This is a walkthrough of the NumPy 1.21.0 release on Linux, modified for building with GitHub Actions and cibuildwheels and uploading to the `anaconda.org staging repository for NumPy `_. The commands can be copied into the command line, but be sure to replace 1.21.0 by the correct version. This should be read together with the :ref:`general release guide `. Facility preparation ==================== Before beginning to make a release, use the ``*_requirements.txt`` files to ensure that you have the needed software. Most software can be installed with pip, but some will require apt-get, dnf, or whatever your system uses for software. You will also need a GitHub personal access token (PAT) to push the documentation. There are a few ways to streamline things: - Git can be set up to use a keyring to store your GitHub personal access token. Search online for the details. - You can use the ``keyring`` app to store the PyPI password for twine. See the online twine documentation for details. Release preparation =================== Add/drop Python versions ------------------------ When adding or dropping Python versions, three files need to be edited: - .github/workflows/wheels.yml # for github cibuildwheel - .travis.yml # for cibuildwheel aarch64 builds - setup.py # for classifier and minimum version check. Make these changes in an ordinary PR against main and backport if necessary. Using the `BLD:` prefix (build label) for the commit summary will cause the wheel builds to be run so that the changes will be tested, We currently release wheels for new Python versions after the first Python rc once manylinux and cibuildwheel support it. For Python 3.11 we were able to release within a week of the rc1 announcement. Backport Pull Requests ---------------------- Changes that have been marked for this release must be backported to the maintenance/1.21.x branch. Update release documentation ---------------------------- Four documents usually need to be updated or created before making a release: - The changelog - The release-notes - The ``.mailmap`` file - The ``doc/source/release.rst`` file These changes should be made as an ordinary PR against the maintenance branch. After release all files except ``doc/source/release.rst`` will need to be forward ported to the main branch. Generate the changelog ~~~~~~~~~~~~~~~~~~~~~~ The changelog is generated using the changelog tool:: $ python tools/changelog.py $GITHUB v1.20.0..maintenance/1.21.x > doc/changelog/1.21.0-changelog.rst where ``GITHUB`` contains your GitHub access token. The text will need to be checked for non-standard contributor names and dependabot entries removed. It is also a good idea to remove any links that may be present in the PR titles as they don't translate well to markdown, replace them with monospaced text. The non-standard contributor names should be fixed by updating the ``.mailmap`` file, which is a lot of work. It is best to make several trial runs before reaching this point and ping the malefactors using a GitHub issue to get the needed information. Finish the release notes ~~~~~~~~~~~~~~~~~~~~~~~~ If this is the first release in a series the release note is generated, see the release note in ``doc/release/upcoming_changes/README.rst`` to see how to do this. Generating the release notes will also delete all the news fragment files in ``doc/release/upcoming_changes/``. The generated release note will always need some fixups, the introduction will need to be written, and significant changes should be called out. For patch releases the changelog text may also be appended, but not for the initial release as it is too long. Check previous release notes to see how this is done. Note that the ``:orphan:`` markup at the top, if present, will need changing to ``.. currentmodule:: numpy`` and the ``doc/source/release.rst`` index file will need updating. Check the ``pavement.py`` file ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Check that the pavement.py file points to the correct release notes. It should have been updated after the last release, but if not, fix it now:: $ gvim pavement.py Release walkthrough =================== Note that in the code snippets below, ``upstream`` refers to the root repository on GitHub and ``origin`` to its fork in your personal GitHub repositories. You may need to make adjustments if you have not forked the repository but simply cloned it locally. You can also edit ``.git/config`` and add ``upstream`` if it isn't already present. 1. Prepare the release commit ----------------------------- Checkout the branch for the release, make sure it is up to date, and clean the repository:: $ git checkout maintenance/1.21.x $ git pull upstream maintenance/1.21.x $ git submodule update $ git clean -xdfq Sanity check:: $ python3 runtests.py -m "full" Tag the release and push the tag. This requires write permission for the numpy repository:: $ git tag -a -s v1.21.0 -m"NumPy 1.21.0 release" $ git push upstream v1.21.0 If you need to delete the tag due to error:: $ git tag -d v1.21.0 $ git push --delete upstream v1.21.0 2. Build wheels --------------- Build wheels via cibuildwheel (preferred) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tagging the build at the beginning of this process will trigger a wheel build via cibuildwheel and upload wheels and an sdist to the staging repo. The CI run on github actions (for all x86-based and macOS arm64 wheels) takes about 1 1/4 hours. The CI run on travis (for aarch64) takes less time. You can check for uploaded files at the `staging repository`_, but note that it is not closely synched with what you see of the running jobs. If you wish to manually trigger a wheel build, you can do so: - On github actions -> `Wheel builder`_ there is a "Run workflow" button, click on it and choose the tag to build - On travis_ there is a "More Options" button, click on it and choose a branch to build. There does not appear to be an option to build a tag. If a wheel build fails for unrelated reasons, you can rerun it individually: - On github actions select `Wheel builder`_ click on the commit that contains the build you want to rerun. On the left there is a list of wheel builds, select the one you want to rerun and on the resulting page hit the counterclockwise arrows button. - On travis_ select the failing build, which will take you to the travis job for that build. Hit the restart job button. Note that if you do need to rerun jobs, you will need to delete the uploaded file, if any, in the anaconda `staging repository`_, The old files will not be overwritten. .. _`staging repository`: https://anaconda.org/multibuild-wheels-staging/numpy/files .. _`Wheel builder`: https://github.com/numpy/numpy/actions/workflows/wheels.yml .. _travis : https://app.travis-ci.com/github/numpy/numpy 3. Download wheels ------------------ When the wheels have all been successfully built and staged, download them from the Anaconda staging directory using the ``tools/download-wheels.py`` script:: $ cd ../numpy $ mkdir -p release/installers $ python3 tools/download-wheels.py 1.21.0 4. Generate the README files ---------------------------- This needs to be done after all installers are downloaded, but before the pavement file is updated for continued development:: $ paver write_release 5. Reset the maintenance branch into a development state (skip for prereleases) ------------------------------------------------------------------------------- Create release notes for next release and edit them to set the version. These notes will be a skeleton and have little content:: $ cp doc/source/release/template.rst doc/source/release/1.21.1-notes.rst $ gvim doc/source/release/1.21.1-notes.rst $ git add doc/source/release/1.21.1-notes.rst Add new release notes to the documentation release list and update the ``RELEASE_NOTES`` variable in ``pavement.py``:: $ gvim doc/source/release.rst pavement.py Commit the result:: $ git commit -a -m"REL: prepare 1.21.x for further development" $ git push upstream HEAD 6. Upload to PyPI ----------------- Upload to PyPI using ``twine``. A recent version of ``twine`` of is needed after recent PyPI changes, version ``3.4.1`` was used here:: $ cd ../numpy $ twine upload release/installers/*.whl $ twine upload release/installers/numpy-1.21.0.tar.gz # Upload last. If one of the commands breaks in the middle, you may need to selectively upload the remaining files because PyPI does not allow the same file to be uploaded twice. The source file should be uploaded last to avoid synchronization problems that might occur if pip users access the files while this is in process, causing pip to build from source rather than downloading a binary wheel. PyPI only allows a single source distribution, here we have chosen the zip archive. 7. Upload files to github ------------------------- Go to ``_, there should be a ``v1.21.0 tag``, click on it and hit the edit button for that tag. There are two ways to add files, using an editable text window and as binary uploads. Start by editing the ``release/README.md`` that is translated from the rst version using pandoc. Things that will need fixing: PR lines from the changelog, if included, are wrapped and need unwrapping, links should be changed to monospaced text. Then copy the contents to the clipboard and paste them into the text window. It may take several tries to get it look right. Then - Upload ``release/installers/numpy-1.21.0.tar.gz`` as a binary file. - Upload ``release/README.rst`` as a binary file. - Upload ``doc/changelog/1.21.0-changelog.rst`` as a binary file. - Check the pre-release button if this is a pre-releases. - Hit the ``{Publish,Update} release`` button at the bottom. 8. Upload documents to numpy.org (skip for prereleases) ------------------------------------------------------- .. note:: You will need a GitHub personal access token to push the update. This step is only needed for final releases and can be skipped for pre-releases and most patch releases. ``make merge-doc`` clones the ``numpy/doc`` repo into ``doc/build/merge`` and updates it with the new documentation:: $ git clean -xdfq $ git co v1.21.0 $ pushd doc $ make docenv && source docenv/bin/activate $ make merge-doc $ pushd build/merge If the release series is a new one, you will need to add a new section to the ``doc/build/merge/index.html`` front page just after the "insert here" comment:: $ gvim index.html +/'insert here' Further, update the version-switcher json file to add the new release and update the version marked `(stable)`:: $ gvim _static/versions.json Otherwise, only the ``zip`` link should be updated with the new tag name. Since we are no longer generating ``pdf`` files, remove the line for the ``pdf`` files if present:: $ gvim index.html +/'tag v1.21' You can "test run" the new documentation in a browser to make sure the links work:: $ firefox index.html # or google-chrome, etc. Update the stable link and update:: $ ln -sfn 1.21 stable $ ls -l # check the link Once everything seems satisfactory, update, commit and upload the changes:: $ python3 update.py $ git commit -a -m"Add documentation for v1.21.0" $ git push $ deactivate $ popd $ popd 9. Announce the release on numpy.org (skip for prereleases) ----------------------------------------------------------- This assumes that you have forked ``_:: $ cd ../numpy.org $ git checkout main $ git pull upstream main $ git checkout -b announce-numpy-1.21.0 $ gvim content/en/news.md - For all releases, go to the bottom of the page and add a one line link. Look to the previous links for example. - For the ``*.0`` release in a cycle, add a new section at the top with a short description of the new features and point the news link to it. commit and push:: $ git commit -a -m"announce the NumPy 1.21.0 release" $ git push origin HEAD Go to your Github fork and make a pull request. 10. Announce to mailing lists ----------------------------- The release should be announced on the numpy-discussion, scipy-devel, scipy-user, and python-announce-list mailing lists. Look at previous announcements for the basic template. The contributor and PR lists are the same as generated for the release notes above. If you crosspost, make sure that python-announce-list is BCC so that replies will not be sent to that list. 11. Post-release tasks (skip for prereleases) --------------------------------------------- Checkout main and forward port the documentation changes:: $ git checkout -b post-1.21.0-release-update $ git checkout maintenance/1.21.x doc/source/release/1.21.0-notes.rst $ git checkout maintenance/1.21.x doc/changelog/1.21.0-changelog.rst $ git checkout maintenance/1.21.x .mailmap # only if updated for release. $ gvim doc/source/release.rst # Add link to new notes $ git status # check status before commit $ git commit -a -m"MAINT: Update main after 1.21.0 release." $ git push origin HEAD Go to GitHub and make a PR. 12. Update oldest-supported-numpy --------------------------------- If this release is the first one to support a new Python version, or the first to provide wheels for a new platform or PyPy version, the version pinnings in https://github.com/scipy/oldest-supported-numpy should be updated. Either submit a PR with changes to ``setup.cfg`` there, or open an issue with info on needed changes.