#
# This file is part of pysnmp software.
#
# Copyright (c) 2005-2019, Ilya Etingof <etingof@gmail.com>
# License: http://snmplabs.com/pysnmp/license.html
#
# ASN.1 source http://mibs.snmplabs.com:80/asn1/SNMP-TARGET-MIB
# Produced by pysmi-0.4.0 at Sat Feb 16 12:25:20 2019
#
# Parts of otherwise autogenerated MIB has been updated manually.
#

if 'mibBuilder' not in globals():
    import sys

    sys.stderr.write(__doc__)
    sys.exit(1)

(Integer,
 OctetString,
 ObjectIdentifier) = mibBuilder.importSymbols(
    "ASN1",
    "Integer",
    "OctetString",
    "ObjectIdentifier")

(NamedValues,) = mibBuilder.importSymbols(
    "ASN1-ENUMERATION",
    "NamedValues")

(ConstraintsIntersection,
 SingleValueConstraint,
 ValueRangeConstraint,
 ValueSizeConstraint,
 ConstraintsUnion) = mibBuilder.importSymbols(
    "ASN1-REFINEMENT",
    "ConstraintsIntersection",
    "SingleValueConstraint",
    "ValueRangeConstraint",
    "ValueSizeConstraint",
    "ConstraintsUnion")

(SnmpMessageProcessingModel,
 SnmpSecurityLevel,
 SnmpAdminString,
 SnmpSecurityModel) = mibBuilder.importSymbols(
    "SNMP-FRAMEWORK-MIB",
    "SnmpMessageProcessingModel",
    "SnmpSecurityLevel",
    "SnmpAdminString",
    "SnmpSecurityModel")

(ObjectGroup,
 ModuleCompliance,
 NotificationGroup) = mibBuilder.importSymbols(
    "SNMPv2-CONF",
    "ObjectGroup",
    "ModuleCompliance",
    "NotificationGroup")

(iso,
 TimeTicks,
 Gauge32,
 ObjectIdentity,
 snmpModules,
 MibScalar,
 MibTable,
 MibTableRow,
 MibTableColumn,
 Bits,
 MibIdentifier,
 IpAddress,
 NotificationType,
 Unsigned32,
 Integer32,
 ModuleIdentity,
 Counter64,
 Counter32) = mibBuilder.importSymbols(
    "SNMPv2-SMI",
    "iso",
    "TimeTicks",
    "Gauge32",
    "ObjectIdentity",
    "snmpModules",
    "MibScalar",
    "MibTable",
    "MibTableRow",
    "MibTableColumn",
    "Bits",
    "MibIdentifier",
    "IpAddress",
    "NotificationType",
    "Unsigned32",
    "Integer32",
    "ModuleIdentity",
    "Counter64",
    "Counter32")

(TDomain,
 RowStatus,
 TextualConvention,
 TimeInterval,
 TestAndIncr,
 DisplayString,
 TAddress,
 StorageType) = mibBuilder.importSymbols(
    "SNMPv2-TC",
    "TDomain",
    "RowStatus",
    "TextualConvention",
    "TimeInterval",
    "TestAndIncr",
    "DisplayString",
    "TAddress",
    "StorageType")

