OP(scan)==CURLYN || OP(scan)==CURLYM) && (scan->flags == stopparen)) { mincount = 1; maxcount = 1; } else { mincount = ARG1(scan); maxcount = ARG2(scan); } next = regnext(scan); if (OP(scan) == CURLYX) { I32 lp = (data ? *(data->last_closep) : 0); scan->flags = ((lp <= (I32)U8_MAX) ? (U8)lp : U8_MAX); } scan = NEXTOPER(scan) + EXTRA_STEP_2ARGS; next_is_eval = (OP(scan) == EVAL); do_curly: if (flags & SCF_DO_SUBSTR) { if (mincount == 0) SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot extend fixed substrings */ pos_before = data->pos_min; } if (data) { fl = data->flags; data->flags &= ~(SF_HAS_PAR|SF_IN_PAR|SF_HAS_EVAL); if (is_inf) data->flags |= SF_IS_INF; } if (flags & SCF_DO_STCLASS) { cl_init(pRExC_state, &this_class); oclass = data->start_class; data->start_class = &this_class; f |= SCF_DO_STCLASS_AND; f &= ~SCF_DO_STCLASS_OR; } /* Exclude from super-linear cache processing any {n,m} regops for which the combination of input pos and regex pos is not enough information to determine if a match will be possible. For example, in the regex /foo(bar\s*){4,8}baz/ with the regex pos at the \s*, the prospects for a match depend not only on the input position but also on how many (bar\s*) repeats into the {4,8} we are. */ if ((mincount > 1) || (maxcount > 1 && maxcount != REG_INFTY)) f &= ~SCF_WHILEM_VISITED_POS; /* This will finish on WHILEM, setting scan, or on NULL: */ minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext, last, data, stopparen, recursed, NULL, (mincount == 0 ? (f & ~SCF_DO_SUBSTR) : f),depth+1); if (flags & SCF_DO_STCLASS) data->start_class = oclass; if (mincount == 0 || minnext == 0) { if (flags & SCF_DO_STCLASS_OR) { cl_or(pRExC_state, data->start_class, &this_class); } else if (flags & SCF_DO_STCLASS_AND) { /* Switch to OR mode: cache the old value of * data->start_class */ INIT_AND_WITHP; StructCopy(data->start_class, and_withp, struct regnode_charclass_class); flags &= ~SCF_DO_STCLASS_AND; StructCopy(&this_class, data->start_class, struct regnode_charclass_class); flags |= SCF_DO_STCLASS_OR; data->start_class->flags |= ANYOF_EOS; } } else { /* Non-zero len */ if (flags & SCF_DO_STCLASS_OR) { cl_or(pRExC_state, data->start_class, &this_class); cl_and(data->start_class, and_withp); } else if (flags & SCF_DO_STCLASS_AND) cl_and(data->start_class, &this_class); flags &= ~SCF_DO_STCLASS; } if (!scan) /* It was not CURLYX, but CURLY. */ scan = next; if ( /* ? quantifier ok, except for (?{ ... }) */ (next_is_eval || !(mincount == 0 && maxcount == 1)) && (minnext == 0) && (deltanext == 0) && data && !(data->flags & (SF_HAS_PAR|SF_IN_PAR)) && maxcount <= REG_INFTY/3) /* Complement check for big count */ { ckWARNreg(RExC_parse, "Quantifier unexpected on zero-length expression"); } min += minnext * mincount; is_inf_internal |= ((maxcount == REG_INFTY && (minnext + deltanext) > 0) || deltanext == I32_MAX); is_inf |= is_inf_internal; delta += (minnext + deltanext) * maxcount - minnext * mincount; /* Try powerful optimization CURLYX => CURLYN. */ if ( OP(oscan) == CURLYX && data && data->flags & SF_IN_PAR && !(data->flags & SF_HAS_EVAL) && !deltanext && minnext == 1 ) { /* Try to optimize to CURLYN. */ regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; regnode * const nxt1 = nxt; #ifdef DEBUGGING regnode *nxt2; #endif /* Skip open. */ nxt = regnext(nxt); if (!REGNODE_SIMPLE(OP(nxt)) && !(PL_regkind[OP(nxt)] == EXACT && STR_LEN(nxt) == 1)) goto nogo; #ifdef DEBUGGING nxt2 = nxt; #endif nxt = regnext(nxt); if (OP(nxt) != CLOSE) goto nogo; if (RExC_open_parens) { RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/ RExC_close_parens[ARG(nxt1)-1]=nxt+2; /*close->while*/ } /* Now we know that nxt2 is the only contents: */ oscan->flags = (U8)ARG(nxt); OP(oscan) = CURLYN; OP(nxt1) = NOTHING; /* was OPEN. */ #ifdef DEBUGGING OP(nxt1 + 1) = OPTIMIZED; /* was count. */ NEXT_OFF(nxt1+ 1) = 0; /* just for consistency. */ NEXT_OFF(nxt2) = 0; /* just for consistency with CURLY. */ OP(nxt) = OPTIMIZED; /* was CLOSE. */ OP(nxt + 1) = OPTIMIZED; /* was count. */ NEXT_OFF(nxt+ 1) = 0; /* just for consistency. */ #endif } nogo: /* Try optimization CURLYX => CURLYM. */ if ( OP(oscan) == CURLYX && data && !(data->flags & SF_HAS_PAR) && !(data->flags & SF_HAS_EVAL) && !deltanext /* atom is fixed width */ && minnext != 0 /* CURLYM can't handle zero width */ && ! (RExC_seen & REG_SEEN_EXACTF_SHARP_S) /* Nor \xDF */ ) { /* XXXX How to optimize if data == 0? */ /* Optimize to a simpler form. */ regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN */ regnode *nxt2; OP(oscan) = CURLYM; while ( (nxt2 = regnext(nxt)) /* skip over embedded stuff*/ && (OP(nxt2) != WHILEM)) nxt = nxt2; OP(nxt2) = SUCCEED; /* Whas WHILEM */ /* Need to optimize away parenths. */ if ((data->flags & SF_IN_PAR) && OP(nxt) == CLOSE) { /* Set the parenth number. */ regnode *nxt1 = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN*/ oscan->flags = (U8)ARG(nxt); if (RExC_open_parens) { RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/ RExC_close_parens[ARG(nxt1)-1]=nxt2+1; /*close->NOTHING*/ } OP(nxt1) = OPTIMIZED; /* was OPEN. */ OP(nxt) = OPTIMIZED; /* was CLOSE. */ #ifdef DEBUGGING OP(nxt1 + 1) = OPTIMIZED; /* was count. */ OP(nxt + 1) = OPTIMIZED; /* was count. */ NEXT_OFF(nxt1 + 1) = 0; /* just for consistency. */ NEXT_OFF(nxt + 1) = 0; /* just for consistency. */ #endif #if 0 while ( nxt1 && (OP(nxt1) != WHILEM)) { regnode *nnxt = regnext(nxt1); if (nnxt == nxt) { if (reg_off_by_arg[OP(nxt1)]) ARG_SET(nxt1, nxt2 - nxt1); else if (nxt2 - nxt1 < U16_MAX) NEXT_OFF(nxt1) = nxt2 - nxt1; else OP(nxt) = NOTHING; /* Cannot beautify */ } nxt1 = nnxt; } #endif /* Optimize again: */ study_chunk(pRExC_state, &nxt1, minlenp, &deltanext, nxt, NULL, stopparen, recursed, NULL, 0,depth+1); } else oscan->flags = 0; } else if ((OP(oscan) == CURLYX) && (flags & SCF_WHILEM_VISITED_POS) /* See the comment on a similar expression above. However, this time it's not a subexpression we care about, but the expression itself. */ && (maxcount == REG_INFTY) && data && ++data->whilem_c < 16) { /* This stays as CURLYX, we can put the count/of pair. */ /* Find WHILEM (as in regexec.c) */ regnode *nxt = oscan + NEXT_OFF(oscan); if (OP(PREVOPER(nxt)) == NOTHING) /* LONGJMP */ nxt += ARG(nxt); PREVOPER(nxt)->flags = (U8)(data->whilem_c | (RExC_whilem_seen << 4)); /* On WHILEM */ } if (data && fl & (SF_HAS_PAR|SF_IN_PAR)) pars++; if (flags & SCF_DO_SUBSTR) { SV *last_str = NULL; int counted = mincount != 0; if (data->last_end > 0 && mincount != 0) { /* Ends with a string. */ #if defined(SPARC64_GCC_WORKAROUND) I32 b = 0; STRLEN l = 0; const char *s = NULL; I32 old = 0; if (pos_before >= data->last_start_min) b = pos_before; else b = data->last_start_min; l = 0; s = SvPV_const(data->last_found, l); old = b - data->last_start_min; #else I32 b = pos_before >= data->last_start_min ? pos_before : data->last_start_min; STRLEN l; const char * const s = SvPV_const(data->last_found, l); I32 old = b - data->last_start_min; #endif if (UTF) old = utf8_hop((U8*)s, old) - (U8*)s; l -= old; /* Get the added string: */ last_str = newSVpvn_utf8(s + old, l, UTF); if (deltanext == 0 && pos_before == b) { /* What was added is a constant string */ if (mincount > 1) { SvGROW(last_str, (mincount * l) + 1); repeatcpy(SvPVX(last_str) + l, SvPVX_const(last_str), l, mincount - 1); SvCUR_set(last_str, SvCUR(last_str) * mincount); /* Add additional parts. */ SvCUR_set(data->last_found, SvCUR(data->last_found) - l); sv_catsv(data->last_found, last_str); { SV * sv = data->last_found; MAGIC *mg = SvUTF8(sv) && SvMAGICAL(sv) ? mg_find(sv, PERL_MAGIC_utf8) : NULL; if (mg && mg->mg_len >= 0) mg->mg_len += CHR_SVLEN(last_str) - l; } data->last_end += l * (mincount - 1); } } else { /* start offset must point into the last copy */ data->last_start_min += minnext * (mincount - 1); data->last_start_max += is_inf ? I32_MAX : (maxcount - 1) * (minnext + data->pos_delta); } } /* It is counted once already... */ data->pos_min += minnext * (mincount - counted); data->pos_delta += - counted * deltanext + (minnext + deltanext) * maxcount - minnext * mincount; if (mincount != maxcount) { /* Cannot extend fixed substrings found inside the group. */ SCAN_COMMIT(pRExC_state,data,minlenp); if (mincount && last_str) { SV * const sv = data->last_found; MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ? mg_find(sv, PERL_MAGIC_utf8) : NULL; if (mg) mg->mg_len = -1; sv_setsv(sv, last_str); data->last_end = data->pos_min; data->last_start_min = data->pos_min - CHR_SVLEN(last_str); data->last_start_max = is_inf ? I32_MAX : data->pos_min + data->pos_delta - CHR_SVLEN(last_str); } data->longest = &(data->longest_float); } SvREFCNT_dec(last_str); } if (data && (fl & SF_HAS_EVAL)) data->flags |= SF_HAS_EVAL; optimize_curly_tail: if (OP(oscan) != CURLYX) { while (PL_regkind[OP(next = regnext(oscan))] == NOTHING && NEXT_OFF(next)) NEXT_OFF(oscan) += NEXT_OFF(next); } continue; default: /* REF, ANYOFV, and CLUMP only? */ if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */ data->longest = &(data->longest_float); } is_inf = is_inf_internal = 1; if (flags & SCF_DO_STCLASS_OR) cl_anything(pRExC_state, data->start_class); flags &= ~SCF_DO_STCLASS; break; } } else if (OP(scan) == LNBREAK) { if (flags & SCF_DO_STCLASS) { int value = 0; data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */ if (flags & SCF_DO_STCLASS_AND) { for (value = 0; value < 256; value++) if (!is_VERTWS_cp(value)) ANYOF_BITMAP_CLEAR(data->start_class, value); } else { for (value = 0; value < 256; value++) if (is_VERTWS_cp(value)) ANYOF_BITMAP_SET(data->start_class, value); } if (flags & SCF_DO_STCLASS_OR) cl_and(data->start_class, and_withp); flags &= ~SCF_DO_STCLASS; } min++; delta++; /* Because of the 2 char string cr-lf */ if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */ data->pos_min += 1; data->pos_delta += 1; data->longest = &(data->longest_float); } } else if (REGNODE_SIMPLE(OP(scan))) { int value = 0; if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); data->pos_min++; } min++; if (flags & SCF_DO_STCLASS) { data->start_class->flags &= ~ANYOF_EOS; /* No match on empty */ /* Some of the logic below assumes that switching locale on will only add false positives. */ switch (PL_regkind[OP(scan)]) { case SANY: default: do_default: /* Perl_croak(aTHX_ "panic: unexpected simple REx opcode %d", OP(scan)); */ if (flags & SCF_DO_STCLASS_OR) /* Allow everything */ cl_anything(pRExC_state, data->start_class); break; case REG_ANY: if (OP(scan) == SANY) goto do_default; if (flags & SCF_DO_STCLASS_OR) { /* Everything but \n */ value = (ANYOF_BITMAP_TEST(data->start_class,'\n') || ANYOF_CLASS_TEST_ANY_SET(data->start_class)); cl_anything(pRExC_state, data->start_class); } if (flags & SCF_DO_STCLASS_AND || !value) ANYOF_BITMAP_CLEAR(data->start_class,'\n'); break; case ANYOF: if (flags & SCF_DO_STCLASS_AND) cl_and(data->start_class, (struct regnode_charclass_class*)scan); else cl_or(pRExC_state, data->start_class, (struct regnode_charclass_class*)scan); break; case ALNUM: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) { ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NWORDCHAR); if (OP(scan) == ALNUMU) { for (value = 0; value < 256; value++) { if (!isWORDCHAR_L1(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (!isALNUM(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } } } else { if (data->start_class->flags & ANYOF_LOCALE) ANYOF_CLASS_SET(data->start_class,ANYOF_WORDCHAR); /* Even if under locale, set the bits for non-locale * in case it isn't a true locale-node. This will * create false positives if it truly is locale */ if (OP(scan) == ALNUMU) { for (value = 0; value < 256; value++) { if (isWORDCHAR_L1(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (isALNUM(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } } break; case NALNUM: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) { ANYOF_CLASS_CLEAR(data->start_class,ANYOF_WORDCHAR); if (OP(scan) == NALNUMU) { for (value = 0; value < 256; value++) { if (isWORDCHAR_L1(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (isALNUM(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } } } else { if (data->start_class->flags & ANYOF_LOCALE) ANYOF_CLASS_SET(data->start_class,ANYOF_NWORDCHAR); /* Even if under locale, set the bits for non-locale in * case it isn't a true locale-node. This will create * false positives if it truly is locale */ if (OP(scan) == NALNUMU) { for (value = 0; value < 256; value++) { if (! isWORDCHAR_L1(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (! isALNUM(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } } break; case SPACE: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) { ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NSPACE); if (OP(scan) == SPACEU) { for (value = 0; value < 256; value++) { if (!isSPACE_L1(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (!isSPACE(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } } } else { if (data->start_class->flags & ANYOF_LOCALE) { ANYOF_CLASS_SET(data->start_class,ANYOF_SPACE); } if (OP(scan) == SPACEU) { for (value = 0; value < 256; value++) { if (isSPACE_L1(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (isSPACE(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } } break; case NSPACE: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) { ANYOF_CLASS_CLEAR(data->start_class,ANYOF_SPACE); if (OP(scan) == NSPACEU) { for (value = 0; value < 256; value++) { if (isSPACE_L1(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (isSPACE(value)) { ANYOF_BITMAP_CLEAR(data->start_class, value); } } } } } else { if (data->start_class->flags & ANYOF_LOCALE) ANYOF_CLASS_SET(data->start_class,ANYOF_NSPACE); if (OP(scan) == NSPACEU) { for (value = 0; value < 256; value++) { if (!isSPACE_L1(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } else { for (value = 0; value < 256; value++) { if (!isSPACE(value)) { ANYOF_BITMAP_SET(data->start_class, value); } } } } break; case DIGIT: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) { ANYOF_CLASS_CLEAR(data->start_class,ANYOF_NDIGIT); for (value = 0; value < 256; value++) if (!isDIGIT(value)) ANYOF_BITMAP_CLEAR(data->start_class, value); } } else { if (data->start_class->flags & ANYOF_LOCALE) ANYOF_CLASS_SET(data->start_class,ANYOF_DIGIT); for (value = 0; value < 256; value++) if (isDIGIT(value)) ANYOF_BITMAP_SET(data->start_class, value); } break; case NDIGIT: if (flags & SCF_DO_STCLASS_AND) { if (!(data->start_class->flags & ANYOF_LOCALE)) ANYOF_CLASS_CLEAR(data->start_class,ANYOF_DIGIT); for (value = 0; value < 256; value++) if (isDIGIT(value)) ANYOF_BITMAP_CLEAR(data->start_class, value); } else { if (data->start_class->flags & ANYOF_LOCALE) ANYOF_CLASS_SET(data->start_class,ANYOF_NDIGIT); for (value = 0; value < 256; value++) if (!isDIGIT(value)) ANYOF_BITMAP_SET(data->start_class, value); } break; CASE_SYNST_FNC(VERTWS); CASE_SYNST_FNC(HORIZWS); } if (flags & SCF_DO_STCLASS_OR) cl_and(data->start_class, and_withp); flags &= ~SCF_DO_STCLASS; } } else if (PL_regkind[OP(scan)] == EOL && flags & SCF_DO_SUBSTR) { data->flags |= (OP(scan) == MEOL ? SF_BEFORE_MEOL : SF_BEFORE_SEOL); SCAN_COMMIT(pRExC_state, data, minlenp); } else if ( PL_regkind[OP(scan)] == BRANCHJ /* Lookbehind, or need to calculate parens/evals/stclass: */ && (scan->flags || data || (flags & SCF_DO_STCLASS)) && (OP(scan) == IFMATCH || OP(scan) == UNLESSM)) { if ( OP(scan) == UNLESSM && scan->flags == 0 && OP(NEXTOPER(NEXTOPER(scan))) == NOTHING && OP(regnext(NEXTOPER(NEXTOPER(scan)))) == SUCCEED ) { regnode *opt; regnode *upto= regnext(scan); DEBUG_PARSE_r({ SV * const mysv_val=sv_newmortal(); DEBUG_STUDYDATA("OPFAIL",data,depth); /*DEBUG_PARSE_MSG("opfail");*/ regprop(RExC_rx, mysv_val, upto); PerlIO_printf(Perl_debug_log, "~ replace with OPFAIL pointed at %s (%"IVdf") offset %"IVdf"\n", SvPV_nolen_const(mysv_val), (IV)REG_NODE_NUM(upto), (IV)(upto - scan) ); }); OP(scan) = OPFAIL; NEXT_OFF(scan) = upto - scan; for (opt= scan + 1; opt < upto ; opt++) OP(opt) = OPTIMIZED; scan= upto; continue; } if ( !PERL_ENABLE_POSITIVE_ASSERTION_STUDY || OP(scan) == UNLESSM ) { /* Negative Lookahead/lookbehind In this case we can't do fixed string optimisation. */ I32 deltanext, minnext, fake = 0; regnode *nscan; struct regnode_charclass_class intrnl; int f = 0; data_fake.flags = 0; if (data) { data_fake.whilem_c = data->whilem_c; data_fake.last_closep = data->last_closep; } else data_fake.last_closep = &fake; data_fake.pos_delta = delta; if ( flags & SCF_DO_STCLASS && !scan->flags && OP(scan) == IFMATCH ) { /* Lookahead */ cl_init(pRExC_state, &intrnl); data_fake.start_class = &intrnl; f |= SCF_DO_STCLASS_AND; } if (flags & SCF_WHILEM_VISITED_POS) f |= SCF_WHILEM_VISITED_POS; next = regnext(scan); nscan = NEXTOPER(NEXTOPER(scan)); minnext = study_chunk(pRExC_state, &nscan, minlenp, &deltanext, last, &data_fake, stopparen, recursed, NULL, f, depth+1); if (scan->flags) { if (deltanext) { FAIL("Variable length lookbehind not implemented"); } else if (minnext > (I32)U8_MAX) { FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX); } scan->flags = (U8)minnext; } if (data) { if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR)) pars++; if (data_fake.flags & SF_HAS_EVAL) data->flags |= SF_HAS_EVAL; data->whilem_c = data_fake.whilem_c; } if (f & SCF_DO_STCLASS_AND) { if (flags & SCF_DO_STCLASS_OR) { /* OR before, AND after: ideally we would recurse with * data_fake to get the AND applied by study of the * remainder of the pattern, and then derecurse; * *** HACK *** for now just treat as "no information". * See [perl #56690]. */ cl_init(pRExC_state, data->start_class); } else { /* AND before and after: combine and continue */ const int was = (data->start_class->flags & ANYOF_EOS); cl_and(data->start_class, &intrnl); if (was) data->start_class->flags |= ANYOF_EOS; } } } #if PERL_ENABLE_POSITIVE_ASSERTION_STUDY else { /* Positive Lookahead/lookbehind In this case we can do fixed string optimisation, but we must be careful about it. Note in the case of lookbehind the positions will be offset by the minimum length of the pattern, something we won't know about until after the recurse. */ I32 deltanext, fake = 0; regnode *nscan; struct regnode_charclass_class intrnl; int f = 0; /* We use SAVEFREEPV so that when the full compile is finished perl will clean up the allocated minlens when it's all done. This way we don't have to worry about freeing them when we know they wont be used, which would be a pain. */ I32 *minnextp; Newx( minnextp, 1, I32 ); SAVEFREEPV(minnextp); if (data) { StructCopy(data, &data_fake, scan_data_t); if ((flags & SCF_DO_SUBSTR) && data->last_found) { f |= SCF_DO_SUBSTR; if (scan->flags) SCAN_COMMIT(pRExC_state, &data_fake,minlenp); data_fake.last_found=newSVsv(data->last_found); } } else data_fake.last_closep = &fake; data_fake.flags = 0; data_fake.pos_delta = delta; if (is_inf) data_fake.flags |= SF_IS_INF; if ( flags & SCF_DO_STCLASS && !scan->flags && OP(scan) == IFMATCH ) { /* Lookahead */ cl_init(pRExC_state, &intrnl); data_fake.start_class = &intrnl; f |= SCF_DO_STCLASS_AND; } if (flags & SCF_WHILEM_VISITED_POS) f |= SCF_WHILEM_VISITED_POS; next = regnext(scan); nscan = NEXTOPER(NEXTOPER(scan)); *minnextp = study_chunk(pRExC_state, &nscan, minnextp, &deltanext, last, &data_fake, stopparen, recursed, NULL, f,depth+1); if (scan->flags) { if (deltanext) { FAIL("Variable length lookbehind not implemented"); } else if (*minnextp > (I32)U8_MAX) { FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX); } scan->flags = (U8)*minnextp; } *minnextp += min; if (f & SCF_DO_STCLASS_AND) { const int was = (data->start_class->flags & ANYOF_EOS); cl_and(data->start_class, &intrnl); if (was) data->start_class->flags |= ANYOF_EOS; } if (data) { if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR)) pars++; if (data_fake.flags & SF_HAS_EVAL) data->flags |= SF_HAS_EVAL; data->whilem_c = data_fake.whilem_c; if ((flags & SCF_DO_SUBSTR) && data_fake.last_found) { if (RExC_rx->minlen<*minnextp) RExC_rx->minlen=*minnextp; SCAN_COMMIT(pRExC_state, &data_fake, minnextp); SvREFCNT_dec(data_fake.last_found); if ( data_fake.minlen_fixed != minlenp ) { data->offset_fixed= data_fake.offset_fixed; data->minlen_fixed= data_fake.minlen_fixed; data->lookbehind_fixed+= scan->flags; } if ( data_fake.minlen_float != minlenp ) { data->minlen_float= data_fake.minlen_float; data->offset_float_min=data_fake.offset_float_min; data->offset_float_max=data_fake.offset_float_max; data->lookbehind_float+= scan->flags; } } } } #endif } else if (OP(scan) == OPEN) { if (stopparen != (I32)ARG(scan)) pars++; } else if (OP(scan) == CLOSE) { if (stopparen == (I32)ARG(scan)) { break; } if ((I32)ARG(scan) == is_par) { next = regnext(scan); if ( next && (OP(next) != WHILEM) && next < last) is_par = 0; /* Disable optimization */ } if (data) *(data->last_closep) = ARG(scan); } else if (OP(scan) == EVAL) { if (data) data->flags |= SF_HAS_EVAL; } else if ( PL_regkind[OP(scan)] == ENDLIKE ) { if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); flags &= ~SCF_DO_SUBSTR; } if (data && OP(scan)==ACCEPT) { data->flags |= SCF_SEEN_ACCEPT; if (stopmin > min) stopmin = min; } } else if (OP(scan) == LOGICAL && scan->flags == 2) /* Embedded follows */ { if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); data->longest = &(data->longest_float); } is_inf = is_inf_internal = 1; if (flags & SCF_DO_STCLASS_OR) /* Allow everything */ cl_anything(pRExC_state, data->start_class); flags &= ~SCF_DO_STCLASS; } else if (OP(scan) == GPOS) { if (!(RExC_rx->extflags & RXf_GPOS_FLOAT) && !(delta || is_inf || (data && data->pos_delta))) { if (!(RExC_rx->extflags & RXf_ANCH) && (flags & SCF_DO_SUBSTR)) RExC_rx->extflags |= RXf_ANCH_GPOS; if (RExC_rx->gofs < (U32)min) RExC_rx->gofs = min; } else { RExC_rx->extflags |= RXf_GPOS_FLOAT; RExC_rx->gofs = 0; } } #ifdef TRIE_STUDY_OPT #ifdef FULL_TRIE_STUDY else if (PL_regkind[OP(scan)] == TRIE) { /* NOTE - There is similar code to this block above for handling BRANCH nodes on the initial study. If you change stuff here check there too. */ regnode *trie_node= scan; regnode *tail= regnext(scan); reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ]; I32 max1 = 0, min1 = I32_MAX; struct regnode_charclass_class accum; if (flags & SCF_DO_SUBSTR) /* XXXX Add !SUSPEND? */ SCAN_COMMIT(pRExC_state, data,minlenp); /* Cannot merge strings after this. */ if (flags & SCF_DO_STCLASS) cl_init_zero(pRExC_state, &accum); if (!trie->jump) { min1= trie->minlen; max1= trie->maxlen; } else { const regnode *nextbranch= NULL; U32 word; for ( word=1 ; word <= trie->wordcount ; word++) { I32 deltanext=0, minnext=0, f = 0, fake; struct regnode_charclass_class this_class; data_fake.flags = 0; if (data) { data_fake.whilem_c = data->whilem_c; data_fake.last_closep = data->last_closep; } else data_fake.last_closep = &fake; data_fake.pos_delta = delta; if (flags & SCF_DO_STCLASS) { cl_init(pRExC_state, &this_class); data_fake.start_class = &this_class; f = SCF_DO_STCLASS_AND; } if (flags & SCF_WHILEM_VISITED_POS) f |= SCF_WHILEM_VISITED_POS; if (trie->jump[word]) { if (!nextbranch) nextbranch = trie_node + trie->jump[0]; scan= trie_node + trie->jump[word]; /* We go from the jump point to the branch that follows it. Note this means we need the vestigal unused branches even though they arent otherwise used. */ minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext, (regnode *)nextbranch, &data_fake, stopparen, recursed, NULL, f,depth+1); } if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH) nextbranch= regnext((regnode*)nextbranch); if (min1 > (I32)(minnext + trie->minlen)) min1 = minnext + trie->minlen; if (max1 < (I32)(minnext + deltanext + trie->maxlen)) max1 = minnext + deltanext + trie->maxlen; if (deltanext == I32_MAX) is_inf = is_inf_internal = 1; if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR)) pars++; if (data_fake.flags & SCF_SEEN_ACCEPT) { if ( stopmin > min + min1) stopmin = min + min1; flags &= ~SCF_DO_SUBSTR; if (data) data->flags |= SCF_SEEN_ACCEPT; } if (data) { if (data_fake.flags & SF_HAS_EVAL) data->flags |= SF_HAS_EVAL; data->whilem_c = data_fake.whilem_c; } if (flags & SCF_DO_STCLASS) cl_or(pRExC_state, &accum, &this_class); } } if (flags & SCF_DO_SUBSTR) { data->pos_min += min1; data->pos_delta += max1 - min1; if (max1 != min1 || is_inf) data->longest = &(data->longest_float); } min += min1; delta += max1 - min1; if (flags & SCF_DO_STCLASS_OR) { cl_or(pRExC_state, data->start_class, &accum); if (min1) { cl_and(data->start_class, and_withp); flags &= ~SCF_DO_STCLASS; } } else if (flags & SCF_DO_STCLASS_AND) { if (min1) { cl_and(data->start_class, &accum); flags &= ~SCF_DO_STCLASS; } else { /* Switch to OR mode: cache the old value of * data->start_class */ INIT_AND_WITHP; StructCopy(data->start_class, and_withp, struct regnode_charclass_class); flags &= ~SCF_DO_STCLASS_AND; StructCopy(&accum, data->start_class, struct regnode_charclass_class); flags |= SCF_DO_STCLASS_OR; data->start_class->flags |= ANYOF_EOS; } } scan= tail; continue; } #else else if (PL_regkind[OP(scan)] == TRIE) { reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ]; U8*bang=NULL; min += trie->minlen; delta += (trie->maxlen - trie->minlen); flags &= ~SCF_DO_STCLASS; /* xxx */ if (flags & SCF_DO_SUBSTR) { SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */ data->pos_min += trie->minlen; data->pos_delta += (trie->maxlen - trie->minlen); if (trie->maxlen != trie->minlen) data->longest = &(data->longest_float); } if (trie->jump) /* no more substrings -- for now /grr*/ flags &= ~SCF_DO_SUBSTR; } #endif /* old or new */ #endif /* TRIE_STUDY_OPT */ /* Else: zero-length, ignore. */ scan = regnext(scan); } if (frame) { last = frame->last; scan = frame->next; stopparen = frame->stop; frame = frame->prev; goto fake_study_recurse; } finish: assert(!frame); DEBUG_STUDYDATA("pre-fin:",data,depth); *scanp = scan; *deltap = is_inf_internal ? I32_MAX : delta; if (flags & SCF_DO_SUBSTR && is_inf) data->pos_delta = I32_MAX - data->pos_min; if (is_par > (I32)U8_MAX) is_par = 0; if (is_par && pars==1 && data) { data->flags |= SF_IN_PAR; data->flags &= ~SF_HAS_PAR; } else if (pars && data) { data->flags |= SF_HAS_PAR; data->flags &= ~SF_IN_PAR; } if (flags & SCF_DO_STCLASS_OR) cl_and(data->start_class, and_withp); if (flags & SCF_TRIE_RESTUDY) data->flags |= SCF_TRIE_RESTUDY; DEBUG_STUDYDATA("post-fin:",data,depth); return min < stopmin ? min : stopmin; } STATIC U32 S_add_data(RExC_state_t *pRExC_state, U32 n, const char *s) { U32 count = RExC_rxi->data ? RExC_rxi->data->count : 0; PERL_ARGS_ASSERT_ADD_DATA; Renewc(RExC_rxi->data, sizeof(*RExC_rxi->data) + sizeof(void*) * (count + n - 1), char, struct reg_data); if(count) Renew(RExC_rxi->data->what, count + n, U8); else Newx(RExC_rxi->data->what, n, U8); RExC_rxi->data->count = count + n; Copy(s, RExC_rxi->data->what + count, n, U8); return count; } /*XXX: todo make this not included in a non debugging perl */ #ifndef PERL_IN_XSUB_RE void Perl_reginitcolors(pTHX) { dVAR; const char * const s = PerlEnv_getenv("PERL_RE_COLORS"); if (s) { char *t = savepv(s); int i = 0; PL_colors[0] = t; while (++i < 6) { t = strchr(t, '\t'); if (t) { *t = '\0'; PL_colors[i] = ++t; } else PL_colors[i] = t = (char *)""; } } else { int i = 0; while (i < 6) PL_colors[i++] = (char *)""; } PL_colorset = 1; } #endif #ifdef TRIE_STUDY_OPT #define CHECK_RESTUDY_GOTO \ if ( \ (data.flags & SCF_TRIE_RESTUDY) \ && ! restudied++ \ ) goto reStudy #else #define CHECK_RESTUDY_GOTO #endif /* * pregcomp - compile a regular expression into internal code * * Decides which engine's compiler to call based on the hint currently in * scope */ #ifndef PERL_IN_XSUB_RE /* return the currently in-scope regex engine (or the default if none) */ regexp_engine const * Perl_current_re_engine(pTHX) { dVAR; if (IN_PERL_COMPILETIME) { HV * const table = GvHV(PL_hintgv); SV **ptr; if (!table) return &PL_core_reg_engine; ptr = hv_fetchs(table, "regcomp", FALSE); if ( !(ptr && SvIOK(*ptr) && SvIV(*ptr))) return &PL_core_reg_engine; return INT2PTR(regexp_engine*,SvIV(*ptr)); } else { SV *ptr; if (!PL_curcop->cop_hints_hash) return &PL_core_reg_engine; ptr = cop_hints_fetch_pvs(PL_curcop, "regcomp", 0); if ( !(ptr && SvIOK(ptr) && SvIV(ptr))) return &PL_core_reg_engine; return INT2PTR(regexp_engine*,SvIV(ptr)); } } REGEXP * Perl_pregcomp(pTHX_ SV * const pattern, const U32 flags) { dVAR; regexp_engine const *eng = current_re_engine(); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_PREGCOMP; /* Dispatch a request to compile a regexp to correct regexp engine. */ DEBUG_COMPILE_r({ PerlIO_printf(Perl_debug_log, "Using engine %"UVxf"\n", PTR2UV(eng)); }); return CALLREGCOMP_ENG(eng, pattern, flags); } #endif /* public(ish) entry point for the perl core's own regex compiling code. * It's actually a wrapper for Perl_re_op_compile that only takes an SV * pattern rather than a list of OPs, and uses the internal engine rather * than the current one */ REGEXP * Perl_re_compile(pTHX_ SV * const pattern, U32 rx_flags) { SV *pat = pattern; /* defeat constness! */ PERL_ARGS_ASSERT_RE_COMPILE; return Perl_re_op_compile(aTHX_ &pat, 1, NULL, #ifdef PERL_IN_XSUB_RE &my_reg_engine, #else &PL_core_reg_engine, #endif NULL, NULL, rx_flags, 0); } /* see if there are any run-time code blocks in the pattern. * False positives are allowed */ static bool S_has_runtime_code(pTHX_ RExC_state_t * const pRExC_state, OP *expr, U32 pm_flags, char *pat, STRLEN plen) { int n = 0; STRLEN s; /* avoid infinitely recursing when we recompile the pattern parcelled up * as qr'...'. A single constant qr// string can't have have any * run-time component in it, and thus, no runtime code. (A non-qr * string, however, can, e.g. $x =~ '(?{})') */ if ((pm_flags & PMf_IS_QR) && expr && expr->op_type == OP_CONST) return 0; for (s = 0; s < plen; s++) { if (n < pRExC_state->num_code_blocks && s == pRExC_state->code_blocks[n].start) { s = pRExC_state->code_blocks[n].end; n++; continue; } /* TODO ideally should handle [..], (#..), /#.../x to reduce false * positives here */ if (pat[s] == '(' && pat[s+1] == '?' && (pat[s+2] == '{' || (pat[s+2] == '?' && pat[s+3] == '{')) ) return 1; } return 0; } /* Handle run-time code blocks. We will already have compiled any direct * or indirect literal code blocks. Now, take the pattern 'pat' and make a * copy of it, but with any literal code blocks blanked out and * appropriate chars escaped; then feed it into * * eval "qr'modified_pattern'" * * For example, * * a\bc(?{"this was literal"})def'ghi\\jkl(?{"this is runtime"})mno * * becomes * * qr'a\\bc def\'ghi\\\\jkl(?{"this is runtime"})mno' * * After eval_sv()-ing that, grab any new code blocks from the returned qr * and merge them with any code blocks of the original regexp. * * If the pat is non-UTF8, while the evalled qr is UTF8, don't merge; * instead, just save the qr and return FALSE; this tells our caller that * the original pattern needs upgrading to utf8. */ static bool S_compile_runtime_code(pTHX_ RExC_state_t * const pRExC_state, char *pat, STRLEN plen) { SV *qr; GET_RE_DEBUG_FLAGS_DECL; if (pRExC_state->runtime_code_qr) { /* this is the second time we've been called; this should * only happen if the main pattern got upgraded to utf8 * during compilation; re-use the qr we compiled first time * round (which should be utf8 too) */ qr = pRExC_state->runtime_code_qr; pRExC_state->runtime_code_qr = NULL; assert(RExC_utf8 && SvUTF8(qr)); } else { int n = 0; STRLEN s; char *p, *newpat; int newlen = plen + 6; /* allow for "qr''x\0" extra chars */ SV *sv, *qr_ref; dSP; /* determine how many extra chars we need for ' and \ escaping */ for (s = 0; s < plen; s++) { if (pat[s] == '\'' || pat[s] == '\\') newlen++; } Newx(newpat, newlen, char); p = newpat; *p++ = 'q'; *p++ = 'r'; *p++ = '\''; for (s = 0; s < plen; s++) { if (n < pRExC_state->num_code_blocks && s == pRExC_state->code_blocks[n].start) { /* blank out literal code block */ assert(pat[s] == '('); while (s <= pRExC_state->code_blocks[n].end) { *p++ = ' '; s++; } s--; n++; continue; } if (pat[s] == '\'' || pat[s] == '\\') *p++ = '\\'; *p++ = pat[s]; } *p++ = '\''; if (pRExC_state->pm_flags & RXf_PMf_EXTENDED) *p++ = 'x'; *p++ = '\0'; DEBUG_COMPILE_r({ PerlIO_printf(Perl_debug_log, "%sre-parsing pattern for runtime code:%s %s\n", PL_colors[4],PL_colors[5],newpat); }); sv = newSVpvn_flags(newpat, p-newpat-1, RExC_utf8 ? SVf_UTF8 : 0); Safefree(newpat); ENTER; SAVETMPS; save_re_context(); PUSHSTACKi(PERLSI_REQUIRE); /* this causes the toker to collapse \\ into \ when parsing * qr''; normally only q'' does this. It also alters hints * handling */ PL_reg_state.re_reparsing = TRUE; eval_sv(sv, G_SCALAR); SvREFCNT_dec(sv); SPAGAIN; qr_ref = POPs; PUTBACK; if (SvTRUE(ERRSV)) Perl_croak(aTHX_ "%s", SvPVx_nolen_const(ERRSV)); assert(SvROK(qr_ref)); qr = SvRV(qr_ref); assert(SvTYPE(qr) == SVt_REGEXP && RX_ENGINE((REGEXP*)qr)->op_comp); /* the leaving below frees the tmp qr_ref. * Give qr a life of its own */ SvREFCNT_inc(qr); POPSTACK; FREETMPS; LEAVE; } if (!RExC_utf8 && SvUTF8(qr)) { /* first time through; the pattern got upgraded; save the * qr for the next time through */ assert(!pRExC_state->runtime_code_qr); pRExC_state->runtime_code_qr = qr; return 0; } /* extract any code blocks within the returned qr// */ /* merge the main (r1) and run-time (r2) code blocks into one */ { RXi_GET_DECL(((struct regexp*)SvANY(qr)), r2); struct reg_code_block *new_block, *dst; RExC_state_t * const r1 = pRExC_state; /* convenient alias */ int i1 = 0, i2 = 0; if (!r2->num_code_blocks) /* we guessed wrong */ return 1; Newx(new_block, r1->num_code_blocks + r2->num_code_blocks, struct reg_code_block); dst = new_block; while ( i1 < r1->num_code_blocks || i2 < r2->num_code_blocks) { struct reg_code_block *src; bool is_qr = 0; if (i1 == r1->num_code_blocks) { src = &r2->code_blocks[i2++]; is_qr = 1; } else if (i2 == r2->num_code_blocks) src = &r1->code_blocks[i1++]; else if ( r1->code_blocks[i1].start < r2->code_blocks[i2].start) { src = &r1->code_blocks[i1++]; assert(src->end < r2->code_blocks[i2].start); } else { assert( r1->code_blocks[i1].start > r2->code_blocks[i2].start); src = &r2->code_blocks[i2++]; is_qr = 1; assert(src->end < r1->code_blocks[i1].start); } assert(pat[src->start] == '('); assert(pat[src->end] == ')'); dst->start = src->start; dst->end = src->end; dst->block = src->block; dst->src_regex = is_qr ? (REGEXP*) SvREFCNT_inc( (SV*) qr) : src->src_regex; dst++; } r1->num_code_blocks += r2->num_code_blocks; Safefree(r1->code_blocks); r1->code_blocks = new_block; } SvREFCNT_dec(qr); return 1; } STATIC bool S_setup_longest(pTHX_ RExC_state_t *pRExC_state, SV* sv_longest, SV** rx_utf8, SV** rx_substr, I32* rx_end_shift, I32 lookbehind, I32 offset, I32 *minlen, STRLEN longest_length, bool eol, bool meol) { /* This is the common code for setting up the floating and fixed length * string data extracted from Perlre_op_compile() below. Returns a boolean * as to whether succeeded or not */ I32 t,ml; if (! (longest_length || (eol /* Can't have SEOL and MULTI */ && (! meol || (RExC_flags & RXf_PMf_MULTILINE))) ) /* See comments for join_exact for why REG_SEEN_EXACTF_SHARP_S */ || (RExC_seen & REG_SEEN_EXACTF_SHARP_S)) { return FALSE; } /* copy the information about the longest from the reg_scan_data over to the program. */ if (SvUTF8(sv_longest)) { *rx_utf8 = sv_longest; *rx_substr = NULL; } else { *rx_substr = sv_longest; *rx_utf8 = NULL; } /* end_shift is how many chars that must be matched that follow this item. We calculate it ahead of time as once the lookbehind offset is added in we lose the ability to correctly calculate it.