/* * This file was produced by hand because the configure utilities which * are in the perl distribution are all shell scripts. Someday, I hope * we'll get a perl configure utility, but until then . . . * * Feel free to add or change things to suit your needs, but be careful * about moving the comments which say "config-skip" - they're used by * GenConfig.pl when producing Config.pm. * * config.h for VMS * Version: 5.004 */ /* Configuration time: 19-Nov-1996 23:34 * Configured by: Charles Bailey bailey@genetics.upenn.edu * Target system: VMS */ #ifndef _config_h_ #define _config_h_ /* CAT2: * This macro catenates 2 tokens together. */ /* STRINGIFY: * This macro surrounds its token with double quotes. */ #ifdef __STDC__ #define CAT2(a,b)a ## b #define CAT3(a,b,c)a ## b ## c #define CAT4(a,b,c,d)a ## b ## c ##d #define CAT5(a,b,c,d,e)a ## b ## c ## d ## e #define StGiFy(a) # a #define STRINGIFY(A)StGiFy(a) #define SCAT2(a,b)StGiFy(a) StGiFy(b) #define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c) #define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) #define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e) #else #define CAT2(a,b)a/**/b #define CAT3(a,b,c)a/**/b/**/c #define CAT4(a,b,c,d)a/**/b/**/c/**/d #define CAT5(a,b,c,d,e)a/**/b/**/c/**/d/**/e #define STRINGIFY(a)"a" #endif /* config-start */ /* MEM_ALIGNBYTES: * This symbol contains the number of bytes required to align a * double. Usual values are 2, 4 and 8. */ #define MEM_ALIGNBYTES 8 /**/ /* OSNAME: * This symbol contains the name of the operating system, as determined * by Configure. */ #define OSNAME "VMS" /**/ /* ARCHLIB: * This variable, if defined, holds the name of the directory in * which the user wants to put architecture-dependent public * library files for $package. It is most often a local directory * such as /usr/local/lib. Programs using this variable must be * prepared to deal with filename expansion. If ARCHLIB is the * same as PRIVLIB, it is not defined, since presumably the * program already searches PRIVLIB. */ /* ARCHLIB_EXP: * This symbol contains the ~name expanded version of ARCHLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ /* ==> NOTE <== * This value is automatically updated by FndVers.Com * when Perl is built. Please do not change it by hand; make * any changes to FndVers.Com instead. */ #define ARCHLIB_EXP "/perl_root/lib/VMS_VAX/5_00456" /**/ #define ARCHLIB ARCHLIB_EXP /*config-skip*/ /* ARCHNAME: * This symbol holds a string representing the architecture name. * It may be used to construct an architecture-dependant pathname * where library files may be held under a private library, for * instance. */ #define ARCHNAME "VMS_VAX" /**/ /* BINCOMPAT3: * This symbol, if defined, indicates that Perl 5.004 should be * binary-compatible with Perl 5.003. */ #undef BINCOMPAT3 /* CPPSTDIN: * This symbol contains the first part of the string which will invoke * the C preprocessor on the standard input and produce to standard * output. Typical value of "cc -E" or "/lib/cpp", but it can also * call a wrapper. See CPPRUN. */ /* CPPMINUS: * This symbol contains the second part of the string which will invoke * the C preprocessor on the standard input and produce to standard * output. This symbol will have the value "-" if CPPSTDIN needs a minus * to specify standard input, otherwise the value is "". */ #define CPPSTDIN "cc/noobj/preprocess=sys$output sys$input" #define CPPMINUS "" /* HAS_BCMP: * This symbol is defined if the bcmp() routine is available to * compare blocks of memory. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_BCMP /**/ #else #undef HAS_BCMP /*config-skip*/ #endif #include /* Check whether new DECC has #defined bcopy and bzero */ /* HAS_BCOPY: * This symbol is defined if the bcopy() routine is available to * copy blocks of memory. */ #undef HAS_BCOPY /**/ #ifdef bcopy # define HAS_BCOPY /*config-skip*/ #endif /* HAS_BZERO: * This symbol is defined if the bzero() routine is available to * set a memory block to 0. */ #undef HAS_BZERO /**/ #ifdef bzero # define HAS_BZERO /*config-skip*/ #endif /* CASTNEGFLOAT: * This symbol is defined if the C compiler can cast negative * numbers to unsigned longs, ints and shorts. */ /* CASTFLAGS: * This symbol contains flags that say what difficulties the compiler * has casting odd floating values to unsigned long: * 0 = ok * 1 = couldn't cast < 0 * 2 = couldn't cast >= 0x80000000 */ #define CASTNEGFLOAT /**/ #define CASTFLAGS 0 /**/ /* HAS_CHSIZE: * This symbol, if defined, indicates that the chsize routine is available * to truncate files. You might need a -lx to get this routine. */ #undef HAS_CHSIZE /**/ /* HASCONST: * This symbol, if defined, indicates that this C compiler knows about * the const type. There is no need to actually test for that symbol * within your programs. The mere use of the "const" keyword will * trigger the necessary tests. */ #define HASCONST /**/ /* HAS_CRYPT: * This symbol, if defined, indicates that the crypt routine is available * to encrypt passwords and the like. */ #define HAS_CRYPT /**/ /* BYTEORDER: * This symbol hold the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... */ #define BYTEORDER 0x1234 /* large digits for MSB */ /* CSH: * This symbol, if defined, indicates that the C-shell exists. * If defined, contains the full pathname of csh. */ #undef CSH /**/ /* HAS_DUP2: * This symbol, if defined, indicates that the dup2 routine is * available to duplicate file descriptors. */ #define HAS_DUP2 /**/ /* HAS_FCHMOD: * This symbol, if defined, indicates that the fchmod routine is available * to change mode of opened files. If unavailable, use chmod(). */ #undef HAS_FCHMOD /**/ /* HAS_FCHOWN: * This symbol, if defined, indicates that the fchown routine is available * to change ownership of opened files. If unavailable, use chown(). */ #undef HAS_FCHOWN /**/ /* HAS_FCNTL: * This symbol, if defined, indicates to the C program that * the fcntl() function exists. */ #undef HAS_FCNTL /**/ /* HAS_FGETPOS: * This symbol, if defined, indicates that the fgetpos routine is * available to get the file position indicator, similar to ftell(). */ #define HAS_FGETPOS /**/ /* FLEXFILENAMES: * This symbol, if defined, indicates that the system supports filenames * longer than 14 characters. */ #define FLEXFILENAMES /**/ /* HAS_FLOCK: * This symbol, if defined, indicates that the flock routine is * available to do file locking. */ #undef HAS_FLOCK /**/ /* HAS_FSETPOS: * This symbol, if defined, indicates that the fsetpos routine is * available to set the file position indicator, similar to fseek(). */ #define HAS_FSETPOS /**/ /* HAS_GETTIMEOFDAY: * This symbol, if defined, indicates that the gettimeofday() system * call is available for a sub-second accuracy clock. Usually, the file * needs to be included (see I_SYS_RESOURCE). * The type "Timeval" should be used to refer to "struct timeval". */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_GETTIMEOFDAY /**/ #else #undef HAS_GETTIMEOFDAY /*config-skip*/ #endif #ifdef HAS_GETTIMEOFDAY # define Timeval struct timeval /*config-skip*/ #endif /* HAS_GETGROUPS: * This symbol, if defined, indicates that the getgroups() routine is * available to get the list of process groups. If unavailable, multiple * groups are probably not supported. */ /* HAS_SETGROUPS: * This symbol, if defined, indicates that the setgroups() routine is * available to set the list of process groups. If unavailable, multiple * groups are probably not supported. */ #undef HAS_GETGROUPS /**/ #undef HAS_SETGROUPS /**/ /* HAS_UNAME: * This symbol, if defined, indicates that the C program may use the * uname() routine to derive the host name. See also HAS_GETHOSTNAME * and PHOSTNAME. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_UNAME /**/ #else #undef HAS_UNAME /*config-skip*/ #endif /* HAS_GETPRIORITY: * This symbol, if defined, indicates that the getpriority routine is * available to get a process's priority. */ #undef HAS_GETPRIORITY /**/ /* HAS_KILLPG: * This symbol, if defined, indicates that the killpg routine is available * to kill process groups. If unavailable, you probably should use kill * with a negative process number. */ #undef HAS_KILLPG /**/ /* HAS_LINK: * This symbol, if defined, indicates that the link routine is * available to create hard links. */ #undef HAS_LINK /**/ /* HAS_LSTAT: * This symbol, if defined, indicates that the lstat routine is * available to do file stats on symbolic links. */ #undef HAS_LSTAT /**/ /* HAS_LOCKF: * This symbol, if defined, indicates that the lockf routine is * available to do file locking. */ #undef HAS_LOCKF /**/ /* HAS_MBSTOWCS: * This symbol, if defined, indicates that the mbstowcs routine is * available to covert a multibyte string into a wide character string. */ #ifdef __DECC # define HAS_MBSTOWCS /*config-skip*/ #else # undef HAS_MBSTOWCS /*config-skip*/ #endif /* HAS_MBTOWC: * This symbol, if defined, indicates that the mbtowc routine is available * to covert a multibyte to a wide character. */ #ifdef __DECC # define HAS_MBTOWC /*config-skip*/ #else # undef HAS_MBTOWC /*config-skip*/ #endif /* HAS_MEMCMP: * This symbol, if defined, indicates that the memcmp routine is available * to compare blocks of memory. */ #define HAS_MEMCMP /**/ /* HAS_MEMCPY: * This symbol, if defined, indicates that the memcpy routine is available * to copy blocks of memory. */ #define HAS_MEMCPY /**/ /* HAS_MEMMOVE: * This symbol, if defined, indicates that the memmove routine is available * to copy potentially overlapping blocks of memory. This should be used * only when HAS_SAFE_BCOPY is not defined. If neither is there, roll your * own version. */ #define HAS_MEMMOVE /**/ /* HAS_MEMSET: * This symbol, if defined, indicates that the memset routine is available * to set blocks of memory. */ #define HAS_MEMSET /**/ /* HAS_MKDIR: * This symbol, if defined, indicates that the mkdir routine is available * to create directories. Otherwise you should fork off a new process to * exec /bin/mkdir. */ #define HAS_MKDIR /**/ /* HAS_MSG: * This symbol, if defined, indicates that the entire msg*(2) library is * supported (IPC mechanism based on message queues). */ #undef HAS_MSG /**/ /* HAS_OPEN3: * This manifest constant lets the C program know that the three * argument form of open(2) is available. */ #define HAS_OPEN3 /**/ /* HAS_POLL: * This symbol, if defined, indicates that the poll routine is * available to poll active file descriptors. */ #undef HAS_POLL /**/ /* HAS_PTHREAD_YIELD: * This symbol, if defined, indicates that the pthread_yield routine is * available to yield the execution of the current thread. * VMS: pthread_yield_np is there, but we won't worry for now since it's * set up already as sched_yield. */ #undef HAS_PTHREAD_YIELD /**/ /* HAS_SCHED_YIELD: * This symbol, if defined, indicates that the sched_yield routine is * available to yield the execution of the current thread. */ #define HAS_SCHED_YIELD /**/ /* HAS_READDIR: * This symbol, if defined, indicates that the readdir routine is * available to read directory entries. You may have to include * . See I_DIRENT. */ #define HAS_READDIR /**/ /* HAS_SEEKDIR: * This symbol, if defined, indicates that the seekdir routine is * available. You may have to include . See I_DIRENT. */ #define HAS_SEEKDIR /**/ /* HAS_TELLDIR: * This symbol, if defined, indicates that the telldir routine is * available. You may have to include . See I_DIRENT. */ #define HAS_TELLDIR /**/ /* HAS_REWINDDIR: * This symbol, if defined, indicates that the rewinddir routine is * available. You may have to include . See I_DIRENT. */ #define HAS_REWINDDIR /**/ /* HAS_RENAME: * This symbol, if defined, indicates that the rename routine is available * to rename files. Otherwise you should do the unlink(), link(), unlink() * trick. */ #define HAS_RENAME /**/ /* HAS_RMDIR: * This symbol, if defined, indicates that the rmdir routine is * available to remove directories. Otherwise you should fork off a * new process to exec /bin/rmdir. */ #define HAS_RMDIR /**/ /* HAS_SEM: * This symbol, if defined, indicates that the entire sem*(2) library is * supported. */ #undef HAS_SEM /**/ /* HAS_SETEGID: * This symbol, if defined, indicates that the setegid routine is available * to change the effective gid of the current program. */ #undef HAS_SETEGID /**/ /* HAS_SETEUID: * This symbol, if defined, indicates that the seteuid routine is available * to change the effective uid of the current program. */ #undef HAS_SETEUID /**/ /* HAS_SETPRIORITY: * This symbol, if defined, indicates that the setpriority routine is * available to set a process's priority. */ #undef HAS_SETPRIORITY /**/ /* HAS_SETREGID: * This symbol, if defined, indicates that the setregid routine is * available to change the real and effective gid of the current * process. */ /* HAS_SETRESGID: * This symbol, if defined, indicates that the setresgid routine is * available to change the real, effective and saved gid of the current * process. */ #undef HAS_SETREGID /**/ #undef HAS_SETRESGID /**/ /* HAS_SETREUID: * This symbol, if defined, indicates that the setreuid routine is * available to change the real and effective uid of the current * process. */ /* HAS_SETRESUID: * This symbol, if defined, indicates that the setresuid routine is * available to change the real, effective and saved uid of the current * process. */ #undef HAS_SETREUID /**/ #undef HAS_SETRESUID /**/ /* HAS_SETRGID: * This symbol, if defined, indicates that the setrgid routine is available * to change the real gid of the current program. */ #undef HAS_SETRGID /**/ /* HAS_SETRUID: * This symbol, if defined, indicates that the setruid routine is available * to change the real uid of the current program. */ #undef HAS_SETRUID /**/ /* HAS_SETSID: * This symbol, if defined, indicates that the setsid routine is * available to set the process group ID. */ #undef HAS_SETSID /**/ /* HAS_SHM: * This symbol, if defined, indicates that the entire shm*(2) library is * supported. */ #undef HAS_SHM /**/ /* Shmat_t: * This symbol holds the return type of the shmat() system call. * Usually set to 'void *' or 'char *'. */ /* HAS_SHMAT_PROTOTYPE: * This symbol, if defined, indicates that the sys/shm.h includes * a prototype for shmat(). Otherwise, it is up to the program to * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, * but not always right so it should be emitted by the program only * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ #undef Shmat_t /**/ /* config-skip */ #undef HAS_SHMAT_PROTOTYPE /**/ /* HAS_SIGACTION: * This symbol, if defined, indicates that Vr4's sigaction() routine * is available. