Improvements based on review feedback:

1. All make targets are now PHONY.

2. Cleaned up the 'dev' target so that it passes --build
   to docker-compose.

3. Added pypy-specific tox environments. And added a new
   Dockerfile to build an image for the "test" container
   that contains pypy and pypy3.

4. Added a `make clean` target. It removes containers but
   requires the user to confirm.

5. Specify the depends_on order for slave -> master and
   made all sentinels depend on the slave coming up. The
   container running doesn't mean that redis is actually
   ready though, so I wrapped the "test" target in the
   Makefile with a wait script that waits until
   master is responding on port 6379.

1 files changed, 183 insertions, 0 deletions

diff --git a/util/wait-for-it.sh b/util/wait-for-it.sh
new file mode 100755
index 0000000..b931da1
--- /dev/null
+++ b/util/wait-for-it.sh
@@ -0,0 +1,183 @@
+#!/usr/bin/env bash
+# Use this script to test if a given TCP host/port are available
+
+WAITFORIT_cmdname=${0##*/}
+
+echoerr() { if [[ $WAITFORIT_QUIET -ne 1 ]]; then echo "$@" 1>&2; fi }
+
+usage()
+{
+    cat << USAGE >&2
+Usage:
+    $WAITFORIT_cmdname host:port [-s] [-t timeout] [-- command args]
+    -h HOST | --host=HOST       Host or IP under test
+    -p PORT | --port=PORT       TCP port under test
+                                Alternatively, you specify the host and port as host:port
+    -s | --strict               Only execute subcommand if the test succeeds
+    -q | --quiet                Don't output any status messages
+    -t TIMEOUT | --timeout=TIMEOUT
+                                Timeout in seconds, zero for no timeout
+    -- COMMAND ARGS             Execute command with args after the test finishes
+USAGE
+    exit 1
+}
+
+wait_for()
+{
+    if [[ $WAITFORIT_TIMEOUT -gt 0 ]]; then
+        echoerr "$WAITFORIT_cmdname: waiting $WAITFORIT_TIMEOUT seconds for $WAITFORIT_HOST:$WAITFORIT_PORT"
+    else
+        echoerr "$WAITFORIT_cmdname: waiting for $WAITFORIT_HOST:$WAITFORIT_PORT without a timeout"
+    fi
+    WAITFORIT_start_ts=$(date +%s)
+    while :
+    do
+        if [[ $WAITFORIT_ISBUSY -eq 1 ]]; then
+            nc -z $WAITFORIT_HOST $WAITFORIT_PORT
+            WAITFORIT_result=$?
+        else
+            (echo > /dev/tcp/$WAITFORIT_HOST/$WAITFORIT_PORT) >/dev/null 2>&1
+            WAITFORIT_result=$?
+        fi
+        if [[ $WAITFORIT_result -eq 0 ]]; then
+            WAITFORIT_end_ts=$(date +%s)
+            echoerr "$WAITFORIT_cmdname: $WAITFORIT_HOST:$WAITFORIT_PORT is available after $((WAITFORIT_end_ts - WAITFORIT_start_ts)) seconds"
+            break
+        fi
+        sleep 1
+    done
+    return $WAITFORIT_result
+}
+
+wait_for_wrapper()
+{
+    # In order to support SIGINT during timeout: http://unix.stackexchange.com/a/57692
+    if [[ $WAITFORIT_QUIET -eq 1 ]]; then
+        timeout $WAITFORIT_BUSYTIMEFLAG $WAITFORIT_TIMEOUT $0 --quiet --child --host=$WAITFORIT_HOST --port=$WAITFORIT_PORT --timeout=$WAITFORIT_TIMEOUT &
+    else
+        timeout $WAITFORIT_BUSYTIMEFLAG $WAITFORIT_TIMEOUT $0 --child --host=$WAITFORIT_HOST --port=$WAITFORIT_PORT --timeout=$WAITFORIT_TIMEOUT &
