# -*- ruby encoding: utf-8 -*-

module Diff
  # = Diff::LCS 1.1.3
  # Computes "intelligent" differences between two sequenced Enumerables.
  # This is an implementation of the McIlroy-Hunt "diff" algorithm for
  # Enumerable objects that include Diffable.
  #
  # Based on Mario I. Wolczko's Smalltalk version (1.2, 1993) and Ned Konz's
  # Perl version (Algorithm::Diff 1.15).
  #
  # == Synopsis
  #   require 'diff/lcs'
  #
  #   seq1 = %w(a b c e h j l m n p)
  #   seq2 = %w(b c d e f j k l m r s t)
  #
  #   lcs = Diff::LCS.LCS(seq1, seq2)
  #   diffs = Diff::LCS.diff(seq1, seq2)
  #   sdiff = Diff::LCS.sdiff(seq1, seq2)
  #   seq = Diff::LCS.traverse_sequences(seq1, seq2, callback_obj)
  #   bal = Diff::LCS.traverse_balanced(seq1, seq2, callback_obj)
  #   seq2 == Diff::LCS.patch(seq1, diffs)
  #   seq2 == Diff::LCS.patch!(seq1, diffs)
  #   seq1 == Diff::LCS.unpatch(seq2, diffs)
  #   seq1 == Diff::LCS.unpatch!(seq2, diffs)
  #   seq2 == Diff::LCS.patch(seq1, sdiff)
  #   seq2 == Diff::LCS.patch!(seq1, sdiff)
  #   seq1 == Diff::LCS.unpatch(seq2, sdiff)
  #   seq1 == Diff::LCS.unpatch!(seq2, sdiff)
  #
  # Alternatively, objects can be extended with Diff::LCS:
  #
  #   seq1.extend(Diff::LCS)
  #   lcs = seq1.lcs(seq2)
  #   diffs = seq1.diff(seq2)
  #   sdiff = seq1.sdiff(seq2)
  #   seq = seq1.traverse_sequences(seq2, callback_obj)
  #   bal = seq1.traverse_balanced(seq2, callback_obj)
  #   seq2 == seq1.patch(diffs)
  #   seq2 == seq1.patch!(diffs)
  #   seq1 == seq2.unpatch(diffs)
  #   seq1 == seq2.unpatch!(diffs)
  #   seq2 == seq1.patch(sdiff)
  #   seq2 == seq1.patch!(sdiff)
  #   seq1 == seq2.unpatch(sdiff)
  #   seq1 == seq2.unpatch!(sdiff)
  #
  # Default extensions are provided for Array and String objects through the
  # use of 'diff/lcs/array' and 'diff/lcs/string'.
  #
  # == Introduction (by Mark-Jason Dominus)
  #
  # <em>The following text is from the Perl documentation. The only changes
  # have been to make the text appear better in Rdoc</em>.
  #
  # I once read an article written by the authors of +diff+; they said that
  # they hard worked very hard on the algorithm until they found the right
  # one.
  #
  # I think what they ended up using (and I hope someone will correct me,
  # because I am not very confident about this) was the `longest common
  # subsequence' method. In the LCS problem, you have two sequences of
  # items:
  #
  #    a b c d f g h j q z
  #    a b c d e f g i j k r x y z
  #
  # and you want to find the longest sequence of items that is present in
  # both original sequences in the same order. That is, you want to find a
  # new sequence *S* which can be obtained from the first sequence by
  # deleting some items, and from the second sequence by deleting other
  # items. You also want *S* to be as long as possible. In this case *S* is:
  #
  #    a b c d f g j z
  #
  # From there it's only a small step to get diff-like output:
  #
  #    e   h i   k   q r x y
  #    +   - +   +   - + + +
  #
  # This module solves the LCS problem. It also includes a canned function
  # to generate +diff+-like output.
  #
  # It might seem from the example above that the LCS of two sequences is
  # always pretty obvious, but that's not always the case, especially when
  # the two sequences have many repeated elements. For example, consider
  #
  #    a x b y c z p d q
  #    a b c a x b y c z
  #
  # A naive approach might start by matching up the +a+ and +b+ that appear
  # at the beginning of each sequence, like this:
  #
  #    a x b y c         z p d q
  #    a   b   c a b y c z
  #
  # This finds the common subsequence +a b c z+. But actually, the LCS is
  # +a x b y c z+:
  #
  #          a x b y c z p d q
  #    a b c a x b y c z
  #
  # == Author
  # This version is by Austin Ziegler <austin@rubyforge.org>.
  #
  # It is based on the Perl Algorithm::Diff (1.15) by Ned Konz , copyright
  # &copy; 2000&ndash;2002 and the Smalltalk diff version by Mario I.
  # Wolczko, copyright &copy; 1993. Documentation includes work by
  # Mark-Jason Dominus.
  #
  # == Licence
  # Copyright &copy; 2004 Austin Ziegler
  # This program is free software; you can redistribute it and/or modify it
  # under the same terms as Ruby, or alternatively under the Perl Artistic
  # licence.
  #
  # == Credits
  # Much of the documentation is taken directly from the Perl
  # Algorithm::Diff implementation and was written originally by Mark-Jason
  # Dominus and later by Ned Konz. The basic Ruby implementation was
  # re-ported from the Smalltalk implementation, available at
  # ftp://st.cs.uiuc.edu/pub/Smalltalk/MANCHESTER/manchester/4.0/diff.st
  #
  # #sdiff and #traverse_balanced were written for the Perl version by Mike
  # Schilli <m@perlmeister.com>.
  #
  # "The algorithm is described in <em>A Fast Algorithm for Computing
  # Longest Common Subsequences</em>, CACM, vol.20, no.5, pp.350-353, May
  # 1977, with a few minor improvements to improve the speed."
  module LCS
    VERSION = '1.1.3'
  end
end

require 'diff/lcs/callbacks'
require 'diff/lcs/internals'

module Diff::LCS
  # Returns an Array containing the longest common subsequence(s) between
  # +self+ and +other+. See Diff::LCS#LCS.
  #
  #   lcs = seq1.lcs(seq2)
  def lcs(other, &block) #:yields self[ii] if there are matched subsequences:
    Diff::LCS.LCS(self, other, &block)
  end

  # Returns the difference set between +self+ and +other+. See
  # Diff::LCS#diff.
  def diff(other, callbacks = nil, &block)
    Diff::LCS.diff(self, other, callbacks, &block)
  end

  # Returns the balanced ("side-by-side") difference set between +self+ and
  # +other+. See Diff::LCS#sdiff.
  def sdiff(other, callbacks = nil, &block)
    Diff::LCS.sdiff(self, other, callbacks, &block)
  end

  # Traverses the discovered longest common subsequences between +self+ and
  # +other+. See Diff::LCS#traverse_sequences.
  def traverse_sequences(other, callbacks = nil, &block)
    traverse_sequences(self, other, callbacks ||
                       Diff::LCS.YieldingCallbacks, &block)
  end

  # Traverses the discovered longest common subsequences between +self+ and
  # +other+ using the alternate, balanced algorithm. See
  # Diff::LCS#traverse_balanced.
  def traverse_balanced(other, callbacks = nil, &block)
    traverse_balanced(self, other, callbacks ||
                      Diff::LCS.YieldingCallbacks, &block)
  end

  # Attempts to patch a copy of +self+ with the provided +patchset+. See
  # Diff::LCS#patch.
  def patch(patchset)
    Diff::LCS.patch(self.dup, patchset)
  end

  # Attempts to unpatch a copy of +self+ with the provided +patchset+. See
  # Diff::LCS#patch.
  def unpatch(patchset)
    Diff::LCS.unpatch(self.dup, patchset)
  end

  # Attempts to patch +self+ with the provided +patchset+. See
  # Diff::LCS#patch!. Does no autodiscovery.
  def patch!(patchset)
    Diff::LCS.patch!(self, patchset)
  end

  # Attempts to unpatch +self+ with the provided +patchset+. See
  # Diff::LCS#unpatch. Does no autodiscovery.
  def unpatch!(patchset)
    Diff::LCS.unpatch!(self, patchset)
  end
end

module Diff::LCS
  class << self
    # Given two sequenced Enumerables, LCS returns an Array containing their
    # longest common subsequences.
    #
    #   lcs = Diff::LCS.LCS(seq1, seq2)
    #
    # This array whose contents is such that:
    #
    #   lcs.each_with_index do |ee, ii|
    #     assert(ee.nil? || (seq1[ii] == seq2[ee]))
    #   end
    #
    # If a block is provided, the matching subsequences will be yielded from
    # +seq1+ in turn and may be modified before they are placed into the
    # returned Array of subsequences.
    def LCS(seq1, seq2, &block) #:yields seq1[ii] for each matched:
      matches = Diff::LCS::Internals.lcs(seq1, seq2)
      ret = []
      matches.each_with_index do |ee, ii|
        unless matches[ii].nil?
          if block_given?
            ret << (yield seq1[ii])
          else
            ret << seq1[ii]
          end
        end
      end
      ret
    end

