diff options
Diffstat (limited to 'chromium/third_party/sqlite/src/amalgamation/sqlite3.h')
-rw-r--r-- | chromium/third_party/sqlite/src/amalgamation/sqlite3.h | 581 |
1 files changed, 483 insertions, 98 deletions
diff --git a/chromium/third_party/sqlite/src/amalgamation/sqlite3.h b/chromium/third_party/sqlite/src/amalgamation/sqlite3.h index 9b284d2764a..e967249b609 100644 --- a/chromium/third_party/sqlite/src/amalgamation/sqlite3.h +++ b/chromium/third_party/sqlite/src/amalgamation/sqlite3.h @@ -146,9 +146,9 @@ extern "C" { ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.39.4" -#define SQLITE_VERSION_NUMBER 3039004 -#define SQLITE_SOURCE_ID "2022-09-29 15:55:41 a29f9949895322123f7c38fbe94c649a9d6e6c9cd0c3b41c96d694552f26b309" +#define SQLITE_VERSION "3.41.2" +#define SQLITE_VERSION_NUMBER 3041002 +#define SQLITE_SOURCE_ID "2023-03-22 11:56:21 c5a8ed5442668c558f8330bc68beb9e9e6396526f364a63f7a6cb812639aff78" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -563,6 +563,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_CONSTRAINT_DATATYPE (SQLITE_CONSTRAINT |(12<<8)) #define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8)) #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8)) +#define SQLITE_NOTICE_RBU (SQLITE_NOTICE | (3<<8)) #define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8)) #define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8)) #define SQLITE_OK_LOAD_PERMANENTLY (SQLITE_OK | (1<<8)) @@ -670,13 +671,17 @@ SQLITE_API int sqlite3_exec( ** ** SQLite uses one of these integer values as the second ** argument to calls it makes to the xLock() and xUnlock() methods -** of an [sqlite3_io_methods] object. +** of an [sqlite3_io_methods] object. These values are ordered from +** lest restrictive to most restrictive. +** +** The argument to xLock() is always SHARED or higher. The argument to +** xUnlock is either SHARED or NONE. */ -#define SQLITE_LOCK_NONE 0 -#define SQLITE_LOCK_SHARED 1 -#define SQLITE_LOCK_RESERVED 2 -#define SQLITE_LOCK_PENDING 3 -#define SQLITE_LOCK_EXCLUSIVE 4 +#define SQLITE_LOCK_NONE 0 /* xUnlock() only */ +#define SQLITE_LOCK_SHARED 1 /* xLock() or xUnlock() */ +#define SQLITE_LOCK_RESERVED 2 /* xLock() only */ +#define SQLITE_LOCK_PENDING 3 /* xLock() only */ +#define SQLITE_LOCK_EXCLUSIVE 4 /* xLock() only */ /* ** CAPI3REF: Synchronization Type Flags @@ -754,7 +759,14 @@ struct sqlite3_file { ** <li> [SQLITE_LOCK_PENDING], or ** <li> [SQLITE_LOCK_EXCLUSIVE]. ** </ul> -** xLock() increases the lock. xUnlock() decreases the lock. +** xLock() upgrades the database file lock. In other words, xLock() moves the +** database file lock in the direction NONE toward EXCLUSIVE. The argument to +** xLock() is always on of SHARED, RESERVED, PENDING, or EXCLUSIVE, never +** SQLITE_LOCK_NONE. If the database file lock is already at or above the +** requested lock, then the call to xLock() is a no-op. +** xUnlock() downgrades the database file lock to either SHARED or NONE. +* If the lock is already at or below the requested lock state, then the call +** to xUnlock() is a no-op. ** The xCheckReservedLock() method checks whether any database connection, ** either in this process or in some other process, is holding a RESERVED, ** PENDING, or EXCLUSIVE lock on the file. It returns true @@ -859,9 +871,8 @@ struct sqlite3_io_methods { ** opcode causes the xFileControl method to write the current state of ** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED], ** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE]) -** into an integer that the pArg argument points to. This capability -** is used during testing and is only available when the SQLITE_TEST -** compile-time option is used. +** into an integer that the pArg argument points to. +** This capability is only available if SQLite is compiled with [SQLITE_DEBUG]. ** ** <li>[[SQLITE_FCNTL_SIZE_HINT]] ** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS @@ -1165,7 +1176,6 @@ struct sqlite3_io_methods { ** in wal mode after the client has finished copying pages from the wal ** file to the database file, but before the *-shm file is updated to ** record the fact that the pages have been checkpointed. -** </ul> ** ** <li>[[SQLITE_FCNTL_EXTERNAL_READER]] ** The EXPERIMENTAL [SQLITE_FCNTL_EXTERNAL_READER] opcode is used to detect @@ -1178,10 +1188,16 @@ struct sqlite3_io_methods { ** the database is not a wal-mode db, or if there is no such connection in any ** other process. This opcode cannot be used to detect transactions opened ** by clients within the current process, only within other processes. -** </ul> ** ** <li>[[SQLITE_FCNTL_CKSM_FILE]] -** Used by the cksmvfs VFS module only. +** The [SQLITE_FCNTL_CKSM_FILE] opcode is for use interally by the +** [checksum VFS shim] only. +** +** <li>[[SQLITE_FCNTL_RESET_CACHE]] +** If there is currently no transaction open on the database, and the +** database is not a temp db, then the [SQLITE_FCNTL_RESET_CACHE] file-control +** purges the contents of the in-memory page cache. If there is an open +** transaction, or if the db is a temp-db, this opcode is a no-op, not an error. ** </ul> */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -1224,6 +1240,7 @@ struct sqlite3_io_methods { #define SQLITE_FCNTL_CKPT_START 39 #define SQLITE_FCNTL_EXTERNAL_READER 