*/ ml = minlen ? *(minlen) : (I32)longest_length; *rx_end_shift = ml - offset - longest_length + (SvTAIL(sv_longest) != 0) + lookbehind; t = (eol/* Can't have SEOL and MULTI */ && (! meol || (RExC_flags & RXf_PMf_MULTILINE))); fbm_compile(sv_longest, t ? FBMcf_TAIL : 0); return TRUE; } /* * Perl_re_op_compile - the perl internal RE engine's function to compile a * regular expression into internal code. * The pattern may be passed either as: * a list of SVs (patternp plus pat_count) * a list of OPs (expr) * If both are passed, the SV list is used, but the OP list indicates * which SVs are actually pre-compiled code blocks * * The SVs in the list have magic and qr overloading applied to them (and * the list may be modified in-place with replacement SVs in the latter * case). * * If the pattern hasn't changed from old_re, then old_re will be * returned. * * eng is the current engine. If that engine has an op_comp method, then * handle directly (i.e. we assume that op_comp was us); otherwise, just * do the initial concatenation of arguments and pass on to the external * engine. * * If is_bare_re is not null, set it to a boolean indicating whether the * arg list reduced (after overloading) to a single bare regex which has * been returned (i.e. /$qr/). * * orig_rx_flags contains RXf_* flags. See perlreapi.pod for more details. * * pm_flags contains the PMf_* flags, typically based on those from the * pm_flags field of the related PMOP. Currently we're only interested in * PMf_HAS_CV, PMf_IS_QR, PMf_USE_RE_EVAL. * * We can't allocate space until we know how big the compiled form will be, * but we can't compile it (and thus know how big it is) until we've got a * place to put the code. So we cheat: we compile it twice, once with code * generation turned off and size counting turned on, and once "for real". * This also means that we don't allocate space until we are sure that the * thing really will compile successfully, and we never have to move the * code and thus invalidate pointers into it. (Note that it has to be in * one piece because free() must be able to free it all.) [NB: not true in perl] * * Beware that the optimization-preparation code in here knows about some * of the structure of the compiled regexp. [I'll say.] */ REGEXP * Perl_re_op_compile(pTHX_ SV ** const patternp, int pat_count, OP *expr, const regexp_engine* eng, REGEXP *VOL old_re, bool *is_bare_re, U32 orig_rx_flags, U32 pm_flags) { dVAR; REGEXP *rx; struct regexp *r; regexp_internal *ri; STRLEN plen; char * VOL exp; char* xend; regnode *scan; I32 flags; I32 minlen = 0; U32 rx_flags; SV * VOL pat; /* these are all flags - maybe they should be turned * into a single int with different bit masks */ I32 sawlookahead = 0; I32 sawplus = 0; I32 sawopen = 0; bool used_setjump = FALSE; regex_charset initial_charset = get_regex_charset(orig_rx_flags); bool code_is_utf8 = 0; bool VOL recompile = 0; bool runtime_code = 0; U8 jump_ret = 0; dJMPENV; scan_data_t data; RExC_state_t RExC_state; RExC_state_t * const pRExC_state = &RExC_state; #ifdef TRIE_STUDY_OPT int restudied; RExC_state_t copyRExC_state; #endif GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_RE_OP_COMPILE; DEBUG_r(if (!PL_colorset) reginitcolors()); #ifndef PERL_IN_XSUB_RE /* Initialize these here instead of as-needed, as is quick and avoids * having to test them each time otherwise */ if (! PL_AboveLatin1) { PL_AboveLatin1 = _new_invlist_C_array(AboveLatin1_invlist); PL_ASCII = _new_invlist_C_array(ASCII_invlist); PL_Latin1 = _new_invlist_C_array(Latin1_invlist); PL_L1PosixAlnum = _new_invlist_C_array(L1PosixAlnum_invlist); PL_PosixAlnum = _new_invlist_C_array(PosixAlnum_invlist); PL_L1PosixAlpha = _new_invlist_C_array(L1PosixAlpha_invlist); PL_PosixAlpha = _new_invlist_C_array(PosixAlpha_invlist); PL_PosixBlank = _new_invlist_C_array(PosixBlank_invlist); PL_XPosixBlank = _new_invlist_C_array(XPosixBlank_invlist); PL_L1Cased = _new_invlist_C_array(L1Cased_invlist); PL_PosixCntrl = _new_invlist_C_array(PosixCntrl_invlist); PL_XPosixCntrl = _new_invlist_C_array(XPosixCntrl_invlist); PL_PosixDigit = _new_invlist_C_array(PosixDigit_invlist); PL_L1PosixGraph = _new_invlist_C_array(L1PosixGraph_invlist); PL_PosixGraph = _new_invlist_C_array(PosixGraph_invlist); PL_L1PosixLower = _new_invlist_C_array(L1PosixLower_invlist); PL_PosixLower = _new_invlist_C_array(PosixLower_invlist); PL_L1PosixPrint = _new_invlist_C_array(L1PosixPrint_invlist); PL_PosixPrint = _new_invlist_C_array(PosixPrint_invlist); PL_L1PosixPunct = _new_invlist_C_array(L1PosixPunct_invlist); PL_PosixPunct = _new_invlist_C_array(PosixPunct_invlist); PL_PerlSpace = _new_invlist_C_array(PerlSpace_invlist); PL_XPerlSpace = _new_invlist_C_array(XPerlSpace_invlist); PL_PosixSpace = _new_invlist_C_array(PosixSpace_invlist); PL_XPosixSpace = _new_invlist_C_array(XPosixSpace_invlist); PL_L1PosixUpper = _new_invlist_C_array(L1PosixUpper_invlist); PL_PosixUpper = _new_invlist_C_array(PosixUpper_invlist); PL_VertSpace = _new_invlist_C_array(VertSpace_invlist); PL_PosixWord = _new_invlist_C_array(PosixWord_invlist); PL_L1PosixWord = _new_invlist_C_array(L1PosixWord_invlist); PL_PosixXDigit = _new_invlist_C_array(PosixXDigit_invlist); PL_XPosixXDigit = _new_invlist_C_array(XPosixXDigit_invlist); PL_HasMultiCharFold = _new_invlist_C_array(_Perl_Multi_Char_Folds_invlist); } #endif pRExC_state->code_blocks = NULL; pRExC_state->num_code_blocks = 0; if (is_bare_re) *is_bare_re = FALSE; if (expr && (expr->op_type == OP_LIST || (expr->op_type == OP_NULL && expr->op_targ == OP_LIST))) { /* is the source UTF8, and how many code blocks are there? */ OP *o; int ncode = 0; for (o = cLISTOPx(expr)->op_first; o; o = o->op_sibling) { if (o->op_type == OP_CONST && SvUTF8(cSVOPo_sv)) code_is_utf8 = 1; else if (o->op_type == OP_NULL && (o->op_flags & OPf_SPECIAL)) /* count of DO blocks */ ncode++; } if (ncode) { pRExC_state->num_code_blocks = ncode; Newx(pRExC_state->code_blocks, ncode, struct reg_code_block); } } if (pat_count) { /* handle a list of SVs */ SV **svp; /* apply magic and RE overloading to each arg */ for (svp = patternp; svp < patternp + pat_count; svp++) { SV *rx = *svp; SvGETMAGIC(rx); if (SvROK(rx) && SvAMAGIC(rx)) { SV *sv = AMG_CALLunary(rx, regexp_amg); if (sv) { if (SvROK(sv)) sv = SvRV(sv); if (SvTYPE(sv) != SVt_REGEXP) Perl_croak(aTHX_ "Overloaded qr did not return a REGEXP"); *svp = sv; } } } if (pat_count > 1) { /* concat multiple args and find any code block indexes */ OP *o = NULL; int n = 0; bool utf8 = 0; STRLEN orig_patlen = 0; if (pRExC_state->num_code_blocks) { o = cLISTOPx(expr)->op_first; assert(o->op_type == OP_PUSHMARK); o = o->op_sibling; } pat = newSVpvn("", 0); SAVEFREESV(pat); /* determine if the pattern is going to be utf8 (needed * in advance to align code block indices correctly). * XXX This could fail to be detected for an arg with * overloading but not concat overloading; but the main effect * in this obscure case is to need a 'use re eval' for a * literal code block */ for (svp = patternp; svp < patternp + pat_count; svp++) { if (SvUTF8(*svp)) utf8 = 1; } if (utf8) SvUTF8_on(pat); for (svp = patternp; svp < patternp + pat_count; svp++) { SV *sv, *msv = *svp; SV *rx; bool code = 0; if (o) { if (o->op_type == OP_NULL && (o->op_flags & OPf_SPECIAL)) { assert(n < pRExC_state->num_code_blocks); pRExC_state->code_blocks[n].start = SvCUR(pat); pRExC_state->code_blocks[n].block = o; pRExC_state->code_blocks[n].src_regex = NULL; n++; code = 1; o = o->op_sibling; /* skip CONST */ assert(o); } o = o->op_sibling;; } if ((SvAMAGIC(pat) || SvAMAGIC(msv)) && (sv = amagic_call(pat, msv, concat_amg, AMGf_assign))) { sv_setsv(pat, sv); /* overloading involved: all bets are off over literal * code. Pretend we haven't seen it */ pRExC_state->num_code_blocks -= n; n = 0; rx = NULL; } else { while (SvAMAGIC(msv) && (sv = AMG_CALLunary(msv, string_amg)) && sv != msv && !( SvROK(msv) && SvROK(sv) && SvRV(msv) == SvRV(sv)) ) { msv = sv; SvGETMAGIC(msv); } if (SvROK(msv) && SvTYPE(SvRV(msv)) == SVt_REGEXP) msv = SvRV(msv); orig_patlen = SvCUR(pat); sv_catsv_nomg(pat, msv); rx = msv; if (code) pRExC_state->code_blocks[n-1].end = SvCUR(pat)-1; } /* extract any code blocks within any embedded qr//'s */ if (rx && SvTYPE(rx) == SVt_REGEXP && RX_ENGINE((REGEXP*)rx)->op_comp) { RXi_GET_DECL(((struct regexp*)SvANY(rx)), ri); if (ri->num_code_blocks) { int i; /* the presence of an embedded qr// with code means * we should always recompile: the text of the * qr// may not have changed, but it may be a * different closure than last time */ recompile = 1; Renew(pRExC_state->code_blocks, pRExC_state->num_code_blocks + ri->num_code_blocks, struct reg_code_block); pRExC_state->num_code_blocks += ri->num_code_blocks; for (i=0; i < ri->num_code_blocks; i++) { struct reg_code_block *src, *dst; STRLEN offset = orig_patlen + ((struct regexp *)SvANY(rx))->pre_prefix; assert(n < pRExC_state->num_code_blocks); src = &ri->code_blocks[i]; dst = &pRExC_state->code_blocks[n]; dst->start = src->start + offset; dst->end = src->end + offset; dst->block = src->block; dst->src_regex = (REGEXP*) SvREFCNT_inc( (SV*) src->src_regex ? src->src_regex : (REGEXP*)rx); n++; } } } } SvSETMAGIC(pat); } else { SV *sv; pat = *patternp; while (SvAMAGIC(pat) && (sv = AMG_CALLunary(pat, string_amg)) && sv != pat) { pat = sv; SvGETMAGIC(pat); } } /* handle bare regex: foo =~ $re */ { SV *re = pat; if (SvROK(re)) re = SvRV(re); if (SvTYPE(re) == SVt_REGEXP) { if (is_bare_re) *is_bare_re = TRUE; SvREFCNT_inc(re); Safefree(pRExC_state->code_blocks); return (REGEXP*)re; } } } else { /* not a list of SVs, so must be a list of OPs */ assert(expr); if (expr->op_type == OP_LIST) { int i = -1; bool is_code = 0; OP *o; pat = newSVpvn("", 0); SAVEFREESV(pat); if (code_is_utf8) SvUTF8_on(pat); /* given a list of CONSTs and DO blocks in expr, append all * the CONSTs to pat, and record the start and end of each * code block in code_blocks[] (each DO{} op is followed by an * OP_CONST containing the corresponding literal '(?{...}) * text) */ for (o = cLISTOPx(expr)->op_first; o; o = o->op_sibling) { if (o->op_type == OP_CONST) { sv_catsv(pat, cSVOPo_sv); if (is_code) { pRExC_state->code_blocks[i].end = SvCUR(pat)-1; is_code = 0; } } else if (o->op_type == OP_NULL && (o->op_flags & OPf_SPECIAL)) { assert(i+1 < pRExC_state->num_code_blocks); pRExC_state->code_blocks[++i].start = SvCUR(pat); pRExC_state->code_blocks[i].block = o; pRExC_state->code_blocks[i].src_regex = NULL; is_code = 1; } } } else { assert(expr->op_type == OP_CONST); pat = cSVOPx_sv(expr); } } exp = SvPV_nomg(pat, plen); if (!eng->op_comp) { if ((SvUTF8(pat) && IN_BYTES) || SvGMAGICAL(pat) || SvAMAGIC(pat)) { /* make a temporary copy; either to convert to bytes, * or to avoid repeating get-magic / overloaded stringify */ pat = newSVpvn_flags(exp, plen, SVs_TEMP | (IN_BYTES ? 0 : SvUTF8(pat))); } Safefree(pRExC_state->code_blocks); return CALLREGCOMP_ENG(eng, pat, orig_rx_flags); } /* ignore the utf8ness if the pattern is 0 length */ RExC_utf8 = RExC_orig_utf8 = (plen == 0 || IN_BYTES) ? 0 : SvUTF8(pat); RExC_uni_semantics = 0; RExC_contains_locale = 0; pRExC_state->runtime_code_qr = NULL; /****************** LONG JUMP TARGET HERE***********************/ /* Longjmp back to here if have to switch in midstream to utf8 */ if (! RExC_orig_utf8) { JMPENV_PUSH(jump_ret); used_setjump = TRUE; } if (jump_ret == 0) { /* First time through */ xend = exp + plen; DEBUG_COMPILE_r({ SV *dsv= sv_newmortal(); RE_PV_QUOTED_DECL(s, RExC_utf8, dsv, exp, plen, 60); PerlIO_printf(Perl_debug_log, "%sCompiling REx%s %s\n", PL_colors[4],PL_colors[5],s); }); } else { /* longjumped back */ U8 *src, *dst; int n=0; STRLEN s = 0, d = 0; bool do_end = 0; /* If the cause for the longjmp was other than changing to utf8, pop * our own setjmp, and longjmp to the correct handler */ if (jump_ret != UTF8_LONGJMP) { JMPENV_POP; JMPENV_JUMP(jump_ret); } GET_RE_DEBUG_FLAGS; /* It's possible to write a regexp in ascii that represents Unicode codepoints outside of the byte range, such as via \x{100}. If we detect such a sequence we have to convert the entire pattern to utf8 and then recompile, as our sizing calculation will have been based on 1 byte == 1 character, but we will need to use utf8 to encode at least some part of the pattern, and therefore must convert the whole thing. -- dmq */ DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "UTF8 mismatch! Converting to utf8 for resizing and compile\n")); /* upgrade pattern to UTF8, and if there are code blocks, * recalculate the indices. * This is essentially an unrolled Perl_bytes_to_utf8() */ src = (U8*)SvPV_nomg(pat, plen); Newx(dst, plen * 2 + 1, U8); while (s < plen) { const UV uv = NATIVE_TO_ASCII(src[s]); if (UNI_IS_INVARIANT(uv)) dst[d] = (U8)UTF_TO_NATIVE(uv); else { dst[d++] = (U8)UTF8_EIGHT_BIT_HI(uv); dst[d] = (U8)UTF8_EIGHT_BIT_LO(uv); } if (n < pRExC_state->num_code_blocks) { if (!do_end && pRExC_state->code_blocks[n].start == s) { pRExC_state->code_blocks[n].start = d; assert(dst[d] == '('); do_end = 1; } else if (do_end && pRExC_state->code_blocks[n].end == s) { pRExC_state->code_blocks[n].end = d; assert(dst[d] == ')'); do_end = 0; n++; } } s++; d++; } dst[d] = '\0'; plen = d; exp = (char*) dst; xend = exp + plen; SAVEFREEPV(exp); RExC_orig_utf8 = RExC_utf8 = 1; } /* return old regex if pattern hasn't changed */ if ( old_re && !recompile && !!RX_UTF8(old_re) == !!RExC_utf8 && RX_PRECOMP(old_re) && RX_PRELEN(old_re) == plen && memEQ(RX_PRECOMP(old_re), exp, plen)) { /* with runtime code, always recompile */ runtime_code = S_has_runtime_code(aTHX_ pRExC_state, expr, pm_flags, exp, plen); if (!runtime_code) { if (used_setjump) { JMPENV_POP; } Safefree(pRExC_state->code_blocks); return old_re; } } else if ((pm_flags & PMf_USE_RE_EVAL) /* this second condition covers the non-regex literal case, * i.e. $foo =~ '(?{})'. */ || ( !PL_reg_state.re_reparsing && IN_PERL_COMPILETIME && (PL_hints & HINT_RE_EVAL)) ) runtime_code = S_has_runtime_code(aTHX_ pRExC_state, expr, pm_flags, exp, plen); #ifdef TRIE_STUDY_OPT restudied = 0; #endif rx_flags = orig_rx_flags; if (initial_charset == REGEX_LOCALE_CHARSET) { RExC_contains_locale = 1; } else if (RExC_utf8 && initial_charset == REGEX_DEPENDS_CHARSET) { /* Set to use unicode semantics if the pattern is in utf8 and has the * 'depends' charset specified, as it means unicode when utf8 */ set_regex_charset(&rx_flags, REGEX_UNICODE_CHARSET); } RExC_precomp = exp; RExC_flags = rx_flags; RExC_pm_flags = pm_flags; if (runtime_code) { if (PL_tainting && PL_tainted) Perl_croak(aTHX_ "Eval-group in insecure regular expression"); if (!S_compile_runtime_code(aTHX_ pRExC_state, exp, plen)) { /* whoops, we have a non-utf8 pattern, whilst run-time code * got compiled as utf8. Try again with a utf8 pattern */ JMPENV_JUMP(UTF8_LONGJMP); } } assert(!pRExC_state->runtime_code_qr); RExC_sawback = 0; RExC_seen = 0; RExC_in_lookbehind = 0; RExC_seen_zerolen = *exp == '^' ? -1 : 0; RExC_extralen = 0; RExC_override_recoding = 0; RExC_in_multi_char_class = 0; /* First pass: determine size, legality. */ RExC_parse = exp; RExC_start = exp; RExC_end = xend; RExC_naughty = 0; RExC_npar = 1; RExC_nestroot = 0; RExC_size = 0L; RExC_emit = &PL_regdummy; RExC_whilem_seen = 0; RExC_open_parens = NULL; RExC_close_parens = NULL; RExC_opend = NULL; RExC_paren_names = NULL; #ifdef DEBUGGING RExC_paren_name_list = NULL; #endif RExC_recurse = NULL; RExC_recurse_count = 0; pRExC_state->code_index = 0; #if 0 /* REGC() is (currently) a NOP at the first pass. * Clever compilers notice this and complain. --jhi */ REGC((U8)REG_MAGIC, (char*)RExC_emit); #endif DEBUG_PARSE_r( PerlIO_printf(Perl_debug_log, "Starting first pass (sizing)\n"); RExC_lastnum=0; RExC_lastparse=NULL; ); if (reg(pRExC_state, 0, &flags,1) == NULL) { RExC_precomp = NULL; Safefree(pRExC_state->code_blocks); return(NULL); } /* Here, finished first pass. Get rid of any added setjmp */ if (used_setjump) { JMPENV_POP; } DEBUG_PARSE_r({ PerlIO_printf(Perl_debug_log, "Required size %"IVdf" nodes\n" "Starting second pass (creation)\n", (IV)RExC_size); RExC_lastnum=0; RExC_lastparse=NULL; }); /* The first pass could have found things that force Unicode semantics */ if ((RExC_utf8 || RExC_uni_semantics) && get_regex_charset(rx_flags) == REGEX_DEPENDS_CHARSET) { set_regex_charset(&rx_flags, REGEX_UNICODE_CHARSET); } /* Small enough for pointer-storage convention? If extralen==0, this means that we will not need long jumps. */ if (RExC_size >= 0x10000L && RExC_extralen) RExC_size += RExC_extralen; else RExC_extralen = 0; if (RExC_whilem_seen > 15) RExC_whilem_seen = 15; /* Allocate space and zero-initialize. Note, the two step process of zeroing when in debug mode, thus anything assigned has to happen after that */ rx = (REGEXP*) newSV_type(SVt_REGEXP); r = (struct regexp*)SvANY(rx); Newxc(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode), char, regexp_internal); if ( r == NULL || ri == NULL ) FAIL("Regexp out of space"); #ifdef DEBUGGING /* avoid reading uninitialized memory in DEBUGGING code in study_chunk() */ Zero(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode), char); #else /* bulk initialize base fields with 0. */ Zero(ri, sizeof(regexp_internal), char); #endif /* non-zero initialization begins here */ RXi_SET( r, ri ); r->engine= eng; r->extflags = rx_flags; if (pm_flags & PMf_IS_QR) { ri->code_blocks = pRExC_state->code_blocks; ri->num_code_blocks = pRExC_state->num_code_blocks; } else SAVEFREEPV(pRExC_state->code_blocks); { bool has_p = ((r->extflags & RXf_PMf_KEEPCOPY) == RXf_PMf_KEEPCOPY); bool has_charset = (get_regex_charset(r->extflags) != REGEX_DEPENDS_CHARSET); /* The caret is output if there are any defaults: if not all the STD * flags are set, or if no character set specifier is needed */ bool has_default = (((r->extflags & RXf_PMf_STD_PMMOD) != RXf_PMf_STD_PMMOD) || ! has_charset); bool has_runon = ((RExC_seen & REG_SEEN_RUN_ON_COMMENT)==REG_SEEN_RUN_ON_COMMENT); U16 reganch = (U16)((r->extflags & RXf_PMf_STD_PMMOD) >> RXf_PMf_STD_PMMOD_SHIFT); const char *fptr = STD_PAT_MODS; /*"msix"*/ char *p; /* Allocate for the worst case, which is all the std flags are turned * on. If more precision is desired, we could do a population count of * the flags set. This could be done with a small lookup table, or by * shifting, masking and adding, or even, when available, assembly * language for a machine-language population count. * We never output a minus, as all those are defaults, so are * covered by the caret */ const STRLEN wraplen = plen + has_p + has_runon + has_default /* If needs a caret */ /* If needs a character set specifier */ + ((has_charset) ? MAX_CHARSET_NAME_LENGTH : 0) + (sizeof(STD_PAT_MODS) - 1) + (sizeof("(?:)") - 1); p = sv_grow(MUTABLE_SV(rx), wraplen + 1); /* +1 for the ending NUL */ SvPOK_on(rx); if (RExC_utf8) SvFLAGS(rx) |= SVf_UTF8; *p++='('; *p++='?'; /* If a default, cover it using the caret */ if (has_default) { *p++= DEFAULT_PAT_MOD; } if (has_charset) { STRLEN len; const char* const name = get_regex_charset_name(r->extflags, &len); Copy(name, p, len, char); p += len; } if (has_p) *p++ = KEEPCOPY_PAT_MOD; /*'p'*/ { char ch; while((ch = *fptr++)) { if(reganch & 1) *p++ = ch; reganch >>= 1; } } *p++ = ':'; Copy(RExC_precomp, p, plen, char); assert ((RX_WRAPPED(rx) - p) < 16); r->pre_prefix = p - RX_WRAPPED(rx); p += plen; if (has_runon) *p++ = '\n'; *p++ = ')'; *p = 0; SvCUR_set(rx, p - SvPVX_const(rx)); } r->intflags = 0; r->nparens = RExC_npar - 1; /* set early to validate backrefs */ if (RExC_seen & REG_SEEN_RECURSE) { Newxz(RExC_open_parens, RExC_npar,regnode *); SAVEFREEPV(RExC_open_parens); Newxz(RExC_close_parens,RExC_npar,regnode *); SAVEFREEPV(RExC_close_parens); } /* Useful during FAIL. */ #ifdef RE_TRACK_PATTERN_OFFSETS Newxz(ri->u.offsets, 2*RExC_size+1, U32); /* MJD 20001228 */ DEBUG_OFFSETS_r(PerlIO_printf(Perl_debug_log, "%s %"UVuf" bytes for offset annotations.\n", ri->u.offsets ? "Got" : "Couldn't get", (UV)((2*RExC_size+1) * sizeof(U32)))); #endif SetProgLen(ri,RExC_size); RExC_rx_sv = rx; RExC_rx = r; RExC_rxi = ri; /* Second pass: emit code. */ RExC_flags = rx_flags; /* don't let top level (?i) bleed */ RExC_pm_flags = pm_flags; RExC_parse = exp; RExC_end = xend; RExC_naughty = 0; RExC_npar = 1; RExC_emit_start = ri->program; RExC_emit = ri->program; RExC_emit_bound = ri->program + RExC_size + 1; pRExC_state->code_index = 0; REGC((U8)REG_MAGIC, (char*) RExC_emit++); if (reg(pRExC_state, 0, &flags,1) == NULL) { ReREFCNT_dec(rx); return(NULL); } /* XXXX To minimize changes to RE engine we always allocate 3-units-long substrs field. */ Newx(r->substrs, 1, struct reg_substr_data); if (RExC_recurse_count) { Newxz(RExC_recurse,RExC_recurse_count,regnode *); SAVEFREEPV(RExC_recurse); } reStudy: r->minlen = minlen = sawlookahead = sawplus = sawopen = 0; Zero(r->substrs, 1, struct reg_substr_data); #ifdef TRIE_STUDY_OPT if (!restudied) { StructCopy(&zero_scan_data, &data, scan_data_t); copyRExC_state = RExC_state; } else { U32 seen=RExC_seen; DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log,"Restudying\n")); RExC_state = copyRExC_state; if (seen & REG_TOP_LEVEL_BRANCHES) RExC_seen |= REG_TOP_LEVEL_BRANCHES; else RExC_seen &= ~REG_TOP_LEVEL_BRANCHES; if (data.last_found) { SvREFCNT_dec(data.longest_fixed); SvREFCNT_dec(data.longest_float); SvREFCNT_dec(data.last_found); } StructCopy(&zero_scan_data, &data, scan_data_t); } #else StructCopy(&zero_scan_data, &data, scan_data_t); #endif /* Dig out information for optimizations. */ r->extflags = RExC_flags; /* was pm_op */ /*dmq: removed as part of de-PMOP: pm->op_pmflags = RExC_flags; */ if (UTF) SvUTF8_on(rx); /* Unicode in it? */ ri->regstclass = NULL; if (RExC_naughty >= 10) /* Probably an expensive pattern. */ r->intflags |= PREGf_NAUGHTY; scan = ri->program + 1; /* First BRANCH. */ /* testing for BRANCH here tells us whether there is "must appear" data in the pattern. If there is then we can use it for optimisations */ if (!(RExC_seen & REG_TOP_LEVEL_BRANCHES)) { /* Only one top-level choice. */ I32 fake; STRLEN longest_float_length, longest_fixed_length; struct regnode_charclass_class ch_class; /* pointed to by data */ int stclass_flag; I32 last_close = 0; /* pointed to by data */ regnode *first= scan; regnode *first_next= regnext(first); /* * Skip introductions and multiplicators >= 1 * so that we can extract the 'meat' of the pattern that must * match in the large if() sequence following. * NOTE that EXACT is NOT covered here, as it is normally * picked up by the optimiser separately. * * This is unfortunate as the optimiser isnt handling lookahead * properly currently. * */ while ((OP(first) == OPEN && (sawopen = 1)) || /* An OR of *one* alternative - should not happen now. */ (OP(first) == BRANCH && OP(first_next) != BRANCH) || /* for now we can't handle lookbehind IFMATCH*/ (OP(first) == IFMATCH && !first->flags && (sawlookahead = 1)) || (OP(first) == PLUS) || (OP(first) == MINMOD) || /* An {n,m} with n>0 */ (PL_regkind[OP(first)] == CURLY && ARG1(first) > 0) || (OP(first) == NOTHING && PL_regkind[OP(first_next)] != END )) { /* * the only op that could be a regnode is PLUS, all the rest * will be regnode_1 or regnode_2. * */ if (OP(first) == PLUS) sawplus = 1; else first += regarglen[OP(first)]; first = NEXTOPER(first); first_next= regnext(first); } /* Starting-point info. */ again: DEBUG_PEEP("first:",first,0); /* Ignore EXACT as we deal with it later. */ if (PL_regkind[OP(first)] == EXACT) { if (OP(first) == EXACT) NOOP; /* Empty, get anchored substr later. */ else ri->regstclass = first; } #ifdef TRIE_STCLASS else if (PL_regkind[OP(first)] == TRIE && ((reg_trie_data *)ri->data->data[ ARG(first) ])->minlen>0) { regnode *trie_op; /* this can happen only on restudy */ if ( OP(first) == TRIE ) { struct regnode_1 *trieop = (struct regnode_1 *) PerlMemShared_calloc(1, sizeof(struct regnode_1)); StructCopy(first,trieop,struct regnode_1); trie_op=(regnode *)trieop; } else { struct regnode_charclass *trieop = (struct regnode_charclass *) PerlMemShared_calloc(1, sizeof(struct regnode_charclass)); StructCopy(first,trieop,struct regnode_charclass); trie_op=(regnode *)trieop; } OP(trie_op)+=2; make_trie_failtable(pRExC_state, (regnode *)first, trie_op, 0); ri->regstclass = trie_op; } #endif else if (REGNODE_SIMPLE(OP(first))) ri->regstclass = first; else if (PL_regkind[OP(first)] == BOUND || PL_regkind[OP(first)] == NBOUND) ri->regstclass = first; else if (PL_regkind[OP(first)] == BOL) { r->extflags |= (OP(first) == MBOL ? RXf_ANCH_MBOL : (OP(first) == SBOL ? RXf_ANCH_SBOL : RXf_ANCH_BOL)); first = NEXTOPER(first); goto again; } else if (OP(first) == GPOS) { r->extflags |= RXf_ANCH_GPOS; first = NEXTOPER(first); goto again; } else if ((!sawopen || !RExC_sawback) && (OP(first) == STAR && PL_regkind[OP(NEXTOPER(first))] == REG_ANY) && !(r->extflags & RXf_ANCH) && !pRExC_state->num_code_blocks) { /* turn .* into ^.* with an implied $*=1 */ const int type = (OP(NEXTOPER(first)) == REG_ANY) ? RXf_ANCH_MBOL : RXf_ANCH_SBOL; r->extflags |= type; r->intflags |= PREGf_IMPLICIT; first = NEXTOPER(first); goto again; } if (sawplus && !sawlookahead && (!sawopen || !RExC_sawback) && !pRExC_state->num_code_blocks) /* May examine pos and $& */ /* x+ must match at the 1st pos of run of x's */ r->intflags |= PREGf_SKIP; /* Scan is after the zeroth branch, first is atomic matcher. */ #ifdef TRIE_STUDY_OPT DEBUG_PARSE_r( if (!restudied) PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n", (IV)(first - scan + 1)) ); #else DEBUG_PARSE_r( PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n", (IV)(first - scan + 1)) ); #endif /* * If there's something expensive in the r.e., find the * longest literal string that must appear and make it the * regmust. Resolve ties in favor of later strings, since * the regstart check works with the beginning of the r.e. * and avoiding duplication strengthens checking. Not a * strong reason, but sufficient in the absence of others. * [Now we resolve ties in favor of the earlier string if * it happens that c_offset_min has been invalidated, since the * earlier string may buy us something the later one won't.] */ data.longest_fixed = newSVpvs(""); data.longest_float = newSVpvs(""); data.last_found = newSVpvs(""); data.longest = &(data.longest_fixed); first = scan; if (!ri->regstclass) { cl_init(pRExC_state, &ch_class); data.start_class = &ch_class; stclass_flag = SCF_DO_STCLASS_AND; } else /* XXXX Check for BOUND? */ stclass_flag = 0; data.last_closep = &last_close; minlen = study_chunk(pRExC_state, &first, &minlen, &fake, scan + RExC_size, /* Up to end */ &data, -1, NULL, NULL, SCF_DO_SUBSTR | SCF_WHILEM_VISITED_POS | stclass_flag,0); CHECK_RESTUDY_GOTO; if ( RExC_npar == 1 && data.longest == &(data.longest_fixed) && data.last_start_min == 0 && data.last_end > 0 && !RExC_seen_zerolen && !(RExC_seen & REG_SEEN_VERBARG) && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS))) r->extflags |= RXf_CHECK_ALL; scan_commit(pRExC_state, &data,&minlen,0); SvREFCNT_dec(data.last_found); longest_float_length = CHR_SVLEN(data.longest_float); if (! ((SvCUR(data.longest_fixed) /* ok to leave SvCUR */ && data.offset_fixed == data.offset_float_min && SvCUR(data.longest_fixed) == SvCUR(data.longest_float))) && S_setup_longest (aTHX_ pRExC_state, data.longest_float, &(r->float_utf8), &(r->float_substr), &(r->float_end_shift), data.lookbehind_float, data.offset_float_min, data.minlen_float, longest_float_length, data.flags & SF_FL_BEFORE_EOL, data.flags & SF_FL_BEFORE_MEOL)) { r->float_min_offset = data.offset_float_min - data.lookbehind_float; r->float_max_offset = data.offset_float_max; if (data.offset_float_max < I32_MAX) /* Don't offset infinity */ r->float_max_offset -= data.lookbehind_float; } else { r->float_substr = r->float_utf8 = NULL; SvREFCNT_dec(data.longest_float); longest_float_length = 0; } longest_fixed_length = CHR_SVLEN(data.longest_fixed); if (S_setup_longest (aTHX_ pRExC_state, data.longest_fixed, &(r->anchored_utf8), &(r->anchored_substr), &(r->anchored_end_shift), data.lookbehind_fixed, data.offset_fixed, data.minlen_fixed, longest_fixed_length, data.flags & SF_FIX_BEFORE_EOL, data.flags & SF_FIX_BEFORE_MEOL)) { r->anchored_offset = data.offset_fixed - data.lookbehind_fixed; } else { r->anchored_substr = r->anchored_utf8 = NULL; SvREFCNT_dec(data.longest_fixed); longest_fixed_length = 0; } if (ri->regstclass && (OP(ri->regstclass) == REG_ANY || OP(ri->regstclass) == SANY)) ri->regstclass = NULL; if ((!(r->anchored_substr || r->anchored_utf8) || r->anchored_offset) && stclass_flag && !(data.start_class->flags & ANYOF_EOS) && !cl_is_anything(data.start_class)) { const U32 n = add_data(pRExC_state, 1, "f"); data.start_class->flags |= ANYOF_IS_SYNTHETIC; Newx(RExC_rxi->data->data[n], 1, struct regnode_charclass_class); StructCopy(data.start_class, (struct regnode_charclass_class*)RExC_rxi->data->data[n], struct regnode_charclass_class); ri->regstclass = (regnode*)RExC_rxi->data->data[n]; r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */ DEBUG_COMPILE_r({ SV *sv = sv_newmortal(); regprop(r, sv, (regnode*)data.start_class); PerlIO_printf(Perl_debug_log, "synthetic stclass \"%s\".\n", SvPVX_const(sv));}); } /* A temporary algorithm prefers floated substr to fixed one to dig more info. */ if (longest_fixed_length > longest_float_length) { r->check_end_shift = r->anchored_end_shift; r->check_substr = r->anchored_substr; r->check_utf8 = r->anchored_utf8; r->check_offset_min = r->check_offset_max = r->anchored_offset; if (r->extflags & RXf_ANCH_SINGLE) r->extflags |= RXf_NOSCAN; } else { r->check_end_shift = r->float_end_shift; r->check_substr = r->float_substr; r->check_utf8 = r->float_utf8; r->check_offset_min = r->float_min_offset; r->check_offset_max = r->float_max_offset; } /* XXXX Currently intuiting is not compatible with ANCH_GPOS. This should be changed ASAP! */ if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) { r->extflags |= RXf_USE_INTUIT; if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8)) r->extflags |= RXf_INTUIT_TAIL; } /* XXX Unneeded? dmq (shouldn't as this is handled elsewhere) if ( (STRLEN)minlen < longest_float_length ) minlen= longest_float_length; if ( (STRLEN)minlen < longest_fixed_length ) minlen= longest_fixed_length; */ } else { /* Several toplevels. Best we can is to set minlen. */ I32 fake; struct regnode_charclass_class ch_class; I32 last_close = 0; DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "\nMulti Top Level\n")); scan = ri->program + 1; cl_init(pRExC_state, &ch_class); data.start_class = &ch_class; data.last_closep = &last_close; minlen = study_chunk(pRExC_state, &scan, &minlen, &fake, scan + RExC_size, &data, -1, NULL, NULL, SCF_DO_STCLASS_AND|SCF_WHILEM_VISITED_POS,0); CHECK_RESTUDY_GOTO; r->check_substr = r->check_utf8 = r->anchored_substr = r->anchored_utf8 = r->float_substr = r->float_utf8 = NULL; if (!(data.start_class->flags & ANYOF_EOS) && !cl_is_anything(data.start_class)) { const U32 n = add_data(pRExC_state, 1, "f"); data.start_class->flags |= ANYOF_IS_SYNTHETIC; Newx(RExC_rxi->data->data[n], 1, struct regnode_charclass_class); StructCopy(data.start_class, (struct regnode_charclass_class*)RExC_rxi->data->data[n], struct regnode_charclass_class); ri->regstclass = (regnode*)RExC_rxi->data->data[n]; r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */ DEBUG_COMPILE_r({ SV* sv = sv_newmortal(); regprop(r, sv, (regnode*)data.start_class); PerlIO_printf(Perl_debug_log, "synthetic stclass \"%s\".\n", SvPVX_const(sv));}); } } /* Guard against an embedded (?=) or (?<=) with a longer minlen than the "real" pattern. */ DEBUG_OPTIMISE_r({ PerlIO_printf(Perl_debug_log,"minlen: %"IVdf" r->minlen:%"IVdf"\n", (IV)minlen, (IV)r->minlen); }); r->minlenret = minlen; if (r->minlen < minlen) r->minlen = minlen; if (RExC_seen & REG_SEEN_GPOS) r->extflags |= RXf_GPOS_SEEN; if (RExC_seen & REG_SEEN_LOOKBEHIND) r->extflags |= RXf_LOOKBEHIND_SEEN; if (pRExC_state->num_code_blocks) r->extflags |= RXf_EVAL_SEEN; if (RExC_seen & REG_SEEN_CANY) r->extflags |= RXf_CANY_SEEN; if (RExC_seen & REG_SEEN_VERBARG) { r->intflags |= PREGf_VERBARG_SEEN; r->extflags |= RXf_MODIFIES_VARS; } if (RExC_seen & REG_SEEN_CUTGROUP) r->intflags |= PREGf_CUTGROUP_SEEN; if (pm_flags & PMf_USE_RE_EVAL) r->intflags |= PREGf_USE_RE_EVAL; if (RExC_paren_names) RXp_PAREN_NAMES(r) = MUTABLE_HV(SvREFCNT_inc(RExC_paren_names)); else RXp_PAREN_NAMES(r) = NULL; #ifdef STUPID_PATTERN_CHECKS if (RX_PRELEN(rx) == 0) r->extflags |= RXf_NULL; if (RX_PRELEN(rx) == 3 && memEQ("\\s+", RX_PRECOMP(rx), 3)) r->extflags |= RXf_WHITE; else if (RX_PRELEN(rx) == 1 && RXp_PRECOMP(rx)[0] == '^') r->extflags |= RXf_START_ONLY; #else { regnode *first = ri->program + 1; U8 fop = OP(first); if (PL_regkind[fop] == NOTHING && OP(NEXTOPER(first)) == END) r->extflags |= RXf_NULL; else if (PL_regkind[fop] == BOL && OP(NEXTOPER(first)) == END) r->extflags |= RXf_START_ONLY; else if (fop == PLUS && OP(NEXTOPER(first)) == SPACE && OP(regnext(first)) == END) r->extflags |= RXf_WHITE; } #endif #ifdef DEBUGGING if (RExC_paren_names) { ri->name_list_idx = add_data( pRExC_state, 1, "a" ); ri->data->data[ri->name_list_idx] = (void*)SvREFCNT_inc(RExC_paren_name_list); } else #endif ri->name_list_idx = 0; if (RExC_recurse_count) { for ( ; RExC_recurse_count ; RExC_recurse_count-- ) { const regnode *scan = RExC_recurse[RExC_recurse_count-1]; ARG2L_SET( scan, RExC_open_parens[ARG(scan)-1] - scan ); } } Newxz(r->offs, RExC_npar, regexp_paren_pair); /* assume we don't need to swap parens around before we match */ DEBUG_DUMP_r({ PerlIO_printf(Perl_debug_log,"Final program:\n"); regdump(r); }); #ifdef RE_TRACK_PATTERN_OFFSETS DEBUG_OFFSETS_r(if (ri->u.offsets) { const U32 len = ri->u.offsets[0]; U32 i; GET_RE_DEBUG_FLAGS_DECL; PerlIO_printf(Perl_debug_log, "Offsets: [%"UVuf"]\n\t", (UV)ri->u.offsets[0]); for (i = 1; i <= len; i++) { if (ri->u.offsets[i*2-1] || ri->u.offsets[i*2]) PerlIO_printf(Perl_debug_log, "%"UVuf":%"UVuf"[%"UVuf"] ", (UV)i, (UV)ri->u.offsets[i*2-1], (UV)ri->u.offsets[i*2]); } PerlIO_printf(Perl_debug_log, "\n"); }); #endif return rx; } SV* Perl_reg_named_buff(pTHX_ REGEXP * const rx, SV * const key, SV * const value, const U32 flags) { PERL_ARGS_ASSERT_REG_NAMED_BUFF; PERL_UNUSED_ARG(value); if (flags & RXapif_FETCH) { return reg_named_buff_fetch(rx, key, flags); } else if (flags & (RXapif_STORE | RXapif_DELETE | RXapif_CLEAR)) { Perl_croak_no_modify(aTHX); return NULL; } else if (flags & RXapif_EXISTS) { return reg_named_buff_exists(rx, key, flags) ? &PL_sv_yes : &PL_sv_no; } else if (flags & RXapif_REGNAMES) { return reg_named_buff_all(rx, flags); } else if (flags & (RXapif_SCALAR | RXapif_REGNAMES_COUNT)) { return reg_named_buff_scalar(rx, flags); } else { Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff", (int)flags); return NULL; } } SV* Perl_reg_named_buff_iter(pTHX_ REGEXP * const rx, const SV * const lastkey, const U32 flags) { PERL_ARGS_ASSERT_REG_NAMED_BUFF_ITER; PERL_UNUSED_ARG(lastkey); if (flags & RXapif_FIRSTKEY) return reg_named_buff_firstkey(rx, flags); else if (flags & RXapif_NEXTKEY) return reg_named_buff_nextkey(rx, flags); else { Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_iter", (int)flags); return NULL; } } SV* Perl_reg_named_buff_fetch(pTHX_ REGEXP * const r, SV * const namesv, const U32 flags) { AV *retarray = NULL; SV *ret; struct regexp *const rx = (struct regexp *)SvANY(r); PERL_ARGS_ASSERT_REG_NAMED_BUFF_FETCH; if (flags & RXapif_ALL) retarray=newAV(); if (rx && RXp_PAREN_NAMES(rx)) { HE *he_str = hv_fetch_ent( RXp_PAREN_NAMES(rx), namesv, 0, 0 ); if (he_str) { IV i; SV* sv_dat=HeVAL(he_str); I32 *nums=(I32*)SvPVX(sv_dat); for ( i=0; inparens) >= nums[i] && rx->offs[nums[i]].start != -1 && rx->offs[nums[i]].end != -1) { ret = newSVpvs(""); CALLREG_NUMBUF_FETCH(r,nums[i],ret); if (!retarray) return ret; } else { if (retarray) ret = newSVsv(&PL_sv_undef); } if (retarray) av_push(retarray, ret); } if (retarray) return newRV_noinc(MUTABLE_SV(retarray)); } } return NULL; } bool Perl_reg_named_buff_exists(pTHX_ REGEXP * const r, SV * const key, const U32 flags) { struct regexp *const rx = (struct regexp *)SvANY(r); PERL_ARGS_ASSERT_REG_NAMED_BUFF_EXISTS; if (rx && RXp_PAREN_NAMES(rx)) { if (flags & RXapif_ALL) { return hv_exists_ent(RXp_PAREN_NAMES(rx), key, 0); } else { SV *sv = CALLREG_NAMED_BUFF_FETCH(r, key, flags); if (sv) { SvREFCNT_dec(sv); return TRUE; } else { return FALSE; } } } else { return FALSE; } } SV* Perl_reg_named_buff_firstkey(pTHX_ REGEXP * const r, const U32 flags) { struct regexp *const rx = (struct regexp *)SvANY(r); PERL_ARGS_ASSERT_REG_NAMED_BUFF_FIRSTKEY; if ( rx && RXp_PAREN_NAMES(rx) ) { (void)hv_iterinit(RXp_PAREN_NAMES(rx)); return CALLREG_NAMED_BUFF_NEXTKEY(r, NULL, flags & ~RXapif_FIRSTKEY); } else { return FALSE; } } SV* Perl_reg_named_buff_nextkey(pTHX_ REGEXP * const r, const U32 flags) { struct regexp *const rx = (struct regexp *)SvANY(r); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REG_NAMED_BUFF_NEXTKEY; if (rx && RXp_PAREN_NAMES(rx)) { HV *hv = RXp_PAREN_NAMES(rx); HE *temphe; while ( (temphe = hv_iternext_flags(hv,0)) ) { IV i; IV parno = 0; SV* sv_dat = HeVAL(temphe); I32 *nums = (I32*)SvPVX(sv_dat); for ( i = 0; i < SvIVX(sv_dat); i++ ) { if ((I32)(rx->lastparen) >= nums[i] && rx->offs[nums[i]].start != -1 && rx->offs[nums[i]].end != -1) { parno = nums[i]; break; } } if (parno || flags & RXapif_ALL) { return newSVhek(HeKEY_hek(temphe)); } } } return NULL; } SV* Perl_reg_named_buff_scalar(pTHX_ REGEXP * const r, const U32 flags) { SV *ret; AV *av; I32 length; struct regexp *const rx = (struct regexp *)SvANY(r); PERL_ARGS_ASSERT_REG_NAMED_BUFF_SCALAR; if (rx && RXp_PAREN_NAMES(rx)) { if (flags & (RXapif_ALL | RXapif_REGNAMES_COUNT)) { return newSViv(HvTOTALKEYS(RXp_PAREN_NAMES(rx))); } else if (flags & RXapif_ONE) { ret = CALLREG_NAMED_BUFF_ALL(r, (flags | RXapif_REGNAMES)); av = MUTABLE_AV(SvRV(ret)); length = av_len(av); SvREFCNT_dec(ret); return newSViv(length + 1); } else { Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_scalar", (int)flags); return NULL; } } return &PL_sv_undef; } SV* Perl_reg_named_buff_all(pTHX_ REGEXP * const r, const U32 flags) { struct regexp *const rx = (struct regexp *)SvANY(r); AV *av = newAV(); PERL_ARGS_ASSERT_REG_NAMED_BUFF_ALL; if (rx && RXp_PAREN_NAMES(rx)) { HV *hv= RXp_PAREN_NAMES(rx); HE *temphe; (void)hv_iterinit(hv); while ( (temphe = hv_iternext_flags(hv,0)) ) { IV i; IV parno = 0; SV* sv_dat = HeVAL(temphe); I32 *nums = (I32*)SvPVX(sv_dat); for ( i = 0; i < SvIVX(sv_dat); i++ ) { if ((I32)(rx->lastparen) >= nums[i] && rx->offs[nums[i]].start != -1 && rx->offs[nums[i]].end != -1) { parno = nums[i]; break; } } if (parno || flags & RXapif_ALL) { av_push(av, newSVhek(HeKEY_hek(temphe))); } } } return newRV_noinc(MUTABLE_SV(av)); } void Perl_reg_numbered_buff_fetch(pTHX_ REGEXP * const r, const I32 paren, SV * const sv) { struct regexp *const rx = (struct regexp *)SvANY(r); char *s = NULL; I32 i = 0; I32 s1, t1; I32 n = paren; PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_FETCH; if ( ( n == RX_BUFF_IDX_CARET_PREMATCH || n == RX_BUFF_IDX_CARET_FULLMATCH || n == RX_BUFF_IDX_CARET_POSTMATCH ) && !