From ab72b4833d2054231437acccec36f32f07290075 Mon Sep 17 00:00:00 2001 From: antirez Date: Fri, 14 May 2010 18:48:33 +0200 Subject: minor fixes to the new test suite, html doc updated --- tests/assets/default.conf | 312 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 312 insertions(+) create mode 100644 tests/assets/default.conf (limited to 'tests/assets') diff --git a/tests/assets/default.conf b/tests/assets/default.conf new file mode 100644 index 000000000..c6ae1078e --- /dev/null +++ b/tests/assets/default.conf @@ -0,0 +1,312 @@ +# Redis configuration file example + +# Note on units: when memory size is needed, it is possible to specifiy +# it in the usual form of 1k 5GB 4M and so forth: +# +# 1k => 1000 bytes +# 1kb => 1024 bytes +# 1m => 1000000 bytes +# 1mb => 1024*1024 bytes +# 1g => 1000000000 bytes +# 1gb => 1024*1024*1024 bytes +# +# units are case insensitive so 1GB 1Gb 1gB are all the same. + +# By default Redis does not run as a daemon. Use 'yes' if you need it. +# Note that Redis will write a pid file in /var/run/redis.pid when daemonized. +daemonize no + +# When running daemonized, Redis writes a pid file in /var/run/redis.pid by +# default. You can specify a custom pid file location here. +pidfile redis.pid + +# Accept connections on the specified port, default is 6379 +port 6379 + +# If you want you can bind a single interface, if the bind option is not +# specified all the interfaces will listen for incoming connections. +# +# bind 127.0.0.1 + +# Close the connection after a client is idle for N seconds (0 to disable) +timeout 300 + +# Set server verbosity to 'debug' +# it can be one of: +# debug (a lot of information, useful for development/testing) +# verbose (many rarely useful info, but not a mess like the debug level) +# notice (moderately verbose, what you want in production probably) +# warning (only very important / critical messages are logged) +loglevel verbose + +# Specify the log file name. Also 'stdout' can be used to force +# Redis to log on the standard output. Note that if you use standard +# output for logging but daemonize, logs will be sent to /dev/null +logfile stdout + +# Set the number of databases. The default database is DB 0, you can select +# a different one on a per-connection basis using SELECT where +# dbid is a number between 0 and 'databases'-1 +databases 16 + +################################ SNAPSHOTTING ################################# +# +# Save the DB on disk: +# +# save +# +# Will save the DB if both the given number of seconds and the given +# number of write operations against the DB occurred. +# +# In the example below the behaviour will be to save: +# after 900 sec (15 min) if at least 1 key changed +# after 300 sec (5 min) if at least 10 keys changed +# after 60 sec if at least 10000 keys changed +# +# Note: you can disable saving at all commenting all the "save" lines. + +save 900 1 +save 300 10 +save 60 10000 + +# Compress string objects using LZF when dump .rdb databases? +# For default that's set to 'yes' as it's almost always a win. +# If you want to save some CPU in the saving child set it to 'no' but +# the dataset will likely be bigger if you have compressible values or keys. +rdbcompression yes + +# The filename where to dump the DB +dbfilename dump.rdb + +# The working directory. +# +# The DB will be written inside this directory, with the filename specified +# above using the 'dbfilename' configuration directive. +# +# Also the Append Only File will be created inside this directory. +# +# Note that you must specify a directory here, not a file name. +dir ./test/tmp + +################################# REPLICATION ################################# + +# Master-Slave replication. Use slaveof to make a Redis instance a copy of +# another Redis server. Note that the configuration is local to the slave +# so for example it is possible to configure the slave to save the DB with a +# different interval, or to listen to another port, and so on. +# +# slaveof + +# If the master is password protected (using the "requirepass" configuration +# directive below) it is possible to tell the slave to authenticate before +# starting the replication synchronization process, otherwise the master will +# refuse the slave request. +# +# masterauth + +################################## SECURITY ################################### + +# Require clients to issue AUTH before processing any other +# commands. This might be useful in environments in which you do not trust +# others with access to the host running redis-server. +# +# This should stay commented out for backward compatibility and because most +# people do not need