snmpTargetMIB = ModuleIdentity(
    (1, 3, 6, 1, 6, 3, 12)
)
snmpTargetMIB.setRevisions(
        ("2002-10-14 00:00",
         "1998-08-04 00:00",
         "1997-07-14 00:00")
)
snmpTargetMIB.setLastUpdated("200210140000Z")
if mibBuilder.loadTexts:
    snmpTargetMIB.setOrganization("""\
IETF SNMPv3 Working Group
""")
snmpTargetMIB.setContactInfo("""\
WG-email: snmpv3@lists.tislabs.com Subscribe: majordomo@lists.tislabs.com In
message body: subscribe snmpv3 Co-Chair: Russ Mundy Network Associates
Laboratories Postal: 15204 Omega Drive, Suite 300 Rockville, MD 20850-4601 USA
EMail: mundy@tislabs.com Phone: +1 301-947-7107 Co-Chair: David Harrington
Enterasys Networks Postal: 35 Industrial Way P. O. Box 5004 Rochester, New
Hampshire 03866-5005 USA EMail: dbh@enterasys.com Phone: +1 603-337-2614 Co-
editor: David B. Levi Nortel Networks Postal: 3505 Kesterwood Drive Knoxville,
Tennessee 37918 EMail: dlevi@nortelnetworks.com Phone: +1 865 686 0432 Co-
editor: Paul Meyer Secure Computing Corporation Postal: 2675 Long Lake Road
Roseville, Minnesota 55113 EMail: paul_meyer@securecomputing.com Phone: +1 651
628 1592 Co-editor: Bob Stewart Retired
""")
if mibBuilder.loadTexts:
    snmpTargetMIB.setDescription("""\
This MIB module defines MIB objects which provide mechanisms to remotely
configure the parameters used by an SNMP entity for the generation of SNMP
messages. Copyright (C) The Internet Society (2002). This version of this MIB
module is part of RFC 3413; see the RFC itself for full legal notices.
""")


class SnmpTagList(TextualConvention, OctetString):
    status = "current"
    displayHint = "255t"
    subtypeSpec = OctetString.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueSizeConstraint(0, 255),
    )

    if mibBuilder.loadTexts:
        description = """\
An octet string containing a list of tag values. Tag values are preferably in
human-readable form. To facilitate internationalization, this information is
represented using the ISO/IEC IS 10646-1 character set, encoded as an octet
string using the UTF-8 character encoding scheme described in RFC 2279. Since
additional code points are added by amendments to the 10646 standard from time
to time, implementations must be prepared to encounter any code point from
0x00000000 to 0x7fffffff. The use of control codes should be avoided, except as
described below. For code points not directly supported by user interface
hardware or software, an alternative means of entry and display, such as
hexadecimal, may be provided. For information encoded in 7-bit US-ASCII, the
UTF-8 representation is identical to the US-ASCII encoding. An object of this
type contains a list of tag values which are used to select a set of entries in
a table. A tag value is an arbitrary string of octets, but may not contain a
delimiter character. Delimiter characters are defined to be one of the
following: - An ASCII space character (0x20). - An ASCII TAB character (0x09).
- An ASCII carriage return (CR) character (0x0D). - An ASCII line feed (LF)
character (0x0A). Delimiter characters are used to separate tag values in a tag
list. Only a single delimiter character may occur between two tag values. A tag
value may not have a zero length. These constraints imply certain restrictions
on the contents of this object: - There cannot be a leading or trailing
delimiter character. - There cannot be multiple adjacent delimiter characters.
Some examples of valid tag lists are: - '' -- an empty list - 'acme' -- list of
one tag - 'host router bridge' -- list of several tags Note that although a tag
value may not have a length of zero, an empty string is still valid. This
indicates an empty list (i.e. there are no tag values in the list). The use of
the tag list to select table entries is application and MIB specific.
Typically, an application will provide one or more tag values, and any entry
which contains some combination of these tag values will be selected.
"""
    encoding = 'utf-8'

    DELIMITERS = (' ', '\n', '\t', '\t')

    def prettyIn(self, value):
        inDelim = True

        for v in str(value):
            if v in self.DELIMITERS:
                if inDelim:
                    raise error.SmiError('Leading or multiple delimiters not '
                                         'allowed in tag list %r' % value)
                inDelim = True

            else:
                inDelim = False

        if value and inDelim:
            raise error.SmiError('Dangling delimiter not allowed in '
                                 'tag list %r' % value)

        return OctetString.prettyIn(self, value)


class SnmpTagValue(TextualConvention, OctetString):
    status = "current"
    displayHint = "255t"
    subtypeSpec = OctetString.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueSizeConstraint(0, 255),
    )

