/* * Copyright (c) 2009-2012, Salvatore Sanfilippo * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Redis nor the names of its contributors may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include "server.h" #include "atomicvar.h" #include #include #include static void setProtocolError(const char *errstr, client *c); /* Return the size consumed from the allocator, for the specified SDS string, * including internal fragmentation. This function is used in order to compute * the client output buffer size. */ size_t sdsZmallocSize(sds s) { void *sh = sdsAllocPtr(s); return zmalloc_size(sh); } /* Return the amount of memory used by the sds string at object->ptr * for a string object. */ size_t getStringObjectSdsUsedMemory(robj *o) { serverAssertWithInfo(NULL,o,o->type == OBJ_STRING); switch(o->encoding) { case OBJ_ENCODING_RAW: return sdsZmallocSize(o->ptr); case OBJ_ENCODING_EMBSTR: return zmalloc_size(o)-sizeof(robj); default: return 0; /* Just integer encoding for now. */ } } /* Client.reply list dup and free methods. */ void *dupClientReplyValue(void *o) { clientReplyBlock *old = o; clientReplyBlock *buf = zmalloc(sizeof(clientReplyBlock) + old->size); memcpy(buf, o, sizeof(clientReplyBlock) + old->size); return buf; } void freeClientReplyValue(void *o) { zfree(o); } int listMatchObjects(void *a, void *b) { return equalStringObjects(a,b); } /* This function links the client to the global linked list of clients. * unlinkClient() does the opposite, among other things. */ void linkClient(client *c) { listAddNodeTail(server.clients,c); /* Note that we remember the linked list node where the client is stored, * this way removing the client in unlinkClient() will not require * a linear scan, but just a constant time operation. */ c->client_list_node = listLast(server.clients); uint64_t id = htonu64(c->id); raxInsert(server.clients_index,(unsigned char*)&id,sizeof(id),c,NULL); } client *createClient(int fd) { client *c = zmalloc(sizeof(client)); /* passing -1 as fd it is possible to create a non connected client. * This is useful since all the commands needs to be executed * in the context of a client. When commands are executed in other * contexts (for instance a Lua script) we need a non connected client. */ if (fd != -1) { anetNonBlock(NULL,fd); anetEnableTcpNoDelay(NULL,fd); if (server.tcpkeepalive) anetKeepAlive(NULL,fd,server.tcpkeepalive); if (aeCreateFileEvent(server.el,fd,AE_READABLE, readQueryFromClient, c) == AE_ERR) { close(fd); zfree(c); return NULL; } } selectDb(c,0); uint64_t client_id; atomicGetIncr(server.next_client_id,client_id,1); c->id = client_id; c->fd = fd; c->name = NULL; c->bufpos = 0; c->qb_pos = 0; c->querybuf = sdsempty(); c->pending_querybuf = sdsempty(); c->querybuf_peak = 0; c->reqtype = 0; c->argc = 0; c->argv = NULL; c->cmd = c->lastcmd = NULL; c->multibulklen = 0; c->bulklen = -1; c->sentlen = 0; c->flags = 0; c->ctime = c->lastinteraction = server.unixtime; c->authenticated = 0; c->replstate = REPL_STATE_NONE; c->repl_put_online_on_ack = 0; c->reploff = 0; c->read_reploff = 0; c->repl_ack_off = 0; c->repl_ack_time = 0; c->slave_listening_port = 0; c->slave_ip[0] = '\0'; c->slave_capa = SLAVE_CAPA_NONE; c->reply = listCreate(); c->reply_bytes = 0; c->obuf_soft_limit_reached_time = 0; listSetFreeMethod(c->reply,freeClientReplyValue); listSetDupMethod(c->reply,dupClientReplyValue); c->btype = BLOCKED_NONE; c->bpop.timeout = 0; c->bpop.keys = dictCreate(&objectKeyHeapPointerValueDictType,NULL); c->bpop.target = NULL; c->bpop.xread_group = NULL; c->bpop.xread_consumer = NULL; c->bpop.xread_group_noack = 0; c->bpop.numreplicas = 0; c->bpop.reploffset = 0; c->woff = 0; c->watched_keys = listCreate(); c->pubsub_channels = dictCreate(&objectKeyPointerValueDictType,NULL); c->pubsub_patterns = listCreate(); c->peerid = NULL; c->client_list_node = NULL; listSetFreeMethod(c->pubsub_patterns,decrRefCountVoid); listSetMatchMethod(c->pubsub_patterns,listMatchObjects); if (fd != -1) linkClient(c); initClientMultiState(c); return c; } /* This function is called every time we are going to transmit new data * to the client. The behavior is the following: * * If the client should receive new data (normal clients will) the function * returns C_OK, and make sure to install the write handler in our event * loop so that when the socket is writable new data gets written. * * If the client should not receive new data, because it is a fake client * (used to load AOF in memory), a master or because the setup of the write * handler failed, the function returns C_ERR. * * The function may return C_OK without actually installing the write * event handler in the following cases: * * 1) The event handler should already be installed since the output buffer * already contains something. * 2) The client is a slave but not yet online, so we want to just accumulate * writes in the buffer but not actually sending them yet. * * Typically gets called every time a reply is built, before adding more * data to the clients output buffers. If the function returns C_ERR no * data should be appended to the output buffers. */ int prepareClientToWrite(client *c) { /* If it's the Lua client we always return ok without installing any * handler since there is no socket at all. */ if (c->flags & (CLIENT_LUA|CLIENT_MODULE)) return C_OK; /* CLIENT REPLY OFF / SKIP handling: don't send replies. */ if (c->flags & (CLIENT_REPLY_OFF|CLIENT_REPLY_SKIP)) return C_ERR; /* Masters don't receive replies, unless CLIENT_MASTER_FORCE_REPLY flag * is set. */ if ((c->flags & CLIENT_MASTER) && !(c->flags & CLIENT_MASTER_FORCE_REPLY)) return C_ERR; if (c->fd <= 0) return C_ERR; /* Fake client for AOF loading. */ /* Schedule the client to write the output buffers to the socket only * if not already done (there were no pending writes already and the client * was yet not flagged), and, for slaves, if the slave can actually * receive writes at this stage. */ if (!clientHasPendingReplies(c) && !