auth (e.g. they run their own servers). +# +# Warning: since Redis is pretty fast an outside user can try up to +# 150k passwords per second against a good box. This means that you should +# use a very strong password otherwise it will be very easy to break. +# +# requirepass foobared + +################################### LIMITS #################################### + +# Set the max number of connected clients at the same time. By default there +# is no limit, and it's up to the number of file descriptors the Redis process +# is able to open. The special value '0' means no limits. +# Once the limit is reached Redis will close all the new connections sending +# an error 'max number of clients reached'. +# +# maxclients 128 + +# Don't use more memory than the specified amount of bytes. +# When the memory limit is reached Redis will try to remove keys with an +# EXPIRE set. It will try to start freeing keys that are going to expire +# in little time and preserve keys with a longer time to live. +# Redis will also try to remove objects from free lists if possible. +# +# If all this fails, Redis will start to reply with errors to commands +# that will use more memory, like SET, LPUSH, and so on, and will continue +# to reply to most read-only commands like GET. +# +# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a +# 'state' server or cache, not as a real DB. When Redis is used as a real +# database the memory usage will grow over the weeks, it will be obvious if +# it is going to use too much memory in the long run, and you'll have the time +# to upgrade. With maxmemory after the limit is reached you'll start to get +# errors for write operations, and this may even lead to DB inconsistency. +# +# maxmemory + +############################## APPEND ONLY MODE ############################### + +# By default Redis asynchronously dumps the dataset on disk. If you can live +# with the idea that the latest records will be lost if something like a crash +# happens this is the preferred way to run Redis. If instead you care a lot +# about your data and don't want to that a single record can get lost you should +# enable the append only mode: when this mode is enabled Redis will append +# every write operation received in the file appendonly.aof. This file will +# be read on startup in order to rebuild the full dataset in memory. +# +# Note that you can have both the async dumps and the append only file if you +# like (you have to comment the "save" statements above to disable the dumps). +# Still if append only mode is enabled Redis will load the data from the +# log file at startup ignoring the dump.rdb file. +# +# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append +# log file in background when it gets too big. + +appendonly no + +# The name of the append only file (default: "appendonly.aof") +# appendfilename appendonly.aof + +# The fsync() call tells the Operating System to actually write data on disk +# instead to wait for more data in the output buffer. Some OS will really flush +# data on disk, some other OS will just try to do it ASAP. +# +# Redis supports three different modes: +# +# no: don't fsync, just let the OS flush the data when it wants. Faster. +# always: fsync after every write to the append only log . Slow, Safest. +# everysec: fsync only if one second passed since the last fsync. Compromise. +# +# The default is "everysec" that's usually the right compromise between +# speed and data safety. It's up to you to understand if you can relax this to +# "no" that will will let the operating system flush the output buffer when +# it wants, for better performances (but if you can live with the idea of +# some data loss consider the default persistence mode that's snapshotting), +# or on the contrary, use "always" that's very slow but a bit safer than +# everysec. +# +# If unsure, use "everysec". + +# appendfsync always +appendfsync everysec +# appendfsync no + +################################ VIRTUAL MEMORY ############################### + +# Virtual Memory allows Redis to work with datasets bigger than the actual +# amount of RAM needed to hold the whole dataset in memory. +# In order to do so very used keys are taken in memory while the other keys +# are swapped into a swap file, similarly to what operating systems do +# with memory pages. +# +# To enable VM just set 'vm-enabled' to yes, and set the following three +# VM parameters accordingly to your needs. + +vm-enabled no +# vm-enabled yes + +# This is the path of the Redis swap file. As you can guess, swap files +# can't be shared by different Redis instances, so make sure to use a swap +# file for every