    # Diff::LCS.diff computes the smallest set of additions and deletions
    # necessary to turn the first sequence into the second, and returns a
    # description of these changes.
    #
    # See Diff::LCS::DiffCallbacks for the default behaviour. An alternate
    # behaviour may be implemented with Diff::LCS::ContextDiffCallbacks. If
    # a Class argument is provided for +callbacks+, #diff will attempt to
    # initialise it. If the +callbacks+ object (possibly initialised)
    # responds to #finish, it will be called.
    def diff(seq1, seq2, callbacks = nil, &block) # :yields diff changes:
      callbacks ||= Diff::LCS::DiffCallbacks
      if callbacks.kind_of?(Class)
        cb = callbacks.new rescue callbacks
        callbacks = cb
      end
      traverse_sequences(seq1, seq2, callbacks)
      callbacks.finish if callbacks.respond_to?(:finish)

      if block_given?
        res = callbacks.diffs.map do |hunk|
          if hunk.kind_of?(Array)
            hunk = hunk.map { |hunk_block| yield hunk_block }
          else
            yield hunk
          end
        end
        res
      else
        callbacks.diffs
      end
    end

    # Diff::LCS.sdiff computes all necessary components to show two sequences
    # and their minimized differences side by side, just like the Unix
    # utility <em>sdiff</em> does:
    #
    #     old        <     -
    #     same             same
    #     before     |     after
    #     -          >     new
    #
    # See Diff::LCS::SDiffCallbacks for the default behaviour. An alternate
    # behaviour may be implemented with Diff::LCS::ContextDiffCallbacks. If
    # a Class argument is provided for +callbacks+, #diff will attempt to
    # initialise it. If the +callbacks+ object (possibly initialised)
    # responds to #finish, it will be called.
    def sdiff(seq1, seq2, callbacks = nil, &block) #:yields diff changes:
      callbacks ||= Diff::LCS::SDiffCallbacks
      if callbacks.kind_of?(Class)
        cb = callbacks.new rescue callbacks
        callbacks = cb
      end
      traverse_balanced(seq1, seq2, callbacks)
      callbacks.finish if callbacks.respond_to?(:finish)

      if block_given?
        res = callbacks.diffs.map do |hunk|
          if hunk.kind_of?(Array)
            hunk = hunk.map { |hunk_block| yield hunk_block }
          else
            yield hunk
          end
        end
        res
      else
        callbacks.diffs
      end
    end

    # Diff::LCS.traverse_sequences is the most general facility provided by this
    # module; +diff+ and +LCS+ are implemented as calls to it.
    #
    # The arguments to #traverse_sequences are the two sequences to
    # traverse, and a callback object, like this:
    #
    #   traverse_sequences(seq1, seq2, Diff::LCS::ContextDiffCallbacks.new)
    #
    # #diff is implemented with #traverse_sequences.
    #
    # == Callback Methods
    # Optional callback methods are <em>emphasized</em>.
    #
    # callbacks#match::               Called when +a+ and +b+ are pointing
    #                                 to common elements in +A+ and +B+.
    # callbacks#discard_a::           Called when +a+ is pointing to an
    #                                 element not in +B+.
    # callbacks#discard_b::           Called when +b+ is pointing to an
    #                                 element not in +A+.
    # <em>callbacks#finished_a</em>:: Called when +a+ has reached the end of
    #                                 sequence +A+.
    # <em>callbacks#finished_b</em>:: Called when +b+ has reached the end of
    #                                 sequence +B+.
    #
    # == Algorithm
    #       a---+
    #           v
    #       A = a b c e h j l m n p
    #       B = b c d e f j k l m r s t
    #           ^
    #       b---+
    #
    # If there are two arrows (+a+ and +b+) pointing to elements of
    # sequences +A+ and +B+, the arrows will initially point to the first
    # elements of their respective sequences. #traverse_sequences will
    # advance the arrows through the sequences one element at a time,
    # calling a method on the user-specified callback object before each
    # advance. It will advance the arrows in such a way that if there are
    # elements <tt>A[ii]</tt> and <tt>B[jj]</tt> which are both equal and
    # part of the longest common subsequence, there will be some moment
    # during the execution of #traverse_sequences when arrow +a+ is pointing
    # to <tt>A[ii]</tt> and arrow +b+ is pointing to <tt>B[jj]</tt>. When
    # this happens, #traverse_sequences will call <tt>callbacks#match</tt>
    # and then it will advance both arrows.
    #
    # Otherwise, one of the arrows is pointing to an element of its sequence
    # that is not part of the longest common subsequence.
    # #traverse_sequences will advance that arrow and will call
    # <tt>callbacks#discard_a</tt> or <tt>callbacks#discard_b</tt>, depending
    # on which arrow it advanced. If both arrows point to elements that are
    # not part of the longest common subsequence, then #traverse_sequences
    # will advance one of them and call the appropriate callback, but it is
    # not specified which it will call.
    #
    # The methods for <tt>callbacks#match</tt>, <tt>callbacks#discard_a</tt>,
    # and <tt>callbacks#discard_b</tt> are invoked with an event comprising
    # the action ("=", "+", or "-", respectively), the indicies +ii+ and
    # +jj+, and the elements <tt>A[ii]</tt> and <tt>B[jj]</tt>. Return
    # values are discarded by #traverse_sequences.
    #
    # === End of Sequences
    # If arrow +a+ reaches the end of its sequence before arrow +b+ does,
    # #traverse_sequence will try to call <tt>callbacks#finished_a</tt> with
    # the last index and element of +A+ (<tt>A[-1]</tt>) and the current
    # index and element of +B+ (<tt>B[jj]</tt>). If
    # <tt>callbacks#finished_a</tt> does not exist, then
    # <tt>callbacks#discard_b</tt> will be called on each element of +B+
    # until the end of the sequence is reached (the call
    # will be done with <tt>A[-1]</tt> and <tt>B[jj]</tt> for each element).
    #
    # If +b+ reaches the end of +B+ before +a+ reaches the end of +A+,
    # <tt>callbacks#finished_b</tt> will be called with the current index
    # and element of +A+ (<tt>A[ii]</tt>) and the last index and element of
    # +B+ (<tt>A[-1]</tt>). Again, if <tt>callbacks#finished_b</tt> does not
    # exist on the callback object, then <tt>callbacks#discard_a</tt> will
    # be called on each element of +A+ until the end of the sequence is
    # reached (<tt>A[ii]</tt> and <tt>B[-1]</tt>).
    #
    # There is a chance that one additional <tt>callbacks#discard_a</tt> or
    # <tt>callbacks#discard_b</tt> will be called after the end of the
    # sequence is reached, if +a+ has not yet reached the end of +A+ or +b+
    # has not yet reached the end of +B+.
    def traverse_sequences(seq1, seq2, callbacks = Diff::LCS::SequenceCallbacks, &block) #:yields change events:
      matches = Diff::LCS::Internals.lcs(seq1, seq2)

      run_finished_a = run_finished_b = false
      string = seq1.kind_of?(String)

      a_size = seq1.size
      b_size = seq2.size
      ai = bj = 0

      (0 .. matches.size).each do |ii|
        b_line = matches[ii]

        ax = string ? seq1[ii, 1] : seq1[ii]
        bx = string ? seq2[bj, 1] : seq2[bj]

        if b_line.nil?
          unless ax.nil? or (string and ax.empty?)
            event = Diff::LCS::ContextChange.new('-', ii, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_a(event)
          end
        else
          loop do
            break unless bj < b_line
            bx = string ? seq2[bj, 1] : seq2[bj]
            event = Diff::LCS::ContextChange.new('+', ii, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_b(event)
            bj += 1
          end
          bx = string ? seq2[bj, 1] : seq2[bj]
          event = Diff::LCS::ContextChange.new('=', ii, ax, bj, bx)
          event = yield event if block_given?
          callbacks.match(event)
          bj += 1
        end
        ai = ii
      end
      ai += 1

