2.1.2 ----- Bugfix ~~~~~~ - When expose_tracebacks is enabled waitress would fail to properly encode unicode thereby causing another error during error handling. See https://github.com/Pylons/waitress/pull/378 - Header length checking had a calculation that was done incorrectly when the data was received across multple socket reads. This calculation has been corrected, and no longer will Waitress send back a 413 Request Entity Too Large. See https://github.com/Pylons/waitress/pull/376 Security Bugfix ~~~~~~~~~~~~~~~ - in 2.1.0 a new feature was introduced that allowed the WSGI thread to start sending data to the socket. However this introduced a race condition whereby a socket may be closed in the sending thread while the main thread is about to call select() therey causing the entire application to be taken down. Waitress will no longer close the socket in the WSGI thread, instead waking up the main thread to cleanup. See https://github.com/Pylons/waitress/pull/377 2.1.1 ----- Security Bugfix ~~~~~~~~~~~~~~~ - Waitress now validates that chunked encoding extensions are valid, and don't contain invalid characters that are not allowed. They are still skipped/not processed, but if they contain invalid data we no longer continue in and return a 400 Bad Request. This stops potential HTTP desync/HTTP request smuggling. Thanks to Zhang Zeyu for reporting this issue. See https://github.com/Pylons/waitress/security/advisories/GHSA-4f7p-27jc-3c36 - Waitress now validates that the chunk length is only valid hex digits when parsing chunked encoding, and values such as ``0x01`` and ``+01`` are no longer supported. This stops potential HTTP desync/HTTP request smuggling. Thanks to Zhang Zeyu for reporting this issue. See https://github.com/Pylons/waitress/security/advisories/GHSA-4f7p-27jc-3c36 - Waitress now validates that the Content-Length sent by a remote contains only digits in accordance with RFC7230 and will return a 400 Bad Request when the Content-Length header contains invalid data, such as ``+10`` which would previously get parsed as ``10`` and accepted. This stops potential HTTP desync/HTTP request smuggling Thanks to Zhang Zeyu for reporting this issue. See https://github.com/Pylons/waitress/security/advisories/GHSA-4f7p-27jc-3c36 2.1.0 ----- Python Version Support ~~~~~~~~~~~~~~~~~~~~~~ - Python 3.6 is no longer supported by Waitress - Python 3.10 is fully supported by Waitress Bugfix ~~~~~~ - ``wsgi.file_wrapper`` now sets the ``seekable``, ``seek``, and ``tell`` attributes from the underlying file if the underlying file is seekable. This allows WSGI middleware to implement things like range requests for example See https://github.com/Pylons/waitress/issues/359 and https://github.com/Pylons/waitress/pull/363 - In Python 3 ``OSError`` is no longer subscriptable, this caused failures on Windows attempting to loop to find an socket that would work for use in the trigger. See https://github.com/Pylons/waitress/pull/361 - Fixed an issue whereby ``BytesIO`` objects were not properly closed, and thereby would not get cleaned up until garbage collection would get around to it. This led to potential for random memory spikes/memory issues, see https://github.com/Pylons/waitress/pull/358 and https://github.com/Pylons/waitress/issues/357 . With thanks to Florian Schulze for testing/vaidating this fix! Features ~~~~~~~~ - When the WSGI app starts sending data to the output buffer, we now attempt to send data directly to the socket. This avoids needing to wake up the main thread to start sending data. Allowing faster transmission of the first byte. See https://github.com/Pylons/waitress/pull/364 With thanks to Michael Merickel for being a great rubber ducky! - Add REQUEST_URI to the WSGI environment. REQUEST_URI is similar to ``request_uri`` in nginx. It is a string that contains the request path before separating the query string and decoding ``%``-escaped characters. 2.0.0 (2021-03-07) ------------------ Friendly Reminder ~~~~~~~~~~~~~~~~~ This release still contains a variety of deprecation notices about defaults that can be set for a variety of options. Please note that this is your last warning, and you should update your configuration if you do NOT want to use the new defaults. See the arguments documentation page for all supported options, and pay attention to the warnings: https://docs.pylonsproject.org/projects/waitress/en/stable/arguments.html Without further ado, here's a short list of great changes thanks to our contributors! Bugfixes/Features ~~~~~~~~~~~~~~~~~ - Fix a crash on startup when listening to multiple interfaces. See https://github.com/Pylons/waitress/pull/332 - Waitress no longer attempts to guess at what the ``server_name`` should