path: root/hints/hpux.sh

#!/usr/bin/sh

### SYSTEM ARCHITECTURE

# Determine the architecture type of this system.
# Keep leading tab below -- Configure Black Magic -- RAM, 03/02/97
	xxOsRevMajor=`uname -r | sed -e 's/^[^0-9]*//' | cut -d. -f1`;
if [ "$xxOsRevMajor" -ge 10 ]; then
    # This system is running >= 10.x

    # Tested on 10.01 PA1.x and 10.20 PA[12].x.
    # Idea: Scan /usr/include/sys/unistd.h for matches with
    # "#define CPU_* `getconf # CPU_VERSION`" to determine CPU type.
    # Note the text following "CPU_" is used, *NOT* the comment.
    #
    # ASSUMPTIONS: Numbers will continue to be defined in hex -- and in
    # /usr/include/sys/unistd.h -- and the CPU_* #defines will be kept
    # up to date with new CPU/OS releases.
    xxcpu=`getconf CPU_VERSION`; # Get the number.
    xxcpu=`printf '0x%x' $xxcpu`; # convert to hex
    archname=`sed -n -e "s/^#[ \t]*define[ \t]*CPU_//p" /usr/include/sys/unistd.h |
	sed -n -e "s/[ \t]*$xxcpu[ \t].*//p" |
	sed -e s/_RISC/-RISC/ -e s/HP_// -e s/_/./`;
else
    # This system is running <= 9.x
    # Tested on 9.0[57] PA and [78].0 MC680[23]0.  Idea: After removing
    # MC6888[12] from context string, use first CPU identifier.
    #
    # ASSUMPTION: Only CPU identifiers contain no lowercase letters.
    archname=`getcontext | tr ' ' '\012' | grep -v '[a-z]' | grep -v MC688 |
	sed -e 's/HP-//' -e 1q`;
    selecttype='int *'
    fi
    # For some strange reason, the u32align test from Configure hangs in
    # HP-UX 10.20 since the December 2001 patches.  So hint it to avoid
    # the test.
    if [ "$xxOsRevMajor" -le 10 ]; then
	d_u32align=$define
    fi

echo "Archname is $archname"


### HP-UX OS specific behaviour

# -ldbm is obsolete and should not be used
# -lBSD contains BSD-style duplicates of SVR4 routines that cause confusion
# -lPW is obsolete and should not be used
# The libraries crypt, malloc, ndir, and net are empty.
set `echo "X $libswanted " | sed -e 's/ ld / /' -e 's/ dbm / /' -e 's/ BSD / /' -e 's/ PW / /'`
shift
libswanted="$*"

cc=${cc:-cc}
ar=/usr/bin/ar	# Yes, truly override.  We do not want the GNU ar.
full_ar=$ar	# I repeat, no GNU ar.  arrr.

set `echo "X $ccflags " | sed -e 's/ -A[ea] / /' -e 's/ -D_HPUX_SOURCE / /'`
shift
	cc_cppflags="$* -D_HPUX_SOURCE"
cppflags="-Aa -D__STDC_EXT__ $cc_cppflags"

case "$prefix" in
    "") prefix='/opt/perl5' ;;
    esac

    gnu_as=no
    gnu_ld=no
case `$cc -v 2>&1`"" in
    *gcc*)  ccisgcc="$define"
	    ccflags="$cc_cppflags"
	    if [ "X$gccversion" = "X" ]; then
		# Done too late in Configure if hinted
		gccversion=`$cc --version`
		fi
	    case "`getconf KERNEL_BITS 2>/dev/null`" in
		*64*)
		    echo "main(){}">try.c
		    case "$gccversion" in
			3*) ccflags="$ccflags -mpa-risc-2-0"
			    ;;
			*)  # gcc with gas will not accept +DA2.0
			    case "`$cc -c -Wa,+DA2.0 try.c 2>&1`" in
				*"+DA2.0"*)		# gas
				    gnu_as=yes
				    ;;
				*)			# HPas
				    ccflags="$ccflags -Wa,+DA2.0"
				    ;;
				esac
			    ;;
			esac
		    # gcc with gld will not accept +vnocompatwarnings
		    case "`$cc -o try -Wl,+vnocompatwarnings try.c 2>&1`" in
			*"+vnocompat"*)		# gld
			    gnu_ld=yes
			    ;;
			*)			# HPld
                           case "$gccversion" in
                               [12]*)
                                   ldflags="$ldflags -Wl,+vnocompatwarnings"
                                   ccflags="$ccflags -Wl,+vnocompatwarnings"
                                   ;;
                               esac
			    ;;
			esac
		    rm -f try.c
		    ;;
		esac
	    ;;
    *)      ccisgcc=''
	    ccversion=`which cc | xargs what | awk '/Compiler/{print $2}'`
	    case "$ccflags" in
	    "-Ae "*) ;;
	    *) ccflags="-Ae $cc_cppflags -Wl,+vnocompatwarnings" ;;
	    esac
	    # Needed because cpp does only support -Aa (not -Ae)
	    cpplast='-'
	    cppminus='-'
	    cppstdin='cc -E -Aa -D__STDC_EXT__'
	    cpprun=$cppstdin
#	    case "$d_casti32" in
#		"") d_casti32='undef' ;;
#		esac
	    ;;
    esac

