path: root/t/porting/diag.t

#!/usr/bin/perl

BEGIN {
  @INC = '..' if -f '../TestInit.pm';
}
use TestInit qw(T); # T is chdir to the top level

use warnings;
use strict;
use Config;

require './t/test.pl';

if ( $Config{usecrosscompile} ) {
  skip_all( "Not all files are available during cross-compilation" );
}

plan('no_plan');

# --make-exceptions-list outputs the list of strings that don't have
# perldiag.pod entries to STDERR without TAP formatting, so they can
# easily be put in the __DATA__ section of this file.  This was done
# initially so as to not create new test failures upon the initial
# creation of this test file.  You probably shouldn't do it again.
# Just add the documentation instead.
my $make_exceptions_list = ($ARGV[0]||'') eq '--make-exceptions-list'
  and shift;

require './regen/embed_lib.pl';

# Look for functions that look like they could be diagnostic ones.
my @functions;
foreach (@{(setup_embed())[0]}) {
  next if @$_ < 2;
  next unless $_->[2]  =~ /warn|(?<!ov)err|(\b|_)die|croak/i;
  # The flag p means that this function may have a 'Perl_' prefix
  # The flag S means that this function may have a 'S_' prefix
  push @functions, $_->[2];
  push @functions, 'Perl_' . $_->[2] if $_->[0] =~ /p/;
  push @functions, 'S_' . $_->[2] if $_->[0] =~ /S/;
};
push @functions, 'Perl_mess';

my $regcomp_fail_re = '\b(?:(?:Simple_)?v)?FAIL[2-4]?(?:utf8f)?\b';
my $regcomp_re =
   "(?<routine>ckWARN(?:\\d+)?reg\\w*|vWARN\\d+|$regcomp_fail_re)";
my $function_re = join '|', @functions;
my $source_msg_re =
   "(?<routine>\\bDIE\\b|$function_re)";
my $text_re = '"(?<text>(?:\\\\"|[^"]|"\s*[A-Z_]+\s*")*)"';
my $source_msg_call_re = qr/$source_msg_re(?:_nocontext)? \s*
    \( (?: \s* Perl_form \( )? (?:aTHX_)? \s*
    (?:packWARN\d*\((?<category>.*?)\),)? \s*
    $text_re /x;
my $bad_version_re = qr{BADVERSION\([^"]*$text_re};
   $regcomp_fail_re = qr/$regcomp_fail_re\([^"]*$text_re/;
my $regcomp_call_re = qr/$regcomp_re.*?$text_re/;

my %entries;

# Get the ignores that are compiled into this file
my $reading_categorical_exceptions;
while (<DATA>) {
  chomp;
  $entries{$_}{todo} = 1;
  $reading_categorical_exceptions and $entries{$_}{cattodo}=1;
  /__CATEGORIES__/ and ++$reading_categorical_exceptions;
}

my $pod = "pod/perldiag.pod";
my $cur_entry;
open my $diagfh, "<", $pod
  or die "Can't open $pod: $!";

my $category_re = qr/ [a-z0-9_:]+?/;    # Note: requires an initial space
my $severity_re = qr/ . (?: \| . )* /x; # A severity is a single char, but can
                                        # be of the form 'S|P|W'
my @same_descr;
my $depth = 0;
while (<$diagfh>) {
  if (m/^=over/) {
    $depth++;
    next;
  }
  if (m/^=back/) {
    $depth--;
    next;
  }

  # Stuff deeper than main level is ignored
  next if $depth != 1;

  if (m/^=item (.*)/) {
    $cur_entry = $1;