be for a listen socket, instead it always use a new adjustment/argument named ``server_name``. Please see the documentation for ``server_name`` in https://docs.pylonsproject.org/projects/waitress/en/latest/arguments.html and see https://github.com/Pylons/waitress/pull/329 - Allow tasks to notice if the client disconnected. This inserts a callable ``waitress.client_disconnected`` into the environment that allows the task to check if the client disconnected while waiting for the response at strategic points in the execution and to cancel the operation. It requires setting the new adjustment ``channel_request_lookahead`` to a value larger than 0, which continues to read requests from a channel even if a request is already being processed on that channel, up to the given count, since a client disconnect is detected by reading from a readable socket and receiving an empty result. See https://github.com/Pylons/waitress/pull/310 - Drop Python 2.7 and 3.5 support - The server now issues warning output when it there are enough open connections (controlled by "connection_limit"), that it is no longer accepting new connections. This situation was previously difficult to diagnose. See https://github.com/Pylons/waitress/pull/322 1.4.4 (2020-06-01) ------------------ - Fix an issue with keep-alive connections in which memory usage was higher than expected because output buffers were being reused across requests on a long-lived connection and each buffer would not be freed until it was full or the connection was closed. Buffers are now rotated per-request to stabilize their behavior. See https://github.com/Pylons/waitress/pull/300 - Waitress threads have been updated to contain their thread number. This will allow loggers that use that information to print the thread that the log is coming from. See https://github.com/Pylons/waitress/pull/302 1.4.3 (2020-02-02) ------------------ Security Fixes ~~~~~~~~~~~~~~ - In Waitress version 1.4.2 a new regular expression was added to validate the headers that Waitress receives to make sure that it matches RFC7230. Unfortunately the regular expression was written in a way that with invalid input it leads to catastrophic backtracking which allows for a Denial of Service and CPU usage going to a 100%. This was reported by Fil Zembowicz to the Pylons Project. Please see https://github.com/Pylons/waitress/security/advisories/GHSA-73m2-3pwg-5fgc for more information. 1.4.2 (2020-01-02) ------------------ Security Fixes ~~~~~~~~~~~~~~ - This is a follow-up to the fix introduced in 1.4.1 to tighten up the way Waitress strips whitespace from header values. This makes sure Waitress won't accidentally treat non-printable characters as whitespace and lead to a potental HTTP request smuggling/splitting security issue. Thanks to ZeddYu Lu for the extra test cases. Please see the security advisory for more information: https://github.com/Pylons/waitress/security/advisories/GHSA-m5ff-3wj3-8ph4 CVE-ID: CVE-2019-16789 Bugfixes ~~~~~~~~ - Updated the regex used to validate header-field content to match the errata that was published for RFC7230. See: https://www.rfc-editor.org/errata_search.php?rfc=7230&eid=4189 1.4.1 (2019-12-24) ------------------ Security Fixes ~~~~~~~~~~~~~~ - Waitress did not properly validate that the HTTP headers it received were properly formed, thereby potentially allowing a front-end server to treat a request different from Waitress. This could lead to HTTP request smuggling/splitting. Please see the security advisory for more information: https://github.com/Pylons/waitress/security/advisories/GHSA-m5ff-3wj3-8ph4 CVE-ID: CVE-2019-16789 1.4.0 (2019-12-20) ------------------ Bugfixes ~~~~~~~~ - Waitress used to slam the door shut on HTTP pipelined requests without setting the ``Connection: close`` header as appropriate in the response. This is of course not very friendly. Waitress now explicitly sets the header when responding with an internally generated error such as 400 Bad Request or 500 Internal Server Error to notify the remote client that it will be closing the connection after the response is sent. - Waitress no longer allows any spaces to exist between the header field-name and the colon. While waitress did not strip the space and thereby was not vulnerable to any potential header field-name confusion, it should have sent back a 400 Bad Request. See https://github.com/Pylons/waitress/issues/273 Security Fixes ~~~~~~~~~~~~~~ - Waitress implemented a "MAY" part of the RFC7230 (https://tools.ietf.org/html/rfc7230#section-3.5) which states: Although the line terminator for the start-line and header fields is the sequence CRLF, a recipient MAY recognize a single LF as a line terminator