# When HP-UX runs a script with "#!", it sets argv[0] to the script name.
toke_cflags='ccflags="$ccflags -DARG_ZERO_IS_SCRIPT"'

### 64 BITNESS

# Some gcc versions do native 64 bit long (e.g. 2.9-hppa-000310 and gcc-3.0)
# We have to force 64bitness to go search the right libraries
    gcc_64native=no
case "$ccisgcc" in
    $define|true|[Yy])
	echo 'int main(){long l;printf("%d\\n",sizeof(l));}'>try.c
	$cc -o try $ccflags $ldflags try.c
	if [ "`try`" = "8" ]; then
	    cat <<EOM >&4

*** This version of gcc uses 64 bit longs. -Duse64bitall is
*** implicitly set to enable continuation
EOM
	    use64bitall=$define
	    gcc_64native=yes
	    fi
	;;
    esac

case "$use64bitall" in
    $define|true|[yY]*) use64bitint="$define" ;;
    esac

case "$usemorebits" in
    $define|true|[yY]*) use64bitint="$define"; uselongdouble="$define" ;;
    esac

case "$uselongdouble" in
    $define|true|[yY]*)
	cat <<EOM >&4

*** long doubles are not (yet) supported on HP-UX (any version)
*** Until it does, we cannot continue, aborting.
EOM
	exit 1 ;;
    esac

case "$use64bitint" in
    $define|true|[Yy])

	if [ "$xxOsRevMajor" -lt 11 ]; then
	    cat <<EOM >&4

*** 64-bit compilation is not supported on HP-UX $xxOsRevMajor.
*** You need at least HP-UX 11.0.
*** Cannot continue, aborting.
EOM
	    exit 1
	    fi

	# Set libc and the library paths
	case "$archname" in
	    PA-RISC*)
		loclibpth="$loclibpth /lib/pa20_64"
		libc='/lib/pa20_64/libc.sl' ;;
	    IA64*) 
		loclibpth="$loclibpth /usr/lib/hpux64"
		libc='/usr/lib/hpux64/libc.so' ;;
	    esac
	if [ ! -f "$libc" ]; then
	    cat <<EOM >&4

*** You do not seem to have the 64-bit libc.
*** I cannot find the file $libc.
*** Cannot continue, aborting.
EOM
	    exit 1
	    fi

	case "$ccisgcc" in
	    $define|true|[Yy])
		# For the moment, don't care that it ain't supported (yet)
		# by gcc (up to and including 2.95.3), cause it'll crash
		# anyway. Expect auto-detection of 64-bit enabled gcc on
		# HP-UX soon, including a user-friendly exit
		case $gcc_64native in
		    no) case "$gccversion" in
			    [12]*)  ccflags="$ccflags -mlp64"
				    ldflags="$ldflags -Wl,+DD64"
				    ;;
			    esac
			;;
		    esac
		;;
	    *)
		ccflags="$ccflags +DD64"
		ldflags="$ldflags +DD64"
		;;
	    esac

	# Reset the library checker to make sure libraries
	# are the right type
	libscheck='case "`/usr/bin/file $xxx`" in
		       *ELF-64*|*LP64*|*PA-RISC2.0*) ;;
		       *) xxx=/no/64-bit$xxx ;;
		       esac'

	;;

