| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
| |
Use functions for all accesses to dictEntry (except in dict.c). Dict abuses
e.g. in defrag.c have been replaced by support functions provided by dict.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
As being discussed in #10981 we see a degradation in performance
between v6.2 and v7.0 of Redis on the EVAL command.
After profiling the current unstable branch we can see that we call the
expensive function evalCalcFunctionName twice.
The current "fix" is to basically avoid calling evalCalcFunctionName and
even dictFind(lua_scripts) twice for the same command.
Instead we cache the current script's dictEntry (for both Eval and Functions)
in the current client so we don't have to repeat these calls.
The exception would be when doing an EVAL on a new script that's not yet
in the script cache. in that case we will call evalCalcFunctionName (and even
evalExtractShebangFlags) twice.
Co-authored-by: Oran Agra <oran@redislabs.com>
|
| |
|
| |
Both functions and eval are marked as "no-monitor", since we want to explicitly feed in the script command before the commands generated by the script. Note that we want this behavior generally, so that commands can redact arguments before being added to the monitor.
|
| |
|
|
| |
The initial module format introduced in 4.0 RC1 and was changed in RC2
The initial function format introduced in 7.0 RC1 and changed in RC3
|
| |
|
|
| |
Update error messages for function load
|
| |
|
| |
* Fix some outdated comments and some typo
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
|
| |
|
|
|
| |
This bug resulted in wrong memory usage statistics after a redis function library is removed.
Signed-off-by: skygragon <skygragon@gmail.com>
|
| |
|
|
| |
Clearly more than one flag exists, also fixed some typos.
Fixes #10776
|
| |
|
|
|
|
|
| |
Set `old_li` to NULL to avoid linking it again on error.
Before the fix, loading an already existing library will cause the existing library to be added again. This cause not harm other then wrong statistics. The statistics that are effected by the issue are:
* `libraries_count` and `functions_count` returned by `function stats` command
* `used_memory_functions` returned on `info memory` command
* `functions.caches` returned on `memory stats` command
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
## Move library meta data to be part of the library payload.
Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.**
The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example:
```lua
#!lua name=test
redis.register_function('foo', function() return 1 end)
```
The above script will run on the Lua engine and will create a library called `test`.
## API Changes (compare to 7.0 rc2)
* `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`.
* The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST`
## Breaking Changes (compare to 7.0 rc2)
* Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line).
* Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid.
## Notes
* Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
|
| |
|
| |
update function help message, changed DESC->DESCRIPTION (doc was outdated)
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Added the following statistics (per engine) to FUNCTION STATS command:
* number of functions
* number of libraries
Output example:
```
> FUNCTION stats
1) "running_script"
2) (nil)
3) "engines"
4) 1) "LUA"
2) 1) "libraries_count"
2) (integer) 1
3) "functions_count"
4) (integer) 1
```
To collect the stats, added a new dictionary to libraries_ctx that contains
for each engine, the engine statistics representing the current libraries_ctx.
Update the stats on:
1. Link library to libraries_ctx
2. Unlink library from libraries_ctx
3. Flushing libraries_ctx
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In #10025 we added a mechanism for flagging certain properties for Redis Functions.
This lead us to think we'd like to "port" this mechanism to Redis Scripts (`EVAL`) as well.
One good reason for this, other than the added functionality is because it addresses the
poor behavior we currently have in `EVAL` in case the script performs a (non DENY_OOM) write operation
during OOM state. See #8478 (And a previous attempt to handle it via #10093) for details.
Note that in Redis Functions **all** write operations (including DEL) will return an error during OOM state
unless the function is flagged as `allow-oom` in which case no OOM checking is performed at all.
This PR:
- Enables setting `EVAL` (and `SCRIPT LOAD`) script flags as defined in #10025.
- Provides a syntactical framework via [shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) for
additional script annotations and even engine selection (instead of just lua) for scripts.
- Provides backwards compatibility so scripts without the new annotations will behave as they did before.
- Appropriate tests.
- Changes `EVAL[SHA]/_RO` to be flagged as `STALE` commands. This makes it possible to flag individual
scripts as `allow-stale` or not flag them as such. In backwards compatibility mode these commands will
return the `MASTERDOWN` error as before.