+    fi
+    WAITFORIT_PID=$!
+    trap "kill -INT -$WAITFORIT_PID" INT
+    wait $WAITFORIT_PID
+    WAITFORIT_RESULT=$?
+    if [[ $WAITFORIT_RESULT -ne 0 ]]; then
+        echoerr "$WAITFORIT_cmdname: timeout occurred after waiting $WAITFORIT_TIMEOUT seconds for $WAITFORIT_HOST:$WAITFORIT_PORT"
+    fi
+    return $WAITFORIT_RESULT
+}
+
+# process arguments
+while [[ $# -gt 0 ]]
+do
+    case "$1" in
+        *:* )
+        WAITFORIT_hostport=(${1//:/ })
+        WAITFORIT_HOST=${WAITFORIT_hostport[0]}
+        WAITFORIT_PORT=${WAITFORIT_hostport[1]}
+        shift 1
+        ;;
+        --child)
+        WAITFORIT_CHILD=1
+        shift 1
+        ;;
+        -q | --quiet)
+        WAITFORIT_QUIET=1
+        shift 1
+        ;;
+        -s | --strict)
+        WAITFORIT_STRICT=1
+        shift 1
+        ;;
+        -h)
+        WAITFORIT_HOST="$2"
+        if [[ $WAITFORIT_HOST == "" ]]; then break; fi
+        shift 2
+        ;;
+        --host=*)
+        WAITFORIT_HOST="${1#*=}"
+        shift 1
+        ;;
+        -p)
+        WAITFORIT_PORT="$2"
+        if [[ $WAITFORIT_PORT == "" ]]; then break; fi
+        shift 2
+        ;;
+        --port=*)
+        WAITFORIT_PORT="${1#*=}"
+        shift 1
+        ;;
+        -t)
+        WAITFORIT_TIMEOUT="$2"
+        if [[ $WAITFORIT_TIMEOUT == "" ]]; then break; fi
+        shift 2
+        ;;
+        --timeout=*)
+        WAITFORIT_TIMEOUT="${1#*=}"
+        shift 1
+        ;;
+        --)
+        shift
+        WAITFORIT_CLI=("$@")
+        break
+        ;;
+        --help)
+        usage
+        ;;
+        *)
+        echoerr "Unknown argument: $1"
+        usage
+        ;;
+    esac
+done
+
+if [[ "$WAITFORIT_HOST" == "" || "$WAITFORIT_PORT" == "" ]]; then
+    echoerr "Error: you need to provide a host and port to test."
+    usage
+fi
+
+WAITFORIT_TIMEOUT=${WAITFORIT_TIMEOUT:-15}
+WAITFORIT_STRICT=${WAITFORIT_STRICT:-0}
+WAITFORIT_CHILD=${WAITFORIT_CHILD:-0}
+WAITFORIT_QUIET=${WAITFORIT_QUIET:-0}
+
+# Check to see if timeout is from busybox?
+WAITFORIT_TIMEOUT_PATH=$(type -p timeout)
+WAITFORIT_TIMEOUT_PATH=$(realpath $WAITFORIT_TIMEOUT_PATH 2>/dev/null || readlink -f $WAITFORIT_TIMEOUT_PATH)
+
+WAITFORIT_BUSYTIMEFLAG=""
+if [[ $WAITFORIT_TIMEOUT_PATH =~ "busybox" ]]; then
+    WAITFORIT_ISBUSY=1
+    # Check if busybox timeout uses -t flag
+    # (recent Alpine versions don't support -t anymore)
+    if timeout &>/dev/stdout | grep -q -e '-t '; then
+        WAITFORIT_BUSYTIMEFLAG="-t"
+    fi
+else
+    WAITFORIT_ISBUSY=0
+fi
+
+if [[ $WAITFORIT_CHILD -gt 0 ]]; then
+    wait_for
+    WAITFORIT_RESULT=$?
+    exit $WAITFORIT_RESULT
+else
+    if [[ $WAITFORIT_TIMEOUT -gt 0 ]]; then
+        wait_for_wrapper
+        WAITFORIT_RESULT=$?
+    else
+        wait_for
+        WAITFORIT_RESULT=$?
+    fi
+fi
+
+if [[ $WAITFORIT_CLI != "" ]]; then
+    if [[ $WAITFORIT_RESULT -ne 0 && $WAITFORIT_STRICT -eq 1 ]]; then
+        echoerr "$WAITFORIT_cmdname: strict mode, refusing to execute subprocess"
+        exit $WAITFORIT_RESULT
+    fi
+    exec "${WAITFORIT_CLI[@]}"
+else
+    exit $WAITFORIT_RESULT
+fi
+