and ignore any preceding CR. Unfortunately if a front-end server does not parse header fields with an LF the same way as it does those with a CRLF it can lead to the front-end and the back-end server parsing the same HTTP message in two different ways. This can lead to a potential for HTTP request smuggling/splitting whereby Waitress may see two requests while the front-end server only sees a single HTTP message. For more information I can highly recommend the blog post by ZeddYu Lu https://blog.zeddyu.info/2019/12/08/HTTP-Smuggling-en/ Please see the security advisory for more information: https://github.com/Pylons/waitress/security/advisories/GHSA-pg36-wpm5-g57p CVE-ID: CVE-2019-16785 - Waitress used to treat LF the same as CRLF in ``Transfer-Encoding: chunked`` requests, while the maintainer doesn't believe this could lead to a security issue, this is no longer supported and all chunks are now validated to be properly framed with CRLF as required by RFC7230. - Waitress now validates that the ``Transfer-Encoding`` header contains only transfer codes that it is able to decode. At the moment that includes the only valid header value being ``chunked``. That means that if the following header is sent: ``Transfer-Encoding: gzip, chunked`` Waitress will send back a 501 Not Implemented with an error message stating as such, as while Waitress supports ``chunked`` encoding it does not support ``gzip`` and it is unable to pass that to the underlying WSGI environment correctly. Waitress DOES NOT implement support for ``Transfer-Encoding: identity`` eventhough ``identity`` was valid in RFC2616, it was removed in RFC7230. Please update your clients to remove the ``Transfer-Encoding`` header if the only transfer coding is ``identity`` or update your client to use ``Transfer-Encoding: chunked`` instead of ``Transfer-Encoding: identity, chunked``. Please see the security advisory for more information: https://github.com/Pylons/waitress/security/advisories/GHSA-g2xc-35jw-c63p CVE-ID: CVE-2019-16786 - While validating the ``Transfer-Encoding`` header, Waitress now properly handles line-folded ``Transfer-Encoding`` headers or those that contain multiple comma seperated values. This closes a potential issue where a front-end server may treat the request as being a chunked request (and thus ignoring the Content-Length) and Waitress using the Content-Length as it was looking for the single value ``chunked`` and did not support comma seperated values. - Waitress used to explicitly set the Content-Length header to 0 if it was unable to parse it as an integer (for example if the Content-Length header was sent twice (and thus folded together), or was invalid) thereby allowing for a potential request to be split and treated as two requests by HTTP pipelining support in Waitress. If Waitress is now unable to parse the Content-Length header, a 400 Bad Request is sent back to the client. Please see the security advisory for more information: https://github.com/Pylons/waitress/security/advisories/GHSA-4ppp-gpcr-7qf6 1.3.1 (2019-08-27) ------------------ Bugfixes ~~~~~~~~ - Waitress won't accidentally throw away part of the path if it starts with a double slash (``GET //testing/whatever HTTP/1.0``). WSGI applications will now receive a ``PATH_INFO`` in the environment that contains ``//testing/whatever`` as required. See https://github.com/Pylons/waitress/issues/260 and https://github.com/Pylons/waitress/pull/261 1.3.0 (2019-04-22) ------------------ Deprecations ~~~~~~~~~~~~ - The ``send_bytes`` adjustment now defaults to ``1`` and is deprecated pending removal in a future release. and https://github.com/Pylons/waitress/pull/246 Features ~~~~~~~~ - Add a new ``outbuf_high_watermark`` adjustment which is used to apply backpressure on the ``app_iter`` to avoid letting it spin faster than data can be written to the socket. This stabilizes responses that iterate quickly with a lot of data. See https://github.com/Pylons/waitress/pull/242 - Stop early and close the ``app_iter`` when attempting to write to a closed socket due to a client disconnect. This should notify a long-lived streaming response when a client hangs up. See https://github.com/Pylons/waitress/pull/238 and https://github.com/Pylons/waitress/pull/240 and https://github.com/Pylons/waitress/pull/241 - Adjust the flush to output ``SO_SNDBUF`` bytes instead of whatever was set in the ``send_bytes`` adjustment. ``send_bytes`` now only controls how much waitress will buffer internally before flushing to the kernel, whereas previously it used to also throttle how much data was sent to the kernel. This change enables a streaming ``app_iter`` containing small chunks to still be flushed efficiently. See