From 2f24177c361ba4d9deba2d7378f84aa96111db80 Mon Sep 17 00:00:00 2001
From: elie <elie>
Date: Mon, 14 Sep 2015 05:20:24 +0000
Subject: * synchronous oneliner apps redesigned to offer Python
 generator-based   API along with a more comprehensive set of accepted
 parameters. * massively documented (in Sphinx, NumPy style)

---
 .../cmdgen/getnext-v2c-from-specific-address.py    | 82 ++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 examples/v3arch/asyncore/manager/cmdgen/getnext-v2c-from-specific-address.py

(limited to 'examples/v3arch/asyncore/manager/cmdgen/getnext-v2c-from-specific-address.py')

diff --git a/examples/v3arch/asyncore/manager/cmdgen/getnext-v2c-from-specific-address.py b/examples/v3arch/asyncore/manager/cmdgen/getnext-v2c-from-specific-address.py
new file mode 100644
index 0000000..022742a
--- /dev/null
+++ b/examples/v3arch/asyncore/manager/cmdgen/getnext-v2c-from-specific-address.py
@@ -0,0 +1,82 @@
+"""
+Send packets from specific local interface
+++++++++++++++++++++++++++++++++++++++++++
+
+Send a series of SNMP GETNEXT requests with the following options:
+
+* with SNMPv2c, community 'public'
+* over IPv4/UDP
+* to an Agent at 195.218.195.228:161
+* sending packets from primary local interface 0.0.0.0, local port 61024
+* for two OIDs in tuple form
+* stop on end-of-mib condition for both OIDs
+
+This script performs similar to the following Net-SNMP command:
+
+| $ snmpwalk -v2c -c public -ObentU 195.218.195.228 1.3.6.1.2.1.1 1.3.6.1.4.1.1
+
+"""#
+from pysnmp.entity import engine, config
+from pysnmp.carrier.asyncore.dgram import udp
+from pysnmp.entity.rfc3413 import cmdgen
+
+# Create SNMP engine instance
+snmpEngine = engine.SnmpEngine()
+
+#
+# SNMPv1/2c setup (if you use SNMPv1 or v2c)
+#
+
+# SecurityName <-> CommunityName mapping
+config.addV1System(snmpEngine, 'my-area', 'public')
+
+# Specify security settings per SecurityName (SNMPv1 - 0, SNMPv2c - 1)
+config.addTargetParams(snmpEngine, 'my-creds', 'my-area', 'noAuthNoPriv', 0)
+
+#
+# Setup transport endpoint and bind it with security settings yielding
+# a target name
+#
+
+# UDP/IPv4
+config.addTransport(
+    snmpEngine,
+    udp.domainName,
+    udp.UdpSocketTransport().openClientMode(('0.0.0.0', 61024))
+)
+config.addTargetAddr(
+    snmpEngine, 'my-router',
+    udp.domainName, ('195.218.195.228', 161),
+    'my-creds'
+)
+
+# Error/response receiver
+def cbFun(snmpEngine, sendRequestHandle, errorIndication,
+          errorStatus, errorIndex, varBindTable, cbCtx):
+    if errorIndication:
+        print(errorIndication)
+        return
+    if errorStatus:
+        print('%s at %s' % (
+            errorStatus.prettyPrint(),
+            errorIndex and varBindTable[-1][int(errorIndex)-1][0] or '?'
+            )
+        )
+        return  # stop on error
+    for varBindRow in varBindTable:
+        for oid, val in varBindRow:
+            print('%s = %s' % (oid.prettyPrint(), val.prettyPrint()))
+    return 1 # signal dispatcher to continue
+
+# Prepare initial request to be sent
+cmdgen.NextCommandGenerator().sendVarBinds(
+    snmpEngine,
+    'my-router',
+    None, '',  # contextEngineId, contextName
+    [ ((1,3,6,1,2,1,1), None),
+      ((1,3,6,1,2,1,11), None) ],
+    cbFun
+)
+
+# Run I/O dispatcher which would send pending queries and process responses
+snmpEngine.transportDispatcher.runDispatcher()
-- 
cgit v1.2.1