diff options
Diffstat (limited to 'po/Makefile.in.in')
| -rw-r--r-- | po/Makefile.in.in | 403 |
1 files changed, 403 insertions, 0 deletions
diff --git a/po/Makefile.in.in b/po/Makefile.in.in new file mode 100644 index 00000000..5022b8b1 --- /dev/null +++ b/po/Makefile.in.in @@ -0,0 +1,403 @@ +# Makefile for PO directory in any package using GNU gettext. +# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <drepper@gnu.ai.mit.edu> +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU General Public +# License but which still want to provide support for the GNU gettext +# functionality. +# Please note that the actual code of GNU gettext is covered by the GNU +# General Public License and is *not* in the public domain. +# +# Origin: gettext-0.16 + +PACKAGE = @PACKAGE@ +VERSION = @VERSION@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ + +SHELL = /bin/sh +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +datarootdir = @datarootdir@ +datadir = @datadir@ +localedir = @localedir@ +gettextsrcdir = $(datadir)/gettext/po + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ + +# We use $(mkdir_p). +# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as +# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, +# @install_sh@ does not start with $(SHELL), so we add it. +# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined +# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake +# versions, $(mkinstalldirs) and $(install_sh) are unused. +mkinstalldirs = $(SHELL) @install_sh@ -d +install_sh = $(SHELL) @install_sh@ +MKDIR_P = @MKDIR_P@ +mkdir_p = @mkdir_p@ + +GMSGFMT_ = @GMSGFMT@ +GMSGFMT_no = @GMSGFMT@ +GMSGFMT_yes = @GMSGFMT_015@ +GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) +MSGFMT_ = @MSGFMT@ +MSGFMT_no = @MSGFMT@ +MSGFMT_yes = @MSGFMT_015@ +MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) +XGETTEXT_ = @XGETTEXT@ +XGETTEXT_no = @XGETTEXT@ +XGETTEXT_yes = @XGETTEXT_015@ +XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) +MSGMERGE = msgmerge +MSGMERGE_UPDATE = @MSGMERGE@ --update +MSGINIT = msginit +MSGCONV = msgconv +MSGFILTER = msgfilter + +POFILES = @POFILES@ +GMOFILES = @GMOFILES@ +UPDATEPOFILES = @UPDATEPOFILES@ +DUMMYPOFILES = @DUMMYPOFILES@ +DISTFILES.common = Makefile.in.in remove-potcdate.sin \ +$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) +DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ +$(POFILES) $(GMOFILES) \ +$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) + +POTFILES = \ + +CATALOGS = @CATALOGS@ + +# Makevars gets inserted here. (Don't remove this line!) + +.SUFFIXES: +.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update + +.po.mo: + @echo "$(MSGFMT) -c -o $@ $<"; \ + $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ + +.po.gmo: + @lang=`echo $* | sed -e 's,.*/,,'`; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ + cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo + +.sin.sed: + sed -e '/^#/d' $< > t-$@ + mv t-$@ $@ + + +all: all-@USE_NLS@ + +all-yes: stamp-po +all-no: + +# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no +# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because +# we don't want to bother translators with empty POT files). We assume that +# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. +# In this case, stamp-po is a nop (i.e. a phony target). + +# stamp-po is a timestamp denoting the last time at which the CATALOGS have +# been loosely updated. Its purpose is that when a developer or translator +# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, +# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent +# invocations of "make" will do nothing. This timestamp would not be necessary +# if updating the $(CATALOGS) would always touch them; however, the rule for +# $(POFILES) has been designed to not touch files that don't need to be +# changed. +stamp-po: $(srcdir)/$(DOMAIN).pot + test ! -f $(srcdir)/$(DOMAIN).pot || \ + test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) + @test ! -f $(srcdir)/$(DOMAIN).pot || { \ + echo "touch stamp-po" && \ + echo timestamp > stamp-poT && \ + mv stamp-poT stamp-po; \ + } + +# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', +# otherwise packages like GCC can not be built if only parts of the source +# have been downloaded. + +# This target rebuilds $(DOMAIN).pot; it is an expensive operation. +# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. +$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed + if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ + msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ + else \ + msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ + fi; \ + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --msgid-bugs-address="$$msgid_bugs_address" + test ! -f $(DOMAIN).po || { \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ + sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ + if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ + else \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + else \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + } + +# This rule has no dependencies: we don't need to update $(DOMAIN).pot at +# every "make" invocation, only create it when it is missing. +# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. +$(srcdir)/$(DOMAIN).pot: + $(MAKE) $(DOMAIN).pot-update + +# This target rebuilds a PO file if $(DOMAIN).pot has changed. +# Note that a PO file is not touched if it doesn't need to be changed. +$(POFILES): $(srcdir)/$(DOMAIN).pot + @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ + if test -f "$(srcdir)/$${lang}.po"; then \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ + cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \ + else \ + $(MAKE) $${lang}.po-create; \ + fi + + +install: install-exec install-data +install-exec: +install-data: install-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + for file in $(DISTFILES.common) Makevars.template; do \ + $(INSTALL_DATA) $(srcdir)/$$file \ + $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + for file in Makevars; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +install-data-no: all +install-data-yes: all + $(mkdir_p) $(DESTDIR)$(datadir) + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ + $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ + echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ + fi; \ + done; \ + done + +install-strip: install + +installdirs: installdirs-exec installdirs-data +installdirs-exec: +installdirs-data: installdirs-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ + else \ + : ; \ + fi +installdirs-data-no: +installdirs-data-yes: + $(mkdir_p) $(DESTDIR)$(datadir) + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkdir_p) $(DESTDIR)$$dir; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + fi; \ + done; \ + done + +# Define this as empty until I found a useful application. +installcheck: + +uninstall: uninstall-exec uninstall-data +uninstall-exec: +uninstall-data: uninstall-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + for file in $(DISTFILES.common) Makevars.template; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +uninstall-data-no: +uninstall-data-yes: + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + done; \ + done + +check: all + +info dvi ps pdf html tags TAGS ctags CTAGS ID: + +mostlyclean: + rm -f remove-potcdate.sed + rm -f stamp-poT + rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po + rm -fr *.o + +clean: mostlyclean + +distclean: clean + rm -f Makefile Makefile.in POTFILES *.mo + +maintainer-clean: distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + rm -f stamp-po $(GMOFILES) + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +dist distdir: + $(MAKE) update-po + @$(MAKE) dist2 +# This is a separate target because 'update-po' must be executed before. +dist2: stamp-po $(DISTFILES) + dists="$(DISTFILES)"; \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + dists="$$dists Makevars.template"; \ + fi; \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + dists="$$dists $(DOMAIN).pot stamp-po"; \ + fi; \ + if test -f $(srcdir)/ChangeLog; then \ + dists="$$dists ChangeLog"; \ + fi; \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + if test -f $(srcdir)/ChangeLog.$$i; then \ + dists="$$dists ChangeLog.$$i"; \ + fi; \ + done; \ + if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ + for file in $$dists; do \ + if test -f $$file; then \ + cp -p $$file $(distdir) || exit 1; \ + else \ + cp -p $(srcdir)/$$file $(distdir) || exit 1; \ + fi; \ + done + +update-po: Makefile + $(MAKE) $(DOMAIN).pot-update + test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) + $(MAKE) update-gmo + +# General rule for creating PO files. + +.nop.po-create: + @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ + echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ + exit 1 + +# General rule for updating PO files. + +.nop.po-update: + @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ + if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ + cd $(srcdir); \ + if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "msgmerge for $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +$(DUMMYPOFILES): + +update-gmo: Makefile $(GMOFILES) + @: + +Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@ + cd $(top_builddir) \ + && $(SHELL) ./config.status $(subdir)/$@.in po-directories + +force: + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |