#
# Author:: AJ Christensen (<aj@chef.io>)
# Author:: Mark Mzyk (mmzyk@chef.io)
# Copyright:: Copyright (c) Chef Software Inc.
# License:: Apache License, Version 2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require "pp" unless defined?(PP)
require "socket" unless defined?(Socket)
require_relative "config"
require_relative "exceptions"
require_relative "local_mode"
require_relative "log"
require_relative "platform"
require "mixlib/cli" unless defined?(Mixlib::CLI)
require "tmpdir" unless defined?(Dir.mktmpdir)
require "rbconfig" unless defined?(RbConfig)
require_relative "application/exit_code"
require "chef-utils" unless defined?(ChefUtils::CANARY)
module LicenseAcceptance
  autoload :Acceptor, "license_acceptance/acceptor"
end

class Chef
  class Application
    include Mixlib::CLI

    def initialize
      super

      @chef_client = nil
      @chef_client_json = nil
    end

    # Configure mixlib-cli to always separate defaults from user-supplied CLI options
    def self.use_separate_defaults?
      true
    end

    # Reconfigure the application. You'll want to override and super this method.
    def reconfigure
      # In case any gems were installed for use in the config.
      Gem.clear_paths
      configure_chef
      configure_logging
      configure_encoding
      emit_warnings
    end

    # Get this party started
    def run(enforce_license: false)
      setup_signal_handlers
      reconfigure
      setup_application
      check_license_acceptance if enforce_license
      run_application
    end

    def setup_signal_handlers
      trap("INT") do
        Chef::Application.fatal!("SIGINT received, stopping", Chef::Exceptions::SigInt.new)
      end

      trap("TERM") do
        Chef::Application.fatal!("SIGTERM received, stopping", Chef::Exceptions::SigTerm.new)
      end

      unless ChefUtils.windows?
        trap("QUIT") do
          logger.info("SIGQUIT received, call stack:\n  " + caller.join("\n  "))
        end

        trap("HUP") do
          logger.info("SIGHUP received, reconfiguring")
          reconfigure
        end
      end
    end

    def emit_warnings
      logger.warn "chef_config[:zypper_check_gpg] is set to false which disables security checking on zypper packages" unless chef_config[:zypper_check_gpg]
    end

    # Parse configuration (options and config file)
    def configure_chef
      parse_options
      begin
        load_config_file
      rescue Exception => e
        Chef::Application.fatal!(e.message, Chef::Exceptions::ConfigurationError.new)
      end
      chef_config.export_proxies
      chef_config.init_openssl
      File.umask chef_config[:umask]
    end

    # @api private (test injection)
    def chef_config
      Chef::Config
    end

    # @api private (test injection)
    def logger
      Chef::Log
    end

    def self.logger
      Chef::Log
    end

    # @api private (test injection)
    def chef_configfetcher
      require_relative "config_fetcher"
      Chef::ConfigFetcher
    end

    # Parse the config file
    def load_config_file
      # apply the default cli options first
      chef_config.merge!(default_config)

      config_fetcher = chef_configfetcher.new(config[:config_file])
      # Some config settings are derived relative to the config file path; if
      # given as a relative path, this is computed relative to cwd, but
      # chef-client will later chdir to root, so we need to get the absolute path
      # here.
      config[:config_file] = config_fetcher.expanded_path

      if config[:config_file].nil?
        logger.warn("No config file found or specified on command line. Using command line options instead.")
      elsif config_fetcher.config_missing?
        logger.warn("*****************************************")
        logger.warn("Did not find config file: #{config[:config_file]}. Using command line options instead.")
        logger.warn("*****************************************")
      else
        config_content = config_fetcher.read_config
        apply_config(config_content, config[:config_file])
      end
      extra_config_options = config.delete(:config_option)
      chef_config.merge!(config)
      apply_extra_config_options(extra_config_options)
    end

    def apply_extra_config_options(extra_config_options)
      chef_config.apply_extra_config_options(extra_config_options)
    end

    # Set the specific recipes to Chef::Config if the recipes are valid
    # otherwise log a fatal error message and exit the application.
    def set_specific_recipes
      if cli_arguments.is_a?(Array) &&
          (cli_arguments.empty? || cli_arguments.all? { |file| File.file?(file) } )
        chef_config[:specific_recipes] =
          cli_arguments.map { |file| File.expand_path(file) }
      else
        Chef::Application.fatal!("Invalid argument; could not find the following recipe files: \"" +
          cli_arguments.select { |file| !File.file?(file) }.join('", "') + '"')
      end
    end

    def configure_logging
      configure_log_location
      logger.init(MonoLogger.new(chef_config[:log_location][0]))
      chef_config[:log_location][1..].each do |log_location|
        logger.loggers << MonoLogger.new(log_location)
      end
      logger.level = resolve_log_level
    rescue StandardError => error
      logger.fatal("Failed to open or create log file at #{chef_config[:log_location]}: #{error.class} (#{error.message})")
      Chef::Application.fatal!("Aborting due to invalid 'log_location' configuration", error)
    end

    # merge Chef::Config[:log_location] and config[:log_location_cli]
    #   - the nil default value of log_location_cli means STDOUT
    #   - the nil default value of log_location is removed
    #   - Arrays are supported
    #   - syslog + winevt are converted to those specific logger objects
    #
    def configure_log_location
      log_location_cli = [ config[:log_location_cli] ].flatten.map { |log_location| log_location.nil? ? STDOUT : log_location }

      chef_config[:log_location] = [ chef_config[:log_location], log_location_cli ].flatten.compact.uniq

      chef_config[:log_location].map! do |log_location|
        case log_location
        when :syslog, "syslog"
          force_force_logger
          logger::Syslog.new
        when :win_evt, "win_evt"
          force_force_logger
          logger::WinEvt.new
        else
          # should be a path or STDOUT
          log_location
        end
      end
    end

    # Force the logger by default for the :winevt and :syslog loggers.  Since we do not and cannot
    # support multiple log levels in a mix-and-match situation with formatters and loggers, and the
    # formatters do not support syslog, we force the formatter off by default and the log level is
    # thus info by default.  Users can add `--force-formatter -l info` to get back formatter output
    # on STDOUT along with syslog logging.
    #
    def force_force_logger
      chef_config[:force_logger] = true unless chef_config[:force_formatter]
    end

    # Use of output formatters is assumed if `force_formatter` is set or if `force_logger` is not set
    def using_output_formatter?
      chef_config[:force_formatter] || !chef_config[:force_logger]
    end

    # The :auto formatter defaults to :warn with the formatter and :info with the logger
    def resolve_log_level
      if chef_config[:log_level] == :auto
        using_output_formatter? ? :warn : :info
      else
        chef_config[:log_level]
      end
    end

    # Sets the default external encoding to UTF-8 (users can change this, but they shouldn't)
    def configure_encoding
      Encoding.default_external = chef_config[:ruby_encoding]
    end

    # Called prior to starting the application, by the run method
    def setup_application
      raise Chef::Exceptions::Application, "#{self}: you must override setup_application"
    end

    def check_license_acceptance
      LicenseAcceptance::Acceptor.check_and_persist!(
        "infra-client",
        Chef::VERSION.to_s,
        logger: logger,
        provided: Chef::Config[:chef_license]
      )
    end

    # Actually run the application
    def run_application
      raise Chef::Exceptions::Application, "#{self}: you must override run_application"
    end

    # Initializes Chef::Client instance and runs it
    def run_chef_client(specific_recipes = [])
      unless specific_recipes.respond_to?(:size)
        raise ArgumentError, "received non-Array like specific_recipes argument"
      end

      Chef::LocalMode.with_server_connectivity do
        override_runlist = config[:override_runlist]
        @chef_client = Chef::Client.new(
          @chef_client_json,
          override_runlist: override_runlist,
          specific_recipes: specific_recipes,
          runlist: config[:runlist],
          logger: logger
        )
        @chef_client_json = nil

        if can_fork?
          fork_chef_client # allowed to run client in forked process
        else
          # Unforked interval runs are disabled, so this runs chef-client
          # once and then exits. If TERM signal is received, will "ignore"
          # the signal to finish converge.
          run_with_graceful_exit_option
        end
        @chef_client = nil
      end
    end

    private

    def can_fork?
      # win32-process gem exposes some form of :fork for Process
      # class. So we are separately ensuring that the platform we're
      # running on is not windows before forking.
      chef_config[:client_fork] && Process.respond_to?(:fork) && !ChefUtils.windows?
    end