    # Allow multi-line headers
    while (<$diagfh>) {
      if (/^\s*$/) {
        last;
      }

      $cur_entry =~ s/ ?\z/ $_/;
    }

    $cur_entry =~ s/\n/ /gs; # Fix multi-line headers if they have \n's
    $cur_entry =~ s/\s+\z//;
    $cur_entry =~ s/E<lt>/</g;
    $cur_entry =~ s/E<gt>/>/g;
    $cur_entry =~ s,E<sol>,/,g;
    $cur_entry =~ s/[BCIFS](?:<<< (.*?) >>>|<< (.*?) >>|<(.*?)>)/$+/g;

    if (exists $entries{$cur_entry} &&  $entries{$cur_entry}{todo}
                                    && !$entries{$cur_entry}{cattodo}) {
        TODO: {
            local $::TODO = "Remove the TODO entry \"$cur_entry\" from DATA as it is already in $pod near line $.";
            ok($cur_entry);
        }
    }
    # Make sure to init this here, so an actual entry in perldiag
    # overwrites one in DATA.
    $entries{$cur_entry}{todo} = 0;
    $entries{$cur_entry}{line_number} = $.;
  }

  next if ! defined $cur_entry;

  if (! $entries{$cur_entry}{severity}) {
    if (/^ \( ( $severity_re )

        # Can have multiple categories separated by commas
        ( $category_re (?: , $category_re)* )? \) /x)
    {
      $entries{$cur_entry}{severity} = $1;
      $entries{$cur_entry}{category} =
        $2 && join ", ", sort split " ", $2 =~ y/,//dr;

      # Record it also for other messages sharing the same description
      @$_{qw<severity category>} =
        @{$entries{$cur_entry}}{qw<severity category>}
       for @same_descr;
    }
    elsif (! $entries{$cur_entry}{first_line} && $_ =~ /\S/) {

      # Keep track of first line of text if doesn't contain a severity, so
      # that can later examine it to determine if that is ok or not
      $entries{$cur_entry}{first_line} = $_;
    }
    if (/\S/) {
      @same_descr = ();
    }
    else {
      push @same_descr, $entries{$cur_entry};
    }
  }
}

if ($depth != 0) {
    diag ("Unbalance =over/=back.  Fix before proceeding; over - back = " . $depth);
    exit(1);
}

foreach my $cur_entry ( keys %entries) {
    next if $entries{$cur_entry}{todo}; # If in this file, won't have a severity
    if (! exists $entries{$cur_entry}{severity}

            # If there is no first line, it was two =items in a row, so the
            # second one is the one with text, not this one.
        && exists $entries{$cur_entry}{first_line}

            # If the first line refers to another message, no need for severity
        && $entries{$cur_entry}{first_line} !~ /^See/)
    {
        fail($cur_entry);
        diag(
            "   $pod entry at line $entries{$cur_entry}{line_number}\n"
          . "       \"$cur_entry\"\n"
          . "   is missing a severity and/or category"
        );
    }
}

# List from perlguts.pod "Formatted Printing of IVs, UVs, and NVs"
# Convert from internal formats to ones that the readers will be familiar
# with, while removing any format modifiers, such as precision, the
# presence of which would just confuse the pod's explanation
my %specialformats = (IVdf => 'd',
		      UVuf => 'd',
		      UVof => 'o',
		      UVxf => 'x',
		      UVXf => 'X',
		      NVef => 'f',
		      NVff => 'f',
		      NVgf => 'f',
		      HEKf256=>'s',
		      HEKf => 's',
		      UTF8f=> 's',
		      SVf256=>'s',
		      SVf32=> 's',
		      SVf  => 's',
		      PNf  => 's');
my $format_modifiers = qr/ [#0\ +-]*              # optional flags
			  (?: [1-9][0-9]* | \* )? # optional field width
			  (?: \. \d* )?           # optional precision
			  (?: h|l )?              # optional length modifier
			/x;

my $specialformats =
 join '|', sort { length $b cmp length $a } keys %specialformats;
my $specialformats_re = qr/%$format_modifiers"\s*($specialformats)(\s*")?/;

if (@ARGV) {
  check_file($_) for @ARGV;
  exit;
}
open my $fh, '<', 'MANIFEST' or die "Can't open MANIFEST: $!";
while (my $file = <$fh>) {
    chomp $file;
    $file =~ s/\s+.*//;
    next unless $file =~ /\.(?:c|cpp|h|xs|y)\z/ or $file =~ /^perly\./;
    # OS/2 extensions have never been migrated to ext/, hence the special case:
    next if $file =~ m!\A(?:ext|dist|cpan|lib|t|os2/OS2)/!
            && $file !~ m!\Aext/DynaLoader/!;
    check_file($file);
}
close $fh or die $!;

