1 files changed, 0 insertions, 137 deletions
diff --git a/qpid/java/tools/bin/perf-report b/qpid/java/tools/bin/perf-report
deleted file mode 100755
index 7de3f2b602..0000000000
--- a/qpid/java/tools/bin/perf-report
+++ /dev/null
@@ -1,137 +0,0 @@
-#!/bin/sh
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# This will run the following test cases defined below and produce
-# a report in tabular format.
-
-QUEUE="queue;{create:always,node:{x-declare:{auto-delete:true}}}"
-DURA_QUEUE="dqueue;{create:always,node:{durable:true,x-declare:{auto-delete:true}}}"
-TOPIC="amq.topic/test"
-DURA_TOPIC="amq.topic/test;{create:always,link:{durable:true}}"
-
-COMMON_CONFIG="-server -Durl=amqp://guest:guest@clientid/testpath?brokerlist='tcp://localhost:5672'"
-
-waitfor() { until grep -a -l "$2" $1 >/dev/null 2>&1 ; do sleep 1 ; done ; }
-cleanup()
-{  
-  pids=`ps aux | grep java | grep Perf | awk '{print $2}'`
-  if [ "$pids" != "" ]; then
-    kill -3 $pids
-    kill -9 $pids >/dev/null 2>&1
-  fi
-}
-
-# $1 test name
-# $2 consumer options
-# $3 producer options
-run_testcase()
-{  
-  sh run-sub $COMMON_CONFIG $2 > sub.out &
-  sh run-pub $COMMON_CONFIG $3 > pub.out &
-  waitfor pub.out "Controller: Completed the test"
-  sleep 2 #give a grace period to shutdown
-  print_result $1
-  mv pub.out $1.pub.out
-  mv sub.out $1.sub.out
-}
-
-print_result()
-{
-  prod_rate=`cat pub.out | grep "Avg Producer rate" | awk '{print $5}'`
-  sys_rate=`cat pub.out | grep "System Throughput" | awk '{print $4}'`
-  cons_rate=`cat pub.out | grep "Avg Consumer rate" | awk '{print $5}'` 
-  avg_latency=`cat pub.out | grep "Avg System Latency" | awk '{print $5}'`
-  min_latency=`cat pub.out | grep "Min System Latency" | awk '{print $5}'`
-  max_latency=`cat pub.out | grep "Max System Latency" | awk '{print $5}'`
-
-  printf "|%-15s|%15.2f|%13.2f|%13.2f|%11.2f|%11.2f|%11.2f|\n" $1 $sys_rate $prod_rate $cons_rate $avg_latency $min_latency $max_latency
-  echo "------------------------------------------------------------------------------------------------"
-}
-
-trap cleanup EXIT
-rm -rf *.out #cleanup old files.
-
-echo "Test report on " `date +%F`
-echo "================================================================================================"
-echo "|Test           |System throuput|Producer rate|Consumer Rate|Avg Latency|Min Latency|Max Latency|"
-echo "------------------------------------------------------------------------------------------------"
-
-# The message counts and warmup counts are set to very low values for quick testing of the script.
-# For a real performance run I recommend setting warmup count to 10k and message count in excess of 100k
-# However for transactions, sync_publish and especially small durable transactions (which is quite slow) I recommend
-# setting very low values to start with and experiment while increasing them slowly.
-
-# Test 1 Trans Queue
-run_testcase "Trans_Queue" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 2 Dura Queue
-run_testcase "Dura_Queue" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 3 Dura Queue Sync
-run_testcase "Dura_Queue_Sync" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
-
-# Test 4 Dura Queue Sync Publish and Ack
-run_testcase "Dura_SyncPubAck" "-Daddress=$DURA_QUEUE -Ddurable=true -Dsync_ack=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dsync_publish=persistent"
-
-# Test 5 Topic
-run_testcase "Topic" "-Daddress=$TOPIC" "-Daddress=$TOPIC -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 6 Durable Topic
-run_testcase "Dura_Topic" "-Daddress=$DURA_TOPIC -Ddurable=true" "-Daddress=$DURA_TOPIC -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 7 Fanout
-run_testcase "Fanout" "-Daddress=amq.fanout" "-Daddress=amq.fanout -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 8 Small TX
-run_testcase "Small_Txs_2" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=1" \
- "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=1"
-
-# Test 9 Large TX
-run_testcase "Large_Txs_1000" "-Daddress=$DURA_QUEUE -Ddurable=true -Dtransacted=true -Dtrans_size=10" \
- "-Daddress=$DURA_QUEUE -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10 -Dtransacted=true -Dtrans_size=10"
-
-# Test 10 256 MSG
-run_testcase "Msg_256b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=256 -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 11 512 MSG
-run_testcase "Msg_512b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=512 -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 12 2048 MSG
-run_testcase "Msg_2048b" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Dmsg_size=2048 -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 13 Random size MSG
-run_testcase "Random_Msg_Size" "-Daddress=$QUEUE" "-Daddress=$QUEUE -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 14 Random size MSG Durable
-run_testcase "Rand_Msg_Dura" "-Daddress=$DURA_QUEUE -Ddurable=true" "-Daddress=$DURA_QUEUE -Ddurable=true -Drandom_msg_size=true -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 15 64K MSG
-run_testcase "Msg_64K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 16 Durable 64K MSG
-run_testcase "Msg_Durable_64K" "-Daddress=$DURA_QUEUE -Ddurable=true -Damqj.tcpNoDelay=true" \
- "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=64000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 17 500K MSG
-run_testcase "Msg_500K" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true" "-Daddress=$QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Dwarmup_count=1 -Dmsg_count=10"
-
-# Test 18 Durable 500K MSG
-run_testcase "Msg_Dura_500K" "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Ddurable=true" \
- "-Daddress=$DURA_QUEUE -Damqj.tcpNoDelay=true -Dmsg_size=500000 -Ddurable=true -Dwarmup_count=1 -Dmsg_count=10"