- Changes `SCRIPT LOAD` to be flagged as a `STALE` command. This is mainly to make it logically
compatible with the change to `EVAL` in the previous point. It enables loading a script on a stale server
which is technically okay it doesn't relate directly to the server's dataset. Running the script does, but that
won't work unless the script is explicitly marked as `allow-stale`.
Note that even though the LUA syntax doesn't support hash tag comments `.lua` files do support a shebang
tag on the top so they can be executed on Unix systems like any shell script. LUA's `luaL_loadfile` handles
this as part of the LUA library. In the case of `luaL_loadbuffer`, which is what Redis uses, I needed to fix the
input script in case of a shebang manually. I did this the same way `luaL_loadfile` does, by replacing the
first line with a single line feed character.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Following discussion on: https://github.com/redis/redis/issues/9899#issuecomment-1014689385
Raise error if unknows parameter is given to `FUNCTION LOAD`.
Before the fix:
```
127.0.0.1:6379> function load LUA lib2 foo bar "local function test1() return 5 end redis.register_function('test1', test1)"
OK
```
After the fix:
```
127.0.0.1:6379> function load LUA lib2 foo bar "local function test1() return 5 end redis.register_function('test1', test1)"
(error) ERR Unkowns option given: foo
```
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
# Redis Functions Flags
Following the discussion on #10025 Added Functions Flags support.
The PR is divided to 2 sections:
* Add named argument support to `redis.register_function` API.
* Add support for function flags
## `redis.register_function` named argument support
The first part of the PR adds support for named argument on `redis.register_function`, example:
```
redis.register_function{
function_name='f1',
callback=function()
return 'hello'
end,
description='some desc'
}
```
The positional arguments is also kept, which means that it still possible to write:
```
redis.register_function('f1', function() return 'hello' end)
```
But notice that it is no longer possible to pass the optional description argument on the positional
argument version. Positional argument was change to allow passing only the mandatory arguments
(function name and callback). To pass more arguments the user must use the named argument version.
As with positional arguments, the `function_name` and `callback` is mandatory and an error will be
raise if those are missing. Also, an error will be raise if an unknown argument name is given or the
arguments type is wrong.
Tests was added to verify the new syntax.
## Functions Flags
The second part of the PR is adding functions flags support.
Flags are given to Redis when the engine calls `functionLibCreateFunction`, supported flags are:
* `no-writes` - indicating the function perform no writes which means that it is OK to run it on:
* read-only replica
* Using FCALL_RO
* If disk error detected
It will not be possible to run a function in those situations unless the function turns on the `no-writes` flag
* `allow-oom` - indicate that its OK to run the function even if Redis is in OOM state, if the function will
not turn on this flag it will not be possible to run it if OOM reached (even if the function declares `no-writes`
and even if `fcall_ro` is used). If this flag is set, any command will be allow on OOM (even those that is
marked with CMD_DENYOOM). The assumption is that this flag is for advance users that knows its
meaning and understand what they are doing, and Redis trust them to not increase the memory usage.
(e.g. it could be an INCR or a modification on an existing key, or a DEL command)
* `allow-state` - indicate that its OK to run the function on stale replica, in this case we will also make
sure the function is only perform `stale` commands and raise an error if not.
* `no-cluster` - indicate to disallow running the function if cluster is enabled.
Default behaviure of functions (if no flags is given):
1. Allow functions to read and write
2. Do not run functions on OOM
3. Do not run functions on stale replica
4. Allow functions on cluster
### Lua API for functions flags
On Lua engine, it is possible to give functions flags as `flags` named argument:
```
redis.register_function{function_name='f1', callback=function() return 1 end, flags={'no-writes', 'allow-oom'}, description='description'}
```
The function flags argument must be a Lua table that contains all the requested flags, The following
will result in an error:
* Unknown flag
* Wrong flag type
Default behaviour is the same as if no flags are used.
Tests were added to verify all flags functionality
## Additional changes
* mark FCALL and FCALL_RO with CMD_STALE flag (unlike EVAL), so that they can run if the function was
registered with the `allow-stale` flag.
* Verify `CMD_STALE` on `scriptCall` (`redis.call`), so it will not be possible to call commands from script while
stale unless the command is marked with the `CMD_STALE` flags. so that even if the function is allowed while
stale we do not allow it to bypass the `CMD_STALE` flag of commands.
