From ace86cfaefa5f182535b748803cc8d8a3eb96794 Mon Sep 17 00:00:00 2001 From: antirez Date: Thu, 4 Apr 2013 14:30:05 +0200 Subject: Test: remove useless statements and comments from test default config. --- tests/assets/default.conf | 325 +--------------------------------------------- 1 file changed, 1 insertion(+), 324 deletions(-) (limited to 'tests/assets/default.conf') diff --git a/tests/assets/default.conf b/tests/assets/default.conf index e089880ec..9f95700d1 100644 --- a/tests/assets/default.conf +++ b/tests/assets/default.conf @@ -1,347 +1,24 @@ -# Redis configuration file example +# Redis configuration for testing. -# Note on units: when memory size is needed, it is possible to specifiy -# it in the usual form of 1k 5GB 4M and so forth: -# -# 1k => 1000 bytes -# 1kb => 1024 bytes -# 1m => 1000000 bytes -# 1mb => 1024*1024 bytes -# 1g => 1000000000 bytes -# 1gb => 1024*1024*1024 bytes -# -# units are case insensitive so 1GB 1Gb 1gB are all the same. - -# Enable keyspace events notification for testing so that we cover more code. notify-keyspace-events KEA - -# By default Redis does not run as a daemon. Use 'yes' if you need it. -# Note that Redis will write a pid file in /var/run/redis.pid when daemonized. daemonize no - -# When running daemonized, Redis writes a pid file in /var/run/redis.pid by -# default. You can specify a custom pid file location here. pidfile /var/run/redis.pid - -# Accept connections on the specified port, default is 6379. port 6379 - -# If you want you can bind a single interface, if the bind option is not -# specified all the interfaces will listen for incoming connections. -# -# bind 127.0.0.1 - -# Specify the path for the unix socket that will be used to listen for -# incoming connections. There is no default, so Redis will not listen -# on a unix socket when not specified. -# -# unixsocket /tmp/redis.sock - -# Close the connection after a client is idle for N seconds (0 to disable) timeout 0 - -# Set server verbosity to 'debug' -# it can be one of: -# debug (a lot of information, useful for development/testing) -# verbose (many rarely useful info, but not a mess like the debug level) -# notice (moderately verbose, what you want in production probably) -# warning (only very important / critical messages are logged) loglevel verbose - -# Specify the log file name. Also 'stdout' can be used to force -# Redis to log on the standard output. Note that if you use standard -# output for logging but daemonize, logs will be sent to /dev/null logfile stdout - -# To enable logging to the system logger, just set 'syslog-enabled' to yes, -# and optionally update the other syslog parameters to suit your needs. -# syslog-enabled no - -# Specify the syslog identity. -# syslog-ident redis - -# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7. -# syslog-facility local0 - -# Set the number of databases. The default database is DB 0, you can select -# a different one on a per-connection basis using SELECT where -# dbid is a number between 0 and 'databases'-1 databases 16 -################################ SNAPSHOTTING ################################# -# -# Save the DB on disk: -# -# save -# -# Will save the DB if both the given number of seconds and the given -# number of write operations against the DB occurred. -# -# In the example below the behaviour will be to save: -# after 900 sec (15 min) if at least 1 key changed -# after 300 sec (5 min) if at least 10 keys changed -# after 60 sec if at least 10000 keys changed -# -# Note: you can disable saving at all commenting all the "save" lines. - save 900 1 save 300 10 save 60 10000 -# Compress string objects using LZF when dump .rdb databases? -# For default that's set to 'yes' as it's almost always a win. -# If you want to save some CPU in the saving child set it to 'no' but -# the dataset will likely be bigger if you have compressible values or keys. rdbcompression yes - -# The filename where to dump the DB dbfilename dump.rdb - -# The working directory. -# -# The DB will be written inside this directory, with the filename specified -# above using the 'dbfilename' configuration directive. -# -# Also the Append Only File will be created inside this directory. -# -# Note that you must specify a directory here, not a file name. dir ./ -################################# REPLICATION ################################# - -# Master-Slave replication. Use slaveof to make a Redis instance a copy of -# another Redis server. Note that the configuration is local to the slave -# so for example it is possible to configure the slave to save the DB with a -# different interval, or to listen to another port, and so on. -# -# slaveof - -# If the master is password protected (using the "requirepass" configuration -# directive below) it is possible to tell the slave to authenticate before -# starting the replication synchronization process, otherwise the master will -# refuse the slave request. -# -# masterauth - -# When a slave lost the connection with the master, or when the replication -# is still