(rx->extflags & RXf_PMf_KEEPCOPY) ) goto ret_undef; if (!rx->subbeg) goto ret_undef; if (n == RX_BUFF_IDX_CARET_FULLMATCH) /* no need to distinguish between them any more */ n = RX_BUFF_IDX_FULLMATCH; if ((n == RX_BUFF_IDX_PREMATCH || n == RX_BUFF_IDX_CARET_PREMATCH) && rx->offs[0].start != -1) { /* $`, ${^PREMATCH} */ i = rx->offs[0].start; s = rx->subbeg; } else if ((n == RX_BUFF_IDX_POSTMATCH || n == RX_BUFF_IDX_CARET_POSTMATCH) && rx->offs[0].end != -1) { /* $', ${^POSTMATCH} */ s = rx->subbeg - rx->suboffset + rx->offs[0].end; i = rx->sublen + rx->suboffset - rx->offs[0].end; } else if ( 0 <= n && n <= (I32)rx->nparens && (s1 = rx->offs[n].start) != -1 && (t1 = rx->offs[n].end) != -1) { /* $&, ${^MATCH}, $1 ... */ i = t1 - s1; s = rx->subbeg + s1 - rx->suboffset; } else { goto ret_undef; } assert(s >= rx->subbeg); assert(rx->sublen >= (s - rx->subbeg) + i ); if (i >= 0) { const int oldtainted = PL_tainted; TAINT_NOT; sv_setpvn(sv, s, i); PL_tainted = oldtainted; if ( (rx->extflags & RXf_CANY_SEEN) ? (RXp_MATCH_UTF8(rx) && (!i || is_utf8_string((U8*)s, i))) : (RXp_MATCH_UTF8(rx)) ) { SvUTF8_on(sv); } else SvUTF8_off(sv); if (PL_tainting) { if (RXp_MATCH_TAINTED(rx)) { if (SvTYPE(sv) >= SVt_PVMG) { MAGIC* const mg = SvMAGIC(sv); MAGIC* mgt; PL_tainted = 1; SvMAGIC_set(sv, mg->mg_moremagic); SvTAINT(sv); if ((mgt = SvMAGIC(sv))) { mg->mg_moremagic = mgt; SvMAGIC_set(sv, mg); } } else { PL_tainted = 1; SvTAINT(sv); } } else SvTAINTED_off(sv); } } else { ret_undef: sv_setsv(sv,&PL_sv_undef); return; } } void Perl_reg_numbered_buff_store(pTHX_ REGEXP * const rx, const I32 paren, SV const * const value) { PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_STORE; PERL_UNUSED_ARG(rx); PERL_UNUSED_ARG(paren); PERL_UNUSED_ARG(value); if (!PL_localizing) Perl_croak_no_modify(aTHX); } I32 Perl_reg_numbered_buff_length(pTHX_ REGEXP * const r, const SV * const sv, const I32 paren) { struct regexp *const rx = (struct regexp *)SvANY(r); I32 i; I32 s1, t1; PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_LENGTH; /* Some of this code was originally in C in F */ switch (paren) { case RX_BUFF_IDX_CARET_PREMATCH: /* ${^PREMATCH} */ if (!(rx->extflags & RXf_PMf_KEEPCOPY)) goto warn_undef; /*FALLTHROUGH*/ case RX_BUFF_IDX_PREMATCH: /* $` */ if (rx->offs[0].start != -1) { i = rx->offs[0].start; if (i > 0) { s1 = 0; t1 = i; goto getlen; } } return 0; case RX_BUFF_IDX_CARET_POSTMATCH: /* ${^POSTMATCH} */ if (!(rx->extflags & RXf_PMf_KEEPCOPY)) goto warn_undef; case RX_BUFF_IDX_POSTMATCH: /* $' */ if (rx->offs[0].end != -1) { i = rx->sublen - rx->offs[0].end; if (i > 0) { s1 = rx->offs[0].end; t1 = rx->sublen; goto getlen; } } return 0; case RX_BUFF_IDX_CARET_FULLMATCH: /* ${^MATCH} */ if (!(rx->extflags & RXf_PMf_KEEPCOPY)) goto warn_undef; /*FALLTHROUGH*/ /* $& / ${^MATCH}, $1, $2, ... */ default: if (paren <= (I32)rx->nparens && (s1 = rx->offs[paren].start) != -1 && (t1 = rx->offs[paren].end) != -1) { i = t1 - s1; goto getlen; } else { warn_undef: if (ckWARN(WARN_UNINITIALIZED)) report_uninit((const SV *)sv); return 0; } } getlen: if (i > 0 && RXp_MATCH_UTF8(rx)) { const char * const s = rx->subbeg - rx->suboffset + s1; const U8 *ep; STRLEN el; i = t1 - s1; if (is_utf8_string_loclen((U8*)s, i, &ep, &el)) i = el; } return i; } SV* Perl_reg_qr_package(pTHX_ REGEXP * const rx) { PERL_ARGS_ASSERT_REG_QR_PACKAGE; PERL_UNUSED_ARG(rx); if (0) return NULL; else return newSVpvs("Regexp"); } /* Scans the name of a named buffer from the pattern. * If flags is REG_RSN_RETURN_NULL returns null. * If flags is REG_RSN_RETURN_NAME returns an SV* containing the name * If flags is REG_RSN_RETURN_DATA returns the data SV* corresponding * to the parsed name as looked up in the RExC_paren_names hash. * If there is an error throws a vFAIL().. type exception. */ #define REG_RSN_RETURN_NULL 0 #define REG_RSN_RETURN_NAME 1 #define REG_RSN_RETURN_DATA 2 STATIC SV* S_reg_scan_name(pTHX_ RExC_state_t *pRExC_state, U32 flags) { char *name_start = RExC_parse; PERL_ARGS_ASSERT_REG_SCAN_NAME; if (isIDFIRST_lazy_if(RExC_parse, UTF)) { /* skip IDFIRST by using do...while */ if (UTF) do { RExC_parse += UTF8SKIP(RExC_parse); } while (isALNUM_utf8((U8*)RExC_parse)); else do { RExC_parse++; } while (isALNUM(*RExC_parse)); } else { RExC_parse++; /* so the <- from the vFAIL is after the offending character */ vFAIL("Group name must start with a non-digit word character"); } if ( flags ) { SV* sv_name = newSVpvn_flags(name_start, (int)(RExC_parse - name_start), SVs_TEMP | (UTF ? SVf_UTF8 : 0)); if ( flags == REG_RSN_RETURN_NAME) return sv_name; else if (flags==REG_RSN_RETURN_DATA) { HE *he_str = NULL; SV *sv_dat = NULL; if ( ! sv_name ) /* should not happen*/ Perl_croak(aTHX_ "panic: no svname in reg_scan_name"); if (RExC_paren_names) he_str = hv_fetch_ent( RExC_paren_names, sv_name, 0, 0 ); if ( he_str ) sv_dat = HeVAL(he_str); if ( ! sv_dat ) vFAIL("Reference to nonexistent named group"); return sv_dat; } else { Perl_croak(aTHX_ "panic: bad flag %lx in reg_scan_name", (unsigned long) flags); } assert(0); /* NOT REACHED */ } return NULL; } #define DEBUG_PARSE_MSG(funcname) DEBUG_PARSE_r({ \ int rem=(int)(RExC_end - RExC_parse); \ int cut; \ int num; \ int iscut=0; \ if (rem>10) { \ rem=10; \ iscut=1; \ } \ cut=10-rem; \ if (RExC_lastparse!=RExC_parse) \ PerlIO_printf(Perl_debug_log," >%.*s%-*s", \ rem, RExC_parse, \ cut + 4, \ iscut ? "..." : "<" \ ); \ else \ PerlIO_printf(Perl_debug_log,"%16s",""); \ \ if (SIZE_ONLY) \ num = RExC_size + 1; \ else \ num=REG_NODE_NUM(RExC_emit); \ if (RExC_lastnum!=num) \ PerlIO_printf(Perl_debug_log,"|%4d",num); \ else \ PerlIO_printf(Perl_debug_log,"|%4s",""); \ PerlIO_printf(Perl_debug_log,"|%*s%-4s", \ (int)((depth*2)), "", \ (funcname) \ ); \ RExC_lastnum=num; \ RExC_lastparse=RExC_parse; \ }) #define DEBUG_PARSE(funcname) DEBUG_PARSE_r({ \ DEBUG_PARSE_MSG((funcname)); \ PerlIO_printf(Perl_debug_log,"%4s","\n"); \ }) #define DEBUG_PARSE_FMT(funcname,fmt,args) DEBUG_PARSE_r({ \ DEBUG_PARSE_MSG((funcname)); \ PerlIO_printf(Perl_debug_log,fmt "\n",args); \ }) /* This section of code defines the inversion list object and its methods. The * interfaces are highly subject to change, so as much as possible is static to * this file. An inversion list is here implemented as a malloc'd C UV array * with some added info that is placed as UVs at the beginning in a header * portion. An inversion list for Unicode is an array of code points, sorted * by ordinal number. The zeroth element is the first code point in the list. * The 1th element is the first element beyond that not in the list. In other * words, the first range is * invlist[0]..(invlist[1]-1) * The other ranges follow. Thus every element whose index is divisible by two * marks the beginning of a range that is in the list, and every element not * divisible by two marks the beginning of a range not in the list. A single * element inversion list that contains the single code point N generally * consists of two elements * invlist[0] == N * invlist[1] == N+1 * (The exception is when N is the highest representable value on the * machine, in which case the list containing just it would be a single * element, itself. By extension, if the last range in the list extends to * infinity, then the first element of that range will be in the inversion list * at a position that is divisible by two, and is the final element in the * list.) * Taking the complement (inverting) an inversion list is quite simple, if the * first element is 0, remove it; otherwise add a 0 element at the beginning. * This implementation reserves an element at the beginning of each inversion * list to contain 0 when the list contains 0, and contains 1 otherwise. The * actual beginning of the list is either that element if 0, or the next one if * 1. * * More about inversion lists can be found in "Unicode Demystified" * Chapter 13 by Richard Gillam, published by Addison-Wesley. * More will be coming when functionality is added later. * * The inversion list data structure is currently implemented as an SV pointing * to an array of UVs that the SV thinks are bytes. This allows us to have an * array of UV whose memory management is automatically handled by the existing * facilities for SV's. * * Some of the methods should always be private to the implementation, and some * should eventually be made public */ /* The header definitions are in F */ #define TO_INTERNAL_SIZE(x) ((x + HEADER_LENGTH) * sizeof(UV)) #define FROM_INTERNAL_SIZE(x) ((x / sizeof(UV)) - HEADER_LENGTH) #define INVLIST_INITIAL_LEN 10 PERL_STATIC_INLINE UV* S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0) { /* Returns a pointer to the first element in the inversion list's array. * This is called upon initialization of an inversion list. Where the * array begins depends on whether the list has the code point U+0000 * in it or not. The other parameter tells it whether the code that * follows this call is about to put a 0 in the inversion list or not. * The first element is either the element with 0, if 0, or the next one, * if 1 */ UV* zero = get_invlist_zero_addr(invlist); PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT; /* Must be empty */ assert(! *_get_invlist_len_addr(invlist)); /* 1^1 = 0; 1^0 = 1 */ *zero = 1 ^ will_have_0; return zero + *zero; } PERL_STATIC_INLINE UV* S_invlist_array(pTHX_ SV* const invlist) { /* Returns the pointer to the inversion list's array. Every time the * length changes, this needs to be called in case malloc or realloc moved * it */ PERL_ARGS_ASSERT_INVLIST_ARRAY; /* Must not be empty. If these fail, you probably didn't check for * being non-zero before trying to get the array */ assert(*_get_invlist_len_addr(invlist)); assert(*get_invlist_zero_addr(invlist) == 0 || *get_invlist_zero_addr(invlist) == 1); /* The array begins either at the element reserved for zero if the * list contains 0 (that element will be set to 0), or otherwise the next * element (in which case the reserved element will be set to 1). */ return (UV *) (get_invlist_zero_addr(invlist) + *get_invlist_zero_addr(invlist)); } PERL_STATIC_INLINE void S_invlist_set_len(pTHX_ SV* const invlist, const UV len) { /* Sets the current number of elements stored in the inversion list */ PERL_ARGS_ASSERT_INVLIST_SET_LEN; *_get_invlist_len_addr(invlist) = len; assert(len <= SvLEN(invlist)); SvCUR_set(invlist, TO_INTERNAL_SIZE(len)); /* If the list contains U+0000, that element is part of the header, * and should not be counted as part of the array. It will contain * 0 in that case, and 1 otherwise. So we could flop 0=>1, 1=>0 and * subtract: * SvCUR_set(invlist, * TO_INTERNAL_SIZE(len * - (*get_invlist_zero_addr(inv_list) ^ 1))); * But, this is only valid if len is not 0. The consequences of not doing * this is that the memory allocation code may think that 1 more UV is * being used than actually is, and so might do an unnecessary grow. That * seems worth not bothering to make this the precise amount. * * Note that when inverting, SvCUR shouldn't change */ } PERL_STATIC_INLINE IV* S_get_invlist_previous_index_addr(pTHX_ SV* invlist) { /* Return the address of the UV that is reserved to hold the cached index * */ PERL_ARGS_ASSERT_GET_INVLIST_PREVIOUS_INDEX_ADDR; return (IV *) (SvPVX(invlist) + (INVLIST_PREVIOUS_INDEX_OFFSET * sizeof (UV))); } PERL_STATIC_INLINE IV S_invlist_previous_index(pTHX_ SV* const invlist) { /* Returns cached index of previous search */ PERL_ARGS_ASSERT_INVLIST_PREVIOUS_INDEX; return *get_invlist_previous_index_addr(invlist); } PERL_STATIC_INLINE void S_invlist_set_previous_index(pTHX_ SV* const invlist, const IV index) { /* Caches for later retrieval */ PERL_ARGS_ASSERT_INVLIST_SET_PREVIOUS_INDEX; assert(index == 0 || index < (int) _invlist_len(invlist)); *get_invlist_previous_index_addr(invlist) = index; } PERL_STATIC_INLINE UV S_invlist_max(pTHX_ SV* const invlist) { /* Returns the maximum number of elements storable in the inversion list's * array, without having to realloc() */ PERL_ARGS_ASSERT_INVLIST_MAX; return FROM_INTERNAL_SIZE(SvLEN(invlist)); } PERL_STATIC_INLINE UV* S_get_invlist_zero_addr(pTHX_ SV* invlist) { /* Return the address of the UV that is reserved to hold 0 if the inversion * list contains 0. This has to be the last element of the heading, as the * list proper starts with either it if 0, or the next element if not. * (But we force it to contain either 0 or 1) */ PERL_ARGS_ASSERT_GET_INVLIST_ZERO_ADDR; return (UV *) (SvPVX(invlist) + (INVLIST_ZERO_OFFSET * sizeof (UV))); } #ifndef PERL_IN_XSUB_RE SV* Perl__new_invlist(pTHX_ IV initial_size) { /* Return a pointer to a newly constructed inversion list, with enough * space to store 'initial_size' elements. If that number is negative, a * system default is used instead */ SV* new_list; if (initial_size < 0) { initial_size = INVLIST_INITIAL_LEN; } /* Allocate the initial space */ new_list = newSV(TO_INTERNAL_SIZE(initial_size)); invlist_set_len(new_list, 0); /* Force iterinit() to be used to get iteration to work */ *get_invlist_iter_addr(new_list) = UV_MAX; /* This should force a segfault if a method doesn't initialize this * properly */ *get_invlist_zero_addr(new_list) = UV_MAX; *get_invlist_previous_index_addr(new_list) = 0; *get_invlist_version_id_addr(new_list) = INVLIST_VERSION_ID; #if HEADER_LENGTH != 5 # error Need to regenerate VERSION_ID by running perl -E 'say int(rand 2**31-1)', and then changing the #if to the new length #endif return new_list; } #endif STATIC SV* S__new_invlist_C_array(pTHX_ UV* list) { /* Return a pointer to a newly constructed inversion list, initialized to * point to , which has to be in the exact correct inversion list * form, including internal fields. Thus this is a dangerous routine that * should not be used in the wrong hands */ SV* invlist = newSV_type(SVt_PV); PERL_ARGS_ASSERT__NEW_INVLIST_C_ARRAY; SvPV_set(invlist, (char *) list); SvLEN_set(invlist, 0); /* Means we own the contents, and the system shouldn't touch it */ SvCUR_set(invlist, TO_INTERNAL_SIZE(_invlist_len(invlist))); if (*get_invlist_version_id_addr(invlist) != INVLIST_VERSION_ID) { Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list"); } return invlist; } STATIC void S_invlist_extend(pTHX_ SV* const invlist, const UV new_max) { /* Grow the maximum size of an inversion list */ PERL_ARGS_ASSERT_INVLIST_EXTEND; SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max)); } PERL_STATIC_INLINE void S_invlist_trim(pTHX_ SV* const invlist) { PERL_ARGS_ASSERT_INVLIST_TRIM; /* Change the length of the inversion list to how many entries it currently * has */ SvPV_shrink_to_cur((SV *) invlist); } #define _invlist_union_complement_2nd(a, b, output) _invlist_union_maybe_complement_2nd(a, b, TRUE, output) STATIC void S__append_range_to_invlist(pTHX_ SV* const invlist, const UV start, const UV end) { /* Subject to change or removal. Append the range from 'start' to 'end' at * the end of the inversion list. The range must be above any existing * ones. */ UV* array; UV max = invlist_max(invlist); UV len = _invlist_len(invlist); PERL_ARGS_ASSERT__APPEND_RANGE_TO_INVLIST; if (len == 0) { /* Empty lists must be initialized */ array = _invlist_array_init(invlist, start == 0); } else { /* Here, the existing list is non-empty. The current max entry in the * list is generally the first value not in the set, except when the * set extends to the end of permissible values, in which case it is * the first entry in that final set, and so this call is an attempt to * append out-of-order */ UV final_element = len - 1; array = invlist_array(invlist); if (array[final_element] > start || ELEMENT_RANGE_MATCHES_INVLIST(final_element)) { Perl_croak(aTHX_ "panic: attempting to append to an inversion list, but wasn't at the end of the list, final=%"UVuf", start=%"UVuf", match=%c", array[final_element], start, ELEMENT_RANGE_MATCHES_INVLIST(final_element) ? 't' : 'f'); } /* Here, it is a legal append. If the new range begins with the first * value not in the set, it is extending the set, so the new first * value not in the set is one greater than the newly extended range. * */ if (array[final_element] == start) { if (end != UV_MAX) { array[final_element] = end + 1; } else { /* But if the end is the maximum representable on the machine, * just let the range that this would extend to have no end */ invlist_set_len(invlist, len - 1); } return; } } /* Here the new range doesn't extend any existing set. Add it */ len += 2; /* Includes an element each for the start and end of range */ /* If overflows the existing space, extend, which may cause the array to be * moved */ if (max < len) { invlist_extend(invlist, len); invlist_set_len(invlist, len); /* Have to set len here to avoid assert failure in invlist_array() */ array = invlist_array(invlist); } else { invlist_set_len(invlist, len); } /* The next item on the list starts the range, the one after that is * one past the new range. */ array[len - 2] = start; if (end != UV_MAX) { array[len - 1] = end + 1; } else { /* But if the end is the maximum representable on the machine, just let * the range have no end */ invlist_set_len(invlist, len - 1); } } #ifndef PERL_IN_XSUB_RE IV Perl__invlist_search(pTHX_ SV* const invlist, const UV cp) { /* Searches the inversion list for the entry that contains the input code * point . If is not in the list, -1 is returned. Otherwise, the * return value is the index into the list's array of the range that * contains */ IV low = 0; IV mid; IV high = _invlist_len(invlist); const IV highest_element = high - 1; const UV* array; PERL_ARGS_ASSERT__INVLIST_SEARCH; /* If list is empty, return failure. */ if (high == 0) { return -1; } /* If the code point is before the first element, return failure. (We * can't combine this with the test above, because we can't get the array * unless we know the list is non-empty) */ array = invlist_array(invlist); mid = invlist_previous_index(invlist); assert(mid >=0 && mid <= highest_element); /* contains the cache of the result of the previous call to this * function (0 the first time). See if this call is for the same result, * or if it is for mid-1. This is under the theory that calls to this * function will often be for related code points that are near each other. * And benchmarks show that caching gives better results. We also test * here if the code point is within the bounds of the list. These tests * replace others that would have had to be made anyway to make sure that * the array bounds were not exceeded, and give us extra information at the * same time */ if (cp >= array[mid]) { if (cp >= array[highest_element]) { return highest_element; } /* Here, array[mid] <= cp < array[highest_element]. This means that * the final element is not the answer, so can exclude it; it also * means that is not the final element, so can refer to 'mid + 1' * safely */ if (cp < array[mid + 1]) { return mid; } high--; low = mid + 1; } else { /* cp < aray[mid] */ if (cp < array[0]) { /* Fail if outside the array */ return -1; } high = mid; if (cp >= array[mid - 1]) { goto found_entry; } } /* Binary search. What we are looking for is such that * array[i] <= cp < array[i+1] * The loop below converges on the i+1. Note that there may not be an * (i+1)th element in the array, and things work nonetheless */ while (low < high) { mid = (low + high) / 2; assert(mid <= highest_element); if (array[mid] <= cp) { /* cp >= array[mid] */ low = mid + 1; /* We could do this extra test to exit the loop early. if (cp < array[low]) { return mid; } */ } else { /* cp < array[mid] */ high = mid; } } found_entry: high--; invlist_set_previous_index(invlist, high); return high; } void Perl__invlist_populate_swatch(pTHX_ SV* const invlist, const UV start, const UV end, U8* swatch) { /* populates a swatch of a swash the same way swatch_get() does in utf8.c, * but is used when the swash has an inversion list. This makes this much * faster, as it uses a binary search instead of a linear one. This is * intimately tied to that function, and perhaps should be in utf8.c, * except it is intimately tied to inversion lists as well. It assumes * that is all 0's on input */ UV current = start; const IV len = _invlist_len(invlist); IV i; const UV * array; PERL_ARGS_ASSERT__INVLIST_POPULATE_SWATCH; if (len == 0) { /* Empty inversion list */ return; } array = invlist_array(invlist); /* Find which element it is */ i = _invlist_search(invlist, start); /* We populate from to */ while (current < end) { UV upper; /* The inversion list gives the results for every possible code point * after the first one in the list. Only those ranges whose index is * even are ones that the inversion list matches. For the odd ones, * and if the initial code point is not in the list, we have to skip * forward to the next element */ if (i == -1 || ! ELEMENT_RANGE_MATCHES_INVLIST(i)) { i++; if (i >= len) { /* Finished if beyond the end of the array */ return; } current = array[i]; if (current >= end) { /* Finished if beyond the end of what we are populating */ if (LIKELY(end < UV_MAX)) { return; } /* We get here when the upper bound is the maximum * representable on the machine, and we are looking for just * that code point. Have to special case it */ i = len; goto join_end_of_list; } } assert(current >= start); /* The current range ends one below the next one, except don't go past * */ i++; upper = (i < len && array[i] < end) ? array[i] : end; /* Here we are in a range that matches. Populate a bit in the 3-bit U8 * for each code point in it */ for (; current < upper; current++) { const STRLEN offset = (STRLEN)(current - start); swatch[offset >> 3] |= 1 << (offset & 7); } join_end_of_list: /* Quit if at the end of the list */ if (i >= len) { /* But first, have to deal with the highest possible code point on * the platform. The previous code assumes that is one * beyond where we want to populate, but that is impossible at the * platform's infinity, so have to handle it specially */ if (UNLIKELY(end == UV_MAX && ELEMENT_RANGE_MATCHES_INVLIST(len-1))) { const STRLEN offset = (STRLEN)(end - start); swatch[offset >> 3] |= 1 << (offset & 7); } return; } /* Advance to the next range, which will be for code points not in the * inversion list */ current = array[i]; } return; } void Perl__invlist_union_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** output) { /* Take the union of two inversion lists and point to it. *output * should be defined upon input, and if it points to one of the two lists, * the reference count to that list will be decremented. The first list, * , may be NULL, in which case a copy of the second list is returned. * If is TRUE, the union is taken of the complement * (inversion) of instead of b itself. * * The basis for this comes from "Unicode Demystified" Chapter 13 by * Richard Gillam, published by Addison-Wesley, and explained at some * length there. The preface says to incorporate its examples into your * code at your own risk. * * The algorithm is like a merge sort. * * XXX A potential performance improvement is to keep track as we go along * if only one of the inputs contributes to the result, meaning the other * is a subset of that one. In that case, we can skip the final copy and * return the larger of the input lists, but then outside code might need * to keep track of whether to free the input list or not */ UV* array_a; /* a's array */ UV* array_b; UV len_a; /* length of a's array */ UV len_b; SV* u; /* the resulting union */ UV* array_u; UV len_u; UV i_a = 0; /* current index into a's array */ UV i_b = 0; UV i_u = 0; /* running count, as explained in the algorithm source book; items are * stopped accumulating and are output when the count changes to/from 0. * The count is incremented when we start a range that's in the set, and * decremented when we start a range that's not in the set. So its range * is 0 to 2. Only when the count is zero is something not in the set. */ UV count = 0; PERL_ARGS_ASSERT__INVLIST_UNION_MAYBE_COMPLEMENT_2ND; assert(a != b); /* If either one is empty, the union is the other one */ if (a == NULL || ((len_a = _invlist_len(a)) == 0)) { if (*output == a) { if (a != NULL) { SvREFCNT_dec(a); } } if (*output != b) { *output = invlist_clone(b); if (complement_b) { _invlist_invert(*output); } } /* else *output already = b; */ return; } else if ((len_b = _invlist_len(b)) == 0) { if (*output == b) { SvREFCNT_dec(b); } /* The complement of an empty list is a list that has everything in it, * so the union with includes everything too */ if (complement_b) { if (a == *output) { SvREFCNT_dec(a); } *output = _new_invlist(1); _append_range_to_invlist(*output, 0, UV_MAX); } else if (*output != a) { *output = invlist_clone(a); } /* else *output already = a; */ return; } /* Here both lists exist and are non-empty */ array_a = invlist_array(a); array_b = invlist_array(b); /* If are to take the union of 'a' with the complement of b, set it * up so are looking at b's complement. */ if (complement_b) { /* To complement, we invert: if the first element is 0, remove it. To * do this, we just pretend the array starts one later, and clear the * flag as we don't have to do anything else later */ if (array_b[0] == 0) { array_b++; len_b--; complement_b = FALSE; } else { /* But if the first element is not zero, we unshift a 0 before the * array. The data structure reserves a space for that 0 (which * should be a '1' right now), so physical shifting is unneeded, * but temporarily change that element to 0. Before exiting the * routine, we must restore the element to '1' */ array_b--; len_b++; array_b[0] = 0; } } /* Size the union for the worst case: that the sets are completely * disjoint */ u = _new_invlist(len_a + len_b); /* Will contain U+0000 if either component does */ array_u = _invlist_array_init(u, (len_a > 0 && array_a[0] == 0) || (len_b > 0 && array_b[0] == 0)); /* Go through each list item by item, stopping when exhausted one of * them */ while (i_a < len_a && i_b < len_b) { UV cp; /* The element to potentially add to the union's array */ bool cp_in_set; /* is it in the the input list's set or not */ /* We need to take one or the other of the two inputs for the union. * Since we are merging two sorted lists, we take the smaller of the * next items. In case of a tie, we take the one that is in its set * first. If we took one not in the set first, it would decrement the * count, possibly to 0 which would cause it to be output as ending the * range, and the next time through we would take the same number, and * output it again as beginning the next range. By doing it the * opposite way, there is no possibility that the count will be * momentarily decremented to 0, and thus the two adjoining ranges will * be seamlessly merged. (In a tie and both are in the set or both not * in the set, it doesn't matter which we take first.) */ if (array_a[i_a] < array_b[i_b] || (array_a[i_a] == array_b[i_b] && ELEMENT_RANGE_MATCHES_INVLIST(i_a))) { cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_a); cp= array_a[i_a++]; } else { cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_b); cp= array_b[i_b++]; } /* Here, have chosen which of the two inputs to look at. Only output * if the running count changes to/from 0, which marks the * beginning/end of a range in that's in the set */ if (cp_in_set) { if (count == 0) { array_u[i_u++] = cp; } count++; } else { count--; if (count == 0) { array_u[i_u++] = cp; } } } /* Here, we are finished going through at least one of the lists, which * means there is something remaining in at most one. We check if the list * that hasn't been exhausted is positioned such that we are in the middle * of a range in its set or not. (i_a and i_b point to the element beyond * the one we care about.) If in the set, we decrement 'count'; if 0, there * is potentially more to output. * There are four cases: * 1) Both weren't in their sets, count is 0, and remains 0. What's left * in the union is entirely from the non-exhausted set. * 2) Both were in their sets, count is 2. Nothing further should * be output, as everything that remains will be in the exhausted * list's set, hence in the union; decrementing to 1 but not 0 insures * that * 3) the exhausted was in its set, non-exhausted isn't, count is 1. * Nothing further should be output because the union includes * everything from the exhausted set. Not decrementing ensures that. * 4) the exhausted wasn't in its set, non-exhausted is, count is 1; * decrementing to 0 insures that we look at the remainder of the * non-exhausted set */ if ((i_a != len_a && PREV_RANGE_MATCHES_INVLIST(i_a)) || (i_b != len_b && PREV_RANGE_MATCHES_INVLIST(i_b))) { count--; } /* The final length is what we've output so far, plus what else is about to * be output. (If 'count' is non-zero, then the input list we exhausted * has everything remaining up to the machine's limit in its set, and hence * in the union, so there will be no further output. */ len_u = i_u; if (count == 0) { /* At most one of the subexpressions will be non-zero */ len_u += (len_a - i_a) + (len_b - i_b); } /* Set result to final length, which can change the pointer to array_u, so * re-find it */ if (len_u != _invlist_len(u)) { invlist_set_len(u, len_u); invlist_trim(u); array_u = invlist_array(u); } /* When 'count' is 0, the list that was exhausted (if one was shorter than * the other) ended with everything above it not in its set. That means * that the remaining part of the union is precisely the same as the * non-exhausted list, so can just copy it unchanged. (If both list were * exhausted at the same time, then the operations below will be both 0.) */ if (count == 0) { IV copy_count; /* At most one will have a non-zero copy count */ if ((copy_count = len_a - i_a) > 0) { Copy(array_a + i_a, array_u + i_u, copy_count, UV); } else if ((copy_count = len_b - i_b) > 0) { Copy(array_b + i_b, array_u + i_u, copy_count, UV); } } /* We may be removing a reference to one of the inputs */ if (a == *output || b == *output) { SvREFCNT_dec(*output); } /* If we've changed b, restore it */ if (complement_b) { array_b[0] = 1; } *output = u; return; } void Perl__invlist_intersection_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** i) { /* Take the intersection of two inversion lists and point to it. *i * should be defined upon input, and if it points to one of the two lists, * the reference count to that list will be decremented. * If is TRUE, the result will be the intersection of * and the complement (or inversion) of instead of directly. * * The basis for this comes from "Unicode Demystified" Chapter 13 by * Richard Gillam, published by Addison-Wesley, and explained at some * length there. The preface says to incorporate its examples into your * code at your own risk. In fact, it had bugs * * The algorithm is like a merge sort, and is essentially the same as the * union above */ UV* array_a; /* a's array */ UV* array_b; UV len_a; /* length of a's array */ UV len_b; SV* r; /* the resulting intersection */ UV* array_r; UV len_r; UV i_a = 0; /* current index into a's array */ UV i_b = 0; UV i_r = 0; /* running count, as explained in the algorithm source book; items are * stopped accumulating and are output when the count changes to/from 2. * The count is incremented when we start a range that's in the set, and * decremented when we start a range that's not in the set. So its range * is 0 to 2. Only when the count is 2 is something in the intersection. */ UV count = 0; PERL_ARGS_ASSERT__INVLIST_INTERSECTION_MAYBE_COMPLEMENT_2ND; assert(a != b); /* Special case if either one is empty */ len_a = _invlist_len(a); if ((len_a == 0) || ((len_b = _invlist_len(b)) == 0)) { if (len_a != 0 && complement_b) { /* Here, 'a' is not empty, therefore from the above 'if', 'b' must * be empty. Here, also we are using 'b's complement, which hence * must be every possible code point. Thus the intersection is * simply 'a'. */ if (*i != a) { *i = invlist_clone(a); if (*i == b) { SvREFCNT_dec(b); } } /* else *i is already 'a' */ return; } /* Here, 'a' or 'b' is empty and not using the complement of 'b'. The * intersection must be empty */ if (*i == a) { SvREFCNT_dec(a); } else if (*i == b) { SvREFCNT_dec(b); } *i = _new_invlist(0); return; } /* Here both lists exist and are non-empty */ array_a = invlist_array(a); array_b = invlist_array(b); /* If are to take the intersection of 'a' with the complement of b, set it * up so are looking at b's complement. */ if (complement_b) { /* To complement, we invert: if the first element is 0, remove it. To * do this, we just pretend the array starts one later, and clear the * flag as we don't have to do anything else later */ if (array_b[0] == 0) { array_b++; len_b--; complement_b = FALSE; } else { /* But if the first element is not zero, we unshift a 0 before the * array. The data structure reserves a space for that 0 (which * should be a '1' right now), so physical shifting is