* Flags section was added to `FUNCTION LIST` command to provide the set of flags for each function:
```
> FUNCTION list withcode
1) 1) "library_name"
2) "test"
3) "engine"
4) "LUA"
5) "description"
6) (nil)
7) "functions"
8) 1) 1) "name"
2) "f1"
3) "description"
4) (nil)
5) "flags"
6) (empty array)
9) "library_code"
10) "redis.register_function{function_name='f1', callback=function() return 1 end}"
```
* Added API to get Redis version from within a script, The redis version can be provided using:
1. `redis.REDIS_VERSION` - string representation of the redis version in the format of MAJOR.MINOR.PATH
2. `redis.REDIS_VERSION_NUM` - number representation of the redis version in the format of `0x00MMmmpp`
(`MM` - major, `mm` - minor, `pp` - patch). The number version can be used to check if version is greater or less
another version. The string version can be used to return to the user or print as logs.
This new API is provided to eval scripts and functions, it also possible to use this API during functions loading phase.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
# Redis Function Libraries
This PR implements Redis Functions Libraries as describe on: https://github.com/redis/redis/issues/9906.
Libraries purpose is to provide a better code sharing between functions by allowing to create multiple
functions in a single command. Functions that were created together can safely share code between
each other without worrying about compatibility issues and versioning.
Creating a new library is done using 'FUNCTION LOAD' command (full API is described below)
This PR introduces a new struct called libraryInfo, libraryInfo holds information about a library:
* name - name of the library
* engine - engine used to create the library
* code - library code
* description - library description
* functions - the functions exposed by the library
When Redis gets the `FUNCTION LOAD` command it creates a new empty libraryInfo.
Redis passes the `CODE` to the relevant engine alongside the empty libraryInfo.
As a result, the engine will create one or more functions by calling 'libraryCreateFunction'.
The new funcion will be added to the newly created libraryInfo. So far Everything is happening
locally on the libraryInfo so it is easy to abort the operation (in case of an error) by simply
freeing the libraryInfo. After the library info is fully constructed we start the joining phase by
which we will join the new library to the other libraries currently exist on Redis.
The joining phase make sure there is no function collision and add the library to the
librariesCtx (renamed from functionCtx). LibrariesCtx is used all around the code in the exact
same way as functionCtx was used (with respect to RDB loading, replicatio, ...).
The only difference is that apart from function dictionary (maps function name to functionInfo
object), the librariesCtx contains also a libraries dictionary that maps library name to libraryInfo object.
## New API
### FUNCTION LOAD
`FUNCTION LOAD <ENGINE> <LIBRARY NAME> [REPLACE] [DESCRIPTION <DESCRIPTION>] <CODE>`
Create a new library with the given parameters:
* ENGINE - REPLACE Engine name to use to create the library.
* LIBRARY NAME - The new library name.
* REPLACE - If the library already exists, replace it.
* DESCRIPTION - Library description.
* CODE - Library code.
Return "OK" on success, or error on the following cases:
* Library name already taken and REPLACE was not used
* Name collision with another existing library (even if replace was uses)
* Library registration failed by the engine (usually compilation error)
## Changed API
### FUNCTION LIST
`FUNCTION LIST [LIBRARYNAME <LIBRARY NAME PATTERN>] [WITHCODE]`
Command was modified to also allow getting libraries code (so `FUNCTION INFO` command is no longer
needed and removed). In addition the command gets an option argument, `LIBRARYNAME` allows you to
only get libraries that match the given `LIBRARYNAME` pattern. By default, it returns all libraries.
### INFO MEMORY
Added number of libraries to `INFO MEMORY`
### Commands flags
`DENYOOM` flag was set on `FUNCTION LOAD` and `FUNCTION RESTORE`. We consider those commands
as commands that add new data to the dateset (functions are data) and so we want to disallows
to run those commands on OOM.
## Removed API
* FUNCTION CREATE - Decided on https://github.com/redis/redis/issues/9906
* FUNCTION INFO - Decided on https://github.com/redis/redis/issues/9899
## Lua engine changes
When the Lua engine gets the code given on `FUNCTION LOAD` command, it immediately runs it, we call
this run the loading run. Loading run is not a usual script run, it is not possible to invoke any
Redis command from within the load run.