(c->flags & CLIENT_PENDING_WRITE) && (c->replstate == REPL_STATE_NONE || (c->replstate == SLAVE_STATE_ONLINE && !c->repl_put_online_on_ack))) { /* Here instead of installing the write handler, we just flag the * client and put it into a list of clients that have something * to write to the socket. This way before re-entering the event * loop, we can try to directly write to the client sockets avoiding * a system call. We'll only really install the write handler if * we'll not be able to write the whole reply at once. */ c->flags |= CLIENT_PENDING_WRITE; listAddNodeHead(server.clients_pending_write,c); } /* Authorize the caller to queue in the output buffer of this client. */ return C_OK; } /* ----------------------------------------------------------------------------- * Low level functions to add more data to output buffers. * -------------------------------------------------------------------------- */ int _addReplyToBuffer(client *c, const char *s, size_t len) { size_t available = sizeof(c->buf)-c->bufpos; if (c->flags & CLIENT_CLOSE_AFTER_REPLY) return C_OK; /* If there already are entries in the reply list, we cannot * add anything more to the static buffer. */ if (listLength(c->reply) > 0) return C_ERR; /* Check that the buffer has enough space available for this string. */ if (len > available) return C_ERR; memcpy(c->buf+c->bufpos,s,len); c->bufpos+=len; return C_OK; } void _addReplyStringToList(client *c, const char *s, size_t len) { if (c->flags & CLIENT_CLOSE_AFTER_REPLY) return; listNode *ln = listLast(c->reply); clientReplyBlock *tail = ln? listNodeValue(ln): NULL; /* Note that 'tail' may be NULL even if we have a tail node, becuase when * addDeferredMultiBulkLength() is used, it sets a dummy node to NULL just * fo fill it later, when the size of the bulk length is set. */ /* Append to tail string when possible. */ if (tail) { /* Copy the part we can fit into the tail, and leave the rest for a * new node */ size_t avail = tail->size - tail->used; size_t copy = avail >= len? len: avail; memcpy(tail->buf + tail->used, s, copy); tail->used += copy; s += copy; len -= copy; } if (len) { /* Create a new node, make sure it is allocated to at * least PROTO_REPLY_CHUNK_BYTES */ size_t size = len < PROTO_REPLY_CHUNK_BYTES? PROTO_REPLY_CHUNK_BYTES: len; tail = zmalloc(size + sizeof(clientReplyBlock)); /* take over the allocation's internal fragmentation */ tail->size = zmalloc_usable(tail) - sizeof(clientReplyBlock); tail->used = len; memcpy(tail->buf, s, len); listAddNodeTail(c->reply, tail); c->reply_bytes += tail->size; } asyncCloseClientOnOutputBufferLimitReached(c); } /* ----------------------------------------------------------------------------- * Higher level functions to queue data on the client output buffer. * The following functions are the ones that commands implementations will call. * -------------------------------------------------------------------------- */ /* Add the object 'obj' string representation to the client output buffer. */ void addReply(client *c, robj *obj) { if (prepareClientToWrite(c) != C_OK) return; if (sdsEncodedObject(obj)) { if (_addReplyToBuffer(c,obj->ptr,sdslen(obj->ptr)) != C_OK) _addReplyStringToList(c,obj->ptr,sdslen(obj->ptr)); } else if (obj->encoding == OBJ_ENCODING_INT) { /* For integer encoded strings we just convert it into a string * using our optimized function, and attach the resulting string * to the output buffer. */ char buf[32]; size_t len = ll2string(buf,sizeof(buf),(long)obj->ptr); if (_addReplyToBuffer(c,buf,len) != C_OK) _addReplyStringToList(c,buf,len); } else { serverPanic("Wrong obj->encoding in addReply()"); } } /* Add the SDS 's' string to the client output buffer, as a side effect * the SDS string is freed. */ void addReplySds(client *c, sds s) { if (prepareClientToWrite(c) != C_OK) { /* The caller expects the sds to be free'd. */ sdsfree(s); return; } if (_addReplyToBuffer(c,s,sdslen(s)) != C_OK) _addReplyStringToList(c,s,sdslen(s)); sdsfree(s); } /* This low level function just adds whatever protocol you send it to the * client buffer, trying the static buffer initially, and using the string * of objects if not possible. * * It is efficient because does not create an SDS object nor an Redis object * if not needed. The object will only be created by calling * _addReplyStringToList() if we fail to extend the existing tail object * in the list of objects. */ void addReplyString(client *c, const char *s, size_t len) { if (prepareClientToWrite(c) != C_OK) return; if (_addReplyToBuffer(c,s,len) != C_OK) _addReplyStringToList(c,s,len); } /* Low level function called by the addReplyError...() functions. * It emits the protocol for a Redis error, in the form: * * -ERRORCODE Error Message * * If the error code is already passed in the string 's', the error * code provided is used, otherwise the string "-ERR " for the generic * error code is automatically added. */ void addReplyErrorLength(client *c, const char *s, size_t len) { /* If the string already starts with "-..." then the error code * is provided by the caller. Otherwise we use "-ERR". */ if (!len || s[0] != '-') addReplyString(c,"-ERR ",5); addReplyString(c,s,len); addReplyString(c,"\r\n",2); /* Sometimes it could be normal that a slave replies to a master with * an error and this function gets called. Actually the error will never * be sent because addReply*() against master clients has no effect... * A notable example is: * * EVAL 'redis.call("incr",KEYS[1]); redis.call("nonexisting")' 1 x * * Where the master must propagate the first change even if the second * will produce an error. However it is useful to log such events since * they are rare and may hint at errors in a script or a bug in Redis. */ if (c->flags & (CLIENT_MASTER|CLIENT_SLAVE)) { char* to = c->flags & CLIENT_MASTER? "master": "replica"; char* from = c->flags & CLIENT_MASTER? "replica": "master"; char *cmdname = c->lastcmd ? c->lastcmd->name : ""; serverLog(LL_WARNING,"== CRITICAL == This %s is sending an error " "to its %s: '%s' after processing the command " "'%s'", from, to, s, cmdname); /* Here we want to panic because when a master is sending an * error to some slave in the context of replication, this can * only create some kind of offset or data desynchronization. Better * to catch it ASAP and crash instead of continuing. */ if (c->flags & CLIENT_SLAVE) serverPanic("Continuing is unsafe: replication protocol violation."); } } void addReplyError(client *c, const char *err) { addReplyErrorLength(c,err,strlen(err)); } void addReplyErrorFormat(client *c, const char *fmt, ...) { size_t l, j; va_list ap; va_start(ap,fmt); sds s = sdscatvprintf(sdsempty(),fmt,ap); va_end(ap); /* Make sure there are no newlines in the string, otherwise invalid protocol * is emitted. */ l = sdslen(s); for (j = 0; j < l; j++) { if (s[j] == '\r' || s[j] == '\n') s[j] = ' '; } addReplyErrorLength(c,s,sdslen(s)); sdsfree(s); } void addReplyStatusLength(client *c, const char *s, size_t len) { addReplyString(c,"+",1); addReplyString(c,s,len); addReplyString(c,"\r\n",2); } void addReplyStatus(client *c, const char *status) { addReplyStatusLength(c,status,strlen(status)); } void addReplyStatusFormat(client *c, const char *fmt, ...) { va_list ap; va_start(ap,fmt); sds s = sdscatvprintf(sdsempty(),fmt,ap); va_end(ap); addReplyStatusLength(c,s,sdslen(s)); sdsfree(s); } /* Adds