unneeded, * but temporarily change that element to 0. Before exiting the * routine, we must restore the element to '1' */ array_b--; len_b++; array_b[0] = 0; } } /* Size the intersection for the worst case: that the intersection ends up * fragmenting everything to be completely disjoint */ r= _new_invlist(len_a + len_b); /* Will contain U+0000 iff both components do */ array_r = _invlist_array_init(r, len_a > 0 && array_a[0] == 0 && len_b > 0 && array_b[0] == 0); /* Go through each list item by item, stopping when exhausted one of * them */ while (i_a < len_a && i_b < len_b) { UV cp; /* The element to potentially add to the intersection's array */ bool cp_in_set; /* Is it in the input list's set or not */ /* We need to take one or the other of the two inputs for the * intersection. Since we are merging two sorted lists, we take the * smaller of the next items. In case of a tie, we take the one that * is not in its set first (a difference from the union algorithm). If * we took one in the set first, it would increment the count, possibly * to 2 which would cause it to be output as starting a range in the * intersection, and the next time through we would take that same * number, and output it again as ending the set. By doing it the * opposite of this, there is no possibility that the count will be * momentarily incremented to 2. (In a tie and both are in the set or * both not in the set, it doesn't matter which we take first.) */ if (array_a[i_a] < array_b[i_b] || (array_a[i_a] == array_b[i_b] && ! ELEMENT_RANGE_MATCHES_INVLIST(i_a))) { cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_a); cp= array_a[i_a++]; } else { cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_b); cp= array_b[i_b++]; } /* Here, have chosen which of the two inputs to look at. Only output * if the running count changes to/from 2, which marks the * beginning/end of a range that's in the intersection */ if (cp_in_set) { count++; if (count == 2) { array_r[i_r++] = cp; } } else { if (count == 2) { array_r[i_r++] = cp; } count--; } } /* Here, we are finished going through at least one of the lists, which * means there is something remaining in at most one. We check if the list * that has been exhausted is positioned such that we are in the middle * of a range in its set or not. (i_a and i_b point to elements 1 beyond * the ones we care about.) There are four cases: * 1) Both weren't in their sets, count is 0, and remains 0. There's * nothing left in the intersection. * 2) Both were in their sets, count is 2 and perhaps is incremented to * above 2. What should be output is exactly that which is in the * non-exhausted set, as everything it has is also in the intersection * set, and everything it doesn't have can't be in the intersection * 3) The exhausted was in its set, non-exhausted isn't, count is 1, and * gets incremented to 2. Like the previous case, the intersection is * everything that remains in the non-exhausted set. * 4) the exhausted wasn't in its set, non-exhausted is, count is 1, and * remains 1. And the intersection has nothing more. */ if ((i_a == len_a && PREV_RANGE_MATCHES_INVLIST(i_a)) || (i_b == len_b && PREV_RANGE_MATCHES_INVLIST(i_b))) { count++; } /* The final length is what we've output so far plus what else is in the * intersection. At most one of the subexpressions below will be non-zero */ len_r = i_r; if (count >= 2) { len_r += (len_a - i_a) + (len_b - i_b); } /* Set result to final length, which can change the pointer to array_r, so * re-find it */ if (len_r != _invlist_len(r)) { invlist_set_len(r, len_r); invlist_trim(r); array_r = invlist_array(r); } /* Finish outputting any remaining */ if (count >= 2) { /* At most one will have a non-zero copy count */ IV copy_count; if ((copy_count = len_a - i_a) > 0) { Copy(array_a + i_a, array_r + i_r, copy_count, UV); } else if ((copy_count = len_b - i_b) > 0) { Copy(array_b + i_b, array_r + i_r, copy_count, UV); } } /* We may be removing a reference to one of the inputs */ if (a == *i || b == *i) { SvREFCNT_dec(*i); } /* If we've changed b, restore it */ if (complement_b) { array_b[0] = 1; } *i = r; return; } SV* Perl__add_range_to_invlist(pTHX_ SV* invlist, const UV start, const UV end) { /* Add the range from 'start' to 'end' inclusive to the inversion list's * set. A pointer to the inversion list is returned. This may actually be * a new list, in which case the passed in one has been destroyed. The * passed in inversion list can be NULL, in which case a new one is created * with just the one range in it */ SV* range_invlist; UV len; if (invlist == NULL) { invlist = _new_invlist(2); len = 0; } else { len = _invlist_len(invlist); } /* If comes after the final entry, can just append it to the end */ if (len == 0 || start >= invlist_array(invlist) [_invlist_len(invlist) - 1]) { _append_range_to_invlist(invlist, start, end); return invlist; } /* Here, can't just append things, create and return a new inversion list * which is the union of this range and the existing inversion list */ range_invlist = _new_invlist(2); _append_range_to_invlist(range_invlist, start, end); _invlist_union(invlist, range_invlist, &invlist); /* The temporary can be freed */ SvREFCNT_dec(range_invlist); return invlist; } #endif PERL_STATIC_INLINE SV* S_add_cp_to_invlist(pTHX_ SV* invlist, const UV cp) { return _add_range_to_invlist(invlist, cp, cp); } #ifndef PERL_IN_XSUB_RE void Perl__invlist_invert(pTHX_ SV* const invlist) { /* Complement the input inversion list. This adds a 0 if the list didn't * have a zero; removes it otherwise. As described above, the data * structure is set up so that this is very efficient */ UV* len_pos = _get_invlist_len_addr(invlist); PERL_ARGS_ASSERT__INVLIST_INVERT; /* The inverse of matching nothing is matching everything */ if (*len_pos == 0) { _append_range_to_invlist(invlist, 0, UV_MAX); return; } /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the * zero element was a 0, so it is being removed, so the length decrements * by 1; and vice-versa. SvCUR is unaffected */ if (*get_invlist_zero_addr(invlist) ^= 1) { (*len_pos)--; } else { (*len_pos)++; } } void Perl__invlist_invert_prop(pTHX_ SV* const invlist) { /* Complement the input inversion list (which must be a Unicode property, * all of which don't match above the Unicode maximum code point.) And * Perl has chosen to not have the inversion match above that either. This * adds a 0x110000 if the list didn't end with it, and removes it if it did */ UV len; UV* array; PERL_ARGS_ASSERT__INVLIST_INVERT_PROP; _invlist_invert(invlist); len = _invlist_len(invlist); if (len != 0) { /* If empty do nothing */ array = invlist_array(invlist); if (array[len - 1] != PERL_UNICODE_MAX + 1) { /* Add 0x110000. First, grow if necessary */ len++; if (invlist_max(invlist) < len) { invlist_extend(invlist, len); array = invlist_array(invlist); } invlist_set_len(invlist, len); array[len - 1] = PERL_UNICODE_MAX + 1; } else { /* Remove the 0x110000 */ invlist_set_len(invlist, len - 1); } } return; } #endif PERL_STATIC_INLINE SV* S_invlist_clone(pTHX_ SV* const invlist) { /* Return a new inversion list that is a copy of the input one, which is * unchanged */ /* Need to allocate extra space to accommodate Perl's addition of a * trailing NUL to SvPV's, since it thinks they are always strings */ SV* new_invlist = _new_invlist(_invlist_len(invlist) + 1); STRLEN length = SvCUR(invlist); PERL_ARGS_ASSERT_INVLIST_CLONE; SvCUR_set(new_invlist, length); /* This isn't done automatically */ Copy(SvPVX(invlist), SvPVX(new_invlist), length, char); return new_invlist; } PERL_STATIC_INLINE UV* S_get_invlist_iter_addr(pTHX_ SV* invlist) { /* Return the address of the UV that contains the current iteration * position */ PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR; return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV))); } PERL_STATIC_INLINE UV* S_get_invlist_version_id_addr(pTHX_ SV* invlist) { /* Return the address of the UV that contains the version id. */ PERL_ARGS_ASSERT_GET_INVLIST_VERSION_ID_ADDR; return (UV *) (SvPVX(invlist) + (INVLIST_VERSION_ID_OFFSET * sizeof (UV))); } PERL_STATIC_INLINE void S_invlist_iterinit(pTHX_ SV* invlist) /* Initialize iterator for invlist */ { PERL_ARGS_ASSERT_INVLIST_ITERINIT; *get_invlist_iter_addr(invlist) = 0; } STATIC bool S_invlist_iternext(pTHX_ SV* invlist, UV* start, UV* end) { /* An C call on must be used to set this up. * This call sets in <*start> and <*end>, the next range in . * Returns if successful and the next call will return the next * range; if was already at the end of the list. If the latter, * <*start> and <*end> are unchanged, and the next call to this function * will start over at the beginning of the list */ UV* pos = get_invlist_iter_addr(invlist); UV len = _invlist_len(invlist); UV *array; PERL_ARGS_ASSERT_INVLIST_ITERNEXT; if (*pos >= len) { *pos = UV_MAX; /* Force iternit() to be required next time */ return FALSE; } array = invlist_array(invlist); *start = array[(*pos)++]; if (*pos >= len) { *end = UV_MAX; } else { *end = array[(*pos)++] - 1; } return TRUE; } PERL_STATIC_INLINE UV S_invlist_highest(pTHX_ SV* const invlist) { /* Returns the highest code point that matches an inversion list. This API * has an ambiguity, as it returns 0 under either the highest is actually * 0, or if the list is empty. If this distinction matters to you, check * for emptiness before calling this function */ UV len = _invlist_len(invlist); UV *array; PERL_ARGS_ASSERT_INVLIST_HIGHEST; if (len == 0) { return 0; } array = invlist_array(invlist); /* The last element in the array in the inversion list always starts a * range that goes to infinity. That range may be for code points that are * matched in the inversion list, or it may be for ones that aren't * matched. In the latter case, the highest code point in the set is one * less than the beginning of this range; otherwise it is the final element * of this range: infinity */ return (ELEMENT_RANGE_MATCHES_INVLIST(len - 1)) ? UV_MAX : array[len - 1] - 1; } #ifndef PERL_IN_XSUB_RE SV * Perl__invlist_contents(pTHX_ SV* const invlist) { /* Get the contents of an inversion list into a string SV so that they can * be printed out. It uses the format traditionally done for debug tracing */ UV start, end; SV* output = newSVpvs("\n"); PERL_ARGS_ASSERT__INVLIST_CONTENTS; invlist_iterinit(invlist); while (invlist_iternext(invlist, &start, &end)) { if (end == UV_MAX) { Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\tINFINITY\n", start); } else if (end != start) { Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\t%04"UVXf"\n", start, end); } else { Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\n", start); } } return output; } #endif #if 0 void S_invlist_dump(pTHX_ SV* const invlist, const char * const header) { /* Dumps out the ranges in an inversion list. The string 'header' * if present is output on a line before the first range */ UV start, end; if (header && strlen(header)) { PerlIO_printf(Perl_debug_log, "%s\n", header); } invlist_iterinit(invlist); while (invlist_iternext(invlist, &start, &end)) { if (end == UV_MAX) { PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. INFINITY\n", start); } else { PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. 0x%04"UVXf"\n", start, end); } } } #endif #if 0 bool S__invlistEQ(pTHX_ SV* const a, SV* const b, bool complement_b) { /* Return a boolean as to if the two passed in inversion lists are * identical. The final argument, if TRUE, says to take the complement of * the second inversion list before doing the comparison */ UV* array_a = invlist_array(a); UV* array_b = invlist_array(b); UV len_a = _invlist_len(a); UV len_b = _invlist_len(b); UV i = 0; /* current index into the arrays */ bool retval = TRUE; /* Assume are identical until proven otherwise */ PERL_ARGS_ASSERT__INVLISTEQ; /* If are to compare 'a' with the complement of b, set it * up so are looking at b's complement. */ if (complement_b) { /* The complement of nothing is everything, so would have to have * just one element, starting at zero (ending at infinity) */ if (len_b == 0) { return (len_a == 1 && array_a[0] == 0); } else if (array_b[0] == 0) { /* Otherwise, to complement, we invert. Here, the first element is * 0, just remove it. To do this, we just pretend the array starts * one later, and clear the flag as we don't have to do anything * else later */ array_b++; len_b--; complement_b = FALSE; } else { /* But if the first element is not zero, we unshift a 0 before the * array. The data structure reserves a space for that 0 (which * should be a '1' right now), so physical shifting is unneeded, * but temporarily change that element to 0. Before exiting the * routine, we must restore the element to '1' */ array_b--; len_b++; array_b[0] = 0; } } /* Make sure that the lengths are the same, as well as the final element * before looping through the remainder. (Thus we test the length, final, * and first elements right off the bat) */ if (len_a != len_b || array_a[len_a-1] != array_b[len_a-1]) { retval = FALSE; } else for (i = 0; i < len_a - 1; i++) { if (array_a[i] != array_b[i]) { retval = FALSE; break; } } if (complement_b) { array_b[0] = 1; } return retval; } #endif #undef HEADER_LENGTH #undef INVLIST_INITIAL_LENGTH #undef TO_INTERNAL_SIZE #undef FROM_INTERNAL_SIZE #undef INVLIST_LEN_OFFSET #undef INVLIST_ZERO_OFFSET #undef INVLIST_ITER_OFFSET #undef INVLIST_VERSION_ID /* End of inversion list object */ /* - reg - regular expression, i.e. main body or parenthesized thing * * Caller must absorb opening parenthesis. * * Combining parenthesis handling with the base level of regular expression * is a trifle forced, but the need to tie the tails of the branches to what * follows makes it hard to avoid. */ #define REGTAIL(x,y,z) regtail((x),(y),(z),depth+1) #ifdef DEBUGGING #define REGTAIL_STUDY(x,y,z) regtail_study((x),(y),(z),depth+1) #else #define REGTAIL_STUDY(x,y,z) regtail((x),(y),(z),depth+1) #endif STATIC regnode * S_reg(pTHX_ RExC_state_t *pRExC_state, I32 paren, I32 *flagp,U32 depth) /* paren: Parenthesized? 0=top, 1=(, inside: changed to letter. */ { dVAR; regnode *ret; /* Will be the head of the group. */ regnode *br; regnode *lastbr; regnode *ender = NULL; I32 parno = 0; I32 flags; U32 oregflags = RExC_flags; bool have_branch = 0; bool is_open = 0; I32 freeze_paren = 0; I32 after_freeze = 0; /* for (?g), (?gc), and (?o) warnings; warning about (?c) will warn about (?g) -- japhy */ #define WASTED_O 0x01 #define WASTED_G 0x02 #define WASTED_C 0x04 #define WASTED_GC (0x02|0x04) I32 wastedflags = 0x00; char * parse_start = RExC_parse; /* MJD */ char * const oregcomp_parse = RExC_parse; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REG; DEBUG_PARSE("reg "); *flagp = 0; /* Tentatively. */ /* Make an OPEN node, if parenthesized. */ if (paren) { if ( *RExC_parse == '*') { /* (*VERB:ARG) */ char *start_verb = RExC_parse; STRLEN verb_len = 0; char *start_arg = NULL; unsigned char op = 0; int argok = 1; int internal_argval = 0; /* internal_argval is only useful if !argok */ while ( *RExC_parse && *RExC_parse != ')' ) { if ( *RExC_parse == ':' ) { start_arg = RExC_parse + 1; break; } RExC_parse++; } ++start_verb; verb_len = RExC_parse - start_verb; if ( start_arg ) { RExC_parse++; while ( *RExC_parse && *RExC_parse != ')' ) RExC_parse++; if ( *RExC_parse != ')' ) vFAIL("Unterminated verb pattern argument"); if ( RExC_parse == start_arg ) start_arg = NULL; } else { if ( *RExC_parse != ')' ) vFAIL("Unterminated verb pattern"); } switch ( *start_verb ) { case 'A': /* (*ACCEPT) */ if ( memEQs(start_verb,verb_len,"ACCEPT") ) { op = ACCEPT; internal_argval = RExC_nestroot; } break; case 'C': /* (*COMMIT) */ if ( memEQs(start_verb,verb_len,"COMMIT") ) op = COMMIT; break; case 'F': /* (*FAIL) */ if ( verb_len==1 || memEQs(start_verb,verb_len,"FAIL") ) { op = OPFAIL; argok = 0; } break; case ':': /* (*:NAME) */ case 'M': /* (*MARK:NAME) */ if ( verb_len==0 || memEQs(start_verb,verb_len,"MARK") ) { op = MARKPOINT; argok = -1; } break; case 'P': /* (*PRUNE) */ if ( memEQs(start_verb,verb_len,"PRUNE") ) op = PRUNE; break; case 'S': /* (*SKIP) */ if ( memEQs(start_verb,verb_len,"SKIP") ) op = SKIP; break; case 'T': /* (*THEN) */ /* [19:06] :: is then */ if ( memEQs(start_verb,verb_len,"THEN") ) { op = CUTGROUP; RExC_seen |= REG_SEEN_CUTGROUP; } break; } if ( ! op ) { RExC_parse++; vFAIL3("Unknown verb pattern '%.*s'", verb_len, start_verb); } if ( argok ) { if ( start_arg && internal_argval ) { vFAIL3("Verb pattern '%.*s' may not have an argument", verb_len, start_verb); } else if ( argok < 0 && !start_arg ) { vFAIL3("Verb pattern '%.*s' has a mandatory argument", verb_len, start_verb); } else { ret = reganode(pRExC_state, op, internal_argval); if ( ! internal_argval && ! SIZE_ONLY ) { if (start_arg) { SV *sv = newSVpvn( start_arg, RExC_parse - start_arg); ARG(ret) = add_data( pRExC_state, 1, "S" ); RExC_rxi->data->data[ARG(ret)]=(void*)sv; ret->flags = 0; } else { ret->flags = 1; } } } if (!internal_argval) RExC_seen |= REG_SEEN_VERBARG; } else if ( start_arg ) { vFAIL3("Verb pattern '%.*s' may not have an argument", verb_len, start_verb); } else { ret = reg_node(pRExC_state, op); } nextchar(pRExC_state); return ret; } else if (*RExC_parse == '?') { /* (?...) */ bool is_logical = 0; const char * const seqstart = RExC_parse; bool has_use_defaults = FALSE; RExC_parse++; paren = *RExC_parse++; ret = NULL; /* For look-ahead/behind. */ switch (paren) { case 'P': /* (?P...) variants for those used to PCRE/Python */ paren = *RExC_parse++; if ( paren == '<') /* (?P<...>) named capture */ goto named_capture; else if (paren == '>') { /* (?P>name) named recursion */ goto named_recursion; } else if (paren == '=') { /* (?P=...) named backref */ /* this pretty much dupes the code for \k in regatom(), if you change this make sure you change that */ char* name_start = RExC_parse; U32 num = 0; SV *sv_dat = reg_scan_name(pRExC_state, SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA); if (RExC_parse == name_start || *RExC_parse != ')') vFAIL2("Sequence %.3s... not terminated",parse_start); if (!SIZE_ONLY) { num = add_data( pRExC_state, 1, "S" ); RExC_rxi->data->data[num]=(void*)sv_dat; SvREFCNT_inc_simple_void(sv_dat); } RExC_sawback = 1; ret = reganode(pRExC_state, ((! FOLD) ? NREF : (ASCII_FOLD_RESTRICTED) ? NREFFA : (AT_LEAST_UNI_SEMANTICS) ? NREFFU : (LOC) ? NREFFL : NREFF), num); *flagp |= HASWIDTH; Set_Node_Offset(ret, parse_start+1); Set_Node_Cur_Length(ret); /* MJD */ nextchar(pRExC_state); return ret; } RExC_parse++; vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart); /*NOTREACHED*/ case '<': /* (?<...) */ if (*RExC_parse == '!') paren = ','; else if (*RExC_parse != '=') named_capture: { /* (?<...>) */ char *name_start; SV *svname; paren= '>'; case '\'': /* (?'...') */ name_start= RExC_parse; svname = reg_scan_name(pRExC_state, SIZE_ONLY ? /* reverse test from the others */ REG_RSN_RETURN_NAME : REG_RSN_RETURN_NULL); if (RExC_parse == name_start) { RExC_parse++; vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart); /*NOTREACHED*/ } if (*RExC_parse != paren) vFAIL2("Sequence (?%c... not terminated", paren=='>' ? '<' : paren); if (SIZE_ONLY) { HE *he_str; SV *sv_dat = NULL; if (!svname) /* shouldn't happen */ Perl_croak(aTHX_ "panic: reg_scan_name returned NULL"); if (!RExC_paren_names) { RExC_paren_names= newHV(); sv_2mortal(MUTABLE_SV(RExC_paren_names)); #ifdef DEBUGGING RExC_paren_name_list= newAV(); sv_2mortal(MUTABLE_SV(RExC_paren_name_list)); #endif } he_str = hv_fetch_ent( RExC_paren_names, svname, 1, 0 ); if ( he_str ) sv_dat = HeVAL(he_str); if ( ! sv_dat ) { /* croak baby croak */ Perl_croak(aTHX_ "panic: paren_name hash element allocation failed"); } else if ( SvPOK(sv_dat) ) { /* (?|...) can mean we have dupes so scan to check its already been stored. Maybe a flag indicating we are inside such a construct would be useful, but the arrays are likely to be quite small, so for now we punt -- dmq */ IV count = SvIV(sv_dat); I32 *pv = (I32*)SvPVX(sv_dat); IV i; for ( i = 0 ; i < count ; i++ ) { if ( pv[i] == RExC_npar ) { count = 0; break; } } if ( count ) { pv = (I32*)SvGROW(sv_dat, SvCUR(sv_dat) + sizeof(I32)+1); SvCUR_set(sv_dat, SvCUR(sv_dat) + sizeof(I32)); pv[count] = RExC_npar; SvIV_set(sv_dat, SvIVX(sv_dat) + 1); } } else { (void)SvUPGRADE(sv_dat,SVt_PVNV); sv_setpvn(sv_dat, (char *)&(RExC_npar), sizeof(I32)); SvIOK_on(sv_dat); SvIV_set(sv_dat, 1); } #ifdef DEBUGGING /* Yes this does cause a memory leak in debugging Perls */ if (!av_store(RExC_paren_name_list, RExC_npar, SvREFCNT_inc(svname))) SvREFCNT_dec(svname); #endif /*sv_dump(sv_dat);*/ } nextchar(pRExC_state); paren = 1; goto capturing_parens; } RExC_seen |= REG_SEEN_LOOKBEHIND; RExC_in_lookbehind++; RExC_parse++; case '=': /* (?=...) */ RExC_seen_zerolen++; break; case '!': /* (?!...) */ RExC_seen_zerolen++; if (*RExC_parse == ')') { ret=reg_node(pRExC_state, OPFAIL); nextchar(pRExC_state); return ret; } break; case '|': /* (?|...) */ /* branch reset, behave like a (?:...) except that buffers in alternations share the same numbers */ paren = ':'; after_freeze = freeze_paren = RExC_npar; break; case ':': /* (?:...) */ case '>': /* (?>...) */ break; case '$': /* (?$...) */ case '@': /* (?@...) */ vFAIL2("Sequence (?%c...) not implemented", (int)paren); break; case '#': /* (?#...) */ while (*RExC_parse && *RExC_parse != ')') RExC_parse++; if (*RExC_parse != ')') FAIL("Sequence (?#... not terminated"); nextchar(pRExC_state); *flagp = TRYAGAIN; return NULL; case '0' : /* (?0) */ case 'R' : /* (?R) */ if (*RExC_parse != ')') FAIL("Sequence (?R) not terminated"); ret = reg_node(pRExC_state, GOSTART); *flagp |= POSTPONED; nextchar(pRExC_state); return ret; /*notreached*/ { /* named and numeric backreferences */ I32 num; case '&': /* (?&NAME) */ parse_start = RExC_parse - 1; named_recursion: { SV *sv_dat = reg_scan_name(pRExC_state, SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA); num = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0; } goto gen_recurse_regop; assert(0); /* NOT REACHED */ case '+': if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) { RExC_parse++; vFAIL("Illegal pattern"); } goto parse_recursion; /* NOT REACHED*/ case '-': /* (?-1) */ if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) { RExC_parse--; /* rewind to let it be handled later */ goto parse_flags; } /*FALLTHROUGH */ case '1': case '2': case '3': case '4': /* (?1) */ case '5': case '6': case '7': case '8': case '9': RExC_parse--; parse_recursion: num = atoi(RExC_parse); parse_start = RExC_parse - 1; /* MJD */ if (*RExC_parse == '-') RExC_parse++; while (isDIGIT(*RExC_parse)) RExC_parse++; if (*RExC_parse!=')') vFAIL("Expecting close bracket"); gen_recurse_regop: if ( paren == '-' ) { /* Diagram of capture buffer numbering. Top line is the normal capture buffer numbers Bottom line is the negative indexing as from the X (the (?-2)) + 1 2 3 4 5 X 6 7 /(a(x)y)(a(b(c(?-2)d)e)f)(g(h))/ - 5 4 3 2 1 X x x */ num = RExC_npar + num; if (num < 1) { RExC_parse++; vFAIL("Reference to nonexistent group"); } } else if ( paren == '+' ) { num = RExC_npar + num - 1; } ret = reganode(pRExC_state, GOSUB, num); if (!SIZE_ONLY) { if (num > (I32)RExC_rx->nparens) { RExC_parse++; vFAIL("Reference to nonexistent group"); } ARG2L_SET( ret, RExC_recurse_count++); RExC_emit++; DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log, "Recurse #%"UVuf" to %"IVdf"\n", (UV)ARG(ret), (IV)ARG2L(ret))); } else { RExC_size++; } RExC_seen |= REG_SEEN_RECURSE; Set_Node_Length(ret, 1 + regarglen[OP(ret)]); /* MJD */ Set_Node_Offset(ret, parse_start); /* MJD */ *flagp |= POSTPONED; nextchar(pRExC_state); return ret; } /* named and numeric backreferences */ assert(0); /* NOT REACHED */ case '?': /* (??...) */ is_logical = 1; if (*RExC_parse != '{') { RExC_parse++; vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart); /*NOTREACHED*/ } *flagp |= POSTPONED; paren = *RExC_parse++; /* FALL THROUGH */ case '{': /* (?{...}) */ { U32 n = 0; struct reg_code_block *cb; RExC_seen_zerolen++; if ( !pRExC_state->num_code_blocks || pRExC_state->code_index >= pRExC_state->num_code_blocks || pRExC_state->code_blocks[pRExC_state->code_index].start != (STRLEN)((RExC_parse -3 - (is_logical ? 1 : 0)) - RExC_start) ) { if (RExC_pm_flags & PMf_USE_RE_EVAL) FAIL("panic: Sequence (?{...}): no code block found\n"); FAIL("Eval-group not allowed at runtime, use re 'eval'"); } /* this is a pre-compiled code block (?{...}) */ cb = &pRExC_state->code_blocks[pRExC_state->code_index]; RExC_parse = RExC_start + cb->end; if (!SIZE_ONLY) { OP *o = cb->block; if (cb->src_regex) { n = add_data(pRExC_state, 2, "rl"); RExC_rxi->data->data[n] = (void*)SvREFCNT_inc((SV*)cb->src_regex); RExC_rxi->data->data[n+1] = (void*)o; } else { n = add_data(pRExC_state, 1, (RExC_pm_flags & PMf_HAS_CV) ? "L" : "l"); RExC_rxi->data->data[n] = (void*)o; } } pRExC_state->code_index++; nextchar(pRExC_state); if (is_logical) { regnode *eval; ret = reg_node(pRExC_state, LOGICAL); eval = reganode(pRExC_state, EVAL, n); if (!SIZE_ONLY) { ret->flags = 2; /* for later propagation into (??{}) return value */ eval->flags = (U8) (RExC_flags & RXf_PMf_COMPILETIME); } REGTAIL(pRExC_state, ret, eval); /* deal with the length of this later - MJD */ return ret; } ret = reganode(pRExC_state, EVAL, n); Set_Node_Length(ret, RExC_parse - parse_start + 1); Set_Node_Offset(ret, parse_start); return ret; } case '(': /* (?(?{...})...) and (?(?=...)...) */ { int is_define= 0; if (RExC_parse[0] == '?') { /* (?(?...)) */ if (RExC_parse[1] == '=' || RExC_parse[1] == '!' || RExC_parse[1] == '<' || RExC_parse[1] == '{') { /* Lookahead or eval. */ I32 flag; ret = reg_node(pRExC_state, LOGICAL); if (!SIZE_ONLY) ret->flags = 1; REGTAIL(pRExC_state, ret, reg(pRExC_state, 1, &flag,depth+1)); goto insert_if; } } else if ( RExC_parse[0] == '<' /* (?()...) */ || RExC_parse[0] == '\'' ) /* (?('NAME')...) */ { char ch = RExC_parse[0] == '<' ? '>' : '\''; char *name_start= RExC_parse++; U32 num = 0; SV *sv_dat=reg_scan_name(pRExC_state, SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA); if (RExC_parse == name_start || *RExC_parse != ch) vFAIL2("Sequence (?(%c... not terminated", (ch == '>' ? '<' : ch)); RExC_parse++; if (!SIZE_ONLY) { num = add_data( pRExC_state, 1, "S" ); RExC_rxi->data->data[num]=(void*)sv_dat; SvREFCNT_inc_simple_void(sv_dat); } ret = reganode(pRExC_state,NGROUPP,num); goto insert_if_check_paren; } else if (RExC_parse[0] == 'D' && RExC_parse[1] == 'E' && RExC_parse[2] == 'F' && RExC_parse[3] == 'I' && RExC_parse[4] == 'N' && RExC_parse[5] == 'E') { ret = reganode(pRExC_state,DEFINEP,0); RExC_parse +=6 ; is_define = 1; goto insert_if_check_paren; } else if (RExC_parse[0] == 'R') { RExC_parse++; parno = 0; if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) { parno = atoi(RExC_parse++); while (isDIGIT(*RExC_parse)) RExC_parse++; } else if (RExC_parse[0] == '&') { SV *sv_dat; RExC_parse++; sv_dat = reg_scan_name(pRExC_state, SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA); parno = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0; } ret = reganode(pRExC_state,INSUBP,parno); goto insert_if_check_paren; } else if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) { /* (?(1)...) */ char c; parno = atoi(RExC_parse++); while (isDIGIT(*RExC_parse)) RExC_parse++; ret = reganode(pRExC_state, GROUPP, parno); insert_if_check_paren: if ((c = *nextchar(pRExC_state)) != ')') vFAIL("Switch condition not recognized"); insert_if: REGTAIL(pRExC_state, ret, reganode(pRExC_state, IFTHEN, 0)); br = regbranch(pRExC_state, &flags, 1,depth+1); if (br == NULL) br = reganode(pRExC_state, LONGJMP, 0); else REGTAIL(pRExC_state, br, reganode(pRExC_state, LONGJMP, 0)); c = *nextchar(pRExC_state); if (flags&HASWIDTH) *flagp |= HASWIDTH; if (c == '|') { if (is_define) vFAIL("(?(DEFINE)....) does not allow branches"); lastbr = reganode(pRExC_state, IFTHEN, 0); /* Fake one for optimizer. */ regbranch(pRExC_state, &flags, 1,depth+1); REGTAIL(pRExC_state, ret, lastbr); if (flags&HASWIDTH) *flagp |= HASWIDTH; c = *nextchar(pRExC_state); } else lastbr = NULL; if (c != ')') vFAIL("Switch (?(condition)... contains too many branches"); ender = reg_node(pRExC_state, TAIL); REGTAIL(pRExC_state, br, ender); if (lastbr) { REGTAIL(pRExC_state, lastbr, ender); REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender); } else REGTAIL(pRExC_state, ret, ender); RExC_size++; /* XXX WHY do we need this?!! For large programs it seems to be required but I can't figure out why. -- dmq*/ return ret; } else { vFAIL2("Unknown switch condition (?(%.2s", RExC_parse); } } case 0: RExC_parse--; /* for vFAIL to print correctly */ vFAIL("Sequence (? incomplete"); break; case DEFAULT_PAT_MOD: /* Use default flags with the exceptions that follow */ has_use_defaults = TRUE; STD_PMMOD_FLAGS_CLEAR(&RExC_flags); set_regex_charset(&RExC_flags, (RExC_utf8 || RExC_uni_semantics) ? REGEX_UNICODE_CHARSET : REGEX_DEPENDS_CHARSET); goto parse_flags; default: --RExC_parse; parse_flags: /* (?i) */ { U32 posflags = 0, negflags = 0; U32 *flagsp = &posflags; char has_charset_modifier = '\0'; regex_charset cs = get_regex_charset(RExC_flags); if (cs == REGEX_DEPENDS_CHARSET && (RExC_utf8 || RExC_uni_semantics)) { cs = REGEX_UNICODE_CHARSET; } while (*RExC_parse) { /* && strchr("iogcmsx", *RExC_parse) */ /* (?g), (?gc) and (?o) are useless here and must be globally applied -- japhy */ switch (*RExC_parse) { CASE_STD_PMMOD_FLAGS_PARSE_SET(flagsp); case LOCALE_PAT_MOD: if (has_charset_modifier) { goto excess_modifier; } else if (flagsp == &negflags) { goto neg_modifier; } cs = REGEX_LOCALE_CHARSET; has_charset_modifier = LOCALE_PAT_MOD; RExC_contains_locale = 1; break; case UNICODE_PAT_MOD: if (has_charset_modifier) { goto excess_modifier; } else if (flagsp == &negflags) { goto neg_modifier; } cs = REGEX_UNICODE_CHARSET; has_charset_modifier = UNICODE_PAT_MOD; break; case ASCII_RESTRICT_PAT_MOD: if (flagsp == &negflags) { goto neg_modifier; } if (has_charset_modifier) { if (cs != REGEX_ASCII_RESTRICTED_CHARSET) { goto excess_modifier; } /* Doubled modifier implies more restricted */ cs = REGEX_ASCII_MORE_RESTRICTED_CHARSET; } else { cs = REGEX_ASCII_RESTRICTED_CHARSET; } has_charset_modifier = ASCII_RESTRICT_PAT_MOD; break; case DEPENDS_PAT_MOD: if (has_use_defaults) { goto fail_modifiers; } else if (flagsp == &negflags) { goto neg_modifier; } else if (has_charset_modifier) { goto excess_modifier; } /* The dual charset means unicode semantics if the * pattern (or target, not known until runtime) are * utf8, or something in the pattern indicates unicode * semantics */ cs = (RExC_utf8 || RExC_uni_semantics) ? REGEX_UNICODE_CHARSET : REGEX_DEPENDS_CHARSET; has_charset_modifier = DEPENDS_PAT_MOD; break; excess_modifier: RExC_parse++; if (has_charset_modifier == ASCII_RESTRICT_PAT_MOD) { vFAIL2("Regexp modifier \"%c\" may appear a maximum of twice", ASCII_RESTRICT_PAT_MOD); } else if (has_charset_modifier == *(RExC_parse - 1)) { vFAIL2("Regexp modifier \"%c\" may not appear twice", *(RExC_parse - 1)); } else { vFAIL3("Regexp modifiers \"%c\" and \"%c\" are mutually exclusive", has_charset_modifier, *(RExC_parse - 1)); } /*NOTREACHED*/ neg_modifier: RExC_parse++; vFAIL2("Regexp modifier \"%c\" may not appear after the \"-\"", *(RExC_parse - 1)); /*NOTREACHED*/ case ONCE_PAT_MOD: /* 'o' */ case GLOBAL_PAT_MOD: /* 'g' */ if (SIZE_ONLY && ckWARN(WARN_REGEXP)) { const I32 wflagbit = *RExC_parse == 'o' ? WASTED_O : WASTED_G; if (! (wastedflags & wflagbit) ) { wastedflags |= wflagbit; vWARN5( RExC_parse + 1, "Useless (%s%c) - %suse /%c modifier", flagsp == &negflags ? "?-" : "?", *RExC_parse, flagsp == &negflags ? "don't " : "", *RExC_parse ); } } break; case CONTINUE_PAT_MOD: /* 'c' */ if (SIZE_ONLY && ckWARN(WARN_REGEXP)) { if (! (wastedflags & WASTED_C) ) { wastedflags |= WASTED_GC; vWARN3( RExC_parse + 1, "Useless (%sc) - %suse /gc modifier", flagsp == &negflags ? "?-" : "?", flagsp == &negflags ? "don't " : "" ); } } break; case KEEPCOPY_PAT_MOD: /* 'p' */ if (flagsp == &negflags) { if (SIZE_ONLY) ckWARNreg(RExC_parse + 1,"Useless use of (?-p)"); } else { *flagsp |= RXf_PMf_KEEPCOPY; } break; case '-': /* A flag is a default iff it is following a minus, so * if there is a minus, it means will be trying to * re-specify a default which is an error */ if (has_use_defaults || flagsp == &negflags) { fail_modifiers: RExC_parse++; vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart); /*NOTREACHED*/ } flagsp = &negflags; wastedflags = 0; /* reset so (?g-c) warns twice */ break; case ':': paren = ':'; /*FALLTHROUGH*/ case ')': RExC_flags |= posflags; RExC_flags &= ~negflags; set_regex_charset(&RExC_flags, cs); if (paren != ':') { oregflags |= posflags; oregflags &= ~negflags; set_regex_charset(&oregflags, cs); } nextchar(pRExC_state); if (paren != ':') { *flagp = TRYAGAIN; return NULL; } else { ret = NULL; goto parse_rest; } /*NOTREACHED*/ default: RExC_parse++; vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart); /*NOTREACHED*/ } ++RExC_parse; } }} /* one for the default block, one for the switch */ } else { /* (...) */ capturing_parens: parno = RExC_npar; RExC_npar++; ret = reganode(pRExC_state, OPEN, parno); if (!SIZE_ONLY ){ if (!RExC_nestroot) RExC_nestroot = parno; if (RExC_seen & REG_SEEN_RECURSE && !RExC_open_parens[parno-1]) { DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log, "Setting open paren #%"IVdf" to %d\n", (IV)parno, REG_NODE_NUM(ret))); RExC_open_parens[parno-1]= ret; } } Set_Node_Length(ret, 1); /* MJD */ Set_Node_Offset(ret, RExC_parse); /* MJD */ is_open = 1; } } else /* ! paren */ ret = NULL; parse_rest: /* Pick up the branches, linking them together. */ parse_start = RExC_parse; /* MJD */ br = regbranch(pRExC_state, &flags, 1,depth+1); /* branch_len = (paren != 0); */ if (br == NULL) return(NULL); if (*RExC_parse == '|') { if (!SIZE_ONLY && RExC_extralen) { reginsert(pRExC_state, BRANCHJ, br, depth+1); } else { /* MJD */ reginsert(pRExC_state, BRANCH, br, depth+1); Set_Node_Length(br, paren != 0); Set_Node_Offset_To_R(br-RExC_emit_start, parse_start-RExC_start); } have_branch = 1; if (SIZE_ONLY) RExC_extralen += 1; /* For BRANCHJ-BRANCH. */ } else if (paren == ':') { *flagp |= flags&SIMPLE; } if (is_open) { /* Starts with OPEN. */ REGTAIL(pRExC_state, ret, br); /* OPEN -> first. */ } else if (paren != '?') /* Not Conditional */ ret = br; *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED); lastbr = br; while (*RExC_parse == '|') { if (!SIZE_ONLY && RExC_extralen) { ender = reganode(pRExC_state, LONGJMP,0); REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender); /* Append to the previous. */ } if (SIZE_ONLY) RExC_extralen += 2; /* Account for LONGJMP. */ nextchar(pRExC_state); if (freeze_paren) { if (RExC_npar > after_freeze) after_freeze = RExC_npar; RExC_npar = freeze_paren; } br = regbranch(pRExC_state, &flags, 0, depth+1); if (br == NULL) return(NULL); REGTAIL(pRExC_state, lastbr, br); /* BRANCH -> BRANCH. */ lastbr = br; *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED); } if (have_branch || paren != ':') { /* Make a closing node, and hook it on the end. */ switch (paren) { case ':': ender = reg_node(pRExC_state, TAIL); break; case 1: ender = reganode(pRExC_state, CLOSE, parno); if (!SIZE_ONLY && RExC_seen & REG_SEEN_RECURSE) { DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log, "Setting close paren #%"IVdf" to %d\n", (IV)parno, REG_NODE_NUM(ender))); RExC_close_parens[parno-1]= ender; if (RExC_nestroot == parno) RExC_nestroot = 0; } Set_Node_Offset(ender,RExC_parse+1); /* MJD */ Set_Node_Length(ender,1); /* MJD */ break; case '<': case ',': case '=': case '!': *flagp &= ~HASWIDTH; /* FALL THROUGH */ case '>': ender = reg_node(pRExC_state, SUCCEED); break; case 0: ender = reg_node(pRExC_state, END); if (!SIZE_ONLY) { assert(!RExC_opend); /* there can only be one! */ RExC_opend = ender; } break; } DEBUG_PARSE_r(if (!SIZE_ONLY) { SV * const mysv_val1=sv_newmortal(); SV * const mysv_val2=sv_newmortal(); DEBUG_PARSE_MSG("lsbr"); regprop(RExC_rx, mysv_val1, lastbr); regprop(RExC_rx, mysv_val2, ender); PerlIO_printf(Perl_debug_log, "~ tying lastbr %s (%"IVdf") to ender %s (%"IVdf") offset %"IVdf"\n", SvPV_nolen_const(mysv_val1), (IV)REG_NODE_NUM(lastbr), SvPV_nolen_const(mysv_val2), (IV)REG_NODE_NUM(ender), (IV)(ender - lastbr) ); }); REGTAIL(pRExC_state, lastbr, ender); if (have_branch && !SIZE_ONLY) { char is_nothing= 1; if (depth==1) RExC_seen |= REG_TOP_LEVEL_BRANCHES; /* Hook the tails of the branches to the closing node. */ for (br = ret; br; br = regnext(br)) { const U8 op = PL_regkind[OP(br)]; if (op == BRANCH) { REGTAIL_STUDY(pRExC_state, NEXTOPER(br), ender); if (OP(NEXTOPER(br)) != NOTHING || regnext(NEXTOPER(br)) != ender) is_nothing= 0; } else if (op == BRANCHJ) { REGTAIL_STUDY(pRExC_state, NEXTOPER(NEXTOPER(br)), ender); /* for now we always disable this optimisation * / if (OP(NEXTOPER(NEXTOPER(br))) != NOTHING || regnext(NEXTOPER(NEXTOPER(br))) != ender) */ is_nothing= 0; } } if (is_nothing) { br= PL_regkind[OP(ret)] != BRANCH ? regnext(ret) : ret; DEBUG_PARSE_r(if (!SIZE_ONLY) { SV * const mysv_val1=sv_newmortal(); SV * const mysv_val2=sv_newmortal(); DEBUG_PARSE_MSG("NADA"); regprop(RExC_rx, mysv_val1, ret); regprop(RExC_rx, mysv_val2, ender); PerlIO_printf(Perl_debug_log, "~ converting ret %s (%"IVdf") to ender %s (%"IVdf") offset %"IVdf"\n", SvPV_nolen_const(mysv_val1), (IV)REG_NODE_NUM(ret), SvPV_nolen_const(mysv_val2), (IV)REG_NODE_NUM(ender), (IV)(ender - ret) ); }); OP(br)= NOTHING; if (OP(ender) == TAIL) { NEXT_OFF(br)= 0; RExC_emit= br + 1; } else { regnode *opt; for ( opt= br + 1; opt < ender ; opt++ ) OP(opt)= OPTIMIZED; NEXT_OFF(br)= ender - br; } } } } { const char *p; static const char parens[] = "=!