40 #define SQLITE_FCNTL_CKSM_FILE 41 +#define SQLITE_FCNTL_RESET_CACHE 42 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -1254,6 +1271,26 @@ typedef struct sqlite3_mutex sqlite3_mutex; typedef struct sqlite3_api_routines sqlite3_api_routines; /* +** CAPI3REF: File Name +** +** Type [sqlite3_filename] is used by SQLite to pass filenames to the +** xOpen method of a [VFS]. It may be cast to (const char*) and treated +** as a normal, nul-terminated, UTF-8 buffer containing the filename, but +** may also be passed to special APIs such as: +** +** <ul> +** <li> sqlite3_filename_database() +** <li> sqlite3_filename_journal() +** <li> sqlite3_filename_wal() +** <li> sqlite3_uri_parameter() +** <li> sqlite3_uri_boolean() +** <li> sqlite3_uri_int64() +** <li> sqlite3_uri_key() +** </ul> +*/ +typedef const char *sqlite3_filename; + +/* ** CAPI3REF: OS Interface Object ** ** An instance of the sqlite3_vfs object defines the interface between @@ -1431,7 +1468,7 @@ struct sqlite3_vfs { sqlite3_vfs *pNext; /* Next registered VFS */ const char *zName; /* Name of this virtual file system */ void *pAppData; /* Pointer to application-specific data */ - int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*, + int (*xOpen)(sqlite3_vfs*, sqlite3_filename zName, sqlite3_file*, int flags, int *pOutFlags); int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir); int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut); @@ -2147,7 +2184,7 @@ struct sqlite3_mem_methods { ** configuration for a database connection can only be changed when that ** connection is not currently using lookaside memory, or in other words ** when the "current value" returned by -** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero. +** [sqlite3_db_status](D,[SQLITE_DBSTATUS_LOOKASIDE_USED],...) is zero. ** Any attempt to change the lookaside memory configuration when lookaside ** memory is in use leaves the configuration unchanged and returns ** [SQLITE_BUSY].)^</dd> @@ -2297,8 +2334,12 @@ struct sqlite3_mem_methods { ** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0); ** </ol> ** Because resetting a database is destructive and irreversible, the -** process requires the use of this obscure API and multiple steps to help -** ensure that it does not happen by accident. +** process requires the use of this obscure API and multiple steps to +** help ensure that it does not happen by accident. Because this +** feature must be capable of resetting corrupt databases, and +** shutting down virtual tables may require access to that corrupt +** storage, the library must abandon any installed virtual tables +** without calling their xDestroy() methods. ** ** [[SQLITE_DBCONFIG_DEFENSIVE]] <dt>SQLITE_DBCONFIG_DEFENSIVE</dt> ** <dd>The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the @@ -2309,6 +2350,7 @@ struct sqlite3_mem_methods { ** <ul> ** <li> The [PRAGMA writable_schema=ON] statement. ** <li> The [PRAGMA journal_mode=OFF] statement. +** <li> The [PRAGMA schema_version=N] statement. ** <li> Writes to the [sqlite_dbpage] virtual table. ** <li> Direct writes to [shadow tables]. ** </ul> @@ -2636,8 +2678,12 @@ SQLITE_API sqlite3_int64 sqlite3_total_changes64(sqlite3*); ** ^A call to sqlite3_interrupt(D) that occurs when there are no running ** SQL statements is a no-op and has no effect on SQL statements ** that are started after the sqlite3_interrupt() call returns. +** +** ^The [sqlite3_is_interrupted(D)] interface can be used to determine whether +** or not an interrupt is currently in effect for [database connection] D. */ SQLITE_API void sqlite3_interrupt(sqlite3*); +SQLITE_API int sqlite3_is_interrupted(sqlite3*); /* ** CAPI3REF: Determine If An SQL Statement Is Complete @@ -3255,8 +3301,8 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*, ** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same ** information as is provided by the [sqlite3_profile()] callback. ** ^The P argument is a pointer to the [prepared statement] and the -** X argument points to a 64-bit integer which is the estimated of -** the number of nanosecond that the prepared statement took to run. +** X argument points to a 64-bit integer which is approximately +** the number of nanoseconds that the prepared statement took to run. ** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes. ** ** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt> @@ -3319,7 +3365,7 @@ SQLITE_API int sqlite3_trace_v2( ** ** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback ** function X to be invoked periodically during long running calls to -** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for +** [sqlite3_step()] and [sqlite3_prepare()] and similar for ** database connection D. An example use for this ** interface is to keep a GUI updated during a large query. ** @@ -3344,6 +3390,13 @@ SQLITE_API int sqlite3_trace_v2( ** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their ** database connections for the meaning of "modify" in this paragraph. ** +** The progress handler callback would originally only be invoked from the +** bytecode engine. It still might be invoked during [sqlite3_prepare()] +** and similar because those routines might force a reparse of the schema +** which involves running the bytecode engine. However, beginning with +** SQLite version 3.41.0, the progress handler callback might also be +** invoked directly from [sqlite3_prepare()] while analyzing and generating +** code for complex queries. */ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); @@ -3380,13 +3433,18 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** ** <dl> ** ^(<dt>[SQLITE_OPEN_READONLY]</dt> -** <dd>The database is opened in read-only mode. If the database does not -** already exist, an error is returned.