an empty object to the reply list that will contain the multi bulk * length, which is not known when this function is called. */ void *addDeferredMultiBulkLength(client *c) { /* Note that we install the write event here even if the object is not * ready to be sent, since we are sure that before returning to the * event loop setDeferredMultiBulkLength() will be called. */ if (prepareClientToWrite(c) != C_OK) return NULL; listAddNodeTail(c->reply,NULL); /* NULL is our placeholder. */ return listLast(c->reply); } /* Populate the length object and try gluing it to the next chunk. */ void setDeferredMultiBulkLength(client *c, void *node, long length) { listNode *ln = (listNode*)node; clientReplyBlock *next; char lenstr[128]; size_t lenstr_len = sprintf(lenstr, "*%ld\r\n", length); /* Abort when *node is NULL: when the client should not accept writes * we return NULL in addDeferredMultiBulkLength() */ if (node == NULL) return; serverAssert(!listNodeValue(ln)); /* Normally we fill this dummy NULL node, added by addDeferredMultiBulkLength(), * with a new buffer structure containing the protocol needed to specify * the length of the array following. However sometimes when there is * little memory to move, we may instead remove this NULL node, and prefix * our protocol in the node immediately after to it, in order to save a * write(2) syscall later. Conditions needed to do it: * * - The next node is non-NULL, * - It has enough room already allocated * - And not too large (avoid large memmove) */ if (ln->next != NULL && (next = listNodeValue(ln->next)) && next->size - next->used >= lenstr_len && next->used < PROTO_REPLY_CHUNK_BYTES * 4) { memmove(next->buf + lenstr_len, next->buf, next->used); memcpy(next->buf, lenstr, lenstr_len); next->used += lenstr_len; listDelNode(c->reply,ln); } else { /* Create a new node */ clientReplyBlock *buf = zmalloc(lenstr_len + sizeof(clientReplyBlock)); /* Take over the allocation's internal fragmentation */ buf->size = zmalloc_usable(buf) - sizeof(clientReplyBlock); buf->used = lenstr_len; memcpy(buf->buf, lenstr, lenstr_len); listNodeValue(ln) = buf; c->reply_bytes += buf->size; } asyncCloseClientOnOutputBufferLimitReached(c); } /* Add a double as a bulk reply */ void addReplyDouble(client *c, double d) { char dbuf[128], sbuf[128]; int dlen, slen; if (isinf(d)) { /* Libc in odd systems (Hi Solaris!) will format infinite in a * different way, so better to handle it in an explicit way. */ addReplyBulkCString(c, d > 0 ? "inf" : "-inf"); } else { dlen = snprintf(dbuf,sizeof(dbuf),"%.17g",d); slen = snprintf(sbuf,sizeof(sbuf),"$%d\r\n%s\r\n",dlen,dbuf); addReplyString(c,sbuf,slen); } } /* Add a long double as a bulk reply, but uses a human readable formatting * of the double instead of exposing the crude behavior of doubles to the * dear user. */ void addReplyHumanLongDouble(client *c, long double d) { robj *o = createStringObjectFromLongDouble(d,1); addReplyBulk(c,o); decrRefCount(o); } /* Add a long long as integer reply or bulk len / multi bulk count. * Basically this is used to output . */ void addReplyLongLongWithPrefix(client *c, long long ll, char prefix) { char buf[128]; int len; /* Things like $3\r\n or *2\r\n are emitted very often by the protocol * so we have a few shared objects to use if the integer is small * like it is most of the times. */ if (prefix == '*' && ll < OBJ_SHARED_BULKHDR_LEN && ll >= 0) { addReply(c,shared.mbulkhdr[ll]); return; } else if (prefix == '$' && ll < OBJ_SHARED_BULKHDR_LEN && ll >= 0) { addReply(c,shared.bulkhdr[ll]); return; } buf[0] = prefix; len = ll2string(buf+1,sizeof(buf)-1,ll); buf[len+1] = '\r'; buf[len+2] = '\n'; addReplyString(c,buf,len+3); } void addReplyLongLong(client *c, long long ll) { if (ll == 0) addReply(c,shared.czero); else if (ll == 1) addReply(c,shared.cone); else addReplyLongLongWithPrefix(c,ll,':'); } void addReplyMultiBulkLen(client *c, long length) { if (length < OBJ_SHARED_BULKHDR_LEN) addReply(c,shared.mbulkhdr[length]); else addReplyLongLongWithPrefix(c,length,'*'); } /* Create the length prefix of a bulk reply, example: $2234 */ void addReplyBulkLen(client *c, robj *obj) { size_t len; if (sdsEncodedObject(obj)) { len = sdslen(obj->ptr); } else { long n = (long)obj->ptr; /* Compute how many bytes will take this integer as a radix 10 string */ len = 1; if (n < 0) { len++; n = -n; } while((n = n/10) != 0) { len++; } } if (len < OBJ_SHARED_BULKHDR_LEN) addReply(c,shared.bulkhdr[len]); else addReplyLongLongWithPrefix(c,len,'$'); } /* Add a Redis Object as a bulk reply */ void addReplyBulk(client *c, robj *obj) { addReplyBulkLen(c,obj); addReply(c,obj); addReply(c,shared.crlf); } /* Add a C buffer as bulk reply */ void addReplyBulkCBuffer(client *c, const void *p, size_t len) { addReplyLongLongWithPrefix(c,len,'$'); addReplyString(c,p,len); addReply(c,shared.crlf); } /* Add sds to reply (takes ownership of sds and frees it) */ void addReplyBulkSds(client *c, sds s) { addReplyLongLongWithPrefix(c,sdslen(s),'$'); addReplySds(c,s); addReply(c,shared.crlf); } /* Add a C null term string as bulk reply */ void addReplyBulkCString(client *c, const char *s) { if (s == NULL) { addReply(c,shared.nullbulk); } else { addReplyBulkCBuffer(c,s,strlen(s)); } } /* Add a long long as a bulk reply */ void addReplyBulkLongLong(client *c, long long ll) { char buf[64]; int len; len = ll2string(buf,64,ll); addReplyBulkCBuffer(c,buf,len); } /* Add an array of C strings as status replies with a heading. * This function is typically invoked by from commands that support * subcommands in response to the 'help' subcommand. The help array * is terminated by NULL sentinel. */ void addReplyHelp(client *c, const char **help) { sds cmd = sdsnew((char*) c->argv[0]->ptr); void *blenp = addDeferredMultiBulkLength(c); int blen = 0; sdstoupper(cmd); addReplyStatusFormat(c, "%s arg arg ... arg. Subcommands are:",cmd); sdsfree(cmd); while (help[blen]) addReplyStatus(c,help[blen++]); blen++; /* Account for the header line(s). */ setDeferredMultiBulkLength(c,blenp,blen); } /* Add a suggestive error reply. * This function is typically invoked by from commands that support * subcommands in response to an unknown subcommand or argument error. */ void addReplySubcommandSyntaxError(client *c) { sds cmd = sdsnew((char*) c->argv[0]->ptr); sdstoupper(cmd); addReplyErrorFormat(c, "Unknown subcommand or wrong number of arguments for '%s'. Try %s HELP.", (char*)c->argv[1]->ptr,cmd); sdsfree(cmd); } /* Copy 'src' client output buffers into 'dst' client output buffers. * The function takes care of freeing the old output buffers of the * destination client. */ void copyClientOutputBuffer(client *dst, client *src) { listRelease(dst->reply); dst->sentlen = 0; dst->reply = listDup(src->reply); memcpy(dst->buf,src->buf,src->bufpos); dst->bufpos = src->bufpos; dst->reply_bytes = src->reply_bytes; } /* Return true if the specified client has pending reply buffers to write to * the socket. */ int clientHasPendingReplies(client *c) { return c->bufpos || listLength(c->reply); } #define MAX_ACCEPTS_PER_CALL 1000 static void acceptCommonHandler(int fd, int flags, char *ip) { client *c; if ((c = createClient(fd)) == NULL) { serverLog(LL_WARNING, "Error registering fd event for the new client: %s (fd=%d)", strerror(errno),fd); close(fd); /* May be already closed, just ignore errors */ return; } /* If maxclient directive is set and this is one client more... close the * connection. Note that we create the client instead to check before * for this condition, since now the socket is already set in non-blocking * mode and we can send an error for free using the Kernel I/O */ if (listLength(server.clients) > server.maxclients) { char *err = "-ERR max number of clients reached\r\n"; /* That's a best effort error message, don't check write errors */ if (write(c->fd,err,strlen(err)) == -1) { /* Nothing to do, Just to avoid the warning... */ } server.stat_rejected_conn++; freeClient(c); return; } /* If the server is running in protected mode (the default) and there * is no password set, nor a specific interface is bound, we don't accept * requests from non loopback interfaces. Instead we try to explain the * user what to do to fix it if needed. */ if (server.protected_mode && server.bindaddr_count == 0 && server.requirepass == NULL && !(flags & CLIENT_UNIX_SOCKET) && ip != NULL) { if (strcmp(ip,"127.0.0.1") && strcmp(ip,"::1")) { char *err = "-DENIED Redis is running in protected mode because protected " "mode is enabled, no bind address was specified, no " "authentication password is requested to clients. In this mode " "connections are only accepted from the loopback interface. " "If you want to connect from external computers to Redis you " "may adopt one of the following solutions: " "1) Just disable protected mode sending the command " "'CONFIG SET protected-mode no' from the loopback interface " "by connecting to Redis from the same host the server is " "running, however MAKE SURE Redis is not publicly accessible " "from internet if you do so. Use CONFIG REWRITE to make this " "change permanent. " "2) Alternatively you can just disable the protected mode by " "editing the Redis configuration file, and setting the protected " "mode option to 'no', and then restarting the server. " "3) If you started the server manually just for testing, restart " "it with the '--protected-mode no' option. " "4) Setup a bind address or an authentication password. " "NOTE: You only need to do one of the above things in order for " "the server to start accepting connections from the outside.\r\n"; if (write(c->fd,err,strlen(err)) == -1) { /* Nothing to do, Just to avoid the warning... */ } server.stat_rejected_conn++; freeClient(c); return; } } server.stat_numconnections++; c->flags |= flags; } void acceptTcpHandler(aeEventLoop *el, int fd, void *privdata, int mask) { int cport, cfd, max = MAX_ACCEPTS_PER_CALL; char cip[NET_IP_STR_LEN]; UNUSED(el); UNUSED(mask); UNUSED(privdata); while(max--) { cfd = anetTcpAccept(server.neterr, fd, cip, sizeof(cip), &cport); if (cfd == ANET_ERR) { if (errno != EWOULDBLOCK) serverLog(LL_WARNING, "Accepting client connection: %s", server.neterr); return; } serverLog(LL_VERBOSE,"Accepted %s:%d", cip, cport); acceptCommonHandler(cfd,0,cip); } } void acceptUnixHandler(aeEventLoop *el, int fd, void *privdata, int mask) { int cfd, max = MAX_ACCEPTS_PER_CALL; UNUSED(el); UNUSED(mask); UNUSED(privdata); while(max--) { cfd = anetUnixAccept(server.neterr, fd); if (cfd == ANET_ERR) { if (errno != EWOULDBLOCK) serverLog(LL_WARNING, "Accepting client connection: %s", server.neterr); return; } serverLog(LL_VERBOSE,"Accepted connection to %s", server.unixsocket); acceptCommonHandler(cfd,CLIENT_UNIX_SOCKET,NULL); } } static void freeClientArgv(client *c) { int j; for (j = 0; j < c->argc; j++) decrRefCount(c->argv[j]); c->argc = 0; c->cmd = NULL; } /* Close all the slaves connections. This is useful in chained replication * when we resync with our own master and want to force all our slaves to * resync with us as well. */ void disconnectSlaves(void) { while (listLength(server.slaves)) { listNode *ln = listFirst(server.slaves); freeClient((client*)ln->value); } } /* Remove the specified client from global lists where the client could * be referenced, not including the Pub/Sub channels. * This is used by freeClient() and replicationCacheMaster(). */ void unlinkClient(client *c) { listNode *ln; /* If this is marked as current client unset it. */ if (server.current_client == c) server.current_client = NULL; /* Certain operations must be done only if the client has an active socket. * If the client was already unlinked or if it's a "fake client" the * fd is already set to -1. */ if (c->fd != -1) { /* Remove from the list of active clients. */ if (c->client_list_node) { uint64_t id = htonu64(c->id); raxRemove(server.clients_index,(unsigned char*)&id,sizeof(id),NULL); listDelNode(server.clients,c->client_list_node); c->client_list_node = NULL; } /* Unregister async I/O handlers and close the socket. */ aeDeleteFileEvent(server.el,c->fd,AE_READABLE); aeDeleteFileEvent(server.el,c->fd,AE_WRITABLE); close(c->fd); c->fd = -1; } /* Remove from the list of pending writes if needed. */ if (c->flags & CLIENT_PENDING_WRITE) { ln = listSearchKey(server.clients_pending_write,c); serverAssert(ln != NULL); listDelNode(server.clients_pending_write,ln); c->flags &= ~CLIENT_PENDING_WRITE; } /* When client was just unblocked because of a blocking operation, * remove it from the list of unblocked clients. */ if (c->flags & CLIENT_UNBLOCKED) { ln = listSearchKey(server.unblocked_clients,c); serverAssert(ln != NULL); listDelNode(server.unblocked_clients,ln); c->flags &= ~CLIENT_UNBLOCKED; } } void freeClient(client *c) { listNode *ln; /* If it is our master that's beging disconnected we should make sure * to cache the state to try a partial resynchronization later. * * Note that before doing this we make sure that the client is not in * some unexpected state, by checking its flags. */ if (server.master && c->flags & CLIENT_MASTER) { serverLog(LL_WARNING,"Connection with master lost."); if (!(c->flags & (CLIENT_CLOSE_AFTER_REPLY| CLIENT_CLOSE_ASAP| CLIENT_BLOCKED))) { replicationCacheMaster(c); return; } } /* Log link disconnection with slave */ if ((c->flags & CLIENT_SLAVE) && !