# # Makefile to build perl on Windows using DMAKE. # Supported compilers: # Microsoft Visual C++ 6.0 or later # MinGW with gcc-3.2 or later # Windows SDK 64-bit compiler and tools # # This is set up to build a perl.exe that runs off a shared library # (perl515.dll). Also makes individual DLLs for the XS extensions. # ## ## Make sure you read README.win32 *before* you mess with anything here! ## ## ## Build configuration. Edit the values below to suit your needs. ## # # Set these to wherever you want "dmake install" to put your # newly built perl. # INST_DRV *= c: INST_TOP *= $(INST_DRV)\perl # # Uncomment if you want to build a 32-bit Perl using a 32-bit compiler # on a 64-bit version of Windows. #WIN64 *= undef # # Comment this out if you DON'T want your perl installation to be versioned. # This means that the new installation will overwrite any files from the # old installation at the same INST_TOP location. Leaving it enabled is # the safest route, as perl adds the extra version directory to all the # locations it installs files to. If you disable it, an alternative # versioned installation can be obtained by setting INST_TOP above to a # path that includes an arbitrary version string. # #INST_VER *= \5.15.4 # # Comment this out if you DON'T want your perl installation to have # architecture specific components. This means that architecture- # specific files will be installed along with the architecture-neutral # files. Leaving it enabled is safer and more flexible, in case you # want to build multiple flavors of perl and install them together in # the same location. Commenting it out gives you a simpler # installation that is easier to understand for beginners. # #INST_ARCH *= \$(ARCHNAME) # # Uncomment this if you want perl to run # $Config{sitelibexp}\sitecustomize.pl # before anything else. This script can then be set up, for example, # to add additional entries to @INC. # #USE_SITECUST *= define # # uncomment to enable multiple interpreters. This is need for fork() # emulation and for thread support. # USE_MULTI *= define # # Interpreter cloning/threads; now reasonably complete. # This should be enabled to get the fork() emulation. # This needs USE_MULTI above. # USE_ITHREADS *= define # # uncomment to enable the implicit "host" layer for all system calls # made by perl. This needs USE_MULTI above. # This is also needed to get fork(). # USE_IMP_SYS *= define # # Comment out next assign to disable perl's I/O subsystem and use compiler's # stdio for IO - depending on your compiler vendor and run time library you may # then get a number of fails from make test i.e. bugs - complain to them not us ;-). # You will also be unable to take full advantage of perl5.8's support for multiple # encodings and may see lower IO performance. You have been warned. USE_PERLIO *= define # # Comment this out if you don't want to enable large file support for # some reason. Should normally only be changed to maintain compatibility # with an older release of perl. USE_LARGE_FILES *= define # # uncomment exactly one of the following # # Visual C++ 6.x (aka Visual C++ 98) #CCTYPE *= MSVC60 # Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools) #CCTYPE *= MSVC70FREE # Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version) #CCTYPE *= MSVC70 # Windows Server 2003 SP1 Platform SDK (April 2005) #CCTYPE = SDK2003SP1 # Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version) #CCTYPE *= MSVC80FREE # Visual C++ 2005 (aka Visual C++ 8.x) (full version) #CCTYPE *= MSVC80 # Visual C++ 2008 Express Edition (aka Visual C++ 9.x) (free version) #CCTYPE *= MSVC90FREE # Visual C++ 2008 (aka Visual C++ 9.x) (full version) #CCTYPE *= MSVC90 # Visual C++ 2010 Express Edition (aka Visual C++ 10.x) (free version) #CCTYPE = MSVC100FREE # Visual C++ 2010 (aka Visual C++ 10.x) (full version) #CCTYPE = MSVC100 # MinGW or mingw-w64 with gcc-3.2 or later CCTYPE *= GCC # # uncomment next line if you want debug version of perl (big,slow) # If not enabled, we automatically try to use maximum optimization # with all compilers that are known to have a working optimizer. # #CFG *= Debug # # uncomment to enable linking with setargv.obj under the Visual C # compiler. Setting this options enables perl to expand wildcards in # arguments, but it may be harder to use alternate methods like # File::DosGlob that are more powerful. This option is supported only with # Visual C. # #USE_SETARGV *= define # # set this if you wish to use perl's malloc # WARNING: Turning this on/off WILL break binary compatibility with extensions # you may have compiled with/without it. Be prepared to recompile all # extensions if you change the default. Currently, this cannot be enabled # if you ask for USE_IMP_SYS above. # #PERL_MALLOC *= define # # set this to enable debugging mstats # This must be enabled to use the Devel::Peek::mstat() function. This cannot # be enabled without PERL_MALLOC as well. # #DEBUG_MSTATS *= define # # set this to additionally provide a statically linked perl-static.exe. # Note that dynamic loading will not work with this perl, so you must # include required modules statically using the STATIC_EXT or ALL_STATIC # variables below. A static library perl515s.lib will also be created. # Ordinary perl.exe is not affected by this option. # #BUILD_STATIC *= define # # in addition to BUILD_STATIC the option ALL_STATIC makes *every* # extension get statically built # This will result in a very large perl executable, but the main purpose # is to have proper linking set so as to be able to create miscellaneous # executables with different built-in extensions # #ALL_STATIC *= define # # set the install locations of the compiler include/libraries # Running VCVARS32.BAT is *required* when using Visual C. # Some versions of Visual C don't define MSVCDIR in the environment, # so you may have to set CCHOME explicitly (spaces in the path name should # not be quoted) # .IF "$(CCTYPE)" == "GCC" CCHOME *= C:\MinGW .ELSE CCHOME *= $(MSVCDIR) .ENDIF # # uncomment this if you are using x86_64-w64-mingw32 cross-compiler # ie if your gcc executable is called 'x86_64-w64-mingw32-gcc' # instead of the usual 'gcc'. # #GCCCROSS *= define # # Following sets $Config{incpath} and $Config{libpth} # .IF "$(GCCCROSS)" == "define" CCINCDIR *= $(CCHOME)\mingw\include CCLIBDIR *= $(CCHOME)\mingw\lib .ELSE CCINCDIR *= $(CCHOME)\include CCLIBDIR *= $(CCHOME)\lib .ENDIF # # Additional compiler flags can be specified here. # BUILDOPT *= $(BUILDOPTEXTRA) # # This should normally be disabled. Enabling it will disable the File::Glob # implementation of CORE::glob. # #BUILDOPT += -DPERL_EXTERNAL_GLOB # # Perl needs to read scripts in text mode so that the DATA filehandle # works correctly with seek() and tell(), or around auto-flushes of # all filehandles (e.g. by system(), backticks, fork(), etc). # # The current version on the ByteLoader module on CPAN however only # works if scripts are read in binary mode. But before you disable text # mode script reading (and break some DATA filehandle functionality) # please check first if an updated ByteLoader isn't available on CPAN. # BUILDOPT += -DPERL_TEXTMODE_SCRIPTS # # specify semicolon-separated list of extra directories that modules will # look for libraries (spaces in path names need not be quoted) # EXTRALIBDIRS *= # # set this to point to cmd.exe (only needed if you use some # alternate shell that doesn't grok cmd.exe style commands) # #SHELL *= g:\winnt\system32\cmd.exe # # set this to your email address (perl will guess a value from # from your loginname and your hostname, which may not be right) # #EMAIL *= ## ## Build configuration ends. ## ##################### CHANGE THESE ONLY IF YOU MUST ##################### PERL_MALLOC *= undef DEBUG_MSTATS *= undef USE_SITECUST *= undef USE_MULTI *= undef USE_ITHREADS *= undef USE_IMP_SYS *= undef USE_PERLIO *= undef USE_LARGE_FILES *= undef .IF "$(USE_IMP_SYS)" == "define" PERL_MALLOC = undef .ENDIF .IF "$(PERL_MALLOC)" == "undef" DEBUG_MSTATS = undef .ENDIF .IF "$(DEBUG_MSTATS)" == "define" BUILDOPT += -DPERL_DEBUGGING_MSTATS .ENDIF .IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef" USE_MULTI != define .ENDIF .IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef" USE_MULTI != define .ENDIF .IF "$(USE_SITECUST)" == "define" BUILDOPT += -DUSE_SITECUSTOMIZE .ENDIF .IF "$(USE_MULTI)" != "undef" BUILDOPT += -DPERL_IMPLICIT_CONTEXT .ENDIF .IF "$(USE_IMP_SYS)" != "undef" BUILDOPT += -DPERL_IMPLICIT_SYS .ENDIF .IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64 PROCESSOR_ARCHITECTURE *= x86 .IF "$(WIN64)" == "" # When we are running from a 32bit cmd.exe on AMD64 then # PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432 # is set to AMD64 .IF "$(PROCESSOR_ARCHITEW6432)" != "" PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432) WIN64 = define .ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64" WIN64 = define .ELSE WIN64 = undef .ENDIF .ENDIF # Treat 64-bit MSVC60 (doesn't really exist) as SDK2003SP1 because # both link against MSVCRT.dll (which is part of Windows itself) and # not against a compiler specific versioned runtime. .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "MSVC60" CCTYPE = SDK2003SP1 .ENDIF ARCHITECTURE = $(PROCESSOR_ARCHITECTURE) .IF "$(ARCHITECTURE)" == "AMD64" ARCHITECTURE = x64 .ENDIF .IF "$(ARCHITECTURE)" == "IA64" ARCHITECTURE = ia64 .ENDIF .IF "$(USE_MULTI)" == "define" ARCHNAME = MSWin32-$(ARCHITECTURE)-multi .ELSE .IF "$(USE_PERLIO)" == "define" ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio .ELSE ARCHNAME = MSWin32-$(ARCHITECTURE) .ENDIF .ENDIF .IF "$(USE_ITHREADS)" == "define" ARCHNAME !:= $(ARCHNAME)-thread .ENDIF # Visual C++ 98, .NET 2003, 2005/2008/2010 specific. # VC++ 6/7/8/9/10.x can load DLLs on demand. Makes the test suite run # in about 10% less time. (The free version of 7.x can't do this, but the free # versions of 8/9/10.x can.) .IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" || \ "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" DELAYLOAD *= -DELAYLOAD:ws2_32.dll delayimp.lib .ENDIF # Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and # DLLs. These either need copying everywhere with the binaries, or else need # embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For # simplicity, embed them if they exist (and delete them afterwards so that they # don't get installed too). EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \ if exist $@.manifest del $@.manifest EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \ if exist $@.manifest del $@.manifest ARCHDIR = ..