</dd>)^ +** <dd>The database is opened in read-only mode. If the database does +** not already exist, an error is returned.</dd>)^ ** ** ^(<dt>[SQLITE_OPEN_READWRITE]</dt> -** <dd>The database is opened for reading and writing if possible, or reading -** only if the file is write protected by the operating system. In either -** case the database must already exist, otherwise an error is returned.</dd>)^ +** <dd>The database is opened for reading and writing if possible, or +** reading only if the file is write protected by the operating +** system. In either case the database must already exist, otherwise +** an error is returned. For historical reasons, if opening in +** read-write mode fails due to OS-level permissions, an attempt is +** made to open it in read-only mode. [sqlite3_db_readonly()] can be +** used to determine whether the database is actually +** read-write.</dd>)^ ** ** ^(<dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt> ** <dd>The database is opened for reading and writing, and is created if @@ -3424,6 +3482,9 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** <dd>The database is opened [shared cache] enabled, overriding ** the default shared cache setting provided by ** [sqlite3_enable_shared_cache()].)^ +** The [use of shared cache mode is discouraged] and hence shared cache +** capabilities may be omitted from many builds of SQLite. In such cases, +** this option is a no-op. ** ** ^(<dt>[SQLITE_OPEN_PRIVATECACHE]</dt> ** <dd>The database is opened [shared cache] disabled, overriding @@ -3439,7 +3500,7 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** to return an extended result code.</dd> ** ** [[OPEN_NOFOLLOW]] ^(<dt>[SQLITE_OPEN_NOFOLLOW]</dt> -** <dd>The database filename is not allowed to be a symbolic link</dd> +** <dd>The database filename is not allowed to contain a symbolic link</dd> ** </dl>)^ ** ** If the 3rd parameter to sqlite3_open_v2() is not one of the @@ -3698,10 +3759,10 @@ SQLITE_API int sqlite3_open_v2( ** ** See the [URI filename] documentation for additional information. */ -SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam); -SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault); -SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64); -SQLITE_API const char *sqlite3_uri_key(const char *zFilename, int N); +SQLITE_API const char *sqlite3_uri_parameter(sqlite3_filename z, const char *zParam); +SQLITE_API int sqlite3_uri_boolean(sqlite3_filename z, const char *zParam, int bDefault); +SQLITE_API sqlite3_int64 sqlite3_uri_int64(sqlite3_filename, const char*, sqlite3_int64); +SQLITE_API const char *sqlite3_uri_key(sqlite3_filename z, int N); /* ** CAPI3REF: Translate filenames @@ -3730,9 +3791,9 @@ SQLITE_API const char *sqlite3_uri_key(const char *zFilename, int N); ** return value from [sqlite3_db_filename()], then the result is ** undefined and is likely a memory access violation. */ -SQLITE_API const char *sqlite3_filename_database(const char*); -SQLITE_API const char *sqlite3_filename_journal(const char*); -SQLITE_API const char *sqlite3_filename_wal(const char*); +SQLITE_API const char *sqlite3_filename_database(sqlite3_filename); +SQLITE_API const char *sqlite3_filename_journal(sqlite3_filename); +SQLITE_API const char *sqlite3_filename_wal(sqlite3_filename); /* ** CAPI3REF: Database File Corresponding To A Journal @@ -3798,14 +3859,14 @@ SQLITE_API sqlite3_file *sqlite3_database_file_object(const char*); ** then the corresponding [sqlite3_module.xClose() method should also be ** invoked prior to calling sqlite3_free_filename(Y). */ -SQLITE_API char *sqlite3_create_filename( +SQLITE_API sqlite3_filename sqlite3_create_filename( const char *zDatabase, const char *zJournal, const char *zWal, int nParam, const char **azParam ); -SQLITE_API void sqlite3_free_filename(char*); +SQLITE_API void sqlite3_free_filename(sqlite3_filename); /* ** CAPI3REF: Error Codes And Messages @@ -5364,10 +5425,21 @@ SQLITE_API int sqlite3_create_window_function( ** from top-level SQL, and cannot be used in VIEWs or TRIGGERs nor in ** schema structures such as [CHECK constraints], [DEFAULT clauses], ** [expression indexes], [partial indexes], or [generated columns]. -** The SQLITE_DIRECTONLY flags is a security feature which is recommended -** for all [application-defined SQL functions], and especially for functions -** that have side-effects or that could potentially leak sensitive -** information. +** <p> +** The SQLITE_DIRECTONLY flag is recommended for any +** [application-defined SQL function] +** that has side-effects or that could potentially leak sensitive information. +** This will prevent attacks in which an application is tricked +** into using a database file that has had its schema surreptiously +** modified to invoke the application-defined function in ways