Changes in 1.42:
	* Frob the "fast A20 gate" port as well as the keyboard
	  controller; will this help systems with problems?
	* Include some intermediate files in the distribution, plus
	  provide a "make installer" target for distributors to relink
	  the install programs only.  I would prefer the syslinux boot
	  loader proper to be "binary clean" for debuggablity -- use
	  "make clean ; make installer" to rebuild the installers only.

Changes in 1.41:
	* Don't get confused by directories, volume labels, or VFAT
	  long names.
	* Use INT 15h, AX=0E801h to query memory size before trying
	  INT 15h, AH=88h.  This not only provides more headroom
	  between the kernel and the initrd on large-memory machines,
	  but it appears some recent BIOSes actually have started
	  returning garbage for the AH=88h (older) call.
	* Trust high memory beyond the 15 MB mark if the user has
	  specified it, or if obtained with INT 15h, AH=0E801h (with
	  no memory holes above 1 MB.)

Changes in 1.40:
	* Increase A20M delay and put in a test to avoid problems on
	  certain IBM Thinkpads (thanks to Donnie Barnes of RedHat
	  for vital info on this one.)
	* Support COMBOOT style boot command images.
	* Support chain loading (foreign operating systems, e.g. DOS).
	* Include a new "copybs" DOS utility to copy a boot sector to
	  a file (under Linux, use "dd".)
	* Fix the DOS installer to work for disks over 32 MB.
	* SYSLINUX should now handle disks with more than 65536 tracks.

Changes in 1.37:
	* Fix a bug that caused "label" statements in syslinux.cfg to
	  not be handled properly.
	* Updated the documentation.  Among other things, we now allow
	  up to 128 "label" statements.

Changes in 1.36:
	* Fix for booting old (pre-initrd) kernels.
	* It seems at least some versions of OS/2 doesn't set up all
	  the fields in the superblock correctly.  Account for that.
	* Fix bug that caused boot failure when using the mem= option.

Changes in 1.35:
	* Loading from partitions now should work properly.  (Actually
	  tested, this time.  You should even be able to dd a floppy
	  to a partition and boot from it.)
	* Removed large workaround code for an alleged ancient BIOS
	  bug I have never actually seen.  The -s option should work
	  on those machines, anyway.
	* Support for simple keyboard remappings, same as used by
	  LILO (once again to support localization.)  The program
	  keytab-lilo.pl from the LILO distribution included to
	  generate such maps.
	* Added a "safe, slow and stupid" (-s) option to the
	  installers.  This option will lobotomize the boot sector to
	  hopefully work on even very buggy BIOSes.
	
Changes in 1.34:
	* Ability to load a VGA font on bootup (for localized Linux
	  distributions.) 

Changes in 1.33:
	* Bug fix in the Linux installer.
	* Added a workaround for a bug in certain AMI/Intel BIOSes
	  when booting from CD-ROM.
	* Documentation changes.

Changes in 1.32:
	* FAT16 filesystems are now supported.

Changes in 1.31:
	* Now compiles under Linux, using NASM, rather than using
	  Turbo Assembler under DOS.  See http://www.cryogen.com/Nasm
	  for information about NASM.
	* Linux-hosted SYSLINUX installer, as well as a
	  rewritten DOS installer (now is written in assembler, so we
	  don't need Turbo C.)

Changes in 1.30:
	* Added support for loading bzImage and initrd loading, and made
	  SYSLINUX new-setup-code aware (SYSLINUX 1.30 id=0x31).
	* Added LILO-style kernel labels; see the LABEL and IMPLICIT
	  keywords in README file.
	* Added support for colorization of intro and help screens.
	* The vga= option is now handled correctly.
	* Massive rewrite of large chunks of the code in order to
	  support the first two new features.

Changes in 1.20:
	* Added simple online help at the "boot:" prompt.
	* Removed 2880K image as I no longer have access to such a
	  floppy drive.	 (Donations accepted!!)
	* Decided to distribute the source in a subdirectory rather
	  than in a nested zipfile.

Changes in 1.11:
	* Removed a sanity check which would cause booting to fail on
	  Phoenix BIOS version 4.03.  Apparently this BIOS is buggy.

Changes in 1.10:
	* Added configuration file SYSLINUX.CFG.  This file contains all
	  configurable options, and can be edited from any OS which can
	  access an MS-DOS filesystem; there is no longer a need to run
	  SYSLINUX.EXE except to write the boot sector.
	* Default command line now given by "default" line in config
	  file.
	* LINUXMSG.TXT and BOOTMSG.TXT hard-coded file names replaced by
	  "display" and "prompt" lines in config file.
	* LILO-style option appending now supported ("append" line in
	  config file).
	* Prompt timeout is now supported ("timeout" line in config
	  file).  The timeout is cancelled when anything is typed on the
	  command line.
	* Pressing <ESC> or <Ctrl-C> at the Loading... stage now aborts
	  the kernel loading in progress and returns the user to the
	  boot: prompt.
	* The installer now automatically sets the READONLY flag on
	  LDLINUX.SYS.
	* Added 2880K disk image.

Changes in 1.03:
	* Fixed bug that would prevent booting from double-density
	  floppies and other DOS filesystems with multiple sectors per
	  cluster.
	* Added 720K disk image.
	* Changed default kernel name on disk images to LINUX.

Changes in 1.02:
	* Fixed bug that would garble the command line on recent kernels
	  with more than 4 sectors of setup code (this wasn't really a
	  *bug*; rather, a kernel change broke the code.  Unfortunately
	  the Linux boot interface is still sorely undocumented).
	* Added BOOTMSG.TXT file support (message file which does not
	  force display of the boot prompt).

Changes in 1.01:
	* Fixed bug on some (most?) 386 BIOSes would require two boot
	  attempts.