      # The last entry (if any) processed was a match. +ai+ and +bj+ point
      # just past the last matching lines in their sequences.
      while (ai < a_size) or (bj < b_size)
        # last A?
        if ai == a_size and bj < b_size
          if callbacks.respond_to?(:finished_a) and not run_finished_a
            ax = string ? seq1[-1, 1] : seq1[-1]
            bx = string ? seq2[bj, 1] : seq2[bj]
            event = Diff::LCS::ContextChange.new('>', (a_size - 1), ax, bj, bx)
            event = yield event if block_given?
            callbacks.finished_a(event)
            run_finished_a = true
          else
            ax = string ? seq1[ai, 1] : seq1[ai]
            loop do
              bx = string ? seq2[bj, 1] : seq2[bj]
              event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
              event = yield event if block_given?
              callbacks.discard_b(event)
              bj += 1
              break unless bj < b_size
            end
          end
        end

        # last B?
        if bj == b_size and ai < a_size
          if callbacks.respond_to?(:finished_b) and not run_finished_b
            ax = string ? seq1[ai, 1] : seq1[ai]
            bx = string ? seq2[-1, 1] : seq2[-1]
            event = Diff::LCS::ContextChange.new('<', ai, ax, (b_size - 1), bx)
            event = yield event if block_given?
            callbacks.finished_b(event)
            run_finished_b = true
          else
            bx = string ? seq2[bj, 1] : seq2[bj]
            loop do
              ax = string ? seq1[ai, 1] : seq1[ai]
              event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
              event = yield event if block_given?
              callbacks.discard_a(event)
              ai += 1
              break unless bj < b_size
            end
          end
        end

        if ai < a_size
          ax = string ? seq1[ai, 1] : seq1[ai]
          bx = string ? seq2[bj, 1] : seq2[bj]
          event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_a(event)
          ai += 1
        end

        if bj < b_size
          ax = string ? seq1[ai, 1] : seq1[ai]
          bx = string ? seq2[bj, 1] : seq2[bj]
          event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_b(event)
          bj += 1
        end
      end
    end

    # #traverse_balanced is an alternative to #traverse_sequences. It
    # uses a different algorithm to iterate through the entries in the
    # computed longest common subsequence. Instead of viewing the changes as
    # insertions or deletions from one of the sequences, #traverse_balanced
    # will report <em>changes</em> between the sequences. To represent a
    #
    # The arguments to #traverse_balanced are the two sequences to traverse
    # and a callback object, like this:
    #
    #   traverse_balanced(seq1, seq2, Diff::LCS::ContextDiffCallbacks.new)
    #
    # #sdiff is implemented with #traverse_balanced.
    #
    # == Callback Methods
    # Optional callback methods are <em>emphasized</em>.
    #
    # callbacks#match::               Called when +a+ and +b+ are pointing
    #                                 to common elements in +A+ and +B+.
    # callbacks#discard_a::           Called when +a+ is pointing to an
    #                                 element not in +B+.
    # callbacks#discard_b::           Called when +b+ is pointing to an
    #                                 element not in +A+.
    # <em>callbacks#change</em>::     Called when +a+ and +b+ are pointing
    #                                 to the same relative position, but
    #                                 <tt>A[a]</tt> and <tt>B[b]</tt> are
    #                                 not the same; a <em>change</em> has
    #                                 occurred.
    #
    # #traverse_balanced might be a bit slower than #traverse_sequences,
    # noticable only while processing huge amounts of data.
    #
    # The +sdiff+ function of this module is implemented as call to
    # #traverse_balanced.
    #
    # == Algorithm
    #       a---+
    #           v
    #       A = a b c e h j l m n p
    #       B = b c d e f j k l m r s t
    #           ^
    #       b---+
    #
    # === Matches
    # If there are two arrows (+a+ and +b+) pointing to elements of
    # sequences +A+ and +B+, the arrows will initially point to the first
    # elements of their respective sequences. #traverse_sequences will
    # advance the arrows through the sequences one element at a time,
    # calling a method on the user-specified callback object before each
    # advance. It will advance the arrows in such a way that if there are
    # elements <tt>A[ii]</tt> and <tt>B[jj]</tt> which are both equal and
    # part of the longest common subsequence, there will be some moment
    # during the execution of #traverse_sequences when arrow +a+ is pointing
    # to <tt>A[ii]</tt> and arrow +b+ is pointing to <tt>B[jj]</tt>. When
    # this happens, #traverse_sequences will call <tt>callbacks#match</tt>
    # and then it will advance both arrows.
    #
    # === Discards
    # Otherwise, one of the arrows is pointing to an element of its sequence
    # that is not part of the longest common subsequence.
    # #traverse_sequences will advance that arrow and will call
    # <tt>callbacks#discard_a</tt> or <tt>callbacks#discard_b</tt>,
    # depending on which arrow it advanced.
    #
    # === Changes
    # If both +a+ and +b+ point to elements that are not part of the longest
    # common subsequence, then #traverse_sequences will try to call
    # <tt>callbacks#change</tt> and advance both arrows. If
    # <tt>callbacks#change</tt> is not implemented, then
    # <tt>callbacks#discard_a</tt> and <tt>callbacks#discard_b</tt> will be
    # called in turn.
    #
    # The methods for <tt>callbacks#match</tt>, <tt>callbacks#discard_a</tt>,
    # <tt>callbacks#discard_b</tt>, and <tt>callbacks#change</tt> are
    # invoked with an event comprising the action ("=", "+", "-", or "!",
    # respectively), the indicies +ii+ and +jj+, and the elements
    # <tt>A[ii]</tt> and <tt>B[jj]</tt>. Return values are discarded by
    # #traverse_balanced.
    #
    # === Context
    # Note that +ii+ and +jj+ may not be the same index position, even if
    # +a+ and +b+ are considered to be pointing to matching or changed
    # elements.
    def traverse_balanced(seq1, seq2, callbacks = Diff::LCS::BalancedCallbacks)
      matches = Diff::LCS::Internals.lcs(seq1, seq2)
      a_size = seq1.size
      b_size = seq2.size
      ai = bj = mb = 0
      ma = -1
      string = seq1.kind_of?(String)

