diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/examplefiles/termcap | 1340 | ||||
| -rw-r--r-- | tests/examplefiles/terminfo | 1445 |
2 files changed, 2785 insertions, 0 deletions
diff --git a/tests/examplefiles/termcap b/tests/examplefiles/termcap new file mode 100644 index 00000000..e20adaba --- /dev/null +++ b/tests/examplefiles/termcap @@ -0,0 +1,1340 @@ +######## This example from excerpt of <http://www.catb.org/esr/terminfo/>: +# +# Version 11.0.1 +# $Date: 2000/03/02 15:51:11 $ +# termcap syntax +# + +######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES +# +# This section describes terminal classes and brands that are still +# quite common. +# + +#### Specials +# +# Special "terminals". These are used to label tty lines when you don't +# know what kind of terminal is on it. The characteristics of an unknown +# terminal are the lowest common denominator - they look about like a ti 700. +# + +dumb|80-column dumb tty:\ + :am:\ + :co#80:\ + :bl=^G:cr=^M:do=^J:sf=^J: +unknown|unknown terminal type:\ + :gn:tc=dumb: +lpr|printer|line printer:\ + :bs:hc:os:\ + :co#132:li#66:\ + :bl=^G:cr=^M:do=^J:ff=^L:le=^H:sf=^J: +glasstty|classic glass tty interpreting ASCII control characters:\ + :am:bs:\ + :co#80:\ + :bl=^G:cl=^L:cr=^M:do=^J:kd=^J:kl=^H:le=^H:nw=^M^J:ta=^I: +vanilla:\ + :bs:\ + :bl=^G:cr=^M:do=^J:sf=^J: + +#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities +# +# See the end-of-file comment for more on these. +# + +# ANSI capabilities are broken up into pieces, so that a terminal +# implementing some ANSI subset can use many of them. +ansi+local1:\ + :do=\E[B:le=\E[D:nd=\E[C:up=\E[A: +ansi+local:\ + :DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:tc=ansi+local1: +ansi+tabs:\ + :bt=\E[Z:ct=\E[2g:st=\EH:ta=^I: +ansi+inittabs:\ + :it#8:tc=ansi+tabs: +ansi+erase:\ + :cd=\E[J:ce=\E[K:cl=\E[H\E[J: +ansi+rca:\ + :ch=\E[%+^AG:cv=\E[%+^Ad: +ansi+cup:\ + :cm=\E[%i%d;%dH:ho=\E[H: +ansi+rep:\ + :..rp=%p1%c\E[%p2%{1}%-%db: +ansi+idl1:\ + :al=\E[L:dl=\E[M: +ansi+idl:\ + :AL=\E[%dL:DL=\E[%dM:tc=ansi+idl1: +ansi+idc:\ + :IC=\E[%d@:dc=\E[P:ei=\E6:ic=\E[@:im=\E6: +ansi+arrows:\ + :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A: +ansi+sgr|ansi graphic renditions:\ + :mb=\E[5m:me=\E[0m:mk=\E[8m:mr=\E[7m: +ansi+sgrso|ansi standout only:\ + :se=\E[m:so=\E[7m: +ansi+sgrul|ansi underline only:\ + :ue=\E[m:us=\E[4m: +ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim:\ + :md=\E[1m:\ + :..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul: +ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold:\ + :mh=\E[2m:\ + :..sa=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m:tc=ansi+sgr:tc=ansi+sgrso:tc=ansi+sgrul: +ansi+pp|ansi printer port:\ + :pf=\E[4i:po=\E[5i:ps=\E[0i: +ansi+csr|ansi scroll-region plus cursor save & restore:\ + :cs=\E[%i%d;%dr:rc=\E8:sc=\E7: + +# The IBM PC alternate character set. Plug this into any Intel console entry. +# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the +# ROM graphics for control characters such as the diamond, up- and down-arrow. +# This works with the System V, Linux, and BSDI consoles. It's a safe bet this +# will work with any Intel console, they all seem to have inherited \E[11m +# from the ANSI.SYS de-facto standard. +klone+acs|alternate character set for ansi.sys displays:\ + :ac=+\020\054\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376:\ + :ae=\E[10m:as=\E[11m: + +# Highlight controls corresponding to the ANSI.SYS standard. Most +# console drivers for Intel boxes obey these. Makes the same assumption +# about \E[11m as klone+acs. True ANSI/ECMA-48 would have :se=\E[27m:, +# :ue=\E[24m:, but this isn't a documented feature of ANSI.SYS. +klone+sgr|attribute control for ansi.sys displays:\ + :S2=\E[11m:S3=\E[10m:mb=\E[5m:md=\E[1m:me=\E[0;10m:\ + :mk=\E[8m:mr=\E[7m:\ + :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:\ + :se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:\ + :tc=klone+acs: + +# Highlight controls corresponding to the ANSI.SYS standard. *All* +# console drivers for Intel boxes obey these. Does not assume \E[11m will +# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS +# diamond and arrow characters under curses. +klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m):\ + :as=\E[12m:mb=\E[5m:md=\E[1m:me=\E[0;10m:mk=\E[8m:\ + :mr=\E[7m:\ + :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m:\ + :se=\E[m:so=\E[7m:ue=\E[m:us=\E[4m:\ + :tc=klone+acs: + +# KOI8-R (RFC1489) acs (alternate character set) +# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. +klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset:\ + :ac=+\020\054\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225:\ + :ae=\E[10m:as=\E[11m: + +# ANSI.SYS color control. The setab/setaf caps depend on the coincidence +# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer +# but equivalent strings that don't rely on that coincidence: +# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. +# They match a subset of ECMA-48. +klone+color|color control for ansi.sys and ISO6429-compatible displays:\ + :Co#8:NC#3:pa#64:\ + :AB=\E[4%p1%dm:AF=\E[3%p1%dm:op=\E[37;40m: + +# This is better than klone+color, it doesn't assume white-on-black as the +# default color pair, but many `ANSI' terminals don't grok the <op> cap. +ecma+color|color control for ECMA-48-compatible terminals:\ + :Co#8:NC#3:pa#64:\ + :AB=\E[4%p1%dm:AF=\E[3%p1%dm:op=\E[39;49m: + +# Attribute control for ECMA-48-compatible terminals +ecma+sgr|attribute capabilities for true ECMA-48 terminals:\ + :se=\E[27m:ue=\E[24m:\ + :tc=klone+sgr: + +# For comparison, here are all the capabilities implied by the Intel +# Binary Compatibility Standard (level 2) that fit within terminfo. +# For more detail on this rather pathetic standard, see the comments +# near the end of this file. +ibcs2|Intel Binary Compatibility Standard prescriptions:\ + :AL=\E[%dL:DC=\E[%dP:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\ + :RA=\E[?7l:RI=\E[%dC:S1=\E=%p1%dg:SA=\E[?7h:SF=\E[%dS:\ + :SR=\E[%dT:UP=\E[%dA:bt=\E[Z:ch=\E[%i%dG:cl=\Ec:\ + :cm=\E[%i%d;%dH:ct=\E[g:cv=\E[%i%dd:ec=\E[%dX:ei=:im=:\ + :rc=\E7:sc=\E7:st=\EH: + +#### ANSI/ECMA-48 terminals and terminal emulators +# +# See near the end of this file for details on ANSI conformance. +# Don't mess with these entries! Lots of other entries depend on them! +# +# This section lists entries in a least-capable to most-capable order. +# if you're in doubt about what `ANSI' matches yours, try them in that +# order and back off from the first that breaks. + +# ansi-mr is for ANSI terminals with ONLY relative cursor addressing +# and more than one page of memory. It uses local motions instead of +# direct cursor addressing, and makes almost no assumptions. It does +# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. +ansi-mr|mem rel cup ansi:\ + :am:xo:\ + :co#80:li#24:tc=vanilla:tc=ansi+erase:tc=ansi+local1: + +# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but +# beware of screen size problems and memory relative cursor addressing. +ansi-mini|minimum ansi standard terminal:\ + :am:xo:\ + :co#80:li#24:tc=vanilla:tc=ansi+cup:tc=ansi+erase: + +# ansi-mtabs adds relative addressing and minimal tab support +ansi-mtabs|any ansi terminal with pessimistic assumptions:\ + :it#8:\ + :ta=^I:tc=ansi+local1:tc=ansi-mini: + +# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL +# +# The following is an entry for the full ANSI 3.64 (1977). It lacks +# padding, but most terminals using the standard are "fast" enough +# not to require any -- even at 9600 bps. If you encounter problems, +# try including the padding specifications. +# +# Note: the :as: and :ae: specifications are not implemented here, for +# the available termcap documentation does not make clear WHICH alternate +# character set to specify. ANSI 3.64 seems to make allowances for several. +# Please make the appropriate adjustments to fit your needs -- that is +# if you will be using alternate character sets. +# +# There are very few terminals running the full ANSI 3.64 standard, +# so I could only test this entry on one verified terminal (Visual 102). +# I would appreciate the results on other terminals sent to me. +# +# Please report comments, changes, and problems to: +# +# U.S. MAIL: Hugh Hansard +# Box: 22830 +# Emory University +# Atlanta, GA. 30322. +# +# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. +# +# (Added vt100 :rc:,:sc: to quiet a tic warning --esr) +ansi77|ansi 3.64 standard 1977 version:\ + :am:bs:mi:\ + :co#80:it#8:li#24:\ + :al=5*\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[;H\E[2J:\ + :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=5*\E[M:\ + :do=\E[B:ei=\E[4l:ho=\E[H:im=\E[4h:k1=\EOP:k2=\EOR:k4=\EOS:\ + :kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:\ + :nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:se=\E[m:sf=\ED:so=\E[7m:\ + :sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: + +# Procomm and some other ANSI emulations don't recognize all of the ANSI- +# standard capabilities. This entry deletes :UP:, :RI:, :DO:, :LE:, and +# <vpa>/<hpa> capabilities, forcing curses to use repetitions of :up:, +# :nd:, :do: and :le:. Also deleted :IC: and :ic:, as QModem up to +# 5.03 doesn't recognize these. Finally, we delete :rp: and :sr:, which seem +# to confuse many emulators. On the other hand, we can count on these programs +# doing :ae:/:as:/:sa:. Older versions of this entry featured +# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under +# ANSI.SYS influence. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 +pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode):\ + :am:bs:mi:ms:\ + :co#80:it#8:li#24:\ + :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ + :cm=\E[%i%d;%dH:cr=^M:ct=\E[2g:dc=\E[P:dl=\E[M:do=\E[B:\ + :ho=\E[H:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\ + :le=\E[D:nd=\E[C:sf=^J:st=\EH:ta=^I:up=\E[A:\ + :tc=klone+sgr-dumb: +pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode):\ + :li#25:tc=pcansi-m: +pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode):\ + :li#33:tc=pcansi-m: +pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode):\ + :li#43:tc=pcansi-m: +# The color versions. All PC emulators do color... +pcansi|ibm-pc terminal programs claiming to be ansi:\ + :tc=klone+color:tc=pcansi-m: +pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines:\ + :li#25:tc=pcansi: +pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines:\ + :li#33:tc=pcansi: +pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines:\ + :li#43:tc=pcansi: + +# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. +# If you want pound signs rather than dollars, replace `B' with `A' +# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes:\ + :5i:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\ + :cb=\E[1K:ch=\E[%i%dG:ct=\E[2g:cv=\E[%i%dd:ec=\E[%dX:ei=:\ + :im=:kB=\E[Z:kI=\E[L:kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:\ + :nw=\r\E[S:pf=\E[4i:po=\E[5i:..rp=%p1%c\E[%p2%{1}%-%db:\ + :s0=\E(B:s1=\E)B:s2=\E*B:s3=\E+B:ta=\E[I:\ + :tc=pcansi-m: + +# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in +# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi|ansi/pc-term compatible with color:\ + :u6=\E[%i%d;%dR:u7=\E[6n:..u8=\E[?