https://github.com/Pylons/waitress/pull/246 Bugfixes ~~~~~~~~ - Upon receiving a request that does not include HTTP/1.0 or HTTP/1.1 we will no longer set the version to the string value "None". See https://github.com/Pylons/waitress/pull/252 and https://github.com/Pylons/waitress/issues/110 - When a client closes a socket unexpectedly there was potential for memory leaks in which data was written to the buffers after they were closed, causing them to reopen. See https://github.com/Pylons/waitress/pull/239 - Fix the queue depth warnings to only show when all threads are busy. See https://github.com/Pylons/waitress/pull/243 and https://github.com/Pylons/waitress/pull/247 - Trigger the ``app_iter`` to close as part of shutdown. This will only be noticeable for users of the internal server api. In more typical operations the server will die before benefiting from these changes. See https://github.com/Pylons/waitress/pull/245 - Fix a bug in which a streaming ``app_iter`` may never cleanup data that has already been sent. This would cause buffers in waitress to grow without bounds. These buffers now properly rotate and release their data. See https://github.com/Pylons/waitress/pull/242 - Fix a bug in which non-seekable subclasses of ``io.IOBase`` would trigger an exception when passed to the ``wsgi.file_wrapper`` callback. See https://github.com/Pylons/waitress/pull/249 1.2.1 (2019-01-25) ------------------ Bugfixes ~~~~~~~~ - When given an IPv6 address in ``X-Forwarded-For`` or ``Forwarded for=`` waitress was placing the IP address in ``REMOTE_ADDR`` with brackets: ``[2001:db8::0]``, this does not match the requirements in the CGI spec which ``REMOTE_ADDR`` was lifted from. Waitress will now place the bare IPv6 address in ``REMOTE_ADDR``: ``2001:db8::0``. See https://github.com/Pylons/waitress/pull/232 and https://github.com/Pylons/waitress/issues/230 1.2.0 (2019-01-15) ------------------ No changes since the last beta release. Enjoy Waitress! 1.2.0b3 (2019-01-07) -------------------- Bugfixes ~~~~~~~~ - Modified ``clear_untrusted_proxy_headers`` to be usable without a ``trusted_proxy``. https://github.com/Pylons/waitress/pull/228 - Modified ``trusted_proxy_count`` to error when used without a ``trusted_proxy``. https://github.com/Pylons/waitress/pull/228 1.2.0b2 (2019-02-02) -------------------- Bugfixes ~~~~~~~~ - Fixed logic to no longer warn on writes where the output is required to have a body but there may not be any data to be written. Solves issue posted on the Pylons Project mailing list with 1.2.0b1. 1.2.0b1 (2018-12-31) -------------------- Happy New Year! Features ~~~~~~~~ - Setting the ``trusted_proxy`` setting to ``'*'`` (wildcard) will allow all upstreams to be considered trusted proxies, thereby allowing services behind Cloudflare/ELBs to function correctly whereby there may not be a singular IP address that requests are received from. Using this setting is potentially dangerous if your server is also available from anywhere on the internet, and further protections should be used to lock down access to Waitress. See https://github.com/Pylons/waitress/pull/224 - Waitress has increased its support of the X-Forwarded-* headers and includes Forwarded (RFC7239) support. This may be used to allow proxy servers to influence the WSGI environment. See https://github.com/Pylons/waitress/pull/209 This also provides a new security feature when using Waitress behind a proxy in that it is possible to remove untrusted proxy headers thereby making sure that downstream WSGI applications don't accidentally use those proxy headers to make security decisions. The documentation has more information, see the following new arguments: - trusted_proxy_count - trusted_proxy_headers - clear_untrusted_proxy_headers - log_untrusted_proxy_headers (useful for debugging) Be aware that the defaults for these are currently backwards compatible with older versions of Waitress, this will change in a future release of waitress. If you expect to need this behaviour please explicitly set these variables in your configuration, or pin this version of waitress. Documentation: https://docs.pylonsproject.org/projects/waitress/en/latest/reverse-proxy.html - Waitress can now accept a list of sockets that are already pre-bound rather than creating its own to allow for socket activation. Support for init systems/other systems that create said activated sockets is not included. See https://github.com/Pylons/waitress/pull/215 - Server header can be omitted by specifying ``ident=None`` or ``ident=''``. See https://github.com/Pylons/waitress/pull/187 Bugfixes ~~~~~~~~ - Waitress will no longer send Transfer-Encoding or Content-Length for 1xx, 204, or 304 responses, and will completely