    if mibBuilder.loadTexts:
        description = """\
An octet string containing a tag value. Tag values are preferably in human-
readable form. To facilitate internationalization, this information is
represented using the ISO/IEC IS 10646-1 character set, encoded as an octet
string using the UTF-8 character encoding scheme described in RFC 2279. Since
additional code points are added by amendments to the 10646 standard from time
to time, implementations must be prepared to encounter any code point from
0x00000000 to 0x7fffffff. The use of control codes should be avoided, and
certain control codes are not allowed as described below. For code points not
directly supported by user interface hardware or software, an alternative means
of entry and display, such as hexadecimal, may be provided. For information
encoded in 7-bit US-ASCII, the UTF-8 representation is identical to the US-
ASCII encoding. Note that when this TC is used for an object that is used or
envisioned to be used as an index, then a SIZE restriction must be specified so
that the number of sub-identifiers for any object instance does not exceed the
limit of 128, as defined by [RFC1905]. An object of this type contains a single
tag value which is used to select a set of entries in a table. A tag value is
an arbitrary string of octets, but may not contain a delimiter character.
Delimiter characters are defined to be one of the following: - An ASCII space
character (0x20). - An ASCII TAB character (0x09). - An ASCII carriage return
(CR) character (0x0D). - An ASCII line feed (LF) character (0x0A). Delimiter
characters are used to separate tag values in a tag list. An object of this
type may only contain a single tag value, and so delimiter characters are not
allowed in a value of this type. Note that a tag value of 0 length means that
no tag is defined. In other words, a tag value of 0 length would never match
anything in a tag list, and would never select any table entries. Some examples
of valid tag values are: - 'acme' - 'router' - 'host' The use of a tag value to
select table entries is application and MIB specific.
"""
    encoding = 'utf-8'
    DELIMITERS = (' ', '\n', '\t', '\t')

    def prettyIn(self, value):
        for v in str(value):
            if v in self.DELIMITERS:
                raise error.SmiError('Delimiters not allowed in tag value')

        return OctetString.prettyIn(self, value)


_SnmpTargetObjects_ObjectIdentity = ObjectIdentity
snmpTargetObjects = _SnmpTargetObjects_ObjectIdentity(
    (1, 3, 6, 1, 6, 3, 12, 1)
)
_SnmpTargetSpinLock_Type = TestAndIncr
_SnmpTargetSpinLock_Object = MibScalar
snmpTargetSpinLock = _SnmpTargetSpinLock_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 1),
    _SnmpTargetSpinLock_Type()
)
snmpTargetSpinLock.setMaxAccess("read-write")
if mibBuilder.loadTexts:
    snmpTargetSpinLock.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetSpinLock.setDescription("""\
This object is used to facilitate modification of table entries in the SNMP-
TARGET-MIB module by multiple managers. In particular, it is useful when
modifying the value of the snmpTargetAddrTagList object. The procedure for
modifying the snmpTargetAddrTagList object is as follows: 1. Retrieve the value
of snmpTargetSpinLock and of snmpTargetAddrTagList. 2. Generate a new value for
snmpTargetAddrTagList. 3. Set the value of snmpTargetSpinLock to the retrieved
value, and the value of snmpTargetAddrTagList to the new value. If the set
fails for the snmpTargetSpinLock object, go back to step 1.
""")
_SnmpTargetAddrTable_Object = MibTable
snmpTargetAddrTable = _SnmpTargetAddrTable_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2)
)
if mibBuilder.loadTexts:
    snmpTargetAddrTable.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrTable.setDescription("""\
A table of transport addresses to be used in the generation of SNMP messages.
""")
_SnmpTargetAddrEntry_Object = MibTableRow
snmpTargetAddrEntry = _SnmpTargetAddrEntry_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1)
)
snmpTargetAddrEntry.setIndexNames(
    (1, "SNMP-TARGET-MIB", "snmpTargetAddrName"),
)
if mibBuilder.loadTexts:
    snmpTargetAddrEntry.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrEntry.setDescription("""\
A transport address to be used in the generation of SNMP operations. Entries in
the snmpTargetAddrTable are created and deleted using the
snmpTargetAddrRowStatus object.
""")


class _SnmpTargetAddrName_Type(SnmpAdminString):
    """Custom type snmpTargetAddrName based on SnmpAdminString"""
    subtypeSpec = SnmpAdminString.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueSizeConstraint(1, 32),
    )