(c->flags & CLIENT_MONITOR)) { serverLog(LL_WARNING,"Connection with replica %s lost.", replicationGetSlaveName(c)); } /* Free the query buffer */ sdsfree(c->querybuf); sdsfree(c->pending_querybuf); c->querybuf = NULL; /* Deallocate structures used to block on blocking ops. */ if (c->flags & CLIENT_BLOCKED) unblockClient(c); dictRelease(c->bpop.keys); /* UNWATCH all the keys */ unwatchAllKeys(c); listRelease(c->watched_keys); /* Unsubscribe from all the pubsub channels */ pubsubUnsubscribeAllChannels(c,0); pubsubUnsubscribeAllPatterns(c,0); dictRelease(c->pubsub_channels); listRelease(c->pubsub_patterns); /* Free data structures. */ listRelease(c->reply); freeClientArgv(c); /* Unlink the client: this will close the socket, remove the I/O * handlers, and remove references of the client from different * places where active clients may be referenced. */ unlinkClient(c); /* Master/slave cleanup Case 1: * we lost the connection with a slave. */ if (c->flags & CLIENT_SLAVE) { if (c->replstate == SLAVE_STATE_SEND_BULK) { if (c->repldbfd != -1) close(c->repldbfd); if (c->replpreamble) sdsfree(c->replpreamble); } list *l = (c->flags & CLIENT_MONITOR) ? server.monitors : server.slaves; ln = listSearchKey(l,c); serverAssert(ln != NULL); listDelNode(l,ln); /* We need to remember the time when we started to have zero * attached slaves, as after some time we'll free the replication * backlog. */ if (c->flags & CLIENT_SLAVE && listLength(server.slaves) == 0) server.repl_no_slaves_since = server.unixtime; refreshGoodSlavesCount(); } /* Master/slave cleanup Case 2: * we lost the connection with the master. */ if (c->flags & CLIENT_MASTER) replicationHandleMasterDisconnection(); /* If this client was scheduled for async freeing we need to remove it * from the queue. */ if (c->flags & CLIENT_CLOSE_ASAP) { ln = listSearchKey(server.clients_to_close,c); serverAssert(ln != NULL); listDelNode(server.clients_to_close,ln); } /* Release other dynamically allocated client structure fields, * and finally release the client structure itself. */ if (c->name) decrRefCount(c->name); zfree(c->argv); freeClientMultiState(c); sdsfree(c->peerid); zfree(c); } /* Schedule a client to free it at a safe time in the serverCron() function. * This function is useful when we need to terminate a client but we are in * a context where calling freeClient() is not possible, because the client * should be valid for the continuation of the flow of the program. */ void freeClientAsync(client *c) { if (c->flags & CLIENT_CLOSE_ASAP || c->flags & CLIENT_LUA) return; c->flags |= CLIENT_CLOSE_ASAP; listAddNodeTail(server.clients_to_close,c); } void freeClientsInAsyncFreeQueue(void) { while (listLength(server.clients_to_close)) { listNode *ln = listFirst(server.clients_to_close); client *c = listNodeValue(ln); c->flags &= ~CLIENT_CLOSE_ASAP; freeClient(c); listDelNode(server.clients_to_close,ln); } } /* Return a client by ID, or NULL if the client ID is not in the set * of registered clients. Note that "fake clients", created with -1 as FD, * are not registered clients. */ client *lookupClientByID(uint64_t id) { id = htonu64(id); client *c = raxFind(server.clients_index,(unsigned char*)&id,sizeof(id)); return (c == raxNotFound) ? NULL : c; } /* Write data in output buffers to client. Return C_OK if the client * is still valid after the call, C_ERR if it was freed. */ int writeToClient(int fd, client *c, int handler_installed) { ssize_t nwritten = 0, totwritten = 0; size_t objlen; clientReplyBlock *o; while(clientHasPendingReplies(c)) { if (c->bufpos > 0) { nwritten = write(fd,c->buf+c->sentlen,c->bufpos-c->sentlen); if (nwritten <= 0) break; c->sentlen += nwritten; totwritten += nwritten; /* If the buffer was sent, set bufpos to zero to continue with * the remainder of the reply. */ if ((int)c->sentlen == c->bufpos) { c->bufpos = 0; c->sentlen = 0; } } else { o = listNodeValue(listFirst(c->reply)); objlen = o->used; if (objlen == 0) { c->reply_bytes -= o->size; listDelNode(c->reply,listFirst(c->reply)); continue; } nwritten = write(fd, o->buf + c->sentlen, objlen - c->sentlen); if (nwritten <= 0) break; c->sentlen += nwritten; totwritten += nwritten; /* If we fully sent the object on head go to the next one */ if (c->sentlen == objlen) { c->reply_bytes -= o->size; listDelNode(c->reply,listFirst(c->reply)); c->sentlen = 0; /* If there are no longer objects in the list, we expect * the count of reply bytes to be exactly zero. */ if (listLength(c->reply) == 0) serverAssert(c->reply_bytes == 0); } } /* Note that we avoid to send more than NET_MAX_WRITES_PER_EVENT * bytes, in a single threaded server it's a good idea to serve * other clients as well, even if a very large request comes from * super fast link that is always able to accept data (in real world * scenario think about 'KEYS *' against the loopback interface). * * However if we are over the maxmemory limit we ignore that and * just deliver as much data as it is possible to deliver. * * Moreover, we also send as much as possible if the client is * a slave (otherwise, on high-speed traffic, the replication * buffer will grow indefinitely) */ if (totwritten > NET_MAX_WRITES_PER_EVENT && (server.maxmemory == 0 || zmalloc_used_memory() < server.maxmemory) && !(c->flags & CLIENT_SLAVE)) break; } server.stat_net_output_bytes += totwritten; if (nwritten == -1) { if (errno == EAGAIN) { nwritten = 0; } else { serverLog(LL_VERBOSE, "Error writing to client: %s", strerror(errno)); freeClient(c); return C_ERR; } } if (totwritten > 0) { /* For clients representing masters we don't count sending data * as an interaction, since we always send REPLCONF ACK commands * that take some time to just fill the socket output buffer. * We just rely on data / pings received for timeout detection. */ if (!