in progress, the slave can act in two different ways: -# -# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will -# still reply to client requests, possibly with out of data data, or the -# data set may just be empty if this is the first synchronization. -# -# 2) if slave-serve-stale data is set to 'no' the slave will reply with -# an error "SYNC with master in progress" to all the kind of commands -# but to INFO and SLAVEOF. -# slave-serve-stale-data yes - -################################## SECURITY ################################### - -# Require clients to issue AUTH before processing any other -# commands. This might be useful in environments in which you do not trust -# others with access to the host running redis-server. -# -# This should stay commented out for backward compatibility and because most -# people do not need auth (e.g. they run their own servers). -# -# Warning: since Redis is pretty fast an outside user can try up to -# 150k passwords per second against a good box. This means that you should -# use a very strong password otherwise it will be very easy to break. -# -# requirepass foobared - -# Command renaming. -# -# It is possilbe to change the name of dangerous commands in a shared -# environment. For instance the CONFIG command may be renamed into something -# of hard to guess so that it will be still available for internal-use -# tools but not available for general clients. -# -# Example: -# -# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52 -# -# It is also possilbe to completely kill a command renaming it into -# an empty string: -# -# rename-command CONFIG "" - -################################### LIMITS #################################### - -# Set the max number of connected clients at the same time. By default there -# is no limit, and it's up to the number of file descriptors the Redis process -# is able to open. The special value '0' means no limits. -# Once the limit is reached Redis will close all the new connections sending -# an error 'max number of clients reached'. -# -# maxclients 128 - -# Don't use more memory than the specified amount of bytes. -# When the memory limit is reached Redis will try to remove keys with an -# EXPIRE set. It will try to start freeing keys that are going to expire -# in little time and preserve keys with a longer time to live. -# Redis will also try to remove objects from free lists if possible. -# -# If all this fails, Redis will start to reply with errors to commands -# that will use more memory, like SET, LPUSH, and so on, and will continue -# to reply to most read-only commands like GET. -# -# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a -# 'state' server or cache, not as a real DB. When Redis is used as a real -# database the memory usage will grow over the weeks, it will be obvious if -# it is going to use too much memory in the long run, and you'll have the time -# to upgrade. With maxmemory after the limit is reached you'll start to get -# errors for write operations, and this may even lead to DB inconsistency. -# -# maxmemory - -# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory -# is reached? You can select among five behavior: -# -# volatile-lru -> remove the key with an expire set using an LRU algorithm -# allkeys-lru -> remove any key accordingly to the LRU algorithm -# volatile-random -> remove a random key with an expire set -# allkeys->random -> remove a random key, any key -# volatile-ttl -> remove the key with the nearest expire time (minor TTL) -# noeviction -> don't expire at all, just return an error on write operations -# -# Note: with all the kind of policies, Redis will return an error on write -# operations, when there are not suitable keys for eviction. -# -# At the date of writing this commands are: set setnx setex append -# incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd -# sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby -# zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby -# getset mset msetnx exec sort -# -# The default is: -# -# maxmemory-policy volatile-lru - -# LRU and minimal TTL algorithms are not precise algorithms but approximated -# algorithms (in order to save memory), so you can select as well the sample -# size to check. For instance for default Redis will check three keys and -# pick the one that was used less recently, you can change the sample size -# using the following configuration directive. -# -# maxmemory-samples 3 - -############################## APPEND ONLY MODE ############################### - -# By default Redis asynchronously dumps the dataset on disk. If you can live -# with the idea that the latest records will be lost if something like a crash -# happens this is the preferred way to run Redis. If instead you care a lot -# about your data and don't want to that a single record can get lost you should -# enable the append only mode: when this mode is enabled Redis will append -# every write operation received in the file appendonly.aof. This file will -# be read on startup in