diff options
Diffstat (limited to 'glib-patches/acinclude.kill.kill.kill.diff')
| -rw-r--r-- | glib-patches/acinclude.kill.kill.kill.diff | 434 |
1 files changed, 0 insertions, 434 deletions
diff --git a/glib-patches/acinclude.kill.kill.kill.diff b/glib-patches/acinclude.kill.kill.kill.diff deleted file mode 100644 index cf4a371..0000000 --- a/glib-patches/acinclude.kill.kill.kill.diff +++ /dev/null @@ -1,434 +0,0 @@ -diff -Nru glib-1.2.8/acinclude.m4 glib-1.2.8-pkgconfig/acinclude.m4 ---- glib-1.2.8/acinclude.m4 2000-02-04 19:30:01.000000000 +0100 -+++ glib-1.2.8-pkgconfig/acinclude.m4 1970-01-01 01:00:00.000000000 +0100 -@@ -1,430 +0,0 @@ --## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- --## Copyright (C) 1996-1999 Free Software Foundation, Inc. --## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 --## --## This program is free software; you can redistribute it and/or modify --## it under the terms of the GNU General Public License as published by --## the Free Software Foundation; either version 2 of the License, or --## (at your option) any later version. --## --## This program is distributed in the hope that it will be useful, but --## WITHOUT ANY WARRANTY; without even the implied warranty of --## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU --## General Public License for more details. --## --## You should have received a copy of the GNU General Public License --## along with this program; if not, write to the Free Software --## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. --## --## As a special exception to the GNU General Public License, if you --## distribute this file as part of a program that contains a --## configuration script generated by Autoconf, you may include it under --## the same distribution terms that you use for the rest of that program. -- --# serial 40 AC_PROG_LIBTOOL --AC_DEFUN(AC_PROG_LIBTOOL, --[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -- --# Save cache, so that ltconfig can load it --AC_CACHE_SAVE -- --# Actually configure libtool. ac_aux_dir is where install-sh is found. --CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ --LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ --LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ --DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ --${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ --$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ --|| AC_MSG_ERROR([libtool configure failed]) -- --# Reload cache, that may have been modified by ltconfig --AC_CACHE_LOAD -- --# This can be used to rebuild libtool when needed --LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" -- --# Always use our own libtool. --LIBTOOL='$(SHELL) $(top_builddir)/libtool' --AC_SUBST(LIBTOOL)dnl -- --# Redirect the config.log output again, so that the ltconfig log is not --# clobbered by the next message. --exec 5>>./config.log --]) -- --AC_DEFUN(AC_LIBTOOL_SETUP, --[AC_PREREQ(2.13)dnl --AC_REQUIRE([AC_ENABLE_SHARED])dnl --AC_REQUIRE([AC_ENABLE_STATIC])dnl --AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl --AC_REQUIRE([AC_CANONICAL_HOST])dnl --AC_REQUIRE([AC_CANONICAL_BUILD])dnl --AC_REQUIRE([AC_PROG_RANLIB])dnl --AC_REQUIRE([AC_PROG_CC])dnl --AC_REQUIRE([AC_PROG_LD])dnl --AC_REQUIRE([AC_PROG_NM])dnl --AC_REQUIRE([AC_PROG_LN_S])dnl --dnl -- --case "$target" in --NONE) lt_target="$host" ;; --*) lt_target="$target" ;; --esac -- --# Check for any special flags to pass to ltconfig. --libtool_flags="--cache-file=$cache_file" --test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" --test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" --test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" --test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" --test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" --ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], --[libtool_flags="$libtool_flags --enable-dlopen"]) --ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], --[libtool_flags="$libtool_flags --enable-win32-dll"]) --AC_ARG_ENABLE(libtool-lock, -- [ --disable-libtool-lock avoid locking (might break parallel builds)]) --test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" --test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" -- --# Some flags need to be propagated to the compiler or linker for good --# libtool support. --case "$lt_target" in --*-*-irix6*) -- # Find out which ABI we are using. -- echo '[#]line __oline__ "configure"' > conftest.