(c->flags & CLIENT_MASTER)) c->lastinteraction = server.unixtime; } if (!clientHasPendingReplies(c)) { c->sentlen = 0; if (handler_installed) aeDeleteFileEvent(server.el,c->fd,AE_WRITABLE); /* Close connection after entire reply has been sent. */ if (c->flags & CLIENT_CLOSE_AFTER_REPLY) { freeClient(c); return C_ERR; } } return C_OK; } /* Write event handler. Just send data to the client. */ void sendReplyToClient(aeEventLoop *el, int fd, void *privdata, int mask) { UNUSED(el); UNUSED(mask); writeToClient(fd,privdata,1); } /* This function is called just before entering the event loop, in the hope * we can just write the replies to the client output buffer without any * need to use a syscall in order to install the writable event handler, * get it called, and so forth. */ int handleClientsWithPendingWrites(void) { listIter li; listNode *ln; int processed = listLength(server.clients_pending_write); listRewind(server.clients_pending_write,&li); while((ln = listNext(&li))) { client *c = listNodeValue(ln); c->flags &= ~CLIENT_PENDING_WRITE; listDelNode(server.clients_pending_write,ln); /* Try to write buffers to the client socket. */ if (writeToClient(c->fd,c,0) == C_ERR) continue; /* If after the synchronous writes above we still have data to * output to the client, we need to install the writable handler. */ if (clientHasPendingReplies(c)) { int ae_flags = AE_WRITABLE; /* For the fsync=always policy, we want that a given FD is never * served for reading and writing in the same event loop iteration, * so that in the middle of receiving the query, and serving it * to the client, we'll call beforeSleep() that will do the * actual fsync of AOF to disk. AE_BARRIER ensures that. */ if (server.aof_state == AOF_ON && server.aof_fsync == AOF_FSYNC_ALWAYS) { ae_flags |= AE_BARRIER; } if (aeCreateFileEvent(server.el, c->fd, ae_flags, sendReplyToClient, c) == AE_ERR) { freeClientAsync(c); } } } return processed; } /* resetClient prepare the client to process the next command */ void resetClient(client *c) { redisCommandProc *prevcmd = c->cmd ? c->cmd->proc : NULL; freeClientArgv(c); c->reqtype = 0; c->multibulklen = 0; c->bulklen = -1; /* We clear the ASKING flag as well if we are not inside a MULTI, and * if what we just executed is not the ASKING command itself. */ if (!(c->flags & CLIENT_MULTI) && prevcmd != askingCommand) c->flags &= ~CLIENT_ASKING; /* Remove the CLIENT_REPLY_SKIP flag if any so that the reply * to the next command will be sent, but set the flag if the command * we just processed was "CLIENT REPLY SKIP". */ c->flags &= ~CLIENT_REPLY_SKIP; if (c->flags & CLIENT_REPLY_SKIP_NEXT) { c->flags |= CLIENT_REPLY_SKIP; c->flags &= ~CLIENT_REPLY_SKIP_NEXT; } } /* Like processMultibulkBuffer(), but for the inline protocol instead of RESP, * this function consumes the client query buffer and creates a command ready * to be executed inside the client structure. Returns C_OK if the command * is ready to be executed, or C_ERR if there is still protocol to read to * have a well formed command. The function also returns C_ERR when there is * a protocol error: in such a case the client structure is setup to reply * with the error and close the connection. */ int processInlineBuffer(client *c) { char *newline; int argc, j, linefeed_chars = 1; sds *argv, aux; size_t querylen; /* Search for end of line */ newline = strchr(c->querybuf+c->qb_pos,'\n'); /* Nothing to do without a \r\n */ if (newline == NULL) { if (sdslen(c->querybuf)-c->qb_pos > PROTO_INLINE_MAX_SIZE) { addReplyError(c,"Protocol error: too big inline request"); setProtocolError("too big inline request",c); } return C_ERR; } /* Handle the \r\n case. */ if (newline && newline != c->querybuf+c->qb_pos && *(newline-1) == '\r') newline--, linefeed_chars++; /* Split the input buffer up to the \r\n */ querylen = newline-(c->querybuf+c->qb_pos); aux = sdsnewlen(c->querybuf+c->qb_pos,querylen); argv = sdssplitargs(aux,&argc); sdsfree(aux); if (argv == NULL) { addReplyError(c,"Protocol error: unbalanced quotes in request"); setProtocolError("unbalanced quotes in inline request",c); return C_ERR; } /* Newline from slaves can be used to refresh the last ACK time. * This is useful for a slave to ping back while loading a big * RDB file. */ if (querylen == 0 && c->flags & CLIENT_SLAVE) c->repl_ack_time = server.unixtime; /* Move querybuffer position to the next query in the buffer. */ c->qb_pos += querylen+linefeed_chars; /* Setup argv array on client structure */ if (argc) { if (c->argv) zfree(c->argv); c->argv = zmalloc(sizeof(robj*)*argc); } /* Create redis objects for all arguments. */ for (c->argc = 0, j = 0; j < argc; j++) { if (sdslen(argv[j])) { c->argv[c->argc] = createObject(OBJ_STRING,argv[j]); c->argc++; } else { sdsfree(argv[j]); } } zfree(argv); return C_OK; } /* Helper function. Record protocol erro details in server log, * and set the client as CLIENT_CLOSE_AFTER_REPLY. */ #define PROTO_DUMP_LEN 128 static void setProtocolError(const char *errstr, client *c) { if (server.verbosity <= LL_VERBOSE) { sds client = catClientInfoString(sdsempty(),c); /* Sample some protocol to given an idea about what was inside. */ char buf[256]; if (sdslen(c->querybuf)-c->qb_pos < PROTO_DUMP_LEN) { snprintf(buf,sizeof(buf),"Query buffer during protocol error: '%s'", c->querybuf+c->qb_pos); } else { snprintf(buf,sizeof(buf),"Query buffer during protocol error: '%.*s' (... more %zu bytes ...) '%.*s'", PROTO_DUMP_LEN/2, c->querybuf+c->qb_pos, sdslen(c->querybuf)-c->qb_pos-PROTO_DUMP_LEN, PROTO_DUMP_LEN/2, c->querybuf+sdslen(c->querybuf)-PROTO_DUMP_LEN/2); } /* Remove non printable chars. */ char *p = buf; while (*p != '\0') { if (!isprint(*p)) *p = '.'; p++; } /* Log all the client and protocol info. */ serverLog(LL_VERBOSE, "Protocol error (%s) from client: %s. %s", errstr, client, buf); sdsfree(client); } c->flags |= CLIENT_CLOSE_AFTER_REPLY; } /* Process the query buffer for client 'c', setting up the client argument * vector for command execution. Returns C_OK if after running the function * the client has a well-formed ready to be processed command, otherwise * C_ERR if there is still to read more buffer to get the full command. * The function also returns C_ERR when there is a protocol error: in such a * case the client structure is setup to reply with the error and close * the connection. * * This function is called if processInputBuffer() detects that the next * command is in RESP format, so the first byte in the command is found * to be '*'. Otherwise for inline commands processInlineBuffer() is called. */ int processMultibulkBuffer(client *c) { char *newline = NULL; int ok; long long ll; if (c->multibulklen == 0) { /* The client should have been reset */ serverAssertWithInfo(c,NULL,c->argc == 0); /* Multi bulk length cannot be read without a \r\n */ newline = strchr(c->querybuf+c->qb_pos,'\r'); if (newline == NULL) { if (sdslen(c->querybuf)-c->qb_pos > PROTO_INLINE_MAX_SIZE) { addReplyError(c,"Protocol error: too big mbulk count string"); setProtocolError("too big mbulk count string",c); } return C_ERR; } /* Buffer should also contain \n */ if (newline-(c->querybuf+c->qb_pos) > (ssize_t)(sdslen(c->querybuf)-c->qb_pos-2)) return C_ERR; /* We know for sure there is a whole line since newline != NULL, * so go ahead and find out the multi bulk length. */ serverAssertWithInfo(c,NULL,c->querybuf[c->qb_pos] == '*'); ok = string2ll(c->querybuf+1+c->qb_pos,newline-(c->querybuf+1+c->qb_pos),&ll); if (!ok || ll > 1024*1024) { addReplyError(c,"Protocol error: invalid multibulk length"); setProtocolError("invalid mbulk count",c); return C_ERR; } c->qb_pos = (newline-c->querybuf)+2; if (ll <= 0) return C_OK; c->multibulklen = ll; /* Setup argv array on client structure */ if (c->argv) zfree(c->argv); c->argv = zmalloc(sizeof(robj*)*c->multibulklen); } serverAssertWithInfo(c,NULL,c->multibulklen > 0); while(c->multibulklen) { /* Read bulk length if unknown */ if (c->bulklen == -1) { newline = strchr(c->querybuf+c->qb_pos,'\r'); if (newline == NULL) { if (sdslen(c->querybuf)-c->qb_pos > PROTO_INLINE_MAX_SIZE) { addReplyError(c, "Protocol error: too big bulk count string"); setProtocolError("too big bulk count string",c); return C_ERR; } break; } /* Buffer should also contain \n */ if (newline-(c->querybuf+c->qb_pos) > (ssize_t)(sdslen(c->querybuf)-c->qb_pos-2)) break; if (c->querybuf[c->qb_pos] != '$') { addReplyErrorFormat(c, "Protocol error: expected '$', got '%c'", c->querybuf[c->qb_pos]); setProtocolError("expected $ but got something else",c); return C_ERR; } ok = string2ll(c->querybuf+c->qb_pos+1,newline-(c->querybuf+c->qb_pos+1),&ll); if (!ok || ll < 0 || ll > server.proto_max_bulk_len) { addReplyError(c,"Protocol error: invalid bulk length"); setProtocolError("invalid bulk length",c); return C_ERR; } c->qb_pos = newline-c->querybuf+2; if (ll >= PROTO_MBULK_BIG_ARG) { /* If we are going to read a large object from network * try to make it likely that it will start at c->querybuf * boundary so that we can optimize object creation * avoiding a large copy of data. * * But only when the data we have not parsed is less than * or equal to ll+2. If the data length is greater than * ll+2, trimming querybuf is just a waste of time, because * at this time the querybuf contains not only our bulk. */ if (sdslen(c->querybuf)-c->qb_pos <= (size_t)ll+2) { sdsrange(c->querybuf,c->qb_pos,-1); c->qb_pos = 0; /* Hint the sds library about the amount of bytes this string is * going to contain. */ c->querybuf = sdsMakeRoomFor(c->querybuf,ll+2); } } c->bulklen = ll; } /* Read bulk argument */ if (sdslen(c->querybuf)-c->qb_pos < (size_t)(c->bulklen+2)) { /* Not enough data (+2 == trailing \r\n) */ break; } else { /* Optimization: if the buffer contains JUST our bulk element * instead of creating a new object by *copying* the sds we * just use the current sds string. */ if (c->qb_pos == 0 && c->bulklen >= PROTO_MBULK_BIG_ARG && sdslen(c->querybuf) == (size_t)(c->bulklen+2)) { c->argv[c->argc++] = createObject(OBJ_STRING,c->querybuf); sdsIncrLen(c->querybuf,-2); /* remove CRLF */ /* Assume that if we saw a fat argument we'll see another one * likely... */ c->querybuf = sdsnewlen(SDS_NOINIT,c->bulklen+2); sdsclear(c->querybuf); } else { c->argv[c->argc++] = createStringObject(c->querybuf+c->qb_pos,c->bulklen); c->qb_pos += c->bulklen+2; } c->bulklen = -1; c->multibulklen--; } } /* We're done when c->multibulk == 0 */ if (c->multibulklen == 0) return C_OK; /* Still not ready to process the command */ return C_ERR; } /* This function is called every time, in the client structure 'c', there is * more query buffer to process, because we read more data from the socket * or because a client was blocked and later reactivated, so there could be * pending query buffer, already representing a full command, to process. */ void processInputBuffer(client *c) { server.current_client = c; /* Keep processing while there is something in the input buffer */ while(c->qb_pos < sdslen(c->querybuf)) { /* Return if clients are paused. */ if (!(c->flags & CLIENT_SLAVE) && clientsArePaused()) break; /* Immediately abort if the client is in the middle of something. */ if (c->flags & CLIENT_BLOCKED) break; /* Don't process input from the master while there is a busy script * condition on the slave. We want just to accumulate the replication * stream (instead of replying -BUSY like we do with other clients) and * later resume the processing. */ if (server.lua_timedout && c->flags & CLIENT_MASTER) break; /* CLIENT_CLOSE_AFTER_REPLY closes the connection once the reply is * written to the client. Make sure to not let the reply grow after * this flag has been set (i.e. don't process more commands). * * The same applies for clients we want to terminate ASAP. */ if (c->flags & (CLIENT_CLOSE_AFTER_REPLY|CLIENT_CLOSE_ASAP)) break; /* Determine request type when unknown. */ if (!c->reqtype) { if (c->querybuf[c->qb_pos] == '*') { c->reqtype = PROTO_REQ_MULTIBULK; } else { c->reqtype = PROTO_REQ_INLINE; } } if (c->reqtype == PROTO_REQ_INLINE) { if (processInlineBuffer(c) != C_OK) break; } else if (c->reqtype == PROTO_REQ_MULTIBULK) { if (processMultibulkBuffer(c) != C_OK) break; } else { serverPanic("Unknown request type"); } /* Multibulk processing could see a <= 0 length. */ if (c->argc == 0) { resetClient(c); } else { /* Only reset the client when the command was executed. */ if (processCommand(c) == C_OK) { if (c->flags & CLIENT_MASTER && !(c->flags & CLIENT_MULTI)) { /* Update the applied replication offset of our master. */ c->reploff = c->read_reploff - sdslen(c->querybuf) + c->qb_pos; } /* Don't reset the client structure for clients blocked in a * module blocking command, so that the reply callback will * still be able to access the client argv and argc field. * The client will be reset in unblockClientFromModule(). */ if (!(c->flags & CLIENT_BLOCKED) || c->btype != BLOCKED_MODULE) resetClient(c); } /* freeMemoryIfNeeded may flush slave output buffers. This may * result into a slave, that may be the active client, to be * freed. */ if (server.current_client == NULL) break; } } /* Trim to pos */ if (c->qb_pos) { sdsrange(c->querybuf,c->qb_pos,-1); c->qb_pos = 0; } server.current_client = NULL; } /* This is a wrapper for processInputBuffer that also cares about handling * the replication forwarding to the sub-slaves, in case the client 'c' * is flagged as master. Usually you want to call this instead of the * raw processInputBuffer(). */ void processInputBufferAndReplicate(client *c) { if (!