order to rebuild the full dataset in memory. -# -# Note that you can have both the async dumps and the append only file if you -# like (you have to comment the "save" statements above to disable the dumps). -# Still if append only mode is enabled Redis will load the data from the -# log file at startup ignoring the dump.rdb file. -# -# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append -# log file in background when it gets too big. - appendonly no - -# The name of the append only file (default: "appendonly.aof") -# appendfilename appendonly.aof - -# The fsync() call tells the Operating System to actually write data on disk -# instead to wait for more data in the output buffer. Some OS will really flush -# data on disk, some other OS will just try to do it ASAP. -# -# Redis supports three different modes: -# -# no: don't fsync, just let the OS flush the data when it wants. Faster. -# always: fsync after every write to the append only log . Slow, Safest. -# everysec: fsync only if one second passed since the last fsync. Compromise. -# -# The default is "everysec" that's usually the right compromise between -# speed and data safety. It's up to you to understand if you can relax this to -# "no" that will will let the operating system flush the output buffer when -# it wants, for better performances (but if you can live with the idea of -# some data loss consider the default persistence mode that's snapshotting), -# or on the contrary, use "always" that's very slow but a bit safer than -# everysec. -# -# If unsure, use "everysec". - -# appendfsync always appendfsync everysec -# appendfsync no - -# When the AOF fsync policy is set to always or everysec, and a background -# saving process (a background save or AOF log background rewriting) is -# performing a lot of I/O against the disk, in some Linux configurations -# Redis may block too long on the fsync() call. Note that there is no fix for -# this currently, as even performing fsync in a different thread will block -# our synchronous write(2) call. -# -# In order to mitigate this problem it's possible to use the following option -# that will prevent fsync() from being called in the main process while a -# BGSAVE or BGREWRITEAOF is in progress. -# -# This means that while another child is saving the durability of Redis is -# the same as "appendfsync none", that in pratical terms means that it is -# possible to lost up to 30 seconds of log in the worst scenario (with the -# default Linux settings). -# -# If you have latency problems turn this to "yes". Otherwise leave it as -# "no" that is the safest pick from the point of view of durability. no-appendfsync-on-rewrite no - -############################### ADVANCED CONFIG ############################### - -# Hashes are encoded in a special way (much more memory efficient) when they -# have at max a given number of elements, and the biggest element does not -# exceed a given threshold. You can configure this limits with the following -# configuration directives. -hash-max-ziplist-entries 64 -hash-max-ziplist-value 512 - -# Similarly to hashes, small lists are also encoded in a special way in order -# to save a lot of space. The special representation is only used when -# you are under the following limits: -list-max-ziplist-entries 512 -list-max-ziplist-value 64 - -# Sets have a special encoding in just one case: when a set is composed -# of just strings that happens to be integers in radix 10 in the range -# of 64 bit signed integers. -# The following configuration setting sets the limit in the size of the -# set in order to use this special memory saving encoding. -set-max-intset-entries 512 - -# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in -# order to help rehashing the main Redis hash table (the one mapping top-level -# keys to values). The hash table implementation redis uses (see dict.c) -# performs a lazy rehashing: the more operation you run into an hash table -# that is rehashing, the more rehashing "steps" are performed, so if the -# server is idle the rehashing is never complete and some more memory is used -# by the hash table. -# -# The default is to use this millisecond 10 times every second in order to -# active rehashing the main dictionaries, freeing memory when possible. -# -# If unsure: -# use "activerehashing no" if you have hard latency requirements and it is -# not a good thing in your environment that Redis can reply form time to time -# to queries with 2 milliseconds delay. -# -# use "activerehashing yes" if you don't have such hard requirements but -# want to free memory asap when possible. activerehashing yes - -################################## INCLUDES ################################### - -# Include one or more other config files here. This is useful if you -# have a standard template that goes to all redis server but also need -# to customize a few per-server settings. Include files can include -# other files, so use this wisely. -# -# include /path/to/local.conf -# include /path/to/other.conf -- cgit v1.2.1