%[;0123456789]c:\ + :u9=\E[c:\ + :tc=ecma+color:tc=klone+sgr:tc=ansi-m: + +# ansi-generic is a vanilla ANSI terminal. This is assumed to implement +# all the normal ANSI stuff with no extensions. It assumes +# insert/delete line/char is there, so it won't work with +# vt100 clones. It assumes video attributes for bold, blink, +# underline, and reverse, which won't matter much if the terminal +# can't do some of those. Padding is assumed to be zero, which +# shouldn't hurt since xon/xoff is assumed. +ansi-generic|generic ansi standard terminal:\ + :am:xo:\ + :co#80:li#24:tc=vanilla:tc=ansi+csr:tc=ansi+cup:\ + :tc=ansi+rca:tc=ansi+erase:tc=ansi+tabs:tc=ansi+local:\ + :tc=ansi+idc:tc=ansi+idl:tc=ansi+rep:tc=ansi+sgrbold:\ + :tc=ansi+arrows: + +#### Linux consoles +# + +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# +# The 2.2.x kernels add a private mode that sets the cursor type; use that to +# get a block cursor for cvvis. +# reported by Frank Heckenbach <frank@g-n-u.de>. +# (untranslatable capabilities removed to fit entry within 1023 bytes) +# (sgr removed to fit entry within 1023 bytes) +# (terminfo-only capabilities suppressed to fit entry within 1023 bytes) +linux|linux console:\ + :am:eo:mi:ms:xn:xo:\ + :it#8:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:IC=\E[%d@:K2=\E[G:al=\E[L:\ + :bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ + :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\ + :ei=\E[4l:ho=\E[H:ic=\E[@:im=\E[4h:k1=\E[[A:k2=\E[[B:\ + :k3=\E[[C:k4=\E[[D:k5=\E[[E:k6=\E[17~:k7=\E[18~:k8=\E[19~:\ + :k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:\ + :kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mh=\E[2m:\ + :mr=\E[7m:nd=\E[C:nw=^M^J:rc=\E8:sc=\E7:se=\E[27m:sf=^J:\ + :sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\ + :vb=200\E[?5h\E[?5l:ve=\E[?25h\E[?0c:vi=\E[?25l\E[?1c:\ + :vs=\E[?25h\E[?8c:\ + :tc=klone+sgr:tc=ecma+color: +linux-m|Linux console no color:\ + :Co@:pa@:\ + :AB@:AF@:Sb@:Sf@:tc=linux: +linux-c-nc|linux console 1.3.x hack for ncurses only:\ + :cc:\ + :..Ic=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x:\ + :oc=\E]R:\ + :tc=linux: +# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 +linux-c|linux console 1.3.6+ with private palette for each virtual console:\ + :cc:\ + :Co#8:pa#64:\ + :..Ic=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;:\ + :oc=\E]R:\ + :tc=linux: + +# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file +linux-nic|linux with ich/ich1 suppressed for non-curses programs:\ + :IC@:ei=:ic@:im=:\ + :tc=linux: + +# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. +# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. +linux-koi8|linux with koi8 alternate character set:\ + :ac=+\020\054\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224:tc=linux:\ + :tc=klone+koi8acs: + +# Another entry for KOI8-r with Qing Long's acsc. +# (which one better complies with the standard?) +linux-koi8r|linux with koi8-r alternate character set:\ + :tc=linux:tc=klone+koi8acs: + +# Entry for the latin1 and latin2 fonts +linux-lat|linux with latin1 or latin2 alternate character set:\ + :ac=+\020\054\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376:\ + :tc=linux: + +#### NetBSD consoles +# +# pcvt termcap database entries (corresponding to release 3.31) +# Author's last edit-date: [Fri Sep 15 20:29:10 1995] +# +# (For the terminfo master file, I translated these into terminfo syntax. +# Then I dropped all the pseudo-HP entries. we don't want and can't use +# the :Xs: flag. Then I split :is: into a size-independent :i1: and a +# size-dependent :is:. Finally, I added <rmam>/<smam> -- esr) + +# NOTE: :ic: has been taken out of this entry. for reference, it should +# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. +# (esr: added :vi: and :ve: to resolve NetBSD Problem Report #4583) +pcvtXX|pcvt vt200 emulator (DEC VT220):\ + :am:km:mi:ms:xn:\ + :it#8:vt#3:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:SF=\E[%dS:\ + :SR=\E[%dT:UP=\E[%dA:\ + :ac=++\054\054--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~:\ + :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:\ + :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :ct=\E[3g:dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ + :i1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:im=\E[4h:\ + :k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:k5=\E[21~:\ + :k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:kI=\E[2~:\ + :kN=\E[6~:kP=\E[5~:kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:\ + :kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:\ + :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=\EE:\ + :r1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ + :rf=/usr/share/tabset/vt100:sc=\E7:se=\E[27m:sf=\ED:\ + :so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:\ + :ve=\E[?25h:vi=\E[?25l: + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 80 columns +pcvt25|dec vt220 emulation with 25 lines:\ + :co#80:li#25:\ + :is=\E[1;25r\E[25;1H:tc=pcvtXX: +pcvt28|dec vt220 emulation with 28 lines:\ + :co#80:li#28:\ + :is=\E[1;28r\E[28;1H:tc=pcvtXX: +pcvt35|dec vt220 emulation with 35 lines:\ + :co#80:li#35:\ + :is=\E[1;35r\E[35;1H:tc=pcvtXX: +pcvt40|dec vt220 emulation with 40 lines:\ + :co#80:li#40:\ + :is=\E[1;40r\E[40;1H:tc=pcvtXX: +pcvt43|dec vt220 emulation with 43 lines:\ + :co#80:li#43:\ + :is=\E[1;43r\E[43;1H:tc=pcvtXX: +pcvt50|dec vt220 emulation with 50 lines:\ + :co#80:li#50:\ + :is=\E[1;50r\E[50;1H:tc=pcvtXX: + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 132 columns +pcvt25w|dec vt220 emulation with 25 lines and 132 cols:\ + :co#132:li#25:\ + :is=\E[1;25r\E[25;1H:tc=pcvtXX: +pcvt28w|dec vt220 emulation with 28 lines and 132 cols:\ + :co#132:li#28:\ + :is=\E[1;28r\E[28;1H:tc=pcvtXX: +pcvt35w|dec vt220 emulation with 35 lines and 132 cols:\ + :co#132:li#35:\ + :is=\E[1;35r\E[35;1H:tc=pcvtXX: +pcvt40w|dec vt220 emulation with 40 lines and 132 cols:\ + :co#132:li#40:\ + :is=\E[1;40r\E[40;1H:tc=pcvtXX: +pcvt43w|dec vt220 emulation with 43 lines and 132 cols:\ + :co#132:li#43:\ + :is=\E[1;43r\E[43;1H:tc=pcvtXX: +pcvt50w|dec vt220 emulation with 50 lines and 132 cols:\ + :co#132:li#50:\ + :is=\E[1;50r\E[50;1H:tc=pcvtXX: + +# Terminfo entries to enable the use of the ncurses library in colour on a +# NetBSD-arm32 console (only tested on a RiscPC). +# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 +# modified codes for setf/setb to setaf/setab, then to klone+color, corrected +# typo in invis - TD +arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480):\ + :am:ms:ut:xn:xo:\ + :co#80:it#8:li#30:\ + :@8=\E[M:DO=\E[%dB:K1=\E[q:K2=\E[r:K3=\E[s:K4=\E[p:K5=\E[n:\ + :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ + :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\ + :eA=\E(B\E)0:ho=\E[H:k0=\E[y:k1=\E[P:k2=\E[Q:k3=\E[R:\ + :k4=\E[S:k5=\E[t:k6=\E[u:k7=\E[v:k8=\E[l:k9=\E[w:k;=\E[x:\ + :kb=^H:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kr=\E[C:ks=\E[?1h\E=:\ + :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mk=\E[8m:\ + :mr=\E[6m:nd=\E[C:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ + :rc=\E8:\ + :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ + :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\ + :up=\E[A:us=\E[4m:\ + :tc=ecma+sgr:tc=klone+color: +arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768):\ + :co#132:li#50:tc=arm100: + +# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine +# manufactured by Sharp for the Japenese market. +# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 +x68k|x68k-ite|NetBSD/x68k ITE:\ + :co#96:li#32:\ + :%1=\E[28~:kC=\E[9~:tc=vt220: + +# <tv@pobox.com>: +# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. +# +# (still unfinished, but good enough so far.) +ofcons:\ + :bw:\ + :co#80:li#30:\ + :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\ + :LE=\233%dD:RI=\233%dC:UP=\233%dA:al=\233L:bl=^G:cd=\233J:\ + :ce=\233K:cl=^L:cm=\233%i%d;%dH:cr=^M:dc=\233P:dl=\233M:\ + :do=\233B:ei=:ic=\233@:im=:k1=\2330P:k2=\2330Q:k3=\2330W:\ + :k4=\2330x:k5=\2330t:k6=\2330u:k7=\2330q:k8=\2330r:\ + :k9=\2330p:k;=\2330M:kD=\233P:kN=\233/:kP=\233?:kb=^H:\ + :kd=\233B:kl=\233D:kr=\233C:ku=\233A:le=\233D:mb=\2337;2m:\ + :md=\2331m:me=\2330m:mh=\2332m:mk=\2338m:mr=\2337m:\ + :nd=\233C:nw=^M^J:se=\2330m:sf=^J:ta=^I:ue=\2330m:up=\233A:\ + :vb=^G: + +# NetBSD "wscons" emulator in vt220 mode +# These are micro-minimal and probably need to be redone for real +# after the manner of the pcvt entries. +wsvt25|NetBSD wscons in 25 line DEC VT220 mode:\ + :co#80:li#25:tc=vt220: + +wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta:\ + :km:\ + :co#80:li#25:tc=vt220: + +# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and +# DECstation/pmax. +rcons|BSD rasterconsole:\ + :tc=sun-il: +# Color version of above. Color currenly only provided by NetBSD. +rcons-color|BSD rasterconsole with ANSI color:\ + :ut:\ + :Co#8:pa#64:\ + :AB=\E[4%dm:AF=\E[3%dm:op=\E[m:tc=rcons: + +#### FreeBSD console entries +# +# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 +# Andrey Chernov maintains the FreeBSD termcap distributions. +# +# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade +# or comment out the :cb: capability in the console entry. +# +# Alexander Lukyanov reports: +# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. +# Now el1 clears not only to the line beginning, but also a large chunk +# of previous line. But there is another bug - ech does not work at all. +# + +# for syscons +# common entry without semigraphics +# Bug: The <op> capability resets attributes. +# Bug? The ech and el1 attributes appear to move the cursor in some cases; for +# instance el1 does if the cursor is moved to the right margin first. Removed +# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) +# +# Setting colors turns off reverse; we cannot guarantee order, so use ncv. +# Note that this disables standout with color. +cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode):\ + :NP:am:bw:eo:ms:ut:\ + :Co#8:NC#21:co#80:it#8:li#25:pa#64:\ + :@7=\E[F:AB=\E[4%p1%dm:AF=\E[3%p1%dm:AL=\E[%dL:DC=\E[%dP:\ + :DL=\E[%dM:DO=\E[%dB:F1=\E[W:F2=\E[X:IC=\E[%d@:K2=\E[E:\ + :LE=\E[%dD:RI=\E[%dC:SF=\E[%dS:SR=\E[%dT:UP=\E[%dA:\ + :al=\E[L:bl=^G:bt=\E[Z:cd=\E[J:ce=\E[K:ch=\E[%i%d`:\ + :cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:cv=\E[%i%dd:dc=\E[P:\ + :dl=\E[M:do=\E[B:ei=:ho=\E[H:ic=\E[@:im=:k1=\E[M:k2=\E[N:\ + :k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:\ + :k;=\E[V:kB=\E[Z:kD=\177:kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:\ + :kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\ + :md=\E[1m:me=\E[m:mh=\E[30;1m:mr=\E[7m:nd=\E[C:nw=\E[E:\ + :op=\E[x:r1=\E[x\E[m\Ec:se=\E[m:sf=\E[S:so=\E[7m:sr=\E[T:\ + :ta=^I:up=\E[A:ve=\E[=0C:vs=\E[=1C: +cons25|ansis|ansi80x25|freebsd console (25-line ansi mode):\ + :ac=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371:\ + :tc=cons25w: +cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode):\ + :Co@:pa@:\ + :AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25: +cons30|ansi80x30|freebsd console (30-line ansi mode):\ + :li#30:tc=cons25: +cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode):\ + :li#30:tc=cons25-m: +cons43|ansi80x43|freebsd console (43-line ansi mode):\ + :li#43:tc=cons25: +cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode):\ + :li#43:tc=cons25-m: +cons50|ansil|ansi80x50|freebsd console (50-line ansi mode):\ + :li#50:tc=cons25: +cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode):\ + :li#50:tc=cons25-m: +cons60|ansi80x60|freebsd console (60-line ansi mode):\ + :li#60:tc=cons25: +cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode):\ + :li#60:tc=cons25-m: +cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic:\ + :ac=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225:\ + :tc=cons25w: +cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono):\ + :Co@:pa@:\ + :AB@:AF@:op@:ue=\E[m:us=\E[4m:tc=cons25r: +cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines):\ + :li#50:tc=cons25r: +cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono):\ + :li#50:tc=cons25r-m: +cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines):\ + :li#60:tc=cons25r: +cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono):\ + :li#60:tc=cons25r-m: +# ISO 8859-1 FreeBSD console +cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars:\ + :ac=+\253\054\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237:\ + :tc=cons25w: +cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono):\ + :Co@:pa@:\ + :AB@:AF@:md@:mh@:op@:ue=\E[m:us=\E[4m:tc=cons25l1: +cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines):\ + :li#50:tc=cons25l1: +cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono):\ + :li#50:tc=cons25l1-m: +cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines):\ + :li#60:tc=cons25l1: +cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono):\ + :li#60:tc=cons25l1-m: + +#### 386BSD and BSD/OS Consoles +# + +# This was the original 386BSD console entry (I think). +# Some places it's named oldpc3|oldibmpc3. +# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> +origpc3|origibmpc3|IBM PC 386BSD Console:\ + :am:bw:eo:xo:\ + :co#80:li#25:\ + :ac=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263:\ + :cd=\E[J:ce=\E[K:cl=\Ec:cm=\E[%i%2;%2H:do=\E[B:ho=\E[H:\ + :kd=\E[B:kh=\E[Y:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[7m:\ + :me=\E[m\E[1;0x\E[2;7x:nd=\E[C:se=\E[1;0x\E[2;7x:\ + :sf=\E[S:so=\E[1;7x\E[2;0x:sr=\E[T:ue=\E[1;0x\E[2;7x:\ + :up=\E[A:us=\E[1;7x\E[2;0x: + +# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) +oldpc3|oldibmpc3|old IBM PC BSD/386 Console:\ + :km:\ + :li#25:\ + :al=\E[L:bl=^G:cr=^M:dl=\E[M:do=^J:kH=\E[F:kI=\E[L:kN=\E[G:\ + :kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:ku=\E[A:\ + :md=\E[=15F:me=\E[=R:mh=\E[=8F:nw=^M^J:sf=^J:ta=^I: + +# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 +# Note, the emulator supports many of the additional console features +# listed in the iBCS2 (e.g. character-set selection) though not all +# are described here. This entry really ought to be upgraded. +# Also note, the console will also work with fewer lines after doing +# "stty rows NN", e.g. to use 24 lines. +# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) +# Bug: The <op> capability resets attributes. +bsdos-pc-nobold|BSD/OS PC console w/o bold:\ + :am:eo:km:xo:\ + :co#80:it#8:li#25:\ + :AL=\E[%dL:DL=\E[%dM:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\ + :UP=\E[%dA:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\Ec:\ + :cm=\E[%i%d;%dH:cr=^M:dl=\E[M:do=^J:ho=\E[H:kH=\E[F:\ + :kI=\E[L:kN=\E[G:kP=\E[I:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:\ + :kr=\E[C:ku=\E[A:le=^H:nd=\E[C:nw=^M^J:rc=\E8:\ + :..sa=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;:\ + :sc=\E7:sf=^J:ta=^I:up=\E[A:\ + :tc=klone+sgr:tc=klone+color: +bsdos-pc|IBM PC BSD/OS Console:\ + :..sa=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m:tc=bsdos-pc-nobold: + +# Old names for BSD/OS PC console used in releases before 4.1. +pc3|BSD/OS on the PC Console:\ + :tc=bsdos-pc-nobold: +ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline:\ + :tc=bsdos-pc: + +# BSD/OS on the SPARC +bsdos-sparc|Sun SPARC BSD/OS Console:\ + :tc=sun: + +# BSD/OS on the PowerPC +bsdos-ppc|PowerPC BSD/OS Console:\ + :tc=bsdos-pc: + +#### DEC VT100 and compatibles +# +# DEC terminals from the vt100 forward are collected here. Older DEC terminals +# and micro consoles can be found in the `obsolete' section. More details on +# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be +# found near the end of this file. +# +# Except where noted, these entries are DEC's official terminfos. +# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support +# Engineering for more information. Updated terminfos and termcaps +# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. +# +# In October 1995 DEC sold its terminals business, including the VT and Dorio +# line and trademark, to SunRiver Data Systems. SunRiver has since changed +# its name to Boundless Technologies; see http://www.boundless.com. +# + +# NOTE: Any VT100 emulation, whether in hardware or software, almost +# certainly includes what DEC called the `Level 1 editing extension' codes; +# only the very oldest VT100s lacked these and there probably aren't any of +# those left alive. To capture these, use one of the VT102 entries. +# +# Note that the :xn: glitch in vt100 is not quite the same as on the Concept, +# since the cursor is left in a different position while in the +# weird state (concept at beginning of next line, vt100 at end +# of this line) so all versions of vi before 3.7 don't handle +# :xn: right on vt100. The correct way to handle :xn: is when +# you output the char in column 80, immediately output CR LF +# and then assume you are in column 1 of the next line. If :xn: +# is on, am should be on too. +# +# I assume you have smooth scroll off or are at a slow enough baud +# rate that it doesn't matter (1200? or less). Also this assumes +# that you set auto-nl to "on", if you set it off use vt100-nam +# below. +# +# The padding requirements listed here are guesses. It is strongly +# recommended that xon/xoff be enabled, as this is assumed here. +# +# The vt100 uses <rs2> and <rf> rather than :is:/:ct:/:st: because the +# tab settings are in non-volatile memory and don't need to be +# reset upon login. Also setting the number of columns glitches +# the screen annoyingly. You can type "reset" to get them set. +# +# The VT100 series terminals have cursor ("arrows") keys which can operate +# in two different modes: Cursor Mode and Application Mode. Cursor Mode +# is the reset state, and is assumed to be the normal state. Application +# Mode is the "set" state. In Cursor Mode, the cursor keys transmit +# "Esc [ {code}" sequences, conforming to ANSI standards. In Application +# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode +# was provided primarily as an aid to the porting of VT52 applications. It is +# assumed that the cursor keys are normally in Cursor Mode, and expected that +# applications such as vi will always transmit the :ks: string. Therefore, +# the definitions for the cursor keys are made to match what the terminal +# transmits after the :ks: string is transmitted. If the :ks: string +# is a null string or is not defined, then cursor keys are assumed to be in +# "Cursor Mode", and the cursor keys definitions should match that assumption, +# else the appication may fail. It is also expected that applications will +# always transmit the :ke: string to the terminal before they exit. +# +# The VT100 series terminals have an auxilliary keypad, commonly referred to as +# the "Numeric Keypad", because it is a cluster of numeric and function keys. +# The Numeric Keypad which can operate in two different modes: Numeric Mode and +# Application Mode. Numeric Mode is the reset state, and is assumed to be +# the normal state. Application Mode is the "set" state. In Numeric Mode, +# the numeric and punctuation keys transmit ASCII 7-bit characters, and the +# Enter key transmits the same as the Return key (Note: the Return key +# can be configured to send either LF (\015) or CR LF). In Application Mode, +# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys +# always send the same "Esc O {code}" sequences. It is assumed that the keypad +# is normally in Numeric Mode. If an application requires that the keypad be +# in Application Mode then it is expected that the user, or the application, +# will set the TERM environment variable to point to a terminfo entry which has +# defined the :ks: string to include the codes that switch the keypad into +# Application Mode, and the terminfo entry will also define function key +# fields to match the Application Mode control codes. If the :ks: string +# is a null string or is not defined, then the keypad is assumed to be in +# Numeric Mode. If the :ks: string switches the keypad into Application +# Mode, it is expected that the :ke: string will contain the control codes +# necessary to reset the keypad to "Normal" mode, and it is also expected that +# applications which transmit the :ks: string will also always transmit the +# :ke: string to the terminal before they exit. +# +# Here's a diagram of the VT100 keypad keys with their bindings. +# The top line is the name of the key (some DEC keyboards have the keys +# labelled somewhat differently, like GOLD instead of PF1, but this is +# the most "official" name). The second line is the escape sequence it +# generates in Application Keypad mode (where "$" means the ESC +# character). The third line contains two items, first the mapping of +# the key in terminfo, and then in termcap. +# _______________________________________ +# | PF1 | PF2 | PF3 | PF4 | +# | $OP | $OQ | $OR | $OS | +# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| +# | 7 8 9 - | +# | $Ow | $Ox | $Oy | $Om | +# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| +# | 4 | 5 | 6 | , | +# | $Ot | $Ou | $Ov | $Ol | +# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| +# | 1 | 2 | 3 | | +# | $Oq | $Or | $Os | enter | +# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | +# | 0 | . | | +# | $Op | $On | | +# |___kc1_______K4____|_kc3__K5_|_kent_@8_| +# +# And here, for those of you with orphaned VT100s lacking documentation, is +# a description of the soft switches invoked when you do `Set Up'. +# +# Scroll 0-Jump Shifted 3 0-# +# | 1-Smooth | 1-British pound sign +# | Autorepeat 0-Off | Wrap Around 0-Off +# | | 1-On | | 1-On +# | | Screen 0-Dark Bkg | | New Line 0-Off +# | | | 1-Light Bkg | | | 1-On +# | | | Cursor 0-Underline | | | Interlace 0-Off +# | | | | 1-Block | | | | 1-On +# | | | | | | | | +# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings +# | | | | | | | | +# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz +# | | | 1-On | | | 1-50 Hz +# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits +# | | 1-ANSI | | 1-8 Bits +# | Keyclick 0-Off | Parity 0-Off +# | 1-On | 1-On +# Margin Bell 0-Off Parity Sense 0-Odd +# 1-On 1-Even +# +# The following SET-UP modes are assumed for normal operation: +# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS +# WRAP_AROUND_ON JUMP_SCROLL_OFF +# Other SET-UP modes may be set for operator convenience or communication +# requirements; I recommend +# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# +# Unless you have a graphics add-on such as Digital Engineering's VT640 +# (and even then, whenever it can be arranged!) you should set +# INTERLACE_OFF +# +# (vt100: I added <rmam>/<smam> based on the init string, also :bs:. -- esr) +vt100|vt100-am|dec vt100 (w/advanced video):\ + :am:bs:ms:xn:xo:\ + :co#80:it#8:li#24:vt#3:\ + :@8=\EOM:DO=\E[%dB:K1=\EOq:K2=\EOr:K3=\EOs:K4=\EOp:K5=\EOn:\ + :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=^O:as=^N:bl=^G:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ + :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:do=^J:\ + :eA=\E(B\E)0:ho=\E[H:k0=\EOy:k1=\EOP:k2=\EOQ:k3=\EOR:\ + :k4=\EOS:k5=\EOt:k6=\EOu:k7=\EOv:k8=\EOl:k9=\EOw:k;=\EOx:\ + :kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:\ + :ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m\017:mr=\E[7m:\ + :nd=\E[C:r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ + :..sa=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;:\ + :sc=\E7:se=\E[m:sf=^J:so=\E[7m:sr=\EM:st=\EH:ta=^I:ue=\E[m:\ + :up=\E[A:us=\E[4m: +vt100nam|vt100-nam|vt100 no automargins:\ + :am@:xn@:tc=vt100-am: +vt100-vb|dec vt100 (w/advanced video) & no beep:\ + :bl@:vb=\E[?5h\E[?5l:tc=vt100: + +# Ordinary vt100 in 132 column ("wide") mode. +vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video):\ + :co#132:li#24:\ + :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-am: +vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin):\ + :co#132:li#14:vt@:\ + :r2=\E>\E[?3h\E[?4l\E[?5l\E[?8h:tc=vt100-nam: + +# vt100 with no advanced video. +vt100-nav|vt100 without advanced video option:\ + :sg#1:\ + :mb@:md@:me@:mr@:sa@:se=\E[m:so=\E[7m:ue@:us@:tc=vt100: +vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option):\ + :co#132:li#14:tc=vt100-nav: + +# vt100 with one of the 24 lines used as a status line. +# We put the status line on the top. +vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline:\ + :es:hs:\ + :li#23:\ + :cl=\E[2;1H\E[J:cm=\E[%i%+^A;%dH:cs=\E[%i%i%d;%dr:\ + :ds=\E7\E[1;24r\E8:fs=\E8:ho=\E[2;1H:is=\E7\E[2;24r\E8:\ + :ts=\E7\E[1;%p1%dH\E[1K:\ + :tc=vt100-am: + +# Status line at bottom. +# Clearing the screen will clobber status line. +vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline:\ + :es:hs:\ + :li#23:\ + :ds=\E7\E[1;24r\E8:fs=\E8:is=\E[1;23r\E[23;1H:\ + :ts=\E7\E[24;%p1%dH\E[1K:\ + :tc=vt100-am: + +# Most of the `vt100' emulators out there actually emulate a vt102 +# This entry (or vt102-nsgr) is probably the right thing to use for +# these. +vt102|dec vt102:\ + :mi:\ + :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4l:im=\E[4h:tc=vt100: +vt102-w|dec vt102 in wide mode:\ + :co#132:\ + :r3=\E[?3h:tc=vt102: + +# Many brain-dead PC comm programs that pretend to be `vt100-compatible' +# fail to interpret the ^O and ^N escapes properly. Symptom: the :me: +# string in the canonical vt100 entry above leaves the screen littered +# with little snowflake or star characters (IBM PC ROM character \017 = ^O) +# after highlight turnoffs. This entry should fix that, and even leave +# ACS support working, at the cost of making multiple-highlight changes +# slightly more expensive. +# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 +vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes):\ + :me=\E[m:sa@:\ + :tc=vt102: + +# VT125 Graphics CRT. Clear screen also erases graphics +vt125|vt125 graphics terminal:\ + :cl=\E[H\E[2J\EPpS(E)\E\:tc=vt100: + +# This isn't a DEC entry, it came from University of Wisconsin. +# (vt131: I added <rmam>/<smam> based on the init string, also :bs: -- esr) +vt131|dec vt131:\ + :am:bs:xn:\ + :co#80:it#8:li#24:vt#3:\ + :RA=\E[?7h:SA=\E[?7h:bl=^G:cd=50\E[J:ce=3\E[K:\ + :cl=50\E[;H\E[2J:cm=5\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :do=^J:ho=\E[H:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:\ + :k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\ + :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=2\E[5m:md=2\E[1m:\ + :me=2\E[m:mr=2\E[7m:nd=2\E[C:nw=^M^J:\ + :r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:sc=\E7:\ + :se=2\E[m:so=2\E[7m:sr=5\EM:ta=^I:ue=2\E[m:up=2\E[A:\ + :us=2\E[4m: + +# vt132 - like vt100 but slower and has ins/del line and such. +# I'm told that :im:/:ei: are backwards in the terminal from the +# manual and from the ANSI standard, this describes the actual +# terminal. I've never actually used a vt132 myself, so this +# is untested. +# +vt132|DEC vt132:\ + :xn:\ + :al=\E[L:dc=\E[P:dl=\E[M:ei=\E[4h:im=\E[4l:ip=:sf=\n:tc=vt100: + +# This vt220 description maps F5--F9 to the second block of function keys +# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict +# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. +# PF1--PF4 are used as F1--F4. +# +vt220-old|vt200-old|DEC VT220 in vt100 emulation mode:\ + :am:bs:mi:pt:xn:xo:\ + :co#80:li#24:vt#3:\ + :@7=\E[4~:RA=\E[?7l:SA=\E[?7h:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ + :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ + :if=/usr/share/tabset/vt100:im=\E[4h:\ + :is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\ + :k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:k9=\E[21~:\ + :k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=^H:\ + :kd=\E[B:kh=\E[1~:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\ + :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nl=^J:\ + :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ + :rf=/usr/share/tabset/vt100:\ + :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ + :sc=\E7:se=\E[27m:sf=20\ED:so=\E[7m:sr=14\EM:ta=^I:\ + :ue=\E[24m:up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l: + +# A much better description of the VT200/220; used to be vt220-8 +# (untranslatable capabilities removed to fit entry within 1023 bytes) +# (sgr removed to fit entry within 1023 bytes) +# (terminfo-only capabilities suppressed to fit entry within 1023 bytes) +vt220|vt200|dec vt220:\ + :am:bs:mi:ms:xn:xo:\ + :co#80:it#8:li#24:vt#3:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:bl=^G:\ + :cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ + :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\ + :ei=\E[4l:ho=\E[H:if=/usr/share/tabset/vt100:im=\E[4h:\ + :is=\E[?7h\E[>\E[?1h\E F\E[?4l:k1=\EOP:k2=\EOQ:k3=\EOR:\ + :k4=\EOS:k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:kI=\E[2~:\ + :kN=\E[6~:kP=\E[5~:kb=^H:kd=\E[B:kh=\E[H:kl=\E[D:kr=\E[C:\ + :ku=\E[A:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ + :nw=\EE:rc=\E8:sc=\E7:se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:\ + :st=\EH:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m:vb=\E[?5h\E[?5l: +vt220-w|vt200-w|DEC vt220 in wide mode:\ + :co#132:\ + :r3=\E[?3h:tc=vt220: +# (untranslatable capabilities removed to fit entry within 1023 bytes) +# (sgr removed to fit entry within 1023 bytes) +# (terminfo-only capabilities suppressed to fit entry within 1023 bytes) +vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode:\ + :am:bs:mi:ms:xn:xo:\ + :co#80:it#8:li#24:vt#3:\ + :AL=\233%dL:DC=\233%dP:DL=\233%dM:DO=\233%dB:IC=\233%d@:\ + :LE=\233%dD:RI=\233%dC:UP=\233%dA:ae=^O:al=\233L:as=^N:\ + :bl=^G:cd=\233J:ce=\233K:cl=\233H\233J:cm=\233%i%d;%dH:\ + :cr=^M:cs=\233%i%d;%dr:ct=\2333g:dc=\233P:dl=\233M:do=^J:\ + :ec=\233%dX:ei=\2334l:ho=\233H:\ + :if=/usr/share/tabset/vt100:im=\2334h:\ + :is=\233?7h\233>\233?1h\E F\233?4l:k1=\EOP:k2=\EOQ:\ + :k3=\EOR:k4=\EOS:k6=\23317~:k7=\23318~:k8=\23319~:\ + :k9=\23320~:kI=\2332~:kN=\2336~:kP=\2335~:kb=^H:kd=\233B:\ + :kh=\233H:kl=\233D:kr=\233C:ku=\233A:le=^H:mb=\2335m:\ + :md=\2331m:me=\233m:mr=\2337m:nd=\233C:nw=\EE:rc=\E8:\ + :sc=\E7:se=\23327m:sf=\ED:so=\2337m:sr=\EM:st=\EH:ta=^I:\ + :ue=\23324m:up=\233A:us=\2334m:vb=\233?5h\233?5l: + +# +# vt220d: +# This vt220 description regards F6--F10 as the second block of function keys +# at the top of the keyboard. This mapping follows the description given +# in the VT220 Programmer Reference Manual and agrees with the labeling +# on some terminals that emulate the vt220. There is no support for an F5. +# See vt220 for an alternate mapping. +# +vt220d|DEC VT220 in vt100 mode with DEC function key labeling:\ + :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ + :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:k5@:\ + :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\ + :tc=vt220-old: + +vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins:\ + :am@:\ + :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220: + +# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko +# (not an official DEC entry!) +# The problem with real vt220 terminals is they don't send escapes when in +# in vt220 mode. This can be gotten around two ways. 1> don't send +# escapes or 2> put the vt220 into vt100 mode and use all the nifty +# features of vt100 advanced video which it then has. +# +# This entry takes the view of putting a vt220 into vt100 mode so +# you can use the escape key in emacs and everything else which needs it. +# +# You probably don't want to use this on a VMS machine since VMS will think +# it has a vt220 and will get fouled up coming out of emacs +# +# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 +# (Added vt100 :rc:,:sc: to quiet a tic warning -- esr) +vt200-js|vt220-js|dec vt200 series with jump scroll:\ + :am:\ + :co#80:\ + :al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\ + :cr=^M:cs=\E[%i%d;%dr:dc=\E[P:dl=\E[M:dm=:do=^J:ed=:\ + :ei=\E[4l:ho=\E[H:im=\E[4h:\ + :is=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m:\ + :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:kb=^H:kd=\EOB:\ + :ke=\E[?1l\E>:kl=\EOD:kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:\ + :nw=^M\ED:r1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:rc=\E8:\ + :rf=/usr/lib/tabset/vt100:sc=\E7:se=5\E[27m:sf=\ED:\ + :so=5\E[7m:sr=\EM:ta=^I:ue=\E[24m:up=\E[A:us=\E[4m: + + +# This was DEC's vt320. Use the purpose-built one below instead +#vt320|DEC VT320 in vt100 emulation mode, +# use=vt220, + +# +# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. +# +vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode:\ + :am@:\ + :r2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h:tc=vt220: + +# These entries are not DEC's official ones, they were purpose-built for the +# VT320. Here are the designer's notes: +# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to +# 'Erase to End of Field'... since nothing seems to use 'end' anyways... +# khome is Home on a PC kbd. Actually 'FIND' on a VT. +# Things that use <knxt> usually use tab anyways... and things that don't use +# tab usually use <knxt> instead... +# kprv is same as tab - Backtab is useless... +# I left out :sa: because of its RIDICULOUS complexity, +# and the resulting fact that it causes the termcap translation of the entry +# to SMASH the 1k-barrier... +# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 +# (vt320: uncommented :fs:, comnmmented out <kslt> to avoid a conflict --esr) +# (untranslatable capabilities removed to fit entry within 1023 bytes) +# (sgr removed to fit entry within 1023 bytes) +# (terminfo-only capabilities suppressed to fit entry within 1023 bytes) +vt320|vt300|dec vt320 7 bit terminal:\ + :am:es:hs:mi:ms:xn:\ + :co#80:li#24:ws#80:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :K1=\EOw:K2=\EOu:K3=\EOy:K4=\EOq:K5=\EOs:LE=\E[%dD:\ + :RI=\E[%dC:UP=\E[%dA:ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:\ + :ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:\ + :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:ec=\E[%dX:\ + :ei=\E[4l:fs=\E[0$}:ho=\E[H:im=\E[4h:\ + :is=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ + :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\ + :k8=\E[19~:k9=\E[20~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\ + :kb=\177:kd=\EOB:ke=\E[?1l\E>:kh=\E[1~:kl=\EOD:kr=\EOC:\ + :ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:me=\E[m:\ + :mr=\E[7m:nd=\E[C:nw=\EE:rc=\E8:sc=\E7:se=\E[m:sf=\ED:\ + :so=\E[7m:sr=\EM:st=\EH:ta=^I:ts=\E[1$}\E[H\E[K:ue=\E[m:\ + :up=\E[A:us=\E[4m:ve=\E[?25h:vi=\E[?25l: +vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy:\ + :am@:\ + :is=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\ + :r2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\ + :tc=vt320: +# We have to init 132-col mode, not 80-col mode. +vt320-w|vt300-w|dec vt320 wide 7 bit terminal:\ + :co#132:ws#132:\ + :is=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ + :r2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ + :tc=vt320: +vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am:\ + :am@:\ + :is=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\ + :r2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H:\ + :tc=vt320-w: + +# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals +# which are pretty much a superset of the VT320. They have the +# host writable status line, yet another different DRCS matrix size, +# and such, but they add the DEC Technical character set, Multiple text +# pages, selectable length pages, and the like. The difference between +# the vt330 and vt340 is that the latter has only 2 planes and a monochrome +# monitor, the former has 4 planes and a color monitor. These terminals +# support VT131 and ANSI block mode, but as with much of these things, +# termcap/terminfo doesn't deal with these features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap or terminfo entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt340: string capability "sb=\E[M" corrected to "sr"; +# also, added <rmam>/<smam> based on the init string -- esr) +vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page:\ + :am:es:hs:mi:ms:xn:xo:\ + :co#80:it#8:li#24:vt#3:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :LE=\E[%dD:RA=\E[?7l:RI=\E[%dC:SA=\E[?7h:UP=\E[%dA:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=^O:al=\E[L:as=^N:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\ + :cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:\ + :dl=\E[M:do=^J:ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:\ + :fs=\E[$}:ho=\E[H:im=\E[4h:\ + :is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ + :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\ + :k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\ + :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:l1=pf1:l2=pf2:l3=pf3:l4=pf4:\ + :le=^H:mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:\ + :r1=\E[?3l:rc=\E8:rf=/usr/share/tabset/vt300:sc=\E7:\ + :se=\E[27m:sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ + :ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\ + :vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h: + +# DEC doesn't supply a vt400 description, so we add Daniel Glasser's +# (originally written with vt420 as its primary name, and usable for it). +# +# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple +# text pages and long text pages with selectable length of the vt340, along +# with left and right margins, rectangular area text copy, fill, and erase +# operations, selected region character attribute change operations, +# page memory and rectangle checksums, insert/delete column, reception +# macros, and other features too numerous to remember right now. TERMCAP +# can only take advantage of a few of these added features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; +# also, added <rmam>/<smam> based on the init string -- esr) +# (untranslatable capabilities removed to fit entry within 1023 bytes) +# (sgr removed to fit entry within 1023 bytes) +# (terminfo-only capabilities suppressed to fit entry within 1023 bytes) +vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap:\ + :am:es:hs:mi:ms:xn:xo:\ + :co#80:it#8:li#24:vt#3:\ + :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ + :LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:\ + :cd=10\E[J:ce=4\E[K:cl=10\E[H\E[J:cm=\E[%i%d;%dH:cr=^M:\ + :cs=\E[%i%d;%dr:ct=\E[3g:dc=\E[P:dl=\E[M:do=^J:\ + :ds=\E[2$~\r\E[1$}\E[K\E[$}:ei=\E[4l:fs=\E[$}:ho=\E[H:\ + :ic=\E[@:im=\E[4h:\ + :is=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H:\ + :k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:k6=\E[17~:k7=\E[18~:\ + :k8=\E[19~:k9=\E[20~:kb=^H:kd=\EOB:ke=\E[?1l\E>:kl=\EOD:\ + :kr=\EOC:ks=\E[?1h\E=:ku=\EOA:le=^H:mb=\E[5m:md=\E[1m:\ + :me=\E[m:mr=\E[7m:nd=\E[C:nw=^M\ED:rc=\E8:sc=\E7:se=\E[27m:\ + :sf=\ED:so=\E[7m:sr=\EM:st=\EH:ta=^I:\ + :ts=\E[2$~\E[1$}\E[1;%dH:ue=\E[24m:up=\E[A:us=\E[4m:\ + :vb=200\E[?5h\E[?5l:ve=\E[?25h:vi=\E[?25l:vs=\E[?25h: + +# (vt420: I removed :k0:, it collided with <kf10>. I also restored +# a missing :sc: -- esr) +vt420|DEC VT420:\ + :am:mi:xn:xo:\ + :co#80:li#24:vt#3:\ + :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\ + :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ + :SA=\E[?7h:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ + :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ + :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\ + :im=\E[4h:is=\E[1;24r\E[24;1H:k1=\EOP:k2=\EOQ:k3=\EOR:\ + :k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\ + :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\ + :kb=^H:kd=\E[B:ke=\E>:kl=\E[D:kr=\E[C:ks=\E=:ku=\E[A:le=^H:\ + :mb=\E[5m:md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:\ + :r3=\E[?67h\E[64;1"p:rc=\E8:rf=/usr/share/tabset/vt300:\ + :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;:\ + :sc=\E7:se=\E[m:sf=\ED:so=\E[7m:sr=\EM:ta=^I:ue=\E[m:\ + :up=\E[A:us=\E[4m: + +# +# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) +# takes two parameters, the key and the string. Translating the key is +# straightforward (keys 1-5 are not defined on real terminals, though