diff options
Diffstat (limited to 'qpid/cpp/INSTALL')
-rw-r--r-- | qpid/cpp/INSTALL | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/qpid/cpp/INSTALL b/qpid/cpp/INSTALL new file mode 100644 index 0000000000..e7e9af14ca --- /dev/null +++ b/qpid/cpp/INSTALL @@ -0,0 +1,307 @@ + Installing Qpid/C++ + =================== + +Table of Contents +================= +1. Introduction + +2. Prerequisites + 2.1. What to Install + 2.2. How to Install + 2.2.1. Using Package Management Tools + 2.2.2. From Source + - openais + - boost + 2.2.3. autotools + 2.3. Important Environment Variable Settings + +3. Building from a Source Distribution +4. Building a Repository Working Copy +5. Portability +6. Tests +7. Doxygen +8. Troubleshooting + + +1. Introduction +=============== +Note that the daemon and client API can be installed separately. + +This document describes how to build the Qpid/C++ broker and client, either +from a checkout of the source or from a source distribution. + +This also explains how to install the required prerequisites for Qpid/C++. + + +2. Prerequisites. +================ +We prefer to avoid spending time accommodating older versions of these +packages, so please make sure that you have the latest stable versions. +Known version numbers for a succesfull build are given in brackets, take +these as a recommended minimum version. Older unix versions, for example, +Redhat Linux 3, will almost certainly require some packages to be upgraded. + + +2.1. What to Install +==================== +The following libraries and header files must be installed to build +a source distribution: + * boost <http://www.boost.org> (1.33.1) + * e2fsprogs <http://e2fsprogs.sourceforge.net/> (1.39) + * pkgconfig <http://pkgconfig.freedesktop.org/wiki/> (0.21) + +Optional cluster functionality requires: + * openais <http://openais.org/> (0.80.3) + +Running qpid test suite requires: + * cppunit <http://cppunit.sourceforge.net> (1.11.4) + +Qpid has been built using the GNU C++ compiler: + * gcc <http://gcc.gnu.org/> (3.2.3) + +If you want to build directly from the SVN repository you will need +all of the above plus: + + * GNU make <http://www.gnu.org/software/make/> (3.8.0) + * autoconf <http://www.gnu.org/software/autoconf/> (2.61) + * automake <http://www.gnu.org/software/automake/> (1.9.6) + * help2man <http://www.gnu.org/software/help2man/> (1.36.4) + * libtool <http://www.gnu.org/software/libtool/> (1.5.22) + * doxygen <ftp://ftp.stack.nl/pub/users/dimitri/> (1.5.1) + * graphviz <http://www.graphviz.org/> (2.12) + * ruby 1.8 <http://www.ruby-lang.org> (1.8.4) + + +2.2. How to Install +=================== + +2.2.1. Using Package Management Tools +===================================== +On linux most packages can be installed using your distribution's package +management tool. For example on Fedora: + # yum install pkgconfig e2fsprogs boost-devel cppunit-devel openais-devel ruby + # yum install make gcc-c++ autoconf automake libtool doxygen help2man graphviz # yum install e2fsprogs-devel + +Follow the manual installation instruction below for any packages not +available through yum. + +2.2.2. From Source +================== +Required dependencies can be installed and built from source distributions. +It is recommended that you create a directory to install them to, for example, +~/qpid-tools. + + To build and install the dependency pakcages: + + 1. Unzip and untar them and cd to the untared directory. + 2. do: + # ./configure --prefix=~/qpid-tools + # make install + +The exceptions are openais and boost. + +- openais +========= +Unpack the source distribution and do: + # make + # sudo make install DESTDIR= + # sudo ldconfig + +This will install in the standard places (/usr/lib, /usr/include etc.) + +Edit /etc/ais/openais.conf and modify the "bindnetaddr" setting +to your hosts IP address. Do not use 127.0.0.1. + +Make sure the UDP port set for mcastport in openais.conf (5405 by +default) is not blocked by your firewall. Disable the firewall or +configure it to allow this port for UDP. + +Finally start the ais daemon (must be done as root): + # sudo /sbin/aisexec + +Note that to run the AIS tests your primary group must be "ais". You +can change your primary group with the usermod command or set it +temporarily with the newgrp command. + +Troubleshooting tips: + +If aisexec goes into a loop printing "entering GATHER state", verify your firewall is allowing UDP traffic on the mcastport set in openais.conf. + +If aisexec reports "got nodejoin message 127.0.0.1" verify the +bindnetaddr in openais.conf is an active local IP address. ifconfig +will list local addresses. + +When aisexec is working correctly, the start-up log messages will end +with "entering OPERATIONAL state." and "got nodejoin message <ip +address>" where <ip address> is the local IP address specified for +bindnetaddr in openais.conf. + +For further info on openais http://openais.org/ + +- boost +======= + 1. Unpack boost-jam. + 2. Add bjam in the unpacked directory to your path. + 3. Unpack boost and cd to the boost untarred directory. + 4. do: + + # bjam -sTOOLS=gcc --prefix=~/qpid-tools + +2.2.3. autotools +================ +If you don't have sufficiently up-to-date autotools you can get the +latest by running run the script qpid-autotools-install. + +1. Decide where you would like to install the tools. It should be in a + local directory so that you do not need root privileges. (Suggest + $HOME/qpid-tools.) Create an empty directory. +2. Modify your environment variable PATH to ensure that the bin directory + within