ignore any message body sent by the WSGI application, making sure to follow the HTTP standard. See https://github.com/Pylons/waitress/pull/166, https://github.com/Pylons/waitress/issues/165, https://github.com/Pylons/waitress/issues/152, and https://github.com/Pylons/waitress/pull/202 Compatibility ~~~~~~~~~~~~~ - Waitress has now "vendored" asyncore into itself as ``waitress.wasyncore``. This is to cope with the eventuality that asyncore will be removed from the Python standard library in 3.8 or so. Documentation ~~~~~~~~~~~~~ - Bring in documentation of paste.translogger from Pyramid. Reorganize and clean up documentation. See https://github.com/Pylons/waitress/pull/205 https://github.com/Pylons/waitress/pull/70 https://github.com/Pylons/waitress/pull/206 1.1.0 (2017-10-10) ------------------ Features ~~~~~~~~ - Waitress now has a __main__ and thus may be called with ``python -mwaitress`` Bugfixes ~~~~~~~~ - Waitress no longer allows lowercase HTTP verbs. This change was made to fall in line with most HTTP servers. See https://github.com/Pylons/waitress/pull/170 - When receiving non-ascii bytes in the request URL, waitress will no longer abruptly close the connection, instead returning a 400 Bad Request. See https://github.com/Pylons/waitress/pull/162 and https://github.com/Pylons/waitress/issues/64 1.0.2 (2017-02-04) ------------------ Features ~~~~~~~~ - Python 3.6 is now officially supported in Waitress Bugfixes ~~~~~~~~ - Add a work-around for libc issue on Linux not following the documented standards. If getnameinfo() fails because of DNS not being available it should return the IP address instead of the reverse DNS entry, however instead getnameinfo() raises. We catch this, and ask getnameinfo() for the same information again, explicitly asking for IP address instead of reverse DNS hostname. See https://github.com/Pylons/waitress/issues/149 and https://github.com/Pylons/waitress/pull/153 1.0.1 (2016-10-22) ------------------ Bugfixes ~~~~~~~~ - IPv6 support on Windows was broken due to missing constants in the socket module. This has been resolved by setting the constants on Windows if they are missing. See https://github.com/Pylons/waitress/issues/138 - A ValueError was raised on Windows when passing a string for the port, on Windows in Python 2 using service names instead of port numbers doesn't work with `getaddrinfo`. This has been resolved by attempting to convert the port number to an integer, if that fails a ValueError will be raised. See https://github.com/Pylons/waitress/issues/139 1.0.0 (2016-08-31) ------------------ Bugfixes ~~~~~~~~ - Removed `AI_ADDRCONFIG` from the call to `getaddrinfo`, this resolves an issue whereby `getaddrinfo` wouldn't return any addresses to `bind` to on hosts where there is no internet connection but localhost is requested to be bound to. See https://github.com/Pylons/waitress/issues/131 for more information. Deprecations ~~~~~~~~~~~~ - Python 2.6 is no longer supported. Features ~~~~~~~~ - IPv6 support - Waitress is now able to listen on multiple sockets, including IPv4 and IPv6. Instead of passing in a host/port combination you now provide waitress with a space delineated list, and it will create as many sockets as required. .. code-block:: python from waitress import serve serve(wsgiapp, listen='0.0.0.0:8080 [::]:9090 *:6543') Security ~~~~~~~~ - Waitress will now drop HTTP headers that contain an underscore in the key when received from a client. This is to stop any possible underscore/dash conflation that may lead to security issues. See https://github.com/Pylons/waitress/pull/80 and https://www.djangoproject.com/weblog/2015/jan/13/security/ 0.9.0 (2016-04-15) ------------------ Deprecations ~~~~~~~~~~~~ - Python 3.2 is no longer supported by Waitress. - Python 2.6 will no longer be supported by Waitress in future releases. Security/Protections ~~~~~~~~~~~~~~~~~~~~ - Building on the changes made in pull request 117, add in checking for line feed/carriage return HTTP Response Splitting in the status line, as well as the key of a header. See https://github.com/Pylons/waitress/pull/124 and https://github.com/Pylons/waitress/issues/122. - Waitress will no longer accept headers or status lines with newline/carriage returns in them, thereby disallowing HTTP Response Splitting. See https://github.com/Pylons/waitress/issues/117 for more information, as well as https://www.owasp.org/index.php/HTTP_Response_Splitting. Bugfixes ~~~~~~~~ - FileBasedBuffer and more important ReadOnlyFileBasedBuffer no longer report False when tested with bool(), instead always returning True, and becoming more iterator like. See: https://github.com/Pylons/waitress/pull/82 and https://github.com/Pylons/waitress/issues/76 - Call prune() on the output buffer at the end of a request so that it doesn't continue to grow without bounds. See https://github.com/Pylons/waitress/issues/111 for more information. 