that are +** harmful. +** <p> +** Some people say it is good practice to set SQLITE_DIRECTONLY on all +** [application-defined SQL functions], regardless of whether or not they +** are security sensitive, as doing so prevents those functions from being used +** inside of the database schema, and thus ensures that the database +** can be inspected and modified using generic tools (such as the [CLI]) +** that do not have access to the application-defined functions. ** </dd> ** ** [[SQLITE_INNOCUOUS]] <dt>SQLITE_INNOCUOUS</dt><dd> @@ -5574,6 +5646,28 @@ SQLITE_API int sqlite3_value_nochange(sqlite3_value*); SQLITE_API int sqlite3_value_frombind(sqlite3_value*); /* +** CAPI3REF: Report the internal text encoding state of an sqlite3_value object +** METHOD: sqlite3_value +** +** ^(The sqlite3_value_encoding(X) interface returns one of [SQLITE_UTF8], +** [SQLITE_UTF16BE], or [SQLITE_UTF16LE] according to the current text encoding +** of the value X, assuming that X has type TEXT.)^ If sqlite3_value_type(X) +** returns something other than SQLITE_TEXT, then the return value from +** sqlite3_value_encoding(X) is meaningless. ^Calls to +** [sqlite3_value_text(X)], [sqlite3_value_text16(X)], [sqlite3_value_text16be(X)], +** [sqlite3_value_text16le(X)], [sqlite3_value_bytes(X)], or +** [sqlite3_value_bytes16(X)] might change the encoding of the value X and +** thus change the return from subsequent calls to sqlite3_value_encoding(X). +** +** This routine is intended for used by applications that test and validate +** the SQLite implementation. This routine is inquiring about the opaque +** internal state of an [sqlite3_value] object. Ordinary applications should +** not need to know what the internal state of an sqlite3_value object is and +** hence should not need to use this interface. +*/ +SQLITE_API int sqlite3_value_encoding(sqlite3_value*); + +/* ** CAPI3REF: Finding The Subtype Of SQL Values ** METHOD: sqlite3_value ** @@ -5625,7 +5719,7 @@ SQLITE_API void sqlite3_value_free(sqlite3_value*); ** ** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer ** when first called if N is less than or equal to zero or if a memory -** allocate error occurs. +** allocation error occurs. ** ** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is ** determined by the N parameter on first successful call. Changing the @@ -5830,9 +5924,10 @@ typedef void (*sqlite3_destructor_type)(void*); ** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]. ** ^SQLite takes the text result from the application from ** the 2nd parameter of the sqlite3_result_text* interfaces. -** ^If the 3rd parameter to the sqlite3_result_text* interfaces -** is negative, then SQLite takes result text from the 2nd parameter -** through the first zero character. +** ^If the 3rd parameter to any of the sqlite3_result_text* interfaces +** other than sqlite3_result_text64() is negative, then SQLite computes +** the string length itself by searching the 2nd parameter for the first +** zero character. ** ^If the 3rd parameter to the sqlite3_result_text* interfaces ** is non-negative, then as many bytes (not characters) of the text ** pointed to by the 2nd parameter are taken as the application-defined @@ -6328,7 +6423,7 @@ SQLITE_API const char *sqlite3_db_name(sqlite3 *db, int N); ** <li> [sqlite3_filename_wal()] ** </ul> */ -SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName); +SQLITE_API sqlite3_filename sqlite3_db_filename(sqlite3 *db, const char *zDbName); /* ** CAPI3REF: Determine if a database is read-only @@ -6465,7 +6560,7 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** function C that is invoked prior to each autovacuum of the database ** file. ^The callback is passed a copy of the generic data pointer (P), ** the schema-name of the attached database that is being autovacuumed, -** the the size of the database file in pages, the number of free pages, +** the size of the database file in pages, the number of free pages, ** and the number of bytes per page, respectively. The callback should ** return the number of free pages that should be removed by the ** autovacuum. ^If the callback returns zero, then no autovacuum happens. @@ -6586,6 +6681,11 @@ SQLITE_API void *sqlite3_update_hook( ** to the same database. Sharing is enabled if the argument is true ** and disabled if the argument is false.)^ ** +** This interface is omitted if SQLite is compiled with +** [-DSQLITE_OMIT_SHARED_CACHE]. The [-DSQLITE_OMIT_SHARED_CACHE] +** compile-time option is recommended because the +** [use of shared cache mode is discouraged]. +** ** ^Cache sharing is enabled and disabled for an entire process. ** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). ** In prior versions of SQLite, @@ -6684,7 +6784,7 @@ SQLITE_API int sqlite3_db_release_memory(sqlite3*); ** ^The soft heap limit may not be greater than the hard heap limit. ** ^If the hard heap limit is enabled and if sqlite3_soft_heap_limit(N) ** is invoked with a value of N that is greater than the hard heap limit, -** the the soft heap limit is set to the value of the hard heap limit. +** the soft heap limit is set to the value of the hard heap limit. ** ^The soft heap limit is automatically enabled whenever the hard heap ** limit is enabled. ^When sqlite3_hard_heap_limit64(N) is invoked and ** the soft heap limit is outside the range of 1..N, then the soft heap @@ -6946,15 +7046,6 @@ SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void)); SQLITE_API void sqlite3_reset_auto_extension(void); /* -** The interface to the virtual-table mechanism is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* ** Structures used by the virtual table interface */ typedef struct sqlite3_vtab sqlite3_vtab; @@ -7072,10 +7163,10 @@ struct sqlite3_module { ** when the omit flag is true there is no guarantee that the constraint will ** not be checked again using byte code.)