$ac_ext -- if AC_TRY_EVAL(ac_compile); then -- case "`/usr/bin/file conftest.o`" in -- *32-bit*) -- LD="${LD-ld} -32" -- ;; -- *N32*) -- LD="${LD-ld} -n32" -- ;; -- *64-bit*) -- LD="${LD-ld} -64" -- ;; -- esac -- fi -- rm -rf conftest* -- ;; -- --*-*-sco3.2v5*) -- # On SCO OpenServer 5, we need -belf to get full-featured binaries. -- SAVE_CFLAGS="$CFLAGS" -- CFLAGS="$CFLAGS -belf" -- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, -- [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) -- if test x"$lt_cv_cc_needs_belf" != x"yes"; then -- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf -- CFLAGS="$SAVE_CFLAGS" -- fi -- ;; -- --ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], --[*-*-cygwin* | *-*-mingw*) -- AC_CHECK_TOOL(DLLTOOL, dlltool, false) -- AC_CHECK_TOOL(AS, as, false) -- AC_CHECK_TOOL(OBJDUMP, objdump, false) -- ;; --]) --esac --]) -- --# AC_LIBTOOL_DLOPEN - enable checks for dlopen support --AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) -- --# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's --AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) -- --# AC_ENABLE_SHARED - implement the --enable-shared flag --# Usage: AC_ENABLE_SHARED[(DEFAULT)] --# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to --# `yes'. --AC_DEFUN(AC_ENABLE_SHARED, [dnl --define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE(shared, --changequote(<<, >>)dnl --<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], --changequote([, ])dnl --[p=${PACKAGE-default} --case "$enableval" in --yes) enable_shared=yes ;; --no) enable_shared=no ;; --*) -- enable_shared=no -- # Look at the argument we got. We use all the common list separators. -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," -- for pkg in $enableval; do -- if test "X$pkg" = "X$p"; then -- enable_shared=yes -- fi -- done -- IFS="$ac_save_ifs" -- ;; --esac], --enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl --]) -- --# AC_DISABLE_SHARED - set the default shared flag to --disable-shared --AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_SHARED(no)]) -- --# AC_ENABLE_STATIC - implement the --enable-static flag --# Usage: AC_ENABLE_STATIC[(DEFAULT)] --# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to --# `yes'. --AC_DEFUN(AC_ENABLE_STATIC, [dnl --define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE(static, --changequote(<<, >>)dnl --<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], --changequote([, ])dnl --[p=${PACKAGE-default} --case "$enableval" in --yes) enable_static=yes ;; --no) enable_static=no ;; --*) -- enable_static=no -- # Look at the argument we got. We use all the common list separators. -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," -- for pkg in $enableval; do -- if test "X$pkg" = "X$p"; then -- enable_static=yes -- fi -- done -- IFS="$ac_save_ifs" -- ;; --esac], --enable_static=AC_ENABLE_STATIC_DEFAULT)dnl --]) -- --# AC_DISABLE_STATIC - set the default static flag to --disable-static --AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_STATIC(no)]) -- -- --# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag --# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] --# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to --# `yes'. --AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl --define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl --AC_ARG_ENABLE(fast-install, --changequote(<<, >>)dnl --<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], --changequote([, ])dnl --[p=${PACKAGE-default} --case "$enableval" in --yes) enable_fast_install=yes ;; --no) enable_fast_install=no ;; --*) -- enable_fast_install=no -- # Look at the argument we got. We use all the common list separators. -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," -- for pkg in $enableval; do -- if test "X$pkg" = "X$p"; then -- enable_fast_install=yes -- fi -- done -- IFS="$ac_save_ifs" -- ;; --esac], --enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl --]) -- --# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install --AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl --AC_ENABLE_FAST_INSTALL(no)]) -- --# AC_PROG_LD - find the path to the GNU or non-GNU linker --AC_DEFUN(AC_PROG_LD, --[AC_ARG_WITH(gnu-ld, --[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], --test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) --AC_REQUIRE([AC_PROG_CC])dnl --AC_REQUIRE([AC_CANONICAL_HOST])dnl --AC_REQUIRE([AC_CANONICAL_BUILD])dnl --ac_prog=ld --if test "$ac_cv_prog_gcc" = yes; then -- # Check if gcc -print-prog-name=ld gives a path. -- AC_MSG_CHECKING([for ld used by GCC]) -- ac_prog=`($CC -print-prog-name=ld) 2>&5` -- case "$ac_prog" in -- # Accept absolute paths. --changequote(,)dnl -- [\\/]* | [A-Za-z]:[\\/]*) -- re_direlt='/[^/][^/]*/\.\./' --changequote([,])dnl -- # Canonicalize the path of ld -- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` -- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do -- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` -- done -- test -z "$LD" && LD="$ac_prog" -- ;; -- "") -- # If it fails, then pretend we aren't using GCC. -- ac_prog=ld -- ;; -- *) -- # If it is relative, then search for the first ld in PATH. -- with_gnu_ld=unknown -- ;; -- esac --elif test "$with_gnu_ld" = yes; then -- AC_MSG_CHECKING([for GNU ld]) --else -- AC_MSG_CHECKING([for non-GNU ld]) --fi --AC_CACHE_VAL(ac_cv_path_LD, --[if test -z "$LD"; then -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" -- for ac_dir in $PATH; do -- test -z "$ac_dir" && ac_dir=. -- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then -- ac_cv_path_LD="$ac_dir/$ac_prog" -- # Check to