/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:FDL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Free Documentation License ** Alternatively, this file may be used under the terms of the GNU Free ** Documentation License version 1.3 as published by the Free Software ** Foundation and appearing in the file included in the packaging of this ** file. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \page usingadaptors.html \title Using QtDBus Adaptors \brief How to create and use DBus adaptors in Qt. \ingroup best-practices Adaptors are special classes that are attached to any QObject-derived class and provide the interface to the external world using D-Bus. Adaptors are intended to be lightweight classes whose main purpose is to relay calls to and from the real object, possibly validating or converting the input from the external world and, thus, protecting the real object. Unlike multiple inheritance, adaptors can be added at any time to any object (but not removed), which allows for greater flexibility when exporting existing classes. Another advantage of adaptors is to provide similar but not identical functionality in methods of the same name in different interfaces, a case which can be quite common when adding a new version of a standard interface to an object. In order to use an adaptor, one must create a class which inherits QDBusAbstractAdaptor. Since that is a standard QObject-derived class, the Q_OBJECT macro must appear in the declaration and the source file must be processed with the \l {moc} tool. The class must also contain one Q_CLASSINFO entry with the \c {"D-Bus Interface"} name, declaring which interface it is exporting. Only one entry per class is supported. Any public slot in the class will be accessible through the bus over messages of the MethodCall type. (See \l {Declaring Slots in D-Bus Adaptors} for more information). Signals in the class will be automatically relayed over D-Bus. However, not all types are allowed signals or slots' parameter lists: see \l {The QtDBus Type System} for more information. Also, any property declared with Q_PROPERTY will be automatically exposed over the Properties interface on D-Bus. Since the QObject property system does not allow for non-readable properties, it is not possible to declare write-only properties using adaptors. More information: \list \o \l{Declaring Slots in D-Bus Adaptors} \o \l{Declaring Signals in D-Bus Adaptors} \o \l{The QtDBus Type System} \o \l{D-Bus Adaptor Example} \endlist \sa QDBusAbstractAdaptor */ /*! \page qdbusadaptorexample.html \title D-Bus Adaptor Example \previouspage The QtDBus Type System \contentspage Using QtDBus Adaptors The following example code shows how a D-Bus interface can be implemented using an adaptor. A sample usage of QDBusAbstractAdaptor is as follows: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 0 The code above would create an interface that could be represented more or less in the following canonical representation: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 1 This adaptor could be used in the application's main function as follows \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 2 Break-down analysis: \tableofcontents \section1 The header The header of the example is: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 3 The code does the following: \list \o it declares the adaptor MainApplicationAdaptor, which descends from QDBusAbstractAdaptor \o it declares the Qt meta-object data using the Q_OBJECT macro \o it declares the name of the D-Bus interface it implements. \endlist \section1 The properties The properties are declared as follows: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 4 And are implemented as follows: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 5 The code declares three properties: one of them is a read-write property called "caption" of string type. The other two are read-only, also of the string type. The properties organizationName and organizationDomain are simple relays of the app object's organizationName and organizationDomain properties. However, the caption property requires verifying if the application has a main window associated with it: if there isn't any, the caption property is empty. Note how it is possible to access data defined in other objects through the getter/setter functions. \section1 The constructor The constructor: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 6 The constructor does the following: \list \o it initialises its base class (QDBusAbstractAdaptor) with the parent object it is related to. \o it stores the app pointer in a member variable. Note that it would be possible to access the same object using the QDBusAbstractAdaptor::object() function, but it would be necessary to use \a static_cast<> to properly access the methods in QApplication that are not part of QObject. \o it connects the application's signal \a aboutToQuit to its own signal \a aboutToQuit. \o it connects the application's signal \a focusChanged to a private slot to do some further processing before emitting a D-Bus signal. \endlist Note that there is no destructor in the example. An eventual destructor could be used to emit one last signal before the object is destroyed, for instance. \section1 Slots/methods The public slots in the example (which will be exported as D-Bus methods) are the following: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 7 This snippet of code defines 4 methods with different properties each: \list 1 \o \c quit: this method takes no parameters and is defined to be asynchronous. That is, callers are expected to use "fire-and-forget" mechanism when calling this method, since it provides no useful reply. This is represented in D-Bus by the use of the org.freedesktop.DBus.Method.NoReply annotation. See \l Q_NOREPLY for more information on asynchronous methods \o \c reparseConfiguration: this simple method, with no input or output arguments simply relays the call to the