# Standardize messages with variants into the form that appears
# in perldiag.pod -- useful for things without a diag_listed_as annotation
sub standardize {
  my ($name) = @_;

  if    ( $name =~ m/^(Invalid strict version format) \([^\)]*\)/ ) {
    $name = "$1 (\%s)";
  }
  elsif ( $name =~ m/^(Invalid version format) \([^\)]*\)/ ) {
    $name = "$1 (\%s)";
  }
  elsif ($name =~ m/^panic: /) {
    $name = "panic: \%s";
  }

  return $name;
}

sub check_file {
  my ($codefn) = @_;

  print "# Checking $codefn\n";

  open my $codefh, "<", $codefn
    or die "Can't open $codefn: $!";

  my $listed_as;
  my $listed_as_line;
  my $sub = 'top of file';
  while (<$codefh>) {
    chomp;
    # Getting too much here isn't a problem; we only use this to skip
    # errors inside of XS modules, which should get documented in the
    # docs for the module.
    if (m<^[^#\s]> and $_ !~ m/^[{}]*$/) {
      $sub = $_;
    }
    next if $sub =~ m/^XS/;
    if (m</\*\s*diag_listed_as: (.*?)\s*\*/>) {
      $listed_as = $1;
      $listed_as_line = $.+1;
    }
    elsif (m</\*\s*diag_listed_as: (.*?)\s*\z>) {
      $listed_as = $1;
      my $finished;
      while (<$codefh>) {
        if (m<\*/>) {
          $listed_as .= $` =~ s/^\s*/ /r =~ s/\s+\z//r;
          $listed_as_line = $.+1;
          $finished = 1;
          last;
        }
        else {
          $listed_as .= s/^\s*/ /r =~ s/\s+\z//r;
        }
      }
      if (!$finished) { $listed_as = undef }
    }
    next if /^#/;

    my $multiline = 0;
    # Loop to accumulate the message text all on one line.
    if (m/(?!^)\b(?:$source_msg_re(?:_nocontext)?|$regcomp_re)\s*\(/) {
      while (not m/\);\s*$/) {
        my $nextline = <$codefh>;
        # Means we fell off the end of the file.  Not terribly surprising;
        # this code tries to merge a lot of things that aren't regular C
        # code (preprocessor stuff, long comments).  That's OK; we don't
        # need those anyway.
        last if not defined $nextline;
        chomp $nextline;
        $nextline =~ s/^\s+//;
        $_ =~ s/\\$//;
        # Note that we only want to do this where *both* are true.
        if ($_ =~ m/"\s*$/ and $nextline =~ m/^"/) {
          $_ =~ s/"\s*$//;
          $nextline =~ s/^"//;
        }
        $_ .= $nextline;
        ++$multiline;
      }
    }
    # This should happen *after* unwrapping, or we don't reformat the things
    # in later lines.

    s/$specialformats_re/"%$specialformats{$1}" .  (defined $2 ? '' : '"')/ge;