Instead there is a new API provided by `library` object. The new API's:
* `redis.log` - behave the same as `redis.log`
* `redis.register_function` - register a new function to the library
The loading run purpose is to register functions using the new `redis.register_function` API.
Any attempt to use any other API will result in an error. In addition, the load run is has a time
limit of 500ms, error is raise on timeout and the entire operation is aborted.
### `redis.register_function`
`redis.register_function(<function_name>, <callback>, [<description>])`
This new API allows users to register a new function that will be linked to the newly created library.
This API can only be called during the load run (see definition above). Any attempt to use it outside
of the load run will result in an error.
The parameters pass to the API are:
* function_name - Function name (must be a Lua string)
* callback - Lua function object that will be called when the function is invokes using fcall/fcall_ro
* description - Function description, optional (must be a Lua string).
### Example
The following example creates a library called `lib` with 2 functions, `f1` and `f1`, returns 1 and 2 respectively:
```
local function f1(keys, args)
return 1
end
local function f2(keys, args)
return 2
end
redis.register_function('f1', f1)
redis.register_function('f2', f2)
```
Notice: Unlike `eval`, functions inside a library get the KEYS and ARGV as arguments to the
functions and not as global.
### Technical Details
On the load run we only want the user to be able to call a white list on API's. This way, in
the future, if new API's will be added, the new API's will not be available to the load run
unless specifically added to this white list. We put the while list on the `library` object and
make sure the `library` object is only available to the load run by using [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv) API. This API allows us to set
the `globals` of a function (and all the function it creates). Before starting the load run we
create a new fresh Lua table (call it `g`) that only contains the `library` API (we make sure
to set global protection on this table just like the general global protection already exists
today), then we use [lua_setfenv](https://www.lua.org/manual/5.1/manual.html#lua_setfenv)
to set `g` as the global table of the load run. After the load run finished we update `g`
metatable and set `__index` and `__newindex` functions to be `_G` (Lua default globals),
we also pop out the `library` object as we do not need it anymore.
This way, any function that was created on the load run (and will be invoke using `fcall`) will
see the default globals as it expected to see them and will not have the `library` API anymore.
An important outcome of this new approach is that now we can achieve a distinct global table
for each library (it is not yet like that but it is very easy to achieve it now). In the future we can
decide to remove global protection because global on different libraries will not collide or we
can chose to give different API to different libraries base on some configuration or input.
Notice that this technique was meant to prevent errors and was not meant to prevent malicious
user from exploit it. For example, the load run can still save the `library` object on some local
variable and then using in `fcall` context. To prevent such a malicious use, the C code also make
sure it is running in the right context and if not raise an error.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is needed in order to ease the deployment of functions for ephemeral cases, where user
needs to spin up a server with functions pre-loaded.
#### Details:
* Added `--functions-rdb` option to _redis-cli_.
* Functions only rdb via `REPLCONF rdb-filter-only functions`. This is a placeholder for a space
separated inclusion filter for the RDB. In the future can be `REPLCONF rdb-filter-only
"functions db:3 key-patten:user*"` and a complementing `rdb-filter-exclude` `REPLCONF`
can also be added.
* Handle "slave requirements" specification to RDB saving code so we can use the same RDB
when different slaves express the same requirements (like functions-only) and not share the
RDB when their requirements differ. This is currently just a flags `int`, but can be extended to
a more complex structure with various filter fields.
* make sure to support filters only in diskless replication mode (not to override the persistence file),
we do that by forcing diskless (even if disabled by config)
other changes:
* some refactoring in rdb.c (extract portion of a big function to a sub-function)
* rdb_key_save_delay used in AOFRW too
* sendChildInfo takes the number of updated keys (incremental, rather than absolute)
Co-authored-by: Oran Agra <oran@redislabs.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Follow the conclusions to support Functions in redis cluster (#9899)
Added 2 new FUNCTION sub-commands:
1. `FUNCTION DUMP` - dump a binary payload representation of all the functions.
2. `FUNCTION RESTORE <PAYLOAD> [FLUSH|APPEND|REPLACE]` - give the binary payload extracted
using `FUNCTION DUMP`, restore all the functions on the given payload. Restore policy can be given to
control how to handle existing functions (default is APPEND):
* FLUSH: delete all existing functions.