_SnmpTargetAddrName_Type.__name__ = "SnmpAdminString"
_SnmpTargetAddrName_Object = MibTableColumn
snmpTargetAddrName = _SnmpTargetAddrName_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 1),
    _SnmpTargetAddrName_Type()
)
snmpTargetAddrName.setMaxAccess("not-accessible")
if mibBuilder.loadTexts:
    snmpTargetAddrName.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrName.setDescription("""\
The locally arbitrary, but unique identifier associated with this
snmpTargetAddrEntry.
""")
_SnmpTargetAddrTDomain_Type = TDomain
_SnmpTargetAddrTDomain_Object = MibTableColumn
snmpTargetAddrTDomain = _SnmpTargetAddrTDomain_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 2),
    _SnmpTargetAddrTDomain_Type()
)
snmpTargetAddrTDomain.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrTDomain.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrTDomain.setDescription("""\
This object indicates the transport type of the address contained in the
snmpTargetAddrTAddress object.
""")
_SnmpTargetAddrTAddress_Type = TAddress
_SnmpTargetAddrTAddress_Object = MibTableColumn
snmpTargetAddrTAddress = _SnmpTargetAddrTAddress_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 3),
    _SnmpTargetAddrTAddress_Type()
)
snmpTargetAddrTAddress.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrTAddress.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrTAddress.setDescription("""\
This object contains a transport address. The format of this address depends on
the value of the snmpTargetAddrTDomain object.
""")


class _SnmpTargetAddrTimeout_Type(TimeInterval):
    """Custom type snmpTargetAddrTimeout based on TimeInterval"""
    defaultValue = 1500


_SnmpTargetAddrTimeout_Object = MibTableColumn
snmpTargetAddrTimeout = _SnmpTargetAddrTimeout_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 4),
    _SnmpTargetAddrTimeout_Type()
)
snmpTargetAddrTimeout.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrTimeout.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrTimeout.setDescription("""\
This object should reflect the expected maximum round trip time for
communicating with the transport address defined by this row. When a message is
sent to this address, and a response (if one is expected) is not received
within this time period, an implementation may assume that the response will
not be delivered. Note that the time interval that an application waits for a
response may actually be derived from the value of this object. The method for
deriving the actual time interval is implementation dependent. One such method
is to derive the expected round trip time based on a particular retransmission
algorithm and on the number of timeouts which have occurred. The type of
message may also be considered when deriving expected round trip times for
retransmissions. For example, if a message is being sent with a securityLevel
that indicates both authentication and privacy, the derived value may be
increased to compensate for extra processing time spent during authentication
and encryption processing.
""")


class _SnmpTargetAddrRetryCount_Type(Integer32):
    """Custom type snmpTargetAddrRetryCount based on Integer32"""
    defaultValue = 3

    subtypeSpec = Integer32.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueRangeConstraint(0, 255),
    )