    *)	# Not in 64-bit mode

	case "$archname" in
	    PA-RISC*)
		libc='/lib/libc.sl' ;;
	    IA64*) 
		loclibpth="$loclibpth /usr/lib/hpux32"
		libc='/usr/lib/hpux32/libc.so' ;;
	    esac
	;;
    esac

# By setting the deferred flag below, this means that if you run perl
# on a system that does not have the required shared library that you
# linked it with, it will die when you try to access a symbol in the
# (missing) shared library.  If you would rather know at perl startup
# time that you are missing an important shared library, switch the
# comments so that immediate, rather than deferred loading is
# performed.  Even with immediate loading, you can postpone errors for
# undefined (or multiply defined) routines until actual access by
# adding the "nonfatal" option.
# ccdlflags="-Wl,-E -Wl,-B,immediate $ccdlflags"
# ccdlflags="-Wl,-E -Wl,-B,immediate,-B,nonfatal $ccdlflags"
if [ "$gnu_ld" = "yes" ]; then
    ccdlflags="-Wl,-E $ccdlflags"
else
    ccdlflags="-Wl,-E -Wl,-B,deferred $ccdlflags"
    fi


### COMPILER SPECIFICS

## Local restrictions (point to README.hpux to lift these)

## Optimization limits
cat >try.c <<EOF
#include <sys/resource.h>

int main ()
{
    struct rlimit rl;
    int i = getrlimit (RLIMIT_DATA, &rl);
    printf ("%d\n", rl.rlim_cur / (1024 * 1024));
    } /* main */
EOF
$cc -o try $ccflags $ldflags try.c
	maxdsiz=`try`
rm -f try try.c core
if [ $maxdsiz -le 64 ]; then
    # 64 Mb is probably not enough to optimize toke.c
    # and regexp.c with -O2
    cat <<EOM >&4
Your kernel limits the data section of your programs to $maxdsiz Mb,
which is (sadly) not enough to fully optimize some parts of the
perl binary. I'll try to use a lower optimization level for
those parts. If you are a sysadmin, and you *do* want full
optimization, raise the 'maxdsiz' kernel configuration parameter
to at least 0x08000000 (128 Mb) and rebuild your kernel.
EOM
regexec_cflags=''
    fi

case "$ccisgcc" in
    $define|true|[Yy])
	
	case "$optimize" in
	    "")           optimize="-g -O" ;;
	    *O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
	    esac
	#ld="$cc"
	ld=/usr/bin/ld
	cccdlflags='-fPIC'
	#lddlflags='-shared'
	lddlflags='-b'
	case "$optimize" in
	    *-g*-O*|*-O*-g*)
		# gcc without gas will not accept -g
		echo "main(){}">try.c
		case "`$cc $optimize -c try.c 2>&1`" in
		    *"-g option disabled"*)
			set `echo "X $optimize " | sed -e 's/ -g / /'`
			shift
			optimize="$*"
			;;
		    esac
		;;
	    esac
	if [ $maxdsiz -le 64 ]; then
	    case "$optimize" in
		*O2*)	opt=`echo "$optimize" | sed -e 's/O2/O1/'`
			toke_cflags="$toke_cflags;optimize=\"$opt\""
			regexec_cflags="optimize=\"$opt\""
			;;
		esac
	    fi
	;;

    *)	# HP's compiler cannot combine -g and -O
	case "$optimize" in
	    "")           optimize="+O2 +Onolimit" ;;
	    *O[3456789]*) optimize=`echo "$optimize" | sed -e 's/O[3-9]/O2/'` ;;
	    esac
	if [ $maxdsiz -le 64 ]; then
	    case "$optimize" in
		*-O*|\
		*O2*)	opt=`echo "$optimize" | sed -e 's/-O/+O2/' -e 's/O2/O1/' -e 's/ *+Onolimit//'`
			toke_cflags="$toke_cflags;optimize=\"$opt\""
			regexec_cflags="optimize=\"$opt\""
			;;
		esac
	    fi
	ld=/usr/bin/ld
	cccdlflags='+Z'
	lddlflags='-b +vnocompatwarnings'
	;;
    esac