* APPEND: appends the restored functions to the existing functions. On collision, abort.
* REPLACE: appends the restored functions to the existing functions. On collision,
replace the old function with the new function.
Modify `redis-cli --cluster add-node` to use `FUNCTION DUMP` to get existing functions from
one of the nodes in the cluster, and `FUNCTION RESTORE` to load the same set of functions
to the new node. `redis-cli` will execute this step before sending the `CLUSTER MEET` command
to the new node. If `FUNCTION DUMP` returns an error, assume the current Redis version do not
support functions and skip `FUNCTION RESTORE`. If `FUNCTION RESTORE` fails, abort and do not send
the `CLUSTER MEET` command. If the new node already contains functions (before the `FUNCTION RESTORE`
is sent), abort and do not add the node to the cluster. Test was added to verify
`redis-cli --cluster add-node` works as expected.
|
| |
|
|
| |
Use case insensitive string comparison for function names (like we do for commands and configs)
In addition, add verification that the functions only use the following characters: [a-zA-Z0-9_]
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MAY_REPLICATE. (#9953)
The issue with MAY_REPLICATE is that all automatic mechanisms to handle
write commands will not work. This require have a special treatment for:
* Not allow those commands to be executed on RO replica.
* Allow those commands to be executed on RO replica from primary connection.
* Allow those commands to be executed on the RO replica from AOF.
By setting those commands as WRITE commands we are getting all those properties from Redis.
Test was added to verify that those properties work as expected.
In addition, rearrange when and where functions are flushed. Before this PR functions were
flushed manually on `rdbLoadRio` and cleaned manually on failure. This contradicts the
assumptions that functions are data and need to be created/deleted alongside with the
data. A side effect of this, for example, `debug reload noflush` did not flush the data but
did flush the functions, `debug loadaof` flush the data but not the functions.
This PR move functions deletion into `emptyDb`. `emptyDb` (renamed to `emptyData`) will
now accept an additional flag, `NOFUNCTIONS` which specifically indicate that we do not
want to flush the functions (on all other cases, functions will be flushed). Used the new flag
on FLUSHALL and FLUSHDB only! Tests were added to `debug reload` and `debug loadaof`
to verify that functions behave the same as the data.
Notice that because now functions will be deleted along side with the data we can not allow
`CLUSTER RESET` to be called from within a function (it will cause the function to be released
while running), this PR adds `NO_SCRIPT` flag to `CLUSTER RESET` so it will not be possible
to be called from within a function. The other cluster commands are allowed from within a
function (there are use-cases that uses `GETKEYSINSLOT` to iterate over all the keys on a
given slot). Tests was added to verify `CLUSTER RESET` is denied from within a script.
Another small change on this PR is that `RDBFLAGS_ALLOW_DUP` is also applicable on functions.
When loading functions, if this flag is set, we will replace old functions with new ones on collisions.
|
| |
|
|
|
|
|
|
|
| |
Added `FUNCTION FLUSH` command. The new sub-command allows delete all the functions.
An optional `[SYNC|ASYNC]` argument can be given to control whether or not to flush the
functions synchronously or asynchronously. if not given the default flush mode is chosen by
`lazyfree-lazy-user-flush` configuration values.
Add the missing `functions.tcl` test to the list of tests that are executed in test_helper.tcl,
and call FUNCTION FLUSH in between servers in external mode
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
|
| |
|
|
|
|
|
|
|
| |
commands (#9945)
Functions are considered data, so changing a function should be counted
as a data change and should affect the persistence policy. For example
if we want to persist an RDB each minute if there was a single change,
functions should be counted as such change. Using `forceCommandPropagation`
will not give us the desired effect and so we must switch to `server.dirty++`
|
|
|
Redis function unit is located inside functions.c
and contains Redis Function implementation:
1. FUNCTION commands:
* FUNCTION CREATE
* FCALL
* FCALL_RO
* FUNCTION DELETE
* FUNCTION KILL
* FUNCTION INFO
2. Register engine
In addition, this commit introduce the first engine
that uses the Redis Function capabilities, the
Lua engine.
|