<,>"; if (paren && (p = strchr(parens, paren))) { U8 node = ((p - parens) % 2) ? UNLESSM : IFMATCH; int flag = (p - parens) > 1; if (paren == '>') node = SUSPEND, flag = 0; reginsert(pRExC_state, node,ret, depth+1); Set_Node_Cur_Length(ret); Set_Node_Offset(ret, parse_start + 1); ret->flags = flag; REGTAIL_STUDY(pRExC_state, ret, reg_node(pRExC_state, TAIL)); } } /* Check for proper termination. */ if (paren) { RExC_flags = oregflags; if (RExC_parse >= RExC_end || *nextchar(pRExC_state) != ')') { RExC_parse = oregcomp_parse; vFAIL("Unmatched ("); } } else if (!paren && RExC_parse < RExC_end) { if (*RExC_parse == ')') { RExC_parse++; vFAIL("Unmatched )"); } else FAIL("Junk on end of regexp"); /* "Can't happen". */ assert(0); /* NOTREACHED */ } if (RExC_in_lookbehind) { RExC_in_lookbehind--; } if (after_freeze > RExC_npar) RExC_npar = after_freeze; return(ret); } /* - regbranch - one alternative of an | operator * * Implements the concatenation operator. */ STATIC regnode * S_regbranch(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, I32 first, U32 depth) { dVAR; regnode *ret; regnode *chain = NULL; regnode *latest; I32 flags = 0, c = 0; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGBRANCH; DEBUG_PARSE("brnc"); if (first) ret = NULL; else { if (!SIZE_ONLY && RExC_extralen) ret = reganode(pRExC_state, BRANCHJ,0); else { ret = reg_node(pRExC_state, BRANCH); Set_Node_Length(ret, 1); } } if (!first && SIZE_ONLY) RExC_extralen += 1; /* BRANCHJ */ *flagp = WORST; /* Tentatively. */ RExC_parse--; nextchar(pRExC_state); while (RExC_parse < RExC_end && *RExC_parse != '|' && *RExC_parse != ')') { flags &= ~TRYAGAIN; latest = regpiece(pRExC_state, &flags,depth+1); if (latest == NULL) { if (flags & TRYAGAIN) continue; return(NULL); } else if (ret == NULL) ret = latest; *flagp |= flags&(HASWIDTH|POSTPONED); if (chain == NULL) /* First piece. */ *flagp |= flags&SPSTART; else { RExC_naughty++; REGTAIL(pRExC_state, chain, latest); } chain = latest; c++; } if (chain == NULL) { /* Loop ran zero times. */ chain = reg_node(pRExC_state, NOTHING); if (ret == NULL) ret = chain; } if (c == 1) { *flagp |= flags&SIMPLE; } return ret; } /* - regpiece - something followed by possible [*+?] * * Note that the branching code sequences used for ? and the general cases * of * and + are somewhat optimized: they use the same NOTHING node as * both the endmarker for their branch list and the body of the last branch. * It might seem that this node could be dispensed with entirely, but the * endmarker role is not redundant. */ STATIC regnode * S_regpiece(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth) { dVAR; regnode *ret; char op; char *next; I32 flags; const char * const origparse = RExC_parse; I32 min; I32 max = REG_INFTY; #ifdef RE_TRACK_PATTERN_OFFSETS char *parse_start; #endif const char *maxpos = NULL; /* Save the original in case we change the emitted regop to a FAIL. */ regnode * const orig_emit = RExC_emit; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGPIECE; DEBUG_PARSE("piec"); ret = regatom(pRExC_state, &flags,depth+1); if (ret == NULL) { if (flags & TRYAGAIN) *flagp |= TRYAGAIN; return(NULL); } op = *RExC_parse; if (op == '{' && regcurly(RExC_parse)) { maxpos = NULL; #ifdef RE_TRACK_PATTERN_OFFSETS parse_start = RExC_parse; /* MJD */ #endif next = RExC_parse + 1; while (isDIGIT(*next) || *next == ',') { if (*next == ',') { if (maxpos) break; else maxpos = next; } next++; } if (*next == '}') { /* got one */ if (!maxpos) maxpos = next; RExC_parse++; min = atoi(RExC_parse); if (*maxpos == ',') maxpos++; else maxpos = RExC_parse; max = atoi(maxpos); if (!max && *maxpos != '0') max = REG_INFTY; /* meaning "infinity" */ else if (max >= REG_INFTY) vFAIL2("Quantifier in {,} bigger than %d", REG_INFTY - 1); RExC_parse = next; nextchar(pRExC_state); if (max < min) { /* If can't match, warn and optimize to fail unconditionally */ if (SIZE_ONLY) { ckWARNreg(RExC_parse, "Quantifier {n,m} with n > m can't match"); /* We can't back off the size because we have to reserve * enough space for all the things we are about to throw * away, but we can shrink it by the ammount we are about * to re-use here */ RExC_size = PREVOPER(RExC_size) - regarglen[(U8)OPFAIL]; } else { RExC_emit = orig_emit; } ret = reg_node(pRExC_state, OPFAIL); return ret; } do_curly: if ((flags&SIMPLE)) { RExC_naughty += 2 + RExC_naughty / 2; reginsert(pRExC_state, CURLY, ret, depth+1); Set_Node_Offset(ret, parse_start+1); /* MJD */ Set_Node_Cur_Length(ret); } else { regnode * const w = reg_node(pRExC_state, WHILEM); w->flags = 0; REGTAIL(pRExC_state, ret, w); if (!SIZE_ONLY && RExC_extralen) { reginsert(pRExC_state, LONGJMP,ret, depth+1); reginsert(pRExC_state, NOTHING,ret, depth+1); NEXT_OFF(ret) = 3; /* Go over LONGJMP. */ } reginsert(pRExC_state, CURLYX,ret, depth+1); /* MJD hk */ Set_Node_Offset(ret, parse_start+1); Set_Node_Length(ret, op == '{' ? (RExC_parse - parse_start) : 1); if (!SIZE_ONLY && RExC_extralen) NEXT_OFF(ret) = 3; /* Go over NOTHING to LONGJMP. */ REGTAIL(pRExC_state, ret, reg_node(pRExC_state, NOTHING)); if (SIZE_ONLY) RExC_whilem_seen++, RExC_extralen += 3; RExC_naughty += 4 + RExC_naughty; /* compound interest */ } ret->flags = 0; if (min > 0) *flagp = WORST; if (max > 0) *flagp |= HASWIDTH; if (!SIZE_ONLY) { ARG1_SET(ret, (U16)min); ARG2_SET(ret, (U16)max); } goto nest_check; } } if (!ISMULT1(op)) { *flagp = flags; return(ret); } #if 0 /* Now runtime fix should be reliable. */ /* if this is reinstated, don't forget to put this back into perldiag: =item Regexp *+ operand could be empty at {#} in regex m/%s/ (F) The part of the regexp subject to either the * or + quantifier could match an empty string. The {#} shows in the regular expression about where the problem was discovered. */ if (!(flags&HASWIDTH) && op != '?') vFAIL("Regexp *+ operand could be empty"); #endif #ifdef RE_TRACK_PATTERN_OFFSETS parse_start = RExC_parse; #endif nextchar(pRExC_state); *flagp = (op != '+') ? (WORST|SPSTART|HASWIDTH) : (WORST|HASWIDTH); if (op == '*' && (flags&SIMPLE)) { reginsert(pRExC_state, STAR, ret, depth+1); ret->flags = 0; RExC_naughty += 4; } else if (op == '*') { min = 0; goto do_curly; } else if (op == '+' && (flags&SIMPLE)) { reginsert(pRExC_state, PLUS, ret, depth+1); ret->flags = 0; RExC_naughty += 3; } else if (op == '+') { min = 1; goto do_curly; } else if (op == '?') { min = 0; max = 1; goto do_curly; } nest_check: if (!SIZE_ONLY && !(flags&(HASWIDTH|POSTPONED)) && max > REG_INFTY/3) { ckWARN3reg(RExC_parse, "%.*s matches null string many times", (int)(RExC_parse >= origparse ? RExC_parse - origparse : 0), origparse); } if (RExC_parse < RExC_end && *RExC_parse == '?') { nextchar(pRExC_state); reginsert(pRExC_state, MINMOD, ret, depth+1); REGTAIL(pRExC_state, ret, ret + NODE_STEP_REGNODE); } #ifndef REG_ALLOW_MINMOD_SUSPEND else #endif if (RExC_parse < RExC_end && *RExC_parse == '+') { regnode *ender; nextchar(pRExC_state); ender = reg_node(pRExC_state, SUCCEED); REGTAIL(pRExC_state, ret, ender); reginsert(pRExC_state, SUSPEND, ret, depth+1); ret->flags = 0; ender = reg_node(pRExC_state, TAIL); REGTAIL(pRExC_state, ret, ender); /*ret= ender;*/ } if (RExC_parse < RExC_end && ISMULT2(RExC_parse)) { RExC_parse++; vFAIL("Nested quantifiers"); } return(ret); } STATIC bool S_grok_bslash_N(pTHX_ RExC_state_t *pRExC_state, regnode** node_p, UV *valuep, I32 *flagp, U32 depth, bool in_char_class) { /* This is expected to be called by a parser routine that has recognized '\N' and needs to handle the rest. RExC_parse is expected to point at the first char following the N at the time of the call. On successful return, RExC_parse has been updated to point to just after the sequence identified by this routine, and <*flagp> has been updated. The \N may be inside (indicated by the boolean ) or outside a character class. \N may begin either a named sequence, or if outside a character class, mean to match a non-newline. For non single-quoted regexes, the tokenizer has attempted to decide which, and in the case of a named sequence, converted it into one of the forms: \N{} (if the sequence is null), or \N{U+c1.c2...}, where c1... are the characters in the sequence. For single-quoted regexes, the tokenizer passes the \N sequence through unchanged; this code will not attempt to determine this nor expand those, instead raising a syntax error. The net effect is that if the beginning of the passed-in pattern isn't '{U+' or there is no '}', it signals that this \N occurrence means to match a non-newline. Only the \N{U+...} form should occur in a character class, for the same reason that '.' inside a character class means to just match a period: it just doesn't make sense. The function raises an error (via vFAIL), and doesn't return for various syntax errors. Otherwise it returns TRUE and sets or on success; it returns FALSE otherwise. If is non-null, it means the caller can accept an input sequence consisting of a just a single code point; <*valuep> is set to that value if the input is such. If is non-null it signifies that the caller can accept any other legal sequence (i.e., one that isn't just a single code point). <*node_p> is set as follows: 1) \N means not-a-NL: points to a newly created REG_ANY node; 2) \N{}: points to a new NOTHING node; 3) otherwise: points to a new EXACT node containing the resolved string. Note that FALSE is returned for single code point sequences if is null. */ char * endbrace; /* '}' following the name */ char* p; char *endchar; /* Points to '.' or '}' ending cur char in the input stream */ bool has_multiple_chars; /* true if the input stream contains a sequence of more than one character */ GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_GROK_BSLASH_N; GET_RE_DEBUG_FLAGS; assert(cBOOL(node_p) ^ cBOOL(valuep)); /* Exactly one should be set */ /* The [^\n] meaning of \N ignores spaces and comments under the /x * modifier. The other meaning does not */ p = (RExC_flags & RXf_PMf_EXTENDED) ? regwhite( pRExC_state, RExC_parse ) : RExC_parse; /* Disambiguate between \N meaning a named character versus \N meaning * [^\n]. The former is assumed when it can't be the latter. */ if (*p != '{' || regcurly(p)) { RExC_parse = p; if (! node_p) { /* no bare \N in a charclass */ if (in_char_class) { vFAIL("\\N in a character class must be a named character: \\N{...}"); } return FALSE; } nextchar(pRExC_state); *node_p = reg_node(pRExC_state, REG_ANY); *flagp |= HASWIDTH|SIMPLE; RExC_naughty++; RExC_parse--; Set_Node_Length(*node_p, 1); /* MJD */ return TRUE; } /* Here, we have decided it should be a named character or sequence */ /* The test above made sure that the next real character is a '{', but * under the /x modifier, it could be separated by space (or a comment and * \n) and this is not allowed (for consistency with \x{...} and the * tokenizer handling of \N{NAME}). */ if (*RExC_parse != '{') { vFAIL("Missing braces on \\N{}"); } RExC_parse++; /* Skip past the '{' */ if (! (endbrace = strchr(RExC_parse, '}')) /* no trailing brace */ || ! (endbrace == RExC_parse /* nothing between the {} */ || (endbrace - RExC_parse >= 2 /* U+ (bad hex is checked below */ && strnEQ(RExC_parse, "U+", 2)))) /* for a better error msg) */ { if (endbrace) RExC_parse = endbrace; /* position msg's '<--HERE' */ vFAIL("\\N{NAME} must be resolved by the lexer"); } if (endbrace == RExC_parse) { /* empty: \N{} */ bool ret = TRUE; if (node_p) { *node_p = reg_node(pRExC_state,NOTHING); } else if (in_char_class) { if (SIZE_ONLY && in_char_class) { ckWARNreg(RExC_parse, "Ignoring zero length \\N{} in character class" ); } ret = FALSE; } else { return FALSE; } nextchar(pRExC_state); return ret; } RExC_uni_semantics = 1; /* Unicode named chars imply Unicode semantics */ RExC_parse += 2; /* Skip past the 'U+' */ endchar = RExC_parse + strcspn(RExC_parse, ".}"); /* Code points are separated by dots. If none, there is only one code * point, and is terminated by the brace */ has_multiple_chars = (endchar < endbrace); if (valuep && (! has_multiple_chars || in_char_class)) { /* We only pay attention to the first char of multichar strings being returned in char classes. I kinda wonder if this makes sense as it does change the behaviour from earlier versions, OTOH that behaviour was broken as well. XXX Solution is to recharacterize as [rest-of-class]|multi1|multi2... */ STRLEN length_of_hex = (STRLEN)(endchar - RExC_parse); I32 grok_hex_flags = PERL_SCAN_ALLOW_UNDERSCORES | PERL_SCAN_DISALLOW_PREFIX | (SIZE_ONLY ? PERL_SCAN_SILENT_ILLDIGIT : 0); *valuep = grok_hex(RExC_parse, &length_of_hex, &grok_hex_flags, NULL); /* The tokenizer should have guaranteed validity, but it's possible to * bypass it by using single quoting, so check */ if (length_of_hex == 0 || length_of_hex != (STRLEN)(endchar - RExC_parse) ) { RExC_parse += length_of_hex; /* Includes all the valid */ RExC_parse += (RExC_orig_utf8) /* point to after 1st invalid */ ? UTF8SKIP(RExC_parse) : 1; /* Guard against malformed utf8 */ if (RExC_parse >= endchar) { RExC_parse = endchar; } vFAIL("Invalid hexadecimal number in \\N{U+...}"); } if (in_char_class && has_multiple_chars) { ckWARNreg(endchar, "Using just the first character returned by \\N{} in character class"); } RExC_parse = endbrace + 1; } else if (! node_p || ! has_multiple_chars) { /* Here, the input is legal, but not according to the caller's * options. We fail without advancing the parse, so that the * caller can try again */ RExC_parse = p; return FALSE; } else { /* What is done here is to convert this to a sub-pattern of the form * (?:\x{char1}\x{char2}...) * and then call reg recursively. That way, it retains its atomicness, * while not having to worry about special handling that some code * points may have. toke.c has converted the original Unicode values * to native, so that we can just pass on the hex values unchanged. We * do have to set a flag to keep recoding from happening in the * recursion */ SV * substitute_parse = newSVpvn_flags("?:", 2, SVf_UTF8|SVs_TEMP); STRLEN len; char *orig_end = RExC_end; I32 flags; while (RExC_parse < endbrace) { /* Convert to notation the rest of the code understands */ sv_catpv(substitute_parse, "\\x{"); sv_catpvn(substitute_parse, RExC_parse, endchar - RExC_parse); sv_catpv(substitute_parse, "}"); /* Point to the beginning of the next character in the sequence. */ RExC_parse = endchar + 1; endchar = RExC_parse + strcspn(RExC_parse, ".}"); } sv_catpv(substitute_parse, ")"); RExC_parse = SvPV(substitute_parse, len); /* Don't allow empty number */ if (len < 8) { vFAIL("Invalid hexadecimal number in \\N{U+...}"); } RExC_end = RExC_parse + len; /* The values are Unicode, and therefore not subject to recoding */ RExC_override_recoding = 1; *node_p = reg(pRExC_state, 1, &flags, depth+1); *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED); RExC_parse = endbrace; RExC_end = orig_end; RExC_override_recoding = 0; nextchar(pRExC_state); } return TRUE; } /* * reg_recode * * It returns the code point in utf8 for the value in *encp. * value: a code value in the source encoding * encp: a pointer to an Encode object * * If the result from Encode is not a single character, * it returns U+FFFD (Replacement character) and sets *encp to NULL. */ STATIC UV S_reg_recode(pTHX_ const char value, SV **encp) { STRLEN numlen = 1; SV * const sv = newSVpvn_flags(&value, numlen, SVs_TEMP); const char * const s = *encp ? sv_recode_to_utf8(sv, *encp) : SvPVX(sv); const STRLEN newlen = SvCUR(sv); UV uv = UNICODE_REPLACEMENT; PERL_ARGS_ASSERT_REG_RECODE; if (newlen) uv = SvUTF8(sv) ? utf8n_to_uvchr((U8*)s, newlen, &numlen, UTF8_ALLOW_DEFAULT) : *(U8*)s; if (!newlen || numlen != newlen) { uv = UNICODE_REPLACEMENT; *encp = NULL; } return uv; } PERL_STATIC_INLINE U8 S_compute_EXACTish(pTHX_ RExC_state_t *pRExC_state) { U8 op; PERL_ARGS_ASSERT_COMPUTE_EXACTISH; if (! FOLD) { return EXACT; } op = get_regex_charset(RExC_flags); if (op >= REGEX_ASCII_RESTRICTED_CHARSET) { op--; /* /a is same as /u, and map /aa's offset to what /a's would have been, so there is no hole */ } return op + EXACTF; } PERL_STATIC_INLINE void S_alloc_maybe_populate_EXACT(pTHX_ RExC_state_t *pRExC_state, regnode *node, I32* flagp, STRLEN len, UV code_point) { /* This knows the details about sizing an EXACTish node, setting flags for * it (by setting <*flagp>, and potentially populating it with a single * character. * * If (the length in bytes) is non-zero, this function assumes that * the node has already been populated, and just does the sizing. In this * case should be the final code point that has already been * placed into the node. This value will be ignored except that under some * circumstances <*flagp> is set based on it. * * If is zero, the function assumes that the node is to contain only * the single character given by and calculates what * should be. In pass 1, it sizes the node appropriately. In pass 2, it * additionally will populate the node's STRING with , if * is 0. In both cases <*flagp> is appropriately set * * It knows that under FOLD, UTF characters and the Latin Sharp S must be * folded (the latter only when the rules indicate it can match 'ss') */ bool len_passed_in = cBOOL(len != 0); U8 character[UTF8_MAXBYTES_CASE+1]; PERL_ARGS_ASSERT_ALLOC_MAYBE_POPULATE_EXACT; if (! len_passed_in) { if (UTF) { if (FOLD) { to_uni_fold(NATIVE_TO_UNI(code_point), character, &len); } else { uvchr_to_utf8( character, code_point); len = UTF8SKIP(character); } } else if (! FOLD || code_point != LATIN_SMALL_LETTER_SHARP_S || ASCII_FOLD_RESTRICTED || ! AT_LEAST_UNI_SEMANTICS) { *character = (U8) code_point; len = 1; } else { *character = 's'; *(character + 1) = 's'; len = 2; } } if (SIZE_ONLY) { RExC_size += STR_SZ(len); } else { RExC_emit += STR_SZ(len); STR_LEN(node) = len; if (! len_passed_in) { Copy((char *) character, STRING(node), len, char); } } *flagp |= HASWIDTH; /* A single character node is SIMPLE, except for the special-cased SHARP S * under /di. */ if ((len == 1 || (UTF && len == UNISKIP(code_point))) && (code_point != LATIN_SMALL_LETTER_SHARP_S || ! FOLD || ! DEPENDS_SEMANTICS)) { *flagp |= SIMPLE; } } /* - regatom - the lowest level Try to identify anything special at the start of the pattern. If there is, then handle it as required. This may involve generating a single regop, such as for an assertion; or it may involve recursing, such as to handle a () structure. If the string doesn't start with something special then we gobble up as much literal text as we can. Once we have been able to handle whatever type of thing started the sequence, we return. Note: we have to be careful with escapes, as they can be both literal and special, and in the case of \10 and friends, context determines which. A summary of the code structure is: switch (first_byte) { cases for each special: handle this special; break; case '\\': switch (2nd byte) { cases for each unambiguous special: handle this special; break; cases for each ambigous special/literal: disambiguate; if (special) handle here else goto defchar; default: // unambiguously literal: goto defchar; } default: // is a literal char // FALL THROUGH defchar: create EXACTish node for literal; while (more input and node isn't full) { switch (input_byte) { cases for each special; make sure parse pointer is set so that the next call to regatom will see this special first goto loopdone; // EXACTish node terminated by prev. char default: append char to EXACTISH node; } get next input byte; } loopdone: } return the generated node; Specifically there are two separate switches for handling escape sequences, with the one for handling literal escapes requiring a dummy entry for all of the special escapes that are actually handled by the other. */ STATIC regnode * S_regatom(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth) { dVAR; regnode *ret = NULL; I32 flags; char *parse_start = RExC_parse; U8 op; GET_RE_DEBUG_FLAGS_DECL; DEBUG_PARSE("atom"); *flagp = WORST; /* Tentatively. */ PERL_ARGS_ASSERT_REGATOM; tryagain: switch ((U8)*RExC_parse) { case '^': RExC_seen_zerolen++; nextchar(pRExC_state); if (RExC_flags & RXf_PMf_MULTILINE) ret = reg_node(pRExC_state, MBOL); else if (RExC_flags & RXf_PMf_SINGLELINE) ret = reg_node(pRExC_state, SBOL); else ret = reg_node(pRExC_state, BOL); Set_Node_Length(ret, 1); /* MJD */ break; case '$': nextchar(pRExC_state); if (*RExC_parse) RExC_seen_zerolen++; if (RExC_flags & RXf_PMf_MULTILINE) ret = reg_node(pRExC_state, MEOL); else if (RExC_flags & RXf_PMf_SINGLELINE) ret = reg_node(pRExC_state, SEOL); else ret = reg_node(pRExC_state, EOL); Set_Node_Length(ret, 1); /* MJD */ break; case '.': nextchar(pRExC_state); if (RExC_flags & RXf_PMf_SINGLELINE) ret = reg_node(pRExC_state, SANY); else ret = reg_node(pRExC_state, REG_ANY); *flagp |= HASWIDTH|SIMPLE; RExC_naughty++; Set_Node_Length(ret, 1); /* MJD */ break; case '[': { char * const oregcomp_parse = ++RExC_parse; ret = regclass(pRExC_state, flagp,depth+1); if (*RExC_parse != ']') { RExC_parse = oregcomp_parse; vFAIL("Unmatched ["); } nextchar(pRExC_state); Set_Node_Length(ret, RExC_parse - oregcomp_parse + 1); /* MJD */ break; } case '(': nextchar(pRExC_state); ret = reg(pRExC_state, 1, &flags,depth+1); if (ret == NULL) { if (flags & TRYAGAIN) { if (RExC_parse == RExC_end) { /* Make parent create an empty node if needed. */ *flagp |= TRYAGAIN; return(NULL); } goto tryagain; } return(NULL); } *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED); break; case '|': case ')': if (flags & TRYAGAIN) { *flagp |= TRYAGAIN; return NULL; } vFAIL("Internal urp"); /* Supposed to be caught earlier. */ break; case '?': case '+': case '*': RExC_parse++; vFAIL("Quantifier follows nothing"); break; case '\\': /* Special Escapes This switch handles escape sequences that resolve to some kind of special regop and not to literal text. Escape sequnces that resolve to literal text are handled below in the switch marked "Literal Escapes". Every entry in this switch *must* have a corresponding entry in the literal escape switch. However, the opposite is not required, as the default for this switch is to jump to the literal text handling code. */ switch ((U8)*++RExC_parse) { /* Special Escapes */ case 'A': RExC_seen_zerolen++; ret = reg_node(pRExC_state, SBOL); *flagp |= SIMPLE; goto finish_meta_pat; case 'G': ret = reg_node(pRExC_state, GPOS); RExC_seen |= REG_SEEN_GPOS; *flagp |= SIMPLE; goto finish_meta_pat; case 'K': RExC_seen_zerolen++; ret = reg_node(pRExC_state, KEEPS); *flagp |= SIMPLE; /* XXX:dmq : disabling in-place substitution seems to * be necessary here to avoid cases of memory corruption, as * with: C<$_="x" x 80; s/x\K/y/> -- rgs */ RExC_seen |= REG_SEEN_LOOKBEHIND; goto finish_meta_pat; case 'Z': ret = reg_node(pRExC_state, SEOL); *flagp |= SIMPLE; RExC_seen_zerolen++; /* Do not optimize RE away */ goto finish_meta_pat; case 'z': ret = reg_node(pRExC_state, EOS); *flagp |= SIMPLE; RExC_seen_zerolen++; /* Do not optimize RE away */ goto finish_meta_pat; case 'C': ret = reg_node(pRExC_state, CANY); RExC_seen |= REG_SEEN_CANY; *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'X': ret = reg_node(pRExC_state, CLUMP); *flagp |= HASWIDTH; goto finish_meta_pat; case 'w': op = ALNUM + get_regex_charset(RExC_flags); if (op > ALNUMA) { /* /aa is same as /a */ op = ALNUMA; } ret = reg_node(pRExC_state, op); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'W': op = NALNUM + get_regex_charset(RExC_flags); if (op > NALNUMA) { /* /aa is same as /a */ op = NALNUMA; } ret = reg_node(pRExC_state, op); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'b': RExC_seen_zerolen++; RExC_seen |= REG_SEEN_LOOKBEHIND; op = BOUND + get_regex_charset(RExC_flags); if (op > BOUNDA) { /* /aa is same as /a */ op = BOUNDA; } ret = reg_node(pRExC_state, op); FLAGS(ret) = get_regex_charset(RExC_flags); *flagp |= SIMPLE; goto finish_meta_pat; case 'B': RExC_seen_zerolen++; RExC_seen |= REG_SEEN_LOOKBEHIND; op = NBOUND + get_regex_charset(RExC_flags); if (op > NBOUNDA) { /* /aa is same as /a */ op = NBOUNDA; } ret = reg_node(pRExC_state, op); FLAGS(ret) = get_regex_charset(RExC_flags); *flagp |= SIMPLE; goto finish_meta_pat; case 's': op = SPACE + get_regex_charset(RExC_flags); if (op > SPACEA) { /* /aa is same as /a */ op = SPACEA; } ret = reg_node(pRExC_state, op); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'S': op = NSPACE + get_regex_charset(RExC_flags); if (op > NSPACEA) { /* /aa is same as /a */ op = NSPACEA; } ret = reg_node(pRExC_state, op); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'D': op = NDIGIT; goto join_D_and_d; case 'd': op = DIGIT; join_D_and_d: { U8 offset = get_regex_charset(RExC_flags); if (offset == REGEX_UNICODE_CHARSET) { offset = REGEX_DEPENDS_CHARSET; } else if (offset == REGEX_ASCII_MORE_RESTRICTED_CHARSET) { offset = REGEX_ASCII_RESTRICTED_CHARSET; } op += offset; } ret = reg_node(pRExC_state, op); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'R': ret = reg_node(pRExC_state, LNBREAK); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'h': ret = reg_node(pRExC_state, HORIZWS); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'H': ret = reg_node(pRExC_state, NHORIZWS); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'v': ret = reg_node(pRExC_state, VERTWS); *flagp |= HASWIDTH|SIMPLE; goto finish_meta_pat; case 'V': ret = reg_node(pRExC_state, NVERTWS); *flagp |= HASWIDTH|SIMPLE; finish_meta_pat: nextchar(pRExC_state); Set_Node_Length(ret, 2); /* MJD */ break; case 'p': case 'P': { char* const oldregxend = RExC_end; #ifdef DEBUGGING char* parse_start = RExC_parse - 2; #endif if (RExC_parse[1] == '{') { /* a lovely hack--pretend we saw [\pX] instead */ RExC_end = strchr(RExC_parse, '}'); if (!RExC_end) { const U8 c = (U8)*RExC_parse; RExC_parse += 2; RExC_end = oldregxend; vFAIL2("Missing right brace on \\%c{}", c); } RExC_end++; } else { RExC_end = RExC_parse + 2; if (RExC_end > oldregxend) RExC_end = oldregxend; } RExC_parse--; ret = regclass(pRExC_state, flagp,depth+1); RExC_end = oldregxend; RExC_parse--; Set_Node_Offset(ret, parse_start + 2); Set_Node_Cur_Length(ret); nextchar(pRExC_state); } break; case 'N': /* Handle \N and \N{NAME} with multiple code points here and not * below because it can be multicharacter. join_exact() will join * them up later on. Also this makes sure that things like * /\N{BLAH}+/ and \N{BLAH} being multi char Just Happen. dmq. * The options to the grok function call causes it to fail if the * sequence is just a single code point. We then go treat it as * just another character in the current EXACT node, and hence it * gets uniform treatment with all the other characters. The * special treatment for quantifiers is not needed for such single * character sequences */ ++RExC_parse; if (! grok_bslash_N(pRExC_state, &ret, NULL, flagp, depth, FALSE)) { RExC_parse--; goto defchar; } break; case 'k': /* Handle \k and \k'NAME' */ parse_named_seq: { char ch= RExC_parse[1]; if (ch != '<' && ch != '\'' && ch != '{') { RExC_parse++; vFAIL2("Sequence %.2s... not terminated",parse_start); } else { /* this pretty much dupes the code for (?P=...) in reg(), if you change this make sure you change that */ char* name_start = (RExC_parse += 2); U32 num = 0; SV *sv_dat = reg_scan_name(pRExC_state, SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA); ch= (ch == '<') ? '>' : (ch == '{') ? '}' : '\''; if (RExC_parse == name_start || *RExC_parse != ch) vFAIL2("Sequence %.3s... not terminated",parse_start); if (!SIZE_ONLY) { num = add_data( pRExC_state, 1, "S" ); RExC_rxi->data->data[num]=(void*)sv_dat; SvREFCNT_inc_simple_void(sv_dat); } RExC_sawback = 1; ret = reganode(pRExC_state, ((! FOLD) ? NREF : (ASCII_FOLD_RESTRICTED) ? NREFFA : (AT_LEAST_UNI_SEMANTICS) ? NREFFU : (LOC) ? NREFFL : NREFF), num); *flagp |= HASWIDTH; /* override incorrect value set in reganode MJD */ Set_Node_Offset(ret, parse_start+1); Set_Node_Cur_Length(ret); /* MJD */ nextchar(pRExC_state); } break; } case 'g': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': { I32 num; bool isg = *RExC_parse == 'g'; bool isrel = 0; bool hasbrace = 0; if (isg) { RExC_parse++; if (*RExC_parse == '{') { RExC_parse++; hasbrace = 1; } if (*RExC_parse == '-') { RExC_parse++; isrel = 1; } if (hasbrace && !isDIGIT(*RExC_parse)) { if (isrel) RExC_parse--; RExC_parse -= 2; goto parse_named_seq; } } num = atoi(RExC_parse); if (isg && num == 0) vFAIL("Reference to invalid group 0"); if (isrel) { num = RExC_npar - num; if (num < 1) vFAIL("Reference to nonexistent or unclosed group"); } if (!isg && num > 9 && num >= RExC_npar) /* Probably a character specified in octal, e.g. \35 */ goto defchar; else { char * const parse_start = RExC_parse - 1; /* MJD */ while (isDIGIT(*RExC_parse)) RExC_parse++; if (parse_start == RExC_parse - 1) vFAIL("Unterminated \\g... pattern"); if (hasbrace) { if (*RExC_parse != '}') vFAIL("Unterminated \\g{...} pattern"); RExC_parse++; } if (!SIZE_ONLY) { if (num > (I32)RExC_rx->nparens) vFAIL("Reference to nonexistent group"); } RExC_sawback = 1; ret = reganode(pRExC_state, ((! FOLD) ? REF : (ASCII_FOLD_RESTRICTED) ? REFFA : (AT_LEAST_UNI_SEMANTICS) ? REFFU : (LOC) ? REFFL : REFF), num); *flagp |= HASWIDTH; /* override incorrect value set in reganode MJD */ Set_Node_Offset(ret, parse_start+1); Set_Node_Cur_Length(ret); /* MJD */ RExC_parse--; nextchar(pRExC_state); } } break; case '\0': if (RExC_parse >= RExC_end) FAIL("Trailing \\"); /* FALL THROUGH */ default: /* Do not generate "unrecognized" warnings here, we fall back into the quick-grab loop below */ parse_start--; goto defchar; } break; case '#': if (RExC_flags & RXf_PMf_EXTENDED) { if ( reg_skipcomment( pRExC_state ) ) goto tryagain; } /* FALL THROUGH */ default: parse_start = RExC_parse - 1; RExC_parse++; defchar: { STRLEN len = 0; UV ender; char *p; char *s; #define MAX_NODE_STRING_SIZE 127 char foldbuf[MAX_NODE_STRING_SIZE+UTF8_MAXBYTES_CASE]; char *s0; U8 upper_parse = MAX_NODE_STRING_SIZE; STRLEN foldlen; U8 node_type; bool next_is_quantifier; char * oldp = NULL; /* If a folding node contains only code points that don't * participate in folds, it can be changed into an EXACT node, * which allows the optimizer more things to look for */ bool maybe_exact; ender = 0; node_type = compute_EXACTish(pRExC_state); ret = reg_node(pRExC_state, node_type); /* In pass1, folded, we use a temporary buffer instead of the * actual node, as the node doesn't exist yet */ s = (SIZE_ONLY && FOLD) ? foldbuf : STRING(ret); s0 = s; reparse: /* We do the EXACTFish to EXACT node only if folding, and not if in * locale, as whether a character folds or not isn't known until * runtime */ maybe_exact = FOLD && ! LOC; /* XXX The node can hold up to 255 bytes, yet this only goes to * 127. I (khw) do not know why. Keeping it somewhat less than * 255 allows us to not have to worry about overflow due to * converting to utf8 and fold expansion, but that value is * 255-UTF8_MAXBYTES_CASE. join_exact() may join adjacent nodes * split up by this limit into a single one using the real max of * 255. Even at 127, this breaks under rare circumstances. If * folding, we do not want to split a node at a character that is a * non-final in a multi-char fold, as an input string could just * happen to want to match across the node boundary. The join * would solve that problem if the join actually happens. But a * series of more than two nodes in a row each of 127 would cause * the first join to succeed to get to 254, but then there wouldn't * be room for the next one, which could at be one of those split * multi-char folds. I don't know of any fool-proof solution. One * could back off to end with only a code point that isn't such a * non-final, but it is possible for there not to be any in the * entire node. */ for (p = RExC_parse - 1; len < upper_parse && p < RExC_end; len++) { oldp = p; if (RExC_flags & RXf_PMf_EXTENDED) p = regwhite( pRExC_state, p ); switch ((U8)*p) { case '^': case '$': case '.': case '[': case '(': case ')': case '|': goto loopdone; case '\\': /* Literal Escapes Switch This switch is meant to handle escape sequences that resolve to a literal character. Every escape sequence that represents something else, like an assertion or a char class, is handled in the switch marked 'Special Escapes' above in this routine, but also has an entry here as anything that isn't explicitly mentioned here will be treated as an unescaped equivalent literal. */ switch ((U8)*++p) { /* These are all the special escapes. */ case 'A': /* Start assertion */ case 'b': case 'B': /* Word-boundary assertion*/ case 'C': /* Single char !DANGEROUS! */ case 'd': case 'D': /* digit class */ case 'g': case 'G': /* generic-backref, pos assertion */ case 'h': case 'H': /* HORIZWS */ case 'k': case 'K': /* named backref, keep marker */ case 'p': case 'P': /* Unicode property */ case 'R': /* LNBREAK */ case 's': case 'S': /* space class */ case 'v': case 'V': /* VERTWS */ case 'w': case 'W': /* word class */ case 'X': /* eXtended Unicode "combining character sequence" */ case 'z': case 'Z': /* End of line/string assertion */ --p; goto loopdone; /* Anything after here is an escape that resolves to a literal. (Except digits, which may or may not) */ case 'n': ender = '\n'; p++; break; case 'N': /* Handle a single-code point named character. */ /* The options cause it to fail if a multiple code * point sequence. Handle those in the switch() above * */ RExC_parse = p + 1; if (! grok_bslash_N(pRExC_state, NULL, &ender, flagp, depth, FALSE)) { RExC_parse = p = oldp; goto loopdone; } p = RExC_parse; if (ender > 0xff) { REQUIRE_UTF8; } break; case 'r': ender = '\r'; p++; break; case 't': ender = '\t'; p++; break; case 'f': ender = '\f'; p++; break; case 'e': ender = ASCII_TO_NATIVE('\033'); p++; break; case 'a': ender = ASCII_TO_NATIVE('\007'); p++; break; case 'o': { STRLEN brace_len = len; UV result; const char* error_msg; bool valid = grok_bslash_o(p, &result, &brace_len, &error_msg, 1); p += brace_len; if (! valid) { RExC_parse = p; /* going to die anyway; point to exact spot of failure */ vFAIL(error_msg); } else { ender = result; } if (PL_encoding && ender < 0x100) { goto recode_encoding; } if (ender > 0xff) { REQUIRE_UTF8; } break; } case 'x': { STRLEN brace_len = len; UV result; const char* error_msg; bool valid = grok_bslash_x(p, &result, &brace_len, &error_msg, 1); p += brace_len; if (! valid) { RExC_parse = p; /* going to die anyway; point to exact spot of failure */ vFAIL(error_msg); } else { ender = result; } if (PL_encoding && ender < 0x100) { goto recode_encoding; } if (ender > 0xff) { REQUIRE_UTF8; } break; } case 'c': p++; ender = grok_bslash_c(*p++, UTF, SIZE_ONLY); break; case '0': case '1': case '2': case '3':case '4': case '5': case '6': case '7': if (*p == '0' || (isDIGIT(p[1]) && atoi(p) >= RExC_npar)) { I32 flags = PERL_SCAN_SILENT_ILLDIGIT; STRLEN numlen = 3; ender = grok_oct(p, &numlen, &flags, NULL); if (ender > 0xff) { REQUIRE_UTF8; } p += numlen; } else { --p; goto loopdone; } if (PL_encoding && ender < 0x100) goto recode_encoding; break; recode_encoding: if (! RExC_override_recoding) { SV* enc = PL_encoding; ender = reg_recode((const char)(U8)ender, &enc); if (!enc && SIZE_ONLY) ckWARNreg(p, "Invalid escape in the specified encoding"); REQUIRE_UTF8; } break; case '\0': if (p >= RExC_end) FAIL("Trailing \\"); /* FALL THROUGH */ default: if (!SIZE_ONLY&& isALNUMC(*p)) { ckWARN2reg(p + 1, "Unrecognized escape \\%.1s passed through", p); } goto normal_default; } break; case '{': /* Currently we don't warn when the lbrace is at the start * of a construct. This catches it in the middle of a * literal string, or when its the first thing after * something like "\b" */ if (! SIZE_ONLY && (len || (p > RExC_start && isALPHA_A(*(p -1))))) { ckWARNregdep(p + 1, "Unescaped left brace in regex is deprecated, passed through"); } /*FALLTHROUGH*/ default: normal_default: if (UTF8_IS_START(*p) && UTF) { STRLEN numlen; ender = utf8n_to_uvchr((U8*)p, RExC_end - p, &numlen, UTF8_ALLOW_DEFAULT); p += numlen; } else ender = (U8) *p++; break; } /* End of switch on the literal */ /* Here, have looked at the literal character and * contains its ordinal,