## LARGEFILES

#case "$uselargefiles-$ccisgcc" in
#    "$define-$define"|'-define') 
#	cat <<EOM >&4
#
#*** I'm ignoring large files for this build because
#*** I don't know how to do use large files in HP-UX using gcc.
#
#EOM
#	uselargefiles="$undef"
#	;;
#    esac

cat >UU/uselargefiles.cbu <<'EOCBU'
# This script UU/uselargefiles.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use large files.
case "$uselargefiles" in
    ""|$define|true|[yY]*)
	# there are largefile flags available via getconf(1)
	# but we cheat for now.  (Keep that in the left margin.)
ccflags_uselargefiles="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"

	case "$ccflags" in
	*" $ccflags_uselargefiles") ;;
	*) ccflags="$ccflags $ccflags_uselargefiles" ;;
	esac

        if test -z "$ccisgcc" -a -z "$gccversion"; then
	    # The strict ANSI mode (-Aa) doesn't like large files.
	    ccflags=`echo " $ccflags "|sed 's@ -Aa @ @g'`
	    case "$ccflags" in
		*-Ae*) ;;
		*)     ccflags="$ccflags -Ae" ;;
		esac
	    fi
	;;
    esac
EOCBU

# THREADING

# This script UU/usethreads.cbu will get 'called-back' by Configure 
# after it has prompted the user for whether to use threads.
cat >UU/usethreads.cbu <<'EOCBU'
case "$usethreads" in
    $define|true|[yY]*)
	if [ "$xxOsRevMajor" -lt 10 ]; then
	    cat <<EOM >&4

HP-UX $xxOsRevMajor cannot support POSIX threads.
Consider upgrading to at least HP-UX 11.
Cannot continue, aborting.
EOM
	    exit 1
	    fi

	if [ "$xxOsRevMajor" -eq 10 ]; then
	    # Under 10.X, a threaded perl can be built
	    if [ -f /usr/include/pthread.h ]; then
		if [ -f /usr/lib/libcma.sl ]; then
		    # DCE (from Core OS CD) is installed

                   # Check if it is pristine, or patched
                   cmavsn=`what /usr/lib/libcma.sl 2>&1 | grep 1996`
                   if [ ! -z "$cmavsn" ]; then
                       cat <<EOM >&4

***************************************************************************

Perl will support threading through /usr/lib/libcma.sl from
the HP DCE package, but the version found is too old to be
reliable.

If you are not depending on this specific version of the library,
consider to upgrade using patch PHSS_23672 (read README.hpux)

***************************************************************************

(sleeping for 10 seconds...)
EOM
			  sleep 10
                       fi

		    # It needs # libcma and OLD_PTHREADS_API. Also
		    # <pthread.h> needs to be #included before any
		    # other includes (in perl.h)

		    # HP-UX 10.X uses the old pthreads API
		    d_oldpthreads="$define"

		    # include libcma before all the others
		    libswanted="cma $libswanted"

		    # tell perl.h to include <pthread.h> before other
		    # include files
		    ccflags="$ccflags -DPTHREAD_H_FIRST"

		    # CMA redefines select to cma_select, and cma_select
		    # expects int * instead of fd_set * (just like 9.X)
		    selecttype='int *'

		elif [ -f /usr/lib/libpthread.sl ]; then
		    # PTH package is installed
		    libswanted="pthread $libswanted"
		else
		    libswanted="no_threads_available"
		    fi
	    else
		libswanted="no_threads_available"
		fi

	    if [ $libswanted = "no_threads_available" ]; then
		cat <<EOM >&4

In HP-UX 10.X for POSIX threads you need both of the files
/usr/include/pthread.h and either /usr/lib/libcma.sl or /usr/lib/libpthread.sl.
Either you must upgrade to HP-UX 11 or install a posix thread library:

    DCE-CoreTools from HP-UX 10.20 Hardware Extensions 3.0 CD (B3920-13941)

or

    PTH package from e.g. http://hpux.tn.tudelft.nl/hppd/hpux/alpha.html

Cannot continue, aborting.
EOM
		exit 1
		fi
	else
	    # 12 may want upping the _POSIX_C_SOURCE datestamp...
	    ccflags=" -D_POSIX_C_SOURCE=199506L $ccflags"
	    set `echo X "$libswanted "| sed -e 's/ c / pthread c /'`
	    shift
	    libswanted="$*"
	    fi

	usemymalloc='n'
	;;
    esac
EOCBU

# fpclassify() is a macro, the library call is Fpclassify
d_fpclassify='define'