_SnmpTargetAddrRetryCount_Type.__name__ = "Integer32"
_SnmpTargetAddrRetryCount_Object = MibTableColumn
snmpTargetAddrRetryCount = _SnmpTargetAddrRetryCount_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 5),
    _SnmpTargetAddrRetryCount_Type()
)
snmpTargetAddrRetryCount.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrRetryCount.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrRetryCount.setDescription("""\
This object specifies a default number of retries to be attempted when a
response is not received for a generated message. An application may provide
its own retry count, in which case the value of this object is ignored.
""")
_SnmpTargetAddrTagList_Type = SnmpTagList
_SnmpTargetAddrTagList_Object = MibTableColumn
snmpTargetAddrTagList = _SnmpTargetAddrTagList_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 6),
    _SnmpTargetAddrTagList_Type()
)
snmpTargetAddrTagList.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrTagList.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrTagList.setDescription("""\
This object contains a list of tag values which are used to select target
addresses for a particular operation.
""")


class _SnmpTargetAddrParams_Type(SnmpAdminString):
    """Custom type snmpTargetAddrParams based on SnmpAdminString"""
    subtypeSpec = SnmpAdminString.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueSizeConstraint(1, 32),
    )


_SnmpTargetAddrParams_Type.__name__ = "SnmpAdminString"
_SnmpTargetAddrParams_Object = MibTableColumn
snmpTargetAddrParams = _SnmpTargetAddrParams_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 7),
    _SnmpTargetAddrParams_Type()
)
snmpTargetAddrParams.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrParams.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrParams.setDescription("""\
The value of this object identifies an entry in the snmpTargetParamsTable. The
identified entry contains SNMP parameters to be used when generating messages
to be sent to this transport address.
""")


class _SnmpTargetAddrStorageType_Type(StorageType):
    """Custom type snmpTargetAddrStorageType based on StorageType"""


_SnmpTargetAddrStorageType_Object = MibTableColumn
snmpTargetAddrStorageType = _SnmpTargetAddrStorageType_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 8),
    _SnmpTargetAddrStorageType_Type().clone('nonVolatile')
)
snmpTargetAddrStorageType.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrStorageType.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrStorageType.setDescription("""\
The storage type for this conceptual row. Conceptual rows having the value
'permanent' need not allow write-access to any columnar objects in the row.
""")
_SnmpTargetAddrRowStatus_Type = RowStatus
_SnmpTargetAddrRowStatus_Object = MibTableColumn
snmpTargetAddrRowStatus = _SnmpTargetAddrRowStatus_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 2, 1, 9),
    _SnmpTargetAddrRowStatus_Type()
)
snmpTargetAddrRowStatus.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetAddrRowStatus.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetAddrRowStatus.setDescription("""\
The status of this conceptual row. To create a row in this table, a manager
must set this object to either createAndGo(4) or createAndWait(5). Until
instances of all corresponding columns are appropriately configured, the value
of the corresponding instance of the snmpTargetAddrRowStatus column is
'notReady'. In particular, a newly created row cannot be made active until the
corresponding instances of snmpTargetAddrTDomain, snmpTargetAddrTAddress, and
snmpTargetAddrParams have all been set. The following objects may not be
modified while the value of this object is active(1): - snmpTargetAddrTDomain -
snmpTargetAddrTAddress An attempt to set these objects while the value of
snmpTargetAddrRowStatus is active(1) will result in an inconsistentValue error.
""")
_SnmpTargetParamsTable_Object = MibTable
snmpTargetParamsTable = _SnmpTargetParamsTable_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3)
)
if mibBuilder.loadTexts:
    snmpTargetParamsTable.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsTable.setDescription("""\
A table of SNMP target information to be used in the generation of SNMP
messages.
""")
_SnmpTargetParamsEntry_Object = MibTableRow
snmpTargetParamsEntry = _SnmpTargetParamsEntry_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1)
)
snmpTargetParamsEntry.setIndexNames(
    (1, "SNMP-TARGET-MIB", "snmpTargetParamsName"),
)
if mibBuilder.loadTexts:
    snmpTargetParamsEntry.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsEntry.setDescription("""\
A set of SNMP target information. Entries in the snmpTargetParamsTable are
created and deleted using the snmpTargetParamsRowStatus object.
""")


class _SnmpTargetParamsName_Type(SnmpAdminString):
    """Custom type snmpTargetParamsName based on SnmpAdminString"""
    subtypeSpec = SnmpAdminString.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueSizeConstraint(1, 32),
    )