see if the program is GNU ld. I'd rather use --version, -- # but apparently some GNU ld's only accept -v. -- # Break only if it was the GNU/non-GNU ld that we prefer. -- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then -- test "$with_gnu_ld" != no && break -- else -- test "$with_gnu_ld" != yes && break -- fi -- fi -- done -- IFS="$ac_save_ifs" --else -- ac_cv_path_LD="$LD" # Let the user override the test with a path. --fi]) --LD="$ac_cv_path_LD" --if test -n "$LD"; then -- AC_MSG_RESULT($LD) --else -- AC_MSG_RESULT(no) --fi --test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) --AC_PROG_LD_GNU --]) -- --AC_DEFUN(AC_PROG_LD_GNU, --[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, --[# I'd rather use --version here, but apparently some GNU ld's only accept -v. --if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then -- ac_cv_prog_gnu_ld=yes --else -- ac_cv_prog_gnu_ld=no --fi]) --]) -- --# AC_PROG_NM - find the path to a BSD-compatible name lister --AC_DEFUN(AC_PROG_NM, --[AC_MSG_CHECKING([for BSD-compatible nm]) --AC_CACHE_VAL(ac_cv_path_NM, --[if test -n "$NM"; then -- # Let the user override the test. -- ac_cv_path_NM="$NM" --else -- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" -- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do -- test -z "$ac_dir" && ac_dir=. -- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then -- # Check to see if the nm accepts a BSD-compat flag. -- # Adding the `sed 1q' prevents false positives on HP-UX, which says: -- # nm: unknown option "B" ignored -- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then -- ac_cv_path_NM="$ac_dir/nm -B" -- break -- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then -- ac_cv_path_NM="$ac_dir/nm -p" -- break -- else -- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but -- continue # so that we can try to find one that supports BSD flags -- fi -- fi -- done -- IFS="$ac_save_ifs" -- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm --fi]) --NM="$ac_cv_path_NM" --AC_MSG_RESULT([$NM]) --]) -- --# AC_CHECK_LIBM - check for math library --AC_DEFUN(AC_CHECK_LIBM, --[AC_REQUIRE([AC_CANONICAL_HOST])dnl --LIBM= --case "$lt_target" in --*-*-beos* | *-*-cygwin*) -- # These system don't have libm -- ;; --*-ncr-sysv4.3*) -- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") -- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") -- ;; --*) -- AC_CHECK_LIB(m, main, LIBM="-lm") -- ;; --esac --]) -- --# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for --# the libltdl convenience library, adds --enable-ltdl-convenience to --# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor --# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed --# to be `${top_builddir}/libltdl'. Make sure you start DIR with --# '${top_builddir}/' (note the single quotes!) if your package is not --# flat, and, if you're not using automake, define top_builddir as --# appropriate in the Makefiles. --AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -- case "$enable_ltdl_convenience" in -- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; -- "") enable_ltdl_convenience=yes -- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; -- esac -- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la -- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) --]) -- --# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for --# the libltdl installable library, and adds --enable-ltdl-install to --# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor --# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed --# to be `${top_builddir}/libltdl'. Make sure you start DIR with --# '${top_builddir}/' (note the single quotes!) if your package is not --# flat, and, if you're not using automake, define top_builddir as --# appropriate in the Makefiles. --# In the future, this macro may have to be called after AC_PROG_LIBTOOL. --AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -- AC_CHECK_LIB(ltdl, main, -- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], -- [if test x"$enable_ltdl_install" = xno; then -- AC_MSG_WARN([libltdl not installed, but installation disabled]) -- else -- enable_ltdl_install=yes -- fi -- ]) -- if test x"$enable_ltdl_install" = x"yes"; then -- ac_configure_args="$ac_configure_args --enable-ltdl-install" -- LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la -- INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) -- else -- ac_configure_args="$ac_configure_args --enable-ltdl-install=no" -- LIBLTDL="-lltdl" -- INCLTDL= -- fi --]) -- --dnl old names --AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl --AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl --AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl --AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl --AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl --AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl --AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl -- --dnl This is just to silence aclocal about the macro not being used --ifelse([AC_DISABLE_FAST_INSTALL])dnl |