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_SIGACTION /**/ #else #undef HAS_SIGACTION /*config-skip*/ #endif /* USE_STAT_BLOCKS: * This symbol is defined if this system has a stat structure declaring * st_blksize and st_blocks. */ #undef USE_STAT_BLOCKS /**/ /* USE_STDIO_PTR: * This symbol is defined if the _ptr and _cnt fields (or similar) * of the stdio FILE structure can be used to access the stdio buffer * for a file handle. If this is defined, then the FILE_ptr(fp) * and FILE_cnt(fp) macros will also be defined and should be used * to access these fields. */ /* USE_STDIO_BASE: * This symbol is defined if the _base field (or similar) of the * stdio FILE structure can be used to access the stdio buffer for * a file handle. If this is defined, then the FILE_base(fp) macro * will also be defined and should be used to access this field. * Also, the FILE_bufsiz(fp) macro will be defined and should be used * to determine the number of bytes in the buffer. USE_STDIO_BASE * will never be defined unless USE_STDIO_PTR is. */ /* STDIO_PTR_LVALUE: * This symbol is defined if the FILE_ptr macro can be used as an * lvalue. */ /* STDIO_CNT_LVALUE: * This symbol is defined if the FILE_cnt macro can be used as an * lvalue. */ #ifdef __DECC # define USE_STDIO_PTR /*config-skip*/ # define USE_STDIO_BASE /*config-skip*/ # define STDIO_PTR_LVALUE /*config-skip*/ # define STDIO_CNT_LVALUE /*config-skip*/ #else # undef USE_STDIO_PTR /*config-skip*/ # undef USE_STDIO_BASE /*config-skip*/ # undef STDIO_PTR_LVALUE /*config-skip*/ # undef STDIO_CNT_LVALUE /*config-skip*/ #endif /* FILE_ptr: * This macro is used to access the _ptr field (or equivalent) of the * FILE structure pointed to by its argument. This macro will always be * defined if USE_STDIO_PTR is defined. */ /* FILE_cnt: * This macro is used to access the _cnt field (or equivalent) of the * FILE structure pointed to by its argument. This macro will always be * defined if USE_STDIO_PTR is defined. */ #ifdef USE_STDIO_PTR # define FILE_ptr(fp) ((*fp)->_ptr) # define FILE_cnt(fp) ((*fp)->_cnt) #endif /* FILE_base: * This macro is used to access the _base field (or equivalent) of the * FILE structure pointed to by its argument. This macro will always be * defined if USE_STDIO_BASE is defined. */ /* FILE_bufsiz: * This macro is used to determine the number of bytes in the I/O * buffer pointed to by _base field (or equivalent) of the FILE * structure pointed to its argument. This macro will always be defined * if USE_STDIO_BASE is defined. */ #ifdef USE_STDIO_BASE # define FILE_base(fp) ((*fp)->_base) # define FILE_bufsiz(fp) ((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base) #endif /* USE_STRUCT_COPY: * This symbol, if defined, indicates that this C compiler knows how * to copy structures. If undefined, you'll need to use a block copy * routine of some sort instead. */ #define USE_STRUCT_COPY /**/ /* HAS_STRERROR: * This symbol, if defined, indicates that the strerror routine is * available to translate error numbers to strings. See the writeup * of Strerror() in this file before you try to define your own. */ /* HAS_SYS_ERRLIST: * This symbol, if defined, indicates that the sys_errlist array is * available to translate error numbers to strings. The extern int * sys_nerr gives the size of that table. */ /* Strerror: * This preprocessor symbol is defined as a macro if strerror() is * not available to translate error numbers to strings but sys_errlist[] * array is there. */ #define HAS_STRERROR /**/ #undef HAS_SYS_ERRLIST /**/ #define Strerror(e) strerror((e),vaxc$errno) /* HAS_SYMLINK: * This symbol, if defined, indicates that the symlink routine is available * to create symbolic links. */ #undef HAS_SYMLINK /**/ /* HAS_SYSCALL: * This symbol, if defined, indicates that the syscall routine is * available to call arbitrary system calls. If undefined, that's tough. */ #undef HAS_SYSCALL /**/ /* HAS_SYSTEM: * This symbol, if defined, indicates that the system routine is * available to issue a shell command. */ #define HAS_SYSTEM /**/ /* Time_t: * This symbol holds the type returned by time(). It can be long, * or time_t on BSD sites (in which case should be * included). */ #define Time_t time_t /* Time type */ /* HAS_TRUNCATE: * This symbol, if defined, indicates that the truncate routine is * available to truncate files. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_TRUNCATE /**/ #else #undef HAS_TRUNCATE /*config-skip*/ #endif /* HAS_VFORK: * This symbol, if defined, indicates that vfork() exists. */ #define HAS_VFORK /**/ /* Signal_t: * This symbol's value is either "void" or "int", corresponding to the * appropriate return type of a signal handler. Thus, you can declare * a signal handler using "Signal_t (*handler)()", and define the * handler using "Signal_t handler(sig)". */ #define Signal_t void /* Signal handler's return type */ /* HASVOLATILE: * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. */ #define HASVOLATILE /**/ #ifndef HASVOLATILE #define volatile /* config-skip */ #endif /* HAS_VPRINTF: * This symbol, if defined, indicates that the vprintf routine is available * to printf with a pointer to an argument list. If unavailable, you * may need to write your own, probably in terms of _doprnt(). */ /* USE_CHAR_VSPRINTF: * This symbol is defined if this system has vsprintf() returning type * (char*). The trend seems to be to declare it as "int vsprintf()". It * is up to the package author to declare vsprintf correctly based on the * symbol. */ #define HAS_VPRINTF /**/ #undef USE_CHAR_VSPRINTF /**/ /* HAS_WAIT4: * This symbol, if defined, indicates that wait4() exists. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_WAIT4 /**/ #else #undef HAS_WAIT4 /*config-skip*/ #endif /* HAS_WAITPID: * This symbol, if defined, indicates that the waitpid routine is * available to wait for child process. */ #define HAS_WAITPID /**/ /* HAS_WCSTOMBS: * This symbol, if defined, indicates that the wcstombs routine is * available to convert wide character strings to multibyte strings. */ #ifdef __DECC # define HAS_WCSTOMBS /*config-skip*/ #else # undef HAS_WCSTOMBS /*config-skip*/ #endif /* I_DIRENT: * This symbol, if defined, indicates to the C program that it should * include . Using this symbol also triggers the definition * of the Direntry_t define which ends up being 'struct dirent' or * 'struct direct' depending on the availability of . */ /* DIRNAMLEN: * This symbol, if defined, indicates to the C program that the length * of directory entry names is provided by a d_namlen field. Otherwise * you need to do strlen() on the d_name field. */ #undef I_DIRENT /**/ #define DIRNAMLEN /**/ #define Direntry_t struct dirent /* I_FCNTL: * This manifest constant tells the C program to include . */ #undef I_FCNTL /**/ /* I_GRP: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_GRP /**/ /* I_LIMITS: * This symbol, if defined, indicates to the C program that it should * include to get definition of symbols like WORD_BIT or * LONG_MAX, i.e. machine dependant limitations. */ #define I_LIMITS /**/ /* I_MEMORY: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_MEMORY /**/ /* I_NDBM: * This symbol, if defined, indicates that ndbm.h exists and should * be included. */ #undef I_NDBM /**/ /* I_STDARG: * This symbol, if defined, indicates that exists and should * be included. */ #define I_STDARG /**/ /* I_PWD: * This symbol, if defined, indicates to the C program that it should * include . */ /* PWQUOTA: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_quota. */ /* PWAGE: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_age. */ /* PWCHANGE: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_change. */ /* PWCLASS: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_class. */ /* PWEXPIRE: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_expire. */ /* PWCOMMENT: * This symbol, if defined, indicates to the C program that struct passwd * contains pw_comment. */ #undef I_PWD /**/ #undef PWQUOTA /**/ #undef PWAGE /**/ #undef PWCHANGE /**/ #undef PWCLASS /**/ #undef PWEXPIRE /**/ #define PWCOMMENT /**/ /* I_STDDEF: * This symbol, if defined, indicates that exists and should * be included. */ #define I_STDDEF /**/ /* I_STDLIB: * This symbol, if defined, indicates that exists and should * be included. */ #define I_STDLIB /**/ /* I_STRING: * This symbol, if defined, indicates to the C program that it should * include (USG systems) instead of (BSD systems). */ #define I_STRING /**/ /* I_SYS_DIR: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_DIR /**/ /* I_SYS_FILE: * This symbol, if defined, indicates to the C program that it should * include to get definition of R_OK and friends. */ #undef I_SYS_FILE /**/ /* I_SYS_IOCTL: * This symbol, if defined, indicates that exists and should * be included. Otherwise, include or . */ #undef I_SYS_IOCTL /**/ /* I_SYS_NDIR: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_NDIR /**/ /* I_SYS_RESOURCE: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_RESOURCE /**/ /* I_SYS_SELECT: * This symbol, if defined, indicates to the C program that it should * include in order to get definition of struct timeval. */ #undef I_SYS_SELECT /**/ /* I_DBM: * This symbol, if defined, indicates that exists and should * be included. */ /* I_RPCSVC_DBM: * This symbol, if defined, indicates that exists and * should be included. */ #undef I_DBM /**/ #undef I_RPCSVC_DBM /**/ /* I_SFIO: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SFIO /**/ /* I_SYS_STAT: * This symbol, if defined, indicates to the C program that it should * include . */ #define I_SYS_STAT /**/ /* I_SYS_TIMES: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_TIMES /**/ /* I_SYS_TYPES: * This symbol, if defined, indicates to the C program that it should * include . */ #define I_SYS_TYPES /**/ /* I_SYS_UN: * This symbol, if defined, indicates to the C program that it should * include to get UNIX domain socket definitions. */ #undef I_SYS_UN /**/ /* I_SYS_WAIT: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_WAIT /**/ /* I_TERMIO: * This symbol, if defined, indicates that the program should include * rather than . There are also differences in * the ioctl() calls that depend on the value of this symbol. */ /* I_TERMIOS: * This symbol, if defined, indicates that the program should include * the POSIX termios.h rather than sgtty.h or termio.h. * There are also differences in the ioctl() calls that depend on the * value of this symbol. */ /* I_SGTTY: * This symbol, if defined, indicates that the program should include * rather than . There are also differences in * the ioctl() calls that depend on the value of this symbol. */ #undef I_TERMIO /**/ #undef I_SGTTY /**/ #undef I_TERMIOS /**/ /* I_TIME: * This symbol, if defined, indicates to the C program that it should * include . */ /* I_SYS_TIME: * This symbol, if defined, indicates to the C program that it should * include . */ /* I_SYS_TIME_KERNEL: * This symbol, if defined, indicates to the C program that it should * include with KERNEL defined. */ #define I_TIME /**/ #undef I_SYS_TIME /**/ #undef I_SYS_TIME_KERNEL /**/ /* I_UNISTD: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_UNISTD /**/ /* I_UTIME: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_UTIME /**/ /* I_VARARGS: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_VARARGS /**/ /* I_VFORK: * This symbol, if defined, indicates to the C program that it should * include vfork.h. */ #undef I_VFORK /**/ /* CAN_PROTOTYPE: * If defined, this macro indicates that the C compiler can handle * function prototypes. */ /* _: * This macro is used to declare function parameters for folks who want * to make declarations with prototypes using a different style than * the above macros. Use double parentheses. For example: * * int main _((int argc, char *argv[])); */ #define CAN_PROTOTYPE /**/ #ifdef CAN_PROTOTYPE #define _(args) args /* config-skip */ #else #define _(args) () /* config-skip */ #endif /* RANDBITS: * This symbol contains the number of bits of random number the rand() * function produces. Usual values are 15, 16, and 31. */ #define RANDBITS 31 /**/ /* Select_fd_set_t: * This symbol holds the type used for the 2nd, 3rd, and 4th * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET * is defined, and 'int *' otherwise. This is only useful if you * have select(), of course. */ #if defined(__DECC) && defined(__DECC_VER) && (__DECC_VER >= 50200000) && defined(DECCRTL_SOCKETS) #define Select_fd_set_t fd_set * /**/ #else #define Select_fd_set_t int * /* config-skip */ #endif /* STDCHAR: * This symbol is defined to be the type of char used in stdio.h. * It has the values "unsigned char" or "char". */ #define STDCHAR char /**/ /* UNLINK_ALL_VERSIONS: * This symbol, if defined, indicates that the program should arrange * to remove all versions of a file if unlink() is called. */ #undef UNLINK_ALL_VERSIONS /**/ /* LOC_SED: * This symbol holds the complete pathname to the sed program. */ #define LOC_SED "_NLA0:" /**/ /* BIN: * This symbol holds the path of the bin directory where the package will * be installed. Program must be prepared to deal with ~name substitution. */ /* BIN_EXP: * This symbol is the filename expanded version of the BIN symbol, for * programs that do not want to deal with that at run-time. */ #define BIN "/perl_root/000000" /**/ #define BIN_EXP "/perl_root/000000" /**/ /* HAS_ALARM: * This symbol, if defined, indicates that the alarm routine is * available. */ #define HAS_ALARM /**/ /* HASATTRIBUTE: * This symbol indicates the C compiler can check for function attributes, * such as printf formats. This is normally only supported by GNU cc. */ #ifdef __GNUC__ # define HASATTRIBUTE /*config-skip*/ #else # undef HASATTRIBUTE /*config-skip*/ #endif #ifndef HASATTRIBUTE #define __attribute__(_arg_) #endif /* CASTI32: * This symbol is defined if the C compiler can cast negative * or large floating point numbers to 32-bit ints. */ #define CASTI32 /**/ /* HAS_CHOWN: * This symbol, if defined, indicates that the chown routine is * available. */ #define HAS_CHOWN /**/ /* HAS_CHROOT: * This symbol, if defined, indicates that the chroot routine is * available. */ #undef HAS_CHROOT /**/ /* HAS_CUSERID: * This symbol, if defined, indicates that the cuserid routine is * available to get character login names. */ #define HAS_CUSERID /**/ /* HAS_DBL_DIG: * This symbol, if defined, indicates that this system's * or defines the symbol DBL_DIG, which is the number * of significant digits in a double precision number. If this * symbol is not defined, a guess of 15 is usually pretty good. */ #define HAS_DBL_DIG /* */ /* HAS_DIFFTIME: * This symbol, if defined, indicates that the difftime routine is * available. */ #define HAS_DIFFTIME /**/ /* HAS_FORK: * This symbol, if defined, indicates that the fork routine is * available. */ /* VMS: In vmsish.h, fork is #defined to vfork. This kludge gets around * some obsolete code in pp.c, which should be fixed in its own right * sometime. - C. Bailey 26-Aug-1994 */ #define HAS_FORK /**/ /* HAS_GETLOGIN: * This symbol, if defined, indicates that the getlogin routine is * available. */ #define HAS_GETLOGIN /**/ /* HAS_GETPPID: * This symbol, if defined, indicates that the getppid routine is * available. */ #undef HAS_GETPPID /**/ /* HAS_HTONL: * This symbol, if defined, indicates that the htonl() routine (and * friends htons() ntohl() ntohs()) are available to do network * order byte swapping. */ /* HAS_HTONS: * This symbol, if defined, indicates that the htons() routine (and * friends htonl() ntohl() ntohs()) are available to do network * order byte swapping. */ /* HAS_NTOHL: * This symbol, if defined, indicates that the ntohl() routine (and * friends htonl() htons() ntohs()) are available to do network * order byte swapping. */ /* HAS_NTOHS: * This symbol, if defined, indicates that the ntohs() routine (and * friends htonl() htons() ntohl()) are available to do network * order byte swapping. */ #define HAS_HTONL /**/ #define HAS_HTONS /**/ #define HAS_NTOHL /**/ #define HAS_NTOHS /**/ /* HAS_MBLEN: * This symbol, if defined, indicates that the mblen routine is available * to find the number of bytes in a multibye character. */ #ifdef __DECC # define HAS_MBLEN /*config-skip*/ #else # undef HAS_MBLEN /*config-skip*/ #endif /* HAS_MKTIME: * This symbol, if defined, indicates that the mktime routine is * available. */ #ifdef __DECC # define HAS_MKTIME /*config-skip*/ #else # undef HAS_MKTIME /*config-skip*/ #endif /* HAS_NICE: * This symbol, if defined, indicates that the nice routine is * available. */ #define HAS_NICE /**/ /* HAS_PAUSE: * This symbol, if defined, indicates that the pause routine is * available. */ #define HAS_PAUSE /**/ /* HAS_PIPE: * This symbol, if defined, indicates that the pipe routine is * available. */ #define HAS_PIPE /**/ /* HAS_READLINK: * This symbol, if defined, indicates that the readlink routine is * available. */ #undef HAS_READLINK /**/ /* HAS_SETLINEBUF: * This symbol, if defined, indicates that the setlinebuf routine is * available to change stderr or stdout from block-buffered or unbuffered * to a line-buffered mode. */ #undef HAS_SETLINEBUF /**/ /* HAS_STRCHR: * This symbol is defined to indicate that the strchr()/strrchr() * functions are available for string searching. If not, try the * index()/rindex() pair. */ /* HAS_INDEX: * This symbol is defined to indicate that the index()/rindex() * functions are available for string searching. */ #define HAS_STRCHR /**/ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_INDEX /**/ #else #undef HAS_INDEX /*config-skip*/ #endif /* HAS_STRCOLL: * This symbol, if defined, indicates that the strcoll routine is * available to compare strings using collating information. */ #ifdef __DECC # define HAS_STRCOLL /*config-skip*/ #else # undef HAS_STRCOLL /*config-skip*/ #endif /* HAS_STRTOD: * This symbol, if defined, indicates that the strtod routine is * available to provide better numeric string conversion than atof(). */ #define HAS_STRTOD /**/ /* HAS_STRTOL: * This symbol, if defined, indicates that the strtol routine is available * to provide better numeric string conversion than atoi() and friends. */ #define HAS_STRTOL /**/ /* HAS_STRTOUL: * This symbol, if defined, indicates that the strtoul routine is * available to provide conversion of strings to unsigned long. */ #define HAS_STRTOUL /**/ /* HAS_STRXFRM: * This symbol, if defined, indicates that the strxfrm() routine is * available to compare strings using collating information. */ #ifdef __DECC # define HAS_STRXFRM /*config-skip*/ #else # undef HAS_STRXFRM /*config-skip*/ #endif /* HAS_TCGETPGRP: * This symbol, if defined, indicates that the tcgetpgrp routine is * available to get foreground process group ID. */ #undef HAS_TCGETPGRP /**/ /* HAS_TCSETPGRP: * This symbol, if defined, indicates that the tcsetpgrp routine is * available to set foreground process group ID. */ #undef HAS_TCSETPGRP /**/ /* HAS_TIMES: * This symbol, if defined, indicates that the times() routine exists. * Note that this became obsolete on some systems (SUNOS), which now * use getrusage(). It may be necessary to include . */ #define HAS_TIMES /**/ /* HAS_TZNAME: * This symbol, if defined, indicates that the tzname[] array is * available to access timezone names. */ #undef HAS_TZNAME /**/ /* HAS_UMASK: * This symbol, if defined, indicates that the umask routine is * available to get the file creation mask. */ #define HAS_UMASK /**/ /* HAS_WCTOMB: * This symbol, if defined, indicates that the wctomb routine is available * to covert a wide character to a multibyte. */ #ifdef __DECC # define HAS_WCTOMB /*config-skip*/ #else # undef HAS_WCTOMB /*config-skip*/ #endif /* Fpos_t: * This symbol holds the type used to declare file positions in libc. * It can be fpos_t, long, uint, etc... It may be necessary to include * to get any typedef'ed information. */ #define Fpos_t fpos_t /* File position type */ /* Gid_t: * This symbol holds the return type of getgid() and the type of * argument to setrgid() and related functions. Typically, * it is the type of group ids in the kernel. * It can be int, ushort, uid_t, etc... It may be necessary to include * to get any typedef'ed information. */ #if defined(__DECC) && defined(__DECC_VER) && (__DECC_VER >= 500000) # define Gid_t gid_t /* config-skip */ #else # define Gid_t unsigned int /* config-skip */ #endif /* I_DLFCN: * This symbol, if defined, indicates that exists and should * be included. */ #undef I_DLFCN /**/ /* I_FLOAT: * This symbol, if defined, indicates to the C program that it should * include to get definition of symbols like DBL_MAX or * DBL_MIN, i.e. machine dependent floating point values. */ #define I_FLOAT /**/ /* I_MATH: * This symbol, if defined, indicates to the C program that it should * include . */ #define I_MATH /**/ /* INTSIZE: * This symbol contains the size of an int, so that the C preprocessor * can make decisions based on it. */ /* LONGSIZE: * This symbol contains the value of sizeof(long) so that the C * preprocessor can make decisions based on it. */ /* SHORTSIZE: * This symbol contains the value of sizeof(short) so that the C * preprocessor can make decisions based on it. */ #define INTSIZE 4 /**/ #define LONGSIZE 4 /**/ #define SHORTSIZE 2 /**/ /* Off_t: * This symbol holds the type used to declare offsets in the kernel. * It can be int, long, off_t, etc... It may be necessary to include * to get any typedef'ed information. */ #define Off_t int /* type */ /* I_VALUES: * This symbol, if defined, indicates to the C program that it should * include to get definition of symbols