    # Run chef-client once and then exit. If TERM signal is received, ignores the
    # signal to finish the converge and exists.
    def run_with_graceful_exit_option
      # Override the TERM signal.
      trap("TERM") do
        logger.debug("SIGTERM received during converge," +
          " finishing converge to exit normally (send SIGINT to terminate immediately)")
      end

      @chef_client.run
      true
    end

    def fork_chef_client
      logger.info "Forking #{ChefUtils::Dist::Infra::PRODUCT} instance to converge..."
      pid = fork do
        # Want to allow forked processes to finish converging when
        # TERM singal is received (exit gracefully)
        trap("TERM") do
          logger.debug("SIGTERM received during converge," +
            " finishing converge to exit normally (send SIGINT to terminate immediately)")
        end

        client_solo = chef_config[:solo] ? ChefUtils::Dist::Solo::EXEC : ChefUtils::Dist::Infra::CLIENT
        $0 = "#{client_solo} worker: ppid=#{Process.ppid};start=#{Time.new.strftime("%R:%S")};"
        begin
          logger.trace "Forked instance now converging"
          @chef_client.run
        rescue Exception => e
          logger.error(e.to_s)
          exit Chef::Application.normalize_exit_code(e)
        else
          exit 0
        end
      end
      logger.trace "Fork successful. Waiting for new #{ChefUtils::Dist::Infra::CLIENT} pid: #{pid}"
      result = Process.waitpid2(pid)
      handle_child_exit(result)
      logger.trace "Forked instance successfully reaped (pid: #{pid})"
      true
    end

    def handle_child_exit(pid_and_status)
      status = pid_and_status[1]
      return true if status.success?

      message = if status.signaled?
                  "#{ChefUtils::Dist::Infra::PRODUCT} run process terminated by signal #{status.termsig} (#{Signal.list.invert[status.termsig]})"
                else
                  "#{ChefUtils::Dist::Infra::PRODUCT} run process exited unsuccessfully (exit code #{status.exitstatus})"
                end
      raise Exceptions::ChildConvergeError, message
    end

    def apply_config(config_content, config_file_path)
      chef_config.from_string(config_content, config_file_path)
    rescue Exception => error
      logger.fatal("Configuration error #{error.class}: #{error.message}")
      filtered_trace = error.backtrace.grep(/#{Regexp.escape(config_file_path)}/)
      filtered_trace.each { |line| logger.fatal("  " + line ) }
      raise Chef::Exceptions::ConfigurationError.new("Aborting due to error in '#{config_file_path}': #{error}")
      # Chef::Application.fatal!("Aborting due to error in '#{config_file_path}'", Chef::Exceptions::ConfigurationError.new(error))
    end

    # This is a hook for testing
    def env
      ENV
    end

    class << self
      def debug_stacktrace(e)
        message = "#{e.class}: #{e}\n#{e.backtrace.join("\n")}"

        cause = e.cause if e.respond_to?(:cause)
        until cause.nil?
          message << "\n\n>>>> Caused by #{cause.class}: #{cause}\n#{cause.backtrace.join("\n")}"
          cause = cause.respond_to?(:cause) ? cause.cause : nil
        end

        chef_stacktrace_out = "Generated at #{Time.now}\n"
        chef_stacktrace_out += message

        Chef::FileCache.store("#{ChefUtils::Dist::Infra::SHORT}-stacktrace.out", chef_stacktrace_out)
        logger.fatal("Stacktrace dumped to #{Chef::FileCache.load("#{ChefUtils::Dist::Infra::SHORT}-stacktrace.out", false)}")
        logger.fatal("Please provide the contents of the stacktrace.out file if you file a bug report")
        if Chef::Config[:always_dump_stacktrace]
          logger.fatal(message)
        else
          logger.debug(message)
        end
        true
      end

      def normalize_exit_code(exit_code)
        Chef::Application::ExitCode.normalize_exit_code(exit_code)
      end

      # Log a fatal error message to both STDERR and the Logger, exit the application
      def fatal!(msg, err = nil)
        if Chef::Config[:always_dump_stacktrace]
          msg << "\n#{err.backtrace.join("\n")}"
        end
        logger.fatal(msg)
        Process.exit(normalize_exit_code(err))
      end

      def exit!(msg, err = nil)
        logger.debug(msg)
        Process.exit(normalize_exit_code(err))
      end
    end

  end
end