some +# emulators define these): +# +# if (key < 16) then value = key; +# else if (key < 21) then value = key + 1; +# else if (key < 25) then value = key + 2; +# else if (key < 27) then value = key + 3; +# else if (key < 30) then value = key + 4; +# else value = key + 5; +# +# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". +# There's no provision in terminfo for emitting a string in this format, so the +# application has to know it. +# +vt420pc|DEC VT420 w/PC keyboard:\ + :@7=\E[4~:F1=\E[23~:F2=\E[24~:F3=\E[11;2~:F4=\E[12;2~:\ + :F5=\E[13;2~:F6=\E[14;2~:F7=\E[15;2~:F8=\E[17;2~:\ + :F9=\E[18;2~:FA=\E[19;2~:FB=\E[20;2~:FC=\E[21;2~:\ + :FD=\E[23;2~:FE=\E[24;2~:FF=\E[23~:FG=\E[24~:FH=\E[25~:\ + :FI=\E[26~:FJ=\E[28~:FK=\E[29~:FL=\E[31~:FM=\E[32~:\ + :FN=\E[33~:FO=\E[34~:FP=\E[35~:FQ=\E[36~:FR=\E[23;2~:\ + :FS=\E[24;2~:FT=\E[25;2~:FU=\E[26;2~:FV=\E[28;2~:\ + :FW=\E[29;2~:FX=\E[31;2~:FY=\E[32;2~:FZ=\E[33;2~:\ + :Fa=\E[34;2~:Fb=\E[35;2~:Fc=\E[36;2~:\ + :S6=USR_TERM\072vt420pcdos\072:k1=\E[11~:k2=\E[12~:\ + :k3=\E[13~:k4=\E[14~:k5=\E[15~:k6=\E[17~:k7=\E[18~:\ + :k8=\E[19~:k9=\E[20~:k;=\E[21~:kD=\177:kh=\E[H:\ + :..px=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\:tc=vt420: + +vt420pcdos|DEC VT420 w/PC for DOS Merge:\ + :li#25:\ + :S1=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;:\ + :S4=\E[?1;2r\E[34h:\ + :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:S6@:\ + :me=\E[m:sa@:\ + :tc=vt420pc: + +vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys:\ + :F1=\E[23~:F2=\E[24~:F3=\E[25~:F4=\E[26~:F5=\E[28~:\ + :F6=\E[29~:F7=\E[31~:F8=\E[32~:F9=\E[33~:FA=\E[34~:\ + :k1=\E[11~:k2=\E[12~:k3=\E[13~:k4=\E[14~:k5=\E[15~:\ + :k6=\E[17~:k7=\E[18~:k8=\E[19~:k9=\E[20~:k;=\E[21~:\ + :kD=\177:kh=\E[H:l1=\EOP:l2=\EOQ:l3=\EOR:l4=\EOS:\ + :tc=vt420: + +vt510|DEC VT510:\ + :tc=vt420: +vt510pc|DEC VT510 w/PC keyboard:\ + :tc=vt420pc: +vt510pcdos|DEC VT510 w/PC for DOS Merge:\ + :tc=vt420pcdos: + +# VT520/VT525 +# +# The VT520 is a monochrome text terminal capable of managing up to +# four independent sessions in the terminal. It has multiple ANSI +# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) +# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, +# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. +# +# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or +# [Alt]/[Print Screen] depending upon which keyboard and which +# terminal mode is being used. If Set-Up has been disabled or +# assigned to an unknown key, Set-Up may be entered by pressing +# [F3] as the first key after power up, regardless of keyboard type. +# (vt520: I added <rmam>/<smam> based on the init string, also :sc: -- esr) +# (untranslatable capabilities removed to fit entry within 1023 bytes) +vt520|DEC VT520:\ + :am:mi:xn:xo:\ + :co#80:li#24:vt#3:\ + :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\ + :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ + :SA=\E[?7h:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ + :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ + :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\ + :im=\E[4h:is=\E[1;24r\E[24;1H:k0=\E[29~:k1=\EOP:k2=\EOQ:\ + :k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\ + :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\ + :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\ + :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:r3=\E[?67h\E[64;1"p:\ + :rc=\E8:rf=/usr/share/tabset/vt300:sc=\E7:se=\E[m:sf=\ED:\ + :so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: + +# (vt525: I added <rmam>/<smam> based on the init string; +# removed :se:=\E[m, :ue:=\E[m, added :sc: -- esr) +# (untranslatable capabilities removed to fit entry within 1023 bytes) +vt525|DEC VT525:\ + :am:mi:xn:xo:\ + :co#80:li#24:vt#3:\ + :*6=\E[4~:@0=\E[1~:RA=\E[?7l:\ + :S5=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:\ + :SA=\E[?7h:\ + :ac=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~:\ + :ae=\E(B:al=\E[L:as=\E(0:bl=^G:cd=\E[J:ce=\E[K:\ + :cl=\E[H\E[2J:cm=\E[%i%d;%dH:cr=^M:cs=\E[%i%d;%dr:\ + :dc=\E[P:dl=\E[M:do=\E[B:ei=\E[4l:ho=\E[H:\ + :i2=\E[?67h\E[64;1"p:if=/usr/share/tabset/vt300:\ + :im=\E[4h:is=\E[1;24r\E[24;1H:k0=\E[29~:k1=\EOP:k2=\EOQ:\ + :k3=\EOR:k4=\EOS:k5=\E[17~:k6=\E[18~:k7=\E[19~:k8=\E[20~:\ + :k9=\E[21~:k;=\E[29~:kD=\E[3~:kI=\E[2~:kN=\E[6~:kP=\E[5~:\ + :kb=^H:kd=\E[B:kl=\E[D:kr=\E[C:ku=\E[A:le=^H:mb=\E[5m:\ + :md=\E[1m:me=\E[m:mr=\E[7m:nd=\E[C:r3=\E[?67h\E[64;1"p:\ + :rc=\E8:rf=/usr/share/tabset/vt300:sc=\E7:se=\E[m:sf=\ED:\ + :so=\E[7m:sr=\EM:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: diff --git a/tests/examplefiles/terminfo b/tests/examplefiles/terminfo new file mode 100644 index 00000000..2b68d035 --- /dev/null +++ b/tests/examplefiles/terminfo @@ -0,0 +1,1445 @@ +######## This example from excerpt of <http://www.catb.org/esr/terminfo/>: +# +# Version 11.0.1 +# $Date: 2000/03/02 15:51:11 $ +# terminfo syntax +# + +######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES +# +# This section describes terminal classes and brands that are still +# quite common. +# + +#### Specials +# +# Special "terminals". These are used to label tty lines when you don't +# know what kind of terminal is on it. The characteristics of an unknown +# terminal are the lowest common denominator - they look about like a ti 700. +# + +dumb|80-column dumb tty, + am, + cols#80, + bel=^G, cr=^M, cud1=^J, ind=^J, +unknown|unknown terminal type, + gn, use=dumb, +lpr|printer|line printer, + hc, os, + cols#132, lines#66, + bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, +glasstty|classic glass tty interpreting ASCII control characters, + am, + cols#80, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, + kcud1=^J, nel=^M^J, +vanilla, + bel=^G, cr=^M, cud1=^J, ind=^J, + +#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities +# +# See the end-of-file comment for more on these. +# + +# ANSI capabilities are broken up into pieces, so that a terminal +# implementing some ANSI subset can use many of them. +ansi+local1, + cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, +ansi+local, + cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, + cuu=\E[%p1%dA, + use=ansi+local1, +ansi+tabs, + cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g, +ansi+inittabs, + it#8, use=ansi+tabs, +ansi+erase, + clear=\E[H\E[J, ed=\E[J, el=\E[K, +ansi+rca, + hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, +ansi+cup, + cup=\E[%i%p1%d;%p2%dH, home=\E[H, +ansi+rep, + rep=%p1%c\E[%p2%{1}%-%db, +ansi+idl1, + dl1=\E[M, il1=\E[L, +ansi+idl, + dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, +ansi+idc, + dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, +ansi+arrows, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + khome=\E[H, +ansi+sgr|ansi graphic renditions, + blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr0=\E[0m, +ansi+sgrso|ansi standout only, + rmso=\E[m, smso=\E[7m, +ansi+sgrul|ansi underline only, + rmul=\E[m, smul=\E[4m, +ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, + bold=\E[1m, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, +ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, + dim=\E[2m, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, +ansi+pp|ansi printer port, + mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, +ansi+csr|ansi scroll-region plus cursor save & restore, + csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, + +# The IBM PC alternate character set. Plug this into any Intel console entry. +# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the +# ROM graphics for control characters such as the diamond, up- and down-arrow. +# This works with the System V, Linux, and BSDI consoles. It's a safe bet this +# will work with any Intel console, they all seem to have inherited \E[11m +# from the ANSI.SYS de-facto standard. +klone+acs|alternate character set for ansi.sys displays, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + rmacs=\E[10m, smacs=\E[11m, + +# Highlight controls corresponding to the ANSI.SYS standard. Most +# console drivers for Intel boxes obey these. Makes the same assumption +# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, +# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. +klone+sgr|attribute control for ansi.sys displays, + blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, + rmpch=\E[10m, rmso=\E[m, rmul=\E[m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, + use=klone+acs, + +# Highlight controls corresponding to the ANSI.SYS standard. *All* +# console drivers for Intel boxes obey these. Does not assume \E[11m will +# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS +# diamond and arrow characters under curses. +klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), + blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, + rmul=\E[m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, + sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, + use=klone+acs, + +# KOI8-R (RFC1489) acs (alternate character set) +# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. +klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, + acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, + rmacs=\E[10m, smacs=\E[11m, + +# ANSI.SYS color control. The setab/setaf caps depend on the coincidence +# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer +# but equivalent strings that don't rely on that coincidence: +# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. +# They match a subset of ECMA-48. +klone+color|color control for ansi.sys and ISO6429-compatible displays, + colors#8, ncv#3, pairs#64, + op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + +# This is better than klone+color, it doesn't assume white-on-black as the +# default color pair, but many `ANSI' terminals don't grok the <op> cap. +ecma+color|color control for ECMA-48-compatible terminals, + colors#8, ncv#3, pairs#64, + op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + +# Attribute control for ECMA-48-compatible terminals +ecma+sgr|attribute capabilities for true ECMA-48 terminals, + rmso=\E[27m, rmul=\E[24m, + use=klone+sgr, + +# For comparison, here are all the capabilities implied by the Intel +# Binary Compatibility Standard (level 2) that fit within terminfo. +# For more detail on this rather pathetic standard, see the comments +# near the end of this file. +ibcs2|Intel Binary Compatibility Standard prescriptions, + cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, + cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, + hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, + indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, + smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, + +#### ANSI/ECMA-48 terminals and terminal emulators +# +# See near the end of this file for details on ANSI conformance. +# Don't mess with these entries! Lots of other entries depend on them! +# +# This section lists entries in a least-capable to most-capable order. +# if you're in doubt about what `ANSI' matches yours, try them in that +# order and back off from the first that breaks. + +# ansi-mr is for ANSI terminals with ONLY relative cursor addressing +# and more than one page of memory. It uses local motions instead of +# direct cursor addressing, and makes almost no assumptions. It does +# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. +ansi-mr|mem rel cup ansi, + am, xon, + cols#80, lines#24, use=vanilla, use=ansi+erase, + use=ansi+local1, + +# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but +# beware of screen size problems and memory relative cursor addressing. +ansi-mini|minimum ansi standard terminal, + am, xon, + cols#80, lines#24, use=vanilla, use=ansi+cup, + use=ansi+erase, + +# ansi-mtabs adds relative addressing and minimal tab support +ansi-mtabs|any ansi terminal with pessimistic assumptions, + it#8, + ht=^I, use=ansi+local1, use=ansi-mini, + +# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL +# +# The following is an entry for the full ANSI 3.64 (1977). It lacks +# padding, but most terminals using the standard are "fast" enough +# not to require any -- even at 9600 bps. If you encounter problems, +# try including the padding specifications. +# +# Note: the :as: and :ae: specifications are not implemented here, for +# the available termcap documentation does not make clear WHICH alternate +# character set to specify. ANSI 3.64 seems to make allowances for several. +# Please make the appropriate adjustments to fit your needs -- that is +# if you will be using alternate character sets. +# +# There are very few terminals running the full ANSI 3.64 standard, +# so I could only test this entry on one verified terminal (Visual 102). +# I would appreciate the results on other terminals sent to me. +# +# Please report comments, changes, and problems to: +# +# U.S. MAIL: Hugh Hansard +# Box: 22830 +# Emory University +# Atlanta, GA. 30322. +# +# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. +# +# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) +ansi77|ansi 3.64 standard 1977 version, + am, mir, + cols#80, it#8, lines#24, + bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, + rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, + smso=\E[7m, smul=\E[4m, + +# Procomm and some other ANSI emulations don't recognize all of the ANSI- +# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and +# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, +# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to +# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem +# to confuse many emulators. On the other hand, we can count on these programs +# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured +# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under +# ANSI.SYS influence. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 +pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), + am, mir, msgr, + cols#80, it#8, lines#24, + bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, + cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g, + use=klone+sgr-dumb, +pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), + lines#25, use=pcansi-m, +pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), + lines#33, use=pcansi-m, +pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), + lines#43, use=pcansi-m, +# The color versions. All PC emulators do color... +pcansi|ibm-pc terminal programs claiming to be ansi, + use=klone+color, use=pcansi-m, +pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, + lines#25, use=pcansi, +pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, + lines#33, use=pcansi, +pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, + lines#43, use=pcansi, + +# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. +# If you want pound signs rather than dollars, replace `B' with `A' +# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, + mc5i, + cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, + cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, + ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, + ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, + kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, + rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, + s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g, + vpa=\E[%i%p1%dd, use=pcansi-m, + +# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in +# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi|ansi/pc-term compatible with color, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, + u9=\E[c, + use=ecma+color, use=klone+sgr, use=ansi-m, + +# ansi-generic is a vanilla ANSI terminal. This is assumed to implement +# all the normal ANSI stuff with no extensions. It assumes +# insert/delete line/char is there, so it won't work with +# vt100 clones. It assumes video attributes for bold, blink, +# underline, and reverse, which won't matter much if the terminal +# can't do some of those. Padding is assumed to be zero, which +# shouldn't hurt since xon/xoff is assumed. +ansi-generic|generic ansi standard terminal, + am, xon, + cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, + use=ansi+rca, use=ansi+erase, use=ansi+tabs, + use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, + use=ansi+sgrbold, use=ansi+arrows, + +#### Linux consoles +# + +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# +# The 2.2.x kernels add a private mode that sets the cursor type; use that to +# get a block cursor for cvvis. +# reported by Frank Heckenbach <frank@g-n-u.de>. +linux|linux console, + am, bce, eo, mir, msgr, xenl, xon, + it#8, ncv#2, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, civis=\E[?25l\E[?1c, clear=\E[H\E[J, + cnorm=\E[?25h\E[?0c, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, cvvis=\E[?25h\E[?8c, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, + kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, + nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, + u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, + use=klone+sgr, use=ecma+color, +linux-m|Linux console no color, + colors@, pairs@, + setab@, setaf@, setb@, setf@, use=linux, +linux-c-nc|linux console 1.3.x hack for ncurses only, + ccc, + initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, + oc=\E]R, + use=linux, +# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 +linux-c|linux console 1.3.6+ with private palette for each virtual console, + ccc, + colors#8, pairs#64, + initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;, + oc=\E]R, + use=linux, + +# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file +linux-nic|linux with ich/ich1 suppressed for non-curses programs, + ich@, ich1@, + use=linux, + +# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. +# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. +linux-koi8|linux with koi8 alternate character set, + acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, + use=linux, use=klone+koi8acs, + +# Another entry for KOI8-r with Qing Long's acsc. +# (which one better complies with the standard?) +linux-koi8r|linux with koi8-r alternate character set, + use=linux, use=klone+koi8acs, + +# Entry for the latin1 and latin2 fonts +linux-lat|linux with latin1 or latin2 alternate character set, + acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, + use=linux, + +#### NetBSD consoles +# +# pcvt termcap database entries (corresponding to release 3.31) +# Author's last edit-date: [Fri Sep 15 20:29:10 1995] +# +# (For the terminfo master file, I translated these into terminfo syntax. +# Then I dropped all the pseudo-HP entries. we don't want and can't use +# the :Xs: flag. Then I split :is: into a size-independent <is1> and a +# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) + +# NOTE: <ich1> has been taken out of this entry. for reference, it should +# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. +# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) +pcvtXX|pcvt vt200 emulator (DEC VT220), + am, km, mir, msgr, xenl, + it#8, vt#3, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, + is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, + kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, + khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, + nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, + ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 80 columns +pcvt25|dec vt220 emulation with 25 lines, + cols#80, lines#25, + is2=\E[1;25r\E[25;1H, use=pcvtXX, +pcvt28|dec vt220 emulation with 28 lines, + cols#80, lines#28, + is2=\E[1;28r\E[28;1H, use=pcvtXX, +pcvt35|dec vt220 emulation with 35 lines, + cols#80, lines#35, + is2=\E[1;35r\E[35;1H, use=pcvtXX, +pcvt40|dec vt220 emulation with 40 lines, + cols#80, lines#40, + is2=\E[1;40r\E[40;1H, use=pcvtXX, +pcvt43|dec vt220 emulation with 43 lines, + cols#80, lines#43, + is2=\E[1;43r\E[43;1H, use=pcvtXX, +pcvt50|dec vt220 emulation with 50 lines, + cols#80, lines#50, + is2=\E[1;50r\E[50;1H, use=pcvtXX, + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 132 columns +pcvt25w|dec vt220 emulation with 25 lines and 132 cols, + cols#132, lines#25, + is2=\E[1;25r\E[25;1H, use=pcvtXX, +pcvt28w|dec vt220 emulation with 28 lines and 132 cols, + cols#132, lines#28, + is2=\E[1;28r\E[28;1H, use=pcvtXX, +pcvt35w|dec vt220 emulation with 35 lines and 132 cols, + cols#132, lines#35, + is2=\E[1;35r\E[35;1H, use=pcvtXX, +pcvt40w|dec vt220 emulation with 40 lines and 132 cols, + cols#132, lines#40, + is2=\E[1;40r\E[40;1H, use=pcvtXX, +pcvt43w|dec vt220 emulation with 43 lines and 132 cols, + cols#132, lines#43, + is2=\E[1;43r\E[43;1H, use=pcvtXX, +pcvt50w|dec vt220 emulation with 50 lines and 132 cols, + cols#132, lines#50, + is2=\E[1;50r\E[50;1H, use=pcvtXX, + +# Terminfo entries to enable the use of the ncurses library in colour on a +# NetBSD-arm32 console (only tested on a RiscPC). +# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 +# modified codes for setf/setb to setaf/setab, then to klone+color, corrected +# typo in invis - TD +arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), + am, bce, msgr, xenl, xon, + cols#80, it#8, lines#30, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, + invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, + kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, + kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, + kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[6m$<2>, ri=\EM$<5>, + rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, + rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, + use=ecma+sgr, use=klone+color, +arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), + cols#132, lines#50, use=arm100, + +# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine +# manufactured by Sharp for the Japenese market. +# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 +x68k|x68k-ite|NetBSD/x68k ITE, + cols#96, lines#32, + kclr=\E[9~, khlp=\E[28~, use=vt220, + +# <tv@pobox.com>: +# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. +# +# (still unfinished, but good enough so far.) +ofcons, + bw, + cols#80, lines#30, + bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, + cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, + cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, + cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, + dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, + flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, + il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, + kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, + kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, + kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, + kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, + rmso=\2330m, rmul=\2330m, sgr0=\2330m, + +# NetBSD "wscons" emulator in vt220 mode +# These are micro-minimal and probably need to be redone for real +# after the manner of the pcvt entries. +wsvt25|NetBSD wscons in 25 line DEC VT220 mode, + cols#80, lines#25, use=vt220, + +wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, + km, + cols#80, lines#25, use=vt220, + +# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and +# DECstation/pmax. +rcons|BSD rasterconsole, + use=sun-il, +# Color version of above. Color currenly only provided by NetBSD. +rcons-color|BSD rasterconsole with ANSI color, + bce, + colors#8, pairs#64, + op=\E[m, setab=\E[4%dm, setaf=\E[3%dm, use=rcons, + +#### FreeBSD console entries +# +# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 +# Andrey Chernov maintains the FreeBSD termcap distributions. +# +# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade +# or comment out the :cb: capability in the console entry. +# +# Alexander Lukyanov reports: +# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. +# Now el1 clears not only to the line beginning, but also a large chunk +# of previous line. But there is another bug - ech does not work at all. +# + +# for syscons +# common entry without semigraphics +# Bug: The <op> capability resets attributes. +# Bug? The ech and el1 attributes appear to move the cursor in some cases; for +# instance el1 does if the cursor is moved to the right margin first. Removed +# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) +# +# Setting colors turns off reverse; we cannot guarantee order, so use ncv. +# Note that this disables standout with color. +cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), + am, bce, bw, eo, msgr, npc, + colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, + cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, + hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, + kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, + kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, + kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs1=\E[x\E[m\Ec, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, + smso=\E[7m, vpa=\E[%i%p1%dd, +cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), + acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, + use=cons25w, +cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), + colors@, pairs@, + bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25, +cons30|ansi80x30|freebsd console (30-line ansi mode), + lines#30, use=cons25, +cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), + lines#30, use=cons25-m, +cons43|ansi80x43|freebsd console (43-line ansi mode), + lines#43, use=cons25, +cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), + lines#43, use=cons25-m, +cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), + lines#50, use=cons25, +cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), + lines#50, use=cons25-m, +cons60|ansi80x60|freebsd