diff options
Diffstat (limited to 'qpid/doc/book/src/java-broker/Qpid-JMX-Management-Console-User-Guide.xml')
-rw-r--r-- | qpid/doc/book/src/java-broker/Qpid-JMX-Management-Console-User-Guide.xml | 793 |
1 files changed, 793 insertions, 0 deletions
diff --git a/qpid/doc/book/src/java-broker/Qpid-JMX-Management-Console-User-Guide.xml b/qpid/doc/book/src/java-broker/Qpid-JMX-Management-Console-User-Guide.xml new file mode 100644 index 0000000000..35bb5dfbe8 --- /dev/null +++ b/qpid/doc/book/src/java-broker/Qpid-JMX-Management-Console-User-Guide.xml @@ -0,0 +1,793 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- + + Licensed to the Apache Software Foundation (ASF) under one + or more contributor license agreements. See the NOTICE file + distributed with this work for additional information + regarding copyright ownership. The ASF licenses this file + to you under the Apache License, Version 2.0 (the + "License"); you may not use this file except in compliance + with the License. You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, + software distributed under the License is distributed on an + "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + KIND, either express or implied. See the License for the + specific language governing permissions and limitations + under the License. + +--> + +<section id="Qpid-JMX-Management-Console-User-Guide"><title> + Qpid JMX Management Console User Guide + </title><section role="h1" id="QpidJMXManagementConsoleUserGuide-QpidJMXManagementConsoleUserGuide"><title> + Qpid JMX Management Console User Guide + </title> + + + <para> + + The Qpid JMX Management Console is a standalone Eclipse RCP + application for managing and monitoring the Qpid Java server + utilising its JMX management interfaces. + </para><para> + This guide will give an overview of configuring the console, the + features supported by it, and how to make use of the console in + managing the various JMX Management Beans (MBeans) offered by the + Qpid Java server. + </para> +<!--h1--></section> + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-Startup-26Configuration"><title> + + Startup & Configuration + </title> + + <para> + + </para> + <section role="h2" id="QpidJMXManagementConsoleUserGuide-Startup"><title> + Startup + </title> + + <para> + + The console can be started in the following way, depending on + platform: + </para><itemizedlist> + <listitem><para> + <emphasis>Windows:</emphasis> by running the <emphasis>qpidmc.exe</emphasis> executable + file. + </para></listitem> + <listitem><para> + <emphasis>Linux:</emphasis> by running the <emphasis>qpidmc</emphasis> executable. + </para></listitem> + <listitem><para> + <emphasis>Mac OS X:</emphasis> by launching the <emphasis>Qpid Management + Console.app</emphasis> application bundle. + </para></listitem> + </itemizedlist><para> + + </para> + </section> + + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-SSLconfiguration"><title> + SSL + configuration + </title> + + <para> + + Newer Qpid Java servers can protect their JMX connections with + SSL, and this is enabled by default. When attempting to connect + to a server with this enabled, the console must be able to verify + the SSL certificate presented to it by the server or the + connection will fail. + </para><para> + If the server makes use of an SSL certificate signed by a known + Signing CA (Certification Authority) then the console needs no + extra configuration, and will make use of Java's default + system-wide CA TrustStore for certificate verification (you may + however have to update the system-wide default CA TrustStore if + your certified is signed by a less common CA that is not already + present in it). + </para><para> + If however the server is equipped with a self-signed SSL + certificate, then the management console must be provided with an + appropriate SSL TrustStore containing the public key for the SSL + certificate, so that it is able to validate it when presented by + the server. The server ships with a script to create an example + self-signed SSL certificate, and store the relevant entries in a + KeyStore and matching TrustStore. This script can serve as a + guide on how to use the Java Keytool security utility to + manipulate your own stores, and more information can be found in + the JSSE Reference Guide: + <ulink url="http://java.sun.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CustomizingStores">http://java.sun.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CustomizingStores</ulink>. + </para><para> + Supplying the necessary details to the console is performed by + setting the <emphasis>javax.net.ssl.trustStore</emphasis> and + <emphasis>javax.net.ssl.trustStorePassword</emphasis> environment variables + when starting it. This can be done at the command line, but the + preferred option is to set the configuration within the + <emphasis>qpidmc.ini</emphasis> launcher configuration file for repeated + usage. This file is equipped with a template to ease + configuration, this should be uncommented and edited to suit your + needs. It can be found in the root of the console releases for + Windows, and Linux. For Mac OS X the file is located within the + consoles <emphasis>.app</emphasis> application bundle, and to locate and edit + it you must select <emphasis>'Show Package Contents'</emphasis> when + accessing the context menu of the application, then browse to the + <emphasis>Contents/MacOS</emphasis> sub folder to locate the file. + </para> +<!