redis process you are running. Redis will complain if the +# swap file is already in use. +# +# The best kind of storage for the Redis swap file (that's accessed at random) +# is a Solid State Disk (SSD). +# +# *** WARNING *** if you are using a shared hosting the default of putting +# the swap file under /tmp is not secure. Create a dir with access granted +# only to Redis user and configure Redis to create the swap file there. +vm-swap-file /tmp/redis.swap + +# vm-max-memory configures the VM to use at max the specified amount of +# RAM. Everything that deos not fit will be swapped on disk *if* possible, that +# is, if there is still enough contiguous space in the swap file. +# +# With vm-max-memory 0 the system will swap everything it can. Not a good +# default, just specify the max amount of RAM you can in bytes, but it's +# better to leave some margin. For instance specify an amount of RAM +# that's more or less between 60 and 80% of your free RAM. +vm-max-memory 0 + +# Redis swap files is split into pages. An object can be saved using multiple +# contiguous pages, but pages can't be shared between different objects. +# So if your page is too big, small objects swapped out on disk will waste +# a lot of space. If you page is too small, there is less space in the swap +# file (assuming you configured the same number of total swap file pages). +# +# If you use a lot of small objects, use a page size of 64 or 32 bytes. +# If you use a lot of big objects, use a bigger page size. +# If unsure, use the default :) +vm-page-size 32 + +# Number of total memory pages in the swap file. +# Given that the page table (a bitmap of free/used pages) is taken in memory, +# every 8 pages on disk will consume 1 byte of RAM. +# +# The total swap size is vm-page-size * vm-pages +# +# With the default of 32-bytes memory pages and 134217728 pages Redis will +# use a 4 GB swap file, that will use 16 MB of RAM for the page table. +# +# It's better to use the smallest acceptable value for your application, +# but the default is large in order to work in most conditions. +vm-pages 134217728 + +# Max number of VM I/O threads running at the same time. +# This threads are used to read/write data from/to swap file, since they +# also encode and decode objects from disk to memory or the reverse, a bigger +# number of threads can help with big objects even if they can't help with +# I/O itself as the physical device may not be able to couple with many +# reads/writes operations at the same time. +# +# The special value of 0 turn off threaded I/O and enables the blocking +# Virtual Memory implementation. +vm-max-threads 4 + +############################### ADVANCED CONFIG ############################### + +# Glue small output buffers together in order to send small replies in a +# single TCP packet. Uses a bit more CPU but most of the times it is a win +# in terms of number of queries per second. Use 'yes' if unsure. +glueoutputbuf yes + +# Hashes are encoded in a special way (much more memory efficient) when they +# have at max a given numer of elements, and the biggest element does not +# exceed a given threshold. You can configure this limits with the following +# configuration directives. +hash-max-zipmap-entries 64 +hash-max-zipmap-value 512 + +# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in +# order to help rehashing the main Redis hash table (the one mapping top-level +# keys to values). The hash table implementation redis uses (see dict.c) +# performs a lazy rehashing: the more operation you run into an hash table +# that is rhashing, the more rehashing "steps" are performed, so if the +# server is idle the rehashing is never complete and some more memory is used +# by the hash table. +# +# The default is to use this millisecond 10 times every second in order to +# active rehashing the main dictionaries, freeing memory when possible. +# +# If unsure: +# use "activerehashing no" if you have hard latency requirements and it is +# not a good thing in your environment that Redis can reply form time to time +# to queries with 2 milliseconds delay. +# +# use "activerehashing yes" if you don't have such hard requirements but +# want to free memory asap when possible. +activerehashing yes + +################################## INCLUDES ################################### + +# Include one or more other config files here. This is useful if you +# have a standard template that goes to all redis server but also need +# to customize a few per-server settings. Include files can include +# other files, so use this wisely. +# +# include /path/to/local.conf +# include /path/to/other.conf -- cgit v1.2.1