\lib\$(ARCHNAME) COREDIR = ..\lib\CORE AUTODIR = ..\lib\auto LIBDIR = ..\lib EXTDIR = ..\ext DISTDIR = ..\dist CPANDIR = ..\cpan PODDIR = ..\pod EXTUTILSDIR = $(LIBDIR)\ExtUtils HTMLDIR = .\html # INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin INST_BIN = $(INST_SCRIPT)$(INST_ARCH) INST_LIB = $(INST_TOP)$(INST_VER)\lib INST_ARCHLIB = $(INST_LIB)$(INST_ARCH) INST_COREDIR = $(INST_ARCHLIB)\CORE INST_HTML = $(INST_TOP)$(INST_VER)\html # # Programs to compile, build .lib files and link # .USESHELL : .IF "$(CCTYPE)" == "GCC" .IF "$(GCCCROSS)" == "define" ARCHPREFIX = x86_64-w64-mingw32- .ENDIF CC = $(ARCHPREFIX)gcc LINK32 = $(ARCHPREFIX)g++ LIB32 = $(ARCHPREFIX)ar rc IMPLIB = $(ARCHPREFIX)dlltool RSC = $(ARCHPREFIX)windres i = .i o = .o a = .a # # Options # INCLUDES = -I.\include -I. -I.. -I$(COREDIR) DEFINES = -DWIN32 .IF "$(WIN64)" == "define" DEFINES += -DWIN64 -DCONSERVATIVE .ENDIF LOCDEFS = -DPERLDLL -DPERL_CORE SUBSYS = console CXX_FLAG = -xc++ # Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link # correctly if -lmsvcrt is specified explicitly. LIBC = #LIBC = -lmsvcrt # same libs as MSVC LIBFILES = $(LIBC) \ -lmoldname -lkernel32 -luser32 -lgdi32 \ -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \ -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \ -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32 .IF "$(CFG)" == "Debug" OPTIMIZE = -g -O2 -DDEBUGGING LINK_DBG = -g .ELSE OPTIMIZE = -s -O2 LINK_DBG = -s .ENDIF EXTRACFLAGS = CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE) LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" OBJOUT_FLAG = -o EXEOUT_FLAG = -o LIBOUT_FLAG = BUILDOPT += -fno-strict-aliasing -mms-bitfields .ELSE CC = cl LINK32 = link LIB32 = $(LINK32) -lib RSC = rc # # Options # INCLUDES = -I$(COREDIR) -I.\include -I. -I.. #PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT LOCDEFS = -DPERLDLL -DPERL_CORE SUBSYS = console CXX_FLAG = -TP -EHsc LIBC = msvcrt.lib .IF "$(CFG)" == "Debug" OPTIMIZE = -Od -MD -Zi -DDEBUGGING LINK_DBG = -debug .ELSE OPTIMIZE = -MD -Zi -DNDEBUG # we enable debug symbols in release builds also LINK_DBG = -debug -opt:ref,icf # you may want to enable this if you want COFF symbols in the executables # in addition to the PDB symbols. The default Dr. Watson that ships with # Windows can use the the former but not latter. The free WinDbg can be # installed to get better stack traces from just the PDB symbols, so we # avoid the bloat of COFF symbols by default. #LINK_DBG = $(LINK_DBG) -debugtype:both .IF "$(WIN64)" == "define" # enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG) OPTIMIZE += -Ox -GL LINK_DBG += -ltcg .ELSE # -O1 yields smaller code, which turns out to be faster than -O2 on x86 OPTIMIZE += -O1 #OPTIMIZE += -O2 .ENDIF .ENDIF .IF "$(WIN64)" == "define" DEFINES += -DWIN64 -DCONSERVATIVE OPTIMIZE += -fp:precise .ENDIF # For now, silence VC++ 8/9/10.x's warnings about "unsafe" CRT functions # and POSIX CRT function names being deprecated. .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE .ENDIF # In VS 2005 (VC++ 8.0) Microsoft changes time_t from 32-bit to # 64-bit, even in 32-bit mode. It also provides the _USE_32BIT_TIME_T # preprocessor option to revert back to the old functionality for # backward compatibility. We define this symbol here for older 32-bit # compilers only (which aren't using it at all) for the sole purpose # of getting it into $Config{ccflags}. That way if someone builds # Perl itself with e.g. VC6 but later installs an XS module using VC8 # the time_t types will still be compatible. .IF "$(WIN64)" == "undef" .IF "$(CCTYPE)" == "MSVC60" || \ "$(CCTYPE)" == "MSVC70" || "$(CCTYPE)" == "MSVC70FREE" BUILDOPT += -D_USE_32BIT_TIME_T .ENDIF .ENDIF LIBBASEFILES = \ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \ version.lib odbc32.lib odbccp32.lib comctl32.lib # The 64 bit Windows Server 2003 SP1 SDK compilers link against MSVCRT.dll, which # doesn't include the buffer overrun verification code used by the /GS switch. # Since the code links against libraries that are compiled with /GS, this # "security cookie verification" code must be included via bufferoverflow.lib. .IF "$(WIN64)" == "define" && "$(CCTYPE)" == "SDK2003SP1" LIBBASEFILES += bufferoverflowU.lib .ENDIF LIBFILES = $(LIBBASEFILES) $(LIBC) EXTRACFLAGS = -nologo -GF -W3 CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \ $(PCHFLAGS) $(OPTIMIZE) LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \ -libpath:"$(INST_COREDIR)" \ -machine:$(PROCESSOR_ARCHITECTURE) LIB_FLAGS = -nologo OBJOUT_FLAG = -Fo EXEOUT_FLAG = -Fe LIBOUT_FLAG = /out: .ENDIF CFLAGS_O = $(CFLAGS) $(BUILDOPT) .IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE" || \ "$(CCTYPE)" == "MSVC100" || "$(CCTYPE)" == "MSVC100FREE" LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'" .ELSE RSC_FLAGS = -DINCLUDE_MANIFEST .ENDIF # used to allow local linking flags that are not