--h2--></section> + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-JMXMPconfiguration"><title> + JMXMP + configuration + </title> + + <para> + + Older releases of the Qpid Java server can make use of the Java + Management Extensions Messaging Protocol (JMXMP) to provide + protection for their JMX connections. This occurs when the server + has its main configuration set with the management + <emphasis>'security-enabled'</emphasis> property set to true. + </para><para> + In order to connect to this configuration of server, the console + needs an additional library that is not included within the Java + SE platform and cannot be distributed with the console due to + licensing restrictions. + </para><para> + You can download the JMX Remote API 1.0.1_04 Reference + Implementation from the Sun website <xref linkend="qpid_download.jsp"/>. The included + <emphasis>jmxremote-1_0_1-bin/lib/jmxremote_optional.jar</emphasis> file must + be added to the <emphasis>plugins/jmxremote.sasl_1.0.1</emphasis> folder of + the console release (again, in Mac OS X you will need to select + <emphasis>'Show package contents'</emphasis> from the context menu whilst + selecting the management console bundle in order to reveal the + inner file tree). + </para><para> + Following this the console will automatically load the JMX Remote + Optional classes and negotiate the SASL authentication profile + type when encountering a JMXMP enabled Qpid Java server. + </para> +<!--h2--></section> +<!--h1--></section> + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ManagingServerConnections"><title> + + Managing Server Connections + </title> + + <para> + + </para> + <section role="h2" id="QpidJMXManagementConsoleUserGuide-MainToolbar"><title> + Main Toolbar + </title> + + <para> + + The main toolbar of the console can be seen in the image below. + The left most buttons respectively allow for adding a new server + connection, reconnecting to an existing server selected in the + connection tree, disconnecting the selected server connection, + and removing the server from the connection tree. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113098.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + + + Beside these buttons is a combo for selecting the refresh + interval; that is, how often the console requests updated + information to display for the currently open area in the main + view. Finally, the right-most button enables an immediate update. + </para> + </section> + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-Connectingtoanewserver"><title> + Connecting + to a new server + </title> + + <para> + + To connect to a new server, press the <emphasis>Add New Server</emphasis> + toolbar button, or select the <emphasis>Qpid Manager -> Add New + Connection</emphasis> menu item. At this point a dialog box will be + displayed requesting the server details, namely the server + hostname, management port, and a username and password. An + example is shown below: + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113099.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + + Once all the required details are entered, pressing Connect will + initiate a connection attempt to the server. It the attempt fails + a reason will be shown and the server will not be added to the + connection tree. If the attempt is successful the server will be + added to the connections list and the entry expanded to show the + initial administration MBeans the user has access to and any + VirtualHosts present on the server, as can be seen in the figure + below. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113100.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + + If the server supports a newer management API than the console in + use, once connected this initial screen will contain a message on + the right, indicating an upgraded console should be sought by the + user to ensure all management functionality supported by the + server is being utilised. + </para> +<!--h2--></section> + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-Reconnectingtoaserver"><title> + Reconnecting + to a server + </title> + + <para> + + If a server has been connected to previously, it will be saved as + an entry in the connection tree for further use. On subsequent + connections the server can simply be selected from the tree and + using the <emphasis>Reconnect</emphasis> toolbar button or <emphasis>Qpid Manager + -> Reconnect</emphasis> menu item. At this stage the console will + prompt simply for the username and password with which the user + wishes to connect, and following a successful connection the + screen will appear as shown previously above. + </para> +<!--h2--></section> + + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-Disconnectingfromaserver"><title> + Disconnecting + from a server + </title> + + <para> + + To disconnect from a server, select the connection tree node for + the server and press the <emphasis>Disconnect</emphasis> toolbar button, or + use the <emphasis>Qpid Manager -> Disconnect</emphasis> menu option. + </para> +<!--h2--></section> + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-Removingaserver"><title> + Removing a + server + </title> + + <para> + + To remove a server from the connection list, select the + connection tree node for the server and press the <emphasis>Remove</emphasis> + toolbar button, or use the <emphasis>Qpid Manager -> Remove + Connection</emphasis> menu option. + </para> +<!--h2--></section> +<!--h1--></section> + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-Navigatingaconnectedserver"><title> + Navigating a connected server + </title> + + <para> + + Once connected to a server, the various areas available for + administration are accessed using the Qpid Connections tree at + the left side of the application. To open a particular MBean from + the tree for viewing, simply select it in the tree and it will be + opened in the main view. + <mediaobject><imageobject><imagedata fileref="images/3113101.