== json - JSON Implementation for Ruby === Description This is a implementation of the JSON specification according to RFC 4627 (http://www.ietf.org/rfc/rfc4627.txt). Starting from version 1.0.0 on there will be two variants available: * A pure ruby variant, that relies on the iconv and the stringscan extensions, which are both part of the ruby standard library. * The quite a bit faster C extension variant, which is in parts implemented in C and comes with its own unicode conversion functions and a parser generated by the ragel state machine compiler (http://www.cs.queensu.ca/~thurston/ragel). Both variants of the JSON generator escape all non-ASCII an control characters with \uXXXX escape sequences, and support UTF-16 surrogate pairs in order to be able to generate the whole range of unicode code points. This means that generated JSON text is encoded as UTF-8 (because ASCII is a subset of UTF-8) and at the same time avoids decoding problems for receiving endpoints, that don't expect UTF-8 encoded texts. On the negative side this may lead to a bit longer strings than necessarry. All strings, that are to be encoded as JSON strings, should be UTF-8 byte sequences on the Ruby side. To encode raw binary strings, that aren't UTF-8 encoded, please use the to_json_raw_object method of String (which produces an object, that contains a byte array) and decode the result on the receiving endpoint. === Author Florian Frank === License This software is distributed under the same license as Ruby itself, see http://www.ruby-lang.org/en/LICENSE.txt. === Download The latest version of this library can be downloaded at * http://rubyforge.org/frs?group_id=953 Online Documentation should be located at * http://json.rubyforge.org === Usage To use JSON you can require 'json' to load the installed variant (either the extension 'json' or the pure variant 'json_pure'). If you have installed the extension variant, you can pick either the extension variant or the pure variant by typing require 'json/ext' or require 'json/pure' You can choose to load a set of common additions to ruby core's objects if you require 'json/add/core' After requiring this you can, e. g., serialise/deserialise Ruby ranges: JSON JSON(1..10) # => 1..10 To find out how to add JSON support to other or your own classes, read the Examples section below. To get the best compatibility to rails' JSON implementation, you can require 'json/add/rails' Both of the additions attempt to require 'json' (like above) first, if it has not been required yet. === Speed Comparisons I have created some benchmark results (see the benchmarks/data-p4-3Ghz subdir of the package) for the JSON-parser to estimate the speed up in the C extension: Comparing times (call_time_mean): 1 ParserBenchmarkExt#parser 900 repeats: 553.922304770 ( real) -> 21.500x 0.001805307 2 ParserBenchmarkYAML#parser 1000 repeats: 224.513358139 ( real) -> 8.714x 0.004454078 3 ParserBenchmarkPure#parser 1000 repeats: 26.755020642 ( real) -> 1.038x 0.037376163 4 ParserBenchmarkRails#parser 1000 repeats: 25.763381731 ( real) -> 1.000x 0.038814780 calls/sec ( time) -> speed covers secs/call In the table above 1 is JSON::Ext::Parser, 2 is YAML.load with YAML compatbile JSON document, 3 is is JSON::Pure::Parser, and 4 is ActiveSupport::JSON.decode. The ActiveSupport JSON-decoder converts the input first to YAML and then uses the YAML-parser, the conversion seems to slow it down so much that it is only as fast as the JSON::Pure::Parser! If you look at the benchmark data you can see that this is mostly caused by the frequent high outliers - the median of the Rails-parser runs is still overall smaller than the median of the JSON::Pure::Parser runs: Comparing times (call_time_median): 1 ParserBenchmarkExt#parser 900 repeats: 800.592479481 ( real) -> 26.936x 0.001249075 2 ParserBenchmarkYAML#parser 1000 repeats: 271.002390644 ( real) -> 9.118x 0.003690004 3 ParserBenchmarkRails#parser 1000 repeats: 30.227910865 ( real) -> 1.017x 0.033082008 4 ParserBenchmarkPure#parser 1000 repeats: 29.722384421 ( real) -> 1.000x 0.033644676 calls/sec ( time) -> speed covers secs/call I have benchmarked the JSON-Generator as well. This generated a few more values, because there are different modes that also influence the achieved speed: Comparing times (call_time_mean): 1 GeneratorBenchmarkExt#generator_fast 1000 repeats: 547.354332608 ( real) -> 15.090x 0.001826970 2 GeneratorBenchmarkExt#generator_safe 1000 repeats: 443.968212317 ( real) -> 12.240x 0.002252414 3 GeneratorBenchmarkExt#generator_pretty 900 repeats: 375.104545883 ( real) -> 10.341x 0.002665923 4 GeneratorBenchmarkPure#generator_fast 1000 repeats: 49.978706968 ( real) -> 1.378x 0.020008521 5 GeneratorBenchmarkRails#generator 1000 repeats: 38.531868759 ( real) -> 1.062x 0.025952543 6 GeneratorBenchmarkPure#generator_safe 1000 repeats: 36.927649925 ( real) -> 1.018x 7 (>=3859) 0.027079979 7 GeneratorBenchmarkPure#generator_pretty 1000 repeats: 36.272134441 ( real) -> 1.000x 6 (>=3859) 0.027569373 calls/sec ( time) -> speed covers secs/call In the table above 1-3 are JSON::Ext::Generator methods. 