    # Remove any remaining format modifiers, but not in %%
    s/ (?<!%) % $format_modifiers ( [dioxXucsfeEgGp] ) /%$1/xg;

    # The %"foo" thing needs to happen *before* this regex.
    # diag($_);
    # DIE is just return Perl_die
    my ($name, $category, $routine);
    if (/\b$source_msg_call_re/) {
      ($name, $category, $routine) = ($+{'text'}, $+{'category'}, $+{'routine'});
      # Sometimes the regexp will pick up too much for the category
      # e.g., WARN_UNINITIALIZED), PL_warn_uninit_sv ... up to the next )
      $category && $category =~ s/\).*//s;
      # Special-case yywarn
      /yywarn/ and $category = 'syntax';
      if (/win32_croak_not_implemented\(/) {
        $name .= " not implemented!"
      }
    }
    elsif (/$bad_version_re/) {
      ($name, $category) = ($+{'text'}, undef);
    }
    elsif (/$regcomp_fail_re/) {
      #  FAIL("foo") -> "foo in regex m/%s/"
      # vFAIL("foo") -> "foo in regex; marked by <-- HERE in m/%s/"
      ($name, $category) = ($+{'text'}, undef);
      $name .=
        " in regex" . ("; marked by <-- HERE in" x /vFAIL/) . " m/%s/";
    }
    elsif (/$regcomp_call_re/) {
      # vWARN/ckWARNreg("foo") -> "foo in regex; marked by <-- HERE in m/%s/
      ($name, $category, $routine) = ($+{'text'}, undef, $+{'routine'});
      $name .= " in regex; marked by <-- HERE in m/%s/";
      $category = 'WARN_REGEXP';
      if ($routine =~ /dep/) {
        $category .= ',WARN_DEPRECATED';
      }
    }
    else {
      next;
    }

    # Try to guess what the severity should be.  In the case of
    # Perl_ck_warner and other _ck_ functions, we can tell whether it is
    # a severe/default warning or no by the _d suffix.  In the case of
    # other warn functions we cannot tell, because Perl_warner may be pre-
    # ceded by if(ckWARN) or if(ckWARN_d).
    my $severity = !$routine                   ? '[PFX]'
                 :  $routine =~ /warn.*_d\z/   ? '[DS]'
                 :  $routine =~ /ck_warn/      ?  'W'
                 :  $routine =~ /warner/       ? '[WDS]'
                 :  $routine =~ /warn/         ?  'S'
                 :  $routine =~ /ckWARN.*dep/  ?  'D'
                 :  $routine =~ /ckWARN\d*reg_d/? 'S'
                 :  $routine =~ /ckWARN\d*reg/ ?  'W'
                 :  $routine =~ /vWARN\d/      ? '[WDS]'
                 :                             '[PFX]';
    my $categories;
    if (defined $category) {
      $category =~ s/__/::/g;
      $categories =
        join ", ",
              sort map {s/^WARN_//; lc $_} split /\s*[|,]\s*/, $category;
    }
    if ($listed_as and $listed_as_line == $. - $multiline) {
      $name = $listed_as;
    } else {
      # The form listed in perldiag ignores most sorts of fancy printf
      # formatting, or makes it more perlish.
      $name =~ s/%%/%/g;
      $name =~ s/%l[ud]/%d/g;
      $name =~ s/%\.(\d+|\*)s/\%s/g;
      $name =~ s/(?:%s){2,}/%s/g;
      $name =~ s/(\\")|("\s*[A-Z_]+\s*")/$1 ? '"' : '%s'/egg;
      $name =~ s/\\t/\t/g;
      $name =~ s/\\n/\n/g;
      $name =~ s/\s+$//;
      $name =~ s/(\\)\\/$1/g;
    }

    # Extra explanatory info on an already-listed error, doesn't
    # need it's own listing.
    next if $name =~ m/^\t/;

    # Happens fairly often with PL_no_modify.
    next if $name eq '%s';

    # Special syntax for magic comment, allows ignoring the fact
    # that it isn't listed.  Only use in very special circumstances,
    # like this script failing to notice that the Perl_croak call is
    # inside an #if 0 block.
    next if $name eq 'SKIPME';

    next if $name=~/\[TESTING\]/; # ignore these as they are works in progress

    check_message(standardize($name),$codefn,$severity,$categories);
  }
}

sub check_message {
    my($name,$codefn,$severity,$categories,$partial) = @_;
    my $key = $name =~ y/\n/ /r;
    my $ret;