^ ** -** ^The idxNum and idxPtr values are recorded and passed into the +** ^The idxNum and idxStr values are recorded and passed into the ** [xFilter] method. -** ^[sqlite3_free()] is used to free idxPtr if and only if -** needToFreeIdxPtr is true. +** ^[sqlite3_free()] is used to free idxStr if and only if +** needToFreeIdxStr is true. ** ** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in ** the correct order to satisfy the ORDER BY clause so that no separate @@ -7195,7 +7286,7 @@ struct sqlite3_index_info { ** the [sqlite3_vtab_collation()] interface. For most real-world virtual ** tables, the collating sequence of constraints does not matter (for example ** because the constraints are numeric) and so the sqlite3_vtab_collation() -** interface is no commonly needed. +** interface is not commonly needed. */ #define SQLITE_INDEX_CONSTRAINT_EQ 2 #define SQLITE_INDEX_CONSTRAINT_GT 4 @@ -7355,16 +7446,6 @@ SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL); SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg); /* -** The interface to the virtual-table mechanism defined above (back up -** to a comment remarkably similar to this one) is currently considered -** to be experimental. The interface might change in incompatible ways. -** If this is a problem for you, do not use the interface at this time. -** -** When the virtual-table mechanism stabilizes, we will declare the -** interface fixed, support it indefinitely, and remove this comment. -*/ - -/* ** CAPI3REF: A Handle To An Open BLOB ** KEYWORDS: {BLOB handle} {BLOB handles} ** @@ -8979,7 +9060,7 @@ typedef struct sqlite3_backup sqlite3_backup; ** if the application incorrectly accesses the destination [database connection] ** and so no error code is reported, but the operations may malfunction ** nevertheless. Use of the destination database connection while a -** backup is in progress might also also cause a mutex deadlock. +** backup is in progress might also cause a mutex deadlock. ** ** If running in [shared cache mode], the application must ** guarantee that the shared cache used by the destination database @@ -9407,7 +9488,7 @@ SQLITE_API int sqlite3_wal_checkpoint_v2( */ #define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */ #define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */ -#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */ +#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for readers */ #define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */ /* @@ -9567,7 +9648,7 @@ SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*); ** <li><p> Otherwise, "BINARY" is returned. ** </ol> */ -SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int); +SQLITE_API const char *sqlite3_vtab_collation(sqlite3_index_info*,int); /* ** CAPI3REF: Determine if a virtual table query is DISTINCT @@ -9724,21 +9805,20 @@ SQLITE_API int sqlite3_vtab_in(sqlite3_index_info*, int iCons, int bHandle); ** is undefined and probably harmful. ** ** The X parameter in a call to sqlite3_vtab_in_first(X,P) or -** sqlite3_vtab_in_next(X,P) must be one of the parameters to the +** sqlite3_vtab_in_next(X,P) should be one of the parameters to the ** xFilter method which invokes these routines, and specifically ** a parameter that was previously selected for all-at-once IN constraint ** processing use the [sqlite3_vtab_in()] interface in the ** [xBestIndex|xBestIndex method]. ^(If the X parameter is not ** an xFilter argument that was selected for all-at-once IN constraint -** processing, then these routines return [SQLITE_MISUSE])^ or perhaps -** exhibit some other undefined or harmful behavior. +** processing, then these routines return [SQLITE_ERROR].)^ ** ** ^(Use these routines to access all values on the right-hand side ** of the IN constraint using code like the following: ** ** <blockquote><pre> ** for(rc=sqlite3_vtab_in_first(pList, &pVal); -** rc==SQLITE_OK && pVal +** rc==SQLITE_OK && pVal; ** rc=sqlite3_vtab_in_next(pList, &pVal) ** ){ ** // do something with pVal @@ -9836,6 +9916,10 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value ** ** managed by the prepared statement S and will be automatically freed when ** S is finalized. ** +** Not all values are available for all query elements. When a value is +** not available, the output variable is set to -1 if the value is numeric, +** or to NULL if it is a string (SQLITE_SCANSTAT_NAME). +** ** <dl> ** [[SQLITE_SCANSTAT_NLOOP]] <dt>SQLITE_SCANSTAT_NLOOP</dt> ** <dd>^The [sqlite3_int64] variable pointed to by the V parameter will be @@ -9863,12 +9947,24 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value ** ** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN] ** description