0.8.10 (2015-09-02) ------------------- - Add support for Python 3.4, 3.5b2, and PyPy3. - Use a nonglobal asyncore socket map by default, trying to prevent conflicts with apps and libs that use the asyncore global socket map ala https://github.com/Pylons/waitress/issues/63. You can get the old use-global-socket-map behavior back by passing ``asyncore.socket_map`` to the ``create_server`` function as the ``map`` argument. - Waitress violated PEP 3333 with respect to reraising an exception when ``start_response`` was called with an ``exc_info`` argument. It would reraise the exception even if no data had been sent to the client. It now only reraises the exception if data has actually been sent to the client. See https://github.com/Pylons/waitress/pull/52 and https://github.com/Pylons/waitress/issues/51 - Add a ``docs`` section to tox.ini that, when run, ensures docs can be built. - If an ``application`` value of ``None`` is supplied to the ``create_server`` constructor function, a ValueError is now raised eagerly instead of an error occuring during runtime. See https://github.com/Pylons/waitress/pull/60 - Fix parsing of multi-line (folded) headers. See https://github.com/Pylons/waitress/issues/53 and https://github.com/Pylons/waitress/pull/90 - Switch from the low level Python thread/_thread module to the threading module. - Improved exception information should module import go awry. 0.8.9 (2014-05-16) ------------------ - Fix tests under Windows. NB: to run tests under Windows, you cannot run "setup.py test" or "setup.py nosetests". Instead you must run ``python.exe -c "import nose; nose.main()"``. If you try to run the tests using the normal method under Windows, each subprocess created by the test suite will attempt to run the test suite again. See https://github.com/nose-devs/nose/issues/407 for more information. - Give the WSGI app_iter generated when ``wsgi.file_wrapper`` is used (ReadOnlyFileBasedBuffer) a ``close`` method. Do not call ``close`` on an instance of such a class when it's used as a WSGI app_iter, however. This is part of a fix which prevents a leakage of file descriptors; the other part of the fix was in WebOb (https://github.com/Pylons/webob/commit/951a41ce57bd853947f842028bccb500bd5237da). - Allow trusted proxies to override ``wsgi.url_scheme`` via a request header, ``X_FORWARDED_PROTO``. Allows proxies which serve mixed HTTP / HTTPS requests to control signal which are served as HTTPS. See https://github.com/Pylons/waitress/pull/42. 0.8.8 (2013-11-30) ------------------ - Fix some cases where the creation of extremely large output buffers (greater than 2GB, suspected to be buffers added via ``wsgi.file_wrapper``) might cause an OverflowError on Python 2. See https://github.com/Pylons/waitress/issues/47. - When the ``url_prefix`` adjustment starts with more than one slash, all slashes except one will be stripped from its beginning. This differs from older behavior where more than one leading slash would be preserved in ``url_prefix``. - If a client somehow manages to send an empty path, we no longer convert the empty path to a single slash in ``PATH_INFO``. Instead, the path remains empty. According to RFC 2616 section "5.1.2 Request-URI", the scenario of a client sending an empty path is actually not possible because the request URI portion cannot be empty. - If the ``url_prefix`` adjustment matches the request path exactly, we now compute ``SCRIPT_NAME`` and ``PATH_INFO`` properly. Previously, if the ``url_prefix`` was ``/foo`` and the path received from a client was ``/foo``, we would set *both* ``SCRIPT_NAME`` and ``PATH_INFO`` to ``/foo``. This was incorrect. Now in such a case we set ``PATH_INFO`` to the empty string and we set ``SCRIPT_NAME`` to ``/foo``. Note that the change we made has no effect on paths that do not match the ``url_prefix`` exactly (such as ``/foo/bar``); these continue to operate as they did. See https://github.com/Pylons/waitress/issues/46 - Preserve header ordering of headers with the same name as per RFC 2616. See https://github.com/Pylons/waitress/pull/44 - When waitress receives a ``Transfer-Encoding: chunked`` request, we no longer send the ``TRANSFER_ENCODING`` nor the ``HTTP_TRANSFER_ENCODING`` value to the application in the environment. Instead, we pop this header. Since we cope with chunked requests by buffering the data in the server, we also know when a chunked request has ended, and therefore we know the content length. We set the content-length header in the environment, such that applications effectively never know the original request was a T-E: chunked request; it will appear to them as if the request is a non-chunked request with an accurate content-length. - Cope with the fact that the ``Transfer-Encoding`` value is case-insensitive. - When the ``--unix-socket-perms`` option was used as an argument to ``waitress-serve``, a ``TypeError`` would be raised. See https://github.com/Pylons/waitress/issues/50. 