    # Try to reduce printf() formats to simplest forms
    # Really this should be matching %s, etc like diagnostics.pm does

    # Kill flags
    $key =~ s/%[#0\-+]/%/g;

    # Kill width
    $key =~ s/\%(\d+|\*)/%/g;

    # Kill precision
    $key =~ s/\%\.(\d+|\*)/%/g;

    if (exists $entries{$key} and
          # todo + cattodo means it is not found and it is not in the
          # regular todo list, either
          !$entries{$key}{todo} || !$entries{$key}{cattodo}) {
      $ret = 1;
      if ( $entries{$key}{seen}++ ) {
        # no need to repeat entries we've tested
      } elsif ($entries{$key}{todo}) {
        TODO: {
          no warnings 'once';
          local $::TODO = 'in DATA';
          # There is no listing, but it is in the list of exceptions.  TODO FAIL.
          fail($key);
          diag(
            "    Message '$name'\n    from $codefn line $. is not listed in $pod\n".
            "    (but it wasn't documented in 5.10 either, so marking it TODO)."
          );
        }
      } else {
        # We found an actual valid entry in perldiag.pod for this error.
        pass($key);

        return $ret
          if $entries{$key}{cattodo};

        # Now check the category and severity

        # Cache our severity qr thingies
        use feature 'state';
        state %qrs;
        my $qr = $qrs{$severity} ||= qr/$severity/;

        like($entries{$key}{severity}, $qr,
          $severity =~ /\[/
            ? "severity is one of $severity for $key"
            : "severity is $severity for $key");

        is($entries{$key}{category}, $categories,
           ($categories ? "categories are [$categories]" : "no category")
             . " for $key");
      }
    } elsif ($partial) {
      # noop
    } else {
      my $ok;
      if ($name =~ /\n/) {
        $ok = 1;
        check_message($_,$codefn,$severity,$categories,1) or $ok = 0, last
          for split /\n/, $name;
      }
      if ($ok) {
        # noop
      } elsif ($make_exceptions_list) {
        # We're making an updated version of the exception list, to
        # stick in the __DATA__ section.  I honestly can't think of
        # a situation where this is the right thing to do, but I'm
        # leaving it here, just in case one of my descendents thinks
        # it's a good idea.
        print STDERR "$key\n";
      } else {
        # No listing found, and no excuse either.
        # Find the correct place in perldiag.pod, and add a stanza beginning =item $name.
        fail($name);
        diag("    Message '$name'\n    from $codefn line $. is not listed in $pod");
      }
      # seen it, so only fail once for this message
      $entries{$name}{seen}++;
    }

    die if $name =~ /%$/;
    return $ret;
}

# Lists all missing things as of the inauguration of this script, so we
# don't have to go from "meh" to perfect all at once.
# 
# PLEASE DO NOT ADD TO THIS LIST.  Instead, write an entry in
# pod/perldiag.pod for your new (warning|error).  Nevertheless,
# listing exceptions here when this script is not smart enough
# to recognize the messages is not so bad, as long as there are
# entries in perldiag.

# Entries after __CATEGORIES__ are those that are in perldiag but fail the
# severity/category test.

# Also FIXME this test, as the first entry in TODO *is* covered by the
# description: Malformed UTF-8 character (%s)
__DATA__
Malformed UTF-8 character (unexpected non-continuation byte 0x%x, immediately after start byte 0x%x)