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + As there may be vast numbers of Queues, Connections, and + Exchanges on the server these MBeans are not automatically added + to the tree along with the general administration MBeans. + Instead, dedicated selection areas are provided to allow users to + select which Queue/Connection/Exchange they wish to view or add + to the tree. These areas can be found by clicking on the + Connections, Exchanges, and Queues nodes in the tree under each + VirtualHost, as shown in the figure above. One or more MBeans may + be selected and added to the tree as Favourites using the button + provided. These settings are saved for future use, and each time + the console connects to the server it will check for the presence + of the MBean previously in the tree and add them if they are + still present. Queue/Connection/Exchange MBeans can be removed + from the tree by right clicking on them to expose a context menu + allowing deletion. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113102.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + As an alternative way to open a particular MBean for viewing, + without first adding it to the tree, you can simply double click + an entry in the table within the Queue/Connection/Exchange + selection areas to open it immediately. It is also possible to + open some MBeans like this whilst viewing certain other MBeans. + When opening an MBean in either of these ways, a Back button is + enabled in the top right corner of the main view. Using this + button will return you to the selection area or MBean you were + previously viewing. The history resets each time the tree is used + to open a new area or MBean. + </para> +<!--h1--></section> + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ConfigurationManagementMBean"><title> + + ConfigurationManagement MBean + </title> + + <para> + + The ConfigurationManagement MBean is available on newer servers, + to users with admin level management rights. It offers the + ability to perform a live reload of the <emphasis>Security</emphasis> + sections defined in the main server configuration file (e.g. + defaults to: <emphasis>etc/config.xml</emphasis>). This is mainly to allow + updating the server Firewall configuration to new settings + without a restart, and can be performed by clicking the Execute + button and confirming the prompt which follows. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113103.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para> +<!--h1--></section> + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-LoggingManagementMBean"><title> + + LoggingManagement MBean + </title> + + <para> + + The LoggingManagement MBean is available on newer servers, and + accessible by admin level users. It allows live alteration of the + logging behaviour, both at a Runtime-only level and at the + configuration file level. The latter can optionally affect the + Runtime configuration, either through use of the servers + automated LogWatch ability which detects changes to the + configuration file and reloads it, or by manually requesting a + reload. This functionality is split across two management tabs, + Runtime Options and ConfigurationFile Options. + </para> + <section role="h2" id="QpidJMXManagementConsoleUserGuide-RuntimeOptions"><title> + Runtime + Options + </title> + + <para> + + <mediaobject><imageobject><imagedata fileref="images/3113104.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + The Runtime Options tab allows manipulation of the logging + settings without affecting the configuration files (this means + the changes will be lost when the server restarts), and gives + individual access to every Logger active within the server. + </para><para> + As shown in the figure above, the table in this tab presents the + Effective Level of each Logger. This is because the Loggers form + a hierarchy in which those without an explicitly defined (in the + logging configuration file) Level will inherit the Level of their + immediate parent; that is, the Logger whose full name is a prefix + of their own, or if none satisfy that condition then the + RootLogger is their parent. As example, take the + <emphasis>org.apache.qpid</emphasis> Logger. It is parent to all those below + it which begin with <emphasis>org.apache.qpid</emphasis> and unless they have + a specific Level of their own, they will inherit its Level. This + can be seen in the figure, whereby all the children Loggers + visible have a level of WARN just like their parent, but the + RootLogger Level is INFO; the children have inherited the WARN + level from <emphasis>org.apache.qpid</emphasis> rather than INFO from the + RootLogger. + </para><para> + To aid with this distinction, the Logger Levels that are + currently defined in the configuration file are highlighted in + the List. Changing these levels at runtime will also change the + Level of all their children which haven't been set their own + Level using the runtime options. In the latest versions of the + LoggingManagement MBean, it is possible to restore a child logger + that has had an explicit level se, to inheriting that of its + parent by setting it to an INHERITED level that removes any + previously set Level of its own. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113105.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + In order to set one of more Loggers to a new Level, they should + be selected in the table (or double click an individual Logger to + modify it) and the <emphasis>Edit Selected Logger(s)</emphasis> button + pressed to load the dialog shown above. At this point, any of the + available Levels supported by the server can be applied to the + Loggers selected and they will immediately update, as will any + child Loggers without their own specific Level. + </para><para> + The RootLogger can be similarly edited using the button at the + bottom left of the window. + </para> +<!