From c813b21216cffa615008a0a9c32dcf9dbcc5fb6c Mon Sep 17 00:00:00 2001
From: cliechti <cliechti@f19166aa-fa4f-0410-85c2-fa1106f25c8a>
Date: Tue, 4 Jun 2002 21:12:10 +0000
Subject: added unittests (with loopback HW) added port scanner to find
 available serial ports

---
 pyserial/examples/scan.py | 20 +++++++++++
 pyserial/examples/test.py | 84 +++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+)
 create mode 100644 pyserial/examples/scan.py
 create mode 100644 pyserial/examples/test.py

diff --git a/pyserial/examples/scan.py b/pyserial/examples/scan.py
new file mode 100644
index 0000000..8be17f7
--- /dev/null
+++ b/pyserial/examples/scan.py
@@ -0,0 +1,20 @@
+#!/usr/bin/env python
+from serial import Serial
+from serial.serialutil import SerialException
+
+def scan():
+    """scan for available ports. return a list of tuples (num, name)"""
+    available = []
+    for i in range(256):
+        try:
+            s = Serial(i)
+            available.append( (i, s.portstr))
+            s.close()   #explicit close 'cause of delayed GC in java
+        except SerialException:
+            pass
+    return available
+
+if __name__=='__main__':
+    print "Found ports:"
+    for n,s in scan():
+        print "(%d) %s" % (n,s)
\ No newline at end of file
diff --git a/pyserial/examples/test.py b/pyserial/examples/test.py
new file mode 100644
index 0000000..0c85ba0
--- /dev/null
+++ b/pyserial/examples/test.py
@@ -0,0 +1,84 @@
+#!/usr/bin/env python
+import unittest
+import serial, time
+
+#of which port should the tests be performed:
+PORT=0
+
+#for all these tests a simple hardware is requires.
+#Loopback adapter:
+#shortcut these pin pairs on a 9 pole DSUB: (2-3) (4-6) (7-8)
+#
+# TX  -\
+# RX  -/
+#
+# RTS -\
+# CTS -/
+#
+# DTR -\
+# DSR -/
+#
+# GND
+# RI
+#
+
+class TestNonblocking(unittest.TestCase):
+    """Test with timeouts"""
+    timeout=0
+    def setUp(self):
+        self.s = serial.Serial(PORT,timeout=self.timeout)
+    def tearDown(self):
+        self.s.close()
+
+    def test1_ReadEmpty(self):
+        """After port open, the input buffer must be empty"""
+        self.failUnless(self.s.read(1)=='', "expected empty buffer")
+    def test2_Loopback(self):
+        """With the Loopback HW, heach sent character should return"""
+        for c in map(chr,range(256)):
+            self.s.write(c)
+            time.sleep(0.02)    #there migh be a small delay until the character is ready
+            self.failUnless(self.s.read(1)==c, "expected an '%s' which was written before" % c)
+        self.failUnless(self.s.read(1)=='', "expected empty buffer after all sent chars are read")
+    def test2_LoopbackTimeout(self):
+        """test the timeout/immediate return, and that partial results are returned"""
+        self.s.write("HELLO")
+        time.sleep(0.02)    #there migh be a small delay until the character is ready
+        #read more characters as are available to run in the timeout
+        self.failUnless(self.s.read(10)=='HELLO', "expected an 'HELLO' wich was written before")
+        self.failUnless(self.s.read(1)=='', "expected empty buffer after all sent chars are read")
+
+
+class TestTimeout(TestNonblocking):
+    """Same tests as the NonBlocking ones but this time with timeout"""
+    timeout=1
+
+class TestForever(unittest.TestCase):
+    """Tests for a posrt with no timeout"""
+
+
+class TestDataWires(unittest.TestCase):
+    """Test modem control lines"""
+    def setUp(self):
+        self.s = serial.Serial(PORT)
+    def tearDown(self):
+        self.s.close()
+
+    def test1_RTS(self):
+        self.s.setRTS(0)
+        self.failUnless(self.s.getCTS()==0, "CTS -> 0")
+        self.s.setRTS(1)
+        self.failUnless(self.s.getCTS()==0, "CTS -> 1")
+
+    def test2_DTR(self):
+        self.s.setDTR(0)
+        self.failUnless(self.s.getDSR()==0, "DSR -> 0")
+        self.s.setDTR(1)
+        self.failUnless(self.s.getDSR()==0, "DSR -> 1")
+
+##    def test3_RI(self):
+##        self.failUnless(self.s.getRI()==0, "RI -> 0")
+
+if __name__ == '__main__':
+    # When this module is executed from the command-line, run all its tests
+    unittest.main()
-- 
cgit v1.2.1