0.8.7 (2013-08-29) ------------------ - The HTTP version of the response returned by waitress when it catches an exception will now match the HTTP request version. - Fix: CONNECTION header will be HTTP_CONNECTION and not CONNECTION_TYPE (see https://github.com/Pylons/waitress/issues/13) 0.8.6 (2013-08-12) ------------------ - Do alternate type of checking for UNIX socket support, instead of checking for platform == windows. - Functional tests now use multiprocessing module instead of subprocess module, speeding up test suite and making concurrent execution more reliable. - Runner now appends the current working directory to ``sys.path`` to support running WSGI applications from a directory (i.e., not installed in a virtualenv). - Add a ``url_prefix`` adjustment setting. You can use it by passing ``script_name='/foo'`` to ``waitress.serve`` or you can use it in a ``PasteDeploy`` ini file as ``script_name = /foo``. This will cause the WSGI ``SCRIPT_NAME`` value to be the value passed minus any trailing slashes you add, and it will cause the ``PATH_INFO`` of any request which is prefixed with this value to be stripped of the prefix. You can use this instead of PasteDeploy's ``prefixmiddleware`` to always prefix the path. 0.8.5 (2013-05-27) ------------------ - Fix runner multisegment imports in some Python 2 revisions (see https://github.com/Pylons/waitress/pull/34). - For compatibility, WSGIServer is now an alias of TcpWSGIServer. The signature of BaseWSGIServer is now compatible with WSGIServer pre-0.8.4. 0.8.4 (2013-05-24) ------------------ - Add a command-line runner called ``waitress-serve`` to allow Waitress to run WSGI applications without any addional machinery. This is essentially a thin wrapper around the ``waitress.serve()`` function. - Allow parallel testing (e.g., under ``detox`` or ``nosetests --processes``) using PID-dependent port / socket for functest servers. - Fix integer overflow errors on large buffers. Thanks to Marcin Kuzminski for the patch. See: https://github.com/Pylons/waitress/issues/22 - Add support for listening on Unix domain sockets. 0.8.3 (2013-04-28) ------------------ Features ~~~~~~~~ - Add an ``asyncore_loop_timeout`` adjustment value, which controls the ``timeout`` value passed to ``asyncore.loop``; defaults to 1. Bug Fixes ~~~~~~~~~ - The default asyncore loop timeout is now 1 second. This prevents slow shutdown on Windows. See https://github.com/Pylons/waitress/issues/6 . This shouldn't matter to anyone in particular, but it can be changed via the ``asyncore_loop_timeout`` adjustment (it used to previously default to 30 seconds). - Don't complain if there's a response to a HEAD request that contains a Content-Length > 0. See https://github.com/Pylons/waitress/pull/7. - Fix bug in HTTP Expect/Continue support. See https://github.com/Pylons/waitress/issues/9 . 0.8.2 (2012-11-14) ------------------ Bug Fixes ~~~~~~~~~ - https://corte.si/posts/code/pathod/pythonservers/index.html pointed out that sending a bad header resulted in an exception leading to a 500 response instead of the more proper 400 response without an exception. - Fix a race condition in the test suite. - Allow "ident" to be used as a keyword to ``serve()`` as per docs. - Add py33 to tox.ini. 0.8.1 (2012-02-13) ------------------ Bug Fixes ~~~~~~~~~ - A brown-bag bug prevented request concurrency. A slow request would block subsequent the responses of subsequent requests until the slow request's response was fully generated. This was due to a "task lock" being declared as a class attribute rather than as an instance attribute on HTTPChannel. Also took the opportunity to move another lock named "outbuf lock" to the channel instance rather than the class. See https://github.com/Pylons/waitress/pull/1 . 