propogated into Config.pm, # currently unused # -- BKS, 12-12-1999 PRIV_LINK_FLAGS *= BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS) #################### do not edit below this line ####################### ############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ############## # Some old dmakes (including Sarathy's one at # http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip) # don't support logical OR (||) or logical AND (&&) in conditional # expressions and hence don't process this makefile correctly. Determine # whether this is the case so that we can give the user an error message. .IF 1 == 1 || 1 == 1 NEWDMAKE = define .ELSE NEWDMAKE = undef .ENDIF o *= .obj a *= .lib LKPRE = INPUT ( LKPOST = ) # # Rules # .SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res .c$(o): $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $< .c.i: $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@ .y.c: $(NOOP) $(o).dll: .IF "$(CCTYPE)" == "GCC" $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES) $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@ .ELSE $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \ -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL) $(EMBED_DLL_MANI) .ENDIF .rc.res: .IF "$(CCTYPE)" == "GCC" $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@ .ELSE $(RSC) -i.. -DINCLUDE_MANIFEST $< .ENDIF # # various targets MINIPERL = ..\miniperl.exe MINIDIR = .\mini PERLEXE = ..\perl.exe WPERLEXE = ..\wperl.exe PERLEXESTATIC = ..\perl-static.exe GLOBEXE = ..\perlglob.exe CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl MINIMOD = ..\lib\ExtUtils\Miniperl.pm X2P = ..\x2p\a2p.exe GENUUDMAP = ..\generate_uudmap.exe .IF "$(BUILD_STATIC)" == "define" PERLSTATIC = static .ELSE PERLSTATIC = .ENDIF # Unicode data files generated by mktables UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \ ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \ ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst # Directories of Unicode data files generated by mktables UNIDATADIR1 = ..\lib\unicore\To UNIDATADIR2 = ..\lib\unicore\lib PERLEXE_MANIFEST= .\perlexe.manifest PERLEXE_ICO = .\perlexe.ico PERLEXE_RES = .\perlexe.res PERLDLL_RES = # Nominate a target which causes extensions to be re-built # This used to be $(PERLEXE), but at worst it is the .dll that they depend # on and really only the interface - i.e. the .def file used to export symbols # from the .dll PERLDEP = perldll.def PL2BAT = bin\pl2bat.pl UTILS = \ ..\utils\h2ph \ ..\utils\splain \ ..\utils\perlbug \ ..\utils\pl2pm \ ..\utils\c2ph \ ..\utils\pstruct \ ..\utils\h2xs \ ..\utils\perldoc \ ..\utils\perlivp \ ..\utils\libnetcfg \ ..\utils\enc2xs \ ..\utils\piconv \ ..\utils\config_data \ ..\utils\corelist \ ..\utils\cpan \ ..\utils\xsubpp \ ..\utils\pod2html \ ..\utils\prove \ ..\utils\ptar \ ..\utils\ptardiff \ ..\utils\ptargrep \ ..\utils\cpanp-run-perl \ ..\utils\cpanp \ ..\utils\cpan2dist \ ..\utils\shasum \ ..\utils\instmodsh \ ..\utils\json_pp \ ..\x2p\find2perl \ ..\x2p\psed \ ..\x2p\s2p \ bin\exetype.pl \ bin\runperl.pl \ bin\pl2bat.pl \ bin\perlglob.pl \ bin\search.pl .IF "$(CCTYPE)" == "GCC" .IF "$(WIN64)" == "define" .IF "$(GCCCROSS)" == "define" CFGSH_TMPL = config.gc64 CFGH_TMPL = config_H.gc64 .ELSE CFGSH_TMPL = config.gc64nox CFGH_TMPL = config_H.gc64nox .ENDIF .ELSE CFGSH_TMPL = config.gc CFGH_TMPL = config_H.gc .ENDIF PERLIMPLIB = ..\libperl515$(a) PERLSTATICLIB = ..\libperl515s$(a) .ELSE .IF "$(WIN64)" == "define" CFGSH_TMPL = config.vc64 CFGH_TMPL = config_H.vc64 .ELSE CFGSH_TMPL = config.vc CFGH_TMPL = config_H.vc .ENDIF .ENDIF # makedef.pl must be updated if this changes, and this should normally # only change when there is an incompatible revision of the public API. PERLIMPLIB *= ..\perl515$(a) PERLSTATICLIB *= ..\perl515s$(a) PERLDLL = ..\perl515.dll XCOPY = xcopy /f /r /i /d /y RCOPY = xcopy /f /r /i /e /d /y NOOP = @rem MICROCORE_SRC = \ ..\av.c \ ..\deb.c \ ..\doio.c \ ..\doop.c \ ..\dump.c \ ..\globals.c \ ..\gv.c \ ..\mro.c \ ..\hv.c \ ..\locale.c \ ..\keywords.c \ ..\mathoms.c \ ..\mg.c \ ..\numeric.c \ ..\op.c \ ..\pad.c \ ..\perl.c \ ..\perlapi.c \ ..\perly.c \ ..\pp.c \ ..\pp_ctl.c \ ..\pp_hot.c \ ..\pp_pack.c \ ..\pp_sort.c \ ..\pp_sys.c \ ..\reentr.c \ ..\regcomp.c \ ..\regexec.c \ ..\run.c \ ..\scope.c \ ..\sv.c \ ..\taint.c \ ..\toke.c \ ..\universal.c \ ..\utf8.c \ ..\util.c EXTRACORE_SRC += perllib.c .IF "$(PERL_MALLOC)" == "define" EXTRACORE_SRC += ..\malloc.c .ENDIF EXTRACORE_SRC += ..\perlio.c WIN32_SRC = \ .\win32.c \ .\win32sck.c \ .\win32thread.c \ .\fcrypt.c # We need this for miniperl build unless we override canned # config.h #define building mini\* #.IF "$(USE_PERLIO)" == "define" WIN32_SRC += .\win32io.c #.ENDIF X2P_SRC = \ ..\x2p\a2p.c \ ..\x2p\hash.c \ ..\x2p\str.c \ ..\x2p\util.c \ ..\x2p\walk.c CORE_NOCFG_H = \ ..\av.h \ ..\cop.h \ ..\cv.h \ ..\dosish.h \ ..\embed.h \ ..\form.h \ ..\gv.h \ ..\handy.h \ ..\hv.h \ ..\iperlsys.h \ ..\mg.h \ ..\nostdio.h \ ..\op.h \ ..\opcode.h \ ..\perl.h \ ..\perlapi.h \ ..\perlsdio.h \ ..\perlsfio.h \ ..\perly.h \ ..\pp.h \ ..\proto.h \ ..\regcomp.h \ ..\regexp.h \ ..\scope.h \ ..