Cannot apply "%s" in non-PerlIO perl
Cannot set timer
Can't find DLL name for the module `%s' by the handle %d, rc=%u=%x
Can't find string terminator %c%s%c anywhere before EOF
Can't fix broken locale name "%s"
Can't get short module name from a handle
Can't load DLL `%s', possible problematic module `%s'
Can't locate %s:   %s
Can't pipe "%s": %s
Can't set type on DOS
Can't spawn: %s
Can't spawn "%s": %s
Can't %s script `%s' with ARGV[0] being `%s'
Can't %s "%s": %s
Can't %s `%s' with ARGV[0] being `%s' (looking for executables only, not found)
Can't use string ("%s"%s) as a subroutine ref while "strict refs" in use
Character(s) in '%c' format wrapped in %s
chown not implemented!
clear %s
Code missing after '/' in pack
Code missing after '/' in unpack
Could not find version 1.1 of winsock dll
Could not find version 2.0 of winsock dll
'%c' outside of string in pack
Debug leaking scalars child failed%s with errno %d: %s
detach of a thread which could not start
detach on an already detached thread
detach on a thread with a waiter
'/' does not take a repeat count in %s
-Dp not implemented on this platform
Empty array reference given to mod2fname
endhostent not implemented!
endnetent not implemented!
endprotoent not implemented!
endservent not implemented!
Error loading module '%s': %s
Error reading "%s": %s
execl not implemented!
EVAL without pos change exceeded limit in regex
Filehandle opened only for %sput
Filehandle %s opened only for %sput
Filehandle STD%s reopened as %s only for input
file_type not implemented on DOS
filter_del can only delete in reverse order (currently)
fork() not available
fork() not implemented!
YOU HAVEN'T DISABLED SET-ID SCRIPTS IN THE KERNEL YET! FIX YOUR KERNEL, PUT A C WRAPPER AROUND THIS SCRIPT, OR USE -u AND UNDUMP!
free %s
Free to wrong pool %p not %p
Function "endnetent" not implemented in this version of perl.
Function "endprotoent" not implemented in this version of perl.
Function "endservent" not implemented in this version of perl.
Function "getnetbyaddr" not implemented in this version of perl.
Function "getnetbyname" not implemented in this version of perl.
Function "getnetent" not implemented in this version of perl.
Function "getprotobyname" not implemented in this version of perl.
Function "getprotobynumber" not implemented in this version of perl.
Function "getprotoent" not implemented in this version of perl.
Function "getservbyport" not implemented in this version of perl.
Function "getservent" not implemented in this version of perl.
Function "getsockopt" not implemented in this version of perl.
Function "recvmsg" not implemented in this version of perl.
Function "sendmsg" not implemented in this version of perl.
Function "sethostent" not implemented in this version of perl.
Function "setnetent" not implemented in this version of perl.
Function "setprotoent" not implemented in this version of perl.
Function "setservent"  not implemented in this version of perl.
Function "setsockopt" not implemented in this version of perl.
Function "tcdrain" not implemented in this version of perl.
Function "tcflow" not implemented in this version of perl.
Function "tcflush" not implemented in this version of perl.
Function "tcsendbreak" not implemented in this version of perl.
get %s %p %p %p
gethostent not implemented!
getnetbyaddr not implemented!
getnetbyname not implemented!
getnetent not implemented!
getprotoent not implemented!
getpwnam returned invalid UIC %o for user "%s"
getservent not implemented!
glob failed (can't start child: %s)
glob failed (child exited with status %d%s)
Got an error from DosAllocMem: %i
Goto undefined subroutine
Goto undefined subroutine &%s
Got signal %d
()-group starts with a count in %s
Illegal binary digit '%c' ignored
Illegal character %sin prototype for %s : %s
Illegal hexadecimal digit '%c' ignored
Illegal octal digit '%c' ignored
INSTALL_PREFIX too long: `%s'
Invalid argument to sv_cat_decode
Invalid range "%c-%c" in transliteration operator
Invalid separator character %c%c%c in PerlIO layer specification %s
Invalid TOKEN object ignored
Invalid type '%c' in pack
Invalid type '%c' in %s