0.8 (2012-01-31) ---------------- Features ~~~~~~~~ - Support the WSGI ``wsgi.file_wrapper`` protocol as per https://www.python.org/dev/peps/pep-0333/#optional-platform-specific-file-handling. Here's a usage example:: import os here = os.path.dirname(os.path.abspath(__file__)) def myapp(environ, start_response): f = open(os.path.join(here, 'myphoto.jpg'), 'rb') headers = [('Content-Type', 'image/jpeg')] start_response( '200 OK', headers ) return environ['wsgi.file_wrapper'](f, 32768) The signature of the file wrapper constructor is ``(filelike_object, block_size)``. Both arguments must be passed as positional (not keyword) arguments. The result of creating a file wrapper should be **returned** as the ``app_iter`` from a WSGI application. The object passed as ``filelike_object`` to the wrapper must be a file-like object which supports *at least* the ``read()`` method, and the ``read()`` method must support an optional size hint argument. It *should* support the ``seek()`` and ``tell()`` methods. If it does not, normal iteration over the filelike object using the provided block_size is used (and copying is done, negating any benefit of the file wrapper). It *should* support a ``close()`` method. The specified ``block_size`` argument to the file wrapper constructor will be used only when the ``filelike_object`` doesn't support ``seek`` and/or ``tell`` methods. Waitress needs to use normal iteration to serve the file in this degenerate case (as per the WSGI spec), and this block size will be used as the iteration chunk size. The ``block_size`` argument is optional; if it is not passed, a default value``32768`` is used. Waitress will set a ``Content-Length`` header on the behalf of an application when a file wrapper with a sufficiently filelike object is used if the application hasn't already set one. The machinery which handles a file wrapper currently doesn't do anything particularly special using fancy system calls (it doesn't use ``sendfile`` for example); using it currently just prevents the system from needing to copy data to a temporary buffer in order to send it to the client. No copying of data is done when a WSGI app returns a file wrapper that wraps a sufficiently filelike object. It may do something fancier in the future. 0.7 (2012-01-11) ---------------- Features ~~~~~~~~ - Default ``send_bytes`` value is now 18000 instead of 9000. The larger default value prevents asyncore from needing to execute select so many times to serve large files, speeding up file serving by about 15%-20% or so. This is probably only an optimization for LAN communications, and could slow things down across a WAN (due to higher TCP overhead), but we're likely to be behind a reverse proxy on a LAN anyway if in production. - Added an (undocumented) profiling feature to the ``serve()`` command. 0.6.1 (2012-01-08) ------------------ Bug Fixes ~~~~~~~~~ - Remove performance-sapping call to ``pull_trigger`` in the channel's ``write_soon`` method added mistakenly in 0.6. 0.6 (2012-01-07) ---------------- Bug Fixes ~~~~~~~~~ - A logic error prevented the internal outbuf buffer of a channel from being flushed when the client could not accept the entire contents of the output buffer in a single succession of socket.send calls when the channel was in a "pending close" state. The socket in such a case would be closed prematurely, sometimes resulting in partially delivered content. This was discovered by a user using waitress behind an Nginx reverse proxy, which apparently is not always ready to receive data. The symptom was that he received "half" of a large CSS file (110K) while serving content via waitress behind the proxy. 0.5 (2012-01-03) ---------------- Bug Fixes ~~~~~~~~~ - Fix PATH_INFO encoding/decoding on Python 3 (as per PEP 3333, tunnel bytes-in-unicode-as-latin-1-after-unquoting). 0.4 (2012-01-02) ---------------- Features ~~~~~~~~ - Added "design" document to docs. Bug Fixes ~~~~~~~~~ - Set default ``connection_limit`` back to 100 for benefit of maximal platform compatibility. - Normalize setting of ``last_activity`` during send. - Minor resource cleanups during tests. - Channel timeout cleanup was broken. 0.3 (2012-01-02) ---------------- Features ~~~~~~~~ - Dont hang a thread up trying to send data to slow clients. - Use self.logger to log socket errors instead of self.log_info (normalize). - Remove pointless handle_error method from channel. - Queue requests instead of tasks in a channel. Bug Fixes ~~~~~~~~~ - Expect: 100-continue responses were broken. 0.2 (2011-12-31) ---------------- Bug Fixes ~~~~~~~~~ - Set up logging by calling logging.basicConfig() when ``serve`` is called (show tracebacks and other warnings to console by default). - Disallow WSGI applications to set "hop-by-hop" headers (Connection, Transfer-Encoding, etc). - Don't treat 304 status responses specially in HTTP/1.1 mode. - Remove out of date ``interfaces.py`` file. - Normalize logging (all output is now sent to the ``waitress`` logger rather than in degenerate cases some output being sent directly to stderr). Features ~~~~~~~~ - Support HTTP/1.1 ``Transfer-Encoding: chunked`` responses. - Slightly better docs about logging. 0.1 (2011-12-30) ---------------- - Initial release.