\sv.h \ ..\thread.h \ ..\unixish.h \ ..\utf8.h \ ..\util.h \ ..\warnings.h \ ..\XSUB.h \ ..\EXTERN.h \ ..\perlvars.h \ ..\intrpvar.h \ .\include\dirent.h \ .\include\netdb.h \ .\include\sys\socket.h \ .\win32.h CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h UUDMAP_H = ..\uudmap.h BITCOUNT_H = ..\bitcount.h MG_DATA_H = ..\mg_data.h GENERATED_HEADERS = $(UUDMAP_H) $(BITCOUNT_H) $(MG_DATA_H) MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o)) CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o)) WIN32_OBJ = $(WIN32_SRC:db:+$(o)) MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)} MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)} MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ) DLL_OBJ = $(DYNALOADER) X2P_OBJ = $(X2P_SRC:db:+$(o)) GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o)) PERLDLL_OBJ = $(CORE_OBJ) PERLEXE_OBJ = perlmain$(o) PERLEXEST_OBJ = perlmainst$(o) PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ) .IF "$(USE_SETARGV)" != "" SETARGV_OBJ = setargv$(o) .ENDIF .IF "$(ALL_STATIC)" == "define" # some exclusions, unfortunately, until fixed: # - Win32 extension contains overlapped symbols with win32.c (BUG!) # - MakeMaker isn't capable enough for SDBM_File (smaller bug) # - Encode (encoding search algorithm relies on shared library?) STATIC_EXT = * !Win32 !SDBM_File !Encode .ELSE # specify static extensions here, for example: #STATIC_EXT = Cwd Compress/Raw/Zlib STATIC_EXT = Win32CORE .ENDIF DYNALOADER = ..\DynaLoader$(o) # vars must be separated by "\t+~\t+", since we're using the tempfile # version of config_sh.pl (we were overflowing someone's buffer by # trying to fit them all on the command line) # -- BKS 10-17-1999 CFG_VARS = \ INST_DRV=$(INST_DRV) ~ \ INST_TOP=$(INST_TOP) ~ \ INST_VER=$(INST_VER) ~ \ INST_ARCH=$(INST_ARCH) ~ \ archname=$(ARCHNAME) ~ \ cc=$(CC) ~ \ ld=$(LINK32) ~ \ ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \ cf_email=$(EMAIL) ~ \ d_mymalloc=$(PERL_MALLOC) ~ \ libs=$(LIBFILES:f) ~ \ incpath=$(CCINCDIR) ~ \ libperl=$(PERLIMPLIB:f) ~ \ libpth=$(CCLIBDIR);$(EXTRALIBDIRS) ~ \ libc=$(LIBC) ~ \ make=dmake ~ \ _o=$(o) ~ \ obj_ext=$(o) ~ \ _a=$(a) ~ \ lib_ext=$(a) ~ \ static_ext=$(STATIC_EXT) ~ \ usethreads=$(USE_ITHREADS) ~ \ useithreads=$(USE_ITHREADS) ~ \ usemultiplicity=$(USE_MULTI) ~ \ useperlio=$(USE_PERLIO) ~ \ uselargefiles=$(USE_LARGE_FILES) ~ \ usesitecustomize=$(USE_SITECUST) ~ \ LINK_FLAGS=$(LINK_FLAGS) ~ \ optimize=$(OPTIMIZE) ICWD = -I..\dist\Cwd -I..\dist\Cwd\lib # # Top targets # all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \ $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \ $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC) regnodes : ..\regnodes.h ..\regcomp$(o) : ..\regnodes.h ..\regcharclass.h ..\regexec$(o) : ..\regnodes.h ..\regcharclass.h reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) \ $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \ $(X2P) Extensions_reonly static: $(PERLEXESTATIC) #---------------------------------------------------------------- CHECKDMAKE : .IF "$(NEWDMAKE)" == "define" $(NOOP) .ELSE @echo Your dmake doesn't support ^|^| or ^&^& in conditional expressions. @echo Please get the latest dmake from http://search.cpan.org/dist/dmake/ @exit 1 .ENDIF $(GLOBEXE) : perlglob$(o) .IF "$(CCTYPE)" == "GCC" $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES) .ELSE $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \ perlglob$(o) setargv$(o) $(EMBED_EXE_MANI) .ENDIF perlglob$(o) : perlglob.c config.w32 : $(CFGSH_TMPL) copy $(CFGSH_TMPL) config.w32 .\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H) -del /f config.h copy $(CFGH_TMPL) config.h ..\git_version.h : $(MINIPERL) ..\make_patchnum.pl cd .. && miniperl -Ilib make_patchnum.pl # make sure that we recompile perl.c if the git version changes ..\perl$(o) : ..\git_version.h ..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \ $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh # this target is for when changes to the main config.sh happen. # edit config.gc, then make perl using GCC in a minimal configuration (i.e. # with MULTI, ITHREADS, IMP_SYS, LARGE_FILES and PERLIO off), then make # this target to regenerate config_H.gc. # unfortunately, some further manual editing is also then required to restore all # the special _MSC_VER handling that is otherwise lost. # repeat for config.gc64 and config_H.gc64, and again for config.gc64nox and # config_H.gc64nox, if you have suitable build environments, otherwise hand-edit # them to maintain the same differences with config.gc and config_H.gc as before. regen_config_h: $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \ $(CFGSH_TMPL) > ..\config.sh $(MINIPERL) -I..\lib ..\configpm --chdir=.. -del /f $(CFGH_TMPL) -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" rename config.h $(CFGH_TMPL) $(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl $(MINIPERL) -I..\lib ..\configpm --chdir=.. if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL) $(XCOPY) ..\*.h $(COREDIR)\*.* $(XCOPY) *.h $(COREDIR)\*.* $(RCOPY) include $(COREDIR)\*.* $(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \ || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE) ..