like MINFLOAT or * MAXLONG, i.e. machine dependant limitations. Probably, you * should use instead, if it is available. */ #undef I_VALUES /**/ /* Free_t: * This variable contains the return type of free(). It is usually * void, but occasionally int. */ /* Malloc_t: * This symbol is the type of pointer returned by malloc and realloc. */ #define Malloc_t void * /**/ #define Free_t void /**/ /* MYMALLOC: * This symbol, if defined, indicates that we're using our own malloc. */ #undef MYMALLOC /**/ /* SH_PATH: * This symbol contains the full pathname to the shell used on this * on this system to execute Bourne shell scripts. Usually, this will be * /bin/sh, though it's possible that some systems will have /bin/ksh, * /bin/pdksh, /bin/ash, /bin/bash, or even something such as D:/bin/sh. */ #define SH_PATH "MCR" /**/ /* SIG_NAME: * This symbol contains a list of signal names in order. This is intended * to be used as a static array initialization, like this: * char *sig_name[] = { SIG_NAME }; * The signals in the list are separated with commas, and each signal * is surrounded by double quotes. There is no leading SIG in the signal * name, i.e. SIGQUIT is known as "QUIT". Duplicates are allowed. * The signal number for sig_name[i] is stored in sig_num[i]. * The last element is 0 to terminate the list with a NULL. This * corresponds to the 0 at the end of the sig_num list. * See SIG_NUM and SIG_MAX. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","IOT","EMT","FPE",\ "KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM",\ "ABRT","USR1","USR2","SPARE18","SPARE19","CHLD","CONT",\ "STOP","TSTP","TTIN","TTOU","DEBUG","SPARE27","SPARE28",\ "SPARE29","SPARE30","SPARE31","SPARE32","RTMIN","RTMAX",0 /**/ #else #define SIG_NAME "ZERO","HUP","INT","QUIT","ILL","TRAP","IOT","EMT","FPE",\ "KILL","BUS","SEGV","SYS","PIPE","ALRM","TERM",\ "ABRT","USR1","USR2",0 /*config-skip*/ #endif /* SIG_NUM: * This symbol contains a list of signal number, in the same order as the * SIG_NAME list. It is suitable for static array initialization, as in: * int sig_num[] = { SIG_NUM }; * The signals in the list are separated with commas, and the indices * within that list and the SIG_NAME list match, so it's easy to compute * the signal name from a number or vice versa at the price of a small * dynamic linear lookup. Duplicates are allowed, so you can't assume * sig_num[i] == i. Instead, the signal number corresponding to * sig_name[i] is sig_number[i]. * The last element is 0, corresponding to the 0 at the end of * the sig_name list. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,64,0 /**/ #else #define SIG_NUM 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0 /*config-skip*/ #endif /* Mode_t: * This symbol holds the type used to declare file modes * for systems calls. It is usually mode_t, but may be * int or unsigned short. It may be necessary to include * to get any typedef'ed information. */ #define Mode_t unsigned int /* file mode parameter for system calls*/ /* SSize_t: * This symbol holds the type used by functions that return * a count of bytes or an error condition. It must be a signed type. * It is usually ssize_t, but may be long or int, etc. * It may be necessary to include or * to get any typedef'ed information. * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). */ #define SSize_t int /* signed count of bytes */ /* VAL_O_NONBLOCK: * This symbol is to be used during open() or fcntl(F_SETFL) to turn on * non-blocking I/O for the file descriptor. Note that there is no way * back, i.e. you cannot turn it blocking again this way. If you wish to * alternatively switch between blocking and non-blocking, use the * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. */ /* VAL_EAGAIN: * This symbol holds the errno error code set by read() when no data was * present on the non-blocking file descriptor. */ /* RD_NODATA: * This symbol holds the return code from read() when no data is present * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is * not defined, then you can't distinguish between no data and EOF by * issuing a read(). You'll have to find another way to tell for sure! */ /* EOF_NONBLOCK: * This symbol, if defined, indicates to the C program that a read() on * a non-blocking file descriptor will return 0 on EOF, and not the value * held in RD_NODATA (-1 usually, in that case!). */ #undef VAL_O_NONBLOCK #undef VAL_EAGAIN #undef RD_NODATA #undef EOF_NONBLOCK /* OLDARCHLIB: * This variable, if defined, holds the name of the directory in * which the user has perl5.000 or perl5.001 architecture-dependent * public library files for $package. For the most part, these * files will work with 5.002 (and later), but that is not * guaranteed. */ /* OLDARCHLIB_EXP: * This symbol contains the ~name expanded version of OLDARCHLIB, to be * used in programs that are not prepared to deal with ~ expansion at * run-time. */ /* ==> NOTE <== * This value is automatically updated by FndVers.Com * when Perl is built. Please do not change it by hand; make * any changes to FndVers.Com instead. */ #define OLDARCHLIB_EXP "/perl_root/lib/VMS_VAX" /**/ #define OLDARCHLIB OLDARCHLIB_EXP /*config-skip*/ /* PRIVLIB: * This symbol contains the name of the private library for this package. * The library is private in the sense that it needn't be in anyone's * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. */ /* PRIVLIB_EXP: * This symbol contains the ~name expanded version of PRIVLIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ #define PRIVLIB_EXP "/perl_root/lib" /**/ #define PRIVLIB PRIVLIB_EXP /*config-skip*/ /* SITELIB: * This symbol contains the name of the private library for this package. * The library is private in the sense that it needn't be in anyone's * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. * Individual sites may place their own extensions and modules in * this directory. */ /* SITELIB_EXP: * This symbol contains the ~name expanded version of SITELIB, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ #define SITELIB_EXP "/perl_root/lib/site_perl" /**/ #define SITELIB SITELIB_EXP /*config-skip*/ /* SITEARCH: * This symbol contains the name of the private library for this package. * The library is private in the sense that it needn't be in anyone's * execution path, but it should be accessible by the world. The program * should be prepared to do ~ expansion. * The standard distribution will put nothing in this directory. * Individual sites may place their own extensions and modules in * this directory. */ /* SITEARCH_EXP: * This symbol contains the ~name expanded version of SITEARCH, to be used * in programs that are not prepared to deal with ~ expansion at run-time. */ /* ==> NOTE <== * This value is automatically updated by FndVers.Com * when Perl is built. Please do not change it by hand; make * any changes to FndVers.Com instead. */ #define SITEARCH_EXP "/perl_root/lib/site_perl/VMS_VAX" /**/ #define SITEARCH SITEARCH_EXP /*config-skip*/ /* Size_t: * This symbol holds the type used to declare length parameters * for string functions. It is usually size_t, but may be * unsigned long, int, etc. It may be necessary to include * to get any typedef'ed information. */ #define Size_t size_t /* length paramater