for the X-th loop. ** -** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECT</dt> +** [[SQLITE_SCANSTAT_SELECTID]] <dt>SQLITE_SCANSTAT_SELECTID</dt> ** <dd>^The "int" variable pointed to by the V parameter will be set to the -** "select-id" for the X-th loop. The select-id identifies which query or -** subquery the loop is part of. The main query has a select-id of zero. -** The select-id is the same value as is output in the first column -** of an [EXPLAIN QUERY PLAN] query. +** id for the X-th query plan element. The id value is unique within the +** statement. The select-id is the same value as is output in the first +** column of an [EXPLAIN QUERY PLAN] query. +** +** [[SQLITE_SCANSTAT_PARENTID]] <dt>SQLITE_SCANSTAT_PARENTID</dt> +** <dd>The "int" variable pointed to by the V parameter will be set to the +** the id of the parent of the current query element, if applicable, or +** to zero if the query element has no parent. This is the same value as +** returned in the second column of an [EXPLAIN QUERY PLAN] query. +** +** [[SQLITE_SCANSTAT_NCYCLE]] <dt>SQLITE_SCANSTAT_NCYCLE</dt> +** <dd>The sqlite3_int64 output value is set to the number of cycles, +** according to the processor time-stamp counter, that elapsed while the +** query element was being processed. This value is not available for +** all query elements - if it is unavailable the output variable is +** set to -1. ** </dl> */ #define SQLITE_SCANSTAT_NLOOP 0 @@ -9877,12 +9973,14 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value ** #define SQLITE_SCANSTAT_NAME 3 #define SQLITE_SCANSTAT_EXPLAIN 4 #define SQLITE_SCANSTAT_SELECTID 5 +#define SQLITE_SCANSTAT_PARENTID 6 +#define SQLITE_SCANSTAT_NCYCLE 7 /* ** CAPI3REF: Prepared Statement Scan Status ** METHOD: sqlite3_stmt ** -** This interface returns information about the predicted and measured +** These interfaces return information about the predicted and measured ** performance for pStmt. Advanced applications can use this ** interface to compare the predicted and the measured performance and ** issue warnings and/or rerun [ANALYZE] if discrepancies are found. @@ -9893,19 +9991,25 @@ SQLITE_API int sqlite3_vtab_rhs_value(sqlite3_index_info*, int, sqlite3_value ** ** ** The "iScanStatusOp" parameter determines which status information to return. ** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior -** of this interface is undefined. -** ^The requested measurement is written into a variable pointed to by -** the "pOut" parameter. -** Parameter "idx" identifies the specific loop to retrieve statistics for. -** Loops are numbered starting from zero. ^If idx is out of range - less than -** zero or greater than or equal to the total number of loops used to implement -** the statement - a non-zero value is returned and the variable that pOut -** points to is unchanged. -** -** ^Statistics might not be available for all loops in all statements. ^In cases -** where there exist loops with no available statistics, this function behaves -** as if the loop did not exist - it returns non-zero and leave the variable -** that pOut points to unchanged. +** of this interface is undefined. ^The requested measurement is written into +** a variable pointed to by the "pOut" parameter. +** +** The "flags" parameter must be passed a mask of flags. At present only +** one flag is defined - SQLITE_SCANSTAT_COMPLEX. If SQLITE_SCANSTAT_COMPLEX +** is specified, then status information is available for all elements +** of a query plan that are reported by "EXPLAIN QUERY PLAN" output. If +** SQLITE_SCANSTAT_COMPLEX is not specified, then only query plan elements +** that correspond to query loops (the "SCAN..." and "SEARCH..." elements of +** the EXPLAIN QUERY PLAN output) are available. Invoking API +** sqlite3_stmt_scanstatus() is equivalent to calling +** sqlite3_stmt_scanstatus_v2() with a zeroed flags parameter. +** +** Parameter "idx" identifies the specific query element to retrieve statistics +** for. Query elements are numbered starting from zero. A value of -1 may be +** to query for statistics regarding the entire query. ^If idx is out of range +** - less than -1 or greater than or equal to the total number of query +** elements used to implement the statement - a non-zero value is returned and +** the variable that pOut points to is unchanged. ** ** See also: [sqlite3_stmt_scanstatus_reset()] */ @@ -9915,6 +10019,19 @@ SQLITE_API int sqlite3_stmt_scanstatus( int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */ void *pOut /* Result written here */ ); +SQLITE_API int sqlite3_stmt_scanstatus_v2( + sqlite3_stmt *pStmt, /* Prepared statement for which info desired */ + int idx, /* Index of loop to report on */ + int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */ + int flags, /* Mask of flags defined below */ + void *pOut /* Result written here */ +); + +/* +** CAPI3REF: Prepared Statement Scan Status +** KEYWORDS: {scan status flags} +*/ +#define SQLITE_SCANSTAT_COMPLEX 0x0001 /* ** CAPI3REF: Zero Scan-Status Counters @@ -10005,6 +10122,10 @@ SQLITE_API int sqlite3_db_cacheflush(sqlite3*); ** function is not defined for operations on WITHOUT ROWID tables, or for ** DELETE operations on rowid tables. ** +** ^The sqlite3_preupdate_hook(D,C,P) function returns the P