#
# Command Responder
#
# Listen and respond to SNMP GET/SET/GETNEXT/GETBULK queries with
# the following options:
#
# * SNMPv2c
# * with SNMP community "public"
# * allow access to SNMPv2-MIB objects (1.3.6.1.2.1)
# * over IPv4/UDP, listening at 127.0.0.1:161 and 127.0.0.2:161 interfaces
# 
# Either of the following Net-SNMP's commands will walk this Agent:
#
# $ snmpwalk -v2c -c public 127.0.0.1 .1.3.6
# $ snmpwalk -v2c -c public 127.0.0.2 .1.3.6
#
from pysnmp.entity import engine, config
from pysnmp.entity.rfc3413 import cmdrsp, context
from pysnmp.carrier.asynsock.dgram import udp

# Create SNMP engine with autogenernated engineID and pre-bound
# to socket transport dispatcher
snmpEngine = engine.SnmpEngine()

# Transport setup

# UDP over IPv4 at 127.0.0.1:161
config.addTransport(
    snmpEngine,
    udp.domainName + (1,),
    udp.UdpTransport().openServerMode(('127.0.0.1', 161))
)
# UDP over IPv4 at 127.0.0.2:161
config.addTransport(
    snmpEngine,
    udp.domainName + (2,),
    udp.UdpTransport().openServerMode(('127.0.0.2', 161))
)

# SNMPv2c setup

# SecurityName <-> CommunityName mapping.
config.addV1System(snmpEngine, 'my-area', 'public')

# Allow full MIB access for this user / securityModels at VACM
config.addVacmUser(snmpEngine, 2, 'my-area', 'noAuthNoPriv', (1,3,6,1,2,1), (1,3,6,1,2,1))

# Get default SNMP context this SNMP engine serves
snmpContext = context.SnmpContext(snmpEngine)

# Register SNMP Applications at the SNMP engine for particular SNMP context
cmdrsp.GetCommandResponder(snmpEngine, snmpContext)
cmdrsp.SetCommandResponder(snmpEngine, snmpContext)
cmdrsp.NextCommandResponder(snmpEngine, snmpContext)
cmdrsp.BulkCommandResponder(snmpEngine, snmpContext)

# Register an imaginary never-ending job to keep I/O dispatcher running forever
snmpEngine.transportDispatcher.jobStarted(1)

# Run I/O dispatcher which would receive queries and send responses
try:
    snmpEngine.transportDispatcher.runDispatcher()
except:
    snmpEngine.transportDispatcher.closeDispatcher()
    raise