for string functions */ /* Uid_t: * This symbol holds the type used to declare user ids in the kernel. * It can be int, ushort, uid_t, etc... It may be necessary to include * to get any typedef'ed information. */ #if defined(__DECC) && defined(__DECC_VER) && (__DECC_VER >= 500000) # define Uid_t uid_t /* config-skip */ #else # define Uid_t unsigned int /* config-skip */ #endif /* I_SYS_PARAM: * This symbol, if defined, indicates to the C program that it should * include . */ #undef I_SYS_PARAM /* VOID_CLOSEDIR: * This symbol, if defined, indicates that the closedir() routine * does not return a value. */ #define VOID_CLOSEDIR /**/ /* HAS_DLERROR: * This symbol, if defined, indicates that the dlerror routine is * available. */ #undef HAS_DLERROR /**/ /* DLSYM_NEEDS_UNDERSCORE: * This symbol, if defined, indicates that we need to prepend an * underscore to the symbol name before calling dlsym(). This only * makes sense if you *have* dlsym, which we will presume is the * case if you're using dl_dlopen.xs. */ #undef DLSYM_NEEDS_UNDERSCORE /* */ /* SETUID_SCRIPTS_ARE_SECURE_NOW: * This symbol, if defined, indicates that setuid scripts are secure. */ /* DOSUID: * This symbol, if defined, indicates that the C program should * check the script that it is executing for setuid/setgid bits, and * attempt to emulate setuid/setgid on systems that have disabled * setuid #! scripts because the kernel can't do it securely. * It is up to the package designer to make sure that this emulation * is done securely. Among other things, it should do an fstat on * the script it just opened to make sure it really is a setuid/setgid * script, it should make sure the arguments passed correspond exactly * to the argument on the #! line, and it should not trust any * subprocesses to which it must pass the filename rather than the * file descriptor of the script to be executed. */ #undef SETUID_SCRIPTS_ARE_SECURE_NOW /**/ #undef DOSUID /**/ /* HAS_INET_ATON: * This symbol, if defined, indicates to the C program that the * inet_aton() function is available to parse IP address "dotted-quad" * strings. * VMS: SocketShr doesn't support this, so we let the Socket extension * roll its own. */ #undef HAS_INET_ATON /**/ /* HAS_ISASCII: * This manifest constant lets the C program know that the * isascii is available. */ #define HAS_ISASCII /**/ /* HAS_SETLOCALE: * This symbol, if defined, indicates that the setlocale routine is * available to handle locale-specific ctype implementations. */ /* I_LOCALE: * This symbol, if defined, indicates to the C program that it should * include . */ /* HAS_LOCALECONV: * This symbol, if defined, indicates that the localeconv routine is * available for numeric and monetary formatting conventions. */ #ifdef __DECC # define I_LOCALE /*config-skip*/ # define HAS_SETLOCALE /*config-skip*/ # define HAS_LOCALECONV /*config-skip*/ #else # undef I_LOCALE /*config-skip*/ # undef HAS_SETLOCALE /*config-skip*/ # undef HAS_LOCALECONV /*config-skip*/ #endif /* HAS_MKFIFO: * This symbol, if defined, indicates that the mkfifo routine is * available. */ #undef HAS_MKFIFO /**/ /* HAS_PATHCONF: * This symbol, if defined, indicates that pathconf() is available * to determine file-system related limits and options associated * with a given filename. */ /* HAS_FPATHCONF: * This symbol, if defined, indicates that pathconf() is available * to determine file-system related limits and options associated * with a given open file descriptor. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_PATHCONF /**/ #define HAS_FPATHCONF /**/ #else #undef HAS_PATHCONF /*config-skip*/ #undef HAS_FPATHCONF /*config-skip*/ #endif /* HAS_SAFE_BCOPY: * This symbol, if defined, indicates that the bcopy routine is available * to copy potentially overlapping memory blocks. Otherwise you should * probably use memmove() or memcpy(). If neither is defined, roll your * own version. */ #undef HAS_SAFE_BCOPY /**/ /* HAS_SAFE_MEMCPY: * This symbol, if defined, indicates that the memcpy routine is available * to copy potentially overlapping memory blocks. Otherwise you should * probably use memmove() or memcpy(). If neither is defined, roll your * own version. */ #define HAS_SAFE_MEMCPY /**/ /* HAS_SANE_MEMCMP: * This symbol, if defined, indicates that the memcmp routine is available * and can be used to compare relative magnitudes of chars with their high * bits set. If it is not defined, roll your own version. */ #define HAS_SANE_MEMCMP /**/ /* HAS_SETPGRP: * This symbol, if defined, indicates that the setpgrp routine is * available to set the current process group. */ /* USE_BSD_SETPGRP: * This symbol, if defined, indicates that setpgrp needs two * arguments whereas USG one needs none. See also HAS_SETPGID * for a POSIX interface. */ /* USE_BSDPGRP: * This symbol, if defined, indicates that the BSD notion of process * group is to be used. For instance, you have to say setpgrp(pid, pgrp) * instead of the USG setpgrp(). */ #undef HAS_SETPGRP /**/ #undef USE_BSD_SETPGRP /**/ #undef USE_BSDPGRP /**/ /* HAS_SETPGID: * This symbol, if defined, indicates that the setpgid routine is * available to set process group ID. */ #undef HAS_SETPGID /**/ /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) * routine is available to set the current process group. */ #undef HAS_SETPGRP2 /**/ /* HAS_SYSCONF: * This symbol, if defined, indicates that sysconf() is available * to determine system related limits and options. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_SYSCONF /**/ #else #undef HAS_SYSCONF /*config-skip*/ #endif /* Gconvert: * This preprocessor macro is defined to convert a floating point * number to a string without a trailing decimal point. This * emulates the behavior of sprintf("%g"), but is sometimes much more * efficient. If gconvert() is not available, but gcvt() drops the * trailing decimal point, then gcvt() is used. If all else fails, * a macro using sprintf("%g") is used. Arguments for the Gconvert * macro are: value, number of digits, whether trailing zeros should * be retained, and the output buffer. * Possible values are: * d_Gconvert='gconvert((x),(n),(t),(b))' * d_Gconvert='gcvt((x),(n),(b))' * d_Gconvert='sprintf((b),"%.