\lib\buildcustomize.pl: $(MINIPERL) ..\write_buildcustomize.pl $(MINIPERL) -I..\lib ..\write_buildcustomize.pl .. >..\lib\buildcustomize.pl $(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS) .IF "$(CCTYPE)" == "GCC" $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(MINI_OBJ) $(LIBFILES) $(LKPOST)) .ELSE $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \ @$(mktmp $(LIBFILES) $(MINI_OBJ)) $(EMBED_EXE_MANI) .ENDIF $(MINIDIR) : if not exist "$(MINIDIR)" mkdir "$(MINIDIR)" $(MINICORE_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c $(MINIWIN32_OBJ) : $(CORE_NOCFG_H) $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c # -DPERL_IMPLICIT_SYS needs C++ for perllib.c # rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless # unless the .IF is true), so instead we use a .ELSE with the default. # This is the only file that depends on perlhost.h, vmem.h, and vdir.h perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h .IF "$(USE_IMP_SYS)" == "define" $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c .ELSE $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c .ENDIF # 1. we don't want to rebuild miniperl.exe when config.h changes # 2. we don't want to rebuild miniperl.exe with non-default config.h # 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it $(MINI_OBJ) : $(CORE_NOCFG_H) $(WIN32_OBJ) : $(CORE_H) $(CORE_OBJ) : $(CORE_H) $(DLL_OBJ) : $(CORE_H) $(X2P_OBJ) : $(CORE_H) perldll.def : $(MINIPERL) $(CONFIGPM) ..\embed.fnc ..\makedef.pl create_perllibst_h.pl $(MINIPERL) -I..\lib create_perllibst_h.pl $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \ $(BUILDOPT) CCTYPE=$(CCTYPE) TARG_DIR=..\ > perldll.def $(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static .IF "$(CCTYPE)" == "GCC" $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(PERLDLL_OBJ) \ $(shell @type Extensions_static) \ $(LIBFILES) $(LKPOST)) $(IMPLIB) --output-lib $(PERLIMPLIB) \ --dllname $(PERLDLL:b).dll \ --def perldll.def \ --base-file perl.base \ --output-exp perl.exp $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(PERLDLL_OBJ) \ $(shell @type Extensions_static) \ $(LIBFILES) perl.exp $(LKPOST)) .ELSE $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \ @Extensions_static \ @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \ $(PERLDLL_RES) $(PERLDLL_OBJ)) $(EMBED_DLL_MANI) .ENDIF $(XCOPY) $(PERLIMPLIB) $(COREDIR) $(PERLSTATICLIB): Extensions_static .IF "$(CCTYPE)" == "GCC" # XXX: It would be nice if MinGW's ar accepted a temporary file, but this # doesn't seem to work: # $(LIB32) $(LIB_FLAGS) $@ \ # $(mktmp $(LKPRE) $(shell @type Extensions_static) \ # $(PERLDLL_OBJ) $(LKPOST)) $(LIB32) $(LIB_FLAGS) $@ \ $(shell @type Extensions_static) \ $(PERLDLL_OBJ) .ELSE $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \ @$(mktmp $(PERLDLL_OBJ)) .ENDIF $(XCOPY) $(PERLSTATICLIB) $(COREDIR) $(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO) $(MINIMOD) : $(MINIPERL) ..\minimod.pl cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm ..\x2p\a2p$(o) : ..\x2p\a2p.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c ..\x2p\hash$(o) : ..\x2p\hash.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c ..\x2p\str$(o) : ..\x2p\str.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c ..\x2p\util$(o) : ..\x2p\util.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c ..\x2p\walk$(o) : ..\x2p\walk.c $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c $(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions $(MINIPERL) -I..\lib ..\x2p\find2perl.PL $(MINIPERL) -I..\lib ..\x2p\s2p.PL .IF "$(CCTYPE)" == "GCC" $(LINK32) -v -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(X2P_OBJ) $(LIBFILES) $(LKPOST)) .ELSE $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \ @$(mktmp $(LIBFILES) $(X2P_OBJ)) $(EMBED_EXE_MANI) .ENDIF $(MINIDIR)\globals$(o) : $(GENERATED_HEADERS) $(UUDMAP_H) $(MG_DATA_H) : $(BITCOUNT_H) $(BITCOUNT_H) : $(GENUUDMAP) $(GENUUDMAP) $(GENERATED_HEADERS) $(GENUUDMAP_OBJ) : ..\mg_raw.h $(GENUUDMAP) : $(GENUUDMAP_OBJ) .IF "$(CCTYPE)" == "GCC" $(LINK32) -v -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(GENUUDMAP_OBJ) $(LIBFILES) $(LKPOST)) .ELSE $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \ @$(mktmp $(LIBFILES) $(GENUUDMAP_OBJ)) $(EMBED_EXE_MANI) .ENDIF perlmain.c : runperl.c copy runperl.c perlmain.c perlmain$(o) : perlmain.c $(CC) $(CFLAGS_O:s,-DPERLDLL,-UPERLDLL,) $(OBJOUT_FLAG)$@ -c perlmain.c perlmainst.c : runperl.c copy runperl.c perlmainst.c perlmainst$(o) : perlmainst.c $(CC) $(CFLAGS_O) $(OBJOUT_FLAG)$@ -c perlmainst.c $(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES) .IF "$(CCTYPE)" == "GCC" $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES) .ELSE $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES) $(EMBED_EXE_MANI) .ENDIF copy $(PERLEXE) $(WPERLEXE) $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS $(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES) .IF "$(CCTYPE)" == "GCC" $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \ $(mktmp $(LKPRE) $(shell @type Extensions_static) \ $(PERLSTATICLIB) $(LIBFILES) $(PERLEXEST_OBJ) \ $(PERLEXE_RES) $(LKPOST)) .ELSE $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \ @Extensions_static $(PERLSTATICLIB) /PDB:NONE \ $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES) $(EMBED_EXE_MANI) .ENDIF MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs $(MINIPERL) -I..