_SnmpTargetParamsName_Type.__name__ = "SnmpAdminString"
_SnmpTargetParamsName_Object = MibTableColumn
snmpTargetParamsName = _SnmpTargetParamsName_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 1),
    _SnmpTargetParamsName_Type()
)
snmpTargetParamsName.setMaxAccess("not-accessible")
if mibBuilder.loadTexts:
    snmpTargetParamsName.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsName.setDescription("""\
The locally arbitrary, but unique identifier associated with this
snmpTargetParamsEntry.
""")
_SnmpTargetParamsMPModel_Type = SnmpMessageProcessingModel
_SnmpTargetParamsMPModel_Object = MibTableColumn
snmpTargetParamsMPModel = _SnmpTargetParamsMPModel_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 2),
    _SnmpTargetParamsMPModel_Type()
)
snmpTargetParamsMPModel.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsMPModel.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsMPModel.setDescription("""\
The Message Processing Model to be used when generating SNMP messages using
this entry.
""")


class _SnmpTargetParamsSecurityModel_Type(SnmpSecurityModel):
    """Custom type snmpTargetParamsSecurityModel based on SnmpSecurityModel"""
    subtypeSpec = SnmpSecurityModel.subtypeSpec
    subtypeSpec += ConstraintsUnion(
        ValueRangeConstraint(1, 2147483647),
    )


_SnmpTargetParamsSecurityModel_Type.__name__ = "SnmpSecurityModel"
_SnmpTargetParamsSecurityModel_Object = MibTableColumn
snmpTargetParamsSecurityModel = _SnmpTargetParamsSecurityModel_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 3),
    _SnmpTargetParamsSecurityModel_Type()
)
snmpTargetParamsSecurityModel.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityModel.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityModel.setDescription("""\
The Security Model to be used when generating SNMP messages using this entry.
An implementation may choose to return an inconsistentValue error if an attempt
is made to set this variable to a value for a security model which the
implementation does not support.
""")
_SnmpTargetParamsSecurityName_Type = SnmpAdminString
_SnmpTargetParamsSecurityName_Object = MibTableColumn
snmpTargetParamsSecurityName = _SnmpTargetParamsSecurityName_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 4),
    _SnmpTargetParamsSecurityName_Type()
)
snmpTargetParamsSecurityName.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityName.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityName.setDescription("""\
The securityName which identifies the Principal on whose behalf SNMP messages
will be generated using this entry.
""")
_SnmpTargetParamsSecurityLevel_Type = SnmpSecurityLevel
_SnmpTargetParamsSecurityLevel_Object = MibTableColumn
snmpTargetParamsSecurityLevel = _SnmpTargetParamsSecurityLevel_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 5),
    _SnmpTargetParamsSecurityLevel_Type()
)
snmpTargetParamsSecurityLevel.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityLevel.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsSecurityLevel.setDescription("""\
The Level of Security to be used when generating SNMP messages using this
entry.
""")


class _SnmpTargetParamsStorageType_Type(StorageType):
    """Custom type snmpTargetParamsStorageType based on StorageType"""