this directory comes first in the PATH string: + PATH=$HOME/qpid-tools/bin:$PATH +3. Set PKG_CONFIG_PATH=$HOME/qpid-tools/lib/pkgconfig:/usr/lib/pkgconfig + (or if it already exists, make sure that the above path to your + qpid-tools directory is first). +4. Run the install utility from the cpp directory: + ./qpid-autotools-install --prefix=$HOME/qpid-tools --skip-check + (Note that --prefix will only accept an absolute path, so don't use + ~/qpid-tools.) The utility will download, compile and install the + required tools into the qpid-tools directory (this may take a little + time). Watch for any notices about paths at the end of the install - + this means that your environment is not correct - see steps 2 and 3 + above. + NOTE: If you omit the --skip-check option, the check of the build + can add up to an hour to what is normally a few minutes of install + time. +5. Perform a check: from the command-line run "which automake" and + ensure that it finds the automake in your qpid-tools directory. If not, + check that the build completed normally and your environment. +6. (Optional) If having the build artifacts lying around bothers you, delete + the (hidden) build directory cpp/.build-auto-tools. + +To see help, run ./qpid-autotools-install --help. + + +2.3. Important Environment Variable Settings +============================================ +Ensure that all the build tools are available on your path, when they are +manually installed to non-standard locations. For example: + + # export PATH=~/qpid-tools/bin:$PATH + +Ensure that pkg-config is set up correctly. For example: + + # export PKG_CONFIG_PATH=~/qpid-tools/lib/pkgconfig:/usr/local/pkgconfig + # export PKG_CONFIG=~/qpid-tools/bin/pkg-config + +Ensure that the boost libraries are made available on the gcc library path. +For example: + + # export CXXFLAGS=-I~/qpid-tools/include/boost-1_33_1 + + +3. Building from a Source Distribution +====================================== +In the distribution directory + +Build and install with: + + # ./configure --prefix=<install_location> + # make all + # make install + +To build and test everything: + + # make + # make check + +This builds in the source tree. You can have multiple builds in the +same working copy with different configuration. For example you can do +the following to build twice, once for debug, the other with +optimization: + + # make distclean + # mkdir .build-dbg .build-opt + # (cd .build-opt ../configure --prefix=/tmp/x && make && make check) + # (cd .build-dbg ../configure CXXFLAGS=-g --prefix=/tmp/x \ + && make && make check) + + +4. Building a Repository Working Copy +===================================== +To get the source code from the subversion repository (trunk) do: + + # svn checkout https://svn.apache.org/repos/asf/incubator/qpid/trunk/. + +To build a fresh checkout: + +Cd to qpid/cpp subdirectory. Before running make on a fresh checkout do: + + # ./bootstrap + +This generates config, makefiles and the like - check the script for +details. You only need to do this once, "make" will keep everything up +to date thereafter (including re-generating configuration & Makefiles +if the automake templates change etc.) + +If you are developing code yourself, or if you want to help +us keep the code as tight and robust as possible, consider enabling +the use of valgrind. If you configure like this: + + # ./configure --enable-valgrind + +That will arrange (assuming you have valgrind installed) for "make check" +to run tests via valgrind. That makes the tests run more slowly, but +helps detect certain types of bugs, as well as memory leaks. If you run +"make check" and valgrind detects a leak that is not listed as being +"ignorable-for-now", the test script in question will fail. However, +recording whether a leak is ignorable is not easy, when the stack +signature, libraries, compiler, O/S, architecture, etc., may all vary, +so if you see a new leak, try to figure out if it's one you can fix +before adding it to the list. + +Now follow instruction for building from a source distribution in step (3). + + +5. Portability +============== +All system calls are abstracted by classes under lib/common/sys. This +provides an object-oriented C++ API and contains platform-specific +code. + +These wrappers are mainly inline by-value classes so they impose no +run-time penalty compared do direct system calls. + +Initially we will have a full linux implementation and a portable +implementation sufficient for the client using the APR portability +library. The implementations may change in future but the interface +for qpid code outside the qpid/sys namespace should remain stable. + + +6. Tests +======== +See src/tests/README for details. + + +7. Doxygen +========== +Doxygen generates documentation in several formats from source code +using special comments. You can use javadoc style comments if you know +javadoc, if you don't or want to know the fully story on doxygen +markup see http://www.stack.nl/~dimitri/doxygen/ + +Even even if the code is completely uncommented, doxygen generates +UML-esque dependency diagrams that are ''extremely'' useful in navigating +around the code, especially for newcomers. + +To try it out "make doxygen" then open doxygen/html/index.html. + + +8. Troubleshooting +================== +When building, get the following on configure + configure: error: Package requirements (apr-1 >= 1.2.2) were not met: + + No package 'apr-1' found + +The following has not been set + export PKG_CONFIG_PATH=$HOME/qpid-tools/lib/pkgconfig:/usr/lib/pkgconfig |