points to the character after it */ if ( RExC_flags & RXf_PMf_EXTENDED) p = regwhite( pRExC_state, p ); /* If the next thing is a quantifier, it applies to this * character only, which means that this character has to be in * its own node and can't just be appended to the string in an * existing node, so if there are already other characters in * the node, close the node with just them, and set up to do * this character again next time through, when it will be the * only thing in its new node */ if ((next_is_quantifier = (p < RExC_end && ISMULT2(p))) && len) { p = oldp; goto loopdone; } if (FOLD) { if (UTF /* See comments for join_exact() as to why we fold * this non-UTF at compile time */ || (node_type == EXACTFU && ender == LATIN_SMALL_LETTER_SHARP_S)) { /* Prime the casefolded buffer. Locale rules, which * apply only to code points < 256, aren't known until * execution, so for them, just output the original * character using utf8. If we start to fold non-UTF * patterns, be sure to update join_exact() */ if (LOC && ender < 256) { if (UNI_IS_INVARIANT(ender)) { *s = (U8) ender; foldlen = 1; } else { *s = UTF8_TWO_BYTE_HI(ender); *(s + 1) = UTF8_TWO_BYTE_LO(ender); foldlen = 2; } } else { UV folded = _to_uni_fold_flags( ender, (U8 *) s, &foldlen, FOLD_FLAGS_FULL | ((LOC) ? FOLD_FLAGS_LOCALE : (ASCII_FOLD_RESTRICTED) ? FOLD_FLAGS_NOMIX_ASCII : 0) ); /* If this node only contains non-folding code * points so far, see if this new one is also * non-folding */ if (maybe_exact) { if (folded != ender) { maybe_exact = FALSE; } else { /* Here the fold is the original; we have * to check further to see if anything * folds to it */ if (! PL_utf8_foldable) { SV* swash = swash_init("utf8", "_Perl_Any_Folds", &PL_sv_undef, 1, 0); PL_utf8_foldable = _get_swash_invlist(swash); SvREFCNT_dec(swash); } if (_invlist_contains_cp(PL_utf8_foldable, ender)) { maybe_exact = FALSE; } } } ender = folded; } s += foldlen; /* The loop increments each time, as all but this * path (and the one just below for UTF) through it add * a single byte to the EXACTish node. But this one * has changed len to be the correct final value, so * subtract one to cancel out the increment that * follows */ len += foldlen - 1; } else { *(s++) = ender; maybe_exact &= ! IS_IN_SOME_FOLD_L1(ender); } } else if (UTF) { const STRLEN unilen = reguni(pRExC_state, ender, s); if (unilen > 0) { s += unilen; len += unilen; } /* See comment just above for - 1 */ len--; } else { REGC((char)ender, s++); } if (next_is_quantifier) { /* Here, the next input is a quantifier, and to get here, * the current character is the only one in the node. * Also, here doesn't include the final byte for this * character */ len++; goto loopdone; } } /* End of loop through literal characters */ /* Here we have either exhausted the input or ran out of room in * the node. (If we encountered a character that can't be in the * node, transfer is made directly to , and so we * wouldn't have fallen off the end of the loop.) In the latter * case, we artificially have to split the node into two, because * we just don't have enough space to hold everything. This * creates a problem if the final character participates in a * multi-character fold in the non-final position, as a match that * should have occurred won't, due to the way nodes are matched, * and our artificial boundary. So back off until we find a non- * problematic character -- one that isn't at the beginning or * middle of such a fold. (Either it doesn't participate in any * folds, or appears only in the final position of all the folds it * does participate in.) A better solution with far fewer false * positives, and that would fill the nodes more completely, would * be to actually have available all the multi-character folds to * test against, and to back-off only far enough to be sure that * this node isn't ending with a partial one. is set * further below (if we need to reparse the node) to include just * up through that final non-problematic character that this code * identifies, so when it is set to less than the full node, we can * skip the rest of this */ if (FOLD && p < RExC_end && upper_parse == MAX_NODE_STRING_SIZE) { const STRLEN full_len = len; assert(len >= MAX_NODE_STRING_SIZE); /* Here, points to the final byte of the final character. * Look backwards through the string until find a non- * problematic character */ if (! UTF) { /* These two have no multi-char folds to non-UTF characters */ if (ASCII_FOLD_RESTRICTED || LOC) { goto loopdone; } while (--s >= s0 && IS_NON_FINAL_FOLD(*s)) { } len = s - s0 + 1; } else { if (! PL_NonL1NonFinalFold) { PL_NonL1NonFinalFold = _new_invlist_C_array( NonL1_Perl_Non_Final_Folds_invlist); } /* Point to the first byte of the final character */ s = (char *) utf8_hop((U8 *) s, -1); while (s >= s0) { /* Search backwards until find non-problematic char */ if (UTF8_IS_INVARIANT(*s)) { /* There are no ascii characters that participate * in multi-char folds under /aa. In EBCDIC, the * non-ascii invariants are all control characters, * so don't ever participate in any folds. */ if (ASCII_FOLD_RESTRICTED || ! IS_NON_FINAL_FOLD(*s)) { break; } } else if (UTF8_IS_DOWNGRADEABLE_START(*s)) { /* No Latin1 characters participate in multi-char * folds under /l */ if (LOC || ! IS_NON_FINAL_FOLD(TWO_BYTE_UTF8_TO_UNI( *s, *(s+1)))) { break; } } else if (! _invlist_contains_cp( PL_NonL1NonFinalFold, valid_utf8_to_uvchr((U8 *) s, NULL))) { break; } /* Here, the current character is problematic in that * it does occur in the non-final position of some * fold, so try the character before it, but have to * special case the very first byte in the string, so * we don't read outside the string */ s = (s == s0) ? s -1 : (char *) utf8_hop((U8 *) s, -1); } /* End of loop backwards through the string */ /* If there were only problematic characters in the string, * will point to before s0, in which case the length * should be 0, otherwise include the length of the * non-problematic character just found */ len = (s < s0) ? 0 : s - s0 + UTF8SKIP(s); } /* Here, have found the final character, if any, that is * non-problematic as far as ending the node without splitting * it across a potential multi-char fold. contains the * number of bytes in the node up-to and including that * character, or is 0 if there is no such character, meaning * the whole node contains only problematic characters. In * this case, give up and just take the node as-is. We can't * do any better */ if (len == 0) { len = full_len; } else { /* Here, the node does contain some characters that aren't * problematic. If one such is the final character in the * node, we are done */ if (len == full_len) { goto loopdone; } else if (len + ((UTF) ? UTF8SKIP(s) : 1) == full_len) { /* If the final character is problematic, but the * penultimate is not, back-off that last character to * later start a new node with it */ p = oldp; goto loopdone; } /* Here, the final non-problematic character is earlier * in the input than the penultimate character. What we do * is reparse from the beginning, going up only as far as * this final ok one, thus guaranteeing that the node ends * in an acceptable character. The reason we reparse is * that we know how far in the character is, but we don't * know how to correlate its position with the input parse. * An alternate implementation would be to build that * correlation as we go along during the original parse, * but that would entail extra work for every node, whereas * this code gets executed only when the string is too * large for the node, and the final two characters are * problematic, an infrequent occurrence. Yet another * possible strategy would be to save the tail of the * string, and the next time regatom is called, initialize * with that. The problem with this is that unless you * back off one more character, you won't be guaranteed * regatom will get called again, unless regbranch, * regpiece ... are also changed. If you do back off that * extra character, so that there is input guaranteed to * force calling regatom, you can't handle the case where * just the first character in the node is acceptable. I * (khw) decided to try this method which doesn't have that * pitfall; if performance issues are found, we can do a * combination of the current approach plus that one */ upper_parse = len; len = 0; s = s0; goto reparse; } } /* End of verifying node ends with an appropriate char */ loopdone: /* Jumped to when encounters something that shouldn't be in the node */ /* If 'maybe_exact' is still set here, means there are no * code points in the node that participate in folds */ if (FOLD && maybe_exact) { OP(ret) = EXACT; } /* I (khw) don't know if you can get here with zero length, but the * old code handled this situation by creating a zero-length EXACT * node. Might as well be NOTHING instead */ if (len == 0) { OP(ret) = NOTHING; } else{ alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, len, ender); } RExC_parse = p - 1; Set_Node_Cur_Length(ret); /* MJD */ nextchar(pRExC_state); { /* len is STRLEN which is unsigned, need to copy to signed */ IV iv = len; if (iv < 0) vFAIL("Internal disaster"); } } /* End of label 'defchar:' */ break; } /* End of giant switch on input character */ return(ret); } STATIC char * S_regwhite( RExC_state_t *pRExC_state, char *p ) { const char *e = RExC_end; PERL_ARGS_ASSERT_REGWHITE; while (p < e) { if (isSPACE(*p)) ++p; else if (*p == '#') { bool ended = 0; do { if (*p++ == '\n') { ended = 1; break; } } while (p < e); if (!ended) RExC_seen |= REG_SEEN_RUN_ON_COMMENT; } else break; } return p; } /* Parse POSIX character classes: [[:foo:]], [[=foo=]], [[.foo.]]. Character classes ([:foo:]) can also be negated ([:^foo:]). Returns a named class id (ANYOF_XXX) if successful, -1 otherwise. Equivalence classes ([=foo=]) and composites ([.foo.]) are parsed, but trigger failures because they are currently unimplemented. */ #define POSIXCC_DONE(c) ((c) == ':') #define POSIXCC_NOTYET(c) ((c) == '=' || (c) == '.') #define POSIXCC(c) (POSIXCC_DONE(c) || POSIXCC_NOTYET(c)) STATIC I32 S_regpposixcc(pTHX_ RExC_state_t *pRExC_state, I32 value) { dVAR; I32 namedclass = OOB_NAMEDCLASS; PERL_ARGS_ASSERT_REGPPOSIXCC; if (value == '[' && RExC_parse + 1 < RExC_end && /* I smell either [: or [= or [. -- POSIX has been here, right? */ POSIXCC(UCHARAT(RExC_parse))) { const char c = UCHARAT(RExC_parse); char* const s = RExC_parse++; while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != c) RExC_parse++; if (RExC_parse == RExC_end) /* Grandfather lone [:, [=, [. */ RExC_parse = s; else { const char* const t = RExC_parse++; /* skip over the c */ assert(*t == c); if (UCHARAT(RExC_parse) == ']') { const char *posixcc = s + 1; RExC_parse++; /* skip over the ending ] */ if (*s == ':') { const I32 complement = *posixcc == '^' ? *posixcc++ : 0; const I32 skip = t - posixcc; /* Initially switch on the length of the name. */ switch (skip) { case 4: if (memEQ(posixcc, "word", 4)) /* this is not POSIX, this is the Perl \w */ namedclass = ANYOF_WORDCHAR; break; case 5: /* Names all of length 5. */ /* alnum alpha ascii blank cntrl digit graph lower print punct space upper */ /* Offset 4 gives the best switch position. */ switch (posixcc[4]) { case 'a': if (memEQ(posixcc, "alph", 4)) /* alpha */ namedclass = ANYOF_ALPHA; break; case 'e': if (memEQ(posixcc, "spac", 4)) /* space */ namedclass = ANYOF_PSXSPC; break; case 'h': if (memEQ(posixcc, "grap", 4)) /* graph */ namedclass = ANYOF_GRAPH; break; case 'i': if (memEQ(posixcc, "asci", 4)) /* ascii */ namedclass = ANYOF_ASCII; break; case 'k': if (memEQ(posixcc, "blan", 4)) /* blank */ namedclass = ANYOF_BLANK; break; case 'l': if (memEQ(posixcc, "cntr", 4)) /* cntrl */ namedclass = ANYOF_CNTRL; break; case 'm': if (memEQ(posixcc, "alnu", 4)) /* alnum */ namedclass = ANYOF_ALNUMC; break; case 'r': if (memEQ(posixcc, "lowe", 4)) /* lower */ namedclass = ANYOF_LOWER; else if (memEQ(posixcc, "uppe", 4)) /* upper */ namedclass = ANYOF_UPPER; break; case 't': if (memEQ(posixcc, "digi", 4)) /* digit */ namedclass = ANYOF_DIGIT; else if (memEQ(posixcc, "prin", 4)) /* print */ namedclass = ANYOF_PRINT; else if (memEQ(posixcc, "punc", 4)) /* punct */ namedclass = ANYOF_PUNCT; break; } break; case 6: if (memEQ(posixcc, "xdigit", 6)) namedclass = ANYOF_XDIGIT; break; } if (namedclass == OOB_NAMEDCLASS) Simple_vFAIL3("POSIX class [:%.*s:] unknown", t - s - 1, s + 1); /* The #defines are structured so each complement is +1 to * the normal one */ if (complement) { namedclass++; } assert (posixcc[skip] == ':'); assert (posixcc[skip+1] == ']'); } else if (!SIZE_ONLY) { /* [[=foo=]] and [[.foo.]] are still future. */ /* adjust RExC_parse so the warning shows after the class closes */ while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse) != ']') RExC_parse++; Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c); } } else { /* Maternal grandfather: * "[:" ending in ":" but not in ":]" */ RExC_parse = s; } } } return namedclass; } STATIC void S_checkposixcc(pTHX_ RExC_state_t *pRExC_state) { dVAR; PERL_ARGS_ASSERT_CHECKPOSIXCC; if (POSIXCC(UCHARAT(RExC_parse))) { const char *s = RExC_parse; const char c = *s++; while (isALNUM(*s)) s++; if (*s && c == *s && s[1] == ']') { ckWARN3reg(s+2, "POSIX syntax [%c %c] belongs inside character classes", c, c); /* [[=foo=]] and [[.foo.]] are still future. */ if (POSIXCC_NOTYET(c)) { /* adjust RExC_parse so the error shows after the class closes */ while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse++) != ']') NOOP; Simple_vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c); } } } } /* Generate the code to add a full posix character to the bracketed * character class given by . ( is needed only under locale rules) * destlist is the inversion list for non-locale rules that this class is * to be added to * sourcelist is the ASCII-range inversion list to add under /a rules * Xsourcelist is the full Unicode range list to use otherwise. */ #define DO_POSIX(node, class, destlist, sourcelist, Xsourcelist) \ if (LOC) { \ SV* scratch_list = NULL; \ \ /* Set this class in the node for runtime matching */ \ ANYOF_CLASS_SET(node, class); \ \ /* For above Latin1 code points, we use the full Unicode range */ \ _invlist_intersection(PL_AboveLatin1, \ Xsourcelist, \ &scratch_list); \ /* And set the output to it, adding instead if there already is an \ * output. Checking if is NULL first saves an extra \ * clone. Its reference count will be decremented at the next \ * union, etc, or if this is the only instance, at the end of the \ * routine */ \ if (! destlist) { \ destlist = scratch_list; \ } \ else { \ _invlist_union(destlist, scratch_list, &destlist); \ SvREFCNT_dec(scratch_list); \ } \ } \ else { \ /* For non-locale, just add it to any existing list */ \ _invlist_union(destlist, \ (AT_LEAST_ASCII_RESTRICTED) \ ? sourcelist \ : Xsourcelist, \ &destlist); \ } /* Like DO_POSIX, but matches the complement of and . */ #define DO_N_POSIX(node, class, destlist, sourcelist, Xsourcelist) \ if (LOC) { \ SV* scratch_list = NULL; \ ANYOF_CLASS_SET(node, class); \ _invlist_subtract(PL_AboveLatin1, Xsourcelist, &scratch_list); \ if (! destlist) { \ destlist = scratch_list; \ } \ else { \ _invlist_union(destlist, scratch_list, &destlist); \ SvREFCNT_dec(scratch_list); \ } \ } \ else { \ _invlist_union_complement_2nd(destlist, \ (AT_LEAST_ASCII_RESTRICTED) \ ? sourcelist \ : Xsourcelist, \ &destlist); \ /* Under /d, everything in the upper half of the Latin1 range \ * matches this complement */ \ if (DEPENDS_SEMANTICS) { \ ANYOF_FLAGS(node) |= ANYOF_NON_UTF8_LATIN1_ALL; \ } \ } /* Generate the code to add a posix character to the bracketed * character class given by . ( is needed only under locale rules) * destlist is the inversion list for non-locale rules that this class is * to be added to * sourcelist is the ASCII-range inversion list to add under /a rules * l1_sourcelist is the Latin1 range list to use otherwise. * Xpropertyname is the name to add to of the property to * specify the code points above Latin1 that will have to be * determined at run-time * run_time_list is a SV* that contains text names of properties that are to * be computed at run time. This concatenates * to it, appropriately * This is essentially DO_POSIX, but we know only the Latin1 values at compile * time */ #define DO_POSIX_LATIN1_ONLY_KNOWN(node, class, destlist, sourcelist, \ l1_sourcelist, Xpropertyname, run_time_list) \ /* First, resolve whether to use the ASCII-only list or the L1 \ * list */ \ DO_POSIX_LATIN1_ONLY_KNOWN_L1_RESOLVED(node, class, destlist, \ ((AT_LEAST_ASCII_RESTRICTED) ? sourcelist : l1_sourcelist),\ Xpropertyname, run_time_list) #define DO_POSIX_LATIN1_ONLY_KNOWN_L1_RESOLVED(node, class, destlist, sourcelist, \ Xpropertyname, run_time_list) \ /* If not /a matching, there are going to be code points we will have \ * to defer to runtime to look-up */ \ if (! AT_LEAST_ASCII_RESTRICTED) { \ Perl_sv_catpvf(aTHX_ run_time_list, "+utf8::%s\n", Xpropertyname); \ } \ if (LOC) { \ ANYOF_CLASS_SET(node, class); \ } \ else { \ _invlist_union(destlist, sourcelist, &destlist); \ } /* Like DO_POSIX_LATIN1_ONLY_KNOWN, but for the complement. A combination of * this and DO_N_POSIX. Sets only if it can; unchanged * otherwise */ #define DO_N_POSIX_LATIN1_ONLY_KNOWN(node, class, destlist, sourcelist, \ l1_sourcelist, Xpropertyname, run_time_list, matches_above_unicode) \ if (AT_LEAST_ASCII_RESTRICTED) { \ _invlist_union_complement_2nd(destlist, sourcelist, &destlist); \ } \ else { \ Perl_sv_catpvf(aTHX_ run_time_list, "!utf8::%s\n", Xpropertyname); \ matches_above_unicode = TRUE; \ if (LOC) { \ ANYOF_CLASS_SET(node, namedclass); \ } \ else { \ SV* scratch_list = NULL; \ _invlist_subtract(PL_Latin1, l1_sourcelist, &scratch_list); \ if (! destlist) { \ destlist = scratch_list; \ } \ else { \ _invlist_union(destlist, scratch_list, &destlist); \ SvREFCNT_dec(scratch_list); \ } \ if (DEPENDS_SEMANTICS) { \ ANYOF_FLAGS(node) |= ANYOF_NON_UTF8_LATIN1_ALL; \ } \ } \ } /* The names of properties whose definitions are not known at compile time are * stored in this SV, after a constant heading. So if the length has been * changed since initialization, then there is a run-time definition. */ #define HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION (SvCUR(listsv) != initial_listsv_len) /* This converts the named class defined in regcomp.h to its equivalent class * number defined in handy.h. */ #define namedclass_to_classnum(class) ((class) / 2) STATIC regnode * S_regclass(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth) { /* parse a bracketed class specification. Most of these will produce an ANYOF node; * but something like [a] will produce an EXACT node; [aA], an EXACTFish * node; [[:ascii:]], a POSIXA node; etc. It is more complex under /i with * multi-character folds: it will be rewritten following the paradigm of * this example, where the s are characters which fold to * multiple character sequences: * /[abc\x{multi-fold1}def\x{multi-fold2}ghi]/i * gets effectively rewritten as: * /(?:\x{multi-fold1}|\x{multi-fold2}|[abcdefghi]/i * reg() gets called (recursively) on the rewritten version, and this * function will return what it constructs. (Actually the s * aren't physically removed from the [abcdefghi], it's just that they are * ignored in the recursion by means of a a flag: * .) * * ANYOF nodes contain a bit map for the first 256 characters, with the * corresponding bit set if that character is in the list. For characters * above 255, a range list or swash is used. There are extra bits for \w, * etc. in locale ANYOFs, as what these match is not determinable at * compile time */ dVAR; UV nextvalue; UV prevvalue = OOB_UNICODE, save_prevvalue = OOB_UNICODE; IV range = 0; UV value = OOB_UNICODE, save_value = OOB_UNICODE; regnode *ret; STRLEN numlen; IV namedclass = OOB_NAMEDCLASS; char *rangebegin = NULL; bool need_class = 0; SV *listsv = NULL; STRLEN initial_listsv_len = 0; /* Kind of a kludge to see if it is more than just initialized. */ SV* properties = NULL; /* Code points that match \p{} \P{} */ SV* posixes = NULL; /* Code points that match classes like, [:word:], extended beyond the Latin1 range */ UV element_count = 0; /* Number of distinct elements in the class. Optimizations may be possible if this is tiny */ AV * multi_char_matches = NULL; /* Code points that fold to more than one character; used under /i */ UV n; /* Unicode properties are stored in a swash; this holds the current one * being parsed. If this swash is the only above-latin1 component of the * character class, an optimization is to pass it directly on to the * execution engine. Otherwise, it is set to NULL to indicate that there * are other things in the class that have to be dealt with at execution * time */ SV* swash = NULL; /* Code points that match \p{} \P{} */ /* Set if a component of this character class is user-defined; just passed * on to the engine */ bool has_user_defined_property = FALSE; /* inversion list of code points this node matches only when the target * string is in UTF-8. (Because is under /d) */ SV* depends_list = NULL; /* inversion list of code points this node matches. For much of the * function, it includes only those that match regardless of the utf8ness * of the target string */ SV* cp_list = NULL; #ifdef EBCDIC /* In a range, counts how many 0-2 of the ends of it came from literals, * not escapes. Thus we can tell if 'A' was input vs \x{C1} */ UV literal_endpoint = 0; #endif bool invert = FALSE; /* Is this class to be complemented */ /* Is there any thing like \W or [:^digit:] that matches above the legal * Unicode range? */ bool runtime_posix_matches_above_Unicode = FALSE; regnode * const orig_emit = RExC_emit; /* Save the original RExC_emit in case we need to change the emitted regop to an EXACT. */ const char * orig_parse = RExC_parse; const I32 orig_size = RExC_size; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGCLASS; #ifndef DEBUGGING PERL_UNUSED_ARG(depth); #endif DEBUG_PARSE("clas"); /* Assume we are going to generate an ANYOF node. */ ret = reganode(pRExC_state, ANYOF, 0); if (!SIZE_ONLY) { ANYOF_FLAGS(ret) = 0; } if (UCHARAT(RExC_parse) == '^') { /* Complement of range. */ RExC_parse++; invert = TRUE; RExC_naughty++; } if (SIZE_ONLY) { RExC_size += ANYOF_SKIP; listsv = &PL_sv_undef; /* For code scanners: listsv always non-NULL. */ } else { RExC_emit += ANYOF_SKIP; if (LOC) { ANYOF_FLAGS(ret) |= ANYOF_LOCALE; } listsv = newSVpvs("# comment\n"); initial_listsv_len = SvCUR(listsv); } nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0; if (!SIZE_ONLY && POSIXCC(nextvalue)) checkposixcc(pRExC_state); /* allow 1st char to be ] (allowing it to be - is dealt with later) */ if (UCHARAT(RExC_parse) == ']') goto charclassloop; parseit: while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != ']') { charclassloop: namedclass = OOB_NAMEDCLASS; /* initialize as illegal */ save_value = value; save_prevvalue = prevvalue; if (!range) { rangebegin = RExC_parse; element_count++; } if (UTF) { value = utf8n_to_uvchr((U8*)RExC_parse, RExC_end - RExC_parse, &numlen, UTF8_ALLOW_DEFAULT); RExC_parse += numlen; } else value = UCHARAT(RExC_parse++); nextvalue = RExC_parse < RExC_end ? UCHARAT(RExC_parse) : 0; if (value == '[' && POSIXCC(nextvalue)) namedclass = regpposixcc(pRExC_state, value); else if (value == '\\') { if (UTF) { value = utf8n_to_uvchr((U8*)RExC_parse, RExC_end - RExC_parse, &numlen, UTF8_ALLOW_DEFAULT); RExC_parse += numlen; } else value = UCHARAT(RExC_parse++); /* Some compilers cannot handle switching on 64-bit integer * values, therefore value cannot be an UV. Yes, this will * be a problem later if we want switch on Unicode. * A similar issue a little bit later when switching on * namedclass. --jhi */ switch ((I32)value) { case 'w': namedclass = ANYOF_WORDCHAR; break; case 'W': namedclass = ANYOF_NWORDCHAR; break; case 's': namedclass = ANYOF_SPACE; break; case 'S': namedclass = ANYOF_NSPACE; break; case 'd': namedclass = ANYOF_DIGIT; break; case 'D': namedclass = ANYOF_NDIGIT; break; case 'v': namedclass = ANYOF_VERTWS; break; case 'V': namedclass = ANYOF_NVERTWS; break; case 'h': namedclass = ANYOF_HORIZWS; break; case 'H': namedclass = ANYOF_NHORIZWS; break; case 'N': /* Handle \N{NAME} in class */ { /* We only pay attention to the first char of multichar strings being returned. I kinda wonder if this makes sense as it does change the behaviour from earlier versions, OTOH that behaviour was broken as well. */ if (! grok_bslash_N(pRExC_state, NULL, &value, flagp, depth, TRUE /* => charclass */)) { goto parseit; } } break; case 'p': case 'P': { char *e; /* This routine will handle any undefined properties */ U8 swash_init_flags = _CORE_SWASH_INIT_RETURN_IF_UNDEF; if (RExC_parse >= RExC_end) vFAIL2("Empty \\%c{}", (U8)value); if (*RExC_parse == '{') { const U8 c = (U8)value; e = strchr(RExC_parse++, '}'); if (!e) vFAIL2("Missing right brace on \\%c{}", c); while (isSPACE(UCHARAT(RExC_parse))) RExC_parse++; if (e == RExC_parse) vFAIL2("Empty \\%c{}", c); n = e - RExC_parse; while (isSPACE(UCHARAT(RExC_parse + n - 1))) n--; } else { e = RExC_parse; n = 1; } if (!SIZE_ONLY) { SV* invlist; char* name; if (UCHARAT(RExC_parse) == '^') { RExC_parse++; n--; value = value == 'p' ? 'P' : 'p'; /* toggle */ while (isSPACE(UCHARAT(RExC_parse))) { RExC_parse++; n--; } } /* Try to get the definition of the property into * . If /i is in effect, the effective property * will have its name be <__NAME_i>. The design is * discussed in commit * 2f833f5208e26b208886e51e09e2c072b5eabb46 */ Newx(name, n + sizeof("_i__\n"), char); sprintf(name, "%s%.*s%s\n", (FOLD) ? "__" : "", (int)n, RExC_parse, (FOLD) ? "_i" : "" ); /* Look up the property name, and get its swash and * inversion list, if the property is found */ if (swash) { SvREFCNT_dec(swash); } swash = _core_swash_init("utf8", name, &PL_sv_undef, 1, /* binary */ 0, /* not tr/// */ NULL, /* No inversion list */ &swash_init_flags ); if (! swash || ! (invlist = _get_swash_invlist(swash))) { if (swash) { SvREFCNT_dec(swash); swash = NULL; } /* Here didn't find it. It could be a user-defined * property that will be available at run-time. Add it * to the list to look up then */ Perl_sv_catpvf(aTHX_ listsv, "%cutf8::%s\n", (value == 'p' ? '+' : '!'), name); has_user_defined_property = TRUE; /* We don't know yet, so have to assume that the * property could match something in the Latin1 range, * hence something that isn't utf8. Note that this * would cause things in to match * inappropriately, except that any \p{}, including * this one forces Unicode semantics, which means there * is */ ANYOF_FLAGS(ret) |= ANYOF_NONBITMAP_NON_UTF8; } else { /* Here, did get the swash and its inversion list. If * the swash is from a user-defined property, then this * whole character class should be regarded as such */ has_user_defined_property = (swash_init_flags & _CORE_SWASH_INIT_USER_DEFINED_PROPERTY); /* Invert if asking for the complement */ if (value == 'P') { _invlist_union_complement_2nd(properties, invlist, &properties); /* The swash can't be used as-is, because we've * inverted things; delay removing it to here after * have copied its invlist above */ SvREFCNT_dec(swash); swash = NULL; } else { _invlist_union(properties, invlist, &properties); } } Safefree(name); } RExC_parse = e + 1; namedclass = ANYOF_MAX; /* no official name, but it's named */ /* \p means they want Unicode semantics */ RExC_uni_semantics = 1; } break; case 'n': value = '\n'; break; case 'r': value = '\r'; break; case 't': value = '\t'; break; case 'f': value = '\f'; break; case 'b': value = '\b'; break; case 'e': value = ASCII_TO_NATIVE('\033');break; case 'a': value = ASCII_TO_NATIVE('\007');break; case 'o': RExC_parse--; /* function expects to be pointed at the 'o' */ { const char* error_msg; bool valid = grok_bslash_o(RExC_parse, &value, &numlen, &error_msg, SIZE_ONLY); RExC_parse += numlen; if (! valid) { vFAIL(error_msg); } } if (PL_encoding && value < 0x100) { goto recode_encoding; } break; case 'x': RExC_parse--; /* function expects to be pointed at the 'x' */ { const char* error_msg; bool valid = grok_bslash_x(RExC_parse, &value, &numlen, &error_msg, 1); RExC_parse += numlen; if (! valid) { vFAIL(error_msg); } } if (PL_encoding && value < 0x100) goto recode_encoding; break; case 'c': value = grok_bslash_c(*RExC_parse++, UTF, SIZE_ONLY); break; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': { /* Take 1-3 octal digits */ I32 flags = PERL_SCAN_SILENT_ILLDIGIT; numlen = 3; value = grok_oct(--RExC_parse, &numlen, &flags, NULL); RExC_parse += numlen; if (PL_encoding && value < 0x100) goto recode_encoding; break; } recode_encoding: if (! RExC_override_recoding) { SV* enc = PL_encoding; value = reg_recode((const char)(U8)value, &enc); if (!enc && SIZE_ONLY) ckWARNreg(RExC_parse, "Invalid escape in the specified encoding"); break; } default: /* Allow \_ to not give an error */ if (!SIZE_ONLY && isALNUM(value) && value != '_') { ckWARN2reg(RExC_parse, "Unrecognized escape \\%c in character class passed through", (int)value); } break; } } /* end of \blah */ #ifdef EBCDIC else literal_endpoint++; #endif /* What matches in a locale is not known until runtime. This * includes what the Posix classes (like \w, [:space:]) match. * Room must be reserved (one time per class) to store such * classes, either if Perl is compiled so that locale nodes always * should have this space, or if there is such class info to be * stored. The space will contain a bit for each named class that * is to be matched against. This isn't needed for \p{} and * pseudo-classes, as they are not affected by locale, and hence * are dealt with separately */ if (LOC && ! need_class && (ANYOF_LOCALE == ANYOF_CLASS || (namedclass > OOB_NAMEDCLASS && namedclass < ANYOF_MAX))) { need_class = 1; if (SIZE_ONLY) { RExC_size += ANYOF_CLASS_SKIP - ANYOF_SKIP; } else { RExC_emit += ANYOF_CLASS_SKIP - ANYOF_SKIP; ANYOF_CLASS_ZERO(ret); } ANYOF_FLAGS(ret) |= ANYOF_CLASS; } if (namedclass > OOB_NAMEDCLASS) { /* this is a named class \blah */ /* a bad range like a-\d, a-[:digit:]. The '-' is taken as a * literal, as is the character that began the false range, i.e. * the 'a' in the examples */ if (range) { if (!SIZE_ONLY) { const int w = RExC_parse >= rangebegin ? RExC_parse - rangebegin : 0; ckWARN4reg(RExC_parse, "False [] range \"%*.*s\"", w, w, rangebegin); cp_list = add_cp_to_invlist(cp_list, '-'); cp_list = add_cp_to_invlist(cp_list, prevvalue); } range = 0; /* this was not a true range */ element_count += 2; /* So counts for three values */ } if (! SIZE_ONLY) { switch ((I32)namedclass) { case ANYOF_ALNUMC: /* C's alnum, in contrast to \w */ DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixAlnum, PL_L1PosixAlnum, "XPosixAlnum", listsv); break; case ANYOF_NALNUMC: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixAlnum, PL_L1PosixAlnum, "XPosixAlnum", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_ALPHA: DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixAlpha, PL_L1PosixAlpha, "XPosixAlpha", listsv); break; case ANYOF_NALPHA: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixAlpha, PL_L1PosixAlpha, "XPosixAlpha", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_ASCII: #ifdef HAS_ISASCII if (LOC) { ANYOF_CLASS_SET(ret, namedclass); } else #endif /* Not isascii(); just use the hard-coded definition for it */ _invlist_union(posixes, PL_ASCII, &posixes); break; case ANYOF_NASCII: #ifdef HAS_ISASCII if (LOC) { ANYOF_CLASS_SET(ret, namedclass); } else { #endif _invlist_union_complement_2nd(posixes, PL_ASCII, &posixes); if (DEPENDS_SEMANTICS) { ANYOF_FLAGS(ret) |= ANYOF_NON_UTF8_LATIN1_ALL; } #ifdef HAS_ISASCII } #endif break; case ANYOF_BLANK: if (hasISBLANK || ! LOC) { DO_POSIX(ret, namedclass, posixes, PL_PosixBlank, PL_XPosixBlank); } else { /* There is no isblank() and we are in locale: We use the ASCII range and the above-Latin1 range code points */ SV* scratch_list = NULL; /* Include all above-Latin1 blanks */ _invlist_intersection(PL_AboveLatin1, PL_XPosixBlank, &scratch_list); /* Add it to the running total of posix classes */ if (! posixes) { posixes = scratch_list; } else { _invlist_union(posixes, scratch_list, &posixes); SvREFCNT_dec(scratch_list); } /* Add the ASCII-range blanks to the running total. */ _invlist_union(posixes, PL_PosixBlank, &posixes); } break; case ANYOF_NBLANK: if (hasISBLANK || ! LOC) { DO_N_POSIX(ret, namedclass, posixes, PL_PosixBlank, PL_XPosixBlank); } else { /* There is no isblank() and we are in locale */ SV* scratch_list = NULL; /* Include all above-Latin1 non-blanks */ _invlist_subtract(PL_AboveLatin1, PL_XPosixBlank, &scratch_list); /* Add them to the running total of posix classes */ _invlist_subtract(PL_AboveLatin1, PL_XPosixBlank, &scratch_list); if (! posixes) { posixes = scratch_list; } else { _invlist_union(posixes, scratch_list, &posixes); SvREFCNT_dec(scratch_list); } /* Get the list of all non-ASCII-blanks in Latin 1, and * add them to the running total */ _invlist_subtract(PL_Latin1, PL_PosixBlank, &scratch_list); _invlist_union(posixes, scratch_list, &posixes); SvREFCNT_dec(scratch_list); } break; case ANYOF_CNTRL: DO_POSIX(ret, namedclass, posixes, PL_PosixCntrl, PL_XPosixCntrl); break; case ANYOF_NCNTRL: DO_N_POSIX(ret, namedclass, posixes, PL_PosixCntrl, PL_XPosixCntrl); break; case ANYOF_DIGIT: /* There are no digits in the Latin1 range outside of * ASCII, so call the macro that doesn't have to resolve * them */ DO_POSIX_LATIN1_ONLY_KNOWN_L1_RESOLVED(ret, namedclass, posixes, PL_PosixDigit, "XPosixDigit", listsv); break; case ANYOF_NDIGIT: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixDigit, PL_PosixDigit, "XPosixDigit", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_GRAPH: DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixGraph, PL_L1PosixGraph, "XPosixGraph", listsv); break; case ANYOF_NGRAPH: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixGraph, PL_L1PosixGraph, "XPosixGraph", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_HORIZWS: /* For these, we use the cp_list, as /d doesn't make a * difference in what these match. There would be problems * if these characters had folds other than themselves, as * cp_list is subject to folding. It turns out that \h * is just a synonym for XPosixBlank */ _invlist_union(cp_list, PL_XPosixBlank, &cp_list); break; case ANYOF_NHORIZWS: _invlist_union_complement_2nd(cp_list, PL_XPosixBlank, &cp_list); break; case ANYOF_LOWER: case ANYOF_NLOWER: { /* These require special handling, as they differ under folding, matching Cased there (which in the ASCII range is the same as Alpha */ SV* ascii_source; SV* l1_source; const char *Xname; if (FOLD && ! LOC) { ascii_source = PL_PosixAlpha; l1_source = PL_L1Cased; Xname = "Cased"; } else { ascii_source = PL_PosixLower; l1_source = PL_L1PosixLower; Xname = "XPosixLower"; } if (namedclass == ANYOF_LOWER) { DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, ascii_source, l1_source, Xname, listsv); } else { DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, ascii_source, l1_source, Xname, listsv, runtime_posix_matches_above_Unicode); } break; } case ANYOF_PRINT: DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixPrint, PL_L1PosixPrint, "XPosixPrint", listsv); break; case ANYOF_NPRINT: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixPrint, PL_L1PosixPrint, "XPosixPrint", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_PUNCT: DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixPunct, PL_L1PosixPunct, "XPosixPunct", listsv); break; case ANYOF_NPUNCT: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixPunct, PL_L1PosixPunct, "XPosixPunct", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_PSXSPC: DO_POSIX(ret, namedclass, posixes, PL_PosixSpace, PL_XPosixSpace); break; case ANYOF_NPSXSPC: DO_N_POSIX(ret, namedclass, posixes, PL_PosixSpace, PL_XPosixSpace); break; case ANYOF_SPACE: DO_POSIX(ret, namedclass, posixes, PL_PerlSpace, PL_XPerlSpace); break; case ANYOF_NSPACE: DO_N_POSIX(ret, namedclass, posixes, PL_PerlSpace, PL_XPerlSpace); break; case ANYOF_UPPER: /* Same as LOWER, above */ case ANYOF_NUPPER: { SV* ascii_source; SV* l1_source; const char *Xname; if (FOLD && ! LOC) { ascii_source = PL_PosixAlpha; l1_source = PL_L1Cased; Xname = "Cased"; } else { ascii_source = PL_PosixUpper; l1_source = PL_L1PosixUpper; Xname = "XPosixUpper"; } if (namedclass == ANYOF_UPPER) { DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, ascii_source, l1_source, Xname, listsv); } else { DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, ascii_source, l1_source, Xname, listsv, runtime_posix_matches_above_Unicode); } break; } case ANYOF_WORDCHAR: DO_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixWord, PL_L1PosixWord, "XPosixWord", listsv); break; case ANYOF_NWORDCHAR: DO_N_POSIX_LATIN1_ONLY_KNOWN(ret, namedclass, posixes, PL_PosixWord, PL_L1PosixWord, "XPosixWord", listsv, runtime_posix_matches_above_Unicode); break; case ANYOF_VERTWS: /* For these, we use the cp_list, as /d doesn't make a * difference in what these match. There would be problems * if these characters had folds other than themselves, as * cp_list is subject to folding */ _invlist_union(cp_list, PL_VertSpace, &cp_list); break; case ANYOF_NVERTWS: _invlist_union_complement_2nd(cp_list, PL_VertSpace, &cp_list); break; case ANYOF_XDIGIT: DO_POSIX(ret, namedclass, posixes, PL_PosixXDigit, PL_XPosixXDigit); break; case ANYOF_NXDIGIT: DO_N_POSIX(ret, namedclass, posixes, PL_PosixXDigit, PL_XPosixXDigit); break; case ANYOF_MAX: /* this is to handle \p and \P */ break; default: vFAIL("Invalid [::] class"); break; } continue; /* Go get next character */ } } /* end of namedclass \blah */ if (range) { if (prevvalue > value) /* b-a */ { const int w = RExC_parse - rangebegin; Simple_vFAIL4("Invalid [] range \"%*.*s\"", w, w, rangebegin); range = 0; /* not a valid range */ } } else { prevvalue = value; /* save the beginning of the potential range */ if (RExC_parse+1 < RExC_end && *RExC_parse == '-' && RExC_parse[1] != ']') { RExC_parse++; /* a bad range like \w-, [:word:]- ? */ if (namedclass > OOB_NAMEDCLASS) { if (ckWARN(WARN_REGEXP)) { const int w = RExC_parse >= rangebegin ? RExC_parse - rangebegin : 0; vWARN4(RExC_parse, "False [] range \"%*.*s\"", w, w, rangebegin); } if (!SIZE_ONLY) { cp_list = add_cp_to_invlist(cp_list, '-'); } element_count++; } else range = 1; /* yeah, it's a range! */ continue; /* but do it the next time */ } } /* Here, is the beginning of the range, if any; or * if not */ /* non-Latin1 code point implies unicode semantics. Must be set in * pass1 so is there for the whole of pass 2 */ if (value > 255) { RExC_uni_semantics = 1; } /* Ready to process either the single value, or the completed range. * For single-valued non-inverted ranges, we consider the possibility * of multi-char folds. (We made a conscious decision to not do this * for the other cases because it can often lead to non-intuitive * results. For example, you have the peculiar case that: * "s s" =~ /^[^\xDF]+$/i => Y * "ss" =~ /^[^\xDF]+$/i => N * * See [perl #89750] */ if (FOLD && ! invert && value == prevvalue) { if (value == LATIN_SMALL_LETTER_SHARP_S || (value > 255 && _invlist_contains_cp(PL_HasMultiCharFold, value))) { /* Here is indeed a multi-char fold. Get what it is */ U8 foldbuf[UTF8_MAXBYTES_CASE]; STRLEN foldlen; UV folded = _to_uni_fold_flags( value, foldbuf, &foldlen, FOLD_FLAGS_FULL | ((LOC) ? FOLD_FLAGS_LOCALE : (ASCII_FOLD_RESTRICTED) ? FOLD_FLAGS_NOMIX_ASCII : 0) ); /* Here, should be the first character of the * multi-char fold of , with containing the * whole thing. But, if this fold is not allowed (because of * the flags), will be the same as , and should * be processed like any other character, so skip the special * handling */ if (folded != value) { /* Skip if we are recursed, currently parsing the class * again. Otherwise add this character to the list of * multi-char folds. */ if (! RExC_in_multi_char_class) { AV** this_array_ptr; AV* this_array; STRLEN cp_count = utf8_length(foldbuf, foldbuf + foldlen); SV* multi_fold = sv_2mortal(newSVpvn("", 0)); Perl_sv_catpvf(aTHX_ multi_fold, "\\x{%"UVXf"}", value); if (! multi_char_matches) { multi_char_matches = newAV(); } /* is actually an array of arrays. * There will be one or two top-level elements: [2], * and/or [3]. The [2] element is an array, each * element thereof is a character which folds to two * characters; likewise for [3]. (Unicode guarantees a * maximum of 3 characters in any fold.) When we * rewrite the character class below, we will do so * such that the longest folds are written first, so * that it prefers the longest matching strings first. * This is done even if it turns out that any * quantifier is non-greedy, out of programmer * laziness. Tom Christiansen has agreed that this is * ok. This makes the test for the ligature 'ffi' come * before the test for 'ff' */ if (av_exists(multi_char_matches, cp_count)) { this_array_ptr = (AV**) av_fetch(multi_char_matches, cp_count, FALSE); this_array = *this_array_ptr; } else { this_array = newAV(); av_store(multi_char_matches, cp_count, (SV*) this_array); } av_push(this_array, multi_fold); } /* This element should not be processed further in this * class */ element_count--; value = save_value; prevvalue = save_prevvalue; continue; } } } /* Deal with this element of the class */ if (! SIZE_ONLY) { #ifndef EBCDIC cp_list = _add_range_to_invlist(cp_list, prevvalue, value); #else UV* this_range = _new_invlist(1); _append_range_to_invlist(this_range, prevvalue, value); /* In EBCDIC, the ranges 'A-Z' and 'a-z' are each not contiguous. * If this range was specified using something like 'i-j', we want * to include only the 'i' and the 'j', and not anything in * between, so exclude non-ASCII, non-alphabetics from it. * However, if the range was specified with something like * [\x89-\x91] or [\x89-j], all code points within it should be * included. literal_endpoint==2 means both ends of the range used * a literal character, not \x{foo} */ if (literal_endpoint == 2 && (prevvalue >= 'a' && value <= 'z') || (prevvalue >= 'A' && value <= 'Z')) { _invlist_intersection(this_range, PL_ASCII, &this_range, ); _invlist_intersection(this_range, PL_Alpha, &this_range, ); } _invlist_union(cp_list, this_range, &cp_list); literal_endpoint = 0; #endif } range = 0; /* this range (if it was one) is done now */ } /* End of loop through all the text within the brackets */ /* If anything in the class expands to more than one character, we have to * deal with them by building up a substitute parse string, and recursively * calling reg() on it, instead of proceeding */ if (multi_char_matches) { SV * substitute_parse = newSVpvn_flags("?:", 2, SVs_TEMP); I32 cp_count; STRLEN len; char *save_end = RExC_end; char *save_parse = RExC_parse; bool first_time = TRUE; /* First multi-char occurrence doesn't get a "|" */ I32 reg_flags; assert(! invert); #if 0 /* Have decided not to deal with multi-char folds in inverted classes, because too confusing */ if (invert) { sv_catpv(substitute_parse, "(?:"); } #endif /* Look at the longest folds first */ for (cp_count = av_len(multi_char_matches); cp_count > 0; cp_count--) { if (av_exists(multi_char_matches, cp_count)) { AV** this_array_ptr; SV* this_sequence; this_array_ptr = (AV**) av_fetch(multi_char_matches, cp_count, FALSE); while ((this_sequence = av_pop(*this_array_ptr)) != &PL_sv_undef) { if (! first_time) { sv_catpv(substitute_parse, "|"); } first_time = FALSE; sv_catpv(substitute_parse, SvPVX(this_sequence)); } } } /* If the character class contains anything else besides these * multi-character folds, have to include it in recursive parsing */ if (element_count) { sv_catpv(substitute_parse, "|["); sv_catpvn(substitute_parse, orig_parse, RExC_parse - orig_parse); sv_catpv(substitute_parse, "]"); } sv_catpv(substitute_parse, ")"); #if 0 if (invert) { /* This is a way to get the parse to skip forward a whole named * sequence instead of matching the 2nd character when it fails the * first */ sv_catpv(substitute_parse, "(*THEN)(*SKIP)(*FAIL)|.)"); } #endif RExC_parse = SvPV(substitute_parse, len); RExC_end = RExC_parse + len; RExC_in_multi_char_class = 1; RExC_emit = (regnode *)orig_emit; ret = reg(pRExC_state, 1, ®_flags, depth+1); *flagp |= reg_flags&(HASWIDTH|SIMPLE|SPSTART|POSTPONED); RExC_parse = save_parse; RExC_end = save_end; RExC_in_multi_char_class = 0; SvREFCNT_dec(multi_char_matches); return ret; } /* If the character class contains only a single element, it may be * optimizable into another node type which is smaller and runs faster. * Check if this is the case for this class */ if (element_count == 1) { U8 op = END; U8 arg = 0; if (namedclass > OOB_NAMEDCLASS) { /* this is a named class, like \w or [:digit:] or \p{foo} */ /* Certain named classes have equivalents that can appear outside a * character class, e.g. \w, \H. We use these instead of a * character class. */ switch ((I32)namedclass) { U8 offset; /* The first group is for node types that depend on the charset * modifier to the regex. We first calculate the base node * type, and if it should be inverted */ case ANYOF_NWORDCHAR: invert = ! invert; /* FALLTHROUGH */ case ANYOF_WORDCHAR: op = ALNUM; goto join_charset_classes; case ANYOF_NSPACE: invert = ! invert; /* FALLTHROUGH */ case ANYOF_SPACE: op = SPACE; goto join_charset_classes; case ANYOF_NDIGIT: invert = ! invert; /* FALLTHROUGH */ case ANYOF_DIGIT: op = DIGIT; join_charset_classes: /* Now that we have the base node type, we take advantage * of the enum ordering of the charset modifiers to get the * exact node type, For example the base SPACE also has * SPACEL, SPACEU, and SPACEA */ offset = get_regex_charset(RExC_flags); /* /aa is the same as /a for these */ if (offset == REGEX_ASCII_MORE_RESTRICTED_CHARSET) { offset = REGEX_ASCII_RESTRICTED_CHARSET; } else if (op == DIGIT && offset == REGEX_UNICODE_CHARSET) { offset = REGEX_DEPENDS_CHARSET; /* There is no DIGITU */ } op += offset; /* The number of varieties of each of these is the same, * hence, so is the delta between the normal and * complemented nodes */ if (invert) { op += NALNUM - ALNUM; } *flagp |= HASWIDTH|SIMPLE; break; /* The second group doesn't depend of the charset modifiers. * We just have normal and complemented */ case ANYOF_NHORIZWS: invert = ! invert; /* FALLTHROUGH */ case ANYOF_HORIZWS: is_horizws: op = (invert) ? NHORIZWS : HORIZWS; *flagp |= HASWIDTH|SIMPLE; break; case ANYOF_NVERTWS: invert = ! invert; /* FALLTHROUGH */ case ANYOF_VERTWS: op = (invert) ? NVERTWS : VERTWS; *flagp |= HASWIDTH|SIMPLE; break; case ANYOF_MAX: break; case ANYOF_NBLANK: invert = ! invert; /* FALLTHROUGH */ case ANYOF_BLANK: if (AT_LEAST_UNI_SEMANTICS && ! AT_LEAST_ASCII_RESTRICTED) { goto is_horizws; } /* FALLTHROUGH */ default: /* A generic posix class. All the /a ones can be handled * by the POSIXA opcode. And all are closed under folding * in the ASCII range, so FOLD doesn't matter */ if (AT_LEAST_ASCII_RESTRICTED || (! LOC && namedclass == ANYOF_ASCII)) { /* The odd numbered ones are the complements of the * next-lower even number one */ if (namedclass % 2 == 1) { invert = ! invert; namedclass--; } arg = namedclass_to_classnum(namedclass); op = (invert) ? NPOSIXA : POSIXA; } break; } } else if (value == prevvalue) { /* Here, the class consists of just a single code point */ if (invert) { if (! LOC && value == '\n') { op = REG_ANY; /* Optimize [^\n] */ *flagp |= HASWIDTH|SIMPLE; RExC_naughty++; } } else if (value < 256 || UTF) { /* Optimize a single value into an EXACTish node, but not if it * would require converting the pattern to UTF-8. */ op = compute_EXACTish(pRExC_state); } } /* Otherwise is a range */ else if (! LOC) { /* locale could vary these */ if (prevvalue == '0') { if (value == '9') { op = (invert) ? NDIGITA : DIGITA; *flagp |= HASWIDTH|SIMPLE; } } } /* Here, we have changed away from its initial value iff we found * an optimization */ if (op != END) { /* Throw away this ANYOF regnode, and emit the calculated one, * which should correspond to the beginning, not current, state of * the parse */ const char * cur_parse = RExC_parse; RExC_parse = (char *)orig_parse; if ( SIZE_ONLY) { if (! LOC) { /* To get locale nodes to not use the full ANYOF size would * require moving the code above that writes the portions * of it that aren't in other nodes to after this point. * e.g. ANYOF_CLASS_SET */ RExC_size = orig_size; } } else { RExC_emit = (regnode *)orig_emit; } ret = reg_node(pRExC_state, op); if (PL_regkind[op] == POSIXD) { if (! SIZE_ONLY) { FLAGS(ret) = arg; } *flagp |= HASWIDTH|SIMPLE; } else if (PL_regkind[op] == EXACT) { alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, 0, value); } RExC_parse = (char *) cur_parse; SvREFCNT_dec(listsv); return ret; } } if (SIZE_ONLY) return ret; /****** !SIZE_ONLY (Pass 2) AFTER HERE *********/ /* If folding, we calculate all characters that could fold to or from the * ones already on the list */ if (FOLD && cp_list) { UV start, end; /* End points of code point ranges */ SV* fold_intersection = NULL; /* If the highest code point is within Latin1, we can use the * compiled-in Alphas list, and not have to go out to disk. This * yields two false positives, the masculine and feminine oridinal * indicators, which are weeded out below using the * IS_IN_SOME_FOLD_L1() macro */ if (invlist_highest(cp_list) < 256) { _invlist_intersection(PL_L1PosixAlpha, cp_list, &fold_intersection); } else { /* Here, there are non-Latin1 code points, so we will have to go * fetch the list of all the characters that participate in folds */ if (! PL_utf8_foldable) { SV* swash = swash_init("utf8", "_Perl_Any_Folds", &PL_sv_undef, 1, 0); PL_utf8_foldable = _get_swash_invlist(swash); SvREFCNT_dec(swash); } /* This is a hash that for a particular fold gives all characters * that are involved in it */ if (! PL_utf8_foldclosures) { /* If we were unable to find any folds, then we likely won't be * able to find the closures. So just create an empty list. * Folding will effectively be restricted to the non-Unicode * rules hard-coded into Perl. (This case happens legitimately * during compilation of Perl itself before the Unicode tables * are generated) */ if (_invlist_len(PL_utf8_foldable) == 0) { PL_utf8_foldclosures = newHV(); } else { /* If the folds haven't been read in, call a fold function * to force that */ if (! PL_utf8_tofold) { U8 dummy[UTF8_MAXBYTES+1]; /* This string is just a short named one above \xff */ to_utf8_fold((U8*) HYPHEN_UTF8, dummy, NULL); assert(PL_utf8_tofold); /* Verify that worked */ } PL_utf8_foldclosures = _swash_inversion_hash(PL_utf8_tofold); } } /* Only the characters in this class that participate in folds need * be checked. Get the intersection of this class and all the * possible characters that are foldable. This can quickly narrow * down a large class */ _invlist_intersection(PL_utf8_foldable, cp_list, &fold_intersection); } /* Now look at the foldable characters in this class individually */ invlist_iterinit(fold_intersection); while (invlist_iternext(fold_intersection, &start, &end)) { UV j; /* Locale folding for Latin1 characters is deferred until runtime */ if (LOC && start < 256) { start = 256; } /* Look at every character in the range */ for (j = start; j <= end; j++) { U8 foldbuf[UTF8_MAXBYTES_CASE+1]; STRLEN foldlen; SV** listp; if (j < 256) { /* We have the latin1 folding rules hard-coded here so that * an innocent-looking character class, like /[ks]/i won't * have to go out to disk to find the possible matches. * XXX It would be better to generate these via regen, in * case a new version of the Unicode standard adds new * mappings, though that is not really likely, and may be * caught by the default: case of the switch below. */ if (IS_IN_SOME_FOLD_L1(j)) { /* ASCII is always matched; non-ASCII is matched only * under Unicode rules */ if (isASCII(j) || AT_LEAST_UNI_SEMANTICS) { cp_list = add_cp_to_invlist(cp_list, PL_fold_latin1[j]); } else { depends_list = add_cp_to_invlist(depends_list, PL_fold_latin1[j]); } } if (HAS_NONLATIN1_FOLD_CLOSURE(j) && (! isASCII(j) || ! ASCII_FOLD_RESTRICTED)) { /* Certain Latin1 characters have matches outside * Latin1. To get here, is one of those * characters. None of these matches is valid for * ASCII characters under /aa, which is why the 'if' * just above excludes those. These matches only * happen when the target string is utf8. The code * below adds the single fold closures for to the * inversion list. */ switch (j) { case 'k': case 'K': cp_list = add_cp_to_invlist(cp_list, KELVIN_SIGN); break; case 's': case 'S': cp_list = add_cp_to_invlist(cp_list, LATIN_SMALL_LETTER_LONG_S); break; case MICRO_SIGN: cp_list = add_cp_to_invlist(cp_list, GREEK_CAPITAL_LETTER_MU); cp_list = add_cp_to_invlist(cp_list, GREEK_SMALL_LETTER_MU); break; case LATIN_CAPITAL_LETTER_A_WITH_RING_ABOVE: case LATIN_SMALL_LETTER_A_WITH_RING_ABOVE: cp_list = add_cp_to_invlist(cp_list, ANGSTROM_SIGN); break; case LATIN_SMALL_LETTER_Y_WITH_DIAERESIS: cp_list = add_cp_to_invlist(cp_list, LATIN_CAPITAL_LETTER_Y_WITH_DIAERESIS); break; case LATIN_SMALL_LETTER_SHARP_S: cp_list = add_cp_to_invlist(cp_list, LATIN_CAPITAL_LETTER_SHARP_S); break; case 'F': case 'f': case 'I': case 'i': case 'L': case 'l': case 'T': case 't': case 'A': case 'a': case 'H': case 'h': case 'J': case 'j': case 'N': case 'n': case 'W': case 'w': case 'Y': case 'y': /* These all are targets of multi-character * folds from code points that require UTF8 to * express, so they can't match unless the * target string is in UTF-8, so no action here * is necessary, as regexec.c properly handles * the general case for UTF-8 matching and * multi-char folds */ break; default: /* Use deprecated warning to increase the * chances of this being output */ ckWARN2regdep(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j); break; } } continue; } /* Here is an above Latin1 character. We don't have the rules * hard-coded for it. First, get its fold. This is the simple * fold, as the multi-character folds have been handled earlier * and separated out */ _to_uni_fold_flags(j, foldbuf, &foldlen, ((LOC) ? FOLD_FLAGS_LOCALE : (ASCII_FOLD_RESTRICTED) ? FOLD_FLAGS_NOMIX_ASCII : 0)); /* Single character fold of above Latin1. Add everything in * its fold closure to the list that this node should match. * The fold closures data structure is a hash with the keys * being the UTF-8 of every character that is folded to, like * 'k', and the values each an array of all code points that * fold to its key. e.g. [ 'k', 'K', KELVIN_SIGN ]. * Multi-character folds are not included */ if ((listp = hv_fetch(PL_utf8_foldclosures, (char *) foldbuf, foldlen, FALSE))) { AV* list = (AV*) *listp; IV k; for (k = 0; k <= av_len(list); k++) { SV** c_p = av_fetch(list, k, FALSE); UV c; if (c_p == NULL) { Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure"); } c = SvUV(*c_p); /* /aa doesn't allow folds between ASCII and non-; /l * doesn't allow them between above and below 256 */ if ((ASCII_FOLD_RESTRICTED && (isASCII(c) != isASCII(j))) || (LOC && ((c < 256) != (j < 256)))) { continue; } /* Folds involving non-ascii Latin1 characters * under /d are added to a separate list */ if (isASCII(c) || c > 255 || AT_LEAST_UNI_SEMANTICS) { cp_list = add_cp_to_invlist(cp_list, c); } else { depends_list = add_cp_to_invlist(depends_list, c); } } } } } SvREFCNT_dec(fold_intersection); } /* And combine the result (if any) with any inversion list from posix * classes. The lists are kept separate up to now because we don't want to * fold the classes (folding of those is automatically handled by the swash * fetching code) */ if (posixes) { if (! DEPENDS_SEMANTICS) { if (cp_list) { _invlist_union(cp_list, posixes, &cp_list); SvREFCNT_dec(posixes); } else { cp_list = posixes; } } else { /* Under /d, we put into a separate list the Latin1 things that * match only when the target string is utf8 */ SV* nonascii_but_latin1_properties = NULL; _invlist_intersection(posixes, PL_Latin1, &nonascii_but_latin1_properties); _invlist_subtract(nonascii_but_latin1_properties, PL_ASCII, &nonascii_but_latin1_properties); _invlist_subtract(posixes, nonascii_but_latin1_properties, &posixes); if (cp_list) { _invlist_union(cp_list, posixes, &cp_list); SvREFCNT_dec(posixes); } else { cp_list = posixes; } if (depends_list) { _invlist_union(depends_list, nonascii_but_latin1_properties, &depends_list); SvREFCNT_dec(nonascii_but_latin1_properties); } else { depends_list = nonascii_but_latin1_properties; } } } /* And combine the result (if any) with any inversion list from properties. * The lists are kept separate up to now so that we can distinguish the two * in regards to matching above-Unicode. A run-time warning is generated * if a Unicode property is matched against a non-Unicode code point. But, * we allow user-defined properties to match anything, without any warning, * and we also suppress the warning if there is a portion of the character * class that isn't a Unicode property, and which matches above Unicode, \W * or [\x{110000}] for example. * (Note that in this case, unlike the Posix one above, there is no * , because having a Unicode property forces Unicode * semantics */ if (properties) { bool warn_super = ! has_user_defined_property; if (cp_list) { /* If it matters to the final outcome, see if a non-property * component of the class matches above Unicode. If so, the * warning gets suppressed. This is true even if just a single * such code point is specified, as though not strictly correct if * another such code point is matched against, the fact that they * are using above-Unicode code points indicates they should know * the issues involved */ if (warn_super) { bool non_prop_matches_above_Unicode = runtime_posix_matches_above_Unicode | (invlist_highest(cp_list) > PERL_UNICODE_MAX); if (invert) { non_prop_matches_above_Unicode = ! non_prop_matches_above_Unicode; } warn_super = ! non_prop_matches_above_Unicode; } _invlist_union(properties, cp_list, &cp_list); SvREFCNT_dec(properties); } else { cp_list = properties; } if (warn_super) { ANYOF_FLAGS(ret) |= ANYOF_WARN_SUPER; } } /* Here, we have calculated what code points should be in the character * class. * * Now we can see about various optimizations. Fold calculation (which we * did above) needs to take place before inversion. Otherwise /[^k]/i * would invert to include K, which under /i would match k, which it * shouldn't. Therefore we can't invert folded locale now, as it won't be * folded until runtime */ /* Optimize inverted simple patterns (e.g. [^a-z]) when everything is known * at compile time. Besides not inverting folded locale now, we can't * invert if there are things such as \w, which aren't known until runtime * */ if (invert && ! (LOC && (FOLD || (ANYOF_FLAGS(ret) & ANYOF_CLASS))) && ! depends_list && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION) { _invlist_invert(cp_list); /* Any swash can't be used as-is, because we've inverted things */ if (swash) { SvREFCNT_dec(swash); swash = NULL; } /* Clear the invert flag since have just done it here */ invert = FALSE; } /* If we didn't do folding, it's because some information isn't available * until runtime; set the run-time fold flag for these. (We don't have to * worry about properties folding, as that is taken care of by the swash * fetching) */ if (FOLD && LOC) { ANYOF_FLAGS(ret) |= ANYOF_LOC_FOLD; } /* Some character classes are equivalent to other nodes. Such nodes take * up less room and generally fewer operations to execute than ANYOF nodes. * Above, we checked for and optimized into some such equivalents for * certain common classes that are easy to test. Getting to this point in * the code means that the class didn't get optimized there. Since this * code is only executed in Pass 2, it is too late to save space--it has * been allocated in Pass 1, and currently isn't given back. But turning * things into an EXACTish node can allow the optimizer to join it to any * adjacent such nodes. And if the class is equivalent to things like /./, * expensive run-time swashes can be avoided. Now that we have more * complete information, we can find things necessarily missed by the * earlier code. I (khw) am not sure how much to look for here. It would * be easy, but perhaps too slow, to check any candidates against all the * node types they could possibly match using _invlistEQ(). */ if (cp_list && ! invert && ! depends_list && ! (ANYOF_FLAGS(ret) & ANYOF_CLASS) && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION) { UV start, end; U8 op = END; /* The optimzation node-type */ const char * cur_parse= RExC_parse; invlist_iterinit(cp_list); if (! invlist_iternext(cp_list, &start, &end)) { /* Here, the list is empty. This happens, for example, when a * Unicode property is the only thing in the character class, and * it doesn't match anything. (perluniprops.pod notes such * properties) */ op = OPFAIL; *flagp |= HASWIDTH|SIMPLE; } else if (start == end) { /* The range is a single code point */ if (! invlist_iternext(cp_list, &start, &end) /* Don't do this optimization if it would require changing * the pattern to UTF-8 */ && (start < 256 || UTF)) { /* Here, the list contains a single code point. Can optimize * into an EXACT node */ value = start; if (! FOLD) { op = EXACT; } else if (LOC) { /* A locale node under folding with one code point can be * an EXACTFL, as its fold won't be calculated until * runtime */ op = EXACTFL; } else { /* Here, we are generally folding, but there is only one * code point to match. If we have to, we use an EXACT * node, but it would be better for joining with adjacent * nodes in the optimization pass if we used the same * EXACTFish node that any such are likely to be. We can * do this iff the code point doesn't participate in any * folds. For example, an EXACTF of a colon is the same as * an EXACT one, since nothing folds to or from a colon. */ if (value < 256) { if (IS_IN_SOME_FOLD_L1(value)) { op = EXACT; } } else { if (! PL_utf8_foldable) { SV* swash = swash_init("utf8", "_Perl_Any_Folds", &PL_sv_undef, 1, 0); PL_utf8_foldable = _get_swash_invlist(swash); SvREFCNT_dec(swash); } if (_invlist_contains_cp(PL_utf8_foldable, value)) { op = EXACT; } } /* If we haven't found the node type, above, it means we * can use the prevailing one */ if (op == END) { op = compute_EXACTish(pRExC_state); } } } } else if (start == 0) { if (end == UV_MAX) { op = SANY; *flagp |= HASWIDTH|SIMPLE; RExC_naughty++; } else if (end == '\n' - 1 && invlist_iternext(cp_list, &start, &end) && start == '\n' + 1 && end == UV_MAX) { op = REG_ANY; *flagp |= HASWIDTH|SIMPLE; RExC_naughty++; } } if (op != END) { RExC_parse = (char *)orig_parse; RExC_emit = (regnode *)orig_emit; ret = reg_node(pRExC_state, op); RExC_parse = (char *)cur_parse; if (PL_regkind[op] == EXACT) { alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, 0, value); } SvREFCNT_dec(listsv); return ret; } } /* Here, contains all the code points we can determine at * compile time that match under all conditions. Go through it, and * for things that belong in the bitmap, put them there, and delete from * . While we are at it, see if everything above 255 is in the * list, and if so, set a flag to speed up execution */ ANYOF_BITMAP_ZERO(ret); if (cp_list) { /* This gets set if we actually need to modify things */ bool change_invlist = FALSE; UV start, end; /* Start looking through */ invlist_iterinit(cp_list); while (invlist_iternext(cp_list, &start, &end)) { UV high; int i; if (end == UV_MAX && start <= 256) { ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL; } /* Quit if are above what we should change */ if (start > 255) { break; } change_invlist = TRUE; /* Set all the bits in the range, up to the max that we are doing */ high = (end < 255) ? end : 255; for (i = start; i <= (int) high; i++) { if (! ANYOF_BITMAP_TEST(ret, i)) { ANYOF_BITMAP_SET(ret, i); prevvalue = value; value = i; } } } /* Done with loop; remove any code points that are in the bitmap from * */ if (change_invlist) { _invlist_subtract(cp_list, PL_Latin1, &cp_list); } /* If have completely emptied it, remove it completely */ if (_invlist_len(cp_list) == 0) { SvREFCNT_dec(cp_list); cp_list = NULL; } } if (invert) { ANYOF_FLAGS(ret) |= ANYOF_INVERT; } /* Here, the bitmap has been populated with all the Latin1 code points that * always match. Can now add to the overall list those that match only * when the target string is UTF-8 (). */ if (depends_list) { if (cp_list) { _invlist_union(cp_list, depends_list, &cp_list); SvREFCNT_dec(depends_list); } else { cp_list = depends_list; } } /* If there is a swash and more than one element, we can't use the swash in * the optimization below. */ if (swash && element_count > 1) { SvREFCNT_dec(swash); swash = NULL; } if (! cp_list && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION) { ARG_SET(ret, ANYOF_NONBITMAP_EMPTY); SvREFCNT_dec(listsv); } else { /* av[0] stores the character class description in its textual form: * used later (regexec.c:Perl_regclass_swash()) to initialize the * appropriate swash, and is also useful for dumping the regnode. * av[1] if NULL, is a placeholder to later contain the swash computed * from av[0]. But if no further computation need be done, the * swash is stored there now. * av[2] stores the cp_list inversion list for use in addition or * instead of av[0]; used only if av[1] is NULL * av[3] is set if any component of the class is from a user-defined * property; used only if av[1] is NULL */ AV * const av = newAV(); SV *rv; av_store(av, 0, (HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION) ? listsv : &PL_sv_undef); if (swash) { av_store(av, 1, swash); SvREFCNT_dec(cp_list); } else { av_store(av, 1, NULL); if (cp_list) { av_store(av, 2, cp_list); av_store(av, 3, newSVuv(has_user_defined_property)); } } rv = newRV_noinc(MUTABLE_SV(av)); n = add_data(pRExC_state, 1, "s"); RExC_rxi->data->data[n] = (void*)rv; ARG_SET(ret, n); } *flagp |= HASWIDTH|SIMPLE; return ret; } #undef HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION /* reg_skipcomment() Absorbs an /x style # comments from the input stream. Returns true if there is more text remaining in the stream. Will set the REG_SEEN_RUN_ON_COMMENT flag if the comment terminates the pattern without including a newline. Note its the callers responsibility to ensure that we are actually in /x mode */ STATIC bool S_reg_skipcomment(pTHX_ RExC_state_t *pRExC_state) { bool ended = 0; PERL_ARGS_ASSERT_REG_SKIPCOMMENT; while (RExC_parse < RExC_end) if (*RExC_parse++ == '\n') { ended = 1; break; } if (!ended) { /* we ran off the end of the pattern without ending the comment, so we have to add an \n when wrapping */ RExC_seen |= REG_SEEN_RUN_ON_COMMENT; return 0; } else return 1; } /* nextchar() Advances the parse position, and optionally absorbs "whitespace" from the inputstream. Without /x "whitespace" means (?#...) style comments only, with /x this means (?#...) and # comments and whitespace proper. Returns the RExC_parse point from BEFORE the scan occurs. This is the /x friendly way of saying RExC_parse++. */ STATIC char* S_nextchar(pTHX_ RExC_state_t *pRExC_state) { char* const retval = RExC_parse++; PERL_ARGS_ASSERT_NEXTCHAR; for (;;) { if (RExC_end - RExC_parse >= 3 && *RExC_parse == '(' && RExC_parse[1] == '?' && RExC_parse[2] == '#') { while (*RExC_parse != ')') { if (RExC_parse == RExC_end) FAIL("Sequence (?#... not terminated"); RExC_parse++; } RExC_parse++; continue; } if (RExC_flags & RXf_PMf_EXTENDED) { if (isSPACE(*RExC_parse)) { RExC_parse++; continue; } else if (*RExC_parse == '#') { if ( reg_skipcomment( pRExC_state ) ) continue; } } return retval; } } /* - reg_node - emit a node */ STATIC regnode * /* Location. */ S_reg_node(pTHX_ RExC_state_t *pRExC_state, U8 op) { dVAR; regnode *ptr; regnode * const ret = RExC_emit; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REG_NODE; if (SIZE_ONLY) { SIZE_ALIGN(RExC_size); RExC_size += 1; return(ret); } if (RExC_emit >= RExC_emit_bound) Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d, %p>=%p", op, RExC_emit, RExC_emit_bound); NODE_ALIGN_FILL(ret); ptr = ret; FILL_ADVANCE_NODE(ptr, op); #ifdef RE_TRACK_PATTERN_OFFSETS if (RExC_offsets) { /* MJD */ MJD_OFFSET_DEBUG(("%s:%d: (op %s) %s %"UVuf" (len %"UVuf") (max %"UVuf").\n", "reg_node", __LINE__, PL_reg_name[op], (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0] ? "Overwriting end of array!\n" : "OK", (UV)(RExC_emit - RExC_emit_start), (UV)(RExC_parse - RExC_start), (UV)RExC_offsets[0])); Set_Node_Offset(RExC_emit, RExC_parse + (op == END)); } #endif RExC_emit = ptr; return(ret); } /* - reganode - emit a node with an argument */ STATIC regnode * /* Location. */ S_reganode(pTHX_ RExC_state_t *pRExC_state, U8 op, U32 arg) { dVAR; regnode *ptr; regnode * const ret = RExC_emit; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGANODE; if (SIZE_ONLY) { SIZE_ALIGN(RExC_size); RExC_size += 2; /* We can't do this: assert(2==regarglen[op]+1); Anything larger than this has to allocate the extra amount. If we changed this to be: RExC_size += (1 + regarglen[op]); then it wouldn't matter. Its not clear what side effect might come from that so its not done so far. -- dmq */ return(ret); } if (RExC_emit >= RExC_emit_bound) Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d, %p>=%p", op, RExC_emit, RExC_emit_bound); NODE_ALIGN_FILL(ret); ptr = ret; FILL_ADVANCE_NODE_ARG(ptr, op, arg); #ifdef RE_TRACK_PATTERN_OFFSETS if (RExC_offsets) { /* MJD */ MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n", "reganode", __LINE__, PL_reg_name[op], (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0] ? "Overwriting end of array!