_SnmpTargetParamsStorageType_Object = MibTableColumn
snmpTargetParamsStorageType = _SnmpTargetParamsStorageType_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 6),
    _SnmpTargetParamsStorageType_Type().clone('nonVolatile')
)
snmpTargetParamsStorageType.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsStorageType.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsStorageType.setDescription("""\
The storage type for this conceptual row. Conceptual rows having the value
'permanent' need not allow write-access to any columnar objects in the row.
""")
_SnmpTargetParamsRowStatus_Type = RowStatus
_SnmpTargetParamsRowStatus_Object = MibTableColumn
snmpTargetParamsRowStatus = _SnmpTargetParamsRowStatus_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 3, 1, 7),
    _SnmpTargetParamsRowStatus_Type()
)
snmpTargetParamsRowStatus.setMaxAccess("read-create")
if mibBuilder.loadTexts:
    snmpTargetParamsRowStatus.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetParamsRowStatus.setDescription("""\
The status of this conceptual row. To create a row in this table, a manager
must set this object to either createAndGo(4) or createAndWait(5). Until
instances of all corresponding columns are appropriately configured, the value
of the corresponding instance of the snmpTargetParamsRowStatus column is
'notReady'. In particular, a newly created row cannot be made active until the
corresponding snmpTargetParamsMPModel, snmpTargetParamsSecurityModel,
snmpTargetParamsSecurityName, and snmpTargetParamsSecurityLevel have all been
set. The following objects may not be modified while the value of this object
is active(1): - snmpTargetParamsMPModel - snmpTargetParamsSecurityModel -
snmpTargetParamsSecurityName - snmpTargetParamsSecurityLevel An attempt to set
these objects while the value of snmpTargetParamsRowStatus is active(1) will
result in an inconsistentValue error.
""")
_SnmpUnavailableContexts_Type = Counter32
_SnmpUnavailableContexts_Object = MibScalar
snmpUnavailableContexts = _SnmpUnavailableContexts_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 4),
    _SnmpUnavailableContexts_Type()
)
snmpUnavailableContexts.setMaxAccess("read-only")
if mibBuilder.loadTexts:
    snmpUnavailableContexts.setStatus("current")
if mibBuilder.loadTexts:
    snmpUnavailableContexts.setDescription("""\
The total number of packets received by the SNMP engine which were dropped
because the context contained in the message was unavailable.
""")
_SnmpUnknownContexts_Type = Counter32
_SnmpUnknownContexts_Object = MibScalar
snmpUnknownContexts = _SnmpUnknownContexts_Object(
    (1, 3, 6, 1, 6, 3, 12, 1, 5),
    _SnmpUnknownContexts_Type()
)
snmpUnknownContexts.setMaxAccess("read-only")
if mibBuilder.loadTexts:
    snmpUnknownContexts.setStatus("current")
if mibBuilder.loadTexts:
    snmpUnknownContexts.setDescription("""\
The total number of packets received by the SNMP engine which were dropped
because the context contained in the message was unknown.
""")
_SnmpTargetConformance_ObjectIdentity = ObjectIdentity
snmpTargetConformance = _SnmpTargetConformance_ObjectIdentity(
    (1, 3, 6, 1, 6, 3, 12, 3)
)
_SnmpTargetCompliances_ObjectIdentity = ObjectIdentity
snmpTargetCompliances = _SnmpTargetCompliances_ObjectIdentity(
    (1, 3, 6, 1, 6, 3, 12, 3, 1)
)
_SnmpTargetGroups_ObjectIdentity = ObjectIdentity
snmpTargetGroups = _SnmpTargetGroups_ObjectIdentity(
    (1, 3, 6, 1, 6, 3, 12, 3, 2)
)

snmpTargetBasicGroup = ObjectGroup(
    (1, 3, 6, 1, 6, 3, 12, 3, 2, 1)
)
snmpTargetBasicGroup.setObjects(
      *(("SNMP-TARGET-MIB", "snmpTargetSpinLock"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrTDomain"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrTAddress"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrTagList"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrParams"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrStorageType"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrRowStatus"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsMPModel"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsSecurityModel"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsSecurityName"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsSecurityLevel"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsStorageType"),
        ("SNMP-TARGET-MIB", "snmpTargetParamsRowStatus"))
)
if mibBuilder.loadTexts:
    snmpTargetBasicGroup.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetBasicGroup.setDescription("""\
A collection of objects providing basic remote configuration of management
targets.
""")