--h2--></section> + + <section role="h2" id="QpidJMXManagementConsoleUserGuide-ConfigurationFileOptions"><title> + ConfigurationFile + Options + </title> + + <para> + + The ConfigurationFile Options tab allows alteration of the Level + settings for the Loggers defined in the configuration file, + allowing changes to persist following a restart of the server. + Changes made to the configuration file are only applied + automatically while the sever is running if it was configured to + enable the LogWatch capability, meaning it will monitor the + configuration file for changes and apply the new configuration + when the change is detected. If this was not enabled, the changes + will be picked up when the server is restarted. The status of the + LogWatch feature is shown at the bottom of the tab. + Alternatively, in the latest versions of the LoggingManagement + MBean it is possible to reload the logging configuration file on + demand. + </para><para> + Manipulating the Levels is as on the Runtime Options tab, either + double-click an individual Logger entry or select multiple + Loggers and use the button to load the dialog to set the new + Level. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113106.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + One issue to note of when reloading the configuration file + settings, either automatically using LogWatch or manually, is + that any Logger set to a specific Level using the Runtime Options + tab that is not defined in the configuration file will maintain + that Level when the configuration file is reloaded. In other + words, if a Logger is defined in the configuration file, then the + configuration file will take precedence at reload, otherwise the + Runtime options take precedence. + </para><para> + This situation will be immediately obvious by examining the + Runtime Options tab to see the effective Level of each Logger + – unless it has been altered with the RuntimeOptions or + specifically set in the configuration file, a Logger Level should + match that of its parent. In the latest versions of the + LoggingManagement MBean, it is possible to use the RuntimeOptions + to restore a child logger to inheriting from its parent by + setting it with an INHERITED level that removes any previously + set Level of its own. + + </para> +<!--h2--></section> +<!--h1--></section> + + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ServerInformationMBean"><title> + ServerInformation MBean + </title> + + <para> + + <mediaobject><imageobject><imagedata fileref="images/3113107.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + The ServerInformation MBean currently only conveys various pieces + of version information to allow precise identification of the + server version and its management capabilities. In future it is + likely to convey additional server-wide details and/or + functionality. + </para> +<!--h1--></section> + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-UserManagementMBean"><title> + + UserManagement MBean + </title> + + <para> + + The UserManagement MBean is accessible by admin level users, and + allows manipulation of existing user accounts and creation of new + user accounts. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113108.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + + To add a new user, press the <emphasis>Add New User</emphasis> button, which + will load the dialog shown below. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113109.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Here you may enter the new users Username, Password, and select + their JMX Management Rights. This controls whether or not they + have access to the management interface, and if so what + capabilities are accessible. <emphasis>Read Only</emphasis> access allows + undertaking any operations that do not alter the server state, + such as viewing messages. <emphasis>Read + Write</emphasis> access allows use + of all operations which are not deemed admin-only (such as those + in the UserManagement MBean itself). <emphasis>Admin</emphasis> access allows + a user to utilize any operation, and view the admin-only MBeans + (currently these are ConfigurationManagement, LoggingManagement, + and UserManagement). + </para><para> + One or more users at a time may be deleted by selecting them in + the table and clicking the <emphasis>Delete User(s)</emphasis> button. The + console will then prompt for confirmation before undertaking the + removals. Similarly, the access rights for one or more users may + be updated by selecting them in the table and clicking the + <emphasis>Set Rights</emphasis> button. The console will then display a + dialog enabling selection of the new access level and + confirmation to undertake the update. + </para><para> + An individual user password may be updated by selecting the user + in the table in and clicking the <emphasis>Set Password</emphasis> button. + The console will then display a dialog enabling input of the new + password and confirmation to undertake the update. + </para><para> + + The server caches the user details in memory to aid performance. + If may sometimes be necessary to externally modify the password + and access right files on disk. In order for these changes to be + known to the server without a restart, it must be instructed to + reload the file contents. This can be done using the provided + <emphasis>Reload User Details</emphasis> button (on older servers, only the + management rights file is reloaded, on newer servers both files + are. The description on screen will indicate the behaviour). + After pressing this button the console will seek confirmation + before proceeding. + </para> +<!