        # Process all the lines in the match vector.
      loop do
          # Find next match indices +ma+ and +mb+
        loop do
          ma += 1
          break unless ma < matches.size and matches[ma].nil?
        end

        break if ma >= matches.size # end of matches?
        mb = matches[ma]

          # Change(seq2)
        while (ai < ma) or (bj < mb)
          ax = string ? seq1[ai, 1] : seq1[ai]
          bx = string ? seq2[bj, 1] : seq2[bj]

          case [(ai < ma), (bj < mb)]
          when [true, true]
            if callbacks.respond_to?(:change)
              event = Diff::LCS::ContextChange.new('!', ai, ax, bj, bx)
              event = yield event if block_given?
              callbacks.change(event)
              ai += 1
              bj += 1
            else
              event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
              event = yield event if block_given?
              callbacks.discard_a(event)
              ai += 1
              ax = string ? seq1[ai, 1] : seq1[ai]
              event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
              event = yield event if block_given?
              callbacks.discard_b(event)
              bj += 1
            end
          when [true, false]
            event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_a(event)
            ai += 1
          when [false, true]
            event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_b(event)
            bj += 1
          end
        end

        # Match
        ax = string ? seq1[ai, 1] : seq1[ai]
        bx = string ? seq2[bj, 1] : seq2[bj]
        event = Diff::LCS::ContextChange.new('=', ai, ax, bj, bx)
        event = yield event if block_given?
        callbacks.match(event)
        ai += 1
        bj += 1
      end

      while (ai < a_size) or (bj < b_size)
        ax = string ? seq1[ai, 1] : seq1[ai]
        bx = string ? seq2[bj, 1] : seq2[bj]

        case [(ai < a_size), (bj < b_size)]
        when [true, true]
          if callbacks.respond_to?(:change)
            event = Diff::LCS::ContextChange.new('!', ai, ax, bj, bx)
            event = yield event if block_given?
            callbacks.change(event)
            ai += 1
            bj += 1
          else
            event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_a(event)
            ai += 1
            ax = string ? seq1[ai, 1] : seq1[ai]
            event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
            event = yield event if block_given?
            callbacks.discard_b(event)
            bj += 1
          end
        when [true, false]
          event = Diff::LCS::ContextChange.new('-', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_a(event)
          ai += 1
        when [false, true]
          event = Diff::LCS::ContextChange.new('+', ai, ax, bj, bx)
          event = yield event if block_given?
          callbacks.discard_b(event)
          bj += 1
        end
      end
    end