snmpTargetResponseGroup = ObjectGroup(
    (1, 3, 6, 1, 6, 3, 12, 3, 2, 2)
)
snmpTargetResponseGroup.setObjects(
      *(("SNMP-TARGET-MIB", "snmpTargetAddrTimeout"),
        ("SNMP-TARGET-MIB", "snmpTargetAddrRetryCount"))
)
if mibBuilder.loadTexts:
    snmpTargetResponseGroup.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetResponseGroup.setDescription("""\
A collection of objects providing remote configuration of management targets
for applications which generate SNMP messages for which a response message
would be expected.
""")

snmpTargetCommandResponderGroup = ObjectGroup(
    (1, 3, 6, 1, 6, 3, 12, 3, 2, 3)
)
snmpTargetCommandResponderGroup.setObjects(
      *(("SNMP-TARGET-MIB", "snmpUnavailableContexts"),
        ("SNMP-TARGET-MIB", "snmpUnknownContexts"))
)
if mibBuilder.loadTexts:
    snmpTargetCommandResponderGroup.setStatus("current")
if mibBuilder.loadTexts:
    snmpTargetCommandResponderGroup.setDescription("""\
A collection of objects required for command responder applications, used for
counting error conditions.
""")

snmpTargetCommandResponderCompliance = ModuleCompliance(
    (1, 3, 6, 1, 6, 3, 12, 3, 1, 1)
)
if mibBuilder.loadTexts:
    snmpTargetCommandResponderCompliance.setStatus(
        "current"
    )
if mibBuilder.loadTexts:
    snmpTargetCommandResponderCompliance.setDescription("""\
The compliance statement for SNMP entities which include a command responder
application.
""")

mibBuilder.exportSymbols(
    "SNMP-TARGET-MIB",
    **{"SnmpTagValue": SnmpTagValue,
       "SnmpTagList": SnmpTagList,
       "snmpTargetMIB": snmpTargetMIB,
       "snmpTargetObjects": snmpTargetObjects,
       "snmpTargetSpinLock": snmpTargetSpinLock,
       "snmpTargetAddrTable": snmpTargetAddrTable,
       "snmpTargetAddrEntry": snmpTargetAddrEntry,
       "snmpTargetAddrName": snmpTargetAddrName,
       "snmpTargetAddrTDomain": snmpTargetAddrTDomain,
       "snmpTargetAddrTAddress": snmpTargetAddrTAddress,
       "snmpTargetAddrTimeout": snmpTargetAddrTimeout,
       "snmpTargetAddrRetryCount": snmpTargetAddrRetryCount,
       "snmpTargetAddrTagList": snmpTargetAddrTagList,
       "snmpTargetAddrParams": snmpTargetAddrParams,
       "snmpTargetAddrStorageType": snmpTargetAddrStorageType,
       "snmpTargetAddrRowStatus": snmpTargetAddrRowStatus,
       "snmpTargetParamsTable": snmpTargetParamsTable,
       "snmpTargetParamsEntry": snmpTargetParamsEntry,
       "snmpTargetParamsName": snmpTargetParamsName,
       "snmpTargetParamsMPModel": snmpTargetParamsMPModel,
       "snmpTargetParamsSecurityModel": snmpTargetParamsSecurityModel,
       "snmpTargetParamsSecurityName": snmpTargetParamsSecurityName,
       "snmpTargetParamsSecurityLevel": snmpTargetParamsSecurityLevel,
       "snmpTargetParamsStorageType": snmpTargetParamsStorageType,
       "snmpTargetParamsRowStatus": snmpTargetParamsRowStatus,
       "snmpUnavailableContexts": snmpUnavailableContexts,
       "snmpUnknownContexts": snmpUnknownContexts,
       "snmpTargetConformance": snmpTargetConformance,
       "snmpTargetCompliances": snmpTargetCompliances,
       "snmpTargetCommandResponderCompliance": snmpTargetCommandResponderCompliance,
       "snmpTargetGroups": snmpTargetGroups,
       "snmpTargetBasicGroup": snmpTargetBasicGroup,
       "snmpTargetResponseGroup": snmpTargetResponseGroup,
       "snmpTargetCommandResponderGroup": snmpTargetCommandResponderGroup}
)