\lib $(ICWD) ..\mkppport #------------------------------------------------------------------------------- # There's no direct way to mark a dependency on # DynaLoader.pm, so this will have to do Extensions : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) $(XCOPY) ..\*.h $(COREDIR)\*.* $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic Extensions_reonly : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER) $(XCOPY) ..\*.h $(COREDIR)\*.* $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re Extensions_static : ..\make_ext.pl ..\lib\buildcustomize.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM) $(XCOPY) ..\*.h $(COREDIR)\*.* $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static Extensions_nonxs : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) $(XCOPY) ..\*.h $(COREDIR)\*.* $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs $(DYNALOADER) : ..\make_ext.pl ..\lib\buildcustomize.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs $(XCOPY) ..\*.h $(COREDIR)\*.* $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader Extensions_clean : -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean Extensions_realclean : -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean #------------------------------------------------------------------------------- doc: $(PERLEXE) ..\pod\perltoc.pod $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse # Note that this next section is parsed (and regenerated) by pod/buildtoc # so please check that script before making structural changes here utils: $(PERLEXE) $(X2P) cd ..\utils && $(MAKE) PERL=$(MINIPERL) copy ..\README.aix ..\pod\perlaix.pod copy ..\README.amiga ..\pod\perlamiga.pod copy ..\README.beos ..\pod\perlbeos.pod copy ..\README.bs2000 ..\pod\perlbs2000.pod copy ..\README.ce ..\pod\perlce.pod copy ..\README.cn ..\pod\perlcn.pod copy ..\README.cygwin ..\pod\perlcygwin.pod copy ..\README.dgux ..\pod\perldgux.pod copy ..\README.dos ..\pod\perldos.pod copy ..\README.epoc ..\pod\perlepoc.pod copy ..\README.freebsd ..\pod\perlfreebsd.pod copy ..\README.haiku ..\pod\perlhaiku.pod copy ..\README.hpux ..\pod\perlhpux.pod copy ..\README.hurd ..\pod\perlhurd.pod copy ..\README.irix ..\pod\perlirix.pod copy ..\README.jp ..\pod\perljp.pod copy ..\README.ko ..\pod\perlko.pod copy ..\README.linux ..\pod\perllinux.pod copy ..\README.macos ..\pod\perlmacos.pod copy ..\README.macosx ..\pod\perlmacosx.pod copy ..\README.mpeix ..\pod\perlmpeix.pod copy ..\README.netware ..\pod\perlnetware.pod copy ..\README.openbsd ..\pod\perlopenbsd.pod copy ..\README.os2 ..\pod\perlos2.pod copy ..\README.os390 ..\pod\perlos390.pod copy ..\README.os400 ..\pod\perlos400.pod copy ..\README.plan9 ..\pod\perlplan9.pod copy ..\README.qnx ..\pod\perlqnx.pod copy ..\README.riscos ..\pod\perlriscos.pod copy ..\README.solaris ..\pod\perlsolaris.pod copy ..\README.symbian ..\pod\perlsymbian.pod copy ..\README.tru64 ..\pod\perltru64.pod copy ..\README.tw ..\pod\perltw.pod copy ..\README.uts ..\pod\perluts.pod copy ..\README.vmesa ..\pod\perlvmesa.pod copy ..\README.vos ..\pod\perlvos.pod copy ..\README.win32 ..\pod\perlwin32.pod copy ..\pod\perldelta.pod ..\pod\perl5155delta.pod $(PERLEXE) $(PL2BAT) $(UTILS) $(PERLEXE) $(ICWD) ..\autodoc.pl .. $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q ..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs $(PERLEXE) -f ..\pod\buildtoc --build-toc -q # Note that the pod cleanup in this next section is parsed (and regenerated # by pod/buildtoc so please check that script before making changes here distclean: realclean -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \ $(PERLEXESTATIC) $(PERLSTATICLIB) -del /f *.def *.map -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm -del /f $(LIBDIR)\File\Glob.pm -del /f $(LIBDIR)\Storable.pm -del /f $(LIBDIR)\Sys\Hostname.pm -del /f $(LIBDIR)\Time\HiRes.pm -del /f $(LIBDIR)\Unicode\Normalize.pm -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm -del /f $(LIBDIR)\Win32.pm -del /f $(LIBDIR)\Win32CORE.pm -del /f $(LIBDIR)\Win32API\File.pm -del /f $(LIBDIR)\Win32API\File\cFile.pc -del /f $(LIBDIR)\buildcustomize.pl -del /f $(DISTDIR)\XSLoader\XSLoader.pm -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads -if exist $(LIBDIR)\Tie\Hash rmdir /s /q $(LIBDIR)\Tie\Hash -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API -cd $(PODDIR) && del /f *.html *.bat \ perl5155delta.pod perlaix.pod perlamiga.pod perlapi.pod \ perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \ perlcygwin.pod perldgux.pod perldos.pod perlepoc.pod \ perlfreebsd.pod perlhaiku.pod perlhpux.pod perlhurd.pod \ perlintern.pod perlirix.pod perljp.pod perlko.pod perllinux.pod \ perlmacos.pod perlmacosx.pod perlmodlib.pod perlmpeix.pod \ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \ perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \ perlsolaris.pod perlsymbian.pod perltoc.pod perltru64.pod \ perltw.pod perluniprops.pod perluts.pod perlvmesa.pod \ perlvos.pod perlwin32.pod -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \ perldoc perlivp libnetcfg enc2xs piconv cpan *.bat \ xsubpp pod2html instmodsh json_pp prove ptar ptardiff ptargrep cpanp-run-perl cpanp cpan2dist shasum corelist config_data -cd ..