4, 6, and 7 are JSON::Pure::Generator methods and 5 is the Rails JSON generator. It is now a bit faster than the generator_safe and generator_pretty methods of the pure variant but slower than the others. To achieve the fastest JSON text output, you can use the fast_generate method. Beware, that this will disable the checking for circular Ruby data structures, which may cause JSON to go into an infinite loop. Here are the median comparisons for completeness' sake: Comparing times (call_time_median): 1 GeneratorBenchmarkExt#generator_fast 1000 repeats: 708.258020939 ( real) -> 16.547x 0.001411915 2 GeneratorBenchmarkExt#generator_safe 1000 repeats: 569.105020353 ( real) -> 13.296x 0.001757145 3 GeneratorBenchmarkExt#generator_pretty 900 repeats: 482.825371244 ( real) -> 11.280x 0.002071142 4 GeneratorBenchmarkPure#generator_fast 1000 repeats: 62.717626652 ( real) -> 1.465x 0.015944481 5 GeneratorBenchmarkRails#generator 1000 repeats: 43.965681162 ( real) -> 1.027x 0.022745013 6 GeneratorBenchmarkPure#generator_safe 1000 repeats: 43.929073409 ( real) -> 1.026x 7 (>=3859) 0.022763968 7 GeneratorBenchmarkPure#generator_pretty 1000 repeats: 42.802514491 ( real) -> 1.000x 6 (>=3859) 0.023363113 calls/sec ( time) -> speed covers secs/call === Examples To create a JSON text from a ruby data structure, you can call JSON.generate like that: json = JSON.generate [1, 2, {"a"=>3.141}, false, true, nil, 4..10] # => "[1,2,{\"a\":3.141},false,true,null,\"4..10\"]" To create a valid JSON text you have to make sure, that the output is embedded in either a JSON array [] or a JSON object {}. The easiest way to do this, is by putting your values in a Ruby Array or Hash instance. To get back a ruby data structure from a JSON text, you have to call JSON.parse on it: JSON.parse json # => [1, 2, {"a"=>3.141}, false, true, nil, "4..10"] Note, that the range from the original data structure is a simple string now. The reason for this is, that JSON doesn't support ranges or arbitrary classes. In this case the json library falls back to call Object#to_json, which is the same as #to_s.to_json. It's possible to add JSON support serialization to arbitrary classes by simply implementing a more specialized version of the #to_json method, that should return a JSON object (a hash converted to JSON with #to_json) like this (don't forget the *a for all the arguments): class Range def to_json(*a) { 'json_class' => self.class.name, # = 'Range' 'data' => [ first, last, exclude_end? ] }.to_json(*a) end end The hash key 'json_class' is the class, that will be asked to deserialise the JSON representation later. In this case it's 'Range', but any namespace of the form 'A::B' or '::A::B' will do. All other keys are arbitrary and can be used to store the necessary data to configure the object to be deserialised. If a the key 'json_class' is found in a JSON object, the JSON parser checks if the given class responds to the json_create class method. If so, it is called with the JSON object converted to a Ruby hash. So a range can be deserialised by implementing Range.json_create like this: class Range def self.json_create(o) new(*o['data']) end end Now it possible to serialise/deserialise ranges as well: json = JSON.generate [1, 2, {"a"=>3.141}, false, true, nil, 4..10] # => "[1,2,{\"a\":3.141},false,true,null,{\"json_class\":\"Range\",\"data\":[4,10,false]}]" JSON.parse json # => [1, 2, {"a"=>3.141}, false, true, nil, 4..10] JSON.generate always creates the shortest possible string representation of a ruby data structure in one line. This good for data storage or network protocols, but not so good for humans to read. Fortunately there's also JSON.pretty_generate (or JSON.pretty_generate) that creates a more readable output: puts JSON.pretty_generate([1, 2, {"a"=>3.141}, false, true, nil, 4..10]) [ 1, 2, { "a": 3.141 }, false, true, null, { "json_class": "Range", "data": [ 4, 10, false ] } ] There are also the methods Kernel#j for generate, and Kernel#jj for pretty_generate output to the console, that work analogous to Core Ruby's p and the pp library's pp methods. The script tools/server.rb contains a small example if you want to test, how receiving a JSON object from a webrick server in your browser with the javasript prototype library (http://www.prototypejs.org) works.