--h1--></section> + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-VirtualHostManagerMBean"><title> + + VirtualHostManager MBean + </title> + + <para> + + Each VirtualHost in the server has an associated + VirtualHostManager MBean. This allows viewing, creation, and + deletion of Queues and Exchanges within the VirtualHost. + </para><para> + Clicking the <emphasis>Create</emphasis> button in the Queue section will + open a dialog allowing specification of the Name, Owner + (optional), and durability properties of the new Queue, and + confirmation of the operation. + </para><para> + One or more Queues may be deleted by selecting them in the table + and clicking the <emphasis>Delete</emphasis> button. This will unregister the + Queue bindings, remove the subscriptions and delete the Queue(s). + The console will prompt for confirmation before undertaking the + operation. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113110.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Clicking the <emphasis>Create</emphasis> button in the Exchange section will + open a dialog allowing specification of the Name, Type, and + Durable attributes of the new Exchange, and confirmation of the + operation. + </para><para> + One or more Exchanges may be deleted by selecting them in the + table and clicking the <emphasis>Delete</emphasis> button. This will + unregister all the related channels and Queue bindings then + delete the Exchange(s). The console will prompt for confirmation + before undertaking the operation. + </para><para> + + Double-clicking on a particular Queue or Exchange name in the + tables will open the MBean representing it. + </para> +<!--h1--></section> + + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-Notifications"><title> + + Notifications + </title> + + <para> + + MBeans on the server can potentially send Notifications that + users may subscribe to. When managing an individual MBean that + offers Notifications types for subscription, the console supplies + a Notifications tab to allow (un)subscription to the + Notifications if desired and viewing any that are received + following subscription. + </para><para> + In order to provide quicker access to/awareness of any received + Notifications, each VirtualHost area in the connection tree has a + Notifications area that aggregates all received Notifications for + MBeans in that VirtualHost. An example of this can be seen in the + figure below. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113111.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + All received Notifications will be displayed until such time as + the user removes them, either in this aggregated view, or in the + Notifications area of the individual MBean that generated the + Notification. + </para><para> + They may be cleared selectively or all at once. To clear + particular Notifications, they should be selected in the table + before pressing the <emphasis>Clear</emphasis> button. To clear all + Notifications, simply press the <emphasis>Clear</emphasis> button without + anything selected in the table, at which point the console will + request confirmation of this clear-all action. + </para> +<!--h1--></section> + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ManagingQueues"><title> + Managing + Queues + </title> + + <para> + + As mentioned in earlier discussion of Navigation, Queue MBeans + can be opened either by double clicking an entry in the Queues + selection area, or adding a queue to the tree as a favourite and + clicking on its tree node. Unique to the Queue selection screen + is the ability to view additional attributes beyond just that of + the Queue Name. This is helpful for determining which Queues + satisfy a particular condition, e.g. having <X> messages on + the queue. The example below shows the selection view with + additional attributes <emphasis>Consumer Count, Durable, MessageCount, + and QueueDepth</emphasis> (selected using the <emphasis>Select + Attributes</emphasis> button at the bottom right corner of the + table)<emphasis>.</emphasis> + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113112.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Upon opening a Queue MBean, the Attributes tab is displayed, as + shown below. This allows viewing the value all attributes, + editing those which are writable values (highlighted in blue) if + the users management permissions allow, viewing descriptions of + their purpose, and graphing certain numerical attribute values as + they change over time. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113113.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + The next tab contains the operations that can be performed on the + queue. The main table serves as a means of viewing the messages + on the queue, and later for selecting specific messages to + operate upon. It is possible to view any desired range of + messages on the queue by specifying the visible range using the + fields at the top and pressing the <emphasis>Set</emphasis> button. Next to + this there are helper buttons to enable faster browsing through + the messages on the queue; these allow moving forward and back by + whatever number of messages is made visible by the viewing range + set. The Queue Position column indicates the position of each + message on the queue, but is only present when connected to newer + servers as older versions cannot provide the necessary + information to show this (unless only a single message position + is requested). + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113114.