console (60-line ansi mode), + lines#60, use=cons25, +cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), + lines#60, use=cons25-m, +cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, + acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, + use=cons25w, +cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), + colors@, pairs@, + op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r, +cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), + lines#50, use=cons25r, +cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), + lines#50, use=cons25r-m, +cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), + lines#60, use=cons25r, +cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), + lines#60, use=cons25r-m, +# ISO 8859-1 FreeBSD console +cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, + acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, + use=cons25w, +cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), + colors@, pairs@, + bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25l1, +cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), + lines#50, use=cons25l1, +cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), + lines#50, use=cons25l1-m, +cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), + lines#60, use=cons25l1, +cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), + lines#60, use=cons25l1-m, + +#### 386BSD and BSD/OS Consoles +# + +# This was the original 386BSD console entry (I think). +# Some places it's named oldpc3|oldibmpc3. +# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> +origpc3|origibmpc3|IBM PC 386BSD Console, + am, bw, eo, xon, + cols#80, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, + rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, + smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, + +# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) +oldpc3|oldibmpc3|old IBM PC BSD/386 Console, + km, + lines#25, + bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, + ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, + knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, + +# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 +# Note, the emulator supports many of the additional console features +# listed in the iBCS2 (e.g. character-set selection) though not all +# are described here. This entry really ought to be upgraded. +# Also note, the console will also work with fewer lines after doing +# "stty rows NN", e.g. to use 24 lines. +# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) +# Bug: The <op> capability resets attributes. +bsdos-pc-nobold|BSD/OS PC console w/o bold, + am, eo, km, xon, + cols#80, it#8, lines#25, + bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, + kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, + sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, + use=klone+sgr, use=klone+color, +bsdos-pc|IBM PC BSD/OS Console, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold, + +# Old names for BSD/OS PC console used in releases before 4.1. +pc3|BSD/OS on the PC Console, + use=bsdos-pc-nobold, +ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, + use=bsdos-pc, + +# BSD/OS on the SPARC +bsdos-sparc|Sun SPARC BSD/OS Console, + use=sun, + +# BSD/OS on the PowerPC +bsdos-ppc|PowerPC BSD/OS Console, + use=bsdos-pc, + +#### DEC VT100 and compatibles +# +# DEC terminals from the vt100 forward are collected here. Older DEC terminals +# and micro consoles can be found in the `obsolete' section. More details on +# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be +# found near the end of this file. +# +# Except where noted, these entries are DEC's official terminfos. +# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support +# Engineering for more information. Updated terminfos and termcaps +# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. +# +# In October 1995 DEC sold its terminals business, including the VT and Dorio +# line and trademark, to SunRiver Data Systems. SunRiver has since changed +# its name to Boundless Technologies; see http://www.boundless.com. +# + +# NOTE: Any VT100 emulation, whether in hardware or software, almost +# certainly includes what DEC called the `Level 1 editing extension' codes; +# only the very oldest VT100s lacked these and there probably aren't any of +# those left alive. To capture these, use one of the VT102 entries. +# +# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, +# since the cursor is left in a different position while in the +# weird state (concept at beginning of next line, vt100 at end +# of this line) so all versions of vi before 3.7 don't handle +# <xenl> right on vt100. The correct way to handle <xenl> is when +# you output the char in column 80, immediately output CR LF +# and then assume you are in column 1 of the next line. If <xenl> +# is on, am should be on too. +# +# I assume you have smooth scroll off or are at a slow enough baud +# rate that it doesn't matter (1200? or less). Also this assumes +# that you set auto-nl to "on", if you set it off use vt100-nam +# below. +# +# The padding requirements listed here are guesses. It is strongly +# recommended that xon/xoff be enabled, as this is assumed here. +# +# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the +# tab settings are in non-volatile memory and don't need to be +# reset upon login. Also setting the number of columns glitches +# the screen annoyingly. You can type "reset" to get them set. +# +# The VT100 series terminals have cursor ("arrows") keys which can operate +# in two different modes: Cursor Mode and Application Mode. Cursor Mode +# is the reset state, and is assumed to be the normal state. Application +# Mode is the "set" state. In Cursor Mode, the cursor keys transmit +# "Esc [ {code}" sequences, conforming to ANSI standards. In Application +# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode +# was provided primarily as an aid to the porting of VT52 applications. It is +# assumed that the cursor keys are normally in Cursor Mode, and expected that +# applications such as vi will always transmit the <smkx> string. Therefore, +# the definitions for the cursor keys are made to match what the terminal +# transmits after the <smkx> string is transmitted. If the <smkx> string +# is a null string or is not defined, then cursor keys are assumed to be in +# "Cursor Mode", and the cursor keys definitions should match that assumption, +# else the appication may fail. It is also expected that applications will +# always transmit the <rmkx> string to the terminal before they exit. +# +# The VT100 series terminals have an auxilliary keypad, commonly referred to as +# the "Numeric Keypad", because it is a cluster of numeric and function keys. +# The Numeric Keypad which can operate in two different modes: Numeric Mode and +# Application Mode. Numeric Mode is the reset state, and is assumed to be +# the normal state. Application Mode is the "set" state. In Numeric Mode, +# the numeric and punctuation keys transmit ASCII 7-bit characters, and the +# Enter key transmits the same as the Return key (Note: the Return key +# can be configured to send either LF (\015) or CR LF). In Application Mode, +# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys +# always send the same "Esc O {code}" sequences. It is assumed that the keypad +# is normally in Numeric Mode. If an application requires that the keypad be +# in Application Mode then it is expected that the user, or the application, +# will set the TERM environment variable to point to a terminfo entry which has +# defined the <smkx> string to include the codes that switch the keypad into +# Application Mode, and the terminfo entry will also define function key +# fields to match the Application Mode control codes. If the <smkx> string +# is a null string or is not defined, then the keypad is assumed to be in +# Numeric Mode. If the <smkx> string switches the keypad into Application +# Mode, it is expected that the <rmkx> string will contain the control codes +# necessary to reset the keypad to "Normal" mode, and it is also expected that +# applications which transmit the <smkx> string will also always transmit the +# <rmkx> string to the terminal before they exit. +# +# Here's a diagram of the VT100 keypad keys with their bindings. +# The top line is the name of the key (some DEC keyboards have the keys +# labelled somewhat differently, like GOLD instead of PF1, but this is +# the most "official" name). The second line is the escape sequence it +# generates in Application Keypad mode (where "$" means the ESC +# character). The third line contains two items, first the mapping of +# the key in terminfo, and then in termcap. +# _______________________________________ +# | PF1 | PF2 | PF3 | PF4 | +# | $OP | $OQ | $OR | $OS | +# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| +# | 7 8 9 - | +# | $Ow | $Ox | $Oy | $Om | +# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| +# | 4 | 5 | 6 | , | +# | $Ot | $Ou | $Ov | $Ol | +# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| +# | 1 | 2 | 3 | | +# | $Oq | $Or | $Os | enter | +# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | +# | 0 | . | | +# | $Op | $On | | +# |___kc1_______K4____|_kc3__K5_|_kent_@8_| +# +# And here, for those of you with orphaned VT100s lacking documentation, is +# a description of the soft switches invoked when you do `Set Up'. +# +# Scroll 0-Jump Shifted 3 0-# +# | 1-Smooth | 1-British pound sign +# | Autorepeat 0-Off | Wrap Around 0-Off +# | | 1-On | | 1-On +# | | Screen 0-Dark Bkg | | New Line 0-Off +# | | | 1-Light Bkg | | | 1-On +# | | | Cursor 0-Underline | | | Interlace 0-Off +# | | | | 1-Block | | | | 1-On +# | | | | | | | | +# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings +# | | | | | | | | +# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz +# | | | 1-On | | | 1-50 Hz +# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits +# | | 1-ANSI | | 1-8 Bits +# | Keyclick 0-Off | Parity 0-Off +# | 1-On | 1-On +# Margin Bell 0-Off Parity Sense 0-Odd +# 1-On 1-Even +# +# The following SET-UP modes are assumed for normal operation: +# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS +# WRAP_AROUND_ON JUMP_SCROLL_OFF +# Other SET-UP modes may be set for operator convenience or communication +# requirements; I recommend +# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# +# Unless you have a graphics add-on such as Digital Engineering's VT640 +# (and even then, whenever it can be arranged!) you should set +# INTERLACE_OFF +# +# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) +vt100|vt100-am|dec vt100 (w/advanced video), + am, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq, + ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, + kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, + kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, + rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, +vt100nam|vt100-nam|vt100 no automargins, + am@, xenl@, use=vt100-am, +vt100-vb|dec vt100 (w/advanced video) & no beep, + bel@, flash=\E[?5h\E[?5l, use=vt100, + +# Ordinary vt100 in 132 column ("wide") mode. +vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, +vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), + cols#132, lines#14, vt@, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, + +# vt100 with no advanced video. +vt100-nav|vt100 without advanced video option, + xmc#1, + blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, + smul@, + use=vt100, +vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), + cols#132, lines#14, use=vt100-nav, + +# vt100 with one of the 24 lines used as a status line. +# We put the status line on the top. +vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, + eslok, hs, + lines#23, + clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, + cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, + fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, + tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, + +# Status line at bottom. +# Clearing the screen will clobber status line. +vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, + eslok, hs, + lines#23, + dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, + tsl=\E7\E[24;%p1%dH\E[1K, + use=vt100-am, + +# Most of the `vt100' emulators out there actually emulate a vt102 +# This entry (or vt102-nsgr) is probably the right thing to use for +# these. +vt102|dec vt102, + mir, + dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100, +vt102-w|dec vt102 in wide mode, + cols#132, + rs3=\E[?3h, use=vt102, + +# Many brain-dead PC comm programs that pretend to be `vt100-compatible' +# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> +# string in the canonical vt100 entry above leaves the screen littered +# with little snowflake or star characters (IBM PC