    PATCH_MAP = { #:nodoc:
      :patch => { '+' => '+', '-' => '-', '!' => '!', '=' => '=' },
      :unpatch => { '+' => '-', '-' => '+', '!' => '!', '=' => '=' }
    }

    # Applies a +patchset+ to the sequence +src+ according to the
    # +direction+ (<tt>:patch</tt> or <tt>:unpatch</tt>).
    #
    # If the +direction+ is not specified, Diff::LCS::patch will attempt to
    # discover the direction of the +patchset+.
    #
    # A +patchset+ can be considered to apply forward (<tt>:patch</tt>) if
    # the following expression is true:
    #
    #     patch(s1, diff(s1, s2)) -> s2
    #
    # A +patchset+ can be considered to apply backward (<tt>:unpatch</tt>)
    # if the following expression is true:
    #
    #     patch(s2, diff(s1, s2)) -> s1
    #
    # If the +patchset+ contains no changes, the +src+ value will be
    # returned as either <tt>src.dup</tt> or +src+. A +patchset+ can be
    # deemed as having no changes if the following predicate returns true:
    #
    #     patchset.empty? or
    #       patchset.flatten.all? { |change| change.unchanged? }
    #
    # === Patchsets
    # A +patchset+ is always an enumerable sequence of changes, hunks of
    # changes, or a mix of the two. A hunk of changes is an enumerable
    # sequence of changes:
    #
    #     [ # patchset
    #       # change
    #       [ # hunk
    #         # change
    #       ]
    #     ]
    #
    # The +patch+ method accepts <tt>patchset</tt>s that are enumerable
    # sequences containing either Diff::LCS::Change objects (or a subclass)
    # or the array representations of those objects. Prior to application,
    # array representations of Diff::LCS::Change objects will be reified.
    def patch(src, patchset, direction = nil)
      # Normalize the patchset.
      has_changes, patchset = Diff::LCS::Internals.analyze_patchset(patchset)

      if not has_changes
        return src.dup if src.respond_to? :dup
        return src
      end

      string = src.kind_of?(String)
      # Start with a new empty type of the source's class
      res = src.class.new

      direction ||= Diff::LCS.__diff_direction(src, patchset)

      ai = bj = 0

      patch_map = PATCH_MAP[direction]

      patchset.flatten.each do |change|
        # Both Change and ContextChange support #action
        action = patch_map[change.action]

        case change
        when Diff::LCS::ContextChange
          case direction
          when :patch
            el = change.new_element
            op = change.old_position
            np = change.new_position
          when :unpatch
            el = change.old_element
            op = change.new_position
            np = change.old_position
          end

          case action
          when '-' # Remove details from the old string
            while ai < op
              res << (string ? src[ai, 1] : src[ai])
              ai += 1
              bj += 1
            end
            ai += 1
          when '+'
            while bj < np
              res << (string ? src[ai, 1] : src[ai])
              ai += 1
              bj += 1
            end

          res << el
          bj += 1
          when '='
            # This only appears in sdiff output with the SDiff callback.
            # Therefore, we only need to worry about dealing with a single
            # element.
            res << el

            ai += 1
            bj += 1
          when '!'
            while ai < op
              res << (string ? src[ai, 1] : src[ai])
              ai += 1
              bj += 1
            end

          bj += 1
          ai += 1

          res << el
          end
        when Diff::LCS::Change
          case action
          when '-'
            while ai < change.position
              res << (string ? src[ai, 1] : src[ai])
              ai += 1
              bj += 1
            end
            ai += 1
          when '+'
            while bj < change.position
              res << (string ? src[ai, 1] : src[ai])
              ai += 1
              bj += 1
            end

            bj += 1

            res << change.element
          end
        end
      end

      while ai < src.size
        res << (string ? src[ai, 1] : src[ai])
        ai += 1
        bj += 1
      end

      res
    end

    # Given a set of patchset, convert the current version to the prior
    # version. Does no auto-discovery.
    def unpatch!(src, patchset)
      Diff::LCS.patch(src, patchset, :unpatch)
    end

    # Given a set of patchset, convert the current version to the next
    # version. Does no auto-discovery.
    def patch!(src, patchset)
      Diff::LCS.patch(src, patchset, :patch)
    end
  end
end

# vim: ft=ruby