Invalid type '%c' in unpack
Invalid type ',' in %s
ioctl implemented only on sockets
ioctlsocket not implemented!
join with a thread with a waiter
killpg not implemented!
List form of pipe open not implemented
Looks like we have no PM; will not load DLL %s without $ENV{PERL_ASIF_PM}
Malformed integer in [] in %s
Malformed %s
Malformed UTF-8 character (fatal)
Missing (suid) fd script name
More than one argument to open
More than one argument to open(,':%s')
No message queue
No %s allowed while running setgid
No %s allowed with (suid) fdscript
Not an XSUB reference
Not a reference given to mod2fname
Not array reference given to mod2fname
Operator or semicolon missing before %c%s
Out of memory during list extend
panic queryaddr
Parse error
PerlApp::TextQuery: no arguments, please
POSIX syntax [%c %c] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
ptr wrong %p != %p fl=%x nl=%p e=%p for %d
QUITing...
Recompile perl with -DDEBUGGING to use -D switch (did you mean -d ?)
recursion detected in %s
Regexp *+ operand could be empty in regex; marked by <-- HERE in m/%s/
Reversed %c= operator
%s: Can't parse EXE/DLL name: '%s'
%s(%f) failed
%sCompilation failed in require
%s: Error stripping dirs from EXE/DLL/INSTALLDIR name
sethostent not implemented!
setnetent not implemented!
setprotoent not implemented!
set %s %p %p %p
setservent not implemented!
%s free() ignored (RMAGIC, PERL_CORE)
%s has too many errors.
SIG%s handler "%s" not defined.
%s in %s
Size magic not implemented
%s: name `%s' too long
%s not implemented!
%s number > %s non-portable
%srealloc() %signored
%s in regex m/%s/
%s on %s %s
socketpair not implemented!
%s: %s
Starting Full Screen process with flag=%d, mytype=%d
Starting PM process with flag=%d, mytype=%d
sv_2iv assumed (U_V(fabs((double)SvNVX(sv))) < (UV)IV_MAX) but SvNVX(sv)=%f U_V is 0x%x, IV_MAX is 0x%x
switching effective gid is not implemented
switching effective uid is not implemented
System V IPC is not implemented on this machine
Terminating on signal SIG%s(%d)
The crypt() function is not implemented on NetWare
The flock() function is not implemented on NetWare
The rewinddir() function is not implemented on NetWare
The seekdir() function is not implemented on NetWare
The telldir() function is not implemented on NetWare
This perl was compiled without taint support. Cowardly refusing to run with -t or -T flags
This version of OS/2 does not support %s.%s
Too deeply nested ()-groups in %s
Too many args on %s line of "%s"
U0 mode on a byte string
unable to find VMSPIPE.COM for i/o piping
Unable to locate winsock library!
Unexpected program mode %d when morphing back from PM
Unrecognized character %s; marked by <-- HERE after %s<-- HERE near column %d
Unstable directory path, current directory changed unexpectedly
Unterminated compressed integer in unpack
Usage: %s(%s)
Usage: %s::%s(%s)
Usage: CODE(0x%x)(%s)
Usage: File::Copy::rmscopy(from,to[,date_flag])
Usage: VMS::Filespec::candelete(spec)
Usage: VMS::Filespec::fileify(spec)
Usage: VMS::Filespec::pathify(spec)
Usage: VMS::Filespec::rmsexpand(spec[,defspec])
Usage: VMS::Filespec::unixify(spec)
Usage: VMS::Filespec::unixpath(spec)
Usage: VMS::Filespec::unixrealpath(spec)
Usage: VMS::Filespec::vmsify(spec)
Usage: VMS::Filespec::vmspath(spec)
Usage: VMS::Filespec::vmsrealpath(spec)
utf8 "\x%X" does not map to Unicode
Value of logical "%s" too long. Truncating to %i bytes
waitpid: process %x is not a child of process %x
Wide character
Wide character in $/
win32_get_osfhandle() TBD on this platform
win32_open_osfhandle() TBD on this platform
Within []-length '*' not allowed in %s
Within []-length '%c' not allowed in %s
Wrong size of loadOrdinals array: expected %d, actual %d
Wrong syntax (suid) fd script name "%s"
'X' outside of string in %s
'X' outside of string in unpack

__CATEGORIES__

# This is a warning, but is currently followed immediately by a croak (toke.c)
Illegal character \%o (carriage return)

# Because uses WARN_MISSING as a synonym for WARN_UNINITIALIZED (sv.c)
Missing argument in %s

# This message can be both fatal and non-
False [] range "%s" in regex; marked by <-- HERE in m/%s/