ROM character \017 = ^O) +# after highlight turnoffs. This entry should fix that, and even leave +# ACS support working, at the cost of making multiple-highlight changes +# slightly more expensive. +# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 +vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), + sgr@, sgr0=\E[m, + use=vt102, + +# VT125 Graphics CRT. Clear screen also erases graphics +vt125|vt125 graphics terminal, + clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, + +# This isn't a DEC entry, it came from University of Wisconsin. +# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) +vt131|dec vt131, + am, xenl, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C$<2/>, + cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, + ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, + rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, + rmul=\E[m$<2/>, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2/>, smul=\E[4m$<2/>, + +# vt132 - like vt100 but slower and has ins/del line and such. +# I'm told that <smir>/<rmir> are backwards in the terminal from the +# manual and from the ANSI standard, this describes the actual +# terminal. I've never actually used a vt132 myself, so this +# is untested. +# +vt132|DEC vt132, + xenl, + dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, + ip=$<7>, rmir=\E[4h, smir=\E[4l, + use=vt100, + +# This vt220 description maps F5--F9 to the second block of function keys +# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict +# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. +# PF1--PF4 are used as F1--F4. +# +vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, + clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, + kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, + kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, + rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, + ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmso=\E[27m, rmul=\E[24m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, + +# A much better description of the VT200/220; used to be vt220-8 +vt220|vt200|dec vt220, + am, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, if=/usr/share/tabset/vt100, + il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, + kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, + kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, + mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, +vt220-w|vt200-w|DEC vt220 in wide mode, + cols#132, + rs3=\E[?3h, use=vt220, +vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, + am, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, + csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, + cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, + cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, + dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, + ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, + flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, + ich=\233%p1%d@, if=/usr/share/tabset/vt100, + il=\233%p1%dL, il1=\233L, ind=\ED, + is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, + kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, + kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, + kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, + kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, + kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, + kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, + knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, + lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, + nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, + rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l, + sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h, + smso=\2337m, smul=\2334m, tbc=\2333g, + +# +# vt220d: +# This vt220 description regards F6--F10 as the second block of function keys +# at the top of the keyboard. This mapping follows the description given +# in the VT220 Programmer Reference Manual and agrees with the labeling +# on some terminals that emulate the vt220. There is no support for an F5. +# See vt220 for an alternate mapping. +# +vt220d|DEC VT220 in vt100 mode with DEC function key labeling, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + use=vt220-old, + +vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, + am@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, + +# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko +# (not an official DEC entry!) +# The problem with real vt220 terminals is they don't send escapes when in +# in vt220 mode. This can be gotten around two ways. 1> don't send +# escapes or 2> put the vt220 into vt100 mode and use all the nifty +# features of vt100 advanced video which it then has. +# +# This entry takes the view of putting a vt220 into vt100 mode so +# you can use the escape key in emacs and everything else which needs it. +# +# You probably don't want to use this on a VMS machine since VMS will think +# it has a vt220 and will get fouled up coming out of emacs +# +# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 +# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) +vt200-js|vt220-js|dec vt200 series with jump scroll, + am, + cols#80, + bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il1=\E[L, ind=\ED, + is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, + rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, + + +# This was DEC's vt320. Use the purpose-built one below instead +#vt320|DEC VT320 in vt100 emulation mode, +# use=vt220, + +# +# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. +# +vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, + am@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, + +# These entries are not DEC's official ones, they were purpose-built for the +# VT320. Here are the designer's notes: +# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to +# 'Erase to End of Field'... since nothing seems to use 'end' anyways... +# khome is Home on a PC kbd. Actually 'FIND' on a VT. +# Things that use <knxt> usually use tab anyways... and things that don't use +# tab usually use <knxt> instead... +# kprv is same as tab - Backtab is useless... +# I left out <sgr> because of its RIDICULOUS complexity, +# and the resulting fact that it causes the termcap translation of the entry +# to SMASH the 1k-barrier... +# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 +# (vt320: uncommented <fsl>, comnmmented out <kslt> to avoid a conflict --esr) +vt320|vt300|dec vt320 7 bit terminal, + am, eslok, hs, mir, msgr, xenl, + cols#80, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, + il1=\E[L, ind=\ED, + is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~, + kprv=\E[Z, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, rc=\E8, + rev=\E[7m, rf=/usr/share/tabset/vt300, ri=\EM, + rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, + rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[1$}\E[H\E[K, +vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, + am@, + is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + use=vt320, +# We have to init 132-col mode, not 80-col mode. +vt320-w|vt300-w|dec vt320 wide 7 bit terminal, + cols#132, wsl#132, + is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + use=vt320, +vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, + am@, + is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + use=vt320-w, + +# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals +# which are pretty much a superset of the VT320. They have the +# host writable status line, yet another different DRCS matrix size, +# and such, but they add the DEC Technical character set, Multiple text +# pages, selectable length pages, and the like. The difference between +# the vt330 and vt340 is that the latter has only 2 planes and a monochrome +# monitor, the former has 4 planes and a color monitor. These terminals +# support VT131 and ANSI block mode, but as with much of these things, +# termcap/terminfo doesn't deal with these features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap or terminfo entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt340: string capability "sb=\E[M" corrected to "sr"; +# also, added <rmam>/<smam> based on the init string -- esr) +vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, + cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, + flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, + +# DEC doesn't supply a vt400 description, so we add Daniel Glasser's +# (originally written with vt420 as its primary name, and usable for it). +# +# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple +# text pages and long text pages with selectable length of the vt340, along +# with left and right margins, rectangular area text copy, fill, and erase +# operations, selected region character attribute change operations, +# page memory and rectangle checksums, insert/delete column, reception +# macros, and other features too numerous to remember right now. TERMCAP +# can only take advantage of a few of these added features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; +# also, added <rmam>/<smam> based on the init string -- esr) +vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, + el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m, + smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[2$~\E[1$}\E[1;%dH, + +# (vt420: I removed <kf0>, it collided with <kf10>. I also restored +# a missing <sc> -- esr) +vt420|DEC VT420, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, + kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smkx=\E=, smso=\E[7m, smul=\E[4m, + +# +# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) +# takes two parameters, the key and the string. Translating the key is +# straightforward (keys 1-5 are not defined on real terminals, though some +# emulators define these): +# +# if (key < 16) then value = key; +# else if (key < 21) then value = key + 1; +# else if (key < 25) then value = key + 2; +# else if (key < 27) then value = key + 3; +# else if (key < 30) then value = key + 4; +# else value = key + 5; +# +# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". +# There's no provision in terminfo for emitting a string in this format, so the +# application has to know it. +# +vt420pc|DEC VT420 w/PC keyboard, + kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, + kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, + kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, + kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, + kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, + kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, + kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, + kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, + kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, + kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, + kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, + kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[H, + pctrm=USR_TERM\:vt420pcdos\:, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420, + +vt420pcdos|DEC VT420 w/PC for DOS Merge, + lines#25, + dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;, + pctrm@, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, + sgr0=\E[m, smsc=\E[?1;2r\E[34h, + use=vt420pc, + +vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, + kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, + use=vt420, + +vt510|DEC VT510, + use=vt420, +vt510pc|DEC VT510 w/PC keyboard, + use=vt420pc, +vt510pcdos|DEC VT510 w/PC for DOS Merge, + use=vt420pcdos, + +# VT520/VT525 +# +# The VT520 is a monochrome text terminal capable of managing up to +# four independent sessions in the terminal. It has multiple ANSI +# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) +# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, +# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. +# +# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or +# [Alt]/[Print Screen] depending upon which keyboard and which +# terminal mode is being used. If Set-Up has been disabled or +# assigned to an unknown key, Set-Up may be entered by pressing +# [F3] as the first key after power up, regardless of keyboard type. +# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr) +vt520|DEC VT520, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, + kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, + rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, + +# (vt525: I added <rmam>/<smam> based on the init string; +# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr) +vt525|DEC VT525, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, + kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, + rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, |