*g",(n),(x))' * The last two assume trailing zeros should not be kept. */ #define Gconvert(x,n,t,b) my_gconvert(x,n,t,b) /* HAS_GETPGID: * This symbol, if defined, indicates to the C program that * the getpgid(pid) function is available to get the * process group id. */ #undef HAS_GETPGID /**/ /* HAS_GETPGRP: * This symbol, if defined, indicates that the getpgrp routine is * available to get the current process group. */ /* USE_BSD_GETPGRP: * This symbol, if defined, indicates that getpgrp needs one * arguments whereas USG one needs none. */ #undef HAS_GETPGRP /**/ #undef USE_BSD_GETPGRP /**/ /* HAS_GETPGRP2: * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) * routine is available to get the current process group. */ #undef HAS_GETPGRP2 /**/ /* USE_SFIO: * This symbol, if defined, indicates that sfio should * be used. */ #undef USE_SFIO /**/ /* PTHREADS_CREATED_JOINABLE: * This symbol, if defined, indicates that pthreads are created * in the joinable (aka undetached) state. */ #define PTHREADS_CREATED_JOINABLE /**/ /* Sigjmp_buf: * This is the buffer type to be used with Sigsetjmp and Siglongjmp. */ /* Sigsetjmp: * This macro is used in the same way as sigsetjmp(), but will invoke * traditional setjmp() if sigsetjmp isn't available. */ /* Siglongjmp: * This macro is used in the same way as siglongjmp(), but will invoke * traditional longjmp() if siglongjmp isn't available. */ #if ((__VMS_VER >= 70000000) && (__DECC_VER >= 50200000)) || (__CRTL_VER >= 70000000) #define HAS_SIGSETJMP /**/ #else #undef HAS_SIGSETJMP /*config-skip*/ #endif #ifdef HAS_SIGSETJMP #define Sigjmp_buf sigjmp_buf /* config-skip */ #define Sigsetjmp(buf,save_mask) sigsetjmp(buf,save_mask) /* config-skip */ #define Siglongjmp(buf,retval) siglongjmp(buf,retval) /* config-skip */ #else #define Sigjmp_buf jmp_buf /* config-skip */ #define Sigsetjmp(buf,save_mask) setjmp(buf) /* config-skip */ #define Siglongjmp(buf,retval) longjmp(buf,retval) /* config-skip */ #endif /* USE_DYNAMIC_LOADING: * This symbol, if defined, indicates that dynamic loading of * some sort is available. */ #define USE_DYNAMIC_LOADING /**/ /* STARTPERL: * This variable contains the string to put in front of a perl * script to make sure (one hopes) that it runs with perl and not * some shell. */ #define STARTPERL "" /**/ /* Groups_t: * This symbol holds the type used for the second argument to * [gs]etgroups(). Usually, this is the same of gidtype, but * sometimes it isn't. It can be int, ushort, uid_t, etc... * It may be necessary to include to get any * typedef'ed information. This is only required if you have * getgroups() or setgroups. */ #if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) #define Groups_t unsigned int /* config-skip */ #endif /* DB_Prefix_t: * This symbol contains the type of the prefix structure element * in the header file. In older versions of DB, it was * int, while in newer ones it is u_int32_t. */ /* DB_Hash_t: * This symbol contains the type of the prefix structure element * in the header file. In older versions of DB, it was * int, while in newer ones it is size_t. */ #undef DB_Hash_t /**/ #undef DB_Prefix_t /**/ /* USE_PERLIO: * This symbol, if defined, indicates that the PerlIO abstraction should * be used throughout. If not defined, stdio should be * used in a fully backward compatible manner. */ #undef USE_PERLIO /**/ /* VOIDFLAGS: * This symbol indicates how much support of the void type is given by this * compiler. What various bits mean: * * 1 = supports declaration of void * 2 = supports arrays of pointers to functions returning void * 4 = supports comparisons between pointers to void functions and * addresses of void functions * 8 = suports declaration of generic void pointers * * The package designer should define VOIDUSED to indicate the requirements * of the package. This can be done either by #defining VOIDUSED before * including config.h, or by defining defvoidused in Myinit.U. If the * latter approach is taken, only those flags will be tested. If the * level of void support necessary is not present, defines void to int. */ #ifndef VOIDUSED #define VOIDUSED 15 #endif #define VOIDFLAGS 15 #if (VOIDFLAGS & VOIDUSED) != VOIDUSED #define void int /* is void to be avoided? */ /* config-skip */ #define M_VOID /* Xenix strikes again */ /* config-skip */ #endif #ifdef VMS_DO_SOCKETS /* HAS_SOCKET: * This symbol, if defined, indicates that the BSD socket interface is * supported. */ /* HAS_SOCKETPAIR: * This symbol, if defined, indicates that the BSD socketpair() call is * supported. */ #define HAS_SOCKET /**/ /* config-skip */ #undef HAS_SOCKETPAIR /**/ /* config-skip */ /* HAS_GETHOSTENT: * This symbol, if defined, indicates that the gethostent routine is * available to lookup host names in some data base or other. */ #define HAS_GETHOSTENT /**/ /* config-skip */ /* HAS_GETHOSTBYADDR: * This symbol, if defined, indicates that the gethostbyaddr routine is * available to lookup hosts by their IP addresses. */ #define HAS_GETHOSTBYADDR /**/ /* Netdb_host_t: * This symbol holds the type used for the 1st argument * to gethostbyaddr(). */ #define Netdb_host_t char * /**/ /* Netdb_hlen_t: * This symbol holds the type used for the 2nd argument * to gethostbyaddr(). */ #define Netdb_hlen_t int /* HAS_GETHOSTBYNAME: * This symbol, if defined, indicates that the gethostbyname routine is * available to lookup hosts by their DNS names. */ #define HAS_GETHOSTBYNAME /**/ /* Netdb_name_t: * This symbol holds the type used for the 1st argument * to gethostbyname(), the 1st argument to getnetbyname(), * the 1st argument to getprotobyname(), the 1st argument to * getservbyname(), the 2nd argument to getservbyname(), * and the 2nd argument to getservbyport(). */ #define Netdb_name_t long /**/ /* HAS_GETNETBYADD: * This symbol, if defined, indicates that the getnetbyaddr routine is * available to lookup networks by their IP addresses. */ #define HAS_GETNETBYADD /**/ /* Netdb_net_t: * This symbol holds the type used for the 1st argument * to getnetbyaddr(). */ #define Netdb_net_t long /* HAS_GETHOSTBYADDR: * This symbol, if defined, indicates that the gethostbyaddr routine is * available to lookup host names by their IP addresses. */ #define HAS_GETHBYADDR /**/ /* config-skip */ /* Gethbadd_addr_t: * This symbol holds the type used for the 1st argument * to gethostbyaddr(). */ #define Gethbadd_addr_t char * /**/ /* config-skip */ /* Gethbadd_alen_t: * This symbol holds the type used for the 2nd argument * to gethostbyaddr(). */ #define Gethbadd_alen_t int /**/ /* config-skip */ #ifdef DECCRTL_SOCKETS /* HAS_GETNETBYADDR: * This symbol, if defined, indicates that the getnetbyaddr routine is * available to lookup networks by their IP addresses. */ #define HAS_GETNETBYADDR /**/ /* config-skip */ /* Gethbadd_net_t: * This symbol holds the type used for the 1st argument * to getnetbyaddr(). */ #define Getnbadd_net_t long /**/ /* config-skip */ #else #undef HAS_GETNETBYADDR /**/ /* config-skip */ #undef Getnbadd_net_t long /**/ /* config-skip */ #endif /* VMS: In general, TCP/IP header files should be included from * sockadapt.h, instead of here, in order to keep the TCP/IP code * together as much as possible. */ /* I_NETINET_IN: * This symbol, if defined, indicates to the C program that it should * include . Otherwise, you may try . */ #undef I_NETINET_IN /**/ /* config-skip */ /* I_NETDB: * This symbol, if defined, indicates that exists and * should be included. */ #undef I_NETDB /**/ /* config-skip */ /* I_NET_ERRNO: * This symbol, if defined, indicates that exists and * should be included. */ #undef I_NET_ERRNO /**/ /* config-skip */ /* HAS_SELECT: * This symbol, if defined, indicates that the select routine is * available to select active file descriptors. If the timeout field * is used, may need to be included. */ #define HAS_SELECT /**/ /* config-skip */ #else /* VMS_DO_SOCKETS */ #undef HAS_SOCKET /**/ /* config-skip */ #undef HAS_SOCKETPAIR /**/ /* config-skip */ #undef HAS_GETHOSTENT /**/ /* config-skip */ #undef I_NETINET_IN /**/ /* config-skip */ #undef I_NETDB /**/ /* config-skip */ #undef I_NET_ERRNO /**/ /* config-skip */ #undef HAS_SELECT /**/ /* config-skip */ #undef HAS_GETHOSTBYADDR /**/ /* config-skip */ #undef HAS_GETNETBYADDR /**/ /* config-skip */ #endif /* !VMS_DO_SOCKETS */ #endif