(c->flags & CLIENT_MASTER)) { processInputBuffer(c); } else { size_t prev_offset = c->reploff; processInputBuffer(c); size_t applied = c->reploff - prev_offset; if (applied) { replicationFeedSlavesFromMasterStream(server.slaves, c->pending_querybuf, applied); sdsrange(c->pending_querybuf,applied,-1); } } } void readQueryFromClient(aeEventLoop *el, int fd, void *privdata, int mask) { client *c = (client*) privdata; int nread, readlen; size_t qblen; UNUSED(el); UNUSED(mask); readlen = PROTO_IOBUF_LEN; /* If this is a multi bulk request, and we are processing a bulk reply * that is large enough, try to maximize the probability that the query * buffer contains exactly the SDS string representing the object, even * at the risk of requiring more read(2) calls. This way the function * processMultiBulkBuffer() can avoid copying buffers to create the * Redis Object representing the argument. */ if (c->reqtype == PROTO_REQ_MULTIBULK && c->multibulklen && c->bulklen != -1 && c->bulklen >= PROTO_MBULK_BIG_ARG) { ssize_t remaining = (size_t)(c->bulklen+2)-sdslen(c->querybuf); /* Note that the 'remaining' variable may be zero in some edge case, * for example once we resume a blocked client after CLIENT PAUSE. */ if (remaining > 0 && remaining < readlen) readlen = remaining; } qblen = sdslen(c->querybuf); if (c->querybuf_peak < qblen) c->querybuf_peak = qblen; c->querybuf = sdsMakeRoomFor(c->querybuf, readlen); nread = read(fd, c->querybuf+qblen, readlen); if (nread == -1) { if (errno == EAGAIN) { return; } else { serverLog(LL_VERBOSE, "Reading from client: %s",strerror(errno)); freeClient(c); return; } } else if (nread == 0) { serverLog(LL_VERBOSE, "Client closed connection"); freeClient(c); return; } else if (c->flags & CLIENT_MASTER) { /* Append the query buffer to the pending (not applied) buffer * of the master. We'll use this buffer later in order to have a * copy of the string applied by the last command executed. */ c->pending_querybuf = sdscatlen(c->pending_querybuf, c->querybuf+qblen,nread); } sdsIncrLen(c->querybuf,nread); c->lastinteraction = server.unixtime; if (c->flags & CLIENT_MASTER) c->read_reploff += nread; server.stat_net_input_bytes += nread; if (sdslen(c->querybuf) > server.client_max_querybuf_len) { sds ci = catClientInfoString(sdsempty(),c), bytes = sdsempty(); bytes = sdscatrepr(bytes,c->querybuf,64); serverLog(LL_WARNING,"Closing client that reached max query buffer length: %s (qbuf initial bytes: %s)", ci, bytes); sdsfree(ci); sdsfree(bytes); freeClient(c); return; } /* Time to process the buffer. If the client is a master we need to * compute the difference between the applied offset before and after * processing the buffer, to understand how much of the replication stream * was actually applied to the master state: this quantity, and its * corresponding part of the replication stream, will be propagated to * the sub-slaves and to the replication backlog. */ processInputBufferAndReplicate(c); } void getClientsMaxBuffers(unsigned long *longest_output_list, unsigned long *biggest_input_buffer) { client *c; listNode *ln; listIter li; unsigned long lol = 0, bib = 0; listRewind(server.clients,&li); while ((ln = listNext(&li)) != NULL) { c = listNodeValue(ln); if (listLength(c->reply) > lol) lol = listLength(c->reply); if (sdslen(c->querybuf) > bib) bib = sdslen(c->querybuf); } *longest_output_list = lol; *biggest_input_buffer = bib; } /* A Redis "Peer ID" is a colon separated ip:port pair. * For IPv4 it's in the form x.y.z.k:port, example: "127.0.0.1:1234". * For IPv6 addresses we use [] around the IP part, like in "[::1]:1234". * For Unix sockets we use path:0, like in "/tmp/redis:0". * * A Peer ID always fits inside a buffer of NET_PEER_ID_LEN bytes, including * the null term. * * On failure the function still populates 'peerid' with the "?:0" string * in case you want to relax error checking or need to display something * anyway (see anetPeerToString implementation for more info). */ void genClientPeerId(client *client, char *peerid, size_t peerid_len) { if (client->flags & CLIENT_UNIX_SOCKET) { /* Unix socket client. */ snprintf(peerid,peerid_len,"%s:0",server.unixsocket); } else { /* TCP client. */ anetFormatPeer(client->fd,peerid,peerid_len); } } /* This function returns the client peer id, by creating and caching it * if client->peerid is NULL, otherwise returning the cached value. * The Peer ID never changes during the life of the client, however it * is expensive to compute. */ char *getClientPeerId(client *c) { char peerid[NET_PEER_ID_LEN]; if (c->peerid == NULL) { genClientPeerId(c,peerid,sizeof(peerid)); c->peerid = sdsnew(peerid); } return c->peerid; } /* Concatenate a string representing the state of a client in an human * readable format, into the sds string 's'. */ sds catClientInfoString(sds s, client *client) { char flags[16], events[3], *p; int emask; p = flags; if (client->flags & CLIENT_SLAVE) { if (client->flags & CLIENT_MONITOR) *p++ = 'O'; else *p++ = 'S'; } if (client->flags & CLIENT_MASTER) *p++ = 'M'; if (client->flags & CLIENT_PUBSUB) *p++ = 'P'; if (client->flags & CLIENT_MULTI) *p++ = 'x'; if (client->flags & CLIENT_BLOCKED) *p++ = 'b'; if (client->flags & CLIENT_DIRTY_CAS) *p++ = 'd'; if (client->flags & CLIENT_CLOSE_AFTER_REPLY) *p++ = 'c'; if (client->flags & CLIENT_UNBLOCKED) *p++ = 'u'; if (client->flags & CLIENT_CLOSE_ASAP) *p++ = 'A'; if (client->flags & CLIENT_UNIX_SOCKET) *p++ = 'U'; if (client->flags & CLIENT_READONLY) *p++ = 'r'; if (p == flags) *p++ = 'N'; *p++ = '\0'; emask = client->fd == -1 ? 0 : aeGetFileEvents(server.el,client->fd); p = events; if (emask & AE_READABLE) *p++ = 'r'; if (emask & AE_WRITABLE) *p++ = 'w'; *p = '\0'; return sdscatfmt(s, "id=%U addr=%s fd=%i name=%s age=%I idle=%I flags=%s db=%i sub=%i psub=%i multi=%i qbuf=%U qbuf-free=%U obl=%U oll=%U omem=%U events=%s cmd=%s", (unsigned long long) client->id, getClientPeerId(client), client->fd, client->name ? (char*)client->name->ptr : "", (long long)(server.unixtime - client->ctime), (long long)(server.unixtime - client->lastinteraction), flags, client->db->id, (int) dictSize(client->pubsub_channels), (int) listLength(client->pubsub_patterns), (client->flags & CLIENT_MULTI) ? client->mstate.count : -1, (unsigned long long) sdslen(client->querybuf), (unsigned long long) sdsavail(client->querybuf), (unsigned long long) client->bufpos, (unsigned long long) listLength(client->reply), (unsigned long long) getClientOutputBufferMemoryUsage(client), events, client->lastcmd ? client->lastcmd->name : "NULL"); } sds getAllClientsInfoString(int type) { listNode *ln; listIter li; client *client; sds o = sdsnewlen(SDS_NOINIT,200*listLength(server.clients)); sdsclear(o); listRewind(server.clients,&li); while ((ln = listNext(&li)) != NULL) { client = listNodeValue(ln); if (type != -1 && getClientType(client) != type) continue; o = catClientInfoString(o,client); o = sdscatlen(o,"\n",1); } return o; } void clientCommand(client *c) { listNode *ln; listIter li; client *client; if (c->argc == 2 && !strcasecmp(c->argv[1]->ptr,"help")) { const char *help[] = { "id -- Return the ID of the current connection.", "getname -- Return the name of the current connection.", "kill -- Kill connection made from .", "kill