\x2p && del /f find2perl s2p psed *.bat -del /f ..\config.sh perlmain.c dlutils.c config.h.new \ perlmainst.c -del /f $(CONFIGPM) -del /f ..\lib\Config_git.pl -del /f bin\*.bat -del /f perllibst.h -del /f $(PERLEXE_RES) perl.base -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h -cd $(EXTDIR) && del /s *.def Makefile Makefile.old -cd $(DISTDIR) && del /s *.def Makefile Makefile.old -cd $(CPANDIR) && del /s *.def Makefile Makefile.old -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) -if exist $(COREDIR) rmdir /s /q $(COREDIR) -if exist pod2htmd.tmp del pod2htmd.tmp -if exist pod2htmi.tmp del pod2htmi.tmp -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR) -del /f ..\t\test_state install : all installbare installhtml installbare : utils ..\pod\perltoc.pod $(PERLEXE) ..\installperl if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.* if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.* $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.* if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.* if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.* $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.* installhtml : doc $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.* inst_lib : $(CONFIGPM) $(RCOPY) ..\lib $(INST_LIB)\*.* $(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs cd ..\lib\unicore && \ ..\$(MINIPERL) -I.. -I..\..\dist\Cwd\lib -I..\..\dist\Cwd mktables -P ..\..\pod -maketest -makelist -p minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils $(XCOPY) $(MINIPERL) ..\t\$(NULL) if exist ..\t\perl.exe del /f ..\t\perl.exe rename ..\t\miniperl.exe perl.exe $(XCOPY) $(GLOBEXE) ..\t\$(NULL) attrib -r ..\t\*.* cd ..\t && \ $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t test-prep : all utils ..\pod\perltoc.pod $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL) .IF "$(CCTYPE)" == "GCC" # If building with gcc versions 4.x.x or greater, then # the GCC helper DLL will also need copied to the test directory. # The name of the dll can change, depending upon which vendor has supplied # your compiler, and upon the values of "x". # libstdc++-6.dll is copied if it exists as it, too, may then be needed. # Without this copying, the op/taint.t test script will fail. if exist $(CCHOME)\bin\libgcc_s_sjlj-1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_sjlj-1.dll ..\t\$(NULL) if exist $(CCHOME)\bin\libgcc_s_dw2-1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_dw2-1.dll ..\t\$(NULL) if exist $(CCHOME)\bin\libgcc_s_1.dll $(XCOPY) $(CCHOME)\bin\libgcc_s_1.dll ..\t\$(NULL) if exist $(CCHOME)\bin\w64gcc_s_sjlj-1.dll $(XCOPY) $(CCHOME)\bin\w64gcc_s_sjlj-1.dll ..\t\$(NULL) if exist $(CCHOME)\bin\libstdc++-6.dll $(XCOPY) $(CCHOME)\bin\libstdc++-6.dll ..\t\$(NULL) .ENDIF test : test-prep set PERL_STATIC_EXT=$(STATIC_EXT) && \ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) test-reonly : reonly utils $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL) cd ..\t && \ $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \ cd ..\win32 regen : cd .. && regen.pl && cd win32 test-notty : test-prep set PERL_STATIC_EXT=$(STATIC_EXT) && \ set PERL_SKIP_TTY_TEST=1 && \ cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES) _test : $(XCOPY) $(PERLEXE) ..\t\$(NULL) $(XCOPY) $(PERLDLL) ..\t\$(NULL) $(XCOPY) $(GLOBEXE) ..\t\$(NULL) set PERL_STATIC_EXT=$(STATIC_EXT) && \ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES) _clean : -@erase miniperlmain$(o) -@erase $(MINIPERL) -@erase perlglob$(o) -@erase perlmain$(o) -@erase perlmainst$(o) -@erase config.w32 -@erase /f config.h -@erase /f ..\git_version.h -@erase $(GLOBEXE) -@erase $(PERLEXE) -@erase $(WPERLEXE) -@erase $(PERLEXESTATIC) -@erase $(PERLSTATICLIB) -@erase $(PERLDLL) -@erase $(CORE_OBJ) -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(GENERATED_HEADERS) -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1) -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2) -@erase $(UNIDATAFILES) -@erase $(WIN32_OBJ) -@erase $(DLL_OBJ) -@erase $(X2P_OBJ) -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat -@erase ..\x2p\*.exe ..\x2p\*.bat -@erase *.ilk -@erase *.pdb -@erase *.tds -@erase Extensions_static clean : Extensions_clean _clean realclean : Extensions_realclean _clean # Handy way to run perlbug -ok without having to install and run the # installed perlbug. We don't re-run the tests here - we trust the user. # Please *don't* use this unless all tests pass. # If you want to report test failures, use "dmake nok" instead. ok: utils $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" okfile: utils $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok nok: utils $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" nokfile: utils $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok