#!/usr/bin/perl # # regen_perly.pl, DAPM 12-Feb-04 # # Copyright (c) 2004, 2005 Larry Wall # # Given an input file perly.y, run bison on it and produce # the following output files: # # perly.h standard bison header file with minor doctoring of # #line directives plus adding a #ifdef PERL_CORE # # perly.tab the parser table C definitions extracted from the bison output # plus an extra table generated by this script. # # perly.act the action case statements extracted from the bison output # # Note that perly.c is *not* regenerated - this is now a static file which # is not dependent on perly.y any more. # # If a filename of the form foo.y is given on the command line, then # this is used instead as the basename for all the files mentioned # above. # # Note that temporary files of the form perlytmp.h and perlytmp.c are # created and then deleted during this process # # Note also that this script is intended to be run on a UNIX system; # it may work elsewhere but no specific attempt has been made to make it # portable. sub usage { die "usage: $0 [ -b bison_executable ] [ file.y ]\n" } use warnings; use strict; BEGIN { require 'regen/regen_lib.pl'; } my $bison = 'bison'; if (@ARGV >= 2 and $ARGV[0] eq '-b') { shift; $bison = shift; } my $y_file = shift || 'perly.y'; usage unless @ARGV==0 && $y_file =~ /\.y$/; (my $h_file = $y_file) =~ s/\.y$/.h/; (my $act_file = $y_file) =~ s/\.y$/.act/; (my $tab_file = $y_file) =~ s/\.y$/.tab/; (my $tmpc_file = $y_file) =~ s/\.y$/tmp.c/; (my $tmph_file = $y_file) =~ s/\.y$/tmp.h/; my $new_h_file = "$h_file-new"; my $new_act_file = "$act_file-new"; my $new_tab_file = "$tab_file-new"; # the yytranslate[] table generated by bison is ASCII/EBCDIC sensitive die "$0: must be run on an ASCII system\n" unless ord 'A' == 65; # check for correct version number. The constraints are: # * must be >= 1.24 to avoid licensing issues. # * it must generate the yystos[] table. Version 1.28 doesn't generate # this; 1.35+ does # * Must produce output which is extractable by the regexes below # * Must produce the right values. # These last two constraints may well be met by earlier versions, but # I simply haven't tested them yet. If it works for you, then modify # the test below to allow that version too. DAPM Feb 04. my $version = `$bison -V`; unless ($version) { die <; } die "failed to read $tmpc_file: length mismatch\n" unless length $clines == -s $tmpc_file; close CTMPFILE; my ($actlines, $tablines) = extract($clines); $tablines .= make_type_tab($y_file, $tablines); chmod 0644, $new_act_file; open ACTFILE, ">$new_act_file" or die "can't open $new_act_file: $!\n"; print ACTFILE $actlines; close ACTFILE; chmod 0444, $new_act_file; chmod 0644, $new_tab_file; open TABFILE, ">$new_tab_file" or die "can't open $new_tab_file: $!\n"; print TABFILE $tablines; close TABFILE; chmod 0444, $new_tab_file; unlink $tmpc_file; # Wrap PERL_CORE round the symbol definitions. Also, the # C<#line 30 "perly.y"> confuses the Win32 resource compiler and the # C<#line 188 "perlytmp.h"> gets picked up by make depend, so remove them. open TMPH_FILE, $tmph_file or die "Can't open $tmph_file: $!\n"; chmod 0644, $new_h_file; open H_FILE, ">$new_h_file" or die "Can't open $new_h_file: $!\n"; my $endcore_done = 0; # Token macros need to be generated manually on bison 2.4 my $gather_tokens = ($version =~ /\b2\.4\b/ ? undef : 0); my $tokens; while () { print H_FILE "#ifdef PERL_CORE\n" if $. == 1; if (!$endcore_done and /YYSTYPE_IS_DECLARED/) { print H_FILE "#endif /* PERL_CORE */\n"; $endcore_done = 1; } next if /^#line \d+ ".*"/; if (not defined $gather_tokens) { $gather_tokens = 1 if /^\s* enum \s* yytokentype \s* \{/x; } elsif ($gather_tokens) { if (/^\# \s* endif/x) { # The #endif just after the end of the token enum $gather_tokens = 0; $_ .= "\n/* Tokens. */\n$tokens"; } else { my ($tok, $val) = /(\w+) \s* = \s* (\d+)/x; $tokens .= "#define $tok $val\n" if $tok; } } print H_FILE $_; } close TMPH_FILE; close H_FILE; chmod 0444, $new_h_file; unlink $tmph_file; rename_if_different($new_h_file, $h_file); rename_if_different($new_tab_file, $tab_file); rename_if_different($new_act_file, $act_file); exit 0; sub extract { my $clines = shift; my $tablines; my $actlines; $clines =~ m@ (?: ^/* YYFINAL[^\n]+\n #optional comment )? \# \s* define \s* YYFINAL # first #define .*? # other defines + most tables yystos\[\]\s*= # start of last table .*? }\s*; # end of last table @xms or die "Can't extract tables from $tmpc_file\n"; $tablines = $&; $clines =~ m@ switch \s* \( \s* \w+ \s* \) \s* { \s* ( case \s* \d+ \s* : \s* (?: \s* /\* .*? \*/ \s* )* # optional C-comments \s* \#line [^\n]+"\Q$y_file\E" .*? ) } \s* (?: \s* /\* .*? \*/ \s* )* # optional C-comments \s* ( \#line[^\n]+\.c" | \#line[^\n]+\.simple" | YY_SYMBOL_PRINT ) @xms or die "Can't extract actions from $tmpc_file\n"; $actlines = $1; # Remove extraneous comments from bison 2.4 $actlines =~ s!\s* /\* \s* Line \s* \d+ \s* of \s* yacc\.c \s* \*/!!gx; # C<#line 188 "perlytmp.c"> gets picked up by make depend, so remove them. $actlines =~ s/^#line \d+ "\Q$tmpc_file\E".*$//gm; # convert yyvsp[nnn] into ps[nnn].val $actlines =~ s/yyvsp\[(.*?)\]/ps[$1].val/g or die "Can't convert value stack name\n"; return $actlines. "\n", $tablines. "\n"; } # Generate a table, yy_type_tab[], that specifies for each token, what # type of value it holds. # # Read the .y file and extract a list of all the token names and # non-terminal names; then scan the string $tablines for the table yytname, # which gives the token index of each token/non-terminal; then use this to # create yy_type_tab. # # ie given (in perly.y), # # %token A # %token B # %type C # %type D # # and (in $tablines), # # yytname[] = { "A" "B", "C", "D", "E" }; # # then return # # typedef enum { toketype_ival, toketype_opval, toketype_pval } toketypes; # # static const toketypes yy_type_tab[] # = { toketype_opval, toketype_ival, toketype_pval, # toketype_opval, toketype_ival } # # where "E" has the default type. The default type is determined # by the __DEFAULT__ comment next to the appropriate union member in # perly.y sub make_type_tab { my ($y_file, $tablines) = @_; my %tokens; my %types; my $default_token; open my $fh, '<', $y_file or die "Can't open $y_file: $!\n"; while (<$fh>) { if (/(\$\d+)\s*=/) { warn "$y_file:$.: dangerous assignment to $1: $_"; } if (/__DEFAULT__/) { m{(\w+) \s* ; \s* /\* \s* __DEFAULT__}x or die "$y_file: can't parse __DEFAULT__ line: $_"; die "$y_file: duplicate __DEFAULT__ line: $_" if defined $default_token; $default_token = $1; next; } next unless /^%(token|type)/; s/^%(token|type)\s+<(\w+)>\s+// or die "$y_file: unparseable token/type line: $_"; $tokens{$_} = $2 for (split ' ', $_); $types{$2} = 1; } die "$y_file: no __DEFAULT__ token defined\n" unless $default_token; $types{$default_token} = 1; $tablines =~ /^\Qstatic const char *const yytname[] =\E\n {\n (.*?) ^}; /xsm or die "Can't extract yytname[] from table string\n"; my $fields = $1; $fields =~ s{"([^"]+)"} { "toketype_" . (defined $tokens{$1} ? $tokens{$1} : $default_token) }ge; $fields =~ s/, \s* 0 \s* $//x or die "make_type_tab: couldn't delete trailing ',0'\n"; return "\ntypedef enum {\n\t" . join(", ", map "toketype_$_", sort keys %types) . "\n} toketypes;\n\n" . "/* type of each token/terminal */\n" . "static const toketypes yy_type_tab[] =\n{\n" . $fields . "\n};\n"; } sub my_system { system(@_); if ($? == -1) { die "failed to execute command '@_': $!\n"; } elsif ($? & 127) { die sprintf "command '@_' died with signal %d\n", ($? & 127); } elsif ($? >> 8) { die sprintf "command '@_' exited with value %d\n", $? >> 8; } }