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Upon selecting a message in the table, its header properties and + redelivery status are updated in the area below the table. Double + clicking a message in the table (or using the <emphasis>View Message + Content</emphasis> button to its right) will open a dialog window + displaying the contents of the message. + </para><para> + One or more messages can be selected in the table and moved to + another queue in the VirtualHost by using the <emphasis>Move + Message(s)</emphasis> button, which opens a dialog to enable selection + of the destination and confirmation of the operation. Newer + servers support the ability to similarly copy the selected + messages to another queue in a similar fashion, or delete the + selected messages from the queue after prompting for + confirmation. + </para><para> + Finally, all messages (that have not been acquired by consumers) + on the queue can be deleted using the <emphasis>Clear Queue</emphasis> + button, which will generate a prompt for confirmation. On newer + servers, the status bar at the lower left of the application will + report the number of messages actually removed. + </para> +<!--h1--></section> + + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ManagingExchanges"><title> + + Managing Exchanges + </title> + + <para> + Exchange MBeans are opened for management operations in similar + fashion as described for Queues, again showing an Attributes tab + initially, with the Operations tab next: + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113115.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Of the four default Exchange Types <emphasis>(direct, fanout, headers, + and topic)</emphasis> all but <emphasis>headers</emphasis> have their bindings + presented in the format shown above. The left table provides the + binding/routing keys present in the exchange. Selecting one of + these entries in the table prompts the right table to display all + the queues associated with this key. Pressing the <emphasis>Create</emphasis> + button opens a dialog allowing association of an existing queue + with the entered Binding. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113116.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + The <emphasis>headers</emphasis> Exchange type (default instantiation + <emphasis>amq.match or amq.headers</emphasis>) is presented as below: + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113117.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + In the previous figure, the left table indicates the binding + number, and the Queue associated with the binding. Selecting one + of these entries in the table prompts the right table to display + the header values that control when the binding matches an + incoming message. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113118.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + </para><para> + Pressing the <emphasis>Create</emphasis> button when managing a + <emphasis>headers</emphasis> Exchange opens a dialog allowing creation of a + new binding, associating an existing Queue with a particular set + of header keys and values. The <emphasis>x-match</emphasis> key is required, + and instructs the server whether to match the binding with + incoming messages based on ANY or ALL of the further key-value + pairs entered. If it is desired to enter more than 4 pairs, you + may press the <emphasis>Add additional field</emphasis> button to create a + new row as many times as is required. + + When managing a <emphasis>headers</emphasis> Exchange, double clicking an + entry in the left-hand table will open the MBean for the Queue + specified in the binding properties. + </para><para> + When managing another Exchange Type, double clicking the Queue + Name in the right-hand table will open the MBean of the Queue + specified. + </para> +<!--h1--></section> + + <section role="h1" id="QpidJMXManagementConsoleUserGuide-ManagingConnections"><title> + + Managing Connections + </title> + + <para> + + Exchange MBeans are opened for management operations in similar + fashion as described for Queues, again showing an Attributes tab + initially, with the Operations tab next, and finally a + Notifications tab allowing subscription and viewing of + Notifications. The Operations tab can be seen in the figure + below. + </para><para> + <mediaobject><imageobject><imagedata fileref="images/3113119.png" format="PNG" scalefit="1"/></imageobject><textobject><phrase/></textobject><caption><para/></caption></mediaobject> + The main table shows the properties of all the Channels that are + present on the Connection, including whether they are + <emphasis>Transactional</emphasis>, the <emphasis>Number of Unacked Messages</emphasis> + on them, and the <emphasis>Default Queue</emphasis> if there is one (or + <emphasis>null</emphasis> if there is not). + </para><para> + The main operations supported on a connection are Commiting and + Rolling Back of Transactions on a particular Channel, if the + Channel is Transactional. This can be done by selecting a + particular Channel in the table and pressing the <emphasis>Commit + Transactions</emphasis> or <emphasis>Rollback Transactions</emphasis> buttons at + the lower right corner of the table, at which point the console + will prompt for confirmation of the action. These buttons are + only active when the selected Channel in the table is + Transactional. + </para><para> + The final operation supported is closing the Connection. After + pressing the <emphasis>Close Connection</emphasis> button, the console will + prompt for confirmation of the action. If this is carried out, + the MBean for the Connection being managed will be removed from + the server. The console will be notified of this by the server + and display an information dialog to that effect, as it would if + any other MBean were to be unregistered whilst being viewed. + </para><para> + Double clicking a row in the table will open the MBean of the + associated <emphasis>Default Queue</emphasis> if there is one. + </para> + +<!--h1--></section> +</section> |