argument from +** the previous call on the same [database connection] D, or NULL for +** the first call on D. +** ** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()], ** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces ** provide additional information about a preupdate event. These routines @@ -10410,6 +10531,19 @@ SQLITE_API int sqlite3_deserialize( # undef double #endif +#if defined(__wasi__) +# undef SQLITE_WASI +# define SQLITE_WASI 1 +# undef SQLITE_OMIT_WAL +# define SQLITE_OMIT_WAL 1/* because it requires shared memory APIs */ +# ifndef SQLITE_OMIT_LOAD_EXTENSION +# define SQLITE_OMIT_LOAD_EXTENSION +# endif +# ifndef SQLITE_THREADSAFE +# define SQLITE_THREADSAFE 0 +# endif +#endif + #ifdef __cplusplus } /* End of the 'extern "C"' block */ #endif @@ -12834,3 +12968,254 @@ struct fts5_api { #endif /* _FTS5_H */ /******** End of fts5.h *********/ +/******** Begin file sqlite3recover.h *********/ +/* +** 2022-08-27 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains the public interface to the "recover" extension - +** an SQLite extension designed to recover data from corrupted database +** files. +*/ + +/* +** OVERVIEW: +** +** To use the API to recover data from a corrupted database, an +** application: +** +** 1) Creates an sqlite3_recover handle by calling either +** sqlite3_recover_init() or sqlite3_recover_init_sql(). +** +** 2) Configures the new handle using one or more calls to +** sqlite3_recover_config(). +** +** 3) Executes the recovery by repeatedly calling sqlite3_recover_step() on +** the handle until it returns something other than SQLITE_OK. If it +** returns SQLITE_DONE, then the recovery operation completed without +** error. If it returns some other non-SQLITE_OK value, then an error +** has occurred. +** +** 4) Retrieves any error code and English language error message using the +** sqlite3_recover_errcode() and sqlite3_recover_errmsg() APIs, +** respectively. +** +** 5) Destroys the sqlite3_recover handle and frees all resources +** using sqlite3_recover_finish(). +** +** The application may abandon the recovery operation at any point +** before it is finished by passing the sqlite3_recover handle to +** sqlite3_recover_finish(). This is not an error, but the final state +** of the output database, or the results of running the partial script +** delivered to the SQL callback, are undefined. +*/ + +#ifndef _SQLITE_RECOVER_H +#define _SQLITE_RECOVER_H + + +#ifdef __cplusplus +extern "C" { +#endif + +/* +** An instance of the sqlite3_recover object represents a recovery +** operation in progress. +** +** Constructors: +** +** sqlite3_recover_init() +** sqlite3_recover_init_sql() +** +** Destructor: +** +** sqlite3_recover_finish() +** +** Methods: +** +** sqlite3_recover_config() +** sqlite3_recover_errcode() +** sqlite3_recover_errmsg() +** sqlite3_recover_run() +** sqlite3_recover_step() +*/ +typedef struct sqlite3_recover sqlite3_recover; + +/* +** These two APIs attempt to create and return a new sqlite3_recover object. +** In both cases the first two arguments identify the (possibly +** corrupt) database to recover data from. The first argument is an open +** database handle and the second the name of a database attached to that +** handle (i.e. "main", "temp" or the name of an attached database). +** +** If sqlite3_recover_init() is used to create the new sqlite3_recover +** handle, then data is recovered into a new database, identified by +** string parameter zUri. zUri may be an absolute or relative file path, +** or may be an SQLite URI. If the identified database file already exists, +** it is overwritten. +** +** If sqlite3_recover_init_sql() is invoked, then any recovered data will +** be returned to the user as a series of SQL statements. Executing these +** SQL statements results in the same database as would have been created +** had sqlite3_recover_init() been used. For each SQL statement in the +** output, the callback function passed as the third argument (xSql) is +** invoked once. The first parameter is a passed a copy of the fourth argument +** to this function (pCtx) as its first parameter, and a pointer to a +** nul-terminated buffer containing the SQL statement formated as UTF-8 as +** the second. If the xSql callback returns any value other than SQLITE_OK, +** then processing is immediately abandoned and the value returned used as +** the recover handle error code (see below). +** +** If an out-of-memory error occurs, NULL may be returned instead of +** a valid handle. In all other cases, it is the responsibility of the +** application to avoid resource leaks by ensuring that +** sqlite3_recover_finish() is called on all allocated handles. +*/ +SQLITE_API sqlite3_recover *sqlite3_recover_init( + sqlite3* db, + const char *zDb, + const char *zUri +); +SQLITE_API sqlite3_recover *sqlite3_recover_init_sql( + sqlite3* db, + const char *zDb, + int (*xSql)(void*, const char*), + void *pCtx +); + +/* +** Configure an sqlite3_recover object that has just been created using +** sqlite3_recover_init() or sqlite3_recover_init_sql(). This function +** may only be called before the first call to sqlite3_recover_step() +** or sqlite3_recover_run() on the object. +** +** The second argument passed to this function must be one of the +** SQLITE_RECOVER_* symbols defined below. Valid values for the third argument +** depend on the specific SQLITE_RECOVER_* symbol in use. +** +** SQLITE_OK is returned if the configuration operation was successful, +** or an SQLite error code otherwise. +*/ +SQLITE_API int sqlite3_recover_config(sqlite3_recover*, int op, void *pArg); + +/* +** SQLITE_RECOVER_LOST_AND_FOUND: +** The pArg argument points to a string buffer containing the name +** of a "lost-and-found" table in the output database, or NULL. If +** the argument is non-NULL and the database contains seemingly +** valid pages that cannot be associated with any table in the +** recovered part of the schema, data is extracted from these +** pages to add to the lost-and-found table. +** +** SQLITE_RECOVER_FREELIST_CORRUPT: +** The pArg value must actually be a pointer to a value of type +** int containing value 0 or 1 cast as a (void*). If this option is set +** (argument is 1) and a lost-and-found table has been configured using +** SQLITE_RECOVER_LOST_AND_FOUND, then is assumed that the freelist is +** corrupt and an attempt is made to recover records from pages that +** appear to be linked into the freelist. Otherwise, pages on the freelist +** are ignored. Setting this option can recover more data from the +** database, but often ends up "recovering" deleted records. The default +** value is 0 (clear). +** +** SQLITE_RECOVER_ROWIDS: +** The pArg value must actually be a pointer to a value of type +** int containing value 0 or 1 cast as a (void*). If this option is set +** (argument is 1), then an attempt is made to recover rowid values +** that are not also INTEGER PRIMARY KEY values. If this option is +** clear, then new rowids are assigned to all recovered rows. The +** default value is 1 (set). +** +** SQLITE_RECOVER_SLOWINDEXES: +** The pArg value must actually be a pointer to a value of type +** int containing value 0 or 1 cast as a (void*). If this option is clear +** (argument is 0), then when creating an output database, the recover +** module creates and populates non-UNIQUE indexes right at the end of the +** recovery operation - after all recoverable data has been inserted +** into the new database. This is faster overall, but means that the +** final call to sqlite3_recover_step() for a recovery operation may +** be need to create a large number of indexes, which may be very slow. +** +** Or, if this option is set (argument is 1), then non-UNIQUE indexes +** are created in the output database before it is populated with +** recovered data. This is slower overall, but avoids the slow call +** to sqlite3_recover_step() at the end of the recovery operation. +** +** The default option value is 0. +*/ +#define SQLITE_RECOVER_LOST_AND_FOUND 1 +#define SQLITE_RECOVER_FREELIST_CORRUPT 2 +#define SQLITE_RECOVER_ROWIDS 3 +#define SQLITE_RECOVER_SLOWINDEXES 4 + +/* +** Perform a unit of work towards the recovery operation. This function +** must normally be called multiple times to complete database recovery. +** +** If no error occurs but the recovery operation is not completed, this +** function returns SQLITE_OK. If recovery has been completed successfully +** then SQLITE_DONE is returned. If an error has occurred, then an SQLite +** error code (e.g. SQLITE_IOERR or SQLITE_NOMEM) is returned. It is not +** considered an error if some or all of the data cannot be recovered +** due to database corruption. +** +** Once sqlite3_recover_step() has returned a value other than SQLITE_OK, +** all further such calls on the same recover handle are no-ops that return +** the same non-SQLITE_OK value. +*/ +SQLITE_API int sqlite3_recover_step(sqlite3_recover*); + +/* +** Run the recovery operation to completion. Return SQLITE_OK if successful, +** or an SQLite error code otherwise. Calling this function is the same +** as executing: +** +** while( SQLITE_OK==sqlite3_recover_step(p) ); +** return sqlite3_recover_errcode(p); +*/ +SQLITE_API int sqlite3_recover_run(sqlite3_recover*); + +/* +** If an error has been encountered during a prior call to +** sqlite3_recover_step(), then this function attempts to return a +** pointer to a buffer containing an English language explanation of +** the error. If no error message is available, or if an out-of memory +** error occurs while attempting to allocate a buffer in which to format +** the error message, NULL is returned. +** +** The returned buffer remains valid until the sqlite3_recover handle is +** destroyed using sqlite3_recover_finish(). +*/ +SQLITE_API const char *sqlite3_recover_errmsg(sqlite3_recover*); + +/* +** If this function is called on an sqlite3_recover handle after +** an error occurs, an SQLite error code is returned. Otherwise, SQLITE_OK. +*/ +SQLITE_API int sqlite3_recover_errcode(sqlite3_recover*); + +/* +** Clean up a recovery object created by a call to sqlite3_recover_init(). +** The results of using a recovery object with any API after it has been +** passed to this function are undefined. +** +** This function returns the same value as sqlite3_recover_errcode(). +*/ +SQLITE_API int sqlite3_recover_finish(sqlite3_recover*); + + +#ifdef __cplusplus +} /* end of the 'extern "C"' block */ +#endif + +#endif /* ifndef _SQLITE_RECOVER_H */ + +/******** End of sqlite3recover.h *********/ |