\n" : "OK", (UV)(RExC_emit - RExC_emit_start), (UV)(RExC_parse - RExC_start), (UV)RExC_offsets[0])); Set_Cur_Node_Offset; } #endif RExC_emit = ptr; return(ret); } /* - reguni - emit (if appropriate) a Unicode character */ STATIC STRLEN S_reguni(pTHX_ const RExC_state_t *pRExC_state, UV uv, char* s) { dVAR; PERL_ARGS_ASSERT_REGUNI; return SIZE_ONLY ? UNISKIP(uv) : (uvchr_to_utf8((U8*)s, uv) - (U8*)s); } /* - reginsert - insert an operator in front of already-emitted operand * * Means relocating the operand. */ STATIC void S_reginsert(pTHX_ RExC_state_t *pRExC_state, U8 op, regnode *opnd, U32 depth) { dVAR; regnode *src; regnode *dst; regnode *place; const int offset = regarglen[(U8)op]; const int size = NODE_STEP_REGNODE + offset; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGINSERT; PERL_UNUSED_ARG(depth); /* (PL_regkind[(U8)op] == CURLY ? EXTRA_STEP_2ARGS : 0); */ DEBUG_PARSE_FMT("inst"," - %s",PL_reg_name[op]); if (SIZE_ONLY) { RExC_size += size; return; } src = RExC_emit; RExC_emit += size; dst = RExC_emit; if (RExC_open_parens) { int paren; /*DEBUG_PARSE_FMT("inst"," - %"IVdf, (IV)RExC_npar);*/ for ( paren=0 ; paren < RExC_npar ; paren++ ) { if ( RExC_open_parens[paren] >= opnd ) { /*DEBUG_PARSE_FMT("open"," - %d",size);*/ RExC_open_parens[paren] += size; } else { /*DEBUG_PARSE_FMT("open"," - %s","ok");*/ } if ( RExC_close_parens[paren] >= opnd ) { /*DEBUG_PARSE_FMT("close"," - %d",size);*/ RExC_close_parens[paren] += size; } else { /*DEBUG_PARSE_FMT("close"," - %s","ok");*/ } } } while (src > opnd) { StructCopy(--src, --dst, regnode); #ifdef RE_TRACK_PATTERN_OFFSETS if (RExC_offsets) { /* MJD 20010112 */ MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s copy %"UVuf" -> %"UVuf" (max %"UVuf").\n", "reg_insert", __LINE__, PL_reg_name[op], (UV)(dst - RExC_emit_start) > RExC_offsets[0] ? "Overwriting end of array!\n" : "OK", (UV)(src - RExC_emit_start), (UV)(dst - RExC_emit_start), (UV)RExC_offsets[0])); Set_Node_Offset_To_R(dst-RExC_emit_start, Node_Offset(src)); Set_Node_Length_To_R(dst-RExC_emit_start, Node_Length(src)); } #endif } place = opnd; /* Op node, where operand used to be. */ #ifdef RE_TRACK_PATTERN_OFFSETS if (RExC_offsets) { /* MJD */ MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n", "reginsert", __LINE__, PL_reg_name[op], (UV)(place - RExC_emit_start) > RExC_offsets[0] ? "Overwriting end of array!\n" : "OK", (UV)(place - RExC_emit_start), (UV)(RExC_parse - RExC_start), (UV)RExC_offsets[0])); Set_Node_Offset(place, RExC_parse); Set_Node_Length(place, 1); } #endif src = NEXTOPER(place); FILL_ADVANCE_NODE(place, op); Zero(src, offset, regnode); } /* - regtail - set the next-pointer at the end of a node chain of p to val. - SEE ALSO: regtail_study */ /* TODO: All three parms should be const */ STATIC void S_regtail(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth) { dVAR; regnode *scan; GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGTAIL; #ifndef DEBUGGING PERL_UNUSED_ARG(depth); #endif if (SIZE_ONLY) return; /* Find last node. */ scan = p; for (;;) { regnode * const temp = regnext(scan); DEBUG_PARSE_r({ SV * const mysv=sv_newmortal(); DEBUG_PARSE_MSG((scan==p ? "tail" : "")); regprop(RExC_rx, mysv, scan); PerlIO_printf(Perl_debug_log, "~ %s (%d) %s %s\n", SvPV_nolen_const(mysv), REG_NODE_NUM(scan), (temp == NULL ? "->" : ""), (temp == NULL ? PL_reg_name[OP(val)] : "") ); }); if (temp == NULL) break; scan = temp; } if (reg_off_by_arg[OP(scan)]) { ARG_SET(scan, val - scan); } else { NEXT_OFF(scan) = val - scan; } } #ifdef DEBUGGING /* - regtail_study - set the next-pointer at the end of a node chain of p to val. - Look for optimizable sequences at the same time. - currently only looks for EXACT chains. This is experimental code. The idea is to use this routine to perform in place optimizations on branches and groups as they are constructed, with the long term intention of removing optimization from study_chunk so that it is purely analytical. Currently only used when in DEBUG mode. The macro REGTAIL_STUDY() is used to control which is which. */ /* TODO: All four parms should be const */ STATIC U8 S_regtail_study(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth) { dVAR; regnode *scan; U8 exact = PSEUDO; #ifdef EXPERIMENTAL_INPLACESCAN I32 min = 0; #endif GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGTAIL_STUDY; if (SIZE_ONLY) return exact; /* Find last node. */ scan = p; for (;;) { regnode * const temp = regnext(scan); #ifdef EXPERIMENTAL_INPLACESCAN if (PL_regkind[OP(scan)] == EXACT) { bool has_exactf_sharp_s; /* Unexamined in this routine */ if (join_exact(pRExC_state,scan,&min, &has_exactf_sharp_s, 1,val,depth+1)) return EXACT; } #endif if ( exact ) { switch (OP(scan)) { case EXACT: case EXACTF: case EXACTFA: case EXACTFU: case EXACTFU_SS: case EXACTFU_TRICKYFOLD: case EXACTFL: if( exact == PSEUDO ) exact= OP(scan); else if ( exact != OP(scan) ) exact= 0; case NOTHING: break; default: exact= 0; } } DEBUG_PARSE_r({ SV * const mysv=sv_newmortal(); DEBUG_PARSE_MSG((scan==p ? "tsdy" : "")); regprop(RExC_rx, mysv, scan); PerlIO_printf(Perl_debug_log, "~ %s (%d) -> %s\n", SvPV_nolen_const(mysv), REG_NODE_NUM(scan), PL_reg_name[exact]); }); if (temp == NULL) break; scan = temp; } DEBUG_PARSE_r({ SV * const mysv_val=sv_newmortal(); DEBUG_PARSE_MSG(""); regprop(RExC_rx, mysv_val, val); PerlIO_printf(Perl_debug_log, "~ attach to %s (%"IVdf") offset to %"IVdf"\n", SvPV_nolen_const(mysv_val), (IV)REG_NODE_NUM(val), (IV)(val - scan) ); }); if (reg_off_by_arg[OP(scan)]) { ARG_SET(scan, val - scan); } else { NEXT_OFF(scan) = val - scan; } return exact; } #endif /* - regdump - dump a regexp onto Perl_debug_log in vaguely comprehensible form */ #ifdef DEBUGGING static void S_regdump_extflags(pTHX_ const char *lead, const U32 flags) { int bit; int set=0; regex_charset cs; for (bit=0; bit<32; bit++) { if (flags & (1<program, ri->program + 1, NULL, NULL, sv, 0, 0); /* Header fields of interest. */ if (r->anchored_substr) { RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->anchored_substr), RE_SV_DUMPLEN(r->anchored_substr), 30); PerlIO_printf(Perl_debug_log, "anchored %s%s at %"IVdf" ", s, RE_SV_TAIL(r->anchored_substr), (IV)r->anchored_offset); } else if (r->anchored_utf8) { RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->anchored_utf8), RE_SV_DUMPLEN(r->anchored_utf8), 30); PerlIO_printf(Perl_debug_log, "anchored utf8 %s%s at %"IVdf" ", s, RE_SV_TAIL(r->anchored_utf8), (IV)r->anchored_offset); } if (r->float_substr) { RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->float_substr), RE_SV_DUMPLEN(r->float_substr), 30); PerlIO_printf(Perl_debug_log, "floating %s%s at %"IVdf"..%"UVuf" ", s, RE_SV_TAIL(r->float_substr), (IV)r->float_min_offset, (UV)r->float_max_offset); } else if (r->float_utf8) { RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->float_utf8), RE_SV_DUMPLEN(r->float_utf8), 30); PerlIO_printf(Perl_debug_log, "floating utf8 %s%s at %"IVdf"..%"UVuf" ", s, RE_SV_TAIL(r->float_utf8), (IV)r->float_min_offset, (UV)r->float_max_offset); } if (r->check_substr || r->check_utf8) PerlIO_printf(Perl_debug_log, (const char *) (r->check_substr == r->float_substr && r->check_utf8 == r->float_utf8 ? "(checking floating" : "(checking anchored")); if (r->extflags & RXf_NOSCAN) PerlIO_printf(Perl_debug_log, " noscan"); if (r->extflags & RXf_CHECK_ALL) PerlIO_printf(Perl_debug_log, " isall"); if (r->check_substr || r->check_utf8) PerlIO_printf(Perl_debug_log, ") "); if (ri->regstclass) { regprop(r, sv, ri->regstclass); PerlIO_printf(Perl_debug_log, "stclass %s ", SvPVX_const(sv)); } if (r->extflags & RXf_ANCH) { PerlIO_printf(Perl_debug_log, "anchored"); if (r->extflags & RXf_ANCH_BOL) PerlIO_printf(Perl_debug_log, "(BOL)"); if (r->extflags & RXf_ANCH_MBOL) PerlIO_printf(Perl_debug_log, "(MBOL)"); if (r->extflags & RXf_ANCH_SBOL) PerlIO_printf(Perl_debug_log, "(SBOL)"); if (r->extflags & RXf_ANCH_GPOS) PerlIO_printf(Perl_debug_log, "(GPOS)"); PerlIO_putc(Perl_debug_log, ' '); } if (r->extflags & RXf_GPOS_SEEN) PerlIO_printf(Perl_debug_log, "GPOS:%"UVuf" ", (UV)r->gofs); if (r->intflags & PREGf_SKIP) PerlIO_printf(Perl_debug_log, "plus "); if (r->intflags & PREGf_IMPLICIT) PerlIO_printf(Perl_debug_log, "implicit "); PerlIO_printf(Perl_debug_log, "minlen %"IVdf" ", (IV)r->minlen); if (r->extflags & RXf_EVAL_SEEN) PerlIO_printf(Perl_debug_log, "with eval "); PerlIO_printf(Perl_debug_log, "\n"); DEBUG_FLAGS_r(regdump_extflags("r->extflags: ",r->extflags)); #else PERL_ARGS_ASSERT_REGDUMP; PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(r); #endif /* DEBUGGING */ } /* - regprop - printable representation of opcode */ #define EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags) \ STMT_START { \ if (do_sep) { \ Perl_sv_catpvf(aTHX_ sv,"%s][%s",PL_colors[1],PL_colors[0]); \ if (flags & ANYOF_INVERT) \ /*make sure the invert info is in each */ \ sv_catpvs(sv, "^"); \ do_sep = 0; \ } \ } STMT_END void Perl_regprop(pTHX_ const regexp *prog, SV *sv, const regnode *o) { #ifdef DEBUGGING dVAR; int k; /* Should be synchronized with * ANYOF_ #xdefines in regcomp.h */ static const char * const anyofs[] = { "\\w", "\\W", "\\s", "\\S", "\\d", "\\D", "[:alnum:]", "[:^alnum:]", "[:alpha:]", "[:^alpha:]", "[:ascii:]", "[:^ascii:]", "[:cntrl:]", "[:^cntrl:]", "[:graph:]", "[:^graph:]", "[:lower:]", "[:^lower:]", "[:print:]", "[:^print:]", "[:punct:]", "[:^punct:]", "[:upper:]", "[:^upper:]", "[:xdigit:]", "[:^xdigit:]", "[:space:]", "[:^space:]", "[:blank:]", "[:^blank:]" }; RXi_GET_DECL(prog,progi); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGPROP; sv_setpvs(sv, ""); if (OP(o) > REGNODE_MAX) /* regnode.type is unsigned */ /* It would be nice to FAIL() here, but this may be called from regexec.c, and it would be hard to supply pRExC_state. */ Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(o), (int)REGNODE_MAX); sv_catpv(sv, PL_reg_name[OP(o)]); /* Take off const! */ k = PL_regkind[OP(o)]; if (k == EXACT) { sv_catpvs(sv, " "); /* Using is_utf8_string() (via PERL_PV_UNI_DETECT) * is a crude hack but it may be the best for now since * we have no flag "this EXACTish node was UTF-8" * --jhi */ pv_pretty(sv, STRING(o), STR_LEN(o), 60, PL_colors[0], PL_colors[1], PERL_PV_ESCAPE_UNI_DETECT | PERL_PV_ESCAPE_NONASCII | PERL_PV_PRETTY_ELLIPSES | PERL_PV_PRETTY_LTGT | PERL_PV_PRETTY_NOCLEAR ); } else if (k == TRIE) { /* print the details of the trie in dumpuntil instead, as * progi->data isn't available here */ const char op = OP(o); const U32 n = ARG(o); const reg_ac_data * const ac = IS_TRIE_AC(op) ? (reg_ac_data *)progi->data->data[n] : NULL; const reg_trie_data * const trie = (reg_trie_data*)progi->data->data[!IS_TRIE_AC(op) ? n : ac->trie]; Perl_sv_catpvf(aTHX_ sv, "-%s",PL_reg_name[o->flags]); DEBUG_TRIE_COMPILE_r( Perl_sv_catpvf(aTHX_ sv, "", (UV)trie->startstate, (IV)trie->statecount-1, /* -1 because of the unused 0 element */ (UV)trie->wordcount, (UV)trie->minlen, (UV)trie->maxlen, (UV)TRIE_CHARCOUNT(trie), (UV)trie->uniquecharcount ) ); if ( IS_ANYOF_TRIE(op) || trie->bitmap ) { int i; int rangestart = -1; U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie); sv_catpvs(sv, "["); for (i = 0; i <= 256; i++) { if (i < 256 && BITMAP_TEST(bitmap,i)) { if (rangestart == -1) rangestart = i; } else if (rangestart != -1) { if (i <= rangestart + 3) for (; rangestart < i; rangestart++) put_byte(sv, rangestart); else { put_byte(sv, rangestart); sv_catpvs(sv, "-"); put_byte(sv, i - 1); } rangestart = -1; } } sv_catpvs(sv, "]"); } } else if (k == CURLY) { if (OP(o) == CURLYM || OP(o) == CURLYN || OP(o) == CURLYX) Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* Parenth number */ Perl_sv_catpvf(aTHX_ sv, " {%d,%d}", ARG1(o), ARG2(o)); } else if (k == WHILEM && o->flags) /* Ordinal/of */ Perl_sv_catpvf(aTHX_ sv, "[%d/%d]", o->flags & 0xf, o->flags>>4); else if (k == REF || k == OPEN || k == CLOSE || k == GROUPP || OP(o)==ACCEPT) { Perl_sv_catpvf(aTHX_ sv, "%d", (int)ARG(o)); /* Parenth number */ if ( RXp_PAREN_NAMES(prog) ) { if ( k != REF || (OP(o) < NREF)) { AV *list= MUTABLE_AV(progi->data->data[progi->name_list_idx]); SV **name= av_fetch(list, ARG(o), 0 ); if (name) Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name)); } else { AV *list= MUTABLE_AV(progi->data->data[ progi->name_list_idx ]); SV *sv_dat= MUTABLE_SV(progi->data->data[ ARG( o ) ]); I32 *nums=(I32*)SvPVX(sv_dat); SV **name= av_fetch(list, nums[0], 0 ); I32 n; if (name) { for ( n=0; nflags) Perl_sv_catpvf(aTHX_ sv, ":%"SVf, SVfARG((MUTABLE_SV(progi->data->data[ ARG( o ) ])))); } else if (k == LOGICAL) Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */ else if (k == ANYOF) { int i, rangestart = -1; const U8 flags = ANYOF_FLAGS(o); int do_sep = 0; if (flags & ANYOF_LOCALE) sv_catpvs(sv, "{loc}"); if (flags & ANYOF_LOC_FOLD) sv_catpvs(sv, "{i}"); Perl_sv_catpvf(aTHX_ sv, "[%s", PL_colors[0]); if (flags & ANYOF_INVERT) sv_catpvs(sv, "^"); /* output what the standard cp 0-255 bitmap matches */ for (i = 0; i <= 256; i++) { if (i < 256 && ANYOF_BITMAP_TEST(o,i)) { if (rangestart == -1) rangestart = i; } else if (rangestart != -1) { if (i <= rangestart + 3) for (; rangestart < i; rangestart++) put_byte(sv, rangestart); else { put_byte(sv, rangestart); sv_catpvs(sv, "-"); put_byte(sv, i - 1); } do_sep = 1; rangestart = -1; } } EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags); /* output any special charclass tests (used entirely under use locale) */ if (ANYOF_CLASS_TEST_ANY_SET(o)) for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++) if (ANYOF_CLASS_TEST(o,i)) { sv_catpv(sv, anyofs[i]); do_sep = 1; } EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags); if (flags & ANYOF_NON_UTF8_LATIN1_ALL) { sv_catpvs(sv, "{non-utf8-latin1-all}"); } /* output information about the unicode matching */ if (flags & ANYOF_UNICODE_ALL) sv_catpvs(sv, "{unicode_all}"); else if (ANYOF_NONBITMAP(o)) sv_catpvs(sv, "{unicode}"); if (flags & ANYOF_NONBITMAP_NON_UTF8) sv_catpvs(sv, "{outside bitmap}"); if (ANYOF_NONBITMAP(o)) { SV *lv; /* Set if there is something outside the bit map */ SV * const sw = regclass_swash(prog, o, FALSE, &lv, NULL); bool byte_output = FALSE; /* If something in the bitmap has been output */ if (lv && lv != &PL_sv_undef) { if (sw) { U8 s[UTF8_MAXBYTES_CASE+1]; for (i = 0; i <= 256; i++) { /* Look at chars in bitmap */ uvchr_to_utf8(s, i); if (i < 256 && ! ANYOF_BITMAP_TEST(o, i) /* Don't duplicate things already output as part of the bitmap */ && swash_fetch(sw, s, TRUE)) { if (rangestart == -1) rangestart = i; } else if (rangestart != -1) { byte_output = TRUE; if (i <= rangestart + 3) for (; rangestart < i; rangestart++) { put_byte(sv, rangestart); } else { put_byte(sv, rangestart); sv_catpvs(sv, "-"); put_byte(sv, i-1); } rangestart = -1; } } } { char *s = savesvpv(lv); char * const origs = s; while (*s && *s != '\n') s++; if (*s == '\n') { const char * const t = ++s; if (byte_output) { sv_catpvs(sv, " "); } while (*s) { if (*s == '\n') { /* Truncate very long output */ if (s - origs > 256) { Perl_sv_catpvf(aTHX_ sv, "%.*s...", (int) (s - origs - 1), t); goto out_dump; } *s = ' '; } else if (*s == '\t') { *s = '-'; } s++; } if (s[-1] == ' ') s[-1] = 0; sv_catpv(sv, t); } out_dump: Safefree(origs); } SvREFCNT_dec(lv); } } Perl_sv_catpvf(aTHX_ sv, "%s]", PL_colors[1]); } else if (k == POSIXD) { U8 index = FLAGS(o) * 2; if (index > (sizeof(anyofs) / sizeof(anyofs[0]))) { Perl_sv_catpvf(aTHX_ sv, "[illegal type=%d])", index); } else { sv_catpv(sv, anyofs[index]); } } else if (k == BRANCHJ && (OP(o) == UNLESSM || OP(o) == IFMATCH)) Perl_sv_catpvf(aTHX_ sv, "[%d]", -(o->flags)); #else PERL_UNUSED_CONTEXT; PERL_UNUSED_ARG(sv); PERL_UNUSED_ARG(o); PERL_UNUSED_ARG(prog); #endif /* DEBUGGING */ } SV * Perl_re_intuit_string(pTHX_ REGEXP * const r) { /* Assume that RE_INTUIT is set */ dVAR; struct regexp *const prog = (struct regexp *)SvANY(r); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_RE_INTUIT_STRING; PERL_UNUSED_CONTEXT; DEBUG_COMPILE_r( { const char * const s = SvPV_nolen_const(prog->check_substr ? prog->check_substr : prog->check_utf8); if (!PL_colorset) reginitcolors(); PerlIO_printf(Perl_debug_log, "%sUsing REx %ssubstr:%s \"%s%.60s%s%s\"\n", PL_colors[4], prog->check_substr ? "" : "utf8 ", PL_colors[5],PL_colors[0], s, PL_colors[1], (strlen(s) > 60 ? "..." : "")); } ); return prog->check_substr ? prog->check_substr : prog->check_utf8; } /* pregfree() handles refcounting and freeing the perl core regexp structure. When it is necessary to actually free the structure the first thing it does is call the 'free' method of the regexp_engine associated to the regexp, allowing the handling of the void *pprivate; member first. (This routine is not overridable by extensions, which is why the extensions free is called first.) See regdupe and regdupe_internal if you change anything here. */ #ifndef PERL_IN_XSUB_RE void Perl_pregfree(pTHX_ REGEXP *r) { SvREFCNT_dec(r); } void Perl_pregfree2(pTHX_ REGEXP *rx) { dVAR; struct regexp *const r = (struct regexp *)SvANY(rx); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_PREGFREE2; if (r->mother_re) { ReREFCNT_dec(r->mother_re); } else { CALLREGFREE_PVT(rx); /* free the private data */ SvREFCNT_dec(RXp_PAREN_NAMES(r)); } if (r->substrs) { SvREFCNT_dec(r->anchored_substr); SvREFCNT_dec(r->anchored_utf8); SvREFCNT_dec(r->float_substr); SvREFCNT_dec(r->float_utf8); Safefree(r->substrs); } RX_MATCH_COPY_FREE(rx); #ifdef PERL_OLD_COPY_ON_WRITE SvREFCNT_dec(r->saved_copy); #endif Safefree(r->offs); SvREFCNT_dec(r->qr_anoncv); } /* reg_temp_copy() This is a hacky workaround to the structural issue of match results being stored in the regexp structure which is in turn stored in PL_curpm/PL_reg_curpm. The problem is that due to qr// the pattern could be PL_curpm in multiple contexts, and could require multiple result sets being associated with the pattern simultaneously, such as when doing a recursive match with (??{$qr}) The solution is to make a lightweight copy of the regexp structure when a qr// is returned from the code executed by (??{$qr}) this lightweight copy doesn't actually own any of its data except for the starp/end and the actual regexp structure itself. */ REGEXP * Perl_reg_temp_copy (pTHX_ REGEXP *ret_x, REGEXP *rx) { struct regexp *ret; struct regexp *const r = (struct regexp *)SvANY(rx); PERL_ARGS_ASSERT_REG_TEMP_COPY; if (!ret_x) ret_x = (REGEXP*) newSV_type(SVt_REGEXP); ret = (struct regexp *)SvANY(ret_x); (void)ReREFCNT_inc(rx); /* We can take advantage of the existing "copied buffer" mechanism in SVs by pointing directly at the buffer, but flagging that the allocated space in the copy is zero. As we've just done a struct copy, it's now a case of zero-ing that, rather than copying the current length. */ SvPV_set(ret_x, RX_WRAPPED(rx)); SvFLAGS(ret_x) |= SvFLAGS(rx) & (SVf_POK|SVp_POK|SVf_UTF8); memcpy(&(ret->xpv_cur), &(r->xpv_cur), sizeof(regexp) - STRUCT_OFFSET(regexp, xpv_cur)); SvLEN_set(ret_x, 0); SvSTASH_set(ret_x, NULL); SvMAGIC_set(ret_x, NULL); if (r->offs) { const I32 npar = r->nparens+1; Newx(ret->offs, npar, regexp_paren_pair); Copy(r->offs, ret->offs, npar, regexp_paren_pair); } if (r->substrs) { Newx(ret->substrs, 1, struct reg_substr_data); StructCopy(r->substrs, ret->substrs, struct reg_substr_data); SvREFCNT_inc_void(ret->anchored_substr); SvREFCNT_inc_void(ret->anchored_utf8); SvREFCNT_inc_void(ret->float_substr); SvREFCNT_inc_void(ret->float_utf8); /* check_substr and check_utf8, if non-NULL, point to either their anchored or float namesakes, and don't hold a second reference. */ } RX_MATCH_COPIED_off(ret_x); #ifdef PERL_OLD_COPY_ON_WRITE ret->saved_copy = NULL; #endif ret->mother_re = rx; SvREFCNT_inc_void(ret->qr_anoncv); return ret_x; } #endif /* regfree_internal() Free the private data in a regexp. This is overloadable by extensions. Perl takes care of the regexp structure in pregfree(), this covers the *pprivate pointer which technically perl doesn't know about, however of course we have to handle the regexp_internal structure when no extension is in use. Note this is called before freeing anything in the regexp structure. */ void Perl_regfree_internal(pTHX_ REGEXP * const rx) { dVAR; struct regexp *const r = (struct regexp *)SvANY(rx); RXi_GET_DECL(r,ri); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_REGFREE_INTERNAL; DEBUG_COMPILE_r({ if (!PL_colorset) reginitcolors(); { SV *dsv= sv_newmortal(); RE_PV_QUOTED_DECL(s, RX_UTF8(rx), dsv, RX_PRECOMP(rx), RX_PRELEN(rx), 60); PerlIO_printf(Perl_debug_log,"%sFreeing REx:%s %s\n", PL_colors[4],PL_colors[5],s); } }); #ifdef RE_TRACK_PATTERN_OFFSETS if (ri->u.offsets) Safefree(ri->u.offsets); /* 20010421 MJD */ #endif if (ri->code_blocks) { int n; for (n = 0; n < ri->num_code_blocks; n++) SvREFCNT_dec(ri->code_blocks[n].src_regex); Safefree(ri->code_blocks); } if (ri->data) { int n = ri->data->count; while (--n >= 0) { /* If you add a ->what type here, update the comment in regcomp.h */ switch (ri->data->what[n]) { case 'a': case 'r': case 's': case 'S': case 'u': SvREFCNT_dec(MUTABLE_SV(ri->data->data[n])); break; case 'f': Safefree(ri->data->data[n]); break; case 'l': case 'L': break; case 'T': { /* Aho Corasick add-on structure for a trie node. Used in stclass optimization only */ U32 refcount; reg_ac_data *aho=(reg_ac_data*)ri->data->data[n]; OP_REFCNT_LOCK; refcount = --aho->refcount; OP_REFCNT_UNLOCK; if ( !refcount ) { PerlMemShared_free(aho->states); PerlMemShared_free(aho->fail); /* do this last!!!! */ PerlMemShared_free(ri->data->data[n]); PerlMemShared_free(ri->regstclass); } } break; case 't': { /* trie structure. */ U32 refcount; reg_trie_data *trie=(reg_trie_data*)ri->data->data[n]; OP_REFCNT_LOCK; refcount = --trie->refcount; OP_REFCNT_UNLOCK; if ( !refcount ) { PerlMemShared_free(trie->charmap); PerlMemShared_free(trie->states); PerlMemShared_free(trie->trans); if (trie->bitmap) PerlMemShared_free(trie->bitmap); if (trie->jump) PerlMemShared_free(trie->jump); PerlMemShared_free(trie->wordinfo); /* do this last!!!! */ PerlMemShared_free(ri->data->data[n]); } } break; default: Perl_croak(aTHX_ "panic: regfree data code '%c'", ri->data->what[n]); } } Safefree(ri->data->what); Safefree(ri->data); } Safefree(ri); } #define av_dup_inc(s,t) MUTABLE_AV(sv_dup_inc((const SV *)s,t)) #define hv_dup_inc(s,t) MUTABLE_HV(sv_dup_inc((const SV *)s,t)) #define SAVEPVN(p,n) ((p) ? savepvn(p,n) : NULL) /* re_dup - duplicate a regexp. This routine is expected to clone a given regexp structure. It is only compiled under USE_ITHREADS. After all of the core data stored in struct regexp is duplicated the regexp_engine.dupe method is used to copy any private data stored in the *pprivate pointer. This allows extensions to handle any duplication it needs to do. See pregfree() and regfree_internal() if you change anything here. */ #if defined(USE_ITHREADS) #ifndef PERL_IN_XSUB_RE void Perl_re_dup_guts(pTHX_ const REGEXP *sstr, REGEXP *dstr, CLONE_PARAMS *param) { dVAR; I32 npar; const struct regexp *r = (const struct regexp *)SvANY(sstr); struct regexp *ret = (struct regexp *)SvANY(dstr); PERL_ARGS_ASSERT_RE_DUP_GUTS; npar = r->nparens+1; Newx(ret->offs, npar, regexp_paren_pair); Copy(r->offs, ret->offs, npar, regexp_paren_pair); if(ret->swap) { /* no need to copy these */ Newx(ret->swap, npar, regexp_paren_pair); } if (ret->substrs) { /* Do it this way to avoid reading from *r after the StructCopy(). That way, if any of the sv_dup_inc()s dislodge *r from the L1 cache, it doesn't matter. */ const bool anchored = r->check_substr ? r->check_substr == r->anchored_substr : r->check_utf8 == r->anchored_utf8; Newx(ret->substrs, 1, struct reg_substr_data); StructCopy(r->substrs, ret->substrs, struct reg_substr_data); ret->anchored_substr = sv_dup_inc(ret->anchored_substr, param); ret->anchored_utf8 = sv_dup_inc(ret->anchored_utf8, param); ret->float_substr = sv_dup_inc(ret->float_substr, param); ret->float_utf8 = sv_dup_inc(ret->float_utf8, param); /* check_substr and check_utf8, if non-NULL, point to either their anchored or float namesakes, and don't hold a second reference. */ if (ret->check_substr) { if (anchored) { assert(r->check_utf8 == r->anchored_utf8); ret->check_substr = ret->anchored_substr; ret->check_utf8 = ret->anchored_utf8; } else { assert(r->check_substr == r->float_substr); assert(r->check_utf8 == r->float_utf8); ret->check_substr = ret->float_substr; ret->check_utf8 = ret->float_utf8; } } else if (ret->check_utf8) { if (anchored) { ret->check_utf8 = ret->anchored_utf8; } else { ret->check_utf8 = ret->float_utf8; } } } RXp_PAREN_NAMES(ret) = hv_dup_inc(RXp_PAREN_NAMES(ret), param); ret->qr_anoncv = MUTABLE_CV(sv_dup_inc((const SV *)ret->qr_anoncv, param)); if (ret->pprivate) RXi_SET(ret,CALLREGDUPE_PVT(dstr,param)); if (RX_MATCH_COPIED(dstr)) ret->subbeg = SAVEPVN(ret->subbeg, ret->sublen); else ret->subbeg = NULL; #ifdef PERL_OLD_COPY_ON_WRITE ret->saved_copy = NULL; #endif if (ret->mother_re) { if (SvPVX_const(dstr) == SvPVX_const(ret->mother_re)) { /* Our storage points directly to our mother regexp, but that's 1: a buffer in a different thread 2: something we no longer hold a reference on so we need to copy it locally. */ /* Note we need to use SvCUR(), rather than SvLEN(), on our mother_re, because it, in turn, may well be pointing to its own mother_re. */ SvPV_set(dstr, SAVEPVN(SvPVX_const(ret->mother_re), SvCUR(ret->mother_re)+1)); SvLEN_set(dstr, SvCUR(ret->mother_re)+1); } ret->mother_re = NULL; } ret->gofs = 0; } #endif /* PERL_IN_XSUB_RE */ /* regdupe_internal() This is the internal complement to regdupe() which is used to copy the structure pointed to by the *pprivate pointer in the regexp. This is the core version of the extension overridable cloning hook. The regexp structure being duplicated will be copied by perl prior to this and will be provided as the regexp *r argument, however with the /old/ structures pprivate pointer value. Thus this routine may override any copying normally done by perl. It returns a pointer to the new regexp_internal structure. */ void * Perl_regdupe_internal(pTHX_ REGEXP * const rx, CLONE_PARAMS *param) { dVAR; struct regexp *const r = (struct regexp *)SvANY(rx); regexp_internal *reti; int len; RXi_GET_DECL(r,ri); PERL_ARGS_ASSERT_REGDUPE_INTERNAL; len = ProgLen(ri); Newxc(reti, sizeof(regexp_internal) + len*sizeof(regnode), char, regexp_internal); Copy(ri->program, reti->program, len+1, regnode); reti->num_code_blocks = ri->num_code_blocks; if (ri->code_blocks) { int n; Newxc(reti->code_blocks, ri->num_code_blocks, struct reg_code_block, struct reg_code_block); Copy(ri->code_blocks, reti->code_blocks, ri->num_code_blocks, struct reg_code_block); for (n = 0; n < ri->num_code_blocks; n++) reti->code_blocks[n].src_regex = (REGEXP*) sv_dup_inc((SV*)(ri->code_blocks[n].src_regex), param); } else reti->code_blocks = NULL; reti->regstclass = NULL; if (ri->data) { struct reg_data *d; const int count = ri->data->count; int i; Newxc(d, sizeof(struct reg_data) + count*sizeof(void *), char, struct reg_data); Newx(d->what, count, U8); d->count = count; for (i = 0; i < count; i++) { d->what[i] = ri->data->what[i]; switch (d->what[i]) { /* see also regcomp.h and regfree_internal() */ case 'a': /* actually an AV, but the dup function is identical. */ case 'r': case 's': case 'S': case 'u': /* actually an HV, but the dup function is identical. */ d->data[i] = sv_dup_inc((const SV *)ri->data->data[i], param); break; case 'f': /* This is cheating. */ Newx(d->data[i], 1, struct regnode_charclass_class); StructCopy(ri->data->data[i], d->data[i], struct regnode_charclass_class); reti->regstclass = (regnode*)d->data[i]; break; case 'T': /* Trie stclasses are readonly and can thus be shared * without duplication. We free the stclass in pregfree * when the corresponding reg_ac_data struct is freed. */ reti->regstclass= ri->regstclass; /* Fall through */ case 't': OP_REFCNT_LOCK; ((reg_trie_data*)ri->data->data[i])->refcount++; OP_REFCNT_UNLOCK; /* Fall through */ case 'l': case 'L': d->data[i] = ri->data->data[i]; break; default: Perl_croak(aTHX_ "panic: re_dup unknown data code '%c'", ri->data->what[i]); } } reti->data = d; } else reti->data = NULL; reti->name_list_idx = ri->name_list_idx; #ifdef RE_TRACK_PATTERN_OFFSETS if (ri->u.offsets) { Newx(reti->u.offsets, 2*len+1, U32); Copy(ri->u.offsets, reti->u.offsets, 2*len+1, U32); } #else SetProgLen(reti,len); #endif return (void*)reti; } #endif /* USE_ITHREADS */ #ifndef PERL_IN_XSUB_RE /* - regnext - dig the "next" pointer out of a node */ regnode * Perl_regnext(pTHX_ register regnode *p) { dVAR; I32 offset; if (!p) return(NULL); if (OP(p) > REGNODE_MAX) { /* regnode.type is unsigned */ Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(p), (int)REGNODE_MAX); } offset = (reg_off_by_arg[OP(p)] ? ARG(p) : NEXT_OFF(p)); if (offset == 0) return(NULL); return(p+offset); } #endif STATIC void S_re_croak2(pTHX_ const char* pat1,const char* pat2,...) { va_list args; STRLEN l1 = strlen(pat1); STRLEN l2 = strlen(pat2); char buf[512]; SV *msv; const char *message; PERL_ARGS_ASSERT_RE_CROAK2; if (l1 > 510) l1 = 510; if (l1 + l2 > 510) l2 = 510 - l1; Copy(pat1, buf, l1 , char); Copy(pat2, buf + l1, l2 , char); buf[l1 + l2] = '\n'; buf[l1 + l2 + 1] = '\0'; #ifdef I_STDARG /* ANSI variant takes additional second argument */ va_start(args, pat2); #else va_start(args); #endif msv = vmess(buf, &args); va_end(args); message = SvPV_const(msv,l1); if (l1 > 512) l1 = 512; Copy(message, buf, l1 , char); buf[l1-1] = '\0'; /* Overwrite \n */ Perl_croak(aTHX_ "%s", buf); } /* XXX Here's a total kludge. But we need to re-enter for swash routines. */ #ifndef PERL_IN_XSUB_RE void Perl_save_re_context(pTHX) { dVAR; struct re_save_state *state; SAVEVPTR(PL_curcop); SSGROW(SAVESTACK_ALLOC_FOR_RE_SAVE_STATE + 1); state = (struct re_save_state *)(PL_savestack + PL_savestack_ix); PL_savestack_ix += SAVESTACK_ALLOC_FOR_RE_SAVE_STATE; SSPUSHUV(SAVEt_RE_STATE); Copy(&PL_reg_state, state, 1, struct re_save_state); PL_reg_oldsaved = NULL; PL_reg_oldsavedlen = 0; PL_reg_oldsavedoffset = 0; PL_reg_oldsavedcoffset = 0; PL_reg_maxiter = 0; PL_reg_leftiter = 0; PL_reg_poscache = NULL; PL_reg_poscache_size = 0; #ifdef PERL_OLD_COPY_ON_WRITE PL_nrs = NULL; #endif /* Save $1..$n (#18107: UTF-8 s/(\w+)/uc($1)/e); AMS 20021106. */ if (PL_curpm) { const REGEXP * const rx = PM_GETRE(PL_curpm); if (rx) { U32 i; for (i = 1; i <= RX_NPARENS(rx); i++) { char digits[TYPE_CHARS(long)]; const STRLEN len = my_snprintf(digits, sizeof(digits), "%lu", (long)i); GV *const *const gvp = (GV**)hv_fetch(PL_defstash, digits, len, 0); if (gvp) { GV * const gv = *gvp; if (SvTYPE(gv) == SVt_PVGV && GvSV(gv)) save_scalar(gv); } } } } } #endif static void clear_re(pTHX_ void *r) { dVAR; ReREFCNT_dec((REGEXP *)r); } #ifdef DEBUGGING STATIC void S_put_byte(pTHX_ SV *sv, int c) { PERL_ARGS_ASSERT_PUT_BYTE; /* Our definition of isPRINT() ignores locales, so only bytes that are not part of UTF-8 are considered printable. I assume that the same holds for UTF-EBCDIC. Also, code point 255 is not printable in either (it's E0 in EBCDIC, which Wikipedia says: EO, or Eight Ones, is an 8-bit EBCDIC character code represented as all ones (binary 1111 1111, hexadecimal FF). It is similar, but not identical, to the ASCII delete (DEL) or rubout control character. ) So the old condition can be simplified to !isPRINT(c) */ if (!isPRINT(c)) { if (c < 256) { Perl_sv_catpvf(aTHX_ sv, "\\x%02x", c); } else { Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c); } } else { const char string = c; if (c == '-' || c == ']' || c == '\\' || c == '^') sv_catpvs(sv, "\\"); sv_catpvn(sv, &string, 1); } } #define CLEAR_OPTSTART \ if (optstart) STMT_START { \ DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log, " (%"IVdf" nodes)\n", (IV)(node - optstart))); \ optstart=NULL; \ } STMT_END #define DUMPUNTIL(b,e) CLEAR_OPTSTART; node=dumpuntil(r,start,(b),(e),last,sv,indent+1,depth+1); STATIC const regnode * S_dumpuntil(pTHX_ const regexp *r, const regnode *start, const regnode *node, const regnode *last, const regnode *plast, SV* sv, I32 indent, U32 depth) { dVAR; U8 op = PSEUDO; /* Arbitrary non-END op. */ const regnode *next; const regnode *optstart= NULL; RXi_GET_DECL(r,ri); GET_RE_DEBUG_FLAGS_DECL; PERL_ARGS_ASSERT_DUMPUNTIL; #ifdef DEBUG_DUMPUNTIL PerlIO_printf(Perl_debug_log, "--- %d : %d - %d - %d\n",indent,node-start, last ? last-start : 0,plast ? plast-start : 0); #endif if (plast && plast < last) last= plast; while (PL_regkind[op] != END && (!last || node < last)) { /* While that wasn't END last time... */ NODE_ALIGN(node); op = OP(node); if (op == CLOSE || op == WHILEM) indent--; next = regnext((regnode *)node); /* Where, what. */ if (OP(node) == OPTIMIZED) { if (!optstart && RE_DEBUG_FLAG(RE_DEBUG_COMPILE_OPTIMISE)) optstart = node; else goto after_print; } else CLEAR_OPTSTART; regprop(r, sv, node); PerlIO_printf(Perl_debug_log, "%4"IVdf":%*s%s", (IV)(node - start), (int)(2*indent + 1), "", SvPVX_const(sv)); if (OP(node) != OPTIMIZED) { if (next == NULL) /* Next ptr. */ PerlIO_printf(Perl_debug_log, " (0)"); else if (PL_regkind[(U8)op] == BRANCH && PL_regkind[OP(next)] != BRANCH ) PerlIO_printf(Perl_debug_log, " (FAIL)"); else PerlIO_printf(Perl_debug_log, " (%"IVdf")", (IV)(next - start)); (void)PerlIO_putc(Perl_debug_log, '\n'); } after_print: if (PL_regkind[(U8)op] == BRANCHJ) { assert(next); { const regnode *nnode = (OP(next) == LONGJMP ? regnext((regnode *)next) : next); if (last && nnode > last) nnode = last; DUMPUNTIL(NEXTOPER(NEXTOPER(node)), nnode); } } else if (PL_regkind[(U8)op] == BRANCH) { assert(next); DUMPUNTIL(NEXTOPER(node), next); } else if ( PL_regkind[(U8)op] == TRIE ) { const regnode *this_trie = node; const char op = OP(node); const U32 n = ARG(node); const reg_ac_data * const ac = op>=AHOCORASICK ? (reg_ac_data *)ri->data->data[n] : NULL; const reg_trie_data * const trie = (reg_trie_data*)ri->data->data[optrie]; #ifdef DEBUGGING AV *const trie_words = MUTABLE_AV(ri->data->data[n + TRIE_WORDS_OFFSET]); #endif const regnode *nextbranch= NULL; I32 word_idx; sv_setpvs(sv, ""); for (word_idx= 0; word_idx < (I32)trie->wordcount; word_idx++) { SV ** const elem_ptr = av_fetch(trie_words,word_idx,0); PerlIO_printf(Perl_debug_log, "%*s%s ", (int)(2*(indent+3)), "", elem_ptr ? pv_pretty(sv, SvPV_nolen_const(*elem_ptr), SvCUR(*elem_ptr), 60, PL_colors[0], PL_colors[1], (SvUTF8(*elem_ptr) ? PERL_PV_ESCAPE_UNI : 0) | PERL_PV_PRETTY_ELLIPSES | PERL_PV_PRETTY_LTGT ) : "???" ); if (trie->jump) { U16 dist= trie->jump[word_idx+1]; PerlIO_printf(Perl_debug_log, "(%"UVuf")\n", (UV)((dist ? this_trie + dist : next) - start)); if (dist) { if (!nextbranch) nextbranch= this_trie + trie->jump[0]; DUMPUNTIL(this_trie + dist, nextbranch); } if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH) nextbranch= regnext((regnode *)nextbranch); } else { PerlIO_printf(Perl_debug_log, "\n"); } } if (last && next > last) node= last; else node= next; } else if ( op == CURLY ) { /* "next" might be very big: optimizer */ DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS, NEXTOPER(node) + EXTRA_STEP_2ARGS + 1); } else if (PL_regkind[(U8)op] == CURLY && op != CURLYX) { assert(next); DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS, next); } else if ( op == PLUS || op == STAR) { DUMPUNTIL(NEXTOPER(node), NEXTOPER(node) + 1); } else if (PL_regkind[(U8)op] == ANYOF) { /* arglen 1 + class block */ node += 1 + ((ANYOF_FLAGS(node) & ANYOF_CLASS) ? ANYOF_CLASS_SKIP : ANYOF_SKIP); node = NEXTOPER(node); } else if (PL_regkind[(U8)op] == EXACT) { /* Literal string, where present. */ node += NODE_SZ_STR(node) - 1; node = NEXTOPER(node); } else { node = NEXTOPER(node); node += regarglen[(U8)op]; } if (op == CURLYX || op == OPEN) indent++; } CLEAR_OPTSTART; #ifdef DEBUG_DUMPUNTIL PerlIO_printf(Perl_debug_log, "--- %d\n", (int)indent); #endif return node; } #endif /* DEBUGGING */ /* * Local variables: * c-indentation-style: bsd * c-basic-offset: 4 * indent-tabs-mode: nil * End: * * ex: set ts=8 sts=4 sw=4 et: */