application's reparseConfiguration member function. \o \c mainWindowObject: this method takes no input parameter, but returns one string output argument, containing the path to the main window object (if the application has a main window), or an empty string if it has no main window. Note that this method could have also been written: void mainWindowObject(QString &path). \o \c setSessionManagement: this method takes one input argument (a boolean) and, depending on its value, it calls one function or another in the application. \endlist See also: \l Q_NOREPLY. \section1 Signals The signals in this example are defined as follows: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 8 However, signal definition isn't enough: signals have to be emitted. One simple way of emitting signals is to connect another signal to them, so that Qt's signal handling system chains them automatically. This is what is done for the \a aboutToQuit signal. When this is the case, one can use the QDBusAbstractAdaptor::setAutoRelaySignals to automatically connect every signal from the real object to the adaptor. When simple signal-to-signal connection isn't enough, one can use a private slot do do some work. This is what was done for the mainWindowHasFocus signal: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 9 This private slot (which will not be exported as a method via D-Bus) was connected to the \c focusChanged signal in the adaptor's constructor. It is therefore able to shape the application's signal into what the interface expects it to be. */ /*! \page qdbusdeclaringslots.html \title Declaring Slots in D-Bus Adaptors \contentspage Using QtDBus Adaptors \nextpage Declaring Signals in D-Bus Adaptors Slots in D-Bus adaptors are declared just like normal, public slots, but their parameters must follow certain rules (see \l{The QtDBus Type System} for more information). Slots whose parameters do not follow those rules or that are not public will not be accessible via D-Bus. Slots can have one parameter of type \c{const QDBusMessage &}, which must appear at the end of the input parameter list, before any output parameters. This parameter, if present, will be initialized with a copy of the current message being processed, which allows the callee to obtain information about the caller, such as its connection name. Slots can be of three kinds: \list 1 \o Asynchronous \o Input-only \o Input-and-output \endlist \section1 Asynchronous Slots Asynchronous slots are those that do not normally return any reply to the caller. For that reason, they cannot take any output parameters. In most cases, by the time the first line of the slot is run, the caller function has already resumed working. However, slots must not rely on that behavior. Scheduling and message-dispatching issues could change the order in which the slot is run. Code intending to synchronize with the caller should provide its own method of synchronization. Asynchronous slots are marked by the keyword \l Q_NOREPLY in the method signature, before the \c void return type and the slot name. (See the \c quit() slot in the \l{D-Bus Adaptor Example}). \section1 Input-Only Slots Input-only slots are normal slots that take parameters passed by value or by constant reference. However, unlike asynchronous slots, the caller is usually waiting for completion of the callee before resuming operation. Therefore, non-asynchronous slots should not block or should state it its documentation that they may do so. Input-only slots have no special marking in their signature, except that they take only parameters passed by value or by constant reference. Optionally, slots can take a QDBusMessage parameter as a last parameter, which can be used to perform additional analysis of the method call message. \section1 Input and Output Slots Like input-only slots, input-and-output slots are those that the caller is waiting for a reply. Unlike input-only ones, though, this reply will contain data. Slots that output data may contain non-constant references and may return a value as well. However, the output parameters must all appear at the end of the argument list and may not have input arguments interleaved. Optionally, a QDBusMessage argument may appear between the input and the output arguments. \section1 Automatic Replies Method replies are generated automatically with the contents of the output parameters (if there were any) by the QtDBus implementation. Slots need not worry about constructing proper QDBusMessage objects and sending them over the connection. However, the possibility of doing so remains there. Should the slot find out it needs to send a special reply or even an error, it can do so by using QDBusMessage::createReply() or QDBusMessage::createErrorReply() on the QDBusMessage parameter and send it with QDBusConnection::send(). The QtDBus implementation will not generate any reply if the slot did so. \warning When a caller places a method call and waits for a reply, it will only wait for a limited amount of time. Slots intending to take a long time to complete should make that fact clear in documentation so that callers properly set higher timeouts. \section1 Delayed Replies In some circumstances, the called slot may not be able to process the request immediately. This is frequently the case when the request involves an I/O or networking operation which may block. If this is the case, the slot should return control to the application's main loop to avoid freezing the user interface, and resume the process later. To accomplish this, it should make use of the extra \c QDBusMessage parameter at the end of the input parameter list and request a delayed reply. We do this by writing a slot that stores the request data in a persistent structure, indicating to the caller using \l{QDBusMessage::setDelayedReply()}{QDBusMessage::setDelayedReply(true)} that the response will be sent later. \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 10 The use of \l{QDBusConnection::send()}{QDBusConnection::sessionBus().send(data->reply)} is needed to explicitly inform the caller that the response will be delayed. In this case, the return value is unimportant; we return an arbitrary value to satisfy the compiler. When the request is processed and a reply is available, it should be sent using the \c QDBusMessage object that was obtained. In our example, the reply code could be something as follows: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 11 As can be seen in the example, when a delayed reply is in place, the return value(s) from the slot will be ignored by QtDBus. They are used only to determine the slot's signature when communicating the adaptor's description to remote applications, or in case the code in the slot decides not to use a delayed reply. The delayed reply itself is requested from QtDBus by calling QDBusMessage::reply() on the original message. It then becomes the resposibility of the called code to eventually send a reply to the caller. \warning When a caller places a method call and waits for a reply, it will only wait for a limited amount of time. Slots intending to take a long time to complete should make that fact clear in documentation so that callers properly set higher timeouts. \sa {Using QtDBus Adaptors}, {Declaring Signals in D-Bus Adaptors}, {The QtDBus Type System}, QDBusConnection, QDBusMessage */ /*! \page qdbusdeclaringsignals.html \title Declaring Signals in D-Bus Adaptors \previouspage Declaring Slots in D-Bus Adaptors \contentspage Using QtDBus Adaptors \nextpage The QtDBus Type System Any signal in a class derived from QDBusAbstractAdaptor will be automatically relayed into D-Bus, provided that the signal's parameters conform to certain rules (see \l{The QtDBus Type System} for more information). No special code is necessary to make this relay. However, signals must still be emitted. The easiest way to emit an adaptor signal is to connect another signal to it, so that Qt's signals and slots mechanism automatically emits the adaptor signal, too. This can be done in the adaptor's constructor, as has been done in the \l{D-Bus Adaptor Example}{D-Bus Adaptor example}. The QDBusAbstractAdaptor::setAutoRelaySignals() convenience function can also be used to make and break connections between signals in the real object and the corresponding signals in the adaptor. It will inspect the list of signals in both classes and connect those whose parameters match exactly. \sa {Using QtDBus Adaptors}, {Declaring Slots in D-Bus Adaptors}, {The QtDBus Type System}, QDBusAbstractAdaptor */ /*! \page qdbustypesystem.html \title The QtDBus Type System \previouspage Declaring Signals in D-Bus Adaptors \contentspage Using QtDBus Adaptors \nextpage D-Bus Adaptor Example D-Bus has an extensible type system based on a few primitives and composition of the primitives in arrays and structures. QtDBus implements the interface to that type system through the QDBusArgument class, allowing user programs to send and receive practically every C++ type over the bus. \section1 Primitive Types The primitive types are supported natively by QDBusArgument and need no special customization to be sent or received. They are listed below, along with the C++ class they relate to: \table \header \o Qt type \o D-Bus equivalent type \row \o uchar \o BYTE \row \o bool \o BOOLEAN \row \o short \o INT16 \row \o ushort \o UINT16 \row \o int \o INT32 \row \o uint \o UINT32 \row \o qlonglong \o INT64 \row \o qulonglong \o UINT64 \row \o double \o DOUBLE \row \o QString \o STRING \row \o QDBusVariant \o VARIANT \row \o QDBusObjectPath \o OBJECT_PATH \row \o QDBusSignature \o SIGNATURE \endtable Aside from the primitive types, QDBusArgument also supports two non-primitive types natively, due to their widespread use in Qt applications: QStringList and QByteArray. \section1 Compound Types D-Bus specifies three types of aggregations of primitive types that allow one to create compound types. They are \c ARRAY, \c STRUCT and maps/dictionaries. Arrays are sets of zero or more elements of the same type, while structures are a set of a fixed number of elements, each of any type. Maps or dictionaries are implemented as arrays of a pair of elements, so there can be zero or more elements in one map. \section1 Extending the Type System In order to use one's own type with QtDBus, the type has to be declared as a Qt meta-type with the Q_DECLARE_METATYPE() macro and registered with the qDBusRegisterMetaType() function. The streaming operators \c{operator>>} and \c{operator<<} will be automatically found by the registration system. QtDBus provides template specializations for arrays and maps for use with Qt's \l{Container classes}{container classes}, such as QMap and QList, so it is not necessary to write the streaming operator functions for those. For other types, and specially for types implementing structures, the operators have to be explicitly implemented. See the documentation for QDBusArgument for examples for structures, arrays and maps. \section1 The Type System in Use All of the QtDBus types (primitives and user-defined alike) can be used to send and receive messages of all types over the bus. \warning You may not use any type that is not on the list above, including \a typedefs to the types listed. This also includes QList and QMap. */ /*! \macro Q_NOREPLY \relates QDBusAbstractAdaptor \since 4.2 The Q_NOREPLY macro can be used to mark a method to be called and not wait for it to finish processing before returning from QDBusInterface::call(). The called method cannot return any output arguments and, if it does, any such arguments will be discarded. You can use this macro in your own adaptors by placing it before your method's return value (which must be "void") in the class declaration, as shown in the example: \snippet doc/src/snippets/code/doc